6706 timber defects

19
Level 1 Diploma in Carpentry and Joinery © 2013 City and Guilds of London Institute. All rights reserved. 1 of 19 Unit 115: Produce woodworking joints Timber defects

Upload: kevin-porter

Post on 15-Apr-2017

98 views

Category:

Education


0 download

TRANSCRIPT

Page 1: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 1 of 19

Unit 115: Produce woodworking joints

Timber defects

Page 2: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 2 of 19

Aims and objectivesAim: Introduce learners to timber defects.

Objectives:• List at least two defects found in timber.• State at least two seasoning defects.• List at least two natural defects.• State at least one term for knots found in timber.

Page 3: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 3 of 14

Timber defectsDefects are faults that are found in timber. Some present a serious structural weakness in the timber, others do little more than spoil its appearance.

Defects can be divided into two groups: 1. Seasoning defects 2. Natural defects

Page 4: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 4 of 19

Seasoning defectsSeasoning defects can be further divided into:• Bowing• Springing• Winding (or twist)• Cupping• Shaking• Collapse• Case hardening

Page 5: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 5 of 19

Bowing

Bowing is usually caused by poor stacking during seasoning. It is a serious defect, causing good timber to be suitable only for use in short lengths.

Page 6: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 6 of 19

Springing

Springing is a edge way curvature of a board. It is usually caused by the release of internal stresses during seasoning.

Page 7: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 7 of 19

Winding or twist

Winding, is also known as twist, is very serious as it restricts the use of the timber to short lengths. It is caused by poor seasoning and poor stacking.

Page 8: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 8 of 19

Cupping

Cupping is very common in flat sawn boards. It occurs through shrinkage of the timber when drying.

Page 9: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 9 of 19

Shaking

Shaking is caused by the board being dried too rapidly. It is particularly common at the ends of boards, spreading along the grain.

Page 10: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 10 of 19

Collapse

Collapse is a rare defect caused by too rapid drying in the early stages of seasoning. The moisture is drawn out too rapidly causing dehydrated cells to collapse.

Page 11: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 11 of 19

Case hardening

Case hardening is caused by too rapid drying, resulting in the outside cells of the timber drying and hardening, sealing off the moisture in the central part of the board.

Page 12: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 12 of 19

Natural defects

Natural defects can be further divided into:• Knots• Heart shakes• Cup shakes• Star shakes

Page 13: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 13 of 19

Knots• Knots mainly occur in softwood and mark the origin of a

branch in the tree.• Knots are termed either ‘dead’ or ‘live’ depending on the

condition of the branch which caused it. • Dead knots are often loose. • Small live knots are no real problem. • Small dead knots and large knots, either dead or live,

are a serious structural weakness.

Page 14: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 14 of 19

Knots

Page 15: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 15 of 19

Heart shakes• Heart shakes are usually the result of disease or over-

maturity of the tree. • The shakes radiate from the centre of the log and are

caused by internal shrinkage.

Page 16: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 16 of 19

Cup shakes• Cup shakes, also known as ring shakes, are caused by a

separation of the annual rings and are usually due to a lack of nutrient or twisting of the tree in high winds.

• In bad cases, economic conversion of the log is very difficult.

Page 17: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 17 of 19

Star shakes• Star shakes are radial cracks which occur around the

outside of the log. They are caused by shrinkage at the outside of the log while the middle remains stable.

• This is usually because the log has been left too long before conversion.

Page 18: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 18 of 19

Aims and objectivesAim: Introduce learners to timber defects.

Objectives:• List at least two defects found in timber.• State at least two seasoning defects.• List at least two natural defects.• State at least one term for knots found in timber.

Page 19: 6706 timber defects

Level 1 Diploma in Carpentry and Joinery

© 2013 City and Guilds of London Institute. All rights reserved. 19 of 19

Any questions?