6030 kirkwood lane n, plymouth, mn 55442, 763-658-7016 ... · trims thinlits dies (135854), snail...

6030 Kirkwood Lane N, Plymouth, MN 55442, 763-658-7016 office, 612-269-5540 cell, [email protected]

create: www.dostampingwithdawn shop:http:dostamping.stampinup.net

I'd like to take a moment during the busy holidays to tell you Thank You for your continued support of my Stampin' Up! business this year. It's people like you who contribute to the success of my business and for that, I'm truly grateful. Below you'll find a selection of project sheets using products from the 2014 Holiday Catalog. For 2015, I will be adding an exclusive newsletter for only my customers and club members (not to be confused with my public blog). These monthly (or bi-monthly) newsletters will include the following:

Be the first to know about Stampin' Up! specials

Exclusive creative projects, just for you! (you will not find these projects on my blog)

Personal specials from Dawn (again, you will not find these on my blog)

As this newsletter will be only for YOU, I will be using a new email delivery service via Mail Chimp. I hope to have it up and running in the next 30 days. Watch for your personal invitation! Happy Holidays, Dawn Olchefske

Designer Paper Chevron Technique with Endless Wishes

All images © 1990-2014 Stampin’ Up!®

Supplies:

Stamp Sets: Endless Wishes (Photopolymer136829)

Paper: Lost Lagoon (133679), Whisper White (100730)

Stamp Pads: Lost Lagoon (133644), Pear Pizzazz (131180, Smoky Slate (131179)

Misc: All Is Calm Specialty Designer Series Paper (135823), 1 ¼” Circle Punch (119861), 1 3/8” Circle Punch (119860), White Organza Ribbon (114319), Glue Dot (103683), Snail Adhesive (104332), Stampin' Dimensionals (104430), Bone Folder (102300)

Measurements:

Lost Lagoon: Backing Layer 5 1/2" x 4 1/4" and a scrap to punch with the 1 3/8” circle

Whisper White: 4" x 10 ½”, folded in half, and a scrap to punch the greeting with 1 ¼” Circle Punch.

All Is Calm Specialty Paper, 5 strips, 1” x 2 ½” each

Instructions:

1. Lay the 5 strips of designer paper like “skyscrapers” or “portrait” direction. 2. With the first 3 strips, take the top right corner and fold it so the corner is even with the left

side of the paper and forms a triangle. 3. Rotate the same piece and repeat on the other end. 4. For the last 2 strips, take the top left corner and fold it down so that the corner is even with

the right side of the paper forming a triangle. 5. Rotate and repeat. 6. Attach the folded strips to the card with SNAIL adhesive forming a chevron pattern.

For All Things


Supplies: Stamps: For All Things (#135152 Wood or #135155 Clear) - Holiday Catalog, Lots of Thanks (#129687 Wood or #129690 Clear) Paper: Whisper White (#100730), Basic Black (#121045) Ink: Memento Tuxedo Black (#134576) Misc: Big Shot Machine (#113439), Magnetic Platform (#130658), Striped Scallop Thinlit (#133734), Basic Black Baker's Twine (#134576), Stampin' Dimensionals (#104430), 2-Way Glue Pen (#100425), Waxed Paper Measurements: Whisper White: 8-1/2 x 5-1/2, 4-1/4 x 5-1/2, 3-3/4 x 5, 3 x 2-1/4 Basic Black: 3-1/4 x 2-1/2 Basic Black Baker's Twine: 33" Instructions: 1. Run the Striped Scallop Thinlit and the 4-1/4 x 5-1/2 piece of Whisper White through the Big Shot Machine using the Magnetic Platform. TIP: place a piece of Waxed Paper between the die and the card stock for easier removal. 2. Use a 2-way Glue Pen to add adhesive to the back of the die cut and attach it to the 3-3/4 x 5 piece of Whisper White, trim off the excess. 4. Wrap the Black Baker's Twine around the scallop layer as shown and secure to the back, adhere it to the main card base with Stampin' Dimensionals. 5. Stamp image and greeting on the small piece of white in Tuxedo Black Memento ink, adhere to the Basic Black layer and attach to the front of the card with Stampin' Dimensionals.

Hardwood Gentle Peace

All images © Stampin’ Up!®

Supplies:

Stamp Sets – Gentle Peace Photopolymer (139523), Hardwood (clear-mount 133035, wood-mount 133032)

Card Stock – Early Espresso 8 ½” x 11” (119686), Soft Suede 8 ½” x 11” (115318), Naturals Ivory (101849

Stamp Pads - Crumb Cake (126975), Early Espresso (126974)

Misc. – Stamping Sponges (101610), Paper Snips (103579),1 ¼” Burlap Ribbon (132140), Gift Card Envelope Trims Thinlits Dies (135854), SNAIL adhesive (104332), Stampin’ Dimensionals (104430), Glue Dots (103683), Medium Crumb Cake Envelopes (107297)

Measurements:

Early Espresso card base: 4 1/4" x 11", scored and folded at 5 1/2"

Soft Suede: 4" x 5 1/4" - need two

Naturals Ivory: 3 3/4" x 5" - need two

Naturals Ivory scrap at least 1" x 4" - need one

Threads pulled from an 8" long piece of 1 1/4" Burlap ribbon - need three Instructions:

1. Ink Hardwood Background stamp with Crumb Cake ink by patting the inkpad directly on the stamp. Lay the stamp rubber-side-up on your stamping surface. Lay a Soft Suede layer on the inked stamp. Hold in place with one hand while gently pressing the cardstock onto the stamp. Be careful not to move the cardstock while pressing or you will have a blurred image. Adhere Soft Suede layer onto front of Early Espresso card base with SNAIL. Adhere remaining Soft Suede layer inside card with SNAIL.

2. Stamp Holy Family image from Gentle Peace onto Naturals Ivory card stock with Early Espresso ink. Cut out around stained-glass window edges with Paper Snips. Sponge edges lightly with Crumb Cake ink. Adhere to card front using Stampin' Dimensionals with top of window just slightly over the top edge of the Crumb Cake layer. 3. Loop and tie three strands of burlap ribbon threads together into a knot. Gently pull the loops apart. Adhere to lower left edge of window image with a glue dot. 4. Stamp "for unto us a child is born . ." from Gentle Peace onto Naturals Ivory scrap with Early Espresso ink. Cut out with the long banner die from the Gift Card Envelope & Trims Thinlits. Sponge edges with Crumb Cake ink. Adhere below the window and over the looped burlap threads with Stampin' Dimensionals

Ornamental Pine in the Snow


Supplies:

Stamp Sets – Ornamental Pine (C #135107, W #1135104), Gorgeous Grunge (C #130517, W #130514)

Card Stock – Soft Sky (#131203), Garden Green (#102584), Whisper White (#100730)

Stamp Pads- Lost Lagoon (#133644), Garden Green (#126973), Early Espresso (#126974), VersaMark (#102283)

Misc. – Heat Tool (#129053), White Embossing Powder (#109132), Stampin’ Sponges (#101610), The Dark Crumb Cake Bledabilities Marker (#131004), Dimensionals (#104430), SNAIL (#104332)

Measurements: Soft Sky Card Base - 4 ¼” x 11”, scored at 5 ½”

Garden Green Panel - 4” x 5 ¼”

Whisper White Panel - 3 ¾” x 5”

Instructions: 7. Sponge Lost Lagoon onto the Whisper White card stock panel as shown. 8. Stamp the pine bough with the branch showing in the upper right and on the left using Garden Green

ink. Use the Dark Crumb Cake Blendabilities Marker to tap some color onto the branch. 9. Stamp the pine cone using Early Espresso ink twice onto each branch. 10. Fill in the white space with some additional pine needles stamped with Garden Green ink. 11. Stamp the sentiment with Early Espresso ink. Let the card dry for a bit. 12. Stamp the fine dots from Gorgeous Grunge onto the stamped panel with VersaMark ink. 13. Cover the panel in White Embossing Powder dumping off the excess. Heat with the Heat Tool. 14. Adhere the image panel to the Garden Green panel with SNAIL.

Adhere the Garden Green panel to the Soft Sky base card with Dimensionals.

Project Life Holiday Cheer


Supplies: Stamp Sets – Project Life Holiday Cheer (135188)

Card Stock – Whisper White Note Cards & Envelopes (131527), Mossy Meadow (133676), Crushed Curry (131199), Cajun Craze (119684), Soft Suede (115318), Whisper White cardstock (100730)

Stamp Pads – Mossy Meadow (133645), Crushed Curry (131173), Cajun Craze (126965)

Miscellaneous – Fun Fall Framelit Dies (135856), Champagne Glimmer Paper (127885), Linen Thread (104199), Stamping Sponges (101610), Stampin’ Dimensionals (104430), Glue Dots (103683)

Measurements: Mossy Meadow CS: 2” x 3-1/2”

Crushed Curry CS: 1-7/8” x 3-3/8”

Cajun Craze CS: 1/2” x 2”

Whisper White CS: 3/8” x 2”

Soft Suede CS: 1/8” x 2”

Champagne Glimmer Paper: 1” x 1”

Linen Thread: 16”

Instructions:

1. Ink leaf stamp with Crushed Curry ink and stamp in upper left & lower right corner of folded notecard. Stamp again in alternating ink colors of Mossy Meadow & Cajun Craze, cleaning stamp thoroughly between each color change.

2. Stamp “so thankful” in Mossy Meadow on the 3/8” strip of Whisper White cardstock. Cut “flag notch” on left side.

3. Sponge edges of White note card and Crushed Curry mat with Crushed Curry ink. Layer Crushed Curry mat onto Mossy Meadow mat and adhere to note card.

4. Wrap Linen Thread around strip of Cajun Craze cardstock and tie knot. Adhere White strip behind Cajun Craze strip and adhere to card.

5. Using Framelits, cut small leaf from the Champagne Glimmer Paper. Twirl strip of Soft Suede cardstock around pencil or skewer and adhere to leaf using a glue dot. Adhere to Card using a Stampin Dimensional.

Festival of Trees Chocolate Treat All images © Stampin’ Up!®

Supplies:

Stamp Sets – Festival of Trees (#135059), bundle with punch (#137640)

Card Stock – Garden Green (#105119), Cherry Cobbler (#119685), Early Espresso (#120953), Pistachio Pudding (#131294), Whisper White (#100730)

DSP – Trim the Tree Designer Series Pack (#135824)

Stamp Pads- Garden Green (#126973), Cherry Cobbler (#126966)

Misc. – Tree Punch (#135859), Word Window (#119857), Stampin Dimensionals (#104430), Whisper White Organza Ribbon (#114319), SNAIL adhesive (#104332), Chocolate squares

Measurements: 5.-1/2” x 2” Card Stock of your color choice

1-3/4” x 1-3/4” Designer Series Paper (DSP)

7” White Organza Ribbon

Scrap Whisper White

Instructions:

1. Score one end of the 2” x 5-1/2”card stock at 2-5/8", flip it over and score on the other end at 2-5/8". This should give you a nice 1/4" base for the candy.

2. Punch each end of card stock using the Scallop Tag Topper Punch. 3. Add the DSP to one side of the punched card stock (this will be your front). 4. Wrap cardstock around candy. Use a little SNAIL adhesive to attach the candy to the card stock. 5. Stamp the tree in Garden Green on scrap white paper and then stamp either the garland or dots in Cherry

Cobbler on top of tree. 6. Punch out tree using the tree punch. Adhere to the front using Stampin Dimensionals. 7. Stamp the A Merry Little Wish in Cherry Cobbler on scrap white, punch out using Word Window. 8. Adhere across the tree using Stampin Dimensionals. 9. Slip Ribbon thru top and tie in knot.

Ornamental Pine/Joy Ornament


Supplies: • Stamp Sets – Ornamental Pine (W #135104) (C #135107) • Paper– Cherry Cobbler (#119685) and Naturals White (#102316) Card Stock: Gold Foil Sheets

(#132622) • Ink – Mossy Meadow (#133645) and Versamark (#102283) Ink Pads, Early Espresso Stampin’ Write

Marker (#119680) • Misc. – Cherry Cobbler 1” Linen Ribbon (#135839), Early Espresso Embossing Powder (#128980),

Wonderful Wreath Framelit Dies (#135851), Circle Collection Framelits (#130911), Heat Tool (#129053), Big Shot (#113439), Sticky Strip (#104294), Multipurpose Liquid Glue (#110755), Candle plate from Ikea

Measurements: • Cherry Cobbler: Cut largest (scallop) circle framelit. Gold Foil: Cut 2nd largest circle framelit. Naturals

White: Cut 3rd largest circle framelit. • Cherry Cobbler ribbon - At least 24” long (or longer, depending on desired length)

Instructions: 1. Ink up pine needles with Mossy Meadow ink pad, then color branch using Espresso marker. Stamp

on Naturals White circle. Allow to dry. 2. Cut “Joy” or “Noel” from *center* of Gold Foil Circle (the circle will also be 2nd layer). 3. Stamp pinecone in Versamark and heat emboss with espresso embossing powder. 4. Adhere Cherry Cobbler scalloped circle to candle plate using Sticky Strip. Adhere gold circle to center

of Cherry Cobbler circle and the stamped pine branch circle on top of that. Adhere words with thin drip of Multipurpose glue.

5. Add ribbon through holes in top of candle plate.

Santa Stache (Nutcracker)


Supplies:

Stamp Set – Santa Stache (wood #135032, clear #135035)

Card Stock – Crushed Curry (#131199), Whisper White (#100730)

Designer Series Paper (DSP) – Under the Tree (#135825)

Stamp Pads – Tuxedo Black Memento (#132708)

Blendabilities Markers – Cherry Cobbler (#130995), Daffodil Delight (#130998), Crumb Cake (#131004), Skin Tone (#129370)

Misc. – Angled Tag Topper Punch (#133323), Large Polka Dot Textured Impressions Embossing Folder (133739), Mustache Framelit (#133741), Cherry Cobbler ½” Seam Binding Ribbon (#120992), Gold Metallic Baker’s Twine (#132975), SNAIL (#104332), Dimensionals (#104430)

Measurements:

Whisper White card base: 5 ½" x 8 ½” scored at 4 ¼”, 2” x 4”, scrap

Crushed Curry: 4" x 5 ¼”

DSP: 2” x 4”

Cherry Cobbler ribbon: 5”, Gold Baker’s Twine: 4” Instructions:

Punch DSP with Angled Tag Topper punch to create tag. Repeat with 2” x 4” piece of Whisper White card stock.

Stamp nutcracker image onto Whisper White tag using Memento ink. Stamp greeting below nutcracker.

Stamp mustache image onto scrap piece of Whisper White card stock using Memento ink. Die cut using Mustache Framelit.

Color the following with Blendabilities:

Hat – 3 shades of Cherry Cobbler, 3 shades of Daffodil Delight

Collar – 3 shades of Daffodil Delight

Hair, eyebrows, mustache – medium & dark Crumb Cake

Face – Ivory & Natural

Adhere die-cut mustache over stamped mustache on tag using Dimensionals.

String Cherry Cobbler ribbon through both tags and tie with Gold Baker’s Twine..

Emboss Crushed Curry card stock using Large Polka Dot embossing folder. Adhere to card base.

Adhere tags to card base using Dimensionals.

Seasonally Scattered


Supplies: Stamp Sets: Seasonally Scattered (W #135020), (C #135023), Good Greetings Hostess set (W #135014), (C #135017) Card Stock: Cherry Cobbler (#119685), Crumb Cake (#120953) Stamp Pads: Cherry Cobbler (#126966) Misc: Scalloped Tag Topper Punch (#133324), Project Life Corner Rounder (#135346), Cherry Cobbler 1" Sheer Linen Ribbon (#135839), Filigree Frame Textured Impressions Embossing Folder (#135818), Texture Boutique Machine (#132657), Snail Adhesive (#104332), Glue Dots (#103683) Measurements:

Cherry Cobbler - 8-1/2 x 5-1/2, 4 x 5-1/4

Crumb Cake - 2 x 4

Cherry Cobbler 1" Sheer Linen Ribbon 15" Instructions: 1. Fold 8-1/2 x 5-1/2 piece in half to form card base. 2. Stamp "Merry" image with Cherry Cobbler Ink on the 2 x 4 strip of Crumb Cake. Carefully ink just "christmas" on the "Merry Christmas stamp from Good Greetings and stamp just below the Merry image. 3. Use the Scalloped Tag Topper Punch to create scalloped end. 4. Run the 4 x 5-1/4 piece of Cherry Cobbler through the Texture Boutique Machine with the Filigree Frame Textured Impressions Embossing Folder. 5. Adhere embossed piece to the card front 6. Tie ribbon in a bow and attach to tag with Glue Dots 7. Attach tag to front of card with Glue Dots

Work of Art Christmas Tree All images © 1990-2014 Stampin’ Up!®

Supplies: Stamp Sets - Christmas Bliss (#138897 photopolymer), Work of Art (W #134111), (C #134114) Paper – Real Red (#102482), Mossy Meadow (#133676), Pear Pizzazz (#131201), Whisper White (#100730), Real Red Glimmer Paper (#121790), Dazzling Diamonds Glimmer Paper (#135315) Stamp Pads- Real Red (#126949), Mossy Meadow (#133645) Misc. – Wonderful Wreath Framelits Dies (#135851), 1/4" Circle Punch (#134364), Glue Dots (#133683), Liquid Glue (#110755), Paper Snips (#103579) Measurements:

Whisper White - 3-3/4 x 5, 1 x 3-1/4

Pear Pizzazz - 1-1/8 x 3-3/8

Mossy Meadow - 3-7/8 x 5-1/8

Real Red - 8-1/2 x 5-1/2 Instructions: 1. Ink long brush stroke stamp in Mossy Meadow and stamp near the bottom of the Whisper White layer. Without reinking, stamp again above and slightly to the left of the first image. 2. Ink the stamp again and stamp above and slightly to the left of the previous stamped image. Without reinking, stamp again above and slightly to the left of the previous image. Repeat this process until you reach the top of the card stock. Layer this on the Mossy Meadow layer and them to the card. 3. Using the bow die in the Wreath Framelits set, cut a bow from Red Glimmer Paper and attach to the top of the "tree" with a Glue Dot, add a 1/4" Circle from Dazzling Diamonds Glimmer Paper. 4. Use the 1/4" Circle Punch to create small dots from the Red Glimmer Paper and randomly place on the "tree" with Glue Dots. 5. Ink Merry Christmas stamp in Real Red and stamp on the 1" strip of Whisper White, flag the ends with Paper Snips. 6. Adhere to the strip of Pear Pizzazz and flag the ends. Attach to the front of the card.

Hello Fall


Supplies:

Stamp Sets: Holiday Home Bundle (137631), Lovely As A Tree (w-128655, c-127793)

For All Things (w-135152, c-135155) Card Stock/DSP: Very Vanilla (101650), Soft Suede (115318), Cherry Cobbler (119685),

Crushed Curry (131199), Flashback DSP (133699) Stamp Pads: Tuxedo Black Momento Pad (132708), Soft Suede (126978), Cherry Cobbler (126966),

Crushed Curry (131173), Pumpkin Pie (126945), Soft Sky (131181) Accessories/Embellishments: Linen Thread (104199), Pearl Basic Jewels (119247), Tiny Triangles Embossing Folder

(133740), Framelits Ovals Collection (129381), Fun Fall Framelit Dies (135856), Stampin’ Sponges (101610), Stampin’ Dimensionals (104430)

Measurements: Very Vanilla 5 ½” x 8 ½”; 4 ½” x 3 ¼”; 2 ¼” x ¾”

Soft Suede 4” x 5 ¼”; 1” x 2” (for die cutting leaf)

Cherry Cobbler 3 ¾” x 5”, 2 ½” x 1 ½” (for die cutting house)

Crushed Curry 1” x 2” (for die cutting leaf)

Flashback DSP 2 ½” x 1 ½” (for die cutting house)

Instructions: 1. Stamp the house with black ink onto the Flashback DSP, Stamp again with Black ink onto small Cherry Cobbler Piece. Die

cut both pieces using the House Die. From the Cherry Cobbler house, cut the roof and the door and adhere onto the DSP house. TIP: I cut the end of the chimney from the DSP house and glued it onto the cherry cobbler roof to give it more of a layered dimension). Place a medium size pearl at the door knob.

2. To cut the ovals from both the Cherry Cobbler and the Soft Suede – It’s easier if you adhere both layers together with just a little bit of adhesive in the center. Be sure the Cherry Cobbler layer is centered onto the Soft Suede. Using the 4

th oval from

the center of the framelit set, cut through both layers. Now using the next largest oval, cut only the Cherry Cobbler piece centering the oval framelit with the smaller opening.

3. Run the Cherry Cobbler piece through the Big Shot using the Tiny Triangles Embossing Folder. 4. Adhere the Cherry Cobbler embossed oval frame to the soft suede oval frame, making sure the ovals are centered with

each other. 5. Using 2 strands of linen thread (about 4 ½” each) tie and knot around the right edge of the oval frame. 6. Stamp the trees from Lovely As A Tree onto the 4 ½” x 3 ¼” Very Vanilla cardstock with Soft Suede ink. 7. Stamp the small leaves randomly along the ground using a variety of colors. Lightly sponge the sky using Soft Sky Ink. 8. Stamp the banner from the stamp set For All Things using Crushed Curry Ink. Stamp Hello Fall on top of this…cut around

the banner using your scissors….no framelit here – sorry! 9. Using the leaf framelet, die cut 2 leaves in each of soft suede and crushed curry. Adhere these back to back with each

other catching the end of the linen thread in between the layers. 10. Tape the Stamped Very Vanilla panel flat to the Very Vanilla Card. Using dimensionals adhere the oval framed pieces to

your card. 11. Using dimensionals adhere the house in the oval section of your card. Also with dimensionals place your sentiment onto

your card.

Thankful For


Supplies:

Stamp Sets: I’m Thankful for you (#135170) Four Feathers (#135053)

Card Stock: Very Vanilla (#101650) Lost Lagoon (#133679) Basic Black (#121045)

Inks: Tangelo Twist (#133646) Memento Black Ink (#132708)

Other: Typset Designer Paper (#133704), Feathers Framelits (#135852), 1 ¾ Circle Punch (#119850), Venetian Crochet Trim (#134581) Linen Thread (#104199), Little Letter Thinlits (#133730)

Measurements: Very Vanilla – 8 ½ x 5 ½ - scrap for feathers

Typeset DSP – 4x3

Basic Black 1x4 – small scrap for U – small piece for banner

Real Red – scrap for star

Lost Lagoon - scrap for punch

Crochet Trim - 5”

Instructions:

1. Fold 8 ½ x 5 ½ piece of Very Vanilla in half 2. Ink up just the words on the I’m Thankful stamp with Memento black – stamp on top of vanilla cardstock 3. Adhere Typeset to bottom ½ of card 4. Adhere Crochet trim to strip of black cardstock 5. Adhere #4 to card front 6. Stamp feathers in Tangerine Twist and Memento Black on scrap vanilla cardstock 7. Die cut feather images with Feathers framelits 8. Die cut letter U from little letter thinlits

9. Punch 1 ¾ circle from Lost Lagoon cardtock 10. Assemble circle punch, feathers, letter U as seen in picture – adhering to card front 11. Cut length of linen thread tying into bow –adhere to feathers

6030 kirkwood lane n, plymouth, mn 55442, 763-658-7016 ... · trims thinlits dies (135854), snail...

Documents