717 personal edition installation
TRANSCRIPT
-
8/9/2019 717 Personal Edition Installation
1/15
ega 7.1.7 Personal Edition Installation Guide
sion 7.1.7
-
8/9/2019 717 Personal Edition Installation
2/15
© Copyright 2015
Pegasystems Inc., Cambridge, MA
All rights reserved.
This document describes products and services of Pegasystems Inc. It may contain trade secrets and proprietary
information. The document and product are protected by copyright and distributed under licenses restricting their use,
copying distribution, or transmittal in any form without prior written authorization of Pegasystems Inc.
This document is current as of the date of publication only. Changes in the document may be made from time to time at the
discretion of Pegasystems. This document remains the property of Pegasystems and must be returned to it upon request.
This document does not imply any commitment to offer or deliver the products or services described.
This document may include references to Pegasystems product features that have not been licensed by your company. If
you have questions about whether a particular capability is included in your installation, please consult your Pegasystems
service consultant.
For Pegasystems trademarks and registered trademarks, all rights reserved. Other brand or product names are trademarksof their respective holders.
Although Pegasyst ems Inc. strives for accuracy in its publications, any publication may contain inaccuracies or
typographical errors. This document or Help System could contain technical inaccuracies or typographical errors. Changes
are periodically added to the information herein. Pegasystems Inc. may make improvements and/or changes in the
information described herein at any time.
This document is the property of:
Pegasystems Inc.
One Rogers Street
Cambridge, MA 02142-1209
Phone: (617) 374-9600
Fax: (617) 374-9620
www.pega.com
Document: Pega 7.1.7 Personal Edition Installation Guide
Software Version: Pega 7.1.7
Updated: Friday, January 02, 2015
-
8/9/2019 717 Personal Edition Installation
3/15
Contents
Introduction 2
What Gets Installed 2
Prerequisites 3
Installing Personal Edition 4
Using Shortcuts to Start, Log in and Shutdown Personal Edition 11
Starting Personal Edition 11
Logging into Personal Edition 11
Shutting down Personal Edition 11
Uninstalling Personal Edition 13
Personal Edition Installation Guide 1
-
8/9/2019 717 Personal Edition Installation
4/15
Introduction
Pega 7.1.7 provides a learning environment for a single developer. This version of Pega 7 is fully
functional but performance is limited by the speed and memory of your workstation.
Rules and applications you develop with the Personal Edition can be saved and moved to one or more full
Pega 7.1.7 systems or later versions.
What Gets Installed
The Personal Edition installation package includes:
n Java Runtime Environment (JRE) 1.7.0_71
n PostgreSQL 9.1.14
n Apache Tomcat 7.0.56
n Pega 7.1.7 Personal Edition
Personal Edition Installation Guide 2
-
8/9/2019 717 Personal Edition Installation
5/15
-
8/9/2019 717 Personal Edition Installation
6/15
Installing Personal Edition
1. Download the PRPC_PE_win64.zip file from your installation kit.
2. Extract the contents to a directory on your workstation.
This directory name cannot contain spaces.
3. In that directory, double-click install.bat.
The system opens a command window and then launches the installation wizard.
4. When the Personal Edition Installation dialog window displays, click .
5. Carefully review information in the Overview and Prerequisites window to ensure that yourPersonal Edition installs successfully.
Click .
6. On the License Agreement window, review the software license for Personal Edition and its third-
Personal Edition Installation Guide 4
-
8/9/2019 717 Personal Edition Installation
7/15
party products.
Click .
7. The Components to be installed window displays. All of the components necessary for the
install are pre-selected for you.
Optionally, if you do not want to automatically start Pega 7 when the installation completes, clear
the Launch PRPC checkbox.
Click .
8. On the Directories Selection window, browse to the location of the directory where you want to
install the Personal Edition. Otherwise, the installation creates a PRPCPersonalEdition directory
on your C: drive.
Personal Edition Installation Guide 5
-
8/9/2019 717 Personal Edition Installation
8/15
The directory you select must have at least 5 GB of free disk space and must allow a non-
administrative user to create instances in that directory.
Click .
9. The Port Configuration window displays the default port assignment that the Personal Edition
uses for the Database and Tomcat.
Personal Edition Installation Guide 6
-
8/9/2019 717 Personal Edition Installation
9/15
Click to verify that the default ports are available. If there are conflicts, enter a
different port number and run the check again.
Click .
10. Click to launch the install process. Output and Error logs display in the window so you can
monitor the installation process.
Personal Edition Installation Guide 7
-
8/9/2019 717 Personal Edition Installation
10/15
11. When the installation completes and the confirmation message displays, click OK.
Personal Edition Installation Guide 8
-
8/9/2019 717 Personal Edition Installation
11/15
12. Click to close the installation window.
13. If you accepted the default post install process to Launch PRPC, the Pega 7 login screen displayswhen the installation is complete.
Personal Edition Installation Guide 9
-
8/9/2019 717 Personal Edition Installation
12/15
If you did not select the default, see the Using Shortcuts to Start, Log in and Shutdown
Personal Edition section of this document for instructions.
14. Log in to the Pega 7 instance as [email protected] with a password of install to verify
that you can access the Designer Studio.
Personal Edition is now installed and ready for you to configure features and build applications.
Personal Edition Installation Guide 10
-
8/9/2019 717 Personal Edition Installation
13/15
Using Shortcuts to Start, Log in and Shutdown Personal
Edition
As you work with Personal Edition, you can stop and start the Pega 7 instance as you work through your
testing and configuration. This allows you to free up the disk space used by Pega 7 when you are notactively using Personal Edition.
To do this, use the three shortcuts that were added to your desktop during the installation.
n Pega 7.1.7 Start up starts the Pega 7 instance.
n Pega 7.1.7 Login opens the Pega 7 log in screen.
n Pega 7.1.7 Shutdown shuts down the Pega 7 instance.
Starting Personal EditionUse this shortcut to start Personal Edition when it has been shut down or when the Tomcat window is
closed.
1. Click the Start up shortcut to start Pega 7.
2. The start up process is logged in a CMD window.
When the server has started and displays the following message, you can launch the login shortcut
to log into Pega 7.
INFO: Server Startup in ms
3. You can minimize the Tomcat window but it must remain open while you work in Personal
Edition.
Logging into Personal Edition
Use this shortcut to launch the Pega 7 sign-on screen after the server has started.
1. Click the Login shortcut to display the sign-on screen.
2. Enter a User ID and Password.
3. Click Log In.
Shutting down Personal Edition
Use this shortcut to shut down the Personal Edition server after you log out of Personal Edition. This also
closes the Tomcat window.
Personal Edition Installation Guide 11
-
8/9/2019 717 Personal Edition Installation
14/15
n Click the Shutdown shortcut to start the shutdown process.
Personal Edition Installation Guide 12
-
8/9/2019 717 Personal Edition Installation
15/15
Uninstalling Personal Edition
When you are finished with Personal Edition, you can easily remove it from your laptop.
Before you remove Personal Edition, you can package and save your work into a separate file to import
your work into another application.
1. Save your work (recommended).
You can save the work in Personal Edition by using the Application Packaging Wizard to export your
work including work objects and data. Save the export ZIP file to a safe location.
Select Designer Studio > Application > Distribution > Package to start the wizard. For details
about how to use the wizard, see the Pega Discovery Network (PDN) article Migrating Applications
with the Application Packaging Wizard .
2. Backup your database (optional).
3. Close the Tomcat and logging windows.
4. Remove Personal Edition.
a. Delete the PRPCPersonalEdition program directory that was created during the
installation.
b. Delete the three Personal Edition shortcuts on your desktop.
Personal Edition Installation Guide 13