76… · square), triangular or polygonal cross-section may have corners rounded along their whole...

Chapter 76Aluminium and articles thereof

Chapter notes

1. In this chapter, the following expressions havethe meanings hereby assigned to them:

(a) Bars and rods:Rolled, extruded, drawn or forged products,not in coils, which have a uniform solid cross-section along their whole length in the shapeof circles, ovals, rectangles (includingsquares), equilateral triangles or regularconvex polygons (including 'flattened circles'and 'modified rectangles', of which twoopposite sides are convex arcs, the other twosides being straight, of equal length andparallel). Products with a rectangular(including square), triangular or polygonalcross-section may have corners roundedalong their whole length. The thickness ofsuch products which have a rectangular(including 'modified rectangular') cross-section exceeds one-tenth of the width. Theexpression also covers cast or sinteredproducts, of the same forms and dimensions,which have been subsequently worked afterproduction (otherwise than by simpletrimming or de-scaling), provided that theyhave not thereby assumed the character ofarticles or products of other headings.

(b) Profiles:Rolled, extruded, drawn, forged or formedproducts, coiled or not, of a uniform cross-section along their whole length, which donot conform to any of the definitions of bars,rods, wire, plates, sheets, strip, foil, tubes orpipes. The expression also covers cast orsintered products, of the same forms, whichhave been subsequently worked afterproduction (otherwise than by simpletrimming or de-scaling), provided that theyhave not thereby assumed the character ofarticles or products of other headings.

(c) Wire:Rolled, extruded or drawn products, in coils,which have a uniform solid cross-sectionalong their whole length in the shape of

circles, ovals, rectangles (including squares),equilateral triangles or regular convexpolygons (including 'flattened circles' and'modified rectangles', of which two oppositesides are convex arcs, the other two sidesbeing straight, of equal length and parallel).Products with a rectangular (includingsquare), triangular or polygonal cross-sectionmay have corners rounded along their wholelength. The thickness of such products whichhave a rectangular (including 'modifiedrectangular') cross-section exceeds one-tenthof the width.

(d) Plates, sheets, strip and foil:Flat-surfaced products (other than theunwrought products of heading 7601), coiledor not, of solid rectangular (other thansquare) cross-section with or withoutrounded corners (including 'modifiedrectangles' of which two opposite sides areconvex arcs, the other two sides beingstraight, of equal length and parallel) of auniform thickness, which are:

- of rectangular (including square) shapewith a thickness not exceeding one-tenthof the width,

- of a shape other than rectangular orsquare, of any size provided that they donot assume the character of articles orproducts of other headings.Headings 7606 and 7607 apply inter alia toplates, sheets, strip and foil with patterns(for example, grooves, ribs, chequers,tears, buttons, lozenges) and to suchproducts which have been perforated,corrugated, polished or coated, providedthat they do not thereby assume thecharacter of articles or products of otherheadings.

(e) Tubes and pipes:Hollow products, coiled or not, which have auniform cross-section with only one enclosedvoid along their whole length in the shape ofcircles, ovals, rectangles (including squares),equilateral triangles or regular convex polygons,and which have a uniform wall thickness.Products with a rectangular (including square),equilateral triangular or regular convex

polygonal cross-section, which may have cornersrounded along their whole length, are also to beconsidered as tubes and pipes provided theinner and outer cross-sections are concentricand have the same form and orientation. Tubesand pipes of the foregoing cross-sections may bepolished, coated, bent, threaded, drilled,waisted, expanded, cone-shaped or fitted withflanges, collars or rings.

Subheading notes

1. In this chapter, the following expressions have themeanings hereby assigned to them:

(a) Aluminium, not alloyed:

Other elements

Element Limiting content % by weight

Fe + Si (iron plus silicon) 1

Other elements, each 0.1

(b) Aluminium alloys:Metallic substances in which aluminiumpredominates by weight over each of the otherelements, provided that:(1) the content by weight of at least one of theother elements or of iron plus silicon takentogether is greater than the limit specified in theforegoing table, or(2) the total content by weight of such otherelements exceeds 1%.

2. Notwithstanding the provisions of chapter note 1(c),for the purposes of subheading 7616 91 the term 'wire'applies only to products, whether or not in coils, of anycross-sectional shape, of which no cross-sectionaldimension exceeds 6 mm.## Additional chapter notes ##

1. For the purposes of subheading 7601 20 20, thefollowing terms shall have the meanings hereby assignedto them:

- ‘slabs’: unwrought products which have auniform solid cross-section along their wholelength in the shape of a rectangle or otherpolygon, of a width exceeding 800 mm, of athickness exceeding 280 mm and of a lengthalways superior to the width and to thethickness. These products are intended for beingrolled;

- ‘billets’: unwrought products which have auniform solid cross-section along their wholelength in the shape of a circle (including a‘flattened circle’), of a diameter exceeding 125

18 March 2021 76 1Customs Tariff Vol 2 Sect XV 76 01-76 16

mm. These products are intended for beingextruded.

2. For the purposes of subheadings 7606 12 11 and 7606 1219, the following terms shall have the meaning herebyassigned to them:

- ‘beverage can body stock’: sheets or strips incoils, rolled, having manganese as thepredominant alloy element and having aminimum tensile strength of 262 MPa. Thesheets or strips have a uniform solid cross-section along their whole length, are of a widthof 300 mm or more but not more than 2000 mm,of a thickness exceeding 0.2 mm but notexceeding 0.4 mm, and of a length alwayssuperior to the width and to the thickness.Beverage can body stock is prelubricated, with abright surface;

- ‘beverage can end stock and tab stock’: sheetsor strips in coils, having magnesium as thepredominant alloy element and having aminimum tensile strength of 345 MPa. Thesheets or strips have a uniform solid cross-section along their whole length, are of a widthof 30 mm or more but not more than 2000 mm,of a thickness exceeding 0.2 mm but notexceeding 0.35 mm, and of a length alwayssuperior to the width and to the thickness.Beverage can end stock is varnished on bothsides. Beverage can tab stock is degreased andoiled.These products are to be used for the fabricationof rigid beverage cans, including ends (lids) andtabs.


1 2A 2B 3 4 5 6 7

76 01UNWROUGHT ALUMINIUM

Aluminium, not alloyed 760110 00 00 S Kg 2 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-1 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – LeastDeveloped Countries-0 %, IL-0 %, IS-0 %, JP-0 %, KE-0 %,KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %, MK-0 %, MX-0 %,NO-0 %, OCTs (Overseas Countries and Territories)-0 %,PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0 %, SM-0 %,TN-0 %, TR-0 %, UA-0 %, UK-Canada agreement: re-imported goods-0 %[], VN-0 %, WS-0 %, XC-0 %, XK-0 %,XL-0 %

Aluminium alloys [1,2,3,6,7,8]

- Slabs and billets [1,2,3,6,7,8]

- - Slabs and billets of aluminium alloy containing lithium 760120 20 10 S Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-1 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – LeastDeveloped Countries-0 %, IL-0 %, IS-0 %, JP-0 %, KE-0 %,KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %, MK-0 %, MX-0 %,NO-0 %, OCTs (Overseas Countries and Territories)-0 %,PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0 %, SM-0 %,TN-0 %, TR-0 %, UA-0 %, UK-Canada agreement: re-imported goods-0 %[4], VN-3 %, WS-0 %, XC-0 %, XK-0 %,XL-0 %

- - Other 760120 20 90 S Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-1 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – LeastDeveloped Countries-0 %, IL-0 %, IS-0 %, JP-0 %, KE-0 %,KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %, MK-0 %, MX-0 %,NO-0 %, OCTs (Overseas Countries and Territories)-0 %,PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0 %, SM-0 %,TN-0 %, TR-0 %, UA-0 %, UK-Canada agreement: re-imported goods-0 %[4], VN-3 %, WS-0 %, XC-0 %, XK-0 %,XL-0 %

- Other 760120 80 00 S Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-1 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – LeastDeveloped Countries-0 %, IL-0 %, IS-0 %, JP-0 %, KE-0 %,KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %, MK-0 %, MX-0 %,NO-0 %, OCTs (Overseas Countries and Territories)-0 %,PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0 %, SM-0 %,TN-0 %, TR-0 %, UA-0 %, UK-Canada agreement: re-imported goods-0 %[4], VN-3 %, WS-0 %, XC-0 %, XK-0 %,XL-0 %

76 02


1 2A 2B 3 4 5 6 7

ALUMINIUM WASTE AND SCRAP

Waste

- Turnings, shavings, chips, milling waste, sawdust and filings;waste of coloured, coated or bonded sheets and foil, of athickness (excluding any backing) not exceeding 0,2 mm

760200 11 00 Kg Free AD-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %, CM-0 %,EG-0 %, Eastern and Southern Africa States-0 %,European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP– Enhanced Framework-0 %, GSP – General Framework(Excluding IN)-0 %, GSP – Least Developed Countries-0 %,IL-0 %, IS-0 %, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0%, MD-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countriesand Territories)-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0%, SM-0 %, TN-0 %, TR-0 %, WS-0 %, XC-0 %, XL-0 %

- Other (including factory rejects) 760200 19 00 Kg Free AD-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %, CM-0 %,EG-0 %, Eastern and Southern Africa States-0 %,European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP– Enhanced Framework-0 %, GSP – General Framework(Excluding IN)-0 %, GSP – Least Developed Countries-0 %,IL-0 %, IS-0 %, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0%, MD-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countriesand Territories)-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0%, SM-0 %, TN-0 %, TR-0 %, WS-0 %, XC-0 %, XL-0 %

Scrap 760200 90 00 Kg Free AD-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %, CM-0 %,EG-0 %, Eastern and Southern Africa States-0 %,European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP– Enhanced Framework-0 %, GSP – General Framework(Excluding IN)-0 %, GSP – Least Developed Countries-0 %,IL-0 %, IS-0 %, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0%, MD-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countriesand Territories)-0 %, PG-0 %, PS-0 %, SADC EPA-0 %, SG-0%, SM-0 %, TN-0 %, TR-0 %, WS-0 %, XC-0 %, XL-0 %

76 03ALUMINIUM POWDERS AND FLAKES

Powders of non-lamellar structure 760310 00 00 STQ

Kg Free AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-0 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0 %,JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %


1 2A 2B 3 4 5 6 7

Powders of lamellar structure; flakes 760320 00 00 STQ


76 04ALUMINIUM BARS, RODS AND PROFILES

Of aluminium, not alloyed

- Bars and rods

- - Unassembled, containing not more than 99.3% of aluminium 760410 10 11 STQ

Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - Other 760410 10 90 STQ


- Profiles [1,2,3,6,7,8,20,21,22]

- - Bearing a specific manufacture number, for use in certain

types of aircraft [1,2,3,6,7,8,20,21,22]


1 2A 2B 3 4 5 6 7

- - - Unassembled, containing not more than 99.3% of aluminium 760410 90 11 STQ


- - - Other 760410 90 19 STQ


- - Conical shapes for reinforcing lateral rudders, for use in

certain types of aircraft [1,2,3,6,7,8,20]



- - - Other 760410 90 29 STQ


- - Other [1,2,3,6,7,8,20]


1 2A 2B 3 4 5 6 7



- - - Other 760410 90 89 STQ


Of aluminium alloys [1,2,3,6,7,8,20,21,22]

- Hollow profiles [1,2,3,6,7,8,20,21,22]

- - Hollow profile with:-one closed chamber of aluminum alloy 6063-T5 or 6060-T5,-a wall thickness of not more than 0,7 mm, and-an anodized layer of 10 µm at the surface,for use in the manufacture of board frames of whiteboards,cork boards, easel boards, education boards and display cases

760421 00 10 STQ


- - Other 760421 00 90 STQ


- Other [1,2,3,6,7,8,20,21,22]


1 2A 2B 3 4 5 6 7

- - Bars and rods [1,2,3,6,7,8,20,21,22]

- - - Bars of aluminium-lithium alloys 760429 10 10 STQ

Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-1.8 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - - Aluminium alloy rods with a diameter of 300,1 mm or more,but not more than 533,4 mm

760429 10 30 STQ


- - - Bars and rods of aluminium alloys containing by weight :- 0,25 % or more but not more than 7 % of zinc, and- 1 % or more but not more than 3 % of magnesium, and- 1 % or more but not more than 5 % of copper, and- not more than 1 % of manganeseconsistent with the material specifications AMS QQ-A-225, of akind used in aerospace industry (inter alia conformingNADCAP and AS9100) and obtained by rolling mill process

760429 10 40 STQ


- - - Other 760429 10 90 STQ


- - Profiles [1,2,3,6,7,8,10,20,21,22]


1 2A 2B 3 4 5 6 7

- - - Bearing a specific manufacture number, for use in certaintypes of aircraft

760429 90 10 STQ

Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-3.8 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0%, MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countriesand Territories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0%, SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - - Conical shapes for reinforcing lateral rudders, for use incertain types of aircraft

760429 90 20 STQ


- - - Other 760429 90 90 STQ


76 05ALUMINIUM WIRE


- Of which the maximum cross-sectional dimension exceeds 7 mm 760511 00 00 STQ



1 2A 2B 3 4 5 6 7

- Other [1,2,3,6,7,8,21,22]

- - Not alloyed aluminium wire, of a diameter of 2 mm or morebut not more than 6 mm, covered with a layer of copper of athickness of 0,032 mm or more but not more than 0,117 mm

760519 00 10 STQ


- - Other 760519 00 90 STQ


Of aluminium alloys [1,2,3,6,7,8,21,22]

- Of which the maximum cross-sectional dimension exceeds 7 mm 760521 00 00 STQ


- Other [1,2,3,6,7,8,21,22]

- - Wire of aluminium alloys containing by weight:- 0,10 % or more but not more than 5 % of copper, and- 0,2 % or more but not more than 6 % of magnesium, and- 0,10 % or more but not more than 7 % of zinc, and- not more than 1 % of manganeseconsistent with the material specifications AMS QQ-A-430, of akind used in aerospace industry (inter aliaconforming NADCAP and AS9100) and obtained by rolling millprocess

760529 00 10 STQ

1. Kg2. m

Free AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-0 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0 %,JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %


1 2A 2B 3 4 5 6 7

- - Other 760529 00 90 STQ


76 06ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESSEXCEEDING 0,2 MM

Rectangular (including square)

- Of aluminium, not alloyed

- - Painted, varnished or coated with plastics

- - - Plates bearing a specific manufacture number, for use incertain types of aircraft

- - - - Not backed, without internal layers of other material 760611 10 25 STQ


- - - - Other 760611 10 30 STQ


- - - Other [1,2,3,6,7,8,20,23,24]


1 2A 2B 3 4 5 6 7

- - - - Not backed, without internal layers of other material 760611 10 86 STQ


- - - - Other 760611 10 89 STQ


- - Other, of a thickness of [1,2,3,6,7,8,20,21,22]

- - - Less than 3 mm [1,2,3,6,7,8,20,21,22]

- - - - Plates bearing a specific manufacture number, for use in

certain types of aircraft [1,2,3,6,7,8,20,21,22]

- - - - - Not backed, without internal layers of other material 760611 91 25 STQ



1 2A 2B 3 4 5 6 7

- - - - - Other 760611 91 30 STQ


- - - - Other [1,2,3,6,7,8,20,23,24]



- - - - - Other 760611 91 89 STQ


- - - Not less than 3 mm but less than 6 mm [1,2,3,6,7,8,20,21,22]




1 2A 2B 3 4 5 6 7



- - - - - Other 760611 93 30 STQ


- - - - Other [1,2,3,6,7,8,20,23,24]



- - - - - Other 760611 93 89 STQ


- - - Not less than 6 mm [1,2,3,6,7,8,20,21,22]


1 2A 2B 3 4 5 6 7





- - - - - Other 760611 99 30 STQ


- - - - Other [1,2,3,6,7,8,20,23,24]



- - - - - Other 760611 99 89 STQ



1 2A 2B 3 4 5 6 7

- Of aluminium alloys [1,2,3,6,7,8,20,21,22]

- - Beverage can body stock, end stock and tab stock[1,2,3,6,7,8,20,21,22]

- - - Beverage can body stock 760612 11 00 STQ


- - - Beverage can end stock and tab stock 760612 19 00 STQ


- - Other [1,2,3,6,7,8,20]

- - - Painted, varnished or coated with plastics [1,2,3,6,7,8,20]



- - - - - Not backed, without internal layers of other material[1,2,3,6,7,8,20]

- - - - - - Of a thickness of not less than 0,8 mm 760612 20 23 STQ



1 2A 2B 3 4 5 6 7

- - - - - - Other 760612 20 25 STQ


- - - - - Other 760612 20 30 STQ


- - - - Other [1,2,3,6,7,8,20]

- - - - - Not backed, without internal layers of other material[1,2,3,6,7,8,20]

- - - - - - For use as body panels in the car industry and of athickness of not more than 6 mm or for use in themanufacture of aircraft parts and of a thickness of notless than 0,8 mm

760612 20 85 STQ


- - - - - - Other 760612 20 86 STQ



1 2A 2B 3 4 5 6 7

- - - - - Other 760612 20 89 STQ


- - - Other, of a thickness of [1,2,3,6,7,8,20]

- - - - Less than 3 mm [1,2,3,6,7,8,20]

- - - - - Plates bearing a specific manufacture number, for use

in certain types of aircraft [1,2,3,6,7,8,20]

- - - - - - Not backed, without internal layers of other material[1,2,3,6,7,8,20]

- - - - - - - Of a thickness of not less than 0,8 mm 760612 92 23 STQ


- - - - - - - Other 760612 92 25 STQ



1 2A 2B 3 4 5 6 7

- - - - - - Other 760612 92 30 STQ


- - - - - Other [1,2,3,6,7,8,20,23,24]

- - - - - - Not backed, without internal layers of other material[1,2,3,6,7,8,20,23,24]

- - - - - - - For use as body panels in the car industry or for use inthe manufacture of aircraft parts and of a thickness ofnot less than 0,8 mm

760612 92 91 STQ


- - - - - - - Other 760612 92 95 STQ


- - - - - - Other 760612 92 97 STQ



1 2A 2B 3 4 5 6 7

- - - - Not less than 3 mm but less than 6 mm [1,2,3,6,7,8,20]

- - - - - Plates bearing a specific manufacture number, for use incertain types of aircraft

760612 93 10 STQ


- - - - - Other [1,2,3,6,7,8,20]


- - - - - - - For use as body panels in the car industry or for use inthe manufacture of aircraft parts

760612 93 85 STQ


- - - - - - - Other 760612 93 86 STQ



1 2A 2B 3 4 5 6 7

- - - - - - Other 760612 93 88 STQ


- - - - Not less than 6 mm [1,2,3,6,7,8,20]

- - - - - Plates bearing a specific manufacture number, for use incertain types of aircraft

760612 99 10 STQ


- - - - - Sheets of aluminium-lithium alloys [1,2,3,6,7,8,20]


- - - - - - - For use as body panels in the car industry and with athickness of 6 mm or for use in the manufacture ofaircraft parts

760612 99 21 STQ



1 2A 2B 3 4 5 6 7

- - - - - - - Other 760612 99 25 STQ


- - - - - - Other 760612 99 30 STQ


- - - - - Other [1,2,3,6,7,8,20]


- - - - - - - For use as body panels in the car industry and with athickness of 6 mm or for use in the manufacture ofaircraft parts

760612 99 85 STQ


- - - - - - - Other 760612 99 86 STQ



1 2A 2B 3 4 5 6 7

- - - - - - Other 760612 99 88 STQ


Other [1,2,3,6,7,8,20]

- Of aluminium, not alloyed [1,2,3,6,7,8,20]

- - Plates bearing a specific manufacture number, for use in


- - - Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in theform of circles; of a thickness exceeding 0,2 mm but notexceeding 6 mm;- in plates, of a thickness exceeding 6 mm

760691 00 25 STQ


- - - Other 760691 00 30 STQ


- - Other [1,2,3,6,7,8,20,23,24]


1 2A 2B 3 4 5 6 7

- - - Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in theform of circles; of a thickness exceeding 0,2 mm but notexceeding 6 mm;- in plates, of a thickness exceeding 6 mm

760691 00 86 STQ


- - - Other 760691 00 88 STQ


- Of aluminium alloys [1,2,3,6,7,8,20,21,22]

- - Plates bearing a specific manufacture number, for use in


- - - Not backed, without internal layers of other material,

- in coils or in coiled strips, in cut-to-length sheets, or in

the form of circles; of a thickness exceeding 0,2 mm but

not exceeding 6 mm;

- in plates, of a thickness exceeding 6 mm[1,2,3,6,7,8,20,21,22]

- - - - Of a thickness of not less than 0,8 mm, for use in themanufacture of aircraft parts

760692 00 23 STQ



1 2A 2B 3 4 5 6 7

- - - - Other 760692 00 25 STQ


- - - Other 760692 00 30 STQ


- - Other [1,2,3,6,7,8,10,20,23,24]

- - - Not backed, without internal layers of other material,

- in coils or in coiled strips, in cut-to-length sheets, or in

the form of circles; of a thickness exceeding 0,2 mm but

not exceeding 6 mm;

- in plates, of a thickness exceeding 6 mm[1,2,3,6,7,8,10,20,23,24]

- - - - For use as body panels in the car industry and of a thicknessof not more than 6 mm or for use in the manufacture ofaircraft parts and of a thickness of not less than 0,8 mm

760692 00 85 STQ



1 2A 2B 3 4 5 6 7

- - - - Other 760692 00 86 STQ


- - - Other 760692 00 88 STQ


76 07ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKEDWITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKINGMATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING)NOT EXCEEDING 0,2 MM

Not backed

- Rolled but not further worked

- - Of a thickness of less than 0,021 mm

- - - In rolls of a weight not exceeding 10 kg

- - - - Of a thickness of 0,007 mm or more but less than0,021 mm

- - - - - Consigned from Thailand 760711 11 11 STQ

Kg 7.5 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-4 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %


1 2A 2B 3 4 5 6 7

- - - - - Other 760711 11 19 STQ


- - - - Other 760711 11 90 STQ


- - - Other [2,3,6,7,8,21,22]

- - - - For household use, of a thickness of not less than 0,008 mmand not more than 0,018 mm, in rolls of a width notexceeding 650 mm

760711 19 10 STQ


- - - - For household use, of a thickness of not less than 0,007 mmand less than 0,008 mm, whether or not annealed

760711 19 30 STQ



1 2A 2B 3 4 5 6 7

- - - - For household use, of a thickness of not less than 0,008 mmand not more than 0,018 mm, in rolls of a width exceeding650 mm, whether or not annealed

760711 19 40 STQ


- - - - For household use, of a thickness of more than 0,018 mmand less than 0,021 mm, whether or not annealed

760711 19 50 STQ


- - - - For other uses than household aluminium foil,- Of a thickness of not less than 0,007 mm and less than0,008 mm, whether or not annealed, or,- Of a thickness of not less than 0,008 mm and not morethan 0,018 mm, in rolls of a width exceeding 650 mm,whether or not annealed, or,- Of a thickness of more than 0,018 mm and less than0,021 mm, whether or not annealed

760711 19 60 STQ


- - - - Other [2,3,6,7,8,21,22]

- - - - - Aluminium converter foil 760711 19 91 STQ



1 2A 2B 3 4 5 6 7

- - - - - Household aluminium foil 760711 19 94 STQ


- - - - - Other 760711 19 96 STQ


- - Of a thickness of not less than 0,021 mm but not more than

0,2 mm [2,3,6,7,8,21,22]

- - - Aluminium foil in rolls:

- having a purity of 99,99 % by weight,

- of a thickness of 0,021 mm or more but not more than

0,2 mm,

- with a width of 500 mm,

- with a surface oxide layer by 3 to 4 nm thick,

- and with a cubic texture of more than 95 % [2,3,6,7,8,21,22]

- - - - Of a thickness of not less than 0,021 mm and not more

than 0,045 mm, in rolls of a weight exceeding 10 kg,

whether or not annealed, when presented with at least

two layers [2,3,6,7,8,21,22]


1 2A 2B 3 4 5 6 7

- - - - - Of a thickness of not less than 0,03 mm, without internallayers of other material

760711 90 44 STQ


- - - - - Other 760711 90 46 STQ





two layers, for other uses than aluminium household foil[2,3,6,7,8]


760711 90 48 STQ



1 2A 2B 3 4 5 6 7

- - - - - Other 760711 90 49 STQ


- - - - Other [2,3,6,7,8,9]

- - - - - Of a thickness of not less than 0,03 mm but less than 0.2mm, without internal layers of other material, in coils or incoiled strips

760711 90 51 STQ


- - - - - Of a thickness of 0.2 mm, in coils or in coiled strips, in

cut-to-length sheets, or in the form of circles [2,3,6,7,8,9]

- - - - - - Without internal layers of other material [2,3,6,7,8,9]

- - - - - - - Alloyed, for use as body panels in the car industry 760711 90 52 STQ



1 2A 2B 3 4 5 6 7

- - - - - - - Other 760711 90 53 STQ


- - - - - - Other 760711 90 54 STQ


- - - - - Other 760711 90 56 STQ


- - - Plain aluminium foil with the following parameters:

- an aluminium content of 99,98 % or more

- a thickness of 0,070 mm or more but not more than

0,125 mm

- with a cubic texture of a kind used for high voltage

etching [2,3,6,7,8,9]


1 2A 2B 3 4 5 6 7

- - - - Without internal layers of other material, in coils or in coiledstrips

760711 90 65 STQ


- - - - Other 760711 90 67 STQ


- - - Other [2,3,6,7,8]




two layers [2,3,6,7,8]


760711 90 71 STQ



1 2A 2B 3 4 5 6 7

- - - - - Other 760711 90 72 STQ





two layers, for other uses than aluminium household foil[2,3,6,7,8]


760711 90 73 STQ


- - - - - Other 760711 90 74 STQ



1 2A 2B 3 4 5 6 7

- - - - Aluminium and magnesium alloy strip or foil:

- of an alloy conforming to standards 5182-H19 or 5052-

H19,

- in rolls with an outside diameter of minimum 1 250 mm

but not more than 1 350 mm,

- of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16

mm, 0,18 mm or 0,20 mm,

- of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm,

16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

- having a camber tolerance of not more than 0,4

mm/750 mm,

- of a flatness measurement: I-unit ±4,

- having a tensile strength of more than (5182-H19) 365

MPa or (5052-H19) 320 MPa,

- of an elongation A50 of more than (5182-H19) 3 % or

(5052-H19) 2,5 %

for use in the manufacture of slats for blinds[2,3,6,7,8]


760711 90 75 STQ


- - - - - Of a thickness of 0.2 mm [2,3,6,7,8,9,23]

- - - - - - Without internal layers of other material [2,3,6,7,8,9,23]

- - - - - - - For use as body panels in the car industry 760711 90 76 STQ



1 2A 2B 3 4 5 6 7

- - - - - - - Other 760711 90 77 STQ


- - - - - - Other 760711 90 78 STQ


- - - - - Other 760711 90 79 STQ


- - - - Other [2,3,6,7,8]


760711 90 91 STQ


- - - - - Of a thickness of 0.2 mm, in coils or in coiled strips, in

cut-to-length sheets, or in the form of circles [2,3,6,7,8]


1 2A 2B 3 4 5 6 7

- - - - - - Without internal layers of other material [2,3,6,7,8]

- - - - - - - Alloyed, for use as body panels in the car industry 760711 90 92 STQ


- - - - - - - Other 760711 90 93 STQ


- - - - - - Other 760711 90 94 STQ


- - - - - Other 760711 90 96 STQ


- Other [2,3,6,7,8]

- - Of a thickness of less than 0,021 mm [2,3,6,7,8]


1 2A 2B 3 4 5 6 7

- - - Of a thickness of 0,007 mm or more but less than 0,021

mm, in rolls of a weight not exceeding 10 kg, not further

worked than rolled, embossed [2,3,6,7,8]

- - - - Consigned from Thailand 760719 10 11 STQ


- - - - Other 760719 10 19 STQ


- - - Other 760719 10 90 STQ


- - Of a thickness of not less than 0,021 mm but not more than

0,2 mm [2,3,6,7,8,21,22]


1 2A 2B 3 4 5 6 7

- - - Sheet in the form of a roll consisting of a laminate of lithiumand manganese bonded to aluminium, with:- a width of 595 mm or more but not more than 605 mm, and- a diameter of 690 mm or more but not more than 710 mm,for use in the manufacture of cathodes for lithium-ion electricrechargeable batteries

760719 90 10 STQ


- - - Other [2,3,6,7,8,9]

- - - - Of a thickness of not less than 0,03 mm but less than0.2 mm, without internal layers of other material, in coils orin coiled strips

760719 90 75 STQ


- - - - Of a thickness of 0.2 mm, in coils or in coiled strips, in

cut-to-length sheets, or in the form of circles[2,3,6,7,8,21,22]

- - - - - Without internal layers of other material [2,3,6,7,8,21,22]

- - - - - - Alloyed, for use as body panels in the car industry 760719 90 84 STQ



1 2A 2B 3 4 5 6 7

- - - - - - Other 760719 90 86 STQ


- - - - - Other 760719 90 88 STQ


- - - - Other 760719 90 92 STQ


Backed [2,3,6,7,8,21,22]

- Of a thickness (excluding any backing) of less than 0,021 mm 760720 10 00 STQ

Kg 10 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-6.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-2.5 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-6.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- Of a thickness (excluding any backing) of not less than

0,021 mm but not more than 0,2 mm [2,3,6,7,8,21,22]


1 2A 2B 3 4 5 6 7

- - Aluminium foil, in rolls:- coated on one side with polypropylene or polypropylene andacid-modified polypropylene and on the other with polyamideand polyethylene terephthalate, with adhesive layers betweenthem,- with a width of 200 mm or more, but not more than 400 mm,- with a thickness of 0,138 mm or more, but not more than0,168 mm,for use in the manufacture of lithium-ion battery cell covers

760720 90 10 STQ


- - Other 760720 90 90 STQ


76 08ALUMINIUM TUBES AND PIPES


- With attached fittings, suitable for conducting gases orliquids, for use in civil aircraft

- - Unassembled, not welded, containing not more than 99.3% ofaluminium

760810 00 11 STQ

Kg AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-0 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0 %,JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-4 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %


1 2A 2B 3 4 5 6 7

- - Other 760810 00 19 STQ


- Tubes and pipes, ready for fitting, usable as hydraulic conduitsor as conduits for fuel-oil or lubricants for use in certain types ofaircraft

760810 00 20 STQ


- Other [1,2,3,6,7,8,20]

- - Unassembled, not welded, containing not more than 99.3% ofaluminium

760810 00 80 STQ


- - Other 760810 00 89 STQ


Of aluminium alloys [1,2,3,6,7,8,20,21,22]

- Welded [1,2,3,6,7,8,20,21,22]


1 2A 2B 3 4 5 6 7

- - With attached fittings, suitable for conducting gases or liquids,for use in civil aircraft

760820 20 10 STQ


- - Tubes and pipes, ready for fitting, usable as hydraulic conduitsor as conduits for fuel-oil or lubricants for use in certain typesof aircraft

760820 20 20 STQ


- - Other 760820 20 90 STQ


- Other [1,2,3,6,7,8,20,21,22]

- - Not further worked than extruded [1,2,3,6,7,8,20,21,22]

- - - With attached fittings, suitable for conducting gases orliquids, for use in civil aircraft

760820 81 10 STQ



1 2A 2B 3 4 5 6 7

- - - Seamless aluminium alloyed extruded tubes (Aluminum6061F according to standard ASTM B241) with:-an outer diameter of 320 mm or more but not more than400 mm, and-a wall thickness of 8 mm or more but not more than 10 mm,for use in the manufacture of high pressure vessels

760820 81 20 STQ


- - - Other 760820 81 90 STQ


- - Other [1,2,3,6,7,8,10,20,21,22]

- - - With attached fittings, suitable for conducting gases orliquids, for use in civil aircraft

760820 89 10 STQ


- - - Tubes and pipes, ready for fitting, usable as hydraulicconduits or as conduits for fuel-oil or lubricants for use incertain types of aircraft

760820 89 20 STQ



1 2A 2B 3 4 5 6 7

- - - Seamless aluminium alloyed extruded tubes with:- an outer diameter of 60 mm or more but not more than420 mm, and- a wall thickness of 10 mm or more but not more than80 mm

760820 89 30 STQ


- - - Seamless flow forming aluminium alloyed tubes (Aluminum6061A according to standard ISO 7866) with:-an outer diameter of 378 mm or more but not more than385 mm, and-a wall thickness of 4 mm or more but not more than 7 mmfor use in the manufacture of high pressure vessels

760820 89 40 STQ


- - - Other 760820 89 90 STQ


76 09ALUMINIUM TUBE OR PIPE FITTINGS (FOR EXAMPLE,COUPLINGS, ELBOWS, SLEEVES)

For use in certain types of aircraft 760900 00 10 STQ

Kg 4 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-0 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0 %,JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %


1 2A 2B 3 4 5 6 7

Other 760900 00 90 STQ

Kg 4 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-0 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0 %,JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

76 10ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATEDBUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES(FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS,LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORSAND WINDOWS AND THEIR FRAMES AND THRESHOLDS FORDOORS, BALUSTRADES, PILLARS AND COLUMNS);ALUMINIUM PLATES, RODS, PROFILES, TUBES AND THE LIKE,PREPARED FOR USE IN STRUCTURES

Doors, windows and their frames and thresholds for doors 761010 00 00 STQ

1. Kg2. p/st

6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

Other [2,3,6,7,8,21,22,27]

- Bridges and bridge-sections, towers and lattice masts 761090 10 00 STQ

Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-3.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- Other [2,3,6,7,8,21,22]


1 2A 2B 3 4 5 6 7

- - Bars, rods, profiles (whether or not hollow), tubes, pipes,unassembled, not welded, made from aluminium, whether ornot alloyed, containing not more than 99.3% of aluminium

761090 90 10 STQ


- - Other 761090 90 90 STQ


76 11ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILARCONTAINERS, FOR ANY MATERIAL (OTHER THANCOMPRESSED OR LIQUEFIED GAS), OF A CAPACITYEXCEEDING 300 LITRES, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL ORTHERMAL EQUIPMENT

761100 00 00 STQ


76 12ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILARCONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULARCONTAINERS), FOR ANY MATERIAL (OTHER THANCOMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOTEXCEEDING 300 LITRES, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL ORTHERMAL EQUIPMENT


1 2A 2B 3 4 5 6 7

Collapsible tubular containers 761210 00 00 STQ


Other [2,3,6,7,8,10,11,18,19,21,22]

- Containers of a kind used for aerosols 761290 20 00 STQ

1. Kg2. p/st


- Manufactured from foil of a thickness not exceeding 0,2 mm 761290 30 00 STQ


- Other 761290 80 00 STQ


76 13ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIEDGAS


1 2A 2B 3 4 5 6 7

Bottles for inflating escape chutes, intended for use incertain types of aircraft

761300 00 10 STQ

Kg Free AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

Aluminium container, seamless, for compressed naturalgas or compressed hydrogen, wholly embedded in anoverwrap of epoxy-carbon fibres composite, of a storagecapacity of 172 l (± 10 %) and an unfilled weight of not morethan 64 kg

761300 00 20 STQ

1. Kg2. p/st

Free AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

Other 761300 00 90 STQ

Kg Free AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

76 14STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OFALUMINIUM, NOT ELECTRICALLY INSULATED

With steel core 761410 00 00 STQ



1 2A 2B 3 4 5 6 7

Other 761490 00 00 STQ


76 15TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES ANDPARTS THEREOF, OF ALUMINIUM; POT SCOURERS ANDSCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OFALUMINIUM; SANITARY WARE AND PARTS THEREOF, OFALUMINIUM

Table, kitchen or other household articles and partsthereof; pot scourers and scouring or polishing pads, glovesand the like

- Cast

- - Aluminium radiators and elements or sections of which suchradiator is composed, whether or not such elements areassembled in blocks

761510 10 10 TQ Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - Other 761510 10 90 TQ Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %


1 2A 2B 3 4 5 6 7

- Manufactured from foil of a thickness not exceeding 0,2 mm 761510 30 00 TQ Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- Other [2,3,6,7,8,21,22]

- - Aluminium radiators and elements or sections of which suchradiator is composed, whether or not such elements areassembled in blocks

761510 80 10 TQ Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - Other 761510 80 90 TQ Kg 6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-0 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-2.5 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

Sanitary ware and parts thereof 761520 00 00 STQ


76 16OTHER ARTICLES OF ALUMINIUM


1 2A 2B 3 4 5 6 7

Nails, tacks, staples (other than those of heading 8305),screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins,washers and similar articles

- Self-locking bolts and nuts (of the type "Hi-lok") 761610 00 10 STQ


- Staples, whether or not in strips or in coils, hog rings, whether ornot in strips, brad nails in strips, and pins in strips; of steel wire,whether or not coated, of aluminum alloy wire, or of stainlesssteel wire; designed for joining or holding together materials orobjects

761610 00 40 STQ


- Other [2,3,6,7,8]

- - For use in certain types of aircraft 761610 00 91 STQ


- - Other 761610 00 99 STQ



1 2A 2B 3 4 5 6 7

Other [2,3,6,7,8]

- Cloth, grill, netting and fencing, of aluminium wire 761691 00 00 STQ


- Other [2,3,6,7,8,21,22]

- - Cast [2,3,6,7,8,21,22]

- - - Collars, flanges and other devices for fixing, jointing, clampingor spacing, for use in certain types of aircraft

761699 10 10 STQ


- - - "Quick change" apparatus for transforming passengertransport aeroplanes into goods transport aeroplanes andvice versa, for use in certain types of aircraft

761699 10 20 STQ


- - - Aluminium engine bracket, with dimensions of:- height of more than 10 mm but not more than 200 mm- width of more than 10 mm but not more than 200 mm- length of more than 10 mm but not more than 200 mmequipped with at least two fixing holes, made of aluminiumalloys ENAC-46100 or ENAC-42100 (based on the normEN:1706) with following characteristics:- internal porosity not more than 1 mm;- outer porosity not more than 2 mm;- Rockwell hardness HRB 10 or moreof a kind used in the production of suspensions systems forengines in motor vehicles

761699 10 30 STQ

1. Kg2. p/st



1 2A 2B 3 4 5 6 7

- - - Other [2,3,6,7,8,9,10,19]

- - - - Aluminium radiators and elements or sections of which suchradiator is composed, whether or not such elements areassembled in blocks

761699 10 91 STQ


- - - - Other 761699 10 99 STQ


- - Other [2,3,6,7,8,10,19,21,22]

- - - Hand-made [2,3,6,7,8,10,19,21,22]

- - - - Aluminium radiators and elements or sections of which suchradiator is composed, whether or not such elements areassembled in blocks

761699 90 01 STQ


- - - - Other 761699 90 09 STQ



1 2A 2B 3 4 5 6 7

- - - Other [2,3,6,7,8,10,19,32,33,34,35]

- - - - Collars, flanges and other devices for fixing, jointing,clamping or spacing, for use in certain types of aircraft

761699 90 10 STQ


- - - - Honeycomb aluminium blocks for use in the manufacture ofaircraft parts

761699 90 15 STQ

1. Kg2. p/st

6 % AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-3 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - - - "Quick change" apparatus for transforming passengertransport aeroplanes into goods transport aeroplanes andvice versa, for use in certain types of aircraft

761699 90 20 STQ


- - - - Metallised film:- consisting of eight or more layers of aluminium (CAS RN7429-90-5) of a purity of 99,8 % or more,- with an optical density of each aluminium layer of notmore than 3.0,- with each aluminium layer separated by a resin layer,- on a carrier film of PET, and- on rolls of up to 50 000 metres in length

761699 90 25 STQ



1 2A 2B 3 4 5 6 7

- - - - Plates and sheets of variable thickness of widths of1 200 mm or more, for use in certain types of aircraft

761699 90 30 STQ


- - - - Aluminum plate with:-a length of 36 mm or more but not more than 49 mm,-a width of 29,8 mm or more but not more than 45,2 mm,-a thickness of 0,18 mm or more but not more than0,66 mm,equipped with a polypropylene tape with:-a length of 6,5 mm or more but not more than 16,5 mm,-a width of 39 mm or more but not more than 56 mm,-characteristic allowing to create solid joint with Pouchexternal layer by melting process assuring leak and pressureproof sealing of Cell,-resistance to influence of electrolyte,for use in the manufacture of lithium-ion battery cells formotor vehicle batteries

761699 90 35 STQ

Kg AD-0 %, CA-0 %, CARIFORUM-0 %, CH-0 %, CI-0 %, CL-0 %,CM-0 %, CO-0 %, Central America-0 %, EC-0 %, EG-0 %,Eastern and Southern Africa States-0 %, European Union-0 %, FJ-0 %, FO-0 %, GE-0 %, GH-0 %, GSP – EnhancedFramework-0 %, GSP – General Framework (Excluding IN)-2.5 %, GSP – Least Developed Countries-0 %, IL-0 %, IS-0%, JP-3 %, KE-0 %, KR-0 %, LB-0 %, LI-0 %, MA-0 %, MD-0 %,MK-0 %, MX-0 %, NO-0 %, OCTs (Overseas Countries andTerritories)-0 %, PE-0 %, PG-0 %, PS-0 %, SADC EPA-0 %,SG-0 %, SM-0 %, TN-0 %, TR-0 %, UA-0 %, UK-Canadaagreement: re-imported goods-0 %[4], VN-0 %, WS-0 %,XC-0 %, XK-0 %, XL-0 %, ZA-0 %

- - - - Disc (target) with deposition material, consisting ofmolybdenum silicide:- containing 1mg/kg or less of sodium and- mounted on a copper or aluminium support

761699 90 60 STQ


- - - - Connecting components for use in the production ofhelicopter tail rotor shafts

761699 90 70 STQ

1. Kg2. p/st



1 2A 2B 3 4 5 6 7

- - - - Television pedestal stands with or without bracket forfixation to and stabilization of television cabinet case/body

761699 90 77 STQ

1. Kg2. p/st


- - - - Other [2,3,6,7,8,9,10,19,21,22,32,33,34,35]

- - - - - Aluminium radiators and elements or sections of whichsuch radiator is composed, whether or not such elementsare assembled in blocks

761699 90 91 STQ


- - - - - Other 761699 90 99 STQ


Footnotes

( 1 ) TN207-The export of arms and WMD-related items; Aviation fuels; Condensates and natural gas liquid; Curde oil; Helicopters and vessels; Industrial machinery, vehicles, iron, steel and othermetals; luxury goods; Refined petroleum products; gold and precious metals or diamonds to the Democratic People’s Republic of Korea is controlled (as well as related activities). Please referto the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 2 ) TN701-According to the Council Regulation (EU) No 692/2014 (OJ L183, p. 9) it shall be prohibited to import into European Union goods originating in Crimea or Sevastopol.The prohibition shallnot apply in respect of: (a) the execution until 26 September 2014, of trade contracts concluded before 25 June 2014, or of ancillary contracts necessary for the execution of such contracts,provided that the natural or legal persons, entity or body seeking to perform the contract have notified, at least 10 working days in advance, the activity or transaction to the competentauthority of the Member State in which they are established. (b) goods originating in Crimea or Sevastopol which have been made available to the Ukrainian authorities for examination, forwhich compliance with the conditions conferring entitlement to preferential origin has been verified and for which a certificate of origin has been issued in accordance with Regulation (EU) No978/2012 and Regulation (EU) No 374/2014 or in accordance with the EU-Ukraine Association Agreement.


( 3 ) TN702-According to the Council Regulation (EU) No 1351/2014 (OJ L365, p. 46), the export of goods and technologies suited for use in the sectors of transport; telecommunications; energy;prospection, exploatation and production of oil, gas and mineral resources is prohibited:(a) to any natural or legal person, entity or body in Crimea or Sevastopol, or(b) for use in Crimea orSevastopol.The prohibitions shall be without prejudice to the execution until 21 March 2015 of an obligation arising from a contract concluded before 20 December 2014, or by ancillarycontracts necessary for the execution of such contracts, provided that the competent authority has been informed at least five working days in advance.When related to the use in Crimea orSevastopol, the prohibitions do not apply where there are no reasonable grounds to determine that the goods and technology or the services are to be used in Crimea or Sevastopol.

( 4 ) CD727-Eligibility to benefit from this preference is subject to the presentation of an origin declaration stating the European Union origin of the goods, in the context of the Canada-EuropeanUnion Comprehensive Economic and Trade Agreement (CETA).

( 5 ) CD333-The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraftand parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended.In order to benefit from the suspension, the declarant shallpresent to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate.Thecertificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.

( 6 ) EX010-The export of nuclear and missile list items; graphite and relevant metals and other restricted goods to or for use in Iran may be controlled (as well as related activities). Please refer tothe Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 7 ) EX008-The export of arms and WMD-related items; Aviation fuels; Condensates and natural gas liquid; Curde oil; Helicopters and vessels; Industrial machinery, vehicles, iron, steel and othermetals; luxury goods; Refined petroleum products; gold and precious metals or diamonds to the Democratic People’s Republic of Korea is controlled (as well as related activities). Please referto the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 8 ) EX012-The export of energy-related goods for use in Russia and infrastructure-related goods and technology to Crimea is controlled (as well as related activities). Please refer to the Sanctionsto determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 9 ) TM861-This suspension does not apply to any mixtures, preparations or products made up of different components containing these products.( 10 ) EX005-The export of these items may be controlled under Retained Council Regulation (EC) No. 428/2009. Please refer to the Goods Checker to determine whether your items are controlled

and whether you need a licence from the Export Control Joint Unit.( 11 ) TN204-The export of these items may be controlled under Retained Council Regulation (EC) No. 428/2009. Please refer to the Goods Checker to determine whether your items are controlled

and whether you need a licence from the Export Control Joint Unit.( 12 ) CD572-The wastes mentioned in Article 3 (1) of Regulation (EC) No 1013/2006 shall be subject to the procedure of prior written notification and consent.( 13 ) CD573-The wastes mentioned in Article 3 (2) of Regulation (EC) No 1013/2006 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the

amount of waste shipped exceeds 20 kg( 14 ) CD574-If the wastes listed in Annex III (green list) display certain hazardous characteristics, the relevant provisions shall apply as if these wastes had been listed in Annex IV (amber list). See

Article 3 (3) of Regulation (EC) No 1013/2006.( 15 ) CD577-The waste explicitly destined for laboratory analysis (Article 3 (4) of Regulation (EC) No 1013/2006) to assess either its physical or chemical characteristics or to determine its suitability

for recovery or disposal operations shall not be subject to the procedure of prior written notification and consent. Instead, the procedural requirements of general information requirementsshall apply (Article 18 of Regulation (EC) No 1013/2006). The amount of such waste exempted when explicitly destined for laboratory analysis shall be determined by the minimum quantityreasonably needed to adequately perform the analysis in each particular case, and shall not exceed 25 kg.

( 16 ) CD576-Exports from the Community of the wastes, listed in Article 36 of Regulation (EC) No 1013/2006, are prohibited if they are destined for recovery in countries to which the OECD Decisiondoes not apply (C(2001)107/Final of the OECD Council concerning the revision of Decision C(92)39/Final on control of transboundary movements of wastes destined for recovery operations).

( 17 ) CD400-The import of iron, steel and aluminium scrap, including aluminium alloy scrap, ceased to be waste shall be subject to the presentation of a statement of conformity as indicated inAnnex III of Council Regulation (EU) No 333/2011.

( 18 ) TN200-The export of these items may be controlled under the Export Control Order 2008 as amended. Please refer to the Goods Checker to determine whether your items are controlled andwhether you need a licence from the Export Control Joint Unit.

( 19 ) EX001-The export of these items may be controlled under the Export Control Order 2008 as amended. Please refer to the Goods Checker to determine whether your items are controlled andwhether you need a licence from the Export Control Joint Unit.

( 20 ) TN209-The export of nuclear and missile list items; graphite and relevant metals and other restricted goods to or for use in Iran may be controlled (as well as related activities). Please refer tothe Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 21 ) EU003-According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories ofships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs controlof the use of such goods.

( 22 ) TM510-1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10;8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenanceor conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels.2. Customs duties shall be suspended in respect of:(a) goods intended forincorporation in drilling or production platforms:(1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or(2) floating or submersible, of subheading8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms.(b) tubes, pipes, cables and theirconnection pieces, linking these drilling or production platforms to the mainland.

( 23 ) EU001-Suspension of duties is subject to Authorised-Use customs supervision in accordance with Chapter 4 of The Customs (Special Procedures and Outward Processing) (EU Exit) Regulations2018 (UK Statutory Instruments 2018 No. 1249)

( 24 ) EU002-For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.


( 25 ) CD655-The application of the individual duty rate for this company shall be conditional upon presentation to the customs authorities of the Member States of a valid commercial invoice, inwhich must appear a declaration signed by an officer of the entity issuing the commercial invoice, in the following format:(1) the name and function of the official of the entity issuing thecommercial invoice;(2) the following declaration:"‘I, the undersigned, certify that the (volume) of certain aluminium foils in rolls, sold for export to the European Union covered by this invoice,was manufactured by (company name and registered seat) (TARIC additional code) in the People’s Republic of China. I declare that the information provided in this invoice is complete andcorrect.Date and signature"If no such invoice is presented, the duty rate applicable to all other companies shall apply.

( 26 ) TN100-Entry under this subheading is subject to the conditions laid down in the relevant provisions of the European Union (see Article 254 of Regulation (EU) No 952/2013).( 27 ) NM218-A door or window with or without its frame or threshold is considered as one piece( 28 ) TN208-The export of goods relating to chemical and biological weapons; crude oil and natural gas equipment; aviation fuel and aviation fuel additives; Electricity production; Gold and precious

metals or diamonds; luxury goods; internal repression goods and technology; interception and monitoring goods and technology to or for use in Syria is controlled (as well as related activities).Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 29 ) EX013-The export of goods relating to chemical and biological weapons; crude oil and natural gas equipment; aviation fuel and aviation fuel additives; Electricity production; Gold and preciousmetals or diamonds; luxury goods; internal repression goods and technology; interception and monitoring goods and technology to or for use in Syria is controlled (as well as related activities).Please refer to the Sanctions to determine whether your items are controlled and whether you need a licence from the Export Control Joint Unit.

( 30 ) PI027-This suspension only applies to empty medical gas cylinders, portable, for oxygen, fitted with a valve and a pressure and flow regulator (aluminium), falling under this code( 31 ) CD990-If the declared goods are described in the "TR" footnotes linked to the measure and they are not medical technical goods and they won't be used for the exclusive purpose of public

display in a museum in view of their historic significance,export/import is prohibited (Regulation (EU) 2019/125 (OJ L 30).( 32 ) TR016-Thumb-cuffs, finger-cuffs, thumbscrews and finger-screws. This item includes both serrated and non-serrated cuffs and screws( 33 ) TR017-Bar fetters, weighted leg restraints and gang chains comprising bar fetters or weighted leg restraints.1. Bar fetters are shackles or ankle rings fitted with a locking mechanism, linked by

a rigid bar which is typically made of metal2. This item includes bar fetters and weighted leg restraints which are linked to ordinary handcuffs by means of a chain( 34 ) TR018-Cuffs for restraining human beings, designed to be anchored to a wall, floor or ceiling( 35 ) EX003-The export of these items may be controlled under Retained Regulation (EU) 2019/125. Please refer to the Goods Checker to determine whether your items are controlled and whether

you need a licence from the Export Control Joint Unit.


Chapter 76 Additional InformationTariff Quotas/Ceilings

CommodityCode

Description Country oforigin

TariffQuotaOrder No.

Quota rate Quota period Quotaunits

Documentary evidencerequired

1 2 3 4 5 6 7 8

7603 10 00 007603 20 00 007604 10 10 117604 10 10 907604 10 90 117604 10 90 197604 10 90 257604 10 90 297604 10 90 807604 10 90 897604 21 00 107604 21 00 907604 29 10 107604 29 10 307604 29 10 407604 29 10 907604 29 90 107604 29 90 207604 29 90 907605 11 00 007605 19 00 107605 19 00 907605 21 00 007605 29 00 107605 29 00 907606 11 10 257606 11 10 307606 11 10 867606 11 10 897606 11 91 257606 11 91 307606 11 91 867606 11 91 897606 11 93 257606 11 93 307606 11 93 867606 11 93 897606 11 99 257606 11 99 307606 11 99 867606 11 99 897606 12 11 00

Powders of non-lamellar structure EuropeanUnion,Andorra,San Marino,Ceuta,Melilla

059176 Free 01/01/2021 -31/12/2021

Tonne(1000 kg)


7606 12 19 007606 12 20 237606 12 20 257606 12 20 307606 12 20 857606 12 20 867606 12 20 897606 12 92 237606 12 92 257606 12 92 307606 12 92 917606 12 92 957606 12 92 977606 12 93 107606 12 93 857606 12 93 867606 12 93 887606 12 99 107606 12 99 217606 12 99 257606 12 99 307606 12 99 857606 12 99 867606 12 99 887606 91 00 257606 91 00 307606 91 00 867606 91 00 887606 92 00 237606 92 00 257606 92 00 307606 92 00 857606 92 00 867606 92 00 887607 11 11 117607 11 11 197607 11 11 907607 11 19 107607 11 19 307607 11 19 407607 11 19 507607 11 19 607607 11 19 917607 11 19 947607 11 19 967607 11 90 447607 11 90 467607 11 90 487607 11 90 497607 11 90 517607 11 90 527607 11 90 537607 11 90 547607 11 90 567607 11 90 657607 11 90 67


059176 Free 01/01/2021 -31/12/2021

Tonne(1000 kg)


7607 11 90 717607 11 90 727607 11 90 737607 11 90 747607 11 90 757607 11 90 767607 11 90 777607 11 90 787607 11 90 797607 11 90 917607 11 90 927607 11 90 937607 11 90 947607 11 90 967607 19 10 117607 19 10 197607 19 10 907607 19 90 107607 19 90 757607 19 90 847607 19 90 867607 19 90 887607 19 90 927607 20 10 007607 20 90 107607 20 90 907608 10 00 117608 10 00 197608 10 00 207608 10 00 807608 10 00 897608 20 20 107608 20 20 207608 20 20 907608 20 81 107608 20 81 207608 20 81 907608 20 89 107608 20 89 207608 20 89 307608 20 89 407608 20 89 907609 00 00 107609 00 00 907610 10 00 007610 90 10 007610 90 90 107610 90 90 907611 00 00 007612 10 00 007612 90 20 007612 90 30 007612 90 80 007613 00 00 107613 00 00 207613 00 00 90


059176 Free 01/01/2021 -31/12/2021

Tonne(1000 kg)


7614 10 00 007614 90 00 007615 10 10 107615 10 10 907615 10 30 007615 10 80 107615 10 80 907615 20 00 007616 10 00 107616 10 00 407616 10 00 917616 10 00 997616 91 00 007616 99 10 107616 99 10 207616 99 10 307616 99 10 917616 99 10 997616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99


059176 Free 01/01/2021 -31/12/2021

Tonne(1000 kg)

7607 20 10 007607 20 90 107607 20 90 90

Of a thickness (excluding any backing) of less than 0,021 mm El Salvador 057076 Free 01/01/2021 -31/12/2021

Tonne(1000 kg)


Chapter 76 Additional InformationProhibitions and Restrictions

Commodity Code Import/Export

Description Requirements DocumentCode/s

1 2 3 4 5

7601 10 00 007601 20 20 107601 20 20 907601 20 80 007602 00 11 007602 00 19 007602 00 90 007603 10 00 007603 20 00 007604 10 10 117604 10 10 907604 10 90 117604 10 90 197604 10 90 257604 10 90 297604 10 90 807604 10 90 897604 21 00 107604 21 00 907604 29 10 107604 29 10 307604 29 10 407604 29 10 907604 29 90 107604 29 90 207604 29 90 907605 11 00 007605 19 00 107605 19 00 907605 21 00 007605 29 00 107605 29 00 907606 11 10 257606 11 10 307606 11 10 867606 11 10 897606 11 91 257606 11 91 307606 11 91 867606 11 91 897606 11 93 257606 11 93 307606 11 93 867606 11 93 897606 11 99 257606 11 99 30

Import Import prohibition (277)


7606 11 99 867606 11 99 897606 12 11 007606 12 19 007606 12 20 237606 12 20 257606 12 20 307606 12 20 857606 12 20 867606 12 20 897606 12 92 237606 12 92 257606 12 92 307606 12 92 917606 12 92 957606 12 92 977606 12 93 107606 12 93 857606 12 93 867606 12 93 887606 12 99 107606 12 99 217606 12 99 257606 12 99 307606 12 99 857606 12 99 867606 12 99 887606 91 00 257606 91 00 307606 91 00 867606 91 00 887606 92 00 237606 92 00 257606 92 00 307606 92 00 857606 92 00 867606 92 00 887607 11 11 117607 11 11 197607 11 11 907607 11 19 107607 11 19 307607 11 19 407607 11 19 507607 11 19 607607 11 19 917607 11 19 947607 11 19 967607 11 90 447607 11 90 467607 11 90 487607 11 90 497607 11 90 517607 11 90 527607 11 90 537607 11 90 54



7607 11 90 567607 11 90 657607 11 90 677607 11 90 717607 11 90 727607 11 90 737607 11 90 747607 11 90 757607 11 90 767607 11 90 777607 11 90 787607 11 90 797607 11 90 917607 11 90 927607 11 90 937607 11 90 947607 11 90 967607 19 10 117607 19 10 197607 19 10 907607 19 90 107607 19 90 757607 19 90 847607 19 90 867607 19 90 887607 19 90 927607 20 10 007607 20 90 107607 20 90 907608 10 00 117608 10 00 197608 10 00 207608 10 00 807608 10 00 897608 20 20 107608 20 20 207608 20 20 907608 20 81 107608 20 81 207608 20 81 907608 20 89 107608 20 89 207608 20 89 307608 20 89 407608 20 89 907609 00 00 107609 00 00 907610 10 00 007610 90 10 007610 90 90 107610 90 90 907611 00 00 007612 10 00 007612 90 20 007612 90 30 007612 90 80 00



7613 00 00 107613 00 00 207613 00 00 907614 10 00 007614 90 00 007615 10 10 107615 10 10 907615 10 30 007615 10 80 107615 10 80 907615 20 00 007616 10 00 107616 10 00 407616 10 00 917616 10 00 997616 91 00 007616 99 10 107616 99 10 207616 99 10 307616 99 10 917616 99 10 997616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99



7601 10 00 007601 20 20 107601 20 20 907601 20 80 007602 00 11 007602 00 19 007602 00 90 007603 10 00 007603 20 00 007604 10 10 117604 10 10 907604 10 90 117604 10 90 197604 10 90 257604 10 90 297604 10 90 807604 10 90 897604 21 00 107604 21 00 907604 29 10 107604 29 10 307604 29 10 407604 29 10 907604 29 90 107604 29 90 207604 29 90 907605 11 00 007605 19 00 107605 19 00 907605 21 00 007605 29 00 107605 29 00 907606 11 10 257606 11 10 307606 11 10 867606 11 10 897606 11 91 257606 11 91 307606 11 91 867606 11 91 897606 11 93 257606 11 93 307606 11 93 867606 11 93 897606 11 99 257606 11 99 307606 11 99 867606 11 99 897606 12 11 007606 12 19 007606 12 20 237606 12 20 257606 12 20 307606 12 20 857606 12 20 867606 12 20 89

Export Export control on restricted goods and technologies (717) B: Other certificates: Export authorisation for restricted goodsand technologies (C052)

B: Particular provisions: Goods for which a licence is notrequired (Y999)

C052Y999


7606 12 92 237606 12 92 257606 12 92 307606 12 92 917606 12 92 957606 12 92 977606 12 93 107606 12 93 857606 12 93 867606 12 93 887606 12 99 107606 12 99 217606 12 99 257606 12 99 307606 12 99 857606 12 99 867606 12 99 887606 91 00 257606 91 00 307606 91 00 867606 91 00 887606 92 00 237606 92 00 257606 92 00 307606 92 00 857606 92 00 867606 92 00 887607 11 11 117607 11 11 197607 11 11 907607 11 19 107607 11 19 307607 11 19 407607 11 19 507607 11 19 607607 11 19 917607 11 19 947607 11 19 967607 11 90 447607 11 90 467607 11 90 487607 11 90 497607 11 90 517607 11 90 527607 11 90 537607 11 90 547607 11 90 567607 11 90 657607 11 90 677607 11 90 717607 11 90 727607 11 90 737607 11 90 747607 11 90 757607 11 90 767607 11 90 77



C052Y999


7607 11 90 787607 11 90 797607 11 90 917607 11 90 927607 11 90 937607 11 90 947607 11 90 967607 19 10 117607 19 10 197607 19 10 907607 19 90 107607 19 90 757607 19 90 847607 19 90 867607 19 90 887607 19 90 927607 20 10 007607 20 90 107607 20 90 907608 10 00 117608 10 00 197608 10 00 207608 10 00 807608 10 00 897608 20 20 107608 20 20 207608 20 20 907608 20 81 107608 20 81 207608 20 81 907608 20 89 107608 20 89 207608 20 89 307608 20 89 407608 20 89 907609 00 00 107609 00 00 907610 10 00 007610 90 10 007610 90 90 107610 90 90 907611 00 00 007612 10 00 007612 90 20 007612 90 30 007612 90 80 007613 00 00 107613 00 00 207613 00 00 907614 10 00 007614 90 00 007615 10 10 107615 10 10 907615 10 30 007615 10 80 107615 10 80 90



C052Y999


7615 20 00 007616 10 00 107616 10 00 407616 10 00 917616 10 00 997616 91 00 007616 99 10 107616 99 10 207616 99 10 307616 99 10 917616 99 10 997616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99



C052Y999


7601 20 20 107601 20 20 907601 20 80 007602 00 90 007603 10 00 007603 20 00 007604 29 10 107604 29 10 307604 29 10 407604 29 10 907604 29 90 107604 29 90 207604 29 90 907605 29 00 107605 29 00 907606 92 00 237606 92 00 257606 92 00 307606 92 00 857606 92 00 867606 92 00 887608 20 81 107608 20 81 207608 20 81 907608 20 89 107608 20 89 207608 20 89 307608 20 89 407608 20 89 907609 00 00 107609 00 00 907611 00 00 007612 10 00 007612 90 80 007616 99 10 107616 99 10 207616 99 10 307616 99 10 917616 99 10 997616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99

Export Export authorization (Dual use) (478) B: Export licence: Dual use export authorisation (Regulation428/2009 and its amendments). (X002)


X002Y999


7602 00 11 007602 00 19 007602 00 90 007614 10 00 007614 90 00 00

Import Import control - waste (755) E: Other certificates: Information document accompanyingshipments of waste as mentioned in Regulation (EC) No1013/2006 (OJ L 190) – Article 18 and Annex VII (C672)

E: Other certificates: Notification document as mentioned inRegulation (EC) No 1013/2006 (OJ L 190) - Article 4 and Annex IA(C669)

E: Particular provisions: Product not subjected to the provisionsof Regulation (EC) No 1013/2006 (OJ L 190) (Y923)

E: 20.00 kg

I: Other certificates: Information document accompanyingshipments of waste as mentioned in Regulation (EC) No1013/2006 (OJ L 190) – Article 18 and Annex VII (C672)

I: Other certificates: Movement document as mentioned inRegulation (EC) No 1013/2006 (OJ L 190) – Article 4 and Annex IB(C670)

I: Particular provisions: Product not subjected to the provisionsof Regulation (EC) No 1013/2006 (OJ L 190) (Y923)

I: 20.00 kg

C672C669Y923C672C670Y923

7602 00 11 007602 00 19 007602 00 90 007614 10 00 007614 90 00 00

Export Export control - Waste (751) E: Other certificates: Information document accompanyingshipments of waste as mentioned in Regulation (EC) No1013/2006 (OJ L 190) – Article 18 and Annex VII (C672)

E: Other certificates: Notification document as mentioned inRegulation (EC) No 1013/2006 (OJ L 190) - Article 4 and Annex IA(C669)

E: Particular provisions: Product not subjected to the provisionsof Regulation (EC) No 1013/2006 (OJ L 190) (Y923)

E: 20.00 kg

I: Other certificates: Information document accompanyingshipments of waste as mentioned in Regulation (EC) No1013/2006 (OJ L 190) – Article 18 and Annex VII (C672)

I: Other certificates: Movement document as mentioned inRegulation (EC) No 1013/2006 (OJ L 190) – Article 4 and Annex IB(C670)

I: Particular provisions: Product not subjected to the provisionsof Regulation (EC) No 1013/2006 (OJ L 190) (Y923)

I: 20.00 kg

C672C669Y923C672C670Y923

7602 00 90 00 Import Restriction on entry into free circulation (475) B: Other certificates: The statement of conformity with the end-of-waste criteria referred to in Article 5(1) of Council Regulation(EU) No 333/2011 is to be issued for each consignment of scrapmetal ceased to be waste (C058)

C058


7603 10 00 007603 20 00 007616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99

Import Restriction on entry into free circulation (465)

7616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99

Import Import prohibition on goods for torture and repression (705) Y: Other certificates: Authorisation for export or import of goodsthat could be used for torture (Regulation (EU) 2019/125) (C064)

Y: Particular provisions: Goods other than those described inthe TR footnotes linked to the measure (Y904)

C064Y904

7616 99 90 017616 99 90 097616 99 90 107616 99 90 157616 99 90 207616 99 90 257616 99 90 307616 99 90 357616 99 90 607616 99 90 707616 99 90 777616 99 90 917616 99 90 99

Export Goods for torture and repression, export restriction (708) B: National Document: Authorisation for torture goods (9106)


9106Y999


Chapter 76 Additional InformationAnti-dumping duties

Commodity Code Country of Origin Additional Code Description/Rate of Duty/Additional Information1 2 3 4

7607 11 11 117607 11 11 197607 19 10 117607 19 10 19

CN B299 CeDo (Shanghai) Ltd, Shanghai

B300 Ningbo Times Aluminium Foil Technology Co. Ltd, Ningbo

B301 Ningbo Favored Commodity Co. Ltd., Yuyao City

B302 Able Packaging Co., Ltd, Shanghai

B303 Guangzhou Chuanlong Aluminium Foil Product Co. Ltd, Guangzhou

B304 Ningbo Ashburn Aluminium Foil Products Co. Ltd, Yuyao City

B305 Shanghai Blue Diamond Aluminium Foil Manufacturing Co. Ltd, Shanghai

B306 Weifang Quanxin Aluminium Foil Co. Ltd, Linqu

B307 Zhengzhou Zhuoshi Tech Co. Ltd, Zhengzhou City

B308 Zhuozhou Haoyuan Foil Industry Co. Ltd, Zhouzhou City

B309 Zibo Hengzhou Aluminium Plastic Packing Material Co. Ltd, Zibo

B310 Yuyao Caelurn Aluminium Foil Products Co. Ltd, Yuyao

B999 35.6 %

Definitive anti-dumping duty

Other


76… · square), triangular or polygonal cross-section may have corners rounded along their whole...

Documents