6410stepperdrive userinstructions manual en-us reva
DESCRIPTION
6410StepperDrive UserInstructions Manual en-us RevATRANSCRIPT
-
902-641002-02 Rev C
www.DanaherMotion.com
6410 Heatsink Assembly Instructions Use these instructions to install the heatsink acessory kit (Part number HS-6410) on the 6410.
Parts List The following is a list of materials and quantities that you will need to attach the 6410 heatsink.
Silpad (847-016411-01) - 1 Heatsink (172-641002-01) - 1 Screws (809-040706-10) - 4
Note
BOLD values indicate quantities.
1. Remove the 4 screws from the heatsink accessory kit.
2. Place the Heatsink with the Silpad on the 6410.
3. Insert the screws through the slots in the 6410, into the heatsink and tighten to 15 1 in-lb. DO NOT over-tighten or thread damage may result.