73.wireless endorsed operated robot
TRANSCRIPT
WIRELESS ENDORSED OPERATED ROBOT
AIM:
The aim of this project is to operate a robot with camera by using remote.
PURPOSE:
The purpose of this project is to implement a remote robot using ZIGBEE technology and also to
capture the images by camera which is connected to robot.
BLOCK DIAGRAM:
ROBOT SECTION:
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
1
REMOTE SECTION:
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
2
MOTOR
DRIVER
POWER
SUPPLY
MOTORS
CAMERA
MICRO
CONTROLLER
(LPC2148)
ZIGBEE
MOTOR
MOTOR DRIVER
POWER
SUPPLY
KEYPAD
Zigbee
Micro controller
(2051)
PC SECTION:
DESCRIPTION:
Now a day's every system is automated in order to face new challenges. In the present
days Automated systems have less manual operations, flexibility, reliability and accurate. Due to
this demand every field prefers automated control systems. Especially in the field of electronics
automated systems are giving good performance.
The term webcam is also used to describe the low-resolution digital video cameras
designed for such purposes, but which can also be used to record in a non-real-time fashion.
Probably the most useful thing to know about the Webcams are small cameras, whose images
can be accessed using the World Wide Web, instant messaging, or a PC video conferencing
application. Video conferencing cams typically take the form of a small camera connected
directly to a PC.
In this project “WIRELESS ENDORSED OPERATED ROBOT” is a project which
gives the scope of monitoring the Industry with webcam. In this present project we are trying to
control the directions of the ROBOT and at the same time we are trying to monitor the Industry
with the help of ROBOT webcam with a new wireless technology “ZIGBEE”.
Every system is automated in order to face new challenges in the present day situation.
Automated systems have less manual operations, so that the flexibility, reliabilities are high and
accurate. Hence every field prefers automated control systems. Especially in the field of
electronics automated systems are doing better performance. Any automated system will work
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
3
CAMERA RECEIVER PC
effectively if it access wirelessly. Here in this project we are going to use ZIGBEE
communication for remote accessing of automated system. Probably the most useful thing to
know about the ZIGBEE communication is that it is an international standard communication.
ZIGBEE communication works by creating electromagnetic waves at a source and
being able to pick up those electromagnetic waves at a particular destination. These
electromagnetic waves travel through the air at near the speed of light. The wavelength of an
electromagnetic signal is inversely proportional to the frequency; the higher the frequency, the
shorter the wavelength.
HARDWARE USED:
Micro-controller(2051&ARM)
Power supply
Camera
Motor Driver
Motors
ZIGBEE remote
SOFTWARE USED:
Keil µvision
Express PCB
Express SCH
Embedded-C
RESULT:
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
4
According to this project we can implement a robot having camera can be operated by
using remote.
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
5