60007 seat guardian · user manual 60007 keep these instructions for future reference as they...
TRANSCRIPT
User Manual
60007
Keep these instructions for future reference as they contain important information.
Adult installation required. Accessories not included.
Seat Guardian™
1 2
Instructions
Installation:
1. Unbuckle head restraint strap at top of back panel.
2. Place Seat Guardian™ in center of desired seating location. (Fig. A)
3. If vehicle is equipped with a head restraint in desired seating location, attach head
restraint strap around vehicle head restraint and adjust strap length to position
back panel of Seat Guardian™ at desired/proper height. (Fig. B)
NOTE: For intallations in vehicles without a head restraint, the back panel may
need to be folded to prevent the back panel from falling over. (Fig. C)
Removal:1. Remove child safety seat.
2. Unbuckle head restraint strap and remove Seat Guardian™ from vehicle.
3. Store in a cool, dry place.
Care: Surface Wash.
(Fig. A) (Fig. B) (Fig. C)
IMPORTANT NOTE: Always install the child safety seat in accordance to the child safety seat manufacturer’s
installation instructions. Adjust positon of Seat Guardian™ as needed to center child safety seat on Seat Guardian™.
Questions?Retain this address for future reference.
USA©2012 BRICA, Inc., 500 West 5th Street,
Suite 220, Charlotte, NC 282021.866.869.8257 • brica.com
Australia CNP Brands, PO Box 8 Deer Park VIC 3023
1 300 667 137 • cnpbrands.com.auPrinted in China
making together better®