6th aircraft structural design conference programme

6TH AIRCRAFT STRUCTURAL DESIGN CONFERENCE

CONFERENCE PROGRAMME

Structures and Materials Conference

BRISTOL / 9-11 OCTOBER 2018




DAY 1 - TUESDAY 9 OCTOBER

(A.1) DESIGN AND MANUFACTURING CONSTRAINTS WITHIN THE GRADIENT - BASED OPTIMAZATION OF A COMPOSITE AIRCRAFT WINGBOX Speakers: Edgar Werthen, Sascha Dähne, DLR - German Aerospace Centre, Institute of Composite Structures and Adaptive Systems

(A.2) DESIGN OPTIMISATION OF A CFRP WING COVER FOR THE AFP PROCESS Speakers: Christian Ückert, Dominik Delisle, Tobias Bach, Prof. Dr.-Ing. Christian Hühne , Dr.-Ing. Jan Stüve

8.15

9.00

9.15

10.00

10.30

11.00

11.30

12.15

12.45

13.15

14.15

(B.1) NON-LINEAR AEROELASTIC BEHAVIOUS OF HINGED WING TIPS Speakers: Thomas Wilson, Andrea Castrichini, John Paterson, Raul Arribas Ardura, Airbus, Imperial College London

(B.2) AEROELASTIC TAILORING USING NOVEL MANUFACTURING TECHNIQUES Speakers: Max Opgenoord, Karen Willcox, Massachusetts Institute of Technology

(D.1) THE DYNAMIC RELEASE OF THE SEMI AEROELASTIC HINGE WING-TIP DEVICE Speaker: Andrea Castrichini, Thomas Wilson, Airbus Jonathan E Cooper, University of Bristol

Registration & Refreshments

OPENING REMARKSChairman: Malcolm Nash, FRAeS, Royal Aeronautical Society

KEYNOTE Speaker: Mark Howard AMRAeS, Head of R&T Business Development and Partnerships UK, Airbus Group

(C.1) STRINGER-CONCEPT EVALUATIONS WITH MULTIDISCIPLINARY GRADIENT BASED OPTIMIZATION OF COMPOSITE WING STRUCTURES Speaker: Sascha Dähne, Edgar Werthen, DLR German Aerospace Center, Institute of Composite Structures and Adaptive Systems

(C.2) MINIMUM WEIGHT STRUCTURAL OPTIMISATION PROCEDURE FOR THE PRELIMINARY SIZING OF A COMPOSITE WING OF A COMPOUND HELICOPTER Speaker: Dr Andrea Cini, The University of Nottingham

Networking Refreshment Break

Networking Lunch

KEYNOTE Speaker: Paul Weaver, Bernal Chair in Composite Materials and Structures, University of Limerick

KEYNOTE Speaker: Mark Summers, Head of Technology (Manufacturing, Materials, & Structures), Aerospace Technology Institute

ROOM 1

SESSION A– OPTIMIZATION (PART 1) CHAIR: PROF ALAN MORRIS, FRAeS

SESSION B– AEROELASTICITY (PART 1) CHAIR: PETER HOPGOOD

ROOM 2

SESSION C– OPTIMIZATION (PART 2) CHAIR: PROF ALAN MORRIS, FRAeS

SESSION D– AEROELASTICITY (PART 2) CHAIR: PETER HOPGOOD

BRISTOL / 9-11 OCTOBER 2018

(G.1) PRELIMINARY WING HIGH-LIFT MECHANISMS DESIGN AND COMPUTATIONAL KINEMATICS OPTIMISATION Speakers: Kamal Haider, A. Mark Savill and Timoleon Kipouros, Cranfield University

(G.2) CONCURRENT OPTIMIZATION OF STRINGERS TOPOLOGY AND SKIN FIBER PATTERN IN GRID STIFFENED COMPOSITE STRUCTURES Speaker: Ali Elham, Braunschweig University of Technology (G.3) TOPOLOGY OPTIMISATION OF A WING WITH SPLIT-SCIMITAR WINGLET Speakers: Elliott Karl Bontoft, Vassili Toropov, Queen Mary University of London

15.00

15.30

16.00

16.30

17.00

17.30

18.00

DAY 1 - TUESDAY 9 OCTOBER

(H.1) SOME ASPECTS FOR FLUTTER ANALYSIS OF AIRCRAFT WITH LAMINAR WING Speakers: S. Kuzmina, F. Ishmuratov, O. Karas, Central Aerohydrodynamic Institute (TsAGI) Russia (H.2) NEGATIVE STIFFNESS MECHANISM FOR BIDIRECTIONAL MORPHING AIRCRAFT ACTUATION Speakers: Jiaying Zhang, Alexander D. Shaw, Amoozgar Mohammadreza Michael I. Friswell, College of Engineering, Swansea University


FIRST DAY CONCLUDES

(E.2) PRELIMINARY SIZING OPTIMISATION OF AIRCRAFT STRUCTURES - INDUSTRIAL CHALLENGES AND PRACTICES Speakers: Lucian Iorga, Airbus Operations Ltd, Vincent Malmedy, Sogeti Ltd Olivia Stodieck, Department of Aerospace

(F.2) AN EFFICIENT ALGORITHM FOR DETERMINING FLUTTER OF GEOMETRICALLY NONLINEARLY DEFORMED AIRCRAFT Speakers: Christopher A. Lupp and Carlos E.S. Cesnik, Dept. of Aerospace Engineering, University of Michigan

(E.1) LARGE SCALE OPTIMISATION FOR SIZING OF AIRCRAFT STRUCTURES SUBJECT TO FATIGUE AND DAMAGE TOLERANCE REQUIREMENTS Speakers: Lucian Iorga, Vincent Malmedy, Geoffrey Morris, Francesco Albani, Andrey Polynkin, Airbus Operations Ltd., Sogeti Ltd.

(F.1) AEROELASTIC TOOLKITS AND DEVELOPMENTS FOR MAPPING CFD RESULTS Speaker: Mike Coleman, MSC Software

ROOM 1 ROOM 2

SESSION E– OPTIMIZATION (PART 3) CHAIR: PROF ALAN MORRIS, FRAeS

SESSION F– AEROELASTICITY (PART 3) CHAIR: PETER HOPGOOD

SESSION G– OPTIMIZATION (PART 4) CHAIR: PROF ALAN MORRIS, FRAeS

SESSION H– MORPHING (PART 1) CHAIR: PETER HOPGOOD




DAY 2 - WEDNESDAY 10 OCTOBER

(J.1) FRAMEWORK ON THE CRAIG-BAMPTON (C-B) MODELING ON THE LOADS RECOVERY Speakers: Haroon Awais Baluch, Ph.D., Hasnain Tahir, Center of Advanced Studies in Engineering, Pakistan, University of Engineering and Technology

(J.2)EFFECT OF IMPROVED FLIGHT AND CONTROL LOADS MODELLING ON WING-BOX PRELIMINARY SIZING Speakers: Paul Lancelot, Roeland De Breuker, Faculty of Aerospace Engineering, Delft University of Technology, the Netherlands

(L.1) NUMERICAL APPROACHES TO THE SETTING OF AIRCRAFT IN-FLIGHT TARGET LOADS PROBLEM Speakers: S. Hernandez, A. Baldomir, C. Cid, School of Engineering, University of Coruña

(L.2) WORST CASE GUST LOADS DUE TO CONTINUOUS TURBULENCE FOR HIGHLY FLEXIBLE AIRCRAFT Speaker: Robbie Cook, Simon, Jonathan Cooper, University of Bristol

(I.1) STRUCTURAL OPTIMISATION OF A MORPHING LEADING EDGE Speakers: C. Wang, H. Haddad Khodaparast, M.I. Friswell, A. Magrini, R. Ponza, E. Benini, V. Landersheim, D. Laveuve & C. Contell Asins (I.2) CROSS-SECTIONAL DESIGN OF A COMPOSITE ROTOR BLADE FOR TWIST MORPHING Speakers: M.R. Amoozgar, A.D. Shaw, J. Zhang, M.I. Friswell, College of Engineering, Swansea University

(K.1) INFLUENCE OF DESIGN AND PRODUCTION PARAMETERS ON THE GEOMETRICAL QUALITY OF AN AIRCRAFT LEADING EDGE FOR NATURAL LAMINAR FLOW Speakers: Olaf Steffen, DLR - German Aerospace Centre, Institute of Composite Structures and Adaptive Systems, Center for Lightweight-Production-Technology

(K.2) THE APPLICATION OF KNOWLEDGE BASED ENGINEERING TO DESIGN FOR WIRE+ARC ADDITIVE MANUFACTURE (WAAM) Speaker: Dr Helen Lockett, The Open University (K.3) MATHEMATICAL CORRELATIONS AND EQUATIONS FOR THE PRELIMINARY DESIGN OF ALL-ELECTRIC AIRCRAFT Speakers: Jose Alejandro Posada-Montoya, Juan Felipe Correa-EscobarMechanical Engineering Department, Pascual Bravo University Institution, Medellín, Aeronautical Department, Vortex

9.00

9.15

10.00

10.30

11.00

11.30

12.00

12.30

13.00


OPENING REMARKSChairman: Malcolm Nash, FRAeS, Royal Aeronautical Society

KEYNOTE Speaker: Afzal Suleman, Professor, University of Victoria, Canada


SESSION I– MORPHING (PART 1) CHAIR: PETER HOPGOOD

SESSION J– LOADS/LOADING (PART 1) CHAIR: DR ADRIAN MURPHY, MRAeS

SESSION K– DESIGN (PART 1) CHAIR: TBC

SESSION L– LOADS/LOADING (PART 2) CHAIR: DR ADRIAN MURPHY, MRAeS

Networking Lunch

ROOM 1 ROOM 2

BRISTOL / 9-11 OCTOBER 2018DAY 2 -WEDNESDAY 10 OCTOBER

14.15

15.00

15.30

16.00

16.30

17.00La Sap

17.30

18.00

(N.1) HIGH FIDELITY CFD/CSM ANALYSIS OF A FOLDING WING-TIP DEVICE FOR AIRCRAFT LOADS ALLEVIATION Speaker: Carmine Valente, Andrea Castrichini , Thomas Wilson - Airbus, Alessandro Landi , Franco Mastroddi - University of Rome “La Sapienza” Jonathan E Cooper, Dorian Jones, Ann Gaitonde, - University of Bristol.

(P.1) EFFECT OF SPATIALLY VARYING MATERIAL PROPERTIES ON THE POSTBUCKLING BEHAVIOUR OF COMPOSITE BEAMS UTILISING GEODESIC STOCHASTIC FIELDS Speakers: Sander van den Broek, Sergio Minera, Eelco Jansen, Paul Weaver, and Raimund Rolfes, Institute of Structural Analysis, Leibniz Universit and Bristol Composites Institute, University of Bristol.

(P.2) ON THE APPLICATION OF FRACTURE MECHANICS TO THE SIZE SCALING OF BONDED COMPOSITE LAP JOINTS Speakers: Yiding Liu, Stuart Lemanski, Xiang Zhang, Centre for Manufacturing and Materials Engineering, Coventry University (P.3) THE INFLUENCE OF POISSON RATIO MISMATCH AND UNCONVENTIONAL LAYUPS ON THE SKIN-STRINGER BONDLINE OF STIFFENED COMPOSITE WING PANELS Speakers: Tobias Bach, Prof. Dr.-Ing. Christian Hühne, DLR - German Aerospace Centre, Institute of Composite Structures and Adaptive Systems

(P.4) DEVELOPMENTS IN COMMERCIAL ANALYSIS METHODS FOR 3D WOVEN COMPOSITES IN THE AEROSPACE INDUSTRY Speakers: Andrew Main, MSC Software

(M.1) DESIGN, VALIDATION AND CERTIFICATION OF BUSINESS JET AND VIP INTERIOR COMPONENTS UTILIZING POLYMERIC ADDITIVE MANUFACTURING Speaker: Brett Peterson, Bristol Aero (M.2) PRELIMINARY DESIGN OF AN ALL-ELECTRIC COMMUTER AIRCRAFT Speakers: Sohail Ahmad Barits, Almutasim Ibrahem, Ming Dao Liu, Shem Anthony Siqueira, Philip Skinner, Elliot Karl Bontoft, Ranjan Vepa and Vassili Toropov, Queen Mary University of London

(O.1) COMPARISON OF STRUCTURAL REDUCED ORDER MODELS APPLIED TO A DETAILED WING BOX Speakers: Renato Medeiros, Carlos Cesnik, Olivia Stodieck, Dario Calderon, Jonathan Cooper, Etienne Coetzee, Dept of Aerospace Engineering, University of Michigan, Dept of Aerospace Eng, University of Bristol, Airbus Operations Ltd (O.2) STRUCTURAL SIZING FOR PRELIMINARY WING MASS ESTIMATION OF A BOX WING AIRCRAFT Speakers: Islam ElQatary, Eike Stumpf, Institute of Aerospace Systems (ILR), RWTH Aachen University, Germany


SECOND DAY CONSLUDES

SESSION M– DESIGN (PART 2) CHAIR: TBC

SESSION N– LOADS/LOADING (PART 1) CHAIR: DR ADRIAN MURPHY, MRAeS

SESSION O– STRUCTURES (PART 1) CHAIR: PROF ALAN MORRIS, FRAeS

SESSION P– CFRP (PART 2) CHAIR: TBC

ROOM 1 ROOM 2

KEYNOTE Speaker: Alan Prior, Vice President, Worldwide Centre of Simulation Excellence, SIMULIA

SESSION P– CFRP (PART 1) CHAIR: TBC




DAY 3 - THURSDAY 11 OCTOBER

(Q.1) A REVIEW OF THE ANALYTICAL METHODS USED FOR SEAPLANES PERFORMANCE PREDICTION Speaker: Jafar Masri, Northumbria University

(Q.2) STRAIN-LIFE FATIGUE TESTING OF ADDITIVE LAYER MANUFACTURED TITANIUM ALLOY TI-6AL- 4V BY ELECTRON BEAM MELTING Speaker: Rob Plaskitt, Dr Michelle Hill, HBM Prenscia

(R.1) ADAPTIVE MODEL CALIBRATION FOR REAL-TIME MONITORING OF AIRCRAFT COMPOSITE STRUCTURES Speaker: Laura Mainini, Marco Gherlone and Massimiliano Mattone, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Department of Aeronautics and Astronautics, MIT

(R.2) INTRODUCTION TO PERFORMANCE ENVELOPES AND ITS APPLICATION ON A STIFFENED PANEL Speaker: S. Sheshanarayana, C. Armstrong, A. Murphy, T. Robinson, School of Mechanical and Aerospace Engineering, Queen’s University Belfast

(U.1) LOW DIMENSIONAL FINITE ELEMENT BASED MODELS FOR BUCKLING AND NONLINEAR VIBRATION OF DELAMINATED PLATES Speaker: Eelco Jansen, Tanvir Rahman, Leibniz Universität Hannover, Institute of Structural Analysis, 2DIANA FEA BV, The Netherlands (U.2) SIMULATION INTENT FOR MULTI-FIDELITY ANALYSIS OF COMPOSITE AIRCRAFT STRUCTURES Speaker: C. Harley, D. Quinn, T.T. Robinson and D. Nolan, School of Mechanical & Aerospace Engineering, Queens University Belfast

(S.1) ANALYSIS OF WRAPTOR COMPOSITE TRUSS STRUCTURES Speaker: Chris Hunt, Prof Michael Wisnom, Dr Benjamin Woods, University of Bristol (S.2) OSTBUCKLING ANALYSIS OF COMPOSITE PANEL UNDER SHEAR LOAD Speaker: Kai Zhao, David Kennedy, Carol Featherston, School of Engineering, Cardiff University

9.00

9.15

10.00

10.30

11.00

11.30

12.00

12.30


OPENING REMARKSChairman: Alan Morris, FRAeS, Royal Aeronautical Society

KEYNOTE Speaker: Roger Assaker, Chief Material Strategist, MSC Software Corporation


CLOSING REMARKS Speaker: Prof Alan Morris, FRAeS, Royal Aeronautical Society & Prof Paul Weaver, University of Limerick

ROOM 1

SESSION R – STRUCTURES (PART 3) CHAIR: PROF ALAN MORRIS, FRAeS

SESSION S – CPRP (PART 2) CHAIR: PETER HOPGOOD

SESSION Q– STRUCTURES (PART 2) CHAIR: DR ADRIAN MURPHY, MRAeS

SESSION U– CPRP (PART 1) CHAIR: MALCOM NASH, FRAeS

ROOM 2

6th aircraft structural design conference programme

Documents