6000 rapid system - power system for commercial track

2
The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated Contact the Consulting and design Centre for any lighting information. 25/01/2021 PAG 1 - ENG 6000 Rapid System - power system for commercial track Trunking: In rolled hot-dip galvanized steel, with rounded edges to protect hands. Painting: Steel stove pre-enamelling with polyester resin, white, UV-stabilized, anti-yellowing, upon phosphate treatment. Accessories: In steel with thermoplastic cover, for rotation, junction, suspension or fastening of all Disano fixtures. Regulations: Produced according to applicable standards, IP40IK08 degree of protection according to EN 60529 standards, and can be installed on normally inflammable surfaces. Provision for quick mounting of Rapid System fixtures and for power sysytem  track The track can be installed using the ceiling socket or the hanger for suspension with cable or chain. Download DXF 2D - d6000.dxf Montaggi - elettrificazione.dwg - montaccanelettr.dxf - elettr.pdf - 6000.dxf Code Gear Kg WTot Colour 132923-00 CNR-L 3.50 0 W WHITE 132900-00 S 3.00 0 W WHITE Accessories - 6045 end cap - 6050 wall mount - 6053 cord suspension - 6512 wire - 6510 hanger - 6051 ceiling/hanger mount - 6052 chain suspension - 6015 angle joint - 6010 linear joint - 6099 distr.box for pow.track - 6095 threaded bar - 6090 ceiling rose - 6036 universal connection - 6018 round joint - 6005 cover - 6070 drop-counterdrop - 6020 T joint - 6030 knife switch support - 6037 suspension hook - 6080 alignment box - 6091 supply power - 84 cable bracket - 82 Knife switch and power outlet - 6025 cross joint

Upload: others

Post on 18-Mar-2022

2 views

Category:

Documents


0 download

TRANSCRIPT

The reported luminous flux is theflux emitted by the light source witha tolerance of ± 10% compared tothe indicated value. The W totcolumn indicates the total wattageabsorbed by the system withoutexceeding 10% of the indicated

Contact the Consulting and design Centre for any lighting information. 25/01/2021 PAG 1 - ENG

6000 Rapid System - power system for commercial track

Trunking: In rolled hot-dip galvanized steel, with rounded edges to protecthands.Painting: Steel stove pre-enamelling with polyester resin, white, UV-stabilized,anti-yellowing, upon phosphate treatment.Accessories: In steel with thermoplastic cover, for rotation, junction,suspension or fastening of all Disano fixtures.Regulations: Produced according to applicable standards, IP40IK08 degree ofprotection according to EN 60529 standards, and can be installed on normallyinflammable surfaces.Provision for quick mounting of Rapid System fixtures and for power sysytem trackThe track can be installed using the ceiling socket or the hanger forsuspension with cable or chain. 

DownloadDXF 2D- d6000.dxf

Montaggi- elettrificazione.dwg- montaccanelettr.dxf- elettr.pdf- 6000.dxf

Code Gear Kg WTot Colour132923-00 CNR-L 3.50 0 W WHITE132900-00 S 3.00 0 W WHITE

Accessories

- 6045 end cap - 6050 wall mount - 6053 cord suspension - 6512 wire

- 6510 hanger - 6051 ceiling/hanger mount - 6052 chain suspension - 6015 angle joint

- 6010 linear joint - 6099 distr.box for pow.track - 6095 threaded bar - 6090 ceiling rose

- 6036 universal connection - 6018 round joint - 6005 cover - 6070 drop-counterdrop

- 6020 T joint - 6030 knife switch support - 6037 suspension hook - 6080 alignment box

- 6091 supply power - 84 cable bracket - 82 Knife switch and poweroutlet - 6025 cross joint

The reported luminous flux is theflux emitted by the light source witha tolerance of ± 10% compared tothe indicated value. The W totcolumn indicates the total wattageabsorbed by the system withoutexceeding 10% of the indicated

Contact the Consulting and design Centre for any lighting information. 25/01/2021 PAG 2 - ENG

6000 Rapid System - power system for commercial track

Accessories

- 6019 round joint end cap