© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com

60

0 L

/ M

IN

© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com

Mounting PositionsMaintaining Water Levels in:• Water Storage Tanks• Water Cooling Towers• Air Conditioning Systems• High Pressure Cleaning Systems• Animal Drinking Troughs• Irrigation Applications

VORTEX FLOAT VALVE SPECIFICATION

Vortex float valves are float operated valves for use in automatic filling of water tanks, troughs, cisterns etc. The valve is configured for above water mounting. The float operates a small pilot valve which in turn operates the main diaphragm valve. Vortex float valves are a good choice where maximum flow, compact, robust, non corrosive construction and variable float levels are required.

Description

• High flow• Compact robust construction• Mounts horizontally or vertically• Made from corrosion resistant materials • Valve unscrews from tail for easy Valve seal access • Shuts down slowly to minimise water hammer• 20 - 60mm (¾” - 2 ½”) water level differential (increases as water inlet pressure increases)• Pressure rating 0.3 - 7 Bar (5 - 100 PSI)• Float position easily adjustable with no tools• Valve has switch to lock it in off position • Has port to connect Frostpro anti freeze device

eg A Vortex Float Valve with 2” BSP thread has following spec numbers VXV50

Note: Product may differ slightly from these specs due to ongoing product development.

PRODUCT CODEINLET SIZECODE

VXV 1 ¼” bsp1 ½’’ bsp2” bsp1 ¼” NPT1 ½’’ NPT2’’ NPT

3240501141122

Vortex FloatValve

Flow Graph ( All Sizes )

Features

ApplicationsTOP ENTRY WITH EXTENSION

TOP ENTRY MIDDLE EXTENSION

Two inlet diameters above overflow to avoid back siphoning N.B. Some mounting positions may not comply with local regulations

OptionsInlet Size

Specifies this Thread size

Standard Float 70mm

Floats: 70mm wide floats supplied standard.

Note: Not Suitable for underwater mounting. Refer to VXVB for Vortex underwater mounting.

NPT 1 ¼” 1 ½’’ 2”

TOP ENTRY NO EXTENSION

Tail unscrews

BSP 2”1 ¼” 1½’’

32mm 40mm 50mm1.5

1.0

0.5

0 100 200 300 400 500 600 700

2.0

2.5

Flow LPM

Imperial GPM

Inle

t Pre

ssur

e B

ar

20 40 60 80 100 120 140

35

30

25

20

15

10

5

PS

I

60

0 L

/ M

IN

3.1

VORTEX PRODUCT INFO

Vortex Dimensions

60

0 L

/ M

IN

Valve Body

White Internal Parts

Arm Assembly

Diaphragm

Seal

GF Nylon

Acetal

ABS

EPDM

Urethane

Filter

Springs, Bolts, Nuts, Pins, Screws

O’Rings

Float

PP/Nylon

304 Stainless Steel

Nitrile

HDPE

4 ¼” 108mm

1 7/16” 31mm

6 15

/16”

17

6mm

6 17/32” 164mm

6 13/16” 173mm

1 25

/32”

45

mm

2 9/

32”

58m

m

4 11

/16”

11

9mm

5 5/

32”

131m

m

Float Dimensions

70mm Float

6 13/32” 162.5mm

5 ⅞

” 14

9mm

2 ¾” 70mm

MaterialPart MaterialPart

© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com3.2

60ºC, 140ºFMaximum Operating Temperature

VORTEX DIMENSIONS & MATERIALS

2 DESCRIPTION CODE 1

2

3

4

5

6

7

8

9

10

11

VXP2010

VXP2020

VXP2030

VXP2040

VXP2050

VXP2060

VXP2070

VXP2080

VXP2090

VXP2100

VXP2110

Actuator Cap6g x 10 S/S Screw Frost Pro Plug Frost Pro O’ring Valve Cap Assembly Damping Spring Actuator Spring Bearings (set of two) Actuator Arm Bolt M6 x 65Washer M6 x 12.5

1

2

1

4

3

4

5

1

DESCRIPTIONCODE

3

2

CODE: VXV

1

2

3

4

5

VXP1010

VXP1020

VXP1030

VXP1040

VXP1050

70mm Float

Wing Bolt

Extension Arm

Bolt M5 x 12 Pan Slot

Extension Slide

1

2

3

4

VXP1

VXP2

VXP3

Float Assembly

Cap & Actuator Assembly

Diaphragm Assembly

Base Assembly

DESCRIPTION CODE

2

3

4

DESCRIPTION CODE 4Vortex Retainer

Vortex Base

Vortex O’ring

Vortex Tail 32mm

Vortex Tail 40mm

Vortex Tail 50mm

Vortex Tail 1 ¼” npt

Vortex Tail 1 ½” npt

Vortex Tail 2” npt

1

2

3

4

VXP4010

VXP4020

VXP4030

VXP4040

VXP4045

VXP4050

VXP4055

VXP4060

VXP4065

1

1

23

45

67

89

10

11

60

0 L

/ M

IN 3

DESCRIPTION CODE

1

2

VXP3

TPP3010

TPP3011

Diaphragm Assembly

Pilot Flow Filter (Fine)

Pilot Flow Filter (Coarse)

1

2

© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com 3.3

VORTEX PARTS IDENTIFICATION SHEET