779 manual

在使用本机前请务必详细阅读安全须知及操作说明，并保存此手册以备后续参考在使用本机前请务必详细阅读安全须知及操作说明，并保存此手册以备后续参考。。 773A773A，，773B773B，，779779Please read instructions thoroughly before operation and retail it for future reference.ENG_773A,773B,779Please read instructions thoroughly before operation and retail it for future reference.ENG_773A,773B,779

4/94/9路路数字硬盘录像机数字硬盘录像机中英文使用手册中英文使用手册

4/9 CH MPEG4 DVRUserUser’’S ManualS Manual

ContentsUser Manual

Chapter 1: DVR Features….....…........................................................................................1DVR Feature .....................................................................................................................1

Chapter 2: Overview..............................................................................................................22.1 Front Panel..................................................................................................................22.2 Rear Panel...................................................................................................................32.3 Remote Control(just for reference).............................................................................4

Chapter 3: Installation……..................................................................................................53.1 Install Hard Disk.........................................................................................................53.2 Connecting Camera and Monitor................................................................................53.3 VGA Output(optional)................................................................................................53.4 Connecting Power Supply...........................................................................................5

Chapter 4: Starting the DVR............................................................................................6

4.1 Firmware Version........................................................................................................64.2 Detecting Installed Hard Drive...................................................................................64.3 Format Hard Drive.......................................................................................................6

Chapter 5: DVR Menu System..........................................................................................75.1 Navigating the menus..................................................................................................75.2 Menu Overview...........................................................................................................75.3 Camera Setup...............................................................................................................85.4 Record Setup................................................................................................................85.5 Record Frame Rate......................................................................................................85.6 Video Quality...............................................................................................................95.7 Record Schedule..........................................................................................................95.8 Sensor Setup................................................................................................................95.9 H/W Sensor Setup......................................................................................................105.10 Motion Detector Setup.............................................................................................105.11 Hard Drive Setup.....................................................................................................115.12 Miscellaneous Setup – Change Password................................................................115.13 Miscellaneous Setup – Set Time..............................................................................125.14 Miscellaneous Setup - Hidden Channel……….......................................................125.15 Miscellaneous Setup – Audio Port Setup.................................................................125.16 Miscellaneous Setup - PTZ Setup…........................................................................135.17 Miscellaneous Setup - Image Parameters……........................................................135.18 Miscellaneous Setup - Password Enable………......................................................14

5.19 Miscellaneous Setup - Keypad tones………...........................................................145.20 Miscellaneous Setup – VGA Setup.........................................................................145.21 Network Setup.........................................................................................................155.22 language...................................................................................................................175.23 Video Backup(For Optional USB Memory Stick Backup).....................................175.24 Reset Menu..............................................................................................................195.25 NTSC/PAL Output select........................................................................................19

Chapter 6: Record................................................................................................................20

User Manual

6.1 Start Recording...........................................................................................................206.2 Audio Recording........................................................................................................206.3 Stop Recording...........................................................................................................216.4 Estimated Recording Length......................................................................................21

Chapter 7: Playback..............................................................................................................22

7.1 Playback Control........................................................................ ................................22Chapter 8: USB Progamming(Optional).............................................................................23

8.1 Driver Installtion.........................................................................................................238.2 Program Interface.......................................................................................................238.3 Program Running........................................................................................................24

Chapter 9: Specification........................................................................................................28Chapter 10: Appendix….......................................................................................................29

10.1 System Connection Diagram....................................................................................2910.2 Accessories ..............................................................................................................29

DVR Feature

Chapter 1: DVR Features

User Manual

MPEG4 Compression;

4 Channel: 4 BNC Camera Inputs – 2 BNC Video Outputs；4 Channel: 1 Audio Input – 1 Audio Ouput；

9 Channel: 9 BNC Camera Inputs – 1 BNC Video Output；9 Channel: 1 Audio Input – 1 Audio Ouptu；

High-resolution playback picture quality； System Format:NTSC/PAL； SOC single chip, high stability； Linux Operating system

Supports manual / timer / motion / alarm / remote recording functions； Time Schedule,Alarm and Motion Triggered Recording Modes； Video Loss Detection； VGA Output (Optional);

Supports PTZ Control via RS485 Port； Password protection function； Remot Control； Hard Disk Support up to 500G； USB Memory stick Backup (Optional)； System auto recovery after power failure.

1

2.1 Front Panel

Chapter 2: Overview

User Manual

2.1.1 4-channel DVR front panel(just for reference)

1. SEARCH 2. MUTE: turn on/off audio output3. REC：record4. PLAY5. UP 6. DOWN 7. REW：rewind 8. FWD：forward 9. CH-：view previous channel10. Power LED

11. HDD LED12. CH+：view next channel13. MENU/ESC/LEFT14. SEL/EDIT/RIGHT15. PTZ：enter PTZ mode16. STOP17. PAUSE18. ALL：view all channels19. IR receiver

2.1.2 9-channel DVR front panel(just for reference)

1. SEARCH 2. MUTE: turn on/off audio output3. REC：record4. PLAY5. UP

17.

USE11. HDD LED12. CH+：view next channel13. MENU/ESC/LEFT14. SEL/EDIT/RIGHT15. PTZ：enter PTZ mode

6. DOWN 7. REW：rewind 8. FWD：forward 9. CH-：view previous channel10. Power LED

16. STOP17. PAUSE18. ALL：view all channels

19. IR receiver

2.2 Rear Panel

2.2.1 4 4-channel DVR rear panel(just for reference)

1. FAN2. Audio Outputs3. Audio inputs4. Video outputs5. CH2：Video input6. CH1：Video input7. VGA output（Optional）

8. USB port9. LAN：Ethernet port10. CH4：video input 11. CH3：video input 12. RS485/SENSOR/ALARM 13. DC Power Input Jack

2.2.2 9-channel DVR rear panel(just for reference)

1. FAN

3

2. Audio input

3. Video output 12. CH9：video inputUser Manual

4. CH4：video input 5. CH3：video input 6. CH2：video input7. CH1：video input 8. VGA output (Optional) 9. USB Port10. LAN：Ethernet port11.Audio output

2.3 Remote Control(just for reference)

13. CH8：video input 14. CH7：video input 15. CH6：video input 16. CH5：video input 17. RS485/SENSOR/ALARM18. DC Power Input Jack

1-90

ALL

Channel Select 1-9Number

Menu Enter or Exit Menu▲

▼

SEL

●

■

Move Up/LeftMove Down/RightSelect/Modify ItemRewindPlay RecordingFast ForwardRecordPauseStop Recording/Playback

SEA/A Search or switch the audio channelsMute Turn on/off audio output

4

Display all Channels

3.1 Install Hard Disk

Chapter 3:Installation

User manual

NOTICE： Don’t take out HDD when DVR is running. Make sure the HDD is set to be MASTER according to the hard drive

manual.(1) Remove the screws around the top cover; (2) Remove the top cover carefully;(3) Connect the power cord and data cable to hard disk carefully;(4) Use the provided screws to fix hard disk on the rack inside and then replace the top cover of the case.

3.2 Connecting Camera and MonitorThere are 4/9 camera inputs and 2/1Monitor outputs with BNC connectors(Refer to 2.2 Rear Panel).

3.3 VGA Output(Optional)There is 1 CRT or LCD monitor output with VGA port.

3.4 Connectiong Power SupplyPlease only use the power adapter supplied with the DVR。

Chapter 4:Starting the DVR

User manual

V2.0V-EN-BG

2008.XX.XX

4.2 Detecting Installed Drive

CHECKING HDD……

MASTER [WDC WD3200AAJB-00T]SLAVE……

4.3 Format Hard Drive

CHECKING HDD...MASTER [W3200AB-00T] –NEW-DVRFORMAT HDD CONFIRM(SEL)FORMAT/(MENU) CANCEL?

After connecting the power adapter and turning on the power button,the system will boot-up and display the version and released date of the DVR firmware.

DVR will detect the installed hard drive and display the hard drive information.

When the DVR detects a new hard drive,you will be prompted to format the hard drive before using the DVR.Press [SEL] to format or press[MENU] to cancel.

4.1 Firmware Version

Menu Directory

CAMERA SETUP

RECORD SETUP

RECORD FRAMERATE

VIDEO QUALITY

RECORD SCHEDULE

SENSORSETUP

HARD DRIVE SETUP

MISCELLANEOUS SETUP

NETWORK SETUP

LANGUAGE

VIDEO BACKUP

RESET MENU

Chapter 5:DVR Menu System

User manual

Press[MENU]: Into the menu。[▲，▼，◄◄ and ►►]:Move focus。[SEL]: Select/Modifly。[MENU]:Press the button again to withdraw from the menu or menu Enter on a menu.Note:if DVR supports USB memory stick,“VIDEO BACKUP”item is available.Otherwise,there’s no this item in main menu.

5.2 Menu Overview

5.1 Navigating the Menus

MAIN MENUCAMER SETUPRECORD SETUP

RECORD FRAMERATE VIDEO QUALITY NORMAL RECORD SCHEDULE SENSOR SETUP HARD DRIVE SETUP MISCELOLANEOUS SETUP NETWORK SETUP LANGUAGE ENGLISH VIDEO BACKUP RESET MENU

( )MOVE (SEL)SELECT (MENU)EXIT

CHANGE PASSWORDSET TIMEHIDDEN CHANNELAUDIO PORT SETUPPTZ SETUPIMAGE PARAMETERSPASSWORD ENABLEKEYPAD TONESVGA SETUP

MAIN MENU

5.3 Camera Setup1 ON 2 ON

CAMERA SETUP

3 ON 4 ON


User manual

Camera Setup allows you to turn cameras on or off.Press[▲，▼，◄◄ and ►►] buttons to select a channel and then press [SEL] to modify the setting “ON” or “OFF”.

Note:If a camera channel is set to OFF,it will not be recorded(Refer to 6.4 Record Setup)

5.4 Record setup 1 ON 2 ON RECORD SETUP

3 ON 4 ON


5.5 Record Frame Rate

1 12FPS 2 12FPSRECORD FRAMERATE

TOTAL 48FPS

3 12FPS 4 12FPS

( )MOVE (SEL)+ (■)- (MENU)EXIT

Record Setup allows you to set up recording channels.Press[▲，▼，◄◄ and ►►] buttons to select a channel, and then press [SEL] to modify the setting to ON or OFF.If a channel is disabled in Camera Setup,it will not record and the DVR will display “NOCAM”on screen.

The total frame rate is 50fps(PAL)or 60fps(NTSC).You can set the frame rate for the channel which you select to record.If the sum of the frame rate you select for all cameras is more than 50fps(PAL)/60fps(NTSC),the DVR will automatically adjust the largest frame rate value to a smaller value.

Press[▲，▼，◄◄ or ►►]button to select a channel,and then press [SEL] to increase the value or press [■STOP] to reduce the value.

MAIN MENUCAMERA SETUPRECORD SETUP

RECORD FRAMERATE VIDEO QUALITY NORMAL RECORD SCHEDULE SENSOR SETUP HARD DRIVE SETUP MISCELLANEOUS SETUP NETWORK SETUP LANGUAGE ENGLISH VIDEO BACKUP RESET MENU( )MOVE (SEL)SELECT (MENU)EXIT

RECORD SCHEDULE AM PM 0…3…6…9…0…3…6…9…

NO-RECORD NORMAL-RECORD S SENSOR-RECORD


SENSORED SETUPSENSORED RECORD TIME 30ALARM ON TIME OFF

H/W SENSOR SETUPMOTION DETECTOR SETUP


User manualNote:Higher frame rate shows smooth images,but

requires more hard drivespace.5.6 Video Quality

Setting the Record Schedule allows you to customize the type of recording depending on the time of day.Video Quality has 4 different settings:Highest,High,Normal and Low.The higher the video quality,the better quality of Images,however higher quality images require more hard drive space.Press [SEL] to change the quality setting.

5.7 Record Schedule

The time line indicates

5.8 Sensor Setup

NO-RECORD[ white]:DVR will not record during the time.NORMAL-RECORD[ red]DVR will record continuously.SENSOR-RECORD[ red+s]DVR will record when sensor or motion is triggered.NOTE: In order to activate the record schedule,press the [ ]record button when viewing the cameras. After pressing the [ ]record button,if schedule is set to “NORMAL-RECORD”,the DVR will start to record immediately;if the schedule is set to be “SENSOR-RECORD”,the DVR will not start recording until a motion is detected by the DVR or an installed sensor is triggered.

The time line indicates 24 hours of a day based on AM/PM (0=12).Press [▲，▼，◄◄ or ►►]button to modify the recording mode.Select a time point,press[SEL] to change the quality setting.

Sensor Record time indicates how long the recording time is when the motion or sensor is triggered.Alarm On Time indicates whether the buzzer will sound when motion is detected.

User Manual

CONT：Continuous alarm until any key is pressed.OFF：No alarmNote:Sensored Record Time and Alarm On Time are measured in seconds

5.9 H/W Sensor Setup

H/W SENSOR SETUPCHANNEL-1 TYPE:NORMAL-

OPENCHANNEL-2 NOT INSTALLCHANNEL-3 NOT INSTALL CHANNEL-4 NOT INSTALL


Note:Sensors and extension alarm are not included with the DVR system and maybe purchased separately.

HARDWARE SENSOR SETUP:There are 3 different modes for sensor setting:NOT INSTALLED,NORMAL-CLOSE and NORMAL-OPEN.Consult the alarm purchased for more details on which setting is required.

Note:For 4-ch DVR,there are 4CH inputs of the sensor; For 9-ch DVR,there are 8CH inputs of the sensor.

5.10 Motion Detector Setup

MOTION DETECTOR SETUP

CH1 ON LEVEL1 AREACH2 ON LEVEL1 AREACH3 ON LEVEL2 AREACH4 ON LEVEL2 AREA


This section allows you to set up motion detection options for each camera.MOTION DETECTOR SETUP:ON/OFF:Enable or disable motion detection recording.LEVEL:Sensitivity for motion detection.There are 3 levels sensitivity:Level 1-low,3-highestAREA:Select detectable area on the screen.

Area Selection:Press[▲，▼，◄◄ or ►►] button to select a block,and press [SEL]button to set the block to detect motion.The area is detectable when it is clear,the area is not detectable when it is covert by shadow.

10

MISCELLANEOUS SETUPCHANGE PASSWORDSETTIMEHIDDEN CHANNEL [1]AUDIO PORT SETUPPTZ SETUPIMAGE PARAMETERS [CH1]PASSWORD ENABLE [OFF]KEYPAD TONES [ON]VGA SETUP [1024*768 60HZ]( )MOVE (SEL)SELECT (MENU)EXIT

CURRENT PASSWORD [------] NEW PASSWORD [------]CONFIRM PASSWORD [------]

5.11 Hard Drive Setup

User Manual

HARD DRIVE SETUPOVERWRITE ENABLED [ON]ST3160215A MASTER HDD SIZE 160133MB MASTER HDD USED 124931MB 78%MASTER HDD FORMATSLAVE HDD SIZE N/A SLAVE HDD USED N/A SLAVE HDD FORMAT


This section will display the current hard drive status and usage optionsOVERWRITE ENABLED:ON:overwrite oldest video when hard drive is full.OFF:stop recording when hard drive is full.

HDD SIZE:indicates the total capacity of the hard drive installed in the DVR.HDD USED:indicates the space used in the hard disk drive for recording and the percent used.HDD FORMAT:will erase all video and data on the installed hard drive and make it readable by the DVR.Note:You will be prompted for the password when formatting a hard drive.The default password is “111111”5.12 Miscellaneous Setup – Change Password

This option allows you to change the system password.The password must be composed with six characters.All keys can be used as password key except the [MENU] key,which is used to exit.

Enter the current password first,and then enter six characters as your new password,repeat the new password to confirm. If you forget your password,please contact technical support for assistance.

11

Press“Stop”button to disable all areas,Press“All”button to enable all areas

MISCELLANEOUS SETUPCHANGE PASSWORDSETTIMEHIDDEN CHANNEL [1]AUDIO PORT SETUPPTZ SETUPIMAGE PARAMETERS [CH1]PASSWORD ENABLE [OFF]KEYPAD TONES [ON]VGA SETUP [1024*768 60HZ]( )MOVE (SEL)SELECT (MENU) EXIT

5.13 Miscellaneous Setup–Set time

SET TIME

2008/11/11 17:50:01


5.14 Miscellaneous Setup – Hidden Channel

User Manual

The system date and time format is YYYY/MM/DD and HH:MM:SS.Press[◄◄] or [►►] button to select the data to modify,press [SEL] to modify.Press [MENU] to save and return to previous menu.

The system provides a function to hide a channel in monitoring mode. The selected channel can still be recorded while it’s hidden;the hidden picture is viewable during playing back.

Press [SEL] to select a channel to hide.

5.15 Miscellaneous Setup – Audio Port Setup

You can select the audio recording function to NO or OFF,and select the video channel that you like to record the audio on .

AUDIO PORT SETUPAUDIO PORT1-VIDEO CHANNEL [

4 ]AUDIO PORT1-RECORD

[OFF]AUDIO PORT2-VIDEO CHANNEL [

1 ]AUDIO PORT2-RECORD

[OFF]

Note:For 4-ch DVR,there are 1 audio inputs; For 9-ch DVR,there are only 1 audio input.

5.16 Miscellaneous Setup PTZ Setup

PTZ SETUP

SPEED [4800]PROTOCOL [PELCO-D]CAMERA-[1] ID[1]

( )MOVE ( )CAM ID

(SEL)SELECT (MENU)EXIT

Userr Manual

SPEED:Set the baud rate (4800，9600，19200，38400) match to your speed dome.PROTOCOL:Supports“PELCO-D” and “PELCO-P”. Select the protocol .According to your speed dome’s protocol.CAMERA:select the camera channel which is connected with the speed dome.ID:Assign an ID to your speed dome

MISCELLANEOUS SETUPCHANGE PASSWORDSET TIMEHIDDEN CHANNEL [1]AUDIO PORT SETUPPTZ SETUPIMAGE PARAMETERS [CH1]PASSWORD ENABLE [OFF]KEYPAD TONES [ON]VGA SETUP [1024*768 60HZ]


MISCELLANEOUS SETUP

CON 64%BRI 64%HUE 64%SAT 64%

( )MOVE ( )- ( )+ (MENU)EXIT

Press [SEL] to select the camera,press [ ] and [ ] buttons to assign the ID.Note:the ID must be unique.

5.17 Miscellaneous Setup –

Image Parameters

13

You can adjust the image parameters according to your needs.

Move the cursor to this selection and press [◄◄] and [►►] button to select a channel you want to adjust,then press [SEL] button to edit parameters.

CON:ContrastBRI:BrightnessHUE:HueSAT:SaturationPress [▲] or [▼] to select the item.and then press [ ] and [ ] buttons to adjust the value.





5.18 Miscellaneous Setup – Password Enable

User Manual

The password will be required to control the DVR when this option is set to “ON”,and the password is not required when this option is set to “OFF”.

5.19 Miscellaneous Setup – Keypad Tones

This function allows you to enable/disable buzzer sound when pressing a button.Press [SEL] to select ON or OFF.



5.20 Miscellaneous Setup – VGA Setup

Select a VGA resolution to match your CRT or LCD monitor.NOTE:VGA video output is an optional function and may not be available on all models.

NETWORK SETUPMAC ADDRESS <00:11:22:33:23:35>IP ALLOCATION [STATIC]IP ADDRESS [192.168.1.100]SUBNET MASK [255.255.255.0]GATEWAY [192.168.1.1]DNS1 ADDRESS [0.0.0.0]DNS2 ADDRESS [0.0.0.0]HTTP PORT [ 80]USER SETUPDDNS SETUP (HTTP PORT)80,1024-49151( )MOVE (SEL)SELECT (MENU)EXIT




5.21 Network Setup

User Manual

MAC ADDRESS:In a local area network(LAN),the MAC (Media Access Control) address is your computer’s unique hardware identity code(On an Ethernet LAN,it is the same as your Ethernet address).When you are connected to the Internet from your computer(or host as the Internet protocol thinks of it),a corresponding table relates your IP address to your computer’s physical(MAC)address on the LAN. (IMPORTANT:This setting should only be changed if multiple DVRs are being setup on the same network and the first code“00” must not to be changed. )

IP ALLOCATION: DVR supports DHCP and Static IP modes.If your modem/router supports DHCP function,you can use DHCP mode.When using STATIC mode,you will be required to setup your IP settings manually.Note:After setting the DVR to DHCP mode restart the unit.

IP ADDRESS:In a local network,the IP address is a unique designated address for your DVR recognized by your router.Ensure this number is within the range usable by your modem/router.Use the [▲] and [▼] buttons to move the cursor and use the [SEL] button to change the numbers.Once you have finished the changes restart your DVR.

SUBNET MASK:Subnet Mask is used to determine what subnet an IP address belongs to.A number that is used to identify a sub network so that IP addresses can be recognized on a local area network.Consult your modem/router for your LAN’s subnet mask.

15




USER SETUPADMIN ID [admin]ADMIN PASSWORD [admin]USER ID [ ]USER PASSWORD [ ]


User Manual

GATEWAY：Set this number to the gateway set by your modem/router.

NOTE:To adjust the IP ADDRESS,SUBNET MASK and GATWAY value,only when the [STATIC] mode is being selected.

DNS ADDRESS：This code should be provided by your local ISP.

HTTP PORT：This port number is used to communicate with PC Client.The default value is 80(Can be changed from 1024 to 49151).

USER SETUP:When accessing the DVR from a remote location you will be prompted for a login and password.The default is “admin” for full administrator rights.Set“User ID” and password to setup a user with limited rights to prevent tampering.

DDNS SETUPDDNS PROVIDER [WWW.DynDNS.com]DDNS USER NAME [ ]DDNS PASSWORD [ ]DDNS DOMAIN [ ]


MAIN MENUCAMERA SETUPRECORD SETUP

RECORD FRAMERATE VIDEO QUALITY NORMAL RECORD SCHEDULE HARD DRIVE SETUP MISCELOLANEOUS SETUP NETWORK SETUP LANGUAGE ENGLISH VIDEO BACKUP RESET MENU( )MOVE (SEL)SELECT (MENU)EXIT

User Manual

DDNS SETUP：If you require an external service to maintain a dynamic IP address enter the user information here.

5.22 LanguageYou can change the OSD language from the default English to other languages,if your DVR supports multi-languages.

This function is only available for the model which supports USB memory stick

device.If your DVR is with PC-link USB interface,please refer Charter 8 for video backup.

backup。EVENT LIST

00003 T 2008/08/22 19:42:25 00002 T 2008/08/22 17:30:19 00001 T 2008/08/22 16:20:22 00000 T 2008/08/21 17:12:43

Move the cursor to “VIEW EVENTS”,press [SEL] to enter event list.Press [▲] or [▼] button to move the cursor,and then press [SEL] to select the event you like to backup and return to previous menu.

17

5.23 Video Backup(For Optional USB Memory Stick Backup)

VIDEO BACKUP

VIEW EVENTSSTART: 2008/02/22 19:32:25END: 2008/02/22 19:36:25SIZE: [197]MB

FILE NAME: [VIDOOO.MCG] BACKUP TO CD/DVD BACKUP TO USE DEVICE

( ) MOVE (SEL) SELECT (MENU) EXIT

BACKUP STARTING TIME

2008/02/22 19:32:25


BACKUP FILE NAME

012345( )CHANGE ( )MOVE (SEL)SELECT

(CH)NUMBER ( )DELETE ( )INSERT (MENU)EXIT

VIDEO BACKUP

VIEW EVENTSSTART: 2008/02/22 19:32:25END: 2008/02/22 19:36:25SIZE: [197]MB

FILE NAME: [VIDOOO.MCG] BACKUP TO CD/DVD BACKUP TO USB DEVICE


User Manual

The DVR system already indicated the start & end time of the recording event. Move the cursor to “SIZE”,DVR will automatically indicate the size of the video you like to backup to USB memory stick.

You can directly select the start & end time of a recording video to backup. Move the cursor to “START” or “END”;press [SEL] to enter the interface.Press [◄◄] or [►►] button to move the cursor,and then press [SEL] to modify the value.Press [MENU] back to previous menu。

You can rename the backup file.Press [◄◄] or [►►] button to select the character you want to modify,press [▲] or [▼] button to select a character from the given character list, and then press [SEL] to enter.Please note that the name must be ended with “. MCG”。

Insert your USB memory stick device into DVR’s USB port.Move the cursor to “BACKUP TO USB DEVICE”，press [SEL] button. Note: If DVR has CD-RW, in this may select the video recording

document engraves records to CD inside.

18

BACKUP TO USB DEVICES

Check USB devices

(MENU) EXIT

User Manual

DVR will check your USB device as left picture showed and then start to copy the backup file.

Please read Charter 8 on how to play back your backup file.。5.24 Reset Menu If you select this item,the system will restore all your settings to

factory default values.Your need to enter your password to reset the menu.

5.25 NTSC/PAL Output select

Change the jumper JS1 to select NTSC or PAL video output format according to the silkscreen on the PCB.

6.1 Start Recording

Chapter 6:Record

User Manual

Press [●REC] record button to start recording according to the record schedule you have set .System will display some information on screen.

[●]：The red pot next to the channel name indicates that the

channel is being recorded.[A-REC]：indicates the current record schedule is set to NORMAL-RECORD mode.[S-REC]：indicates the current record schedule is set to SENSOR-RECORD mode.[N-REC]：indicates the current record schedule is set to NO-RECORD mode.[39%]：indicates the percentage of hard disk space used.[M]：Hdd info([M]Master Hard Disk,[S] Slave Hard Disk).6.2 Audio Recording

[ ]：indicates this video channel is bundled with an audio port, and the audio output is on.

[ ]：indicates the audio output is off.[ ]：indicates the audio is being recorded and the audio output is on. For 4 - channel,you could press [DOWN] button on front panel to be mute mode for audio output.The audio input can be still recorded while the output is mute.And You coulde press [UP] button to switch one of the two audio inputs

to live output.For 9 – channel,you could press [MUTE] button on front panel to be mute mode for audio output .The audio input can be still recorded while the output is mute.

20

6.3 Stop Recording

User Manual

Press [■STOP] button will stop recording. If password protection function is

enabled,system will prompt you to input password.Only correct password can stop

recording process.

6.4 Estimated Recording Length

Estimated record time based on 160GB HDDStandard

NTSC

Standard

PAL

QualityHighestHighNormalLower

QualityHighestHighNormalLower

60fps6288

107120

50fps6490

110123

48fps78110134150

36fps89

125153171

32fps116165201225

24fps133188229256

21

16fps232330401450

12fps267375458513

1fps3720528064207200

1fps3200450055006150

Unit:Hour

SEARCH VIDEODISK:MASTER SLAVE [NONE]08/09/19 11:16:31–08/09/19 15:05:48TYPE:EVENT TIMEPLAY:EVENTS

00006 T 2008/09/19 15:07:4000006 T 2008/09/19 14:07:4000006 T 2008/09/19 13:07:4000006 T 2008/09/19 12:07:4000006 T 2008/09/19 11:07:40 00006 T 2008/09/19 10:07:4000006 T 2008/09/19 09:07:40

( )MOVE (SEL)SELECT ( )PLAY (MENU)PREV MENU

SEARCH VIDEODISK:MASTER SLAVE [NONE]08/09/19 11:16:31–08/09/19 15:05:48TYPE:EVENT TIMEPLAY:00006 T 2008/09/19 09:07:40

( )MOVE (SEL)SELECT ( ► )PLAY (MENU)PREV MENU

7.1 Playback Control

Chapter 7: Playback

User Manual

Press the [►] PLAY button goes into PLAYBACK mode.The newest record event will be played.

Press the [MENU] button during

PLAYBACK mode.then the system will list

all the recorded events. The latest record

will be on top of the list.

Press the [▲] or [▼] button to selecte the

event and then press [►] to play the event.

►

Another way to search video is directly inpout time period. Press the [MENU] button then use [▲] or [▼] button to select the TIME search mode. Use [SEL] edit time value,press [►] to play the video.If the time you selected has no record event,it will indicates “NO EVENTS” on the screen when you press [►].

22

User Manual

Chapter 8: USB Progamming(Optional)

8.1 Driver Installation:

8.2 Program Interface

Button functions：

(1) Insert driver CD in your CD-ROM drive。(2) Open CD directory.(3) Double click on the install applications.(4) Run “Install” program.(5) Follow the setup wizard to finish the installation.

1

2

20

3

45 6

78 9

10 11 12 13 14 15 16 17 18 19 20

23

1.PTZ Control

2.Zoom in,Zoom Out

3.HDD Play Mode

4.File Play mode

5.NET Play mode

6.Event List

7.Control Panel

8.Remote DVR Control

9.Change Storage Device

10.Capture Image

8.3 Program Running8.3.1 HDD play mode

11.11.Convert Streams to AVI file

12.Back One Frame

13.Record

14.Stop

15.Play

16.Pause

17.Fast Forward

18.Forward One Frame

19.Playback Slider

20.Audio Slider

User Manual

System will detect the HDD automatically when you connect the USB cable to your PC.An USB icon“ ”will appear in the system tray (right bottom corner of the screen.)After you’ve seen the USB icon,double click “ ”icon on your

desktop to run the program.Note:if you do not follow above steps, the program will fail to detect

HDDPress “ ” to open the video event lists.

User Manual

Press“ ” to configure the program local settings

Press“ ” to play video.

8.3.2 FILE play mode(only when you plug a USB Memory Stick into your PC)

Press“ ”to open a folder and select the file you want play.

25

8.3.3 NET play mode

User Manual

Press “This mode allows you to remote control your DVR via Internet or intranet.

” to pop up the login window.

Fill in Host Name,Host Port,User Name and Password of the DVR that you want remotely access and then press Login to enter the main page.。

8.4 IE Remote connects to DVRInputs long-distance DVR in the IE browser the IP address or the domain name

(If the port number is not 80，please add on the port number Behind the IP address or the domain name. For instance:192.168.1.100:20000),This time will spring to land the main page, the following chart will show:

26

User Manual

Note：If is first time access DVR，Please allow to install the IE plug-in unit

（The concrete method is：Open IE browser and at “Tools”“Internet Option”“Security” “from definition rank” in safe establishment, All related installs plug-in unit's option to establish for “begins using”)Inputs long-distance DVR the IP address, the port number, the user name as well as the password carries on the debarkation. After landing successful , only then carries on the

corresponding operation.。Press

“

”Button，Springs the following dialog box:

The input assigns the time carries on the video recording file search，Presse the “OK” key to carry on the broadcast again.

Note: This function only active when through the IE visit .According to “ ” the button opens or the shutting down long-distance DVR connection. 27

Items

Video standard

Video Input/Output

Audio Input/Output

Monitoring

User Manual

Chapter 9: Specification

Descriptions

NTSC/PAL

4 channel：4 input/2 output，9 channel：9 input/1 output

4 channel：1 input/1 output，9 channel：1 input/1 output

Resolution: NTSC：720X480@30fps(each Ch)PAL：720X576@25fps(each Ch)

Features Full-D1，1-CH/4-CH/9-CH Display

Resolution:

NTSC：720X240@60fps(Total)

Recording Features

Quality

PAL：720X288@50fps(Total)Variable Frame Rate/Variable QL per Channel

4-Level(Highest,High,Normal,Low)

Audio

Video

Motion Detection

Microprocessor

Network Interface

HDD Port

IE

PTZ

USB Interface

VGA Output

Remote control

ADPCM2 CODEC

MPEG4

Settable Window/Level

32-bit RISC Processor

TCP/IP(RJ45)

IDE & SATA

OK

RS- 485

USB2.0（Optional）Optional

IR remote control

4 / 9-Channel DVR

10.1 System connection diagram

Chapter 10:Appendix

User Manual

Camera

LAN(RJ-45)

10.2 Accessories

Sensor

USB

DVR

TV /Monitor

Alarm

VCR

PC(Optional)

Power Cord

Software CD

Power Adaptor

Remote Controller

29

User’s Manual

USB Cable(For PC backup Only

中录

中文目录安全注意事项.............................................................................................................................................3第 1 章：DVR 特性….....…...................................................................................................................4

DVR 特性 .........................................................................................................................................4第 2 章：外观...........................................................................................................................................52.1 前面板........................................................................................................................................52.2 后面板........................................................................................................................................62.3 遥控器........................................................................................................................................7

第 3 章：安装 DVR................................................................................................................................83.1 安装硬盘....................................................................................................................................83.2 连接摄像机和监视器................................................................................................................83.3 VGA 输出.................................................................................................................................83.4 连接电源....................................................................................................................................8

第 4 章：DVR 启动................................................................................................................................94.1 软件版本信息............................................................................................................................94.2 检测硬盘....................................................................................................................................94.3 格式化硬盘................................................................................................................................9第 5 章：DVR 菜单..............................................................................................................................105.1 浏览菜单..................................................................................................................................105.2 菜单预览..................................................................................................................................105.3 通道设定..................................................................................................................................115.4 录像设定..................................................................................................................................115.5 录像帧数..................................................................................................................................115.6 录像品质..................................................................................................................................125.7 录像预约..................................................................................................................................125.8 报警设定..................................................................................................................................125.9 传感器设定..............................................................................................................................135.10 移动侦测设定........................................................................................................................135.11 硬盘设定................................................................................................................................145.12 系统设定 - 密码设定............................................................................................................145.13 系统设定 - 时间设定............................................................................................................155.14 系统设定 - 通道开关............................................................................................................155.15 系统设定 - 音频设定............................................................................................................155.16 系统设定 - PTZ 设定.............................................................................................................165.17 系统设定 - 颜色设定............................................................................................................165.18 系统设定 - 密码开关........................................................ ...................................................175.19 系统设定 - 按键声音............................................................................................................17 5.20 系统设定 - VGA 设定...........................................................................................................175.21 网络设定..................................................................................................................................185.22 语言选择..................................................................................................................................205.23 录像备份..................................................................................................................................205.24 菜单重设..................................................................................................................................225.25 系统制式选择 ........................................................................................................................22

第 6 章：录像.........................................................................................................................................23

1

6.1 开始录像....................................................................................................................................236.2 音频录制....................................................................................................................................236.3 停止录像....................................................................................................................................246.4 预估录像时间............................................................................................................................24第 7 章：回放.........................................................................................................................................257.1 回放录像..................................................................................................................................25

第 8 章：客户端程序............................................................................................................................268.1 安装客户端程序........................................................................................................................268.2 程序界面..................................................................................................................................268.3 工作模式..................................................................................................................................278.4 IE 远程访问DVR....................................................................................................................29第 9 章：技术规格.................................................................................................................................31

第 10 章：附录.......................................................................................................................................3210.1 系统连接示意图 .....................................................................................................................3210.2 随机附件 .................................................................................................................................32

2

安全注意事项使用手册

注意以下安全预防措施，避免人身伤害及预防对于这个产品或所有连接到它的产品的损坏。1. 使用合适的电源;

不要用比指定的电压(100~240 VAC)更高的电压来运行这个产品。2. 不能把金属物插入 DVR 中不要在 DVR 盒中插入物体，以免导致触电;3. 请不要放在潮湿或多灰尘的地方;避免把本产品放在像潮湿的地下室或多灰尘的地方。4. 请勿让此产品暴露在雨水中或潮湿的环境下;如果无意中有水进入，请拔掉电源并立即与当地的经销商联系。5. 保持产品表面的清洁和干燥;

在断电的情况下用布沾少量的水清洗 DVR 的外壳(没有溶剂)。6. 产品独有的通风设置;

DVR 中配有风扇，可以给机器适当地通风。7. 如果有可疑的故障，请停止操作;

如果有来自 DVR 的任何异常的声音或气味，立刻拔去电源插头并与授权经销商或服务中心联系。8. 不要试图拆除顶盖;

警告：不要拆除 DVR 顶盖，以免触电.9. 小心轻放;

如果不小心把 DVR 碰到坚硬的物体上，导致 DVR 不能正常工作，请联系授权经销商修理或更换。10. 请使用标准锂电池（注：制造商预装电池）;

断电源后，如果系统时钟不能继续工作，请更换位于主板上的标准 3V 锂电池。警告：更换电池前务必关掉 DVR，否则你可能会受到严重的电击。请妥善处理弃置的旧电池。

11. 请将产品放置在通风良好的环境，这个 DVR 系统包含一个硬盘驱动器，它在运行的过程中会产生大量的热量，因此，在运行时不要遮挡住为系统降温的通风孔（包括顶部、底部、两边和背面），将产品安装或放置在通风良好的地方。

3

DVR 特性MPEG4 压缩;

第 1 章： DVR 特性使用手册

4 通道 DVR： 4 路视频输入- 2 路视频输出；4 通道 DVR： 1 路音频输入- 1 路音频输出；9 通道 DVR： 9 路视频输入- 1 路视频输出；9 通道 DVR： 1 路音频输入- 1 路音频输出；

图像质量好，高清晰度； NTSC/PAL 制式可调；采用 SOC 单芯片，高稳定度； Linux 操作系统，网传效果好；多种录像模式：连续、移动侦测、传感器触发、时间进程录像；支持事件列表和精确时间搜索回放；支持通道隐藏和轮循显示；视频信号丢失报警功能；可选配 VGA 视频输出，方便接入 PC 显示器；内置 RS-485 端口，支持云台控制；密码保护功能；带红外遥控；支持硬盘容量大于 500G；支持 USB 接口（可选）；

4

2.1 前面板第 2 章：外观

使用手册

2.1.1 4 通道 DVR 前面板(仅供参考，以实物为准)

1. SEARCH：录像查询2. MUTE：静音开关3. REC：录像4. PLAY：播放5. UP：向上 6. DOWN：向下 7. REW：快退播放 8. FWD：快进播放 9. CH-：切换到前一通道10. 电源指示灯

11. 硬盘指示灯12. CH+：切换到后一通道13. MENU/ESC/LEFT：菜单/退出/向左14. SEL/EDIT/RIGHT：选择/编辑/向右15. PTZ：云台控制16. STOP：停止17. PAUSE：暂停18. ALL：预览所有画面19. 红外线接收窗口

2.1.2 9 通道 DVR 前面板(仅供参考，以实物为准)

1. SEARCH：录像查询2. MUTE：静音开关

3. REC：录像4. PLAY：播放

5

5. UP：向上6. DOWN：向下7. REW：快退播放

13. MENU/ESC/LEFT：菜单/退出/向左14. SEL/EDIT/RIGHT：选择/编辑/向右15. PTZ：云台控制

使用手册

8. FWD：快进播放9. CH-：切换到前一通道10. 电源指示灯11. 硬盘指示灯12. CH+：切换到后一通道

2.2 后面板

16. STOP：停止17. PAUSE：暂停18. ALL：预览所有画面19. 红外线接收窗口

2.2.1 4 通道 DVR 后面板(仅供参考，以实物为准)

1. 风扇2. 音频输出3. 音频输入4. 视频输出5. CH2：视频输入 2 6. CH1：视频输入 17. VGA 输出（可选）

8. USB 接口（可选）9. LAN：网络接口10. CH4：视频输入 4 11. CH3：视频输入 3 12. RS485/SENSOR/ALARM：485/传感器/报警器接口13. 电源接口

2.2.2 9 通道 DVR 后面板(仅供参考，以实物为准)6

2. 音频输入

1. 风扇3. 视频输出 2．音频输入

12. CH9：视频输入 9使用手册

4. CH4：视频输入 4 5. CH3：视频输入 3 6. CH2：视频输入 27. CH1：视频输入 1 8. VGA 输出 (可选) 9. USB 接口（可选）10. LAN：网络接口11.音频输出2.3 遥控器

13. CH8：视频输入 8 14. CH7：视频输入 7 15. CH6：视频输入 616. CH5：视频输入 5 17. RS485/SENSOR/ALARM：485/

传感器/报警器接口18. 电源接口

(仅供参考，以实物为准)

1-90

ALL

通道选择数字键查看所有画面

Menu 进入/退出菜单▲

▼

SEL

●

■

向上键向下键选择键快退键播放键快进键录像键暂停键停止键

SEA/A 录像检索/音频通道现场输出切换键Mute 静音键

7

3.1 安装硬盘第 3 章：安装 DVR

使用手册

注意：请不要在 DVR 运行时取出硬盘；请把硬盘设置为主盘。(1) 打开 DVR 上盖。(2) 连接硬盘数据线和电源线到主板上。(3) 装好上盖。3.2 连接摄像机和监视器用 BNC 线把摄像机的信号连接到 DVR 的视频输入端，把 DVR 的视频输出信号连接到监视器上去（请参考 2.2 节的后面板示意图)。3.3 VGA 输出用 VGA 输出端口连接到显示器(可选)。3.4 连接电源请用随机附带的电源连接 DVR。

8

4.1 软件版本信息第 4 章： DVR 启动

使用手册

V2.0V-EN-BG

2008.XX.XX

4.2 检测硬盘

硬盘检测中…… 主硬盘 [WDC WD3200AAJB-00T]从硬盘……

4.3 格式化硬盘

硬盘检测中…… 主硬盘 [WDC WD3200AAJB-00T]–新硬盘- 确认硬盘格式化(SEL)格式化 / (MENU) 退出?

连接好电源并开机后，DVR 会显示当前的软件版本和软件版本的发布日期。

在 DVR 启动时，它会自动检测到所安装的硬盘，并把硬盘的相关信息显示出来。

当 DVR 检测到一个新硬盘时，它会自动提示“在录像前，请格式化硬盘”。按[SEL]键执行格式化操作，或按

[MENU]键取消格式化，进入系统。

9

5.1 浏览菜单第 5 章： DVR 菜单

使用手册

通道设定录像设定录像帧数录像品质录像预约报警设定硬盘设定系统设定网络设定语言选择录像备份菜单重设

主菜单

中

中文

当 DVR 启动完后，按[MENU]键进入系统主菜单。[MENU]: 进入菜单。[▲，▼，◄◄ , ►►]: 移动光标。[SEL]: 选择/修改设置。[MENU]: 再次按下菜单键可退出菜单或

进入上一级菜单。

( )移动 (SEL)选择 (MENU)退出

5.2 菜单预览通道设定录像设定录像帧数录像品质录像预约报警设定主菜单硬盘设定系统设定网络设定语言选择录像备份菜单重设

菜单目录

密码设定时间设定通道开关音频设定PTZ 设定颜色设定密码开关按键声音VGA 设定

注意：当 DVR 不支持某些功能时，在菜单中就不会有相应的选项出现，比如：如果 DVR 没有带 VGA 接口，则在菜单里就不会有“VGA 设定”这一项。

10

5.3 通道设定1 开 2 开通道设定

3 开 4 开


使用手册在通道设定里，可以打开或关闭某一通道的图像显示。按[▲，▼，◄◄ , ►►]键来选定

某个通道，然后按 [SEL]键来设定该通道为“开”或“关”。

注意：如果某个通道在“通道设定”里设为“关”，那么该通道就无法录像，也不能设置帧率。5.4 录像设定

1 开 2 无设备录像设定

3 开 4 开


5.5 录像帧数1 3帧 2 5帧录像帧数最高 36帧

3 25 帧 4 3帧

( )移动 (SEL)+ ( ■ )- (MENU)退出

在录像设定里，可以设置某一通道是否可以录像。按[▲，▼，◄◄ ，►►]键来选定某个通道，然后按 [SEL]键来设定该通道为“开”或“关”。如果在“通道设定”里把某个通道设为“关”，则该通道不会被录像，同时在屏幕上显示为“无设备”。

录像总资源为 50 帧（PAL）或 60 帧（NTSC），可以根据实际情况的需要而灵活地为每个通道设定录像帧数。

按[▲，▼，◄◄，►►]键来选定一个通道，然后按[SEL]键来增加值，或按[■STOP]键来减少值。

11

使用手册注意：帧率越高，录像时所占用的硬盘空间就越大，录像回放时就越流畅。5.6 录像品质

通道设定录像设定录像帧数录像品质录像预约报警设定硬盘设定系统设定网络设定语言选择录像备份菜单重设

主菜单

中

中文

有最高/高/中/低四种录像品质级别可选。录像的品质设得越高，录像的质量就越好，所占用的硬盘空间就越多。


5.7 录像预约录像预约可以灵活地设置每一个时间段的录像方式。

上午录像预约

下午时间段是总共 24 小时。按[▲，▼，◄◄，►►]键来选择

0… 3… 6… 9… 0… 3…. 6… 9…

无录像正常录像S 报警录像


时间段，再按[SEL]键来选择录像方式。

无录像[ ]： DVR 在此时间段内不录像。正常录像[ ]： DVR 在此时间段内将持续录像。报警录像[ S ]：在此时间段内，如果 DVR 检测到有位移或报警事件发生，则 DVR 就启动录像.注意：在设置好录像计划后，必须按[DVR 也不会按录像计划来进行录像。5.8 报警设定

REC]键来启动录像计划。否则，

报警录像时间: 当报警后，录像要报警设定报警录像时间 30 报警时间关

传感器设定报警布防


持续的时间。报警时间: 当有报警事件触发时，蜂鸣器的报警时间和是否报警。

12

连续：蜂鸣器一直发声，直到有键被按下。关：蜂鸣器不发声。注意：报警录像时间和报警时间都是以秒为单位。5.9 传感器设定

使用手册

注意：随机并不包含外接传感器和报警器，如果需要，请自己购买。传感器设定

DVR 支持常开和常闭两种类型的通道 -1 常开通道 -2 无设定通道 -3 无设定通道 -4 无设定


外接传感器。请根据你所使用的传感器类型在 DVR 里正确设定。

入。注意：4 路 DVR 支持 4 路外接报警输入；9 路 DVR 支持 8 路外接报警输5.10 移动侦测设定

在这里，可以对每个通道的移动侦测参数进行设定。报警布防

通道 1 开级别 1 布防通道 2 开级别 2 布防通道 3 开级别 3 布防通道 4 开级别 1 布防


开/关: 打开或关闭移动侦测功能。级别: 移动侦测检测的灵敏度，有

1/2/3 三个级别（1 为最低，3 为最高）。布防: 设置移动侦测区域

布防：按[▲，▼，◄◄，►►]键来选择某个区域块，然后按 [SEL]键来进行设定（透明表示打开了移动侦测功能；深灰色表示禁止了移动侦测功能）。

13

按“Stop”键来清除所有的区域，按“All”键来选中所有的区域。5.11 硬盘设定

使用手册

硬盘设定硬盘重写 [ 开]ST3160215A 主硬盘容量 160133MB 主硬盘用量 124931MB 78% 主硬盘格式化从硬盘容量 N/A 从硬盘用量 N/A 从硬盘格式化


硬盘重写：开: 当硬盘录满时，DVR 会继续录像并覆盖以前的录像资料关: 当硬盘录满时，DVR 会自动停止录像。

硬盘容量：安装在 DVR 上硬盘的容量大小。硬盘用量：录像文件已经占用的硬盘容量大小。硬盘格式化：把硬盘格式化为 DVR 可读写的格式。注意：在执行格式化操作时，DVR 提示输入密码，缺省密码是 “111111”。5.12 系统设定 - 密码设定

密码设定时间设定通道开关音频设定PTZ设定颜色设定密码开关按键声音VGA设定

系统设定

[ 4 ][ CH4 ][ 关][ 开 ][800*600 60HZ]

可以给 DVR 系统设置密码，以防止非法操作 DVR。密码由六个按键组成，除了[MENU]键外，所有按键都可以作为密码输入。


首先输入当前密码，然后输入新密码，最后再输入一次新密码。旧密码 [-----]新密码 [-----]确认密码 [-----] 如果忘记了密码，请与我公司的技术支持联系。

14

5.13 系统设定 - 时间设定时间设定

2008/11/11 17:50:01


5.14 系统设定 - 通道开关系统设定

密码设定时间设定

使用手册

系统时间格式为：年/月/日和小时：分钟：秒。按[◄◄]或[►►]键来移动光标，按

[SEL] 键来更改值，按[MENU]键保存并返回上一级菜单。

DVR 支持在预览模式下的通道隐藏功能，如果某通道被隐藏了，在预览模式通道开关音频设定PTZ设定颜色设定密码开关按键声音VGA设定

[ 4 ][ CH4 ][ 关 ][ 开 ]800*600 60HZ

下是无法看到该通道的图像，但并不影响该通道的录像。按[SEL]键来选择所想要隐藏的通道。


5.15 系统设定 - 音频设定音频设定音频通道-视频通道:把音频输入与音频通道 1-视频通道音频通道 1-录像音频通道 2-视频通道音频通道 2-录像

[ 1][ 关][ 2][ 开]

视频输入捆绑在一起。音频通道-录像:打开或关闭音频的

录制。( )移动 (SEL)选择 (MENU)退出

注意：4 路 DVR 支持 1 路音频输入，9 路 DVR 只支持 1 路音频输入。

15

5.16 系统设定 - PTZ 设定PTZ 设定

波特率 [4800] 协议 [PELCO-D] 通道- [ 1 ] 地址- [ 1 ]

( )移动 ( )通道地址(SEL)选择 (MENU)退出

使用手册

波特率: 支持 4800，9600，19200，38400 四种波特率。(注:此主机2400波特率下和少许解码器不兼容,请不要选此波特率和其他设备通信)。协议: 支持 PELCO-D 和 PELCO-P。通道: 选择连接了云台或高速球所

在的通道。地址: 根据云台或高速球的地址来

设定。按[SEL]键来选择通道，按[ ]和[ ]键来设定地址。5.17 系统设定 - 颜色设定

密码设定时间设定通道开关音频设定PTZ 设定颜色设定密码开关按键声音VGA 设定

系统设定

[ 4 ]

[ CH4 ][ 关 ][ 开][800*600 60HZ]

根据实际需要来设置每个通道的颜色参数。按[◄◄]或[►►]键来选择想要修改的通道，按[SEL] 键进入修改画面更改参数。


通道 1对比度： 64%

亮度： 64%

色度： 64%

饱和度： 64% ( )移动 ( )- （）+ (MENU)退出或[

16

对比度：调整图像的对比度。亮度：调整图像的亮度。色度：调整图像的色度。饱和度：调整图像的饱和度。按[▲]或[▼]键来选择项目，按[ ]

]键来调整参数值。

5.18 系统设定 - 密码开关系统设定


使用手册

当把密码开关打开时，对 DVR 的任何操作都需要输入正确的密码，否则

通道开关音频设定PTZ 设定颜色设定密码开关按键声音VGA 设定

[ 4 ][ CH4 ][ 关 ][ 关 ]800*600 60HZ

无法进入系统；当把密码开关关闭时，对 DVR 的操作都不需要输入密码（格式化硬盘、菜单重设、客户端访问除


5.19 系统设定 - 按键声音系统设定

密码设定

外）。

设置在按键时是否让蜂鸣器发出声音，按[SEL]键来打开或关闭此功能。

通道开关音频设定PTZ 设定颜色设定密码开关按键声音VGA 设定

[ 4 ][ CH4 ][ 关 ][ 关 ]800*600 60HZ

注意: 本功能是可选的，并非所有DVR 都支持此功能。


5.20 系统设定 - VGA 设定系统设定


根据实际所连接到 DVR 上的 CRT

或 LCD 的实际情况来选择 VGA 分辨率，通道开关音频设定PTZ 设定颜色设定密码开关按键声音VGA 设定

[ 4 ][ CH4 ][ 关 ][ 关 ]800*600 60HZ

以达到最佳显示效果。注意: VGA 输出口是可选配的，并不是所有产品在出厂时都带有。


17

5.21 网络设定网络设定

MAC 地址<00:11:22:33:44:55>

IP 类型 [STATIC]IP 地址 [192.168.1.100]子网掩码 [255.255.255.0]网关 [192.168.1.1]DNS1 地址 [0.0.0.0]DNS2 地址 [0.0.0.0]HTTP 端口 [ 80]用户设定DDNS 设定 (HTTP PORT) 80， 1024-49151( )移动 (SEL)选择 (MENU)退出

网络设定

使用手册MAC 地址: DVR 网络接口的

物理地址。注意: MAC 地址可以根据需要而随意更改，但必须是以“00”开头的；同时，当在同一局域网里有两台

DVR 时，必须更改其中一台 DVR 的MAC 地址。

IP 类型 :DVR支持DHCP和MAC 地址IP 类型IP 地址子网掩码网关DNS1 地址DNS2 地址HTTP 端口用户设定DDNS 设定

<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]

STATIC 两种 IP 设置方式。如果启用DHCP，则在局域网中必须有 DHCP服务器，否则，DVR 无法获取到 IP地址；如果使用 STATIC IP，必须手动设置 IP 地址。

(HTTP PORT) 80， 1024-49151 ( )移动 (SEL)选择 (MENU)退出

网络设定 IP 地址: 根据DVR所在网络的MAC 地址IP 类型IP 地址子网掩码网关DNS1 地址DNS2 地址HTTP 端口用户设定DDNS 设定

<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]

实际情况设置 DVR 的 IP 地址。在设置前，请咨询相关网络管理员。

(HTTP PORT) 80， 1024-49151( )移动 (SEL)选择 (MENU)退出

网络设定MAC 地址

<00:11:22:33:44:55>IP 类型 [STATIC]IP 地址 [192.168.1.100]子网掩码 [255.255.255.0]网关 [192.168.1.1]DNS1 地址 [0.0.0.0]DNS2 地址 [0.0.0.0]HTTP 端口 [ 80]用户设定DDNS 设定


子网掩码：用来决定 DVR 的 IP 地址属于哪一个网段。在设置前，请咨询相关网络管理员。 18

MAC 地址IP 类型IP 地址子网掩码网关DNS1 地址DNS2 地址HTTP 端口用户设定DDNS 设定

网络设定<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]

使用手册网关：在设置前，请咨询相关网络管理员。


注意：只有在 IP 类型为 STATIC 时，才需要手动设置 IP 地址，子网掩码，网关。MAC 地址IP 类型IP 地址子网掩码网关DNS1 地址DNS2 地址HTTP 端口用户设定DDNS 设定

网络设定<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]

DNS 地址：域名解析服务器地址，请咨询相关网络管理员。


网络设定MAC 地址

<00:11:22:33:44:55>IP 类型 [STATIC]IP 地址 [192.168.1.100]子网掩码 [255.255.255.0]网关 [192.168.1.1]DNS1 地址 [0.0.0.0]DNS2 地址 [0.0.0.0]HTTP 端口 [ 80]用户设定DDNS 设定


用户设定高级用户名 [admin] 高级用户密码 [admin] 用户名 [ ]

HTTP 端口：WEB 访问时使用的协议端口，默认的是 80(可以修改的范围是1024 到 49151)

用户设定：DVR 提供两种权限的使用者，一是“admin”，二是“user”。前者访问时具有所有的权限，后者访问

用户密码 [ ] 时只有图像预览的权限。

( )移动 (SEL)选择 (MENU)退出19

DDNS 设定使用手册

DDNS 设定：动态域名解析服务，必须先到 DVR 所支持的 DDNS ISP 服DDNS 服务器DDNS 用户名DDNS 密码DDNS 域名

[WWW.DynDns.com ] [ ] [ ] [ ]

务商那里去注册域名。


5.22 语言选择主菜单通道设定录像设定录像帧率录像品质中录像预约报警设定硬盘设定系统设定网络设定语言选择中文录像备份菜单重设


5.23 录像备份

如果 DVR 支持多语言显示功能，那么就可以在多语言间切换菜单显示。

此功能只支持 U 盘或光盘备份功能的 DVR，如果 DVR 只支持通过电脑的USB 接口来备份图像，其具体操作请参考第 8 章。

事件列表00003 T 2008/08/22 19:42:25 00002 T 2008/08/22 17:30:19 00001 T 2008/08/22 16:20:22 00000 T 2008/08/21 17:12:43

进入“录像备份”菜单，移动光标到 “选择事件”，按[SEL]键进入事件列表，按[▲]或[▼]键来移动光标，选中所要备份的事件，按 [SEL] 键来确认并返回到上一级菜单。

20

选择事件录像备份

使用手册当选定某条事件后，系统会自动计算出该文件的开始和结束时间。当把光开始: 2008/08/22 16:20:22结束: 2008/08/22 16:48:28 容量: [197] MB文件名: [VID000.MCG]备份入 CD/DVD备份入 USB设备


备份开始时间

2008/08/22 16:20:22


备份文件名VIDOOO.MCG

01234567

( )改动 ( )移动 (SEL)选择( CH )数值 ( )删除 ( )插入(MENU)退出

录像备份选择事件开始: 2008/08/22 16:20:22结束: 2008/08/22 16:48:28容量: [197] MB文件名: [VID000.MCG]备份入 CD/DVD备份入 USB设备


标移动到“容量”时，会自动显示该文件的容量大小。

也可以直接修改备份文件的 “开始”和“结束”时间。移动光标到“开始”或“结束”处，按[SEL]键进入时间设置界面（如左图所示），按[◄◄]或[►►]键来移动光标，按 [SEL]键来更改数值。

按 [MENU]键返回上一级菜单。

可以根据需要来设置备份文件的文件名。按[◄◄]或[►►]键来选择需要改的字母，按[▲]或[▼]键来从字母列表中选择所需要的字母，确定后按[SEL]键来确认。注意：备份文件的文件名的后缀必须是“. MCG”。

把 U 盘插入到 DVR 的 USB 端口，把光标移动到“备份入 USB 设备”，按[SEL]键开始备份文件。注意：如果 DVR 带有 CD-RW，在此可以把所选中的录像文件刻录到CD 里面。

21

备份入 USB 设备检测 USB 设备中。。。。。。。。可用设备（/dev/sda）可用容量（1924M）写入 USB 设备中

(MENU)退出

5.24 菜单重设

使用手册DVR 会检测 U 盘（如左图所示），检测成功后就开始往 U 盘里写文件。

如果想把 DVR 的设置恢复为出厂默认值，请执行“菜单重设”操作。在执行“菜单重设”操作时，请输入正确的密码，否则无法执行。5.25 系统制式选择

请根据主板上 JS1 的丝印来设置 DVR的视频制式（PAL 或 NTSC）。

22

6.1 开始录像第 6 章：录像

使用手册

当 DVR 处于预览状态时，按[●REC]键来开启录像功能。当然，必须在录像预约里已经设置了录像计划。一旦 DVR 处于录像状态，屏幕上会有相应的信息显示。

[●]：表示该通道正在录像。[A-REC]：表示正常录像。[S-REC]：表示报警录像。[N-REC]：表示无录像。[39%]：表示已用的硬盘空间百分比。[M]：硬盘信息 ([M]表示主盘；[S]表示从盘)。6.2 音频录制 [ ]：表示该通道与音频输入绑定了，并且有音频现场输出。

[ ]：表示该通道的音频处于静音状态。[ ]：表示该通道已开启了音频录制功能，并且有音频现场输出。对于 4 路 DVR，按前面板的[DOWN]键可以控制音频输出。如果是在录像状态下，即使被静音了，音频也同样被录制了。同样，可以按前面板的[UP]键来切换两路音频中的任何一路作为现场输出。对于 9 路 DVR，按前面板的[MUTE]键可以关闭音频输出。如果是在录像状

23

态下，即使被静音了，音频也同样被录制了。6.3 停止录像

使用手册

当 DVR 在录像状态时，按[■STOP]键来停止录像。如果打开了密码开关，只有输入了正确的密码才能停止录像。

6.4 预估录像时间使用 160GB 硬盘

制式NTSC

制式PAL

品质最高高中低

品质最高高中低

60fps6288

107120

50fps6490

110123

48fps78110134150

36fps89

125153171

32fps116165201225

24fps133188229256

24

16fps232330401450

12fps267375458513

1fps3720528064207200

1fps3200450055006150单位：小时

7.1 回放录像第 7 章：回放

使用手册

按 [►] 键进入回放模式，DVR 会自动播放最新的录像文件.

硬盘: 主硬盘

检索录像从硬盘 [无]

在回放模式下，按 [MENU] 键，DVR 就会把录像事件列表显示出来。最

08/09/19 11:16:31 - 08/09/19 15:05:48类型: 事件时间播放：事件列表

00006 T 2008/09/19 15:07:4000006 T 2008/09/19 14:07:4000006 T 2008/09/19 13:07:4000006 T 2008/09/19 12:07:4000006 T 2008/09/19 11:07:40 00006 T 2008/09/19 10:07:4000006 T 2008/09/19 09:07:40

( )移动 (SEL)选择 ( ► )播放 (MENU)上级菜单

检索录像硬盘: 主硬盘从硬盘 [无]08/09/19 11:16:31 - 08/09/19 15:05:48类型: 事件时间播放: 2008/09/19 15:07:40

( )移动 (SEL)选择( ► )播放 (MENU)上级菜单

新的录像文件排在最上面，按［▲］或[▼］来选择想要播放的文件，选中后，按 [►] 键开始播放。

另一种播放录像的方法是：按“SEARCH”键进入“检索录像”模式，在“检索录像”模式下，移动光标到“时间”处，然后按[SEL]键进入时间检索模式，按[◄◄]或[►►]键来移动光标到指定位置，再按[SEL]键来更改数值，最后按[►]键来播放录像。如果所输入的时间段没有录像文件存在，按[►]键时，则屏幕上会提示“无事件列表”。

25

第 8 章：客户端程序8.1 安装客户端程序

使用手册

8.2 程序界面按钮功能介绍：

(1) 把随机光盘放入光驱中。(2) 打开光盘。(3) 双击安装程序文件。(4) 按照提示一步一步安装程序。

1

2

45

8

6

3

7

9

10 11 12 13 14 16 15 17

26

1819 20

1.PTZ 控制区2.放大，缩小3.HDD 播放模式4.FILE 播放模式5.NET 模式6.事件列表7.客户端本地配置8.远程 DVR 设置9.切换硬盘10.抓屏幕

8.3 工作模式8.3.1 HDD 播放模式

11 备份为 AVI 文件12.快退13.远程 DVR 录像14.停止15.播放16.暂停17.快进播放18.快进19.拖拉条20.音量调节

使用手册

当用 USB 线把 DVR 连接到电脑上时，电脑会自动检测到 DVR 的硬盘。当电脑检测到 DVR 硬盘后，在电脑的右下角会出现 USB 图标“ ”，看到此图标后再点击电脑桌面上的客户端程序图标“ ”来打开客户端程序。注意：如果没有严格按照上面的步骤顺序来操作，就可能无法播放硬盘里的录像文件。

按 “ ”键来打开 DVR 硬盘里的录像事件列表

27

使用手册按“ ”键来进行客户端的本地配置，比如：抓图的保存路径以及备份为 AVI文件的路径等。

按“ ”键播放录像。

8.3.2 FILE 播放模式(播放备份到 U 盘或光盘里的录像文件)

按“ ”打开所要播放的文件，找到文件后双击它便可播放了。

28

8.3.3 NET 播放模式

使用手册

按 “在网络模式下，可以通过局域网或互联网来远程访问 DVR。”来打开远程登陆对话框，打开后，请输入所要访问的 DVR 的 IP

地址、端口号，用户名及密码，然后点“登陆”进入。

8.4 IE 远程访问 DVR在 IE 浏览器里输入远程 DVR 的 IP 地址或域名（如果端口号不是 80，请在IP 地址或域名后面加上：“端口号”，比如：192.168.1.100：20000），此时会弹出登陆主页，如下图所示：

29

使用手册

注意：如果是第一次访问 DVR，请允许安装 IE 插件（具体方法是：在 IE的“工具” “Internet 选项” “安全” “自定义级别”的安全设置里，把所有有关安装插件的选项都设置为“启用”）

输入远程 DVR 的 IP 地址、端口号、用户名以及密码进行登陆。登陆成功后方可进行相应的操作。

按“ ”按钮，弹出如下对话框：搜索时间

输入指定的时间进行录像文件搜索，再按“OK”键进行播放。注意：此功能只在通过 IE 访问时才有效。按“ ”按钮来打开或关闭远程 DVR 连接。

30

4 / 9-路 DVR

项目视频制式视频输入/输出音频输入/输出

预览

第 9 章：技术规格描述

NTSC/PAL

四路：4 输入/2 输出，九路：9 输入/1 输出四路：2 输入/1 输出，九路：1 输入/1 输出分辨率 NTSC：720X480@30fps(每通道)

PAL：720X576@25fps(每通道)

使用手册

特点 Full-D1，一画面/四画面/九画面/单通道轮循显示分辨率 NTSC：720X240@60fps(总资源)

录像特点品质

PAL：720X288@50fps(总资源)帧率可调4 级(最高，高，中，低)

音频视频移动侦测处理器网络接口硬盘接口IE 浏览器云台控制USB 接口VGA 接口红外遥控

ADPCM2 编解码MPEG4 压缩可设置区域和检测灵敏度32-bit RISC 处理器RJ45

支持 IDE 或 SATA 硬盘内置 IE 浏览器RS- 485 接口USB2.0（可选）可选支持

31

10.1 系统连接示意图第 10 章：附录

使用手册

摄像机

LAN(RJ-45)

10.2 随机附件

传感器

USB

DVR

TV (监视器)

报警器

VCR

PC(可选)

电源线

USB 驱动光碟

电源适配器

遥控器32

用户手册

USB

779 manual

Documents