MT 625 / 732 CONSTRUCTION TELESCOPIC HANDLER SPECIFICATIONS & DIAGRAMS

MANITOU AMERICAS, INC. • PO Box 179 • West Bend, WI 53095

Tel: 262-334-9461 • Fax: 262-338-7517 • www.manitou.com ©2015 Manitou Americas, Inc. Manitou. All rights reserved. Printed in the U.S.A. MTSERIES_6pg_06/15-1.5M

This publication in no way constitutes an

offer and the company reserves the right to alter

specifications without notice.

MT 625 MT 732Maximum Lift Capacity – 24” Load Center (kg) 5,500 lbs. (2495) 7,000 lbs. (3175)

Maximum Lift Height (m) 19′2″ (5.85) 22′8″ (6.90)

Capacity at Maximum Lift Height (kg) 4,400 lbs. (2000) 5,500 lbs. (2500)

Maximum Forward Reach (m) 11'1" (3.40) 13'3" (4.04)

Capacity at Maximum Reach (kg) 1,650 lbs. (750) 2,000 lbs. (905)

Cycle Times – Unloaded

Lifting 8.0 sec. 6.8 sec.

Lowering 5.4 sec. 5.8 sec.

Boom Extension 5.6 sec. 6.8 sec.

Boom Retraction 4.3 sec. 4.7 sec.

ENGI

NE Type Kubota Tier IV Deutz Tier IV

Power (kW) 74 hp (55.4) 74 hp (55.4)

Displacement (cm3) 4 cyl. 203 cu. in. (3331) 221 cu. in. (3621)

Maximum Torque @ 1400 rpm (Nm) 195 ft.lbs. (265) 302 ft.lbs. (410)

Injection / Cooling Direct / Water Electronic / WaterTR

ANSM

ISSI

ON Type Hydrostatic Torque Converter

Maximum Travel Speed (km/hr) 15.5 mph (25) 15.5 mph (25)

HYDR

AULIC

S Pump Type Gear Gear

Pressure (bar) 3408 psi (235) 3822 psi (260)

Flow Rate (L/min.) @ 1600 rpm 13.2 gpm (50) 27.5 gpm (104)

CAPA

CITIES Hydraulic Oil (L) 30.3 gal. (115) 33.8 gal. (128)

Fuel Tank (L) 16.6 gal. (63) 31.7 gal. (120)

SPEC

IFICA

TIONS Weight – with Forks (kg) 10,582 lbs. (4800) 14,947 lbs. (6,780)

Turning Radius (m) 10′10″ (3.31) 12′6″ (3.80)

1. Ground Clearance (mm) 13″ (330) 18″ (450)

2. Overall Length (m) 12′9" (3.89) 15'7" (4.76)

3. Wheel Base (m) 7'6" (2.30) 9'3" (2.81)

4. Cab Width (mm) 2'7″ (797) 2'11″ (890)

5. Overall Width (m) 5'11″ (1.81) 7'8″ (2.34)

6. Overall Height (m) 6'4″ (1.92) 7'7″ (2.30)

Breakout Force (daN) 7,704 lbf. (3427) 12,971 lbf. (5770)

Maximum Drawbar Pull (daN) 7,261 lbf. (3230) 11,982 lbf. (5300)

TIRES 12-16.5 12PR 400/80 R24

KEY

PER

FORM

ANCE

23

6

1

5

4

4

2

5

1

3

6

4

2

5

1

3

6

� Air Conditioning*

� Centralized Grease Points (MT 625 only)

� Comfort Ride Control (CRC)

� Dual Hydraulic Auxiliary System*

� Hand Throttle Control* (MT 625 only)

� Hydraulic Locking / Quick Disconnect

� Manual Tow Hitch

� Return to Hydraulic Tank Line

� Windshield Protector- Front Window

� Work Lights - Two on Boom*

STANDARD FEATURES

OPTIONAL FEATURES

� 4-Wheel Drive

� Tier IV-Certified

� Automatic Parking Brake

� Back-Up Alarm and Horn

� Battery Cut-Off

� Complete Road Lights

� Cyclonic Pre-Cleaner

� Enclosed Cab with Heat/Defrost orSemi-Enclosed Cab on MT 625

� Front/Rear Wipers

� Full Instrumentation

� Hydraulic Steering

� Hydrostatic Transmission

� JSM® Joystick Controls- Loader Type

� Lockable Engine Compartment

� One Auxiliary Circuit to Boom Tip

� Quick-Fit Tool System

� RH & LH Mirrors

� Roof and Windshield Sunshade

� Three Steering Modes

� Vinyl Seat with Seat Belt

*Options not available with Semi-Enlcosed Cab