7844 x - ifm · 2010 fluid sensors and diagnostic systems bus, identification and control systems...

2010

fluid sensors and diagnostic

systems

bus, identification

and control systems

position sensors

and objectrecognition

7844 xMade in Germany7844 xMade in Germany

visit our website:

www.ifm.com

We

rese

rve

the

right

to

mak

e te

chni

cal a

ltera

tions

with

out

prio

r no

tice.

04/

10

Over 70 locations worldwide – at a glance at

Singapore

ifm electronic Pte. Ltd.25, Intern. Business Park#03-104 German Center609 916 SingaporeTel. +65 / 6 / 5 62 86 61Fax +65 / 6 / 5 62 86 60E-Mail: [email protected]

www.ifm.com

ifm – the company 6 - 7

General information 8 - 9

List of articles / approvals 10 - 17

Inductive sensors 19 - 41

Capacitive sensors 43 - 51

Magnetic sensors 53 - 57

Cylinder sensors 59 - 65

Safety technology 67 - 71

Valve sensors 73 - 82

Photoelectric sensors infrared / redlight 85 - 101

Photoelectric sensors laser 103 - 108

Photoelectric sensors fibre optics 111 - 117

Photoelectric sensors specific systems 119 - 130

Object recognition 133 - 137

Encoders 139 - 142

Evaluation systems 145 - 149

Level sensors 151 - 160

Flow sensors 163 - 177

Pressure sensors 179 - 191

Temperature sensors 193 - 203

Diagnostic systems 205 - 210

Bus system AS-interface 213 - 229

Multicode reading systems 231 - 234

RF-identification systems 237 - 240

Control systems for mobile vehicles 243 - 247

Power supplies 249 - 253

Connection technology 255 - 268

ifm – worldwide: addresses 269 - 270

The company in your vicinity.

State-of-the-art communication.

With the right address – www.ifm.com – only a mouse click separates you from theworld of automation technology. See the power of our products in interactive repre-sentations. Gain an impression with 3-dimension-al views of our units. DownloadCAD drawings for direct integration in your applications. And one more innovationon the internet: The e-shop – already available in many countries. Order online – noweven faster, more convenient and reliable.

We are there for you.

Close contact with our customers is part of our success. Therefore we have consi-stently developed our sales network right from the start. Today ifm electronic isrepresented in more than 70 countries – close to you! With application advice andservice at the heart of our operation. For the introduction of new products and tech-nologies we support you with workshops and seminars in our training centres or inyour plant.

Security by success.

Since its foundation in 1969 ifm electronic has constantly grown, now having morethan 3300 employees worldwide, and achieved a turnover of EUR 340 million in2009. This success gives you the security of having a reliable partner for the imple-mentation of your automation projects. Comprehensive service and a warranty of upto 5 years on standard units are just two examples of this reliability.

1980 1990

200

100

0

300

2000

400

1970

500

sale

s de

velo

pmen

t in

mill

ion

EU

R

Turnoverdevelopmentsince 1970.

ifm – the company

6www.ifm.com

ifm – the company

7

A sign of innovation.

Not only components.

ifm stands for a large range of different sensors and systems for automation. Ourrange of more than 8000 articles guarantees flexibility and compatibility. So there isalways a reliable solution for your automation projects – from the individual sensorwith practical accessories to the complete system.

Availability guaranteed.

Your deadlines matter to us. That is why we are constantly optimising our productionprocesses in order to be able to quickly and flexibly produce large quantities at a con-stantly high quality – and to continue to shorten delivery times. Your order is dispat-ched via our centralised logistics centre reliably and on time.

Quality as part of our philosophy.

The quality standard of our products is an integral part of our company philosophy.And we guarantee it! So we provide you, the users, with a maximum degree of secu-rity: By means of our own production technology, ifm film technology, as well as bymeans of extensive quality assurance measures such as 100 % final testing. By quali-ty we understand, for example, ecologically conscious production – Made in Germa-ny!

The developmentof innovative

products is oneof our core

competences.Under the name of

i-step we havecome up with a

new product gene-ration which

implements sophi-sticated technolo-gies in industrially

compatible andeasy to handleproducts. From

high-quality stan-dard solutions to

products speciallytailored to the

requirements ofthe individual

industries – frommobile machines

to the foodindustry.

www.ifm.com

www.ifm.comInformation around the clock andaround the globe in 22 languages on the internet.

• Information

- product innovations- company news- exhibition info- locations- jobs

• Documentation

- data sheets- operating instructions- manuals- approvals- CAD data

• Communication*

- request for documents- recall service- live advice- newsletter

• Selection

- interactive product selection aids- configuration tools- data sheet direct

• Animation

- virtual product animations- flash movies (video sequences)

• Application

- applications- product recommendations- calculation aids

• Transaction*

- e-shop processing- e-procurement catalogues- B2B services

*Some offered information is available country-specific

General information

8www.ifm.com

General information

9

Convenient order processingvia the e-shop** on the internet.

Secured authentication

Customer-related priceindication

Real time availability check

Personal product favourites

Online parcel tracking

Individual order history

Convenient quick input form

Simple order processing

Management of shippingaddresses

Confirmations by e-mail

** Already available in many countries.

www.ifm.com

List of articles / approvals

10www.ifm.com

Orderno.

Approvals Cataloguepage

AC003S CE, CUL 220

AC004S CE, CUL 220

AC005S CE, CUL 220

AC007S CE, CUL 220

AC009S CE, CRUUS 220

AC010S CE, CSA, UL 220

AC015S CE, CRUUS 221

AC016S CE, CUL 220

AC0340 215

AC1144 CE 222

AC1146 CE 215

AC1147 CE 215

AC1212 CE, CUL 216

AC1216 CE, CRUUS 216



AC1314 CE, CUL 215

AC1317 CE, CUL 215

AC1326 CE, CUL 215

AC1335 CE, CUL 215

AC1346 CE 215

AC1355 CE, CUL 215

AC1356 CE, CUL 215

AC1375 CE, CUL 215

AC2086 CE 217

AC2216 CE, CUL 216






AC2310 CE, CUL 219

AC2315 CE, CUL 219, 76

AC2316 CE, CUL 219, 76

AC2317 CE, CUL 219, 76

AC2411 CE 217

AC2412 CE 218

AC2413 CE 217

AC2417 CE 217

AC2451 CE 217

AC2452 CE 218

AC2457 CE, CUL 217


AC2730 216

AC2900 CE, CUL 218

AC2904 CE, CUL 218

AC2910 CE, CUL 218

AC2916 CE, CUL 218

AC3000 223

AC315A CE 219, 77

Orderno.


AC316A CE 220, 77

AC317A CE 220, 77

AC326A CE 77

AC4000 CE 223

AC4002 CE 223

AC4007 223

AC4008 223

AC5000 CUL 218

AC5003 CUL 218

AC5014 218

AC5015 219

AC5031 219, 223

AC5204 CE, CUL 217

AC5208 CE, CUL 217

AC5210 CE, CUL 217

AC5214 CE, CUL 217

AC5215 CE, CUL 217

AC5222 CE, CUL 217

AC5227 CE 219

AC5228 CE 219

AC5230 CE, CUL 217

DD2003 CE, CUL 147

DI0001 CE 147

DI5001 CE 147

DI5009 CE 147

DI6001 CE, CUL 147

DN1020 CE, CUL 251

DN1021 CE, CUL 251

DN1030 CE 251

DN1031 CE 251

DN2012 CE, CUL 251

DN2013 CE, CUL 251

DN2014 CE, CUL 251

DN2032 CE, CUL 251

DN2033 CE, CUL 251

DN2035 CE, CUL 251

DN2036 CE, CUL 251

DN3011 CE, CRUUS, CUL 251

DN3012 CE, CRUUS, CUL 251

DTA100 CE, CUL 221, 239

DTA300 CE, CUL 221, 239

DX2003 CE 147

E10017 186, 198, 32

E10189 259

E10190 259

E10191 259

E10200 259

E10579 78

E10584 78

E10585 78

Orderno.


E10661 78

E10734 32, 55

E10735 246, 32, 48

E10736 148, 246, 32

E10737 148, 246, 32

E11030 48

E11031 48

E11032 48

E11033 48

E11034 49

E11036 49

E11047 246, 32, 56

E11048 246, 32, 56

E11078 49

E11197 258

E11198 258

E11200 258

E11201 258

E11220 262

E11221 262

E11223 262

E11224 262

E11231 136, 259

E11232 136, 259

E11248 CRUUS 259

E11249 CRUUS 259

E11310 78

E11487 CRUUS 257

E11488 CRUUS 257

E11490 CRUUS 257

E11491 CRUUS 257

E11493 CRUUS 258

E11494 CRUUS 258

E11495 CRUUS 262

E11496 CRUUS 262

E11498 CRUUS 262

E11499 CRUUS 262

E11504 CRUUS 260

E11505 CRUUS 260

E11508 CRUUS 258

E11509 CRUUS 258

E11521 32

E11530 32

E11531 32

E11533 32

E11534 32

E11572 207

E11664 207

E11796 63

E11797 63


11www.ifm.com

Orderno.


E11798 64

E11799 63

E11801 63

E11816 63

E11817 63

E11818 63

E11819 63

E11820 63

E11821 63

E11822 63

E11823 63

E11877 63

E11898 136, 233

E11900 78

E11914 64

E11928 63

E11929 70

E11950 136, 259

E11958 64

E11959 64

E11960 64

E11961 64

E11984 80

E11989 78

E12004 64

E12009 78

E12010 78

E12042 78

E12043 78

E12123 78

E12166 259

E12167 259

E12168 259

E12169 259

E17105 78

E17118 78

E17148 79

E17205 79

E17294 79

E17320 79

E17321 79

E17322 79

E17323 79

E17324 79

E17325 79

E17326 79

E17327 79

E17328 79

E17329 79

E17330 79

Orderno.


E17331 80

E19503 33

E20004 94

E20005 94

E20600 115

E20615 114

E20639 114

E20718 33, 49, 56

E20722 106, 125

E20738 259

E20765 114

E20767 114

E20768 114

E20773 114

E20774 114

E20860 33

E20861 33

E20870 33, 49, 56

E20873 33, 49

E20874 33, 49

E20903 94

E20907 94

E20911 94

E20915 94

E20939 135, 136

E20941 135, 233

E20952 135

E20953 94

E20954 94

E20956 94

E20965 94

E20966 95

E20969 95

E20974 106, 95

E20984 95

E20993 106

E20994 106

E21015 94

E21084 95

E21087 125, 95

E21088 125, 239, 95

E21117 95

E21120 95

E21125 94

E21126 94

E21166 136, 233

E21168 136, 233

E2D101 125

E2D110 135, 233

E2D112 135, 233

Orderno.


E2D200 135

E30006 157, 186

E30013 EHEDG 186

E30016 199

E30017 199

E30018 199

E30047 199

E30052 FDA 157, 187

E30055 EHEDG 199

E30056 EHEDG 199

E30076 186

E30077 186

E30089 199

E30090 199

E30098 207

E30104 157, 186

E30112 136, 208

E30115 209

E30393 EHEDG 200

E30396 CE 186, 199

E33001 158, 187

E33002 187

E34005 EHEDG 200

E34010 EHEDG 200

E34410 199

E35010 200

E37010 200

E37340 186

E37350 186

E37360 186

E3D103 136

E3D200 136

E40057 171

E40096 170, 200

E40099 170, 200

E40101 170, 200

E40107 200

E40114 170, 200

E40115 170

E40124 170, 199

E40128 170, 200

E40129 170

E40138 170

E40189 171

E40196 171

E40199 171

E43000 155

E43001 155

E43002 155

E43003 155


12www.ifm.com

Orderno.


E43004 155

E43005 155

E43006 155

E43008 155

E43009 155

E43100 155

E43101 156

E43102 156

E43103 156

E43201 156

E43202 156

E43203 156

E43204 156

E43205 156

E43206 156

E43207 156

E43208 156

E43209 156

E43211 156

E43212 157

E43213 157

E43214 157

E43215 157

E43216 157

E43217 157

E43218 157

E43219 157

E43220 157

E43221 157

E43901 49

E43903 49

E43910 156

E60028 142

E60033 141

E60034 141

E60063 141

E60064 141

E7001S 222

E7005S 222

E70062 223

E70096 222

E70123 222

E70213 222

E70230 CRUUS 221

E70231 222

E70297 222

E70320 222

E70354 CUL 218, 222

E70413 223

E70454 CUL 218, 222

Orderno.


E80302 223, 239

E80317 223, 239

E80320 223, 239

E89005 CE 147

E89150 CE 148

EVC002 CRUUS 258, 261

EVC003 CRUUS 258, 261

EVC005 CRUUS 258, 261

EVC006 CRUUS 258, 261

EVC008 CRUUS 258, 262

EVC009 CRUUS 258, 262

EVC013 CRUUS 261

EVC034 CRUUS 261

EVC070 CRUUS 259

EVC071 CRUUS 259

EVC072 CRUUS 259

EVC073 CRUUS 258

EVC074 CRUUS 258

EVC075 CRUUS 258

EVC141 CRUUS 257

EVC142 CRUUS 257

EVC143 CRUUS 257

EVC144 CRUUS 257

EVC145 CRUUS 257

EVC146 CRUUS 257

EVC147 CRUUS 257

EVC148 CRUUS 257

EVC149 CRUUS 257

EVC150 CRUUS 257

EVC151 CRUUS 257

EVC152 CRUUS 257

EVC153 CRUUS 257

EVC154 CRUUS 257

EVC155 CRUUS 257

EVC265 CRUUS 260

EVC266 CRUUS 260

EVC267 CRUUS 260

EVC268 CRUUS 260

EVC269 CRUUS 260

EVC275 CRUUS 260

EVC276 CRUUS 260

EVC277 CRUUS 260

EVC278 CRUUS 260

EVC279 CRUUS 260

EVC280 CRUUS 260

EVC281 CRUUS 260

EVC282 CRUUS 260

EVC283 CRUUS 260

EVC284 CRUUS 260

EVC300 CRUUS 261

Orderno.


EVC301 CRUUS 261

EVC302 CRUUS 261

EVC303 CRUUS 261

EVC304 CRUUS 261

EVC310 CRUUS 261

EVC311 CRUUS 261

EVC312 CRUUS 261

EVC313 CRUUS 261

EVC314 CRUUS 261

EVM001 CRUUS 263

EVM002 CRUUS 263

EVM003 CRUUS 263

EVM004 CRUUS 263

EVM005 CRUUS 263

EVM006 CRUUS 263

EVM007 CRUUS 264

EVM008 CRUUS 264

EVM009 CRUUS 264

EVM010 CRUUS 263

EVM012 CRUUS 263

EVT001 CRUUS 262

EVT002 CRUUS 262

EVT004 CRUUS 262

EVT005 CRUUS 262

EVT007 CRUUS 262

EVT008 CRUUS 262

EVT010 CRUUS 263

EVT013 CRUUS 263

EVT042 CRUUS 263

EVT043 CRUUS 263

EVT044 CRUUS 263

EVT050 CRUUS 262

EVT058 CRUUS 263

EVT060 CRUUS 263

EVT061 CRUUS 263

EVT062 CRUUS 263

EVT067 CRUUS 262

EY1001 CE 125

EY1002 CE 125

EY1003 CE 126

EY1004 CE 126

EY1005 CE 126

EY1006 CE 126

EY1007 CE 126

EY1008 CE 126

EY1009 CE 126

EY1010 CE 126

EY3001 CE 126

EY3002 CE 126

EY3099 CE 126


13www.ifm.com

Orderno.


G1501S CE, CUL 70

G1502S CE 70

G2001S CE 125

GF711S CE 69

GG505S CE, CUL 221, 69

GG507S CE, CUL 69

GG711S CE 69

GI505S CE, CUL 221, 69

GI506S CE, CUL 69

GI701S CE, CUL 69

GI711S CE 69

GI712S CE 69

GM504S CE, CUL 221, 69

GM505S CE, CUL 221, 69

GM701S CE, CUL 70

GM705S CE, CUL 70

I7R201 CE, CUL 25

I7R202 CE, CUL 25

I7R203 CE, CUL 25

I7R204 CE, CUL 25

I7R205 CE, CUL 25

I7R206 CE, CUL 25

I7R207 CE, CUL 25

I7R208 CE, CUL 25

I7R209 CE, CUL 25

I7R210 CE, CUL 25

I7R211 CE, CUL 25

I7R212 CE, CUL 25

I7R213 CE, CUL 25

I7R214 CE, CUL 25

I7R215 CE, CUL 25

I7R216 CE, CUL 25

I7R217 CE 25

I85000 CE, CUL 26

I85001 CE, CUL 26

I85002 CE, CUL 26

I85003 CE, CUL 26

I85004 CE, CUL 26

I85005 CE, CUL 26

I85006 CE, CUL 26

I85007 CE, CUL 26

ID0013 CCC, CE, CUL 23

ID5046 CE, CUL 24

ID5058 CE 24

ID5059 CE, CUL 29

IE5338 CE, CUL 21

IE5340 CE, CUL 21

IE5343 CE, CUL 21

IE5345 CE, CUL 21

IF0005 CCC, CE 22

Orderno.


IF0007 CCC, CE 22

IFC204 CE, CUL 27

IFC205 CE, CUL 27

IFC206 CE, CUL 27

IFC258 CE, CUL 26

IFM205 CCC, CE, CUL, E1 245, 27

IFM206 CCC, CE, CUL, E1 245, 28

IFR200 CE, CUL 28

IFS204 CE, CUL 23

IFS205 CE, CUL 23

IFS208 CE, CUL 23

IFS209 CE, CUL 23

IFT200 CE, CUL 29

IFT202 CE, CUL 29

IFT203 CE, CUL 29

IFT205 CE, CUL 29

IFT206 CE, CUL 30

IFT208 CE, CUL 30

IFT240 CE, CUL 29

IFT243 CE 29

IG0011 CCC, CE, CUL 22

IG0012 CCC, CE 22

IGC204 CE, CUL 27

IGC205 CE, CUL 27

IGC206 CE, CUL 27

IGM204 CCC, CE, CUL, E1 245, 28

IGM205 CCC, CE, CUL, E1 245, 28

IGR200 CE, CUL 28

IGS204 CE, CUL 23

IGS205 CE, CUL 23

IGS208 CE, CUL 23

IGS209 CE, CUL 24

IGT200 CE, CUL 30

IGT202 CE, CUL 30

IGT203 CE, CUL 30

IGT205 CE, CUL 30

IGT206 CE, CUL 30

IGT208 CE, CUL 30

IGT247 CE, CUL 29

II0011 CE, CUL, CCC 22

II0012 CE, CUL, CCC 22

IIC200 CE, CUL 27

IIC201 CE, CUL 27

IIC224 CE, CUL 27

IIM208 CCC, CE, CUL, E1 245, 28

IIM209 CCC, CE, CUL, E1 245, 28

IIR200 CE, CUL 28

IIS204 CE, CUL 24

IIS205 CE, CUL 24

IIS206 CE, CUL 24

Orderno.


IIS207 CE, CUL 24

IIT002 CCC, CE, CUL 31

IIT200 CE, CUL 30

IIT202 CE, CUL 30

IIT204 CE, CUL 30

IIT205 CE, CUL 30

IIT207 CE, CUL 31

IIT209 CE, CUL 31

IIT228 CE, CUL 29

IL5020 CE, CUL 21

IM0010 CCC, CE, CUL 22

IM0011 CCC, CE, CUL 22

IM0049 CCC, CE 23

IM0054 CCC, CE 23

IM5020 CE, CUL 22

IM5037 CCC, CE 22

IM5038 CCC, CE 22

IM5046 CE 22

IM5115 CE, CUL 24

IM5116 CE, CUL 24

IM5117 CE, CUL 24

IM5123 CE, CUL 24

IM5124 CE, CUL 24, 28

IM5126 CE, CUL 24, 28

IM5127 CE 27

IM5136 CE, CUL 24

IN0108 CCC, CE, CUL 75

IN0110 CCC, CE 75

IN507A CE 77

IN5121 CE 21

IN5129 CE 21

IN5224 CE 75

IN5251 CE 75

IN5285 CE, CUL 75

IN5304 CE 75

IN5323 CE 75

IN5327 CE, CUL 75

IN5331 CE 75

IN5334 CE, CUL 75

IN5409 CE 76

IS5026 CE, CUL 21

IS5070 CE 21

IT5042 CE, CUL 21

IT5043 CE, CUL 21

IV5003 CE 22

IV5004 CE 22

IV5025 CE 29

IX5010 CE 77

IY5051 CE 21

IZ5047 CE, CUL 21


14www.ifm.com

Orderno.


IZ5048 CE, CUL 21

IZ5051 CE 21

JAT201 CE 25

KD0009 CCC, CE 46

KD5018 CE 45

KF5001 CE, CUL 45

KF5002 CE, CUL 45

KG0009 CCC, CE 45

KG0010 CCC, CE 45

KG5065 CE, CUL 47

KI0016 CCC, CE, CUL 46

KI0020 CCC, CE, CUL 46

KI0054 CE 47

KI5001 CE, CUL 45

KI5002 CE, CUL 45

KI5030 CCSAUS, CE, FM, IEC 47

KI5082 CE, CUL 47

KI5084 CE, CUL 45

KI5085 CE, CUL 45

KI5087 CE, CUL 45

KQ6001 CE, CUL 46

KQ6002 CE, CUL 46

KQ6003 CE, CUL 46

KQ6004 CE, CUL 46

KQ6005 CE, CUL 47

KX5001 CCSAUS, CE, FM 48

LI5141 CE, CUL 155

LI5142 CE, CUL 155

LI5143 CE, CUL 155

LI5144 CE, CUL 155

LK1022 CE, CUL 153

LK1023 CE, CUL 153

LK1024 CE, CUL 153

LK3122 CE, CUL 153

LK3123 CE, CUL 153

LK3124 CE, CUL 153

LK8122 CE, CUL 153

LK8123 CE, CUL 153

LK8124 CE, CUL 153

LR3000 CE, CUL 153

LR7000 CE, CUL 153

LR8000 CE, CUL 153

LT8022 CE, CUL 153

LT8023 CE, CUL 153

LT8024 CE, CUL 153

ME5010 CE, CUL 55

ME5011 CE, CUL 55

MFS200 CE, CUL 55

MFS201 CE, CUL 55

MFS202 CE, CUL 55

Orderno.


MFT200 CE, CUL 55

MGS200 CE, CUL 55

MGS201 CE, CUL 55

MGT200 CE, CUL 55

MK5100 CE, CUL 61

MK5101 CE, CUL 61

MK5102 CE, CUL 61

MK5103 CE, CUL 61

MK5104 CE, CUL 61

MK5106 CE, CUL 61

MK5107 CE, CUL 61

MK5108 CE, CUL 61

MK5110 CE, CUL 61

MK5111 CE, CUL 61

MK5138 CE, CUL 62

MK5139 CE, CUL 62

MK5140 CE, CUL 62

MK5157 CE, CUL 62

MK5300 CE, CUL 62

MK5301 CE, CUL 62

MK5302 CE, CUL 62

MK5306 CE, CUL 62

MK5307 CE, CUL 62

N0531A CE, CSA, FM, IEC 31, 48



N95001 CE, IEC 77

N95002 CE 77

NF500A CCSAUS, CE, FM, IEC 31

NF501A CCSAUS, CE, FM, IEC 31

NG500A CCSAUS, CE, FM, IEC 31

NG501A CCSAUS, CE, FM, IEC 31

NI500A CCSAUS, CE, FM, IEC 31

NI501A CCSAUS, CE, FM, IEC 31

NN5008 CCSAUS, CE, FM 76



NN5013 CE, IEC 77

O1D100 CE, CUL 121

O1D101 CE, CUL 106

O1D103 CE, CUL 121

O1D104 CE, CUL 106

O1D105 CE, CUL 121

O1D106 CE, CUL 121

O1D155 CE, CUL 121

O2D220 CE, CUL 135

O2D222 CE, CUL 135

O2D900 CE, CUL 135

O2D901 CE, CUL 135

O2D902 CE, CUL 135

Orderno.


O2D903 CE, CUL 135

O2D904 CE, CUL 135

O2I100 CE, CUL 233

O2I102 CE, CUL 233

O2I104 CE, CUL 233

O3D200 CE 136

O4E500 CE, CUL 93

O4E501 CE, CUL 93

O4H500 CE, CUL 93

O4H501 CE, CUL 93

O4P200 CE, CUL 93

O4P500 CE, CUL 93

O4P501 CE, CUL 93

O4S500 CE, CUL 93

O4S501 CE, CUL 93

O5C500 CE 121

O5E200 CE, CUL 92

O5E501 CE, CUL 92

O5G500 CE, CUL 121

O5H200 CE, CUL 92

O5H201 CE, CUL 92

O5H500 CE, CUL 92

O5H503 CE, CUL 92

O5P200 CE, CUL 92

O5P501 CE, CUL 92

O5S200 CE, CUL 92

O5S501 CE, CUL 92

OB5013 CE, CUL 113

OB5014 CE, CUL 113

OBF500 CE, CUL 113

OBF501 CE, CUL 113

OBF502 CE, CUL 113

OBF503 CE, CUL 113

OD5005 CE 121

OD5007 CE 121

OD5009 CE 122

OD5011 CE 122

OD5013 CE 122

OG0030 CCC, CE, CUL 90

OG0033 CCC, CE 90

OG0035 CCC, CE 90

OG0039 CCC, CE 90

OGE100 CE, CUL 87

OGE101 CE, CUL 87

OGE200 CE, CUL 87

OGE280 CE, CUL 89

OGE281 CE, CUL 89

OGE282 CE, CUL 89

OGE300 CE, CUL 89

OGE301 CE, CUL 89


15www.ifm.com

Orderno.


OGE302 CE, CUL 88

OGE303 CE, CUL 88

OGE500 CE, CUL 87

OGE502 CE, CUL 88

OGE700 CE, CUL 105

OGH200 CE, CUL 87

OGH280 CE, CUL 89

OGH282 CE, CUL 89

OGH283 CE, CUL 89

OGH300 CE, CUL 89

OGH301 CE, CUL 89

OGH302 CE, CUL 89

OGH303 CE, CUL 89

OGH304 CE, CUL 89

OGH305 CE, CUL 89

OGH306 CE, CUL 88

OGH307 CE, CUL 88

OGH308 CE, CUL 88

OGH309 CE, CUL 88

OGH310 CE, CUL 88

OGH311 CE, CUL 89

OGH500 CE, CUL 88

OGH501 CE, CUL 88

OGH502 CE, CUL 88

OGH504 CE, CUL 88

OGH580 CE, CUL 89

OGH581 CE, CUL 89

OGH700 CE, CUL 105

OGP100 CE, CUL 87

OGP101 CE, CUL 87

OGP200 CE, CUL 87

OGP201 CE 87

OGP280 CE, CUL 89

OGP281 CE, CUL 89

OGP282 CE, CUL 89

OGP300 CE, CUL 89

OGP301 CE, CUL 89

OGP302 CE, CUL 88

OGP303 CE, CUL 88

OGP500 CE, CUL 88

OGP502 CE, CUL 88

OGP503 CE, CUL 88

OGP700 CE, CUL 105

OGS100 CE, CUL 87

OGS200 CE, CUL 87

OGS280 CE, CUL 89

OGS300 CE, CUL 89

OGS301 CE, CUL 88

OGS500 CE, CUL 87

OGS501 CE, CUL 88

Orderno.


OGS700 CE, CUL 105

OGT100 CE, CUL 87

OGT101 CE, CUL 87

OH5003 CE 90

OH5005 CE 90

OH5007 CE 90

OH5011 CE 90

OH5012 CE 90

OJ5022 CE, CUL 91

OJ5023 CE, CUL 91

OJ5026 CE, CUL 91

OJ5027 CE, CUL 91

OJ5030 CE, CUL 91

OJ5031 CE, CUL 91

OJ5032 CE, CUL 91

OJ5048 CE, CUL 91

OJ5054 CE, CUL 105

OJ5058 CE, CUL 105

OJ5071 CE, CUL 91

OJ5086 CE, CUL 121

OJ5114 CE, CUL 106

OJ5136 CE, CUL 106

OJ5138 CE, CUL 105

OJ5139 CE, CUL 106

OJ5141 CE, CUL 105

OJ5142 CE, CUL 106

OJ5152 CE, CUL 106

OJ5154 CE, CUL 105

OJ5158 CE, CUL 105

OL0004 CCC, CE 91

OL0005 CCC, CE 91

OL0006 CE 91

OL0007 CCC, CE 91

OO5000 CE, CUL 113

OO5001 CE, CUL 113

OO5002 CE, CUL 113

OO5003 CE, CUL 113

OPL200 CE, CUL 123

OPL201 CE, CUL 123

OPL202 CE, CUL 123

OPL203 CE, CUL 123

OPU200 CE 122

OPU201 CE, CUL 122

OPU202 CE, CUL 122

OPU203 CE, CUL 122

OPU204 CE, CUL 122

OPU205 CE, CUL 122

OPU207 CE 122

OPU208 CE, CUL 122

OPU209 CE, CUL 122

Orderno.


OPU210 CE, CUL 122

OPU211 CE, CUL 122

OY031S CE, CUL 123

OY032S CE, CUL 123

OY033S CE, CUL 123

OY034S CE, CUL 123

OY035S CE, CUL 123

OY036S CE, CUL 123

OY037S CE, CUL 123

OY038S CE, CUL 123

OY039S CE, CUL 123

OY040S CE, CUL 123

OY041S CE, CUL 124

OY042S CE, CUL 124

OY043S CE, CUL 124

OY044S CE, CUL 124

OY045S CE, CUL 124

OY046S CE, CUL 124

OY047S CE, CUL 124

OY048S CE, CUL 124

OY049S CE, CUL 124

OY050S CE, CUL 124

OY051S CE, CUL 123

OY052S CE, CUL 123

OY053S CE, CUL 123

OY054S CE, CUL 123

OY055S CE, CUL 123

OY056S CE, CUL 123

OY057S CE, CUL 123

OY058S CE, CUL 123

OY059S CE, CUL 123

OY060S CE, CUL 123

OY061S CE, CUL 124

OY062S CE, CUL 124

OY063S CE, CUL 124

OY064S CE, CUL 124

OY065S CE, CUL 124

OY066S CE, CUL 124

OY067S CE, CUL 124

OY068S CE, CUL 124

OY069S CE, CUL 124

OY070S CE, CUL 124

OY072S CE, CUL 123

OY073S CE, CUL 123

OY074S CE, CUL 123

OY075S CE, CUL 123

OY076S CE, CUL 123

OY077S CE, CUL 123

OY078S CE, CUL 123

OY079S CE, CUL 123


16www.ifm.com

Orderno.


OY080S CE, CUL 123

OY082S CE, CUL 124

OY083S CE, CUL 124

OY084S CE, CUL 124

OY085S CE, CUL 124

OY086S CE, CUL 124

OY087S CE, CUL 124

OY088S CE, CUL 124

OY089S CE, CUL 124

OY090S CE, CUL 124

OY094S CE, CUL 124

OY095S CE, CUL 124

OY096S CE, CUL 124

OY097S CE, CUL 124

OY098S CE, CUL 124

OY099S CE, CUL 124

OY100S CE, CUL 124

OY104S CE, CUL 124

OY105S CE, CUL 124

OY106S CE, CUL 124

OY107S CE, CUL 124

OY108S CE, CUL 124

OY109S CE, CUL 124

OY110S CE, CUL 124

OY111S CE, CUL 125

OY112S CE, CUL 125

OY113S CE, CUL 125

OY114S CE, CUL 125

OY115S CE, CUL 125

OY116S CE, CUL 125

PA3020 CE 182, 245

PA3021 CE 182, 245

PA3022 CE, CUL 182, 245

PA3023 CE, CUL 182, 245

PA3024 CE, CUL 182, 245

PA3026 CE, CUL 182

PA3027 CE, CUL 182

PA3029 CE, CUL 182

PA3060 CE 182, 245

PF2652 CE, CUL, EHEDG, FDA 185






PG2451 CE 184

PG2452 CE 184

PG2453 CE 184

PG2454 CE 184

PG2456 CE 184

Orderno.


PG2457 CE 184

PG2458 CE 184

PG2489 CE 184

PG2789 CE, EHEDG, FDA 154, 184

PG2793 CE, CUL, EHEDG, FDA 184



PG2796 CE, CUL, EHEDG, FDA 154, 184




PI1093 CE, CUL, EHEDG, FDA 183




PI1097 CE, CUL, EHEDG, FDA 154, 183

























PIM093 CE, CUL, EHEDG, FDA 184




PK6520 CE, CUL 181

PK6521 CE, CUL 181

PK6522 CE, CUL 181

PK6523 CE, CUL 181

PK6524 CE, CUL 181

PK7520 CE, CUL 181

Orderno.


PK7521 CE, CUL 181

PK7522 CE, CUL 181

PK7524 CE, CUL 181

PL2053 CE, CUL, EHEDG, FDA 185











PM2053 CE, CUL, EHEDG, FDA 185




PMP094 CE, CUL, EHEDG, FDA 185




PN2009 CE, CUL 181

PN2020 CE, CUL 181

PN2021 CE, CUL 181

PN2022 CE, CUL 181

PN2023 CE, CUL 181

PN2024 CE, CUL 181

PN2026 CE, CUL 181

PN2069 CE, CUL 154, 181

PN7809 CE, CUL 183

PN7834 CE, CUL 183

PP2001 CE, CUL 186, 246

PQ7809 CE 181

PQ7834 CE 181

PS3208 CE 154, 183

PS3407 CE 154, 183

PS3417 CE 154, 183

PT3540 CE, CUL 182

PT3541 CE, CUL 182

PT3542 CE, CUL 182

PT3543 CE, CUL 182

PT3550 CE, CUL 182, 245

PT3551 CE, CUL 182, 245

PT3552 CE, CUL 182, 245

PT3553 CE, CUL 182, 245

PT3554 CE, CUL 182, 245

PT9540 CE, CUL 182

PT9541 CE, CUL 182

PT9542 CE, CUL 182


17www.ifm.com

Orderno.


PT9543 CE, CUL 182

PT9544 CE, CUL 182

PT9550 CE, CUL 182, 245

PT9551 CE, CUL 182, 245

PT9552 CE, CUL 182, 245

PT9553 CE, CUL 182, 245

PT9554 CE, CUL 182, 245

RB1015 CE, CRUUS 141




RM3005 CE, CRUUS 141

RO6344 CE, CRUUS 141

RO6345 CE, CRUUS 141

RU1016 CE, CRUUS 141

RU1025 CE, CRUUS 141

SBU323 CE, CUL 166

SBU324 CE, CUL 166

SBU325 CE, CUL 166

SBU623 CE, CUL 166

SBU624 CE, CUL 166

SBU625 CE, CUL 166

SBY332 CE, CUL 167

SBY333 CE, CUL 167

SBY334 CE, CUL 167

SBY346 CE, CUL 167

SBY357 CE, CUL 167

SD2000 CE, CUL 169

SD6000 CE, CUL 169

SD6100 CE, CUL 169

SD8000 CE, CUL 169

SD9000 CE, CUL 169

SF211A TIIS 168

SF221A 168

SF320A IEC 168

SF321A IEC 168

SF5200 CUL 167

SF5300 167

SF5350 CUL 167

SF5700 CUL 167

SF5800 CUL 167

SF6200 CUL 167

SI5000 CE, CUL 165

SI5002 CE, CUL 165

SI5004 CE 165

SI5006 CE, CUL 165

SI5007 CE, CUL 166

SI5010 CE, CUL 165

SI6000 CE, CUL, EHEDG 166


Orderno.



SI6600 CE, CUL, EHEDG, FDA 166



SL0101 CE 169

SL5101 CE 169

SM6000 CE, CUL 165

SM6050 CE, CUL 165

SM8000 CE, CUL 165

SN0150 CE, CUL 168

SN2301 CE, IEC 168

SN2302 CE, IEC 168

SR0150 CE, CUL 168

SR2301 CE, IEC 168

SR5900 CE, CUL 168

SU7000 CE, CUL 170

SU8000 CE, CUL 170

SU9000 CE, CUL 170

TA3130 CE, CUL 197

TA3430 CE, CUL, EHEDG 198

TA3431 CE, CUL, EHEDG 198

TAA131 CE, CUL 197

TAA431 CE, CUL, EHEDG 198

TK6130 CE, CUL 195

TK7130 CE, CUL 195

TM0061 CUL, EHEDG 196

TN2531 CE, CUL 195

TN7531 CE, CUL 195

TP3237 CE 196

TR2432 CE, CUL 195

TR8430 CE, CUL 195

TS0759 197

TS2051 CUL 196, 198

TS2056 196, 198

TS2229 197

TS2251 196

TS2256 196

TS2659 196

TS2759 196

TS4759 196

TS5051 CUL 197, 198

TS522A CE 197

TT0061 CUL 198

TT1050 CUL 196

TT1061 CUL 198

TT1250 CUL 196

TT2050 CUL 196

TT3250 CUL 196

VE1001 CE, CUL 207

VE1101 CE, CUL 207

Orderno.


VE113A CE, IEC 207

VES003 208

VKV021 CE, CUL 207

VKV022 CE 207

VSA001 CE, CUL 208

VSA002 CE, CUL 208

VSA003 CE, CUL 208

VSE100 CE, CUL 208

Inductive sensors

Selection chart Page

Sensors for industrial applications, DC 21 - 22

Sensors for industrial applications, AC and AC/DC 22 - 23

Sensors with increased sensing range for industrial automation 23 - 24

Photoelectric sensors 25 - 25

Ring sensors 25 - 25

Tube sensors 26 - 26

Full-metal sensors for oils and coolants 26 - 27

Sensors for oils and coolants 27 - 27

Sensors for oils and coolants with ceramic sensing face 27 - 27

Sensors for mobile applications 27 - 28

Full-metal sensors with non-stick coating against weld spatter 28 - 28

Electromagnetic field immune sensors with correction factor K = 1 28 - 28

Electromagnetic field immune sensors 29 - 29

Full-metal sensors for hygienic and wet areas 29 - 29

Sensors for hygienic and wet areas with increased sensing range 29 - 31

Sensors with ATEX approval 1D / 1G / 2G 31 - 31

Switching amplifiers with ATEX approval 31 - 32

Accessories 32 - 33

Wiring diagrams 33 - 34

Scale drawings - CAD download: www.ifm.com 34 - 41

19www.ifm.comwww.ifm.com

Inductive proximity sensors forall industries.

Wide choice of housing stylesand operating voltages.

High-quality housing materials.

Cylindrical housings from 3 to 34 mm diameter, various rectangular housings.

Large supporting range of mountingand wiring accessories.

Inductive sensors

In all automated processes sensors are absolutely necessary to provide the PLC withinformation. They supply the necessary signals on positions, limits or serve as pulsepick-ups for counting tasks or for monitoring rotational speed. Inductive and capaci-tive sensors are nowadays indispensable for industrial usage. As compared to me-chanical switches they offer ideal conditions: non-contact operation free from anywear and tear, high switching frequencies and accuracy. In addition, they are in-sensitive to vibration, dust and moisture. Inductive sensors detect all metals withoutcontact, capacitive sensors almost all solid and liquid media such as metal, glass,wood, plastic, water, oil, etc.

Operating principle of inductive sensors

Inductive sensors take advantage of the physical effect of the change in the qualityfactor in a resonant circuit caused by eddy current losses in conductive materials. Thisis how it works: A LC tuned circuit generates a high frequency electromagnetic field.This field is radiated from the active face of the sensor. If a conductive material entersthis field, eddy currents will be formed in accordance with the law of inductancewhich draw energy from the oscillator. This reduces the oscillation amplitude. Thechange is converted into a switching signal. The operating principle permits detec-tion of all metals irrespective of whether they are moving or not. The distance to theactive face at which an electrically conductive material causes a change of signal inthe sensor is called sensing range. The sensing range of an inductive sensor is definedby means of a target of mild steel (Fe 360). If the switch is damped by other metals,e.g. aluminium or copper, this is reduced. Using correction factors the user cancalculate the attainable sensing ranges.

Application sensors

Every application has its own requirements as regards the sensors to be used. Tem-perature shocks, mechanical influences or aggressive cleaning agents are just a fewof the possible environmental influences to which sensors are subjected. ifm elec-tronic therefore offers inductive sensors which have been developed for special appli-cations. This includes for example the use of selected housing materials such as stain-less steel, LCP, PEEK, PBT or Duroplast. An innovative, consistent sealing conceptfrom the sensor to the connector ensures ideal protection against ingress of mois-ture and aggressive media.

Typical application:Positioning sensing inautomation technolo-gy; proximity sensorsoperate reliably andwithout wear.

High frequencyelectromagnetic field:The inductive sensor

detects all metals.

Inductive sensors

20www.ifm.com

Sensors for industrial applications, DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · DC PNP · Wiring diagram no. 1

Ø 4 / L = 23 0.8 f stainless steel 10...30 IP65 2000 100 1 IZ5051

Ø 3 / L = 27 1 nf stainless steel 10...30 IP67 5000 100 2 IZ5048

Ø 4 / L = 27 1.5 nf stainless steel 10...30 IP67 1800 100 3 IZ5047

M5 / L = 23 0.8 f stainless steel 10...30 IP65 2000 100 4 IY5051

Ø 6.5 / L = 27 2 f high-grade st. steel 10...30 IP67 1500 100 5 IT5042

Ø 6.5 / L = 27 4 nf high-grade st. steel 10...30 IP67 500 100 6 IT5043

Cable 2 m · Output function · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 14

M8 / L = 37 3 f brass 10...30 IP67 1000 100 7 IE5343

M8 / L = 37 5 nf brass 10...30 IP67 700 100 8 IE5345

M8 connector · Output function · 3-wire DC PNP; 2-wire DC PNP/NPN · Wiring diagram no. 15

M8 / L = 40 3 f brass 10...30 IP67 1000 100 9 IE5338

M8 / L = 40 5 nf high-grade st. steel 10...30 IP67 700 100 10 IE5340


40 x 8 x 8 2.5 f brass 10...36 IP65 2000 250 11 IL5020

28 x 10 x 16 4 nf PBT 10...36 IP67 2000 250 12 IS5070

Cable 2 m · Output function · DC PNP/NPN · Wiring diagram no. 16

28 x 10 x 16 2 f PBT 5...36 IP67 2000 200 13 IS5026


40 x 12 x 26 2 f PBT 10...36 IP67 1400 250 14 IN5121

40 x 12 x 26 4 nf PBT 10...36 IP67 1300 250 14 IN5129

Inductive sensors

21www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Terminals · Output function · DC PNP · Wiring diagram no. 2

40 x 40 x 120 15 f PPE 10...36 IP65 350 250 15 IM5020

40 x 40 x 120 30 nf PPE 10...36 IP65 100 250 15 IM5046

Terminals · Output function · DC PNP/NPN · Wiring diagram no. 17

40 x 40 x 120 15 f PPE 10...55 IP65 > 350 400 15 IM5037

40 x 40 x 120 20 nf PPE 10...55 IP65 > 300 400 15 IM5038


40 x 40 x 118 15 f PBT 10...60 IP67 150 200 16 IV5003

40 x 40 x 118 20 f PBT 10...60 IP67 150 200 17 IV5004

f = flush / nf = non flush

Sensors for industrial applications, AC and AC/DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · AC · Wiring diagram no. 4

M12 / L = 71 2 f brass 20...250 IP67 25 250 18 IF0005*

M12 / L = 71 4 nf brass 20...250 IP67 25 250 19 IF0007*

Cable 2 m · Output function · AC/DC · Wiring diagram no. 5

M18 / L = 80 5 f brass 20...250 IP67 25 / 50 350 / 100 20 IG0011*

M18 / L = 80 8 nf brass 20...250 IP67 25 / 50 350 / 100 21 IG0012*

M30 / L = 81 10 f brass 20...250 IP67 25 / 50 350 / 100 22 II0011*

M30 / L = 81 15 nf brass 20...250 IP67 25 / 50 350 / 100 23 II0012*

Terminals · Output function · AC/DC · Wiring diagram no. 6

40 x 40 x 120 15 f PPE 20...250 IP65 20 / 55 350 / 100 15 IM0011*

40 x 40 x 120 20 nf PPE 20...250 IP65 20 / 55 350 / 100 15 IM0010*

Inductive sensors

22www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

1/2“ connector · Output function · AC/DC · Wiring diagram no. 7

40 x 40 x 66 35 nf PPE 20...250 IP67 20 / 50 350 / 100 24 IM0049*

M12 connector · Output function · AC/DC · Wiring diagram no. 7

40 x 40 x 66 20 f PPE 20...250 IP67 25 / 140 350 / 100 25 IM0054*


105 x 80 x 40 60 nf modified PPE 20...250 IP65 4 350 / 100 26 ID0013*


* Note for AC and AC/DC units

Miniature fuse to IEC60127-2 sheet 1, ≤ 2 A (fast acting). Recommendation: check the unit for reliable function after a shortcircuit.

Sensors with increased sensing range for industrial automation

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function · DC PNP · Wiring diagram no. 8

M12 / L = 45 4 f brass 10...36 IP67 700 100 27 IFS204

M12 / L = 50 7 nf brass 10...36 IP67 700 100 28 IFS205


M12 / L = 70 4 f brass 10...30 IP67 500 100 29 IFS208

M12 / L = 70 7 nf brass 10...30 IP67 500 100 30 IFS209


M18 / L = 46 8 f brass 10...36 IP67 400 100 31 IGS204

M18 / L = 51 12 nf brass 10...36 IP67 300 100 32 IGS205


M18 / L = 70 8 f brass 10...30 IP67 400 100 33 IGS208

Inductive sensors

23www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 70 12 nf brass 10...30 IP67 300 100 34 IGS209


M30 / L = 50 15 f brass 10...36 IP67 100 100 35 IIS204

M30 / L = 50 22 nf brass 10...36 IP67 100 100 36 IIS205


M30 / L = 70 15 f brass 10...30 IP67 100 100 37 IIS206

M30 / L = 70 22 nf brass 10...30 IP67 100 100 38 IIS207


40 x 40 x 54 20 f PA (polyamide) 10...36 IP67 100 200 39 IM5115

40 x 40 x 54 35 nf PA (polyamide) 10...36 IP67 80 200 39 IM5116







92 x 80 x 40 50 f PPE 10...36 IP67 70 250 41 ID5058

M12 connector · Output function normally open / closed programmable *) · DC PNP · Wiring diagram no. 8

105 x 80 x 40 60 nf PPE 10...36 IP67 100 250 42 ID5046


Inductive sensors

24www.ifm.com

Photoelectric sensors

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 63 50 f high-grade st. steel 10...30 IP68 / IP69K 1600 100 43 JAT201


Ring sensors

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


60 x 35 x 20 – PA (polyamide) 10...35 IP67 – 200 44 I7R201








M12 connector · Output function · DC NPN · Wiring diagram no. 11











Inductive sensors

25www.ifm.com

Tube sensors

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


70 x 20 x 12 ≤ 14 polycarbonate 10...35 IP67 – 200 49 I85000



Cable with connector 0.09 m · Output function · DC PNP · Wiring diagram no. 10


Cable with connector 0.09 m · Output function · DC NPN · Wiring diagram no. 11










Full-metal sensors for oils and coolants

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 60 3 f high-grade st. steel 10...36 IP67 / IP68 100 100 51 IFC258

Inductive sensors

26www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M30 / L = 70 10 f high-grade st. steel 10...36 IP67 / IP68 50 100 52 IIC224


Sensors for oils and coolants

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function · DC PNP/NPN · Wiring diagram no. 19



Sensors for oils and coolants with ceramic sensing face

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 45 4 f brass 10...36 IP68 700 100 27 IFC206

M12 / L = 45 4 f brass 10...36 IP68 700 100 27 IFC204

M12 / L = 50 7 nf brass 10...36 IP68 700 100 28 IFC205

M18 / L = 46 8 f brass 10...36 IP68 400 100 31 IGC206

M18 / L = 46 8 f brass 10...36 IP68 400 100 31 IGC204

M18 / L = 51 12 nf brass 10...36 IP68 300 100 32 IGC205

M30 / L = 50 15 f brass 10...36 IP68 100 100 35 IIC200

M30 / L = 50 22 nf brass 10...36 IP68 100 100 36 IIC201


Sensors for mobile applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 70 4 f high-grade st. steel 10...60 IP67 / IP69K 400 200 54 IFM205

Inductive sensors

27www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 70 7 nf stainless steel 10...60 IP67 / IP69K 300 200 55 IFM206

M18 / L = 70 8 f stainless steel 10...60 IP67 / IP69K 200 200 56 IGM204

M18 / L = 70 12 nf stainless steel 10...60 IP67 / IP69K 200 200 57 IGM205

M30 / L = 70 12 f stainless steel 10...60 IP67 / IP69K 100 200 37 IIM208

M30 / L = 70 22 nf stainless steel 10...60 IP67 / IP69K 100 200 38 IIM209


Full-metal sensors with non-stick coating against weld spatter

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 60 4 f high-grade st. steel 10...36 IP67 2 100 51 IFR200

M18 / L = 70 6 f high-grade st. steel 10...36 IP67 2 100 58 IGR200

M30 / L = 70 12 f high-grade st. steel 10...36 IP67 2 100 52 IIR200


Electromagnetic field immune sensors with correction factor K = 1

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.





Inductive sensors

28www.ifm.com

Electromagnetic field immune sensors

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


40 x 40 x 118 15 f modified PPE 10...60 IP67 50 200 59 IV5025


92 x 80 x 40 50 f PPE 10...36 IP67 70 250 41 ID5059


Full-metal sensors for hygienic and wet areas

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 60 3 f high-grade st. steel 10...36 IP68 / IP69K 100 100 60 IFT243


M18 / L = 70 5 f high-grade st. steel 10...36 IP68 / IP69K 100 100 58 IGT247

M30 / L = 70 10 f high-grade st. steel 10...36 IP68 / IP69K 50 100 52 IIT228


Sensors for hygienic and wet areas with increased sensing range

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.



M12 / L = 50 7 nf high-grade st. steel 10...36 IP68 / IP69K 800 100 61 IFT200




Inductive sensors

29www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.






M18 / L = 51 12 nf high-grade st. steel 10...36 IP68 / IP69K 300 100 64 IGT200









M30 / L = 50 22 nf high-grade st. steel 10...36 IP68 / IP69K 100 100 68 IIT200




Inductive sensors

30www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

1/2“ connector · Output function · AC/DC · Wiring diagram no. 12

M30 / L = 70 22 nf high-grade st. steel 20...140 IP68 / IP69K 25 / 100 200 69 IIT002





Sensors with ATEX approval 1D / 1G / 2G

Type Dimensions

[mm]

Sensingrange[mm]

Material Unom.at 1 KΩ

[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

M12 connector · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 13

M12 / L = 45 4 f brass 8.2 DC 7.5...30 210 115 700 27 NF501A

M12 / L = 50 7 nf brass 8.2 DC 7.5...30 210 145 700 28 NF500A

M18 / L = 46 8 f brass 8.2 DC 7.5...30 200 190 400 31 NG501A

M18 / L = 51 12 nf brass 8.2 DC 7.5...30 200 85 300 32 NG500A

M30 / L = 50 15 f brass 8.2 DC 7.5...30 230 210 100 35 NI501A

M30 / L = 50 22 nf brass 8.2 DC 7.5...30 250 120 100 36 NI500A


Switching amplifiers with ATEX approval

Type Ub

[V]

Power / currentconsumption[VA] / [mA]

f

[Hz]

Ta

[°C]

Output Protection Draw-ingno.

Orderno.

24 / < 50 5000 -20...602 transistor outputs PNP (100 mA, short-

circuit protection)IP20 72 N0531A

Inductive sensors

31www.ifm.com

Type Ub

[V]


f

[Hz]

Ta

[°C]


Orderno.

24 / < 50 5000 -20...602 outputs (optocoupler, bipolar, 100 mA,

short-circuit protection)IP20 72 N0532A

24 / < 50 5000 -20...602 transistor outputs PNP (100 mA, short-

circuit protection)IP20 72 N0534A

Accessories

Type Description Orderno.

Angle bracket · for type M8 · Housing materials: stainless steel E10734




Mounting clamp · Ø 8 mm · with end stop · for type M8 · Housing materials: PC E11521

Mounting clamp · Ø 34 mm · Housing materials: PBT E10017

Mounting clip · Ø 12 mm · for smooth body switches - Ø 12 mm · Form V · Housing materials: V4A E11530

Mounting clip · Ø 18 mm · for smooth body switches - Ø 18 mm · Form V · Housing materials: V4A E11531

Mounting clip · Form O · for type M12 · Housing materials: stainless steel E11533

Mounting clip · Form O · for type M18 · Housing materials: stainless steel E11534



Inductive sensors

32www.ifm.com


Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: clamp: diecast zinc /fixture: steel

E20718

Mounting set · Ø 12.2 mm · Clamp mounting · free-standing M8 · for type OF, IF · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: diecast zinc

E20860

Mounting set · Ø 12.2 mm · Clamp mounting · free-standing M8 · for type OF, IF · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: stainless steel

E20861

Mounting set · Ø 18.5 mm · Clamp mounting · free-standing M10 · for type OG, IG, KG · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel

E20870

Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc

E20873

Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel

E20874

Plastic nut for flow plate · M18 x 1 · Housing materials: POM E19503

Wiring diagrams

1

BN

BK

BU

L+

L

2

/ L+

L

13

/2 4

3

L

L+4

2

1

32:4:

4

BN

BU

L1

N

5

BN

BU

L+L1

LN

6

/1 3

/2 4

L1L+

LN

7

1

3

2

L1L+

LN

8

L+

L

1

4

3

9

4

L

L+1

2

32:4:

10

L+

L

1

4

3

11

L+

L

1

4

3

12

3

2

L1

N

L+

L

Inductive sensors

33www.ifm.com

Wiring diagrams

13

L+

L2

1

1

1: connection to NAMUR-amplifier

14

L+

L

BN

BK

BU

L+

L

BN

BK

15

L+

L

1

4

L+

L

1

4

3

16

WH

BK

L+

L L

BK

WH

L+

17

L+

L

/1 3

/2 4

L+

L/1 3

/2 4

18

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

DC PNP

L+

L

2

4

3

1

5

DC PNP

L+

L

19

L+

L1

4L+

L

1

4

Scale drawings - CAD download: www.ifm.com

1

LED

2316 4

2

LED

2717 3

3

LED

2715,4 4

4

16

LED

1823

M5x

0,5

2,7

8

Inductive sensors

34www.ifm.com


5

LED

3,5 27 6,5

6

LED 8

3,5

27

6,5

7

35

LED

M8x

1

413

2

8

27

LED

M8x

1

413

82

9

4

13

28,5

40

M8x

1

LED 4 x 90°

M8x

1

32,5

10

23

40

M8x

1

LED 4 x 90°

4

13

M8x

1

832,5

11

20 10

5M3

8

LED

40

520

IL 5003

4

IL 50021

1: sensing face

12

10,2

27,8

5,6

16

22,2

2,75

3,1

3,5

2,83,1

LED10,4

8

13

10,2

27,8

LED

5,6

165,1

22,2

2,75

3,1

3,5

2,83,1

LED

10,4

1440

6

12LED

4

2613

32

3,2 45

LED

3,2

18

1610

1

1: threaded insert M3, depth 5.8 mm, max. tightening torque 1.2Nm (screw fixing class 8.8) when brass insert in contact with counter-part.

15

40

10,4

45,6

LED

32

5,3

30

61,5

77

5,1

121101

LED

27

Inductive sensors

35www.ifm.com


16

40

13

7,35,3

4630

60

LED58

5,3

40118

LED

17

7,35,3

46

LED

30

60

137

LED58

5,3

40118

LED

29

40

18

9

18 7160

50

M12

x1

LED 174

19

9

18 716046

M12

x1

LED 174

4

20

24LED

801869

58

M18

x1

4

921

24LED

80186950

M18

x1

4

9

8

22

36

8167

59

5

M30

x1,5

9

18

LED

23

8167

5

1544

36

M30

x1,5

9

18

LED

24

40

LED

4661

30 20

5,4

105,

4 6

8,5

33

1/2"

20U

NF

2ALS

100

4066

17

34

25

40

M12

x1

4066

17

34

LED

4661

30 20

5,4

105,

4 6

16

33

Inductive sensors

36www.ifm.com


26

105

80

40

7,565

65

5,59,3 40

12

2718

LEDpot.

16

27

453432

M12

x1

174

M12

x1

LED 4 x 90°

28

32

M12

x1

174

5

M12

x1

3950

LED 4 x 90°

29

LED 4 x 90°

5970

50

M12

x1

174

M12

x1

30

45

M12

x1

174

5

M12

x1

5970

LED 4 x 90°

31

M18

x1

M12

x1

3033

4635

424LED 4 x 90°

32

M18

x1

M12

x1

2538

5140

424

10

LED 4 x 90°

33

M18

x1

M12

x1

4956,5

7059

424LED 4 x 90°

34

M18

x1

M12

x1

4058

70

LED 4 x 90°

60

10

424

35

39

33

M30

x1,5

37

50

M12

x1

LED 4 x 90° 5 36

36

39

19

M30

x1,5

37

50

M12

x1

LED 4 x 90° 5

15

36

37

59

53

M30

x1,5

57

70

M12

x1

LED 4 x 90° 536

Inductive sensors

37www.ifm.com


38

LED 4 x 90°

59

38

M30

x1,5

5

57

70

36

M12

x1

15

39

40

66

40

54

M12

x130

30 2

2

1

46

46

5,5

5,5

29,5

1: LED yellow, 2: LED green

40

40

66

40

54

M12

x130

30 2

5,5

5,5

1

2

46

46

29,5

1: LED yellow, 2: LED green

41

92

80

40

7,565

65

5,59,3

M12

x1

112

40

LED171

20

1: mounting on DIN rail

42

105

80

40

7,565

65

5,59,3

M12

x1

123

4012

2718

LEDpot.

16

43

M12

x1

174

M12

x1

5263

LED 4 x 90°

43

44

11

1015

42,5

60

5

M12 x12635

4,5

10,1

4,5

4

1510

68

20

1: Sensitivity, 2: Output function, 3: Pulse stretching time

45

11

1015

42,5

60

5

M12 x12635

4,5

15,1

4,5

4

1510

68

20


Inductive sensors

38www.ifm.com


46

11

1015

42,5

60

5

M12 x12635

4,5

20,1

4,5

4

1510

68

20


47

11

1015

42,5

60

5

M12 x12635

4,5

25,1

4,5

4

1510

68

20


48

11070

4,5 51

7080

M12

x1

LED

205

49

M8x1

1720

709

12

1345

3 5,5

1: sensing face, 2: LED operating status, 3: LED switching status

50

1720

70

M12

x1

12

1345

3 5,5

1: sensing face, 2: LED operating status

51

4940

M12

x1

174

M12

x1

LED 4 x 90°

60

52

58

50

M30

x1,5

5

57

70

36

M12

x1

LED 4 x 90°

53

40

66

40

54

M12

x130

30 2

46

46

5,5

5,5

LED

29,5

54

5950

M12

x1

174

M12

x1

LED

70

Inductive sensors

39www.ifm.com


55

45

M12

x1

174

5

M12

x159

70

LED

56M

18x1

M12

x1

5057

7059

424LED 4 x 90°

57

M18

x1

M12

x1

4057

70

LED 4 x 90°

59

10

424

58

5957

50

M18

x1

4

M12

x1

70

24LED 4 x 90°

59

40118

LED

M12

x1

139

13

7,35,3

46

30

60

LED58

5,3

40

60

60

LED 4 x 90°

4940

12

M12

x1

61

32

M12

x1

174

5

M12

x1

3950

LED 4 x 90°

62

5037

29

M12

x1

174

LED

63

5

614428

M12

x1

LED 4 x 90° 174

5

64

M18

x1

M12

x1

2538

5140

424

10

LED 4 x 90°

65

M18

x1

M12

x1

3956

70

LED 4 x 90°

59

10

424

66

5739,5

2933

LED4 x 90°

M18

x1

424

5

Inductive sensors

40www.ifm.com


67

6244,5

24

LED4 x 90°

38

M18

x1

424

10

68

39

18

M30

x1,5

37

50

M12

x1

LED 4 x 90° 5

15

36

69

38

M30

x1,5

57

70

LED4 x 90°

536

15

59

1/2"

-20U

NF-

2A

70

16

M30

x1,5

1535

5

42

LED 4 x 90°

59

5 36

71

31

M30

x1,5

35

5

42

LED 4 x 90°

59

365

72

112

35,5

20

120

LED

1

1: Combicon plug with screw terminals (optional)

Inductive sensors

41www.ifm.com

Capacitive sensors


Sensors for industrial applications, DC 45 - 45

Sensors for industrial applications, AC and AC/DC 45 - 46

Sensors for the detection of conductive media through a wall 46 - 47

Sensors for the detection of granulates 47 - 47

Sensors for the detection of granulates 47 - 47

Sensors with ATEX approval 47 - 48

Switching amplifiers with ATEX approval 48 - 48

Accessories 48 - 49




Capactive sensors for detection ofnon-metalic objects.

Sensing range adjustable by means of a potentiometer.

Plastic or metal housing for different applications.

Housing styles from M12 cylindricalto 105 x 80 mm block.

Assortment of tank and sight glassmounting acccessories.

Capacitive sensors

Capacitive sensors are used for the non-contact detection of any objects. In contrastto inductive sensors, which only detect metallic objects, capacitive sensors can alsodetect non-metallic materials. Typical applications are in the wood, paper, glass,plastic, food and chemical industries. In a packaging system, capacitive sensors moni-tor that the contents of a cardboard box is complete, for example, or check the pres-ence of non-metallic caps. Another application is to monitor the conveying of sheetsof glass on a roller conveyor.

Operating principle

The capacitance between the active electrode of the sensor and the electrical earthpotential is evaluated. An approaching object influences the electrical alternatingfield between these two “capacitor plates” and, consequently, the capacitance. Thisapplies to metallic and non-metallic objects. By means of the potentiometer or thepushbutton the user can set the sensitivity.

Increased noise immunity

When detecting objects, very small changes in capacitance must be evaluated andconverted into switching signals. This makes high requirements for the electronics.The sensors must be designed so that they are insensitive to fluctuations of theparasitic basic capacitances, as these can amount to a multiple of the change incapacitance to be measured. Moreover, the sensors must be insensitive to electro-magnetic interference which typically occur in the application area.

ifm electronic has developed future-oriented solutions to meet the high sensorrequirements. A patented circuit concept efficiently prevents the mentioned pro-blems and ensures reliable functioning for all relevant noise parameters.

Not only metal: Capacitive sensorsdetect almost allmaterials, herefor example a login a saw mill.

Capacitive sensors

44www.ifm.com

Sensors for industrial applications, DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 60 4 f high-grade st. steel 10...36 IP65 50 100 1 KF5001

M12 / L = 61 8 nf high-grade st. steel 10...36 IP65 50 100 2 KF5002


M30 / L = 81 15 nf PBT 10...36 IP65 40 250 3 KI5002


M30 / L = 81 15 nf PBT 10...36 IP65 40 250 3 KI5001


M30 / L = 90 8 f high-grade st. steel 10...36 IP65 / IP67 10 100 4 KI5085

M30 / L = 90 15 nf high-grade st. steel 10...36 IP65 / IP67 10 100 5 KI5087


M30 / L = 90 8 f high-grade st. steel 10...36 IP65 / IP67 10 100 4 KI5084


105 x 80 x 40 60 nf modified PPO 10...36 IP65 10 250 6 KD5018


Sensors for industrial applications, AC and AC/DC

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.


M18 / L = 84 8 nf PBT 20...250 IP67 25 / 50 350 / 100 7 KG0009*


M18 / L = 84 8 nf PBT 20...250 IP67 25 / 50 350 / 100 7 KG0010*

Capacitive sensors

45www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.


M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 3 KI0016*


M30 / L = 81 15 nf PBT 20...250 IP65 25 / 40 250 3 KI0020*


105 x 80 x 40 60 nf modified PPO 20...250 IP65 10 250 6 KD0009*




Sensors for the detection of conductive media through a wall

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Cable 2 m · Output function · 1x open collector with automatic load detection (DC PNP or DC NPN) · Wiring diagram no. 13

20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 8 KQ6001

Cable 2 m · Output function · 1x open collector DC PNP · Wiring diagram no. 6

20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 8 KQ6002

Cable with connector 0.04 m · Output function · 1x open collector with automatic load detection (DC PNP or DC NPN) · Wiring diagram no. 10

20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 8 KQ6003

Cable with connector 0.04 m · Output function · 1x open collector DC PNP · Wiring diagram no. 1

20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 8 KQ6004

Capacitive sensors

46www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

Cable with connector 0.1 m · Output function · 1x open collector DC PNP · Wiring diagram no. 1

20 x 14 x 48 12 nf PBT 10...36 IP65 / IP67 10 100 8 KQ6005


Sensors for the detection of granulates

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M18 / L = 87 12 nf PBT 10...36 IP65 / IP67 10 200 9 KG5065

M30 / L = 90 20 nf PBT 10...36 IP65 / IP67 10 200 10 KI5082


Sensors for the detection of granulates

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.

1/2“ UNF-Connector · Output function · AC/DC · Wiring diagram no. 7

M30 20 nf PBT 20...250 IP65 / IP67 10 150 11 KI0054*




Sensors with ATEX approval

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 8

M30 / L = 81 15 nf PBT 8.2 DC 7.5...15 375 1 40 3 KI5030

Capacitive sensors

47www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

Cable 2 m · Output function · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 9

M34 / L = 92 15 nf brass 8.2 DC 7.5...15 375 1 40 12 KX5001


Switching amplifiers with ATEX approval

Type Ub

[V]


f

[Hz]

Ta

[°C]


Orderno.

24 / < 50 5000 -20...602 transistor outputs PNP (100 mA,


24 / < 50 5000 -20...602 outputs (optocoupler, bipolar, 100 mA,


24 / < 50 5000 -20...602 transistor outputs PNP (100 mA,


Accessories






Locknut · G 1¼ · for mounting adapter · Housing materials: PVDF E11030

Locknut · G 1½ · for mounting adapter · Housing materials: POM E11031

Locknut · G 1½ · for mounting adapter · Housing materials: PVDF E11032

Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: POM / EPDM E11033

Capacitive sensors

48www.ifm.com


Mounting adapter · M30 x 1.5 - G 1½ · Housing materials: PVDF / EPDM E11034

Mounting adapter · M30 x 1.5 - G 1¼ · Housing materials: PVDF / EPDM E11036

Protective cover · G 1¼ · for mounting adapter · Housing materials: PES black transparent E11078


E20718


E20870

Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: diecast zinc

E20873

Mounting set · Ø 30.2 mm · Clamp mounting · free-standing M12 · for type OI, II, KI · Housing materials: fixture: stainless steel316Ti / 1.4571 / clamp: stainless steel

E20874

Mounting adapter · M18 x 1 - G ¾ · Housing materials: PVDF E43901

Locknut · G ¾ · for mounting adapter · Housing materials: PVDF E43903

Wiring diagrams

1

L+

L

1

4

3

2

BN

BK

BU

L+

L

3

BN

BK

BU

L+

L

4

BN

BU

L+L1

LN

5

BN

BU

L+L1

LN

6

BN

BK

BU

L+

L

7

2

3

L1

N

L+

L

8

+BN

BU

Capacitive sensors

49www.ifm.com

Wiring diagrams

9

BN

GN/YE

BU+

10

L+

L

1

4

3

L+

L

1

4

3

11

2

4

3

1

5

L+

L

2

4

3

1

5

L+

L

12

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

AC;DC NPN

L+N

LL1

2

4

3

1

5

DC PNP

L+

L

2

4

3

1

5

DC PNP

L+

L

13

L

L+BN

BK

BU L

L+BN

BK

BU


1

40,238,2

M12

x1

M12

x1

59,8

1 2

1: LED 4 x 90°, 2: with pot.

2

34,6

M12

x1

5

M12

x1

41,661,2

1 2

1: LED 4 x 90°, 2: with pot.

3

36

8159

5

M30

x1,5

9

18pot.LED

4

60

M30

x1,5

7790

LED (4 x 90°) 5

M12

x 1

361

1: Programming buttons

Capacitive sensors

50www.ifm.com


5

60

M30

x1,5

7790

LED (4 x 90°) 5

M12

x 1

361

15


6

105

80

40

7,565

65

5,59,3 40

12

2718

LEDpot.

16

7

24

58

4

84

M18

x1

pot.LED LEDpot.

8

3,2

48

3343,7

2

5,5 3

13,4

14

20

121

1: Programming buttons, 2: sensing face

9

24

7756

M18

x1

4

M12

x1

87

1 2

1: LED ring, 2: Programming buttons

10

61

M30

x1,5

8090

5

M12

x 1

3621


11

6180

90

5

M30

3621

1/2"

UN

F


12

822040

M34

x1,5

10

541

LEDpot.

13

112

35,5

20

120

LED

1

1: Combicon plug with screw terminals (optional)

Capacitive sensors

51www.ifm.com

Magnetic sensors


Sensors for industrial applications 55 - 55

Sensors for hygienic and wet areas 55 - 55

Accessories 55 - 56




Detection also through non-magnetisable metals.

Small designs with very long sensing ranges.

Cylinder and rectangular designs for demanding applications.

Wide temperature range for universal use.

Can be used either flush or non-flush mounted in metal.

Magnetic sensors

Magnetic sensors are used for the detection of positions without contact or wear andtear in control technology. They are used where inductive sensors reach their limits.The advantage: compared to inductive sensors magnetic sensors have a considerablyhigher sensing range and smaller housings.

Since magnetic fields penetrate all non-magnetisable materials, the sensors candetect magnets through walls made of non-ferrous metal, stainless steel, aluminium,plastic or wood.

In gate systems, for example, the magnet sensor only detects the magnet which is tobe detected. Any possible influences by aluminium in the environment do not impactthe sensor.

In the food industry the magnetic sensor is often used in connection with pigs(cleaning devices which pass through the inside of pipes). By means of magneticsensors their exact position can be detected from the outside through the wall of thestainless steel pipe.

Operating principle

Magnetic sensors from ifm electronic use state-of-the-art GMR (Giant MagnetoResistive effect) technology. The measuring cell consists of resistors with severalextremely fine, ferromagnetic and non-magnetic layers. Whereas in a conventionalWheatstone bridge circuit two screened and two unscreened GMR resistors arecombined, a large signal proportional to the magnetic field is produced if a magneticfield is present. As from a defined threshold value an output signal is switched via acomparator.

Installation

Magnetic sensors can be mounted flush with all materials (even metals) withoutreduction in the sensing range. Depending on the orientation of the magnetic fieldthe sensor can be damped from the front or from the side.

The sensor switchesas soon as themagnet has reachedthe switch-on point. The direction ofmovement is notimportant.

Magnetic sensors

54www.ifm.com

Sensors for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M8 / L = 50 60 V4A (316S12) 10...30 IP67 5000 200 1 ME5011

M12 / L = 50 60 stainless steel 10...30 IP67 5000 200 2 MFS201


M8 / L = 60 60 V4A (316S12) 10...30 IP67 5000 200 3 ME5010

Cable 2 m · Output function · DC NPN · Wiring diagram no. 3




M18 / L = 60 70 stainless steel 10...30 IP67 5000 200 5 MGS200


M18 / L = 50 70 stainless steel 10...30 IP67 5000 200 6 MGS201

Sensors for hygienic and wet areas

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 60 60 V4A (316S12) 10...30 IP68 / IP69K 5000 200 4 MFT200

M18 / L = 60 70 V4A (316S12) 10...30 IP68 / IP69K 5000 200 5 MGT200

Accessories



Magnetic sensors

55www.ifm.com







E20718


E20870

Wiring diagrams

1

BN

BK

BU

L+

L

2

L+

L

1

4

3

3

L

BN

BK

BU

L+


1

4050

M8x

1

4

13LED

2

5029

M12

x1

4LED

17

3

4552

M8x

1

4

13

M8x

1

LED 4 x 90°

60

4

4940

M12

x1

174

M12

x1

LED 4 x 90°

60

Magnetic sensors

56www.ifm.com


5

24

4947

40

M18

x1

4

M12

x1

60

LED 4 x 90°

6

24

504340

M18

x1

2LED

4

Magnetic sensors

57www.ifm.com

Cylinder sensors


T-slot sensors for industrial applications 61 - 61

T-slot sensors for hygienic and wet ares 61 - 61

Sensors for short-stroke cylinders 62 - 62

Sensors for short-stroke cylinders for hygienic and wet areas 62 - 62

Non flush C-slot sensors for industrial applications 62 - 62

Accessories 63 - 64




Self-clamping fixture for easy adjustment and quick mounting.

Convenient: can be easily inserted into the slot from the top.

Suitable for almost all C and T slots.

Unit versions available with connection cable and M8 / M12 cable plug.

Wide selection of adapter accessories.

Cylinder sensors

Cylinder sensors are used for position detection of pistons in pneumatic cylinders.They are directly mounted onto the cylinder. The ring magnet attached to the pistonis sensed through the housing wall of non-magnetisable material (e.g. aluminium,brass or stainless steel). ifm electronic offers a standard solution for different cylindertypes and manufacturers.

Operating principle

ifm’s cylinder sensors use state-of-the-art GMR and AMR technology: A GMRelement is made up of extremely thin magnetic layers, each separated by a non-magnetic layer. Without external field they align in an antiparallel manner whichresults in a defined electrical resistance. If these layers are exposed to a magneticfield, the magnetic layers align in a parallel manner. This results in a large change inresistance that is converted into a switching signal by the internal electronics.

An AMR element consists of thin ferromagnetic layers. Electrical resistance is highestwithout external magnetic fields. The effect of a magnetic field reduces resistance.This change is converted into a switching signal by the internal electronics. Advan-tage: this method enables exact measurement of even very small changes of themagnetic field where space is extremely limited. This results in a smaller hysteresisand a short travel distance. So, the sensors can be used wherever exact positioning isrequired (e.g. short-stroke cylinder).

Response sensitivity

The response sensitivity applies equally to either magnetic polarity and without exter-nal field influence. The magnetic flux density in most pneumatic cylinders is between5 and 25 millitesla (mT). ifm electronic’s cylinder sensors are factory set so that theydetect these magnetic fields safely.

Travel distance

The travel distance describes the section which is covered by the magnet in thesensing zone. It depends on the strength of the magnet. The short response times ofthe sensors allow very high travel speeds.

Position sensing:Cylinder sensorsmonitor the positionof the piston in apneumatic cylinder.

Cylinder sensors

60www.ifm.com

T-slot sensors for industrial applications

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 1 MK5101






Cable 2 m · Output function · DC PNP/NPN · Wiring diagram no. 3

25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP67 100 -25...85 4 MK5103



Cable with connector 0.3 m · Output function · DC PNP/NPN · Wiring diagram no. 4

25 x 5 x 6.5 PA (polyamide) 10...30 4000 IP67 100 -25...85 1 MK5104

T-slot sensors for hygienic and wet ares

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


25 x 5 x 6.5 PA (polyamide) 10...30 > 10000 IP67 / IP69K 100 -25...85 4 MK5110



Cylinder sensors

61www.ifm.com

Sensors for short-stroke cylinders

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.






Sensors for short-stroke cylinders for hygienic and wet areas

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.



Non flush C-slot sensors for industrial applications

Type Dimensions

[mm]

Material Ub

[V]

f

[Hz]

Protection Iload

[mA]

Ta

[°C]

Draw-ingno.

Orderno.


17.5 x 2.8 x 7.7 PA (polyamide) 10...30 > 10000 IP67 100 -25...85 10 MK5300

Cable 2 m · Output function · DC NPN · Wiring diagram no. 5








Cylinder sensors

62www.ifm.com

Accessories


Fixing strap for clean-line cylinders · Piston diameter · Ø 8...12 mm · Piston diameter 8...12 mm · for type MKT · Housing materials:stainless steel

E11816

Fixing strap for clean-line cylinders · Piston diameter · Ø 16...20 mm · Piston diameter 16...20 mm · for type MKT · Housingmaterials: adapter: PA / Fixing strap: stainless steel

E11817

Fixing strap for clean-line cylinders · Piston diameter · Ø 25...32 mm · Piston diameter 25...32 mm · for type MKT · Housingmaterials: adapter: PA / Fixing strap: stainless steel

E11818

Fixing strap for clean-line cylinders · Piston diameter · Ø 40 mm · Piston diameter 40 mm · for type MKT · Housing materials:adapter: PA / Fixing strap: stainless steel

E11819


E11820


E11821


E11822


E11823

Adapter for clean-line cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: stainless steel E11877

Adapter for tie rod / integrated profile cylinders · for types MKT (T-slot cylinder sensors) · Clamping range 5...11 mm · Housingmaterials: aluminium / screw: stainless steel

E11797


E11799


E11801

Adapter for trapezoidal slot cylinders · for types MKT (T-slot cylinder sensors) · Housing materials: aluminium alloy / set screw:stainless steel

E11796

T-slot adapter for C-slot sensor · for types MKC (C-slot cylinder sensor) for installation in T-slot cylinders · for types MKC · (height 5mm) · Housing materials: diecast zinc / fixing element: stainless steel

E11928

Cylinder sensors

63www.ifm.com


T-slot adapter for C-slot sensor · for types MKC (C-slot cylinder sensor) for installation in T-slot cylinders · for types MKC · (height 7.7mm) · Housing materials: diecast zinc / fixing element: stainless steel

E11914

T-slot cylinder memorisation block · for types MKT (T-slot cylinder sensors) · Housing materials: PA / stainless steel E11798

C-slot cylinder memorisation block · for types MKC (C-slot cylinder sensors) · Housing materials: PA / stainless steel E12004

Clip · for types MKT (T-slot cylinder sensors) · Piston diameter 16 mm · Housing materials: POM / fixture: aluminium / screw: stainlesssteel

E11958


E11959


E11960


E11961


E11958


E11959

Wiring diagrams

1

L+

L

1

4

3

2

BN

BK

BU

L+

L

3

L

BN

BU

L+

4

L+

L

1

4

5

L

BN

BK

BU

L+

6

L+

L

1

4

3

Cylinder sensors

64www.ifm.com


1

L

25

5

LED

2

1

M8x

1

37 6,5

5,1

1: Fastening clamp, 2: sensing face

2

M8x

1

L

6,5

5,1

25

5LED

2

141,5


3

L

M12

x1

25

5

LED

2

1556,5

5,1


4

6,5

5,1

25

5

LED

2

1


5

L

M12

x1

25

5

LED

2

1556,5

5,1


6

6,5

5,1

25

5

LED1

2


7

L

6,5

5,1

25

5

1

M8x

1

37

2

LED


8

L

M12

x1

25

5

LED155

2

6,5

5,1


9

6,5

5,1

25

5

1

2

LED55

L

M12

x1


10

17,5

7,7

2,84,8

1

4,2LED

2


11

M8x

1

L

37

17,5

7,7

LED2,

84,8

1 2

4,2


12

L

M8x

1

41,5

17,5

7,7

LED

2,84,8

1 2

4,2


Cylinder sensors

65www.ifm.com

Safety technology


Fail-safe inductive sensors for series connection to IEC62061 SILcl 3 and ISO13849-1 PL e 69 - 69

Fail-safe inductive sensors, 2 x OSSD, to IEC62061 SILcl 2 and ISO13849-1 PL d 69 - 69

Fail-safe inductive sensors, 2 x OSSD, to IEC62061 SILcl 3 and ISO13849-1 PL e 69 - 70

Safety relays for fail-safe sensors 70 - 70

Accessories 70 - 70




Certified to IEC 61508,SIL 2 / SIL 3 and ISO 13849-1 PL d / e.

Safety monitoring of persons and machines.

No coded target required for electronic fail-safe sensors.

Connection of the sensors to safety PLCs, bus systems and switching devices possible.

Series connection of sensors and contacts.

Safety technology

Safety technology in automation has a share of the responsibility for safe human-machine interaction. Fail-safe sensors with safety functions are an important part ofa safety system for persons and machines. For the first time, the operating principleand thus the advantages of inductive sensors can also be used for safety applications.Direct detection of metal solves new applications. Up to now magnetic or mechani-cal counterparts had to be considered in the design. The wear-free non-contactsensing principle and a high protection rating ensure high plant uptime.

Connection and evaluation

No special demands such as shielding, twisted cables or laying separately, are madeon the socket. The sensor is directly connected to existing PLCs or logic modulesusing common existing unshielded 4-pole cables.

The input and output signals of the sensors correspond to DIN EN 61131-2. They aretherefore fully compatible with the inputs and outputs of a PLC. Connection to ifmsafety relays, AS-i Safety at Work, PROFIsafe, Interbus Safety bus systems or safe PLCsand logic modules is equally simple. For the unit family with dynamic pulse detectionthe corresponding software modules are required.

The fail-safe sensors with 2 x PNP output can be connected to approved two-channelsafety relays without cross-monitoring that are suitable for plus-switching non-contact guards. The safety relays from ifm electronic enable functionalities such astwo-hand controls to EN 574 or connection of e-stop devices to DIN EN 574-5-1without extra cost.

Operating principle of intelligent electronic fail-safe sensors

A magnet or coded target is no longer necessary for the function of the fail-safe sen-sor. The fail-safe inductive sensor detects metals such as stainless steel or mild steel.The fail-safe sensor operates with an enable zone which is monitored for targetposition and dwell time.

Limitation of the axisareas of a robot moni-tored by the GG505S.

Connection of thesensors to safety plcs,

bus systems andrelays possible.

Safety technology

68www.ifm.com

Fail-safe inductive sensors for series connection to IEC62061 SILcl 3 and ISO13849-1 PL e

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]

Protection Response timeon removal /

approach [ms]

Draw-ingno.

Orderno.

M12 connector · Wiring diagram no. 1

91 3...6 nf high-grade st. steel / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 1 GG505S

91 1...4 f MS / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 2 GG507S

80 6...12 nf V4A / PEEK 19.2...30 IP 68 / IP 69K < 20 / < 200 3 GI505S

80 6...12 V4A / PEEK 19.2...30 IP 69 K < 20 / < 200 3 GI506S

66 10...15 f PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 4 GM504S

66 10...20 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 4 GM505S


Fail-safe inductive sensors, 2 x OSSD, to IEC62061 SILcl 2 and ISO13849-1 PL d

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]


approach [ms]

Draw-ingno.

Orderno.


70 0.5...4 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 20 / < 200 5 GF711S

70 1...8 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 20 / < 200 6 GG711S

70 1...15 nf high-grade st. steel / PBT 19.2...30 IP 65 / IP 67 < 20 / < 200 7 GI711S

70 1...10 f MS / PBT 19.2...30 IP 65 / IP 67 < 20 / < 200 8 GI712S


Fail-safe inductive sensors, 2 x OSSD, to IEC62061 SILcl 3 and ISO13849-1 PL e

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]


approach [ms]

Draw-ingno.

Orderno.


80 6...12 nf high-grade st. steel / PBT 19.2...30 IP 68 / IP 69K < 20 / < 200 3 GI701S

Safety technology

69www.ifm.com

Type Length

[mm]

Enablezone[mm]

Housingmaterial

UbDC[V]


approach [ms]

Draw-ingno.

Orderno.


66 10...15 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 4 GM701S

– 4...20 nf PPE / diecast zinc 19.2...30 IP 65 / IP 67 < 20 / < 200 4 GM705S


Safety relays for fail-safe sensors

Type Ub

[V]

Sensorinput /output

Safety-relatedoutput

Signalcontacts

(NC)

Feedbackcontacts

Responsetime[ms]

Offdelay[ms]

Draw-ingno.

Orderno.

24 DC (19.2...30 DC)

1/2 2 1 1 < 180 – 9 G1501S

24 DC (19.2...30 DC)

– – – – – – 10 G1502S

Accessories


Combicon connector · with screw terminals 4-pole · Housing materials: PA / current carrying parts: copper alloy tin-plated · Packquantity: 5

E11929

Wiring diagrams

1

(BK)

3

1

4

2

L+

L

(BN)

A

TE

(BU)

(WH)+24 V

OUT

GND

IN

1

1: Control monitor G1500x or PLC (to EN 61131-2)

2

(BK)

3

1

4

2

L+

L

(BN)

A2

A1

(BU)

(WH)+24 V

IN1

GND

IN2

1


1

M18

x1

55 10

M12

x1

90,5

LED 8 x 45°

79

424

2

65

M12

x1

LED 8 x 45°

90,5

424

M18

x1

Safety technology

70www.ifm.com


3

LED 4 x 90°

69

39

M30

x1,5

5

67

80

36

M12

x1

15

4

40

M12

x1

4066

17

34

LED

4661

30 20

5,4

105,

4 6

8,5

33

5

45

M12

x1

174

5

M12

x1

5970

LED

6

35

M12

x1

LED 2 x 180°

70,5

M18

x1

57

424

10

7

LED 4 x 90°

M30

x1,5

5

45

70

36

M12

x1

15

57

8

LED

M30

x1,5

5

45

70

36

M12

x1

57

9

35,5

25

100

LED

105

1: Combicon connector with screw terminals

10

105

35,5

114

LED

50

Safety technology

71www.ifm.com

Valve sensors


Sensors for industrial applications 75 - 76

Sensors for industrial applications, AS-i system 76 - 76

Sensors with ATEX approval 1G/2G and 1D 76 - 77

Sensors with ATEX approval 3D and / or 3G 77 - 77

Sensors for rising stem valves 77 - 77

Accessories 78 - 80




Dual inductive feedback sensors forvalves and actuators.

Straightforward fit to standard actuators.

Compact, weatherproof andlow maintenance.

Optional back wiring option for localsolenoid control.

Versions for network, hazardous areaand conventional wiring.

Valve sensors

In industrial processes where liquids, air or gases are used valves are needed fordosing and control. There is a wide variety of valve types; butterfly or ball valvesbeing the most common quarter-turn types.

These valves are seldom operated manually. Pneumatic valve actuators are normallyused for mechanical positioning. The valve position must be monitored electroni-cally.

Mechanical switches are still often used for position feedback on the actuator shaft.For other solutions several proximity sensors are used together with a switch targetfor position detection. Disadvantage: Mounting is mechanically complex. Duringswitch mounting the signal wires can be reversed when they are connected in thetop-mounted junction box. Where there are temperature fluctuations condensinghumidity leads to corrosion and thus malfunction.

Operating principle

An innovative design eliminates the disadvantages of these conventional solutions. In1992 ifm electronic developed a standard which is now used by many leading actua-tor manufacturers. A round switch target, known as a “puck”, with two metalscrews offset by 90° is mounted on the actuator shaft. The screws are located at adifferent height. A compact dual proximity switch (type IND) with two integral sen-sors detects the upper or lower metal screw depending on the valve position andthus the two switch positions.

Due to the simple construction the system operates safely with no wear at all. It isvirtually resistant to external influence and meets the protection rating IP 67. Undercertain conditions the unit can even be self-cleaning. The sensors are also resistant tomechanical stress such as vibration and shock.

Special design AS-i (T5)

An extended design is the series T5. In addition to the inductive dual sensor, the unitprovides an integrated connection for the solenoid valve. The connection to thecontrol unit is made via a two-wire AS-i cable. The asset: Up to 30 other units can beconnected to this line and separately controlled via the AS-i master.

Feedback: Monitoringof pneumatic and

manual valves mustbe possible.

Valve sensors

74www.ifm.com

Sensors for industrial applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.


40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5251


40 x 26 x 26 4 nf PC (polycarbonate) 10...36 IP67 1300 250 1 IN5304


40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 1 IN5323


40 x 26 x 40 4 nf PBT 20...250 IP67 25 / 50 350 / 100 2 IN0110*


40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 3 IN5224


40 x 26 x 47 4 nf PBT 10...36 IP67 250 250 4 IN5331


40 x 26 x 47 4 nf PBT 10...36 IP67 1300 250 4 IN5327


40 x 26 x 26 4 nf PBT 10...36 IP67 1300 250 5 IN5285

M18 connector · Output function · AC/DC · Wiring diagram no. 5

40 x 26 x 40 4 nf PBT 20...250 IP67 25 / 50 350 / 100 6 IN0108*

Rd 24 x 1/8 connector 6 pins · Output function · DC PNP

40 x 26 x 60 4 nf PBT 10...36 IP67 1300 250 7 IN5334

Valve sensors

75www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.


33 x 60 x 92 4 nf PA (polyamide) 10...30 IP67 500 100 8 IN5409




Sensors for industrial applications, AS-i system

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

M12 connector · 1 x 2 inputs · Wiring diagram no. 6

55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP67 – – 9 AC2315

M12 connector · Output function transistor PNP · 2 inputs / 1 output


M12 connector · Output function transistor PNP · 2 inputs / 2 outputs



Sensors with ATEX approval 1G/2G and 1D

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 7

40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 11 NN5008

Cable 2 m · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 8

40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 1 NN5009

Cable 10 m · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 8

40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 140 1800 1 NN5011

Valve sensors

76www.ifm.com

Type Dimensions

[mm]

Sensingrange[mm]


[V]

Ub

[V]

Internalcapacit.

[nF]

Internalinductance

[μH]

f

[Hz]

Draw-ingno.

Orderno.

M18 connector · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW · Wiring diagram no. 9

40 x 26 x 26 4 nf PBT 8.2 DC 7.5...15 DC 140 130 1800 5 NN5013

Rd 24 x 1/8 connector 6 pins · Output function 2 x normally closed · Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW

40 x 26 x 60 4 nf PBT 8.2 DC – 150 150 250 7 N95001

40 x 26 x 60 4 nf PBT 8.2 DC – 100 150 1300 7 N95002


Sensors with ATEX approval 3D and / or 3G

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

M12 connector · Output function transistor PNP · 2 inputs / 2 outputs

55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 IP5X – – 10 AC317A

M12 connector · Output function transistor PNP · 2 inputs / 1 output


55 x 60 x 35 4 PBT (Pocan) 26.5...31.6 IP67 – – 12 AC326A

M12 connector · 1 x 2 inputs · Wiring diagram no. 6



40 x 26 x 47 4 PBT 10...30 IP67 1300 100 13 IN507A


Sensors for rising stem valves

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection fAC / DC

[Hz]

IloadAC / DC

[mA]

Draw-ingno.

Orderno.

Cable with connector 0.3 m · Output function 3 x normally open · DC PNP · Wiring diagram no. 10

65 x 52 x 110 0...80 PA 18...36 IP65 / IP67 – 100 14 IX5010

Valve sensors

77www.ifm.com

Accessories


Spacer · 10 mm · for compensation between target pucks and dual sensor IND · Housing materials: PBT E10579



Target puck · Ø 53 mm · Adjustable between 0° and 360° · Housing materials: Target puck: PVC / screws: high-grade stainless steel E10661

Mounting adapter · for Kieselmann seat valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 1.4404 E12123

reinforcement bracket · for type IND · Housing materials: stainless steel 316Ti / 1.4571 E11310

Mounting adapter · for Alfa Laval valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 316L / 1.4404 E11900

Mounting adapter · for Südmo valves · accessory for IX · Housing materials: adapter: PA / Target: stainless steel 316L / 1.4404 E11989

Mounting adapter · for Georg Fischer diaphragm valve Diastar with mounting kit M12 · accessory for IX · Housing materials: adapter:POM / Target: stainless steel

E12009

Mounting adapter · for Georg Fischer diaphragm valve Diastar with mounting kit M16 · accessory for IX · Housing materials: adapter:POM / Target: stainless steel

E12010

Mounting adapter · IX / Ø 30 mm · for Gemü actuators with mounting kit · accessory for IX · Housing materials: adapter: POM /Target: stainless steel

E12042

Mounting adapter · IX / Ø 45 mm · for Gemü actuators with mounting kit · accessory for IX · Housing materials: adapter: POM /Target: stainless steel

E12043

Target puck · Ø 53 mm · 6 possible switching flag positions · with drain holes · Housing materials: Target puck: PA 6 / screws: high-grade stainless steel

E17105

Target puck · Ø 53 mm · Housing materials: Target puck: PBT / screws: high-grade stainless steel E17118

Valve sensors

78www.ifm.com


Target puck · Ø 65 mm · Housing materials: Target puck: PVC / screws: high-grade stainless steel E17148

Target puck · Ø 55 mm · Inverted function · Housing materials: Target puck: PVC / screws: high-grade stainless steel / Metal ring:stainless steel

E17205

Target puck · Ø 53 mm · 8 possible switching flag positions · with drain holes · Housing materials: Target puck: PA 6 / screws: high-grade stainless steel

E17294

Target puck · Ø 53 mm · Housing materials: Target puck: PA 6 / screws: V2A E17320

Target puck · Ø 53 mm · Housing colour: black · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A

E17321

Target puck · Ø 53 mm · Housing colour: blue · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A

E17322

Target puck · Ø 53 mm · Housing colour: red · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A

E17323

Target puck · Ø 65 mm · Housing colour: black · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A

E17324

Target puck · Ø 65 mm · Housing colour: blue · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A

E17325

Target puck · Ø 65 mm · Housing colour: red · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws:V2A

E17326

Target puck · Ø 65 mm · Housing materials: Target puck: PA 6 / screws: V2A E17327

Target puck · Ø 102 · Housing materials: Target puck: PA 6 / screws: V2A E17328

Target puck · Ø 102 · Housing colour: black · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17329

Target puck · Ø 102 · Housing colour: blue · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17330

Valve sensors

79www.ifm.com


Target puck · Ø 102 · Housing colour: red · 8 possible switching flag positions · Housing materials: Target puck: PA 6 / screws: V2A E17331

protective housing · Accessory for valve sensors · for type IND · Housing materials: stainless steel E11984

Wiring diagrams

1

L

L+BK

WH

BN

BUWH:BK: A1

A2

2

BN

BU

L+L1

LN

WHL+L1

BK

LNBU:

BK: A1A2

3

L

L+

L+

L

2 WH

1 BN

4 BK

3 BU

4

L

L+

3 BU

2 WH

4 BK

1 BN

2:4: A1

A2

5

L+L1

LNL+L1

LN

1

2

4

33:4: A1

A2

6

AS-i+1

3 AS-i

7

Out 1

3 BU

2 WH

4 BK

1 BN L+ 1

L+ 2

Out 2

1


8

Out 1BK

BU

WH

BN L+ 1

L+ 2

Out 21


9

Out 24 BK

2 BU

3 WH

1 BN L+ 1

L+ 2

Out 1

1


10

L+

L

1

5

4

2

3

11

L

L+

L+

L

2:1: A1

A2

2 WH

1 BN

4 BK

3 BUL

L+

L+

L

3:4: A1

A2

2 WH

1 BN

4 BK

3 BU

NPNPNP

12

L

L+2

4

1

34:2:

A2A1

6

7

8

5 IN +

IN -

OUT +

OUT -

1: solenoid valve

Valve sensors

80www.ifm.com


1

402613

9LED

A1

A2 6,5

LED

8,54 26

4,55,

530

2

40

2613

9LED

A1

A2 6,5

LED

8,54 40

4,5

5,5

30

3

40

2613

M12

x1

8,526

4,5

5,5

30

40

9LED

A1

A2 6,5

LED

4

40

2613

9LED

A1

A2 6,5

LED

8,526

4,5

5,5

30

47

M12

x1

5

40

2613

9LED

A1

A2 6,5

LED

8,526

4,5

5,5

30

49

M18

x1

6

40

2613

9LED

A1

A2 6,5

LED

8,540

4,5

5,5

30M18

x1

67

7

M12

x1

4055

60

Rd24x1 8

78

30 2635

1

1: field connection

8

33

92

6,3

18,8

60

7,5

5,5

3060M

20x1

,5

1: sensor 1, 2: sensor 2, 3: LED OUT 1, 4: LED OUT 2

9

2635

LEDM12 x1

4055

LEDLED

60

13 12

1: sensor 1, 2: sensor 2

Valve sensors

81www.ifm.com


10

2635

LEDM12 x1

M12

x1

4055

LEDLED

60

13 12


11

40

2613

9LED

A1

A2 6,5

LED

M12

x1

8,526

4,5

5,5

30

40

12

M12

x1

M12 x1

4055

LED

LED

60

132

105

30

42

M5

13

3050,7

106 34,65,5

8,5 1

M12

x1

8,526

4,5

5,5

30

47

1: protective housing

14

52

3 LED 4

65

110

99,6

26

80

34,838

6,2

4,5

26,5 15

,5

3

4,3

88,6

1: Measuring distance, 2: Max. spindle stroke , 3: Initial value of themeasuring range (zero point) , 4: Programming buttons

Valve sensors

82www.ifm.com

Valve sensors

83

Photoelectric sensorsinfrared / redlight


Cylindrical housing OG (M18) BasicLine DC 87 - 87

Cylindrical housing OG (M18) PerformanceLine DC 87 - 88

Cylindrical housing OG (M18) WetLine for hygienic and wet areas 88 - 89

OG housing with rectangular housing 89 - 89

Cylindrical housing OG (M18) BasicLine AC/DC 90 - 90

Rectangular housing OH for industrial applications 90 - 90

Rectangular housing OJ PerformanceLine, lateral sensing face 91 - 91

Rectangular housing OL for industrial applications 91 - 91

Rectangular housing O5 BasicLine 92 - 92

Rectangular housing O5 PerformanceLine 92 - 92

Rectangular housing O4 BasicLine 93 - 93

Rectangular housing O4 PerformanceLine 93 - 93

Accessories 94 - 95




Photocells for general purposes andfor harsh environments.

Visible red and infrared light sources.

Long ranges and accuratebackground suppression.

Choice of standard industrial andhigh performance units.

Accessories for simple fitting andextra mechanical protection.

Photoelectric sensors: infrared / redlight

Automation technology can no longer be imagined without photoelectric sensors as“artificial eyes”. They are used where safe and non-contact detection of the exactposition of objects is required. The material of the objects to be detected is of noimportance. Compared to proximity sensors photoelectric sensors have a muchhigher sensing zone.

Through-beam sensors

A through-beam sensor is distinguished by a long range. The system consists of twoseparate components: a transmitter and a receiver. The light only travels one way(from the transmitter to the receiver). Adverse effects in the applications, such asdust in the air, dirt on the lenses, steam or mist do not immediately interfere with thesystem. This is called a high insensitivity to dirt or a high excess gain.

Retro-reflective sensors

For a retro-reflective sensor the transmitter and receiver are incorporated into onehousing. By means of a reflector the transmitted light is returned to the receiver. Anobject in the beam path interrupts the beam and triggers a switching operation.Retro-reflective sensors without polarisation filter operate in the infrared area,systems with polarisation filter with visible red light. Compared to through-beamsensors, retro-reflective sensors have an average excess gain.

Diffuse reflection sensors

A diffuse reflection sensor is used for the direct detection of objects. Transmitter andreceiver are incorporated into one housing. The transmitter emits light which isreflected by the object to be detected and seen by the receiver. This system evaluatesthe reflected light of an object. Reflectors are not necessary for operation.

Fixing options

ifm electronic offers a complete component system of easy-to-use mounting sets.The solutions consist of a clamp which is fastened with only one screw, keeps thesensors safely in place and at the same time guarantees free movement in all axes.

The reflector reflectsthe light beam: For aretro-reflective sensortransmitter and re-ceiver are integratedinto one housing.

Artificial eyes: Photo-electric sensors are

used to detect posi-tions in automation

technology.


86www.ifm.com

Cylindrical housing OG (M18) BasicLine DC

Type Operating principle Sensingrange

Spot Ø atmax.range[mm]

OutputH = light-onD = dark-on

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OGE M18 x 1 · M12 connector · plastics · DC

Receiver 8 m – D PNP 10...30 1 1 OGE100

Receiver 8 m – H PNP 10...30 2 1 OGE101

Through-beam sensor · Type OGS M18 x 1 · M12 connector · metal · DC

Transmitter 8 m 600 – 10...30 3 1 OGS100

Through-beam sensor · Type OGE M18 x 1 · M12 connector · high-grade stainless steel · DC


Through-beam sensor · Type OGS M18 x 1 · M12 connector · high-grade stainless steel · DC


Retro-reflective sensor · Type OGP M18 x 1 · M12 connector · plastics · DC

Polarisation filter 0.05...2.5 m 200 D PNP 10...30 1 1 OGP100

Polarisation filter 0.05...2.5 m 200 H PNP 10...30 2 1 OGP101

Retro-reflective sensor · Type OGP M18 x 1 · M12 connector · high-grade stainless steel · DC

Polarisation filter 0.03...4 m 160 D PNP 10...36 1 2 OGP200

Polarisation filter 0.03...4 m 160 H PNP 10...36 2 2 OGP201

Diffuse reflection sensor · Type OGT M18 x 1 · M12 connector · plastics · DC

Diffuse reflection sensor 10...400 mm 25 H PNP 10...30 1 3 OGT100

Diffuse reflection sensor 10...400 mm 25 D PNP 10...30 1 3 OGT101

Diffuse reflection sensor · Type OGH M18 x 1 · M12 connector · high-grade stainless steel · DC

Background suppression 15...250 mm 15 H PNP 10...36 1 4 OGH200

Cylindrical housing OG (M18) PerformanceLine DC




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.




Receiver 25 m – H/D PNP 10...36 1 6 OGE500


87www.ifm.com




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


Polarisation filter 0.03...5 m 200 H/D PNP 10...36 1 6 OGP500

Polarisation filter 0.03...5 m 200 H/D NPN 10...36 4 6 OGP503


Background suppression 15...300 mm 25 H/D PNP 10...36 1 6 OGH500

Background suppression 15...300 mm 25 H/D NPN 10...36 4 6 OGH504


Through-beam sensor · Type OGS M18 x 1 · Cable 2 m · high-grade stainless steel · DC


Through-beam sensor · Type OGE M18 x 1 · Cable 2 m · high-grade stainless steel · DC


Retro-reflective sensor · Type OGP M18 x 1 · Cable 2 m · high-grade stainless steel · DC


Diffuse reflection sensor · Type OGH M18 x 1 · Cable 2 m · high-grade stainless steel · DC


Cylindrical housing OG (M18) WetLine for hygienic and wet areas




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OGS M18 x 1 · Cable 6 m · high-grade stainless steel · DC


Through-beam sensor · Type OGE M18 x 1 · Cable 6 m · high-grade stainless steel · DC



Retro-reflective sensor · Type OGP M18 x 1 · Cable 6 m · high-grade stainless steel · DC




Background suppression 100 mm 8 H PNP 10...36 6 10 OGH306

Background suppression 100 mm 8 D PNP 10...36 6 10 OGH307





88www.ifm.com




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


















OG housing with rectangular housing




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OGS-Cube · M12 connector · high-grade stainless steel · DC


Through-beam sensor · Type OGE-Cube · M12 connector · high-grade stainless steel · DC


Receiver 20 m – D NPN 10...30 8 12 OGE282


Retro-reflective sensor · Type OGP-Cube · M12 connector · metal · DC



Polarisation filter 0.1...4 m 160 D NPN 10...30 8 12 OGP282

Diffuse reflection sensor · Type OGH-Cube · M12 connector · metal · DC


Background suppression 100 mm 7 H NPN 10...30 9 12 OGH282

Background suppression 200 mm 13 H NPN 10...30 9 12 OGH283




89www.ifm.com

Cylindrical housing OG (M18) BasicLine AC/DC




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OGS M18 x 1 · 1/2“ connector · plastics · AC/DC

Transmitter 15 m 2000 – 20...250 10 14 OG0030

Through-beam sensor · Type OGE M18 x 1 · 1/2“ connector · plastics · AC/DC

Receiver 15 m – D AC/DC 20...250 11 14 OG0039*

Retro-reflective sensor · Type OGP M18 x 1 · 1/2“ connector · plastics · AC/DC

Polarisation filter 3 m 262 D AC/DC 20...250 11 14 OG0033*

Diffuse reflection sensor · Type OGT M18 x 1 · 1/2“ connector · plastics · AC/DC

Diffuse reflection sensor 1...600 mm < 169 H AC/DC 20...250 11 14 OG0035*



Rectangular housing OH for industrial applications




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OHS · Cable with connector 0.2 m · plastics · DC

Transmitter 1.2 m 10 – 10...30 3 15 OH5012

Through-beam sensor · Type OHE · Cable with connector 0.2 m · plastics · DC

Receiver 1.2 m – D PNP 10...30 7 15 OH5003

Retro-reflective sensor · Type OHP · Cable with connector 0.2 m · plastics · DC

Polarisation filter 0.8 m 10 D PNP 10...30 7 16 OH5011

Diffuse reflection sensor · Type OHN · Cable with connector 0.2 m · plastics · DC

Diffuse reflection sensor 2...50 mm 3.5 H PNP 10...30 2 17 OH5005

Diffuse reflection sensor · Type OHH · Cable with connector 0.2 m · plastics · DC

Background suppression 1...30 mm 4.5 H PNP 10...30 2 17 OH5007


90www.ifm.com

Rectangular housing OJ PerformanceLine, lateral sensing face




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OJS · M8 connector · plastics · DC

Transmitter 10 m 1000 – 10...30 3 18 OJ5030

Through-beam sensor · Type OJE · M8 connector · plastics · DC

Receiver 10 m – H/D PNP 10...30 12 18 OJ5031

Receiver 10 m – H/D NPN 10...30 13 18 OJ5032

Retro-reflective sensor · Type OJP · M8 connector · plastics · DC

Polarisation filter 0...2 m 64 H/D PNP 10...30 12 18 OJ5026

Polarisation filter 0...2 m 64 H/D NPN 10...30 13 18 OJ5027

Diffuse reflection sensor · Type OJB · M8 connector · plastics · DC

Diffuse reflection sensor 1...600 mm 60 H/D PNP 10...30 12 19 OJ5022

Diffuse reflection sensor 1...600 mm 60 H/D NPN 10...30 13 19 OJ5023

Diffuse reflection sensor 1...1000 mm 150 H/D PNP 10...30 12 19 OJ5071

Diffuse reflection sensor · Type OJH · M8 connector · plastics · DC

Background suppression 15...400 mm < 18 H/D PNP 10...30 12 20 OJ5048

Rectangular housing OL for industrial applications




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OLS · Terminals · plastics · AC/DC

Transmitter 25 m < 2500 – 20...250 14 21 OL0006

Through-beam sensor · Type OLE · Terminals · plastics · AC/DC

Receiver 25 m – H/D relay 20...250 15 21 OL0007

Retro-reflective sensor · Type OLP · Terminals · plastics · AC/DC

Polarisation filter 0.3...5 m 250 H/D relay 20...250 15 22 OL0004*

Diffuse reflection sensor · Type OLT · Terminals · plastics · AC/DC

Diffuse reflection sensor 1...1000 mm < 300 H/D relay 20...250 15 21 OL0005*




91www.ifm.com

Rectangular housing O5 BasicLine




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type O5S · M12 connector · plastics · DC

Transmitter 20 m 500 – 10...36 3 23 O5S200

Through-beam sensor · Type O5E · M12 connector · plastics · DC

Receiver 20 m – D PNP 10...36 7 23 O5E200

Retro-reflective sensor · Type O5P · M12 connector · plastics · DC

Polarisation filter 0.1...7 m 175 D PNP 10...36 7 24 O5P200

Diffuse reflection sensor · Type O5H · M12 connector · plastics · DC

Background suppression 50...1400 mm 50 H PNP 10...36 2 25 O5H200

Background suppression 50...1400 mm 50 H NPN 10...36 9 25 O5H201

Rectangular housing O5 PerformanceLine




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type O5S · Cable 2 m · plastics · DC

Transmitter 25 m 625 – 10...36 5 26 O5S501

Through-beam sensor · Type O5E · Cable 2 m · plastics · DC

Receiver 25 m – H/D PNP 10...36 6 27 O5E501

Retro-reflective sensor · Type O5P · Cable 2 m · plastics · DC

Polarisation filter 0.075...10 m 250 H/D PNP 10...36 6 28 O5P501

Diffuse reflection sensor · Type O5H · Cable 2 m · plastics · DC

Background suppression 50...1800 mm 50 H/D PNP 10...36 6 28 O5H503




92www.ifm.com

Rectangular housing O4 BasicLine




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


Polarisation filter 0.3...18 m 500 D PNP 10...36 7 30 O4P200

Rectangular housing O4 PerformanceLine




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type O4S · Cable 2 m · plastics · DC

Transmitter 80 m 2400 – 10...36 5 31 O4S501

Through-beam sensor · Type O4E · Cable 2 m · plastics · DC


Retro-reflective sensor · Type O4P · Cable 2 m · plastics · DC


Diffuse reflection sensor · Type O4H · Cable 2 m · plastics · DC


Through-beam sensor · Type O4S · M12 connector · plastics · DC

Transmitter 80 m 2400 – 10...36 3 35 O4S500

Through-beam sensor · Type O4E · M12 connector · plastics · DC







93www.ifm.com

Accessories


Prismatic reflector · Ø 25 mm · round · fixing by screw · for type OA, OC, OE, OF, OG, OI, OM, OR, OS, OT, OU · Housing materials:plastics

E20953

Prismatic reflector · Ø 35 mm · round · fixing by screw · for type OA, OC, OE, OF, OG, OI, OM, OR, OS, OT, OU · Housing materials:plastics

E20954

Prismatic reflector · Ø 42 mm · round · for type O5P, OA, OC, OE, OF, OG, OH, OI, OJ, OL, OM, OR, OS, OT, OU · Housing materials:plastics

E20004

Prismatic reflector · Ø 50 mm · round · fixing by screw · for type OA, OC, OE OF, OG, OH, OI, OJ, OM, OR, OS, OS, OT, OU ·Housing materials: plastics

E20956

Prismatic reflector · Ø 80 mm · round · for type O4P, O5P, OG, OJ, OA, OC, OE OF, OH, OI, OM, OR, OS, OT, OU · Housingmaterials: plastics

E20005

Mounting set · for reflector · Ø 25 mm · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti /1.4571 / clamp: stainless steel

E20903


E20907


E20911


E20915

Reflective tape for retro-reflective sensors with polarisation filter · TS-02 · 50 x 1000 mm · Housing materials: plastics E21015

Protective bracket for free-standing and rod mounting · Ø 18 mm · Clamp mounting · Housing materials: stainless steel 316L /1.4404

E21125

Protective bracket for free-standing and rod mounting · Ø 18 mm · with end stop · Mounting clamp · Clamp mounting · Housingmaterials: Mounting clamp: PC black / Angle bracket: stainless steel 316L / 1.4404

E21126


Basic clip · OJ · Housing materials: high-grade stainless steel E20965


94www.ifm.com


Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974

Angle bracket · for type OJ · Housing materials: high-grade stainless steel E20984

Mounting set · OJ · for side lens · Clamp mounting · free-standing M8 · Housing materials: fixture: stainless steel 316Ti / 1.4571 /clamp: stainless steel

E20969

Mounting set · OJ · for front lens · Clamp mounting · free-standing M8 · Housing materials: clamp: diecast zinc / fixture: stainlesssteel 316Ti / 1.4571

E20966

Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087

Mounting set · Clamp mounting · with protective cover · free-standing M10 · for type O5 · Housing materials: stainless steel 316Ti /1.4571 / clamp: diecast zinc

E21084

Dovetail clamp · for type DTS, O4, O5 · Housing materials: AlMgSi0.5 E21088

Angle bracket · O4 · for type O4 · Housing materials: stainless steel 316L / 1.4404 E21120

Angle bracket · O4 · for type O4 · Housing materials: stainless steel 316L / 1.4404 E21117

Wiring diagrams

1

L+

L

1

4

3

2

L+

L

1

4

3

3

1

3

L+

L

4

L+

L

1

4

3

5

L+

L

BN

BU

6

BN

BK

BU

L+

L

7

L+

L

1

4

3

8

L+

L

1

4

3


95www.ifm.com

Wiring diagrams

9

L+

L

1

4

3

10

2

3

L1

N

L+

L

11

2

3

L1

N

L+

L

12

L+2

4

1

3 L2: Teach

13

L+

2

4

1

3 L2: Teach

14

L1L+

L

1

N2

15

L+

L

L1

N2

3

1

4


1

M18

x1

M12

x1

3444

LED

424

3127,5

2

M18

x1

M12

x1

4047

6049

LED 4 x 90°4

24

3

M18

x1

M12

x1

3444

21,4

LED

424

316,5

1

1: with pot.

4

M18

x1

M12

x1

44

59

7261

LED 4 x 90°

50

1

424

1: with pot.

5

M18

x1

M12

x1

3459

7261

LED 4 x 90°4

24

6

M18

x1

M12

x1

3459

7261

LED 4 x 90°

1

424


7

M18

x1

35,658

80,460,4

14

24

1: LED 4 x 90°

8

M18

x1

33,859

80,460,6

1

4242

1: Programming buttons, 2: LED 4 x 90°


96www.ifm.com


9

M18

x1

4047

68,649

LED 4 x 90°4

24

5

10

4459

80,461

LED 4 x 90°

5

M18

x1

424

11

M18

x1

M12

x1

4459

7261

LED 4 x 90°4

24

12

18LEDs

38

M18

x1

M12 x1

11,5

35,415,9

24,1

52

243,3

13

3,3

M18

x1

M12 x1

11,5

35,415,9

24,1

52

24

LEDs

1

18

38

1: setting pushbuttons

14

766453

M18

x1

4

5,2

86

24

LED

"20U

NF

21

1

1: pushbutton

15

3,9 9,6

12,5

3,2 15

2,9

7,6

6,4

20,6

25,1

LED

16

3,9 9,6

12,5

3,2 15

2,9

7,6

6,4

20,6

25,15,

7

LED

173,

9 9,612,5

3,2 15

2,9

7,6

7,2

20,6

25,15

LED

18

45

11

LED

8,2

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton


97www.ifm.com


19

11

LED

7,616

,645

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

20

11

LED

45

9,5

19,5

1

9

LED

4

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

1: pushbutton

21

27LED

1031

75

LED

1

6

62

50

49

5,5

6

LED

8,6

1

1: pushbutton

22

6

62

50

49

5,5

6

8,6

LED

127

LED

1018

13 75

LED

1

1: pushbutton

23

LED

15,4

18,2

M12 x117

5x9

625 1

56

6,446,8

25

70,3

5

LED

6

1

1: When a M5 mounting screw is used, the max. tightening torque is2 Nm.

24

18,2

M12 x1

1736

,5

LED

15,4

5x9

625 1

56

6,446,8

25

70,3

5

LED

6

1



98www.ifm.com


25

1

38

10

1

LED

24,3

15,4

18,2

M12 x1

19,5

37

5x9

625 2

56

6,446,8

25

70,3

5

1

LED6

2

1: with pot., 2: When a M5 mounting screw is used, the max. tighte-ning torque is 2 Nm.

26

5x9

25

56

6,446,8

25

5

1

LED

6

18,2

17

5

6

LED

15,4

1


27

5x9

25 2

56

6,446,8

25

5

1

LED

6

2

18,2

17

5

6

1

LED

30,5

24,3

15,4

1: Programming buttons, 2: When a M5 mounting screw is used, themax. tightening torque is 2 Nm.

28

56

6,446,8

25

5

1

LED

6

2

5x9

25 2

6

1

LED

30,5

24,3

15,4

18,2

19,5

37

5


29

18,2

M12 x1

19,5

37

1

LED

30,5

24,3

15,4

5x9

625 2

56

6,446,8

25

70,3

5

1

LED

62


30

7,963,8

LED

40

5

8,5

74,4

86,2

1

8,5

40

5x10

1

M12 x1

27

21,1

50,9

LED

29,5



99www.ifm.com


31

27

21,1

5

29,5

LED

7,963,8

LED40

5

8,5

74,4

1

8,5

40

5x10

1


32

27

21,2

5

29,5 44

,538

,3

2

LED

7,963,8

LED

40

5

8,5

74,4

1

8,5

40

5x10

1

1: When a M5 mounting screw is used, the max. tightening torque is2 Nm., 2: Programming buttons

33

29,5 44

,538

,3

2

LED

7,963,8

LED

40

5

8,5

74,4

1

8,5

40

5x10

1

27

21,2

23,5

5


34

27

25,3

19,7

5

29,5 44

,538

,3

2

LED

7,963,8

LED40

5

8,5

74,4

1

8,5

40

5x10

1



100www.ifm.com


35

7,963,8

LED

40

5

8,5

74,4

86,2

1

8,5

40

5x10

1

M12 x1

27

21,1

LED

29,5


36

7,963,8

LED

40

5

8,5

74,4

86,2

1

8,5

40

5x10

1

29,5 44

,538

,3

2

LED

M12 x1

27

21,2


37

7,963,8

LED

40

5

8,5

74,4

86,2

1

8,5

40

5x10

1

29,5 44

,538

,3

2

LED

M12 x1

27

21,2

23,5


38

7,963,8

LED

40

5

8,5

74,4

86,2

1

8,5

40

5x10

1

29,5 44

,538

,3

2

LED

M12 x1

2725

,319

,7



101www.ifm.com

Photoelectric sensorslaser


Cylindrical housing OG (M18) Laser PerformanceLine 105 - 105

Rectangular housing OJ Laser PerformanceLine, lateral sensing face 105 - 105

Rectangular housing OJ Laser class 1, front sensing face 105 - 106

Rectangular housing O1 Laser PerformanceLine with background suppression 106 - 106

Accessories 106 - 106




Safe class 2 laser with visible lightfor ease of alignment.

Detect objects smaller than 1 mm across.

Long range versions for measurementup to 60 m.

Accurate and repeatable switchpoint setting.

Fine ajustment mounting bracketsfor easy installation.

Photoelectric sensors: laser

Laser systems are used where detection of small objects or precise positioning isrequired. They are available as through-beam sensors, retro-reflective sensors ordiffuse reflection sensors.

Laser light consists of light waves of identical length which have a defined phase rela-tion (coherence). This results in an important feature of laser systems, that is thealmost parallel light beam. Result: Due to the small angle of divergence long rangesof up to 60 metres can be achieved. The laser spot which is also clearly visible atdaylight simplifies the alignment of the system. Apart from the advantages somepoints have to be taken into account for the selection of the suitable optical system:compared to standard sensors the laser sensors have a reduced temperature range(-10...50 °C). In view of the small light spot and the often high ranges the system ismore sensitive to vibrations than standard sensors.

Mounting aids

The ifm laser sensors offer a useful function for easier alignment: The laser power isincreased during adjustment: This leads to a particularly bright laser spot which en-ables safe alignment from a distance even at daylight.

How dangerous are laser sensors?

Due to the small angle of divergence laser beams are focussed on a small area. Theenergy and power density on this area is extremely high. ifm laser sensors complywith the European standard EN 60825 or the international standard IEC 60825.These standards describe the operation of laser systems.

Coherent: Lasersensors emit light ofa defined wave lengthand the same phaseposition.


104www.ifm.com

Cylindrical housing OG (M18) Laser PerformanceLine




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OGSL M18 x 1 · M12 connector · high-grade stainless steel · DC


Through-beam sensor · Type OGEL M18 x 1 · M12 connector · high-grade stainless steel · DC


Retro-reflective sensor · Type OGPL M18 x 1 · M12 connector · high-grade stainless steel · DC


Diffuse reflection sensor · Type OGHL M18 x 1 · M12 connector · high-grade stainless steel · DC

Background suppression 20...200 mm 1.2 H/D PNP 10...36 2 2 OGH700

Rectangular housing OJ Laser PerformanceLine, lateral sensing face




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Diffuse reflection sensor · Type OJHL · M8 connector · plastics · DC

Background suppression 7...150 mm 0.8 H/D PNP 10...30 3 3 OJ5058

Background suppression 7...150 mm 0.8 H/D PNP 10...30 3 4 OJ5158

Background suppression 15...200 mm 2x1 H/D PNP 10...30 3 5 OJ5054


Rectangular housing OJ Laser class 1, front sensing face




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OJSL · M8 connector · plastics · DC

Transmitter 1 m < 4 – 10...30 1 7 OJ5141

Transmitter 15 m < 24 – 10...30 1 7 OJ5138


105www.ifm.com




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Through-beam sensor · Type OJEL · M8 connector · plastics · DC



Retro-reflective sensor · Type OJPL · M8 connector · plastics · DC

Polarisation filter 8 m < 12 H/D PNP 10...30 3 8 OJ5114

Polarisation filter 8 m < 12 H/D PNP 10...30 3 7 OJ5136

Diffuse reflection sensor · Type OJHL · M8 connector · plastics · DC


Rectangular housing O1 Laser PerformanceLine with background suppression

Type Operating principle Measuringrange

Light spotdiameter

[mm]

Ub

[V]

Currentconsumption

[mA]

Sampling rate /switching frequency

[Hz]

Draw-ingno.

Orderno.

Optical distance sensor · Type O1DL · M12 connector · metal · DC

Background suppression 0.2...10 m 6 10...30 150 5 10 O1D101

Background suppression 0.2...10 m 6 10...30 150 5 10 O1D104

Accessories


Prismatic reflector · Ø 19 mm · round · fixing by screw · M3 · for laser units · for type OGPL, OJPL, OLPL · Housing materials: screw:stainless steel 316 / 1.4401 / spring washer: stainless steel 316 / 1.4401 / Nut: stainless steel 316 / 1.4401 / front plate: PMMA /base: ABS

E20993

Prismatic reflector · 30 x 20 mm · angular · for laser units · for type OGPL, OJPL, OLPL · Housing materials: front plate: PMMA / base:ABS

E20994

Prismatic reflector · 50 x 50 mm · angular · for laser sensors and glass / film detection sensors · Housing materials: plastics E20722

Swivel-mount clip · for type OJ · Housing materials: diecast zinc E20974


106www.ifm.com

Wiring diagrams

1

1

3

L+

L

2

L+

L

1

4

3

3

L+2

4

1

3 L2: Teach


1

M18

x1

M12

x1

3459

7261

LED 4 x 90°4

24

2

M18

x1

M12

x1

3459

7261

LED 4 x 90°

1

424


3

11

LED

45

9,5

15,5

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

4

24LED

35

8,5

1,8 5,

3 19

3,5

5

1

9

LED

4

11,6

1

M8x1

36,5

11

LED

43,5

1

9,5

15,5

1: pushbutton

5

11

LED

45

9,5

19,5

1

9

LED

4

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

1: pushbutton


107www.ifm.com


6

24LED

35

8,5

1,8 5,

3 19

3,5

5

1

9

LED

4

11,6

1

19,5

M8x1

36,5

11

LED

43,5

1

9,5

1: pushbutton

7

1

9

LED

4

11,6

M8x1

1

36,5

11

LED

8,2

43,5

1

24LED

35

8,5

1,8 5,

3 19

3,5

5

1: pushbutton

8

1LED

44

11,6

1

36,5

11

LED

43,5

M8x1

19

12412

LED

8,2

35

3,58,5

5

1,85,

3

1: pushbutton

9

M8x1

1

36,5

11

LED

43,5

1LED

44

11,6

19

12412

LED

3,58,5

5

1,85,

3

9,5

3519

,5

1: pushbutton

10

52

1 2

30

45

2520

4,5

6

4559

42

M12x1

30

1: 4-digit alphanumeric display, 2: Programming buttons


108www.ifm.com


109

Photoelectric sensorsfibre optics


OOF amplifiers for acrylic fibre optics 113 - 113

OBF amplifiers for acrylic fibre optics 113 - 113

Acrylic fibre optics for OBF / OOF housings, through-beam system 114 - 114

Acrylic fibre optics for OBF / OOF housings, diffuse reflection system 114 - 114

Acrylic fibre optics for OBF / OOF housings, through-beam system, can be cut to length 114 - 114

Acrylic fibre optics for OBF / OOF housings, diffuse reflection system, can be cut to length 114 - 114

Acrylic fibres on a reel for OBF housing 114 - 114





Acrylic and glass fibre optic sensingheads and amplifiers.

Can be used in areas where spaceand access is restricted.

Fibres for high temperatures and usewith aggressive chemicals.

Multi-channel amplifiers with displayand logic functions.

Simplified wiring and reducedspace requirement.

Photoelectric sensors: fibre optics

Fully automatic manufacturing machines become more and more compact. Fibreoptics are used where mounting space for photoelectric standard sensors is confined.Advantages of these systems: The evaluation electronics and the optoelectronic com-ponents are located separately from the sensing surface of the system. Fibre opticsensing heads can therefore be mounted in places where access is difficult. Fibreoptics are the best choice, in particular for short ranges.

Versions of fibre optic systems

Through-beam principle

Transmitting and receiving fibre optics are laid separately. The two ends (fibre opticheads) are mounted opposite each other. The light beam interruption is evaluatedaccording to the through-beam principle. The maximum range is 120 cm.

Diffuse reflection principle

Transmitting and receiving fibres are in one sheath. The sensing head incorporatesreceiving and transmitting fibre bundles. The ranges of the ifm sensors are max.70 mm.

Applications of fibre optic systems:

Confined space

The fibre optic head is directly located where sensing takes place, the mating ampli-fier where sufficient mounting space is available.

Detection of minute objects

Depending on the type of sensing head and range objects up to 0.5 mm can bedetected safely. When the movement of objects is precise, it is possible to detect finestructures, e.g. thread pitches.

High temperatures

Fibre optics with metal sheath can be used up to 290 °C, fibre optics with metalsilicone sheath up to 150 °C.

Chemical resistance

Metal silicone sheathed fibre optics are resistant to many aggressive chemicals.

Minute objects up to0.5 mm are detectedsafely.

Fibre optic systemscan also be mounted

in places where accessis difficult.


112www.ifm.com

OOF amplifiers for acrylic fibre optics

Type Numberof inputchannels

Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OOF · M12 connector · plastics · DC · Wiring diagram no. 1

2 FT-11 red 3.8 m 0...300 mm H/D PNP 12...36 1 OO5000







OBF amplifiers for acrylic fibre optics

Type Numberof inputchannels

Forfibreoptics

Typeof light

Sensingrange

through beam

Sensingrangediffuse


Ub

[V]

Draw-ingno.

Orderno.

Type OBF · M12 connector · plastics · DC · Wiring diagram no. 5

1 FT-11 red 0...2 m 0...100 mm H/D PNP/NPN 10...30 5 OBF500



Type OBF · Cable 2 m · plastics · DC · Wiring diagram no. 6





1 FT-11 red 0...1.2 m 0...70 mm H/D PNP 10...36 5 OB5013


1 FT-11 red 0...1.2 m 0...70 mm H/D NPN 10...36 5 OB5014


113www.ifm.com

Acrylic fibre optics for OBF / OOF housings, through-beam system

Type Fibre opticmaterial

RangeOB50.. / OBF5.. / OO50..

[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

PMMA 150 / 210 / 800 aluminium -40...70 PE (polyethylene) 8 E20615

Acrylic fibre optics for OBF / OOF housings, diffuse reflection system



[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

PMMA 20 / 25 / 60 aluminium -40...70 PE (polyethylene) 9 E20639

Acrylic fibre optics for OBF / OOF housings, through-beam system, can be cut to length



[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

PMMA 45 / 80 / 120 aluminium -40...70 – 10 E20768

PMMA 175 / 370 / 700 aluminium -40...70 – 10 E20767

Acrylic fibre optics for OBF / OOF housings, diffuse reflection system, can be cut to length



[mm]

Sensinghead

material

Ambienttemperature

[°C]

Sheathingmaterial

Draw-ingno.

Orderno.

PMMA 55 / 110 / 235 aluminium -40...70 – 11 E20765

Acrylic fibres on a reel for OBF housing


acrylic fibres on a reel · 20 m · for type OBF · Housing materials: PE / Fibre: : PMMA E20773

acrylic fibres on a reel · 50 m · for type OBF · Housing materials: PE / Fibre: : PMMA E20774


114www.ifm.com

Accessories


cutter for fibre optics · Housing materials: plastics E20600

Wiring diagrams

1

L+

L

1

4

2

7

3Out 2Out 1

2:4:

7: function check

2

4:2:5:

Out 1Out 2Out 3

6: Out 4

L+

L

1

4

6

7

3

7: function check

3

L+

L

A

E

T

O

L

E:P:S:

Out 1Out 2Out 3

G: Out 4C:T:

Out 5Out 6

O: function check

4

E:P:S:

Out 1Out 2Out 3

G: Out 4C:T:

Out 5Out 6

N:J:

Out 7Out 8

L+

L

A

E

J

O

L

O: function check

5

2

L

L+4

1

3

4

L

L+2

1

3

6

L

L+

L

L+BK

VT

BN

BU

BK

VT

BN

BU

7

L+

L

1

4

3

L+

L

1

4

3

8

L

L+

3

2

4

1

L

L+

1

2

4

3

2: function check

9

L

L+

3

4

2

1

L

L+

1

4

2

3

2: function check


115www.ifm.com


1


2


3


4


5

15

36

LED

2

M12

x1

1

74

6044

3,2

1: mounting on DIN rail, 2: setting pushbuttons

6

LED

2

1

77

6044

3,2

M8x

1

15

36



116www.ifm.com


7

72

6044

3,21

1536

LED

2


8

15

M4

9

23

M416

10

3010,5

5

M5

11

40

M89

14,5


117www.ifm.com

Photoelectric sensorsspecific systems


Sensors for the detection of transparent objects 121 - 121

Sensors for distance and level measurement 121 - 121

Sensors for colour detection 121 - 122

Optical fork sensors 122 - 122

Optical angle sensors 123 - 123

Safety light curtains 123 - 124

Safety light grids 125 - 125


Evaluation units light curtains / safety light grids 125 - 125

Accessories safety light curtains / safety light grids 125 - 126




High-quality photoelectric sensorsfor different applications.

Excellent price / performance ratio.

Extremely compact laser distancesensor with 10 m range.

Sensor for the detection of transpa-rent objects (PET, glass, film etc.).

Extensive range of system componentsfor easy and safe mounting.

Detection of transparent objects

Counting bottles and glasses or the reliable monitoring of film for tear can be per-formed without problem using specially designed retro-reflective sensors.

ifm offers a retro-reflective sensor with a small switching hysteresis, in particular forthe detection of transparent objects. Due to the operating principle, retro-reflectivesensors have the advantage that the light beam must pass the object to be detectedtwice. Thus the light is sufficiently weakened to detect a transparent object safely.Precise adjustment is made by means of the Teach button.

Distance measurement

The continued development of the pmd technology (Photonic Mixer Device) nowenables distance measurement to within a millimetre at high ranges using a lasersensor. The efector pmd laser sensor operates to the time-of-flight principle: A lightbeam is emitted by a transmitting element and reflected to the receiver element byan object. The measured time of flight relates to the distance from the sensor to theobject.

Traditional time-of-flight sensors use a photodiode as receiver element. Additionalelectronics is used for signal acquisition and processing.

Disadvantage: This sensor design is complex, large in size and therefore often notsuitable for industrial position sensing.

In comparison, the efector pmd sensor’s receiver element is a “System-on-Chip”design: both sensor element and electronics for signal evaluation are integrated on asingle silicon chip called a Photonic Mixer Device (PMD).

The advantage: The sensor offers a high performance in a compact, industrially com-patible housing.

“efector pmd” can be used for level measurement and positioning tasks, for exam-ple to position industrial trucks in high bay storage areas and to protect autonomousindustrial transport systems against collision.

Typical application forcontrast sensors:Counting of glassbottles.

The efector pmdprovides an analoguesignal that is propor-tional to the object-to-sensor distance.


120www.ifm.com

Sensors for the detection of transparent objects




Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Retro-reflective sensor · Type OJPG · M8 connector · plastics · DC

Polarisation filter 0.2...1.5 m 64 H/D PNP 10...30 1 1 OJ5086

Retro-reflective sensor · Type O5G · M12 connector · plastics · DC

Polarisation filter 0...1.5 m 40 / 80 H/D PNP/NPN 10...36 8 2 O5G500

Sensors for distance and level measurement


Light spotdiameter

[mm]

Ub

[V]

Currentconsumption

[mA]


[Hz]

Draw-ingno.

Orderno.

M12 connector · Output function OUT1: normally open / closed programmable OUT2: normally open / closed programmable oranalogue (4...20 mA / 0...10 V, scalable) · DC PNP · Wiring diagram no. 9

Optical distance sensor 0.2...10 m 6 18...30 150 1...50 3 O1D100

M12 connector · Output function OUT1: normally open / closed programmable OUT2: normally open / closed programmable oranalogue (4...20 mA / 0...10 V, scalable) · DC NPN · Wiring diagram no. 10


M12 connector · Output function OUT1: normally open / closed programmable OUT2: normally open / closed programmable oranalogue (4...20 mA / 0...10 V, scalable) · DC PNP · Wiring diagram no. 9



Optical distance sensor 1...75 m 150 18...30 150 1...33 3 O1D106

Sensors for colour detection


Light spotdiameter

[mm]

Ub

[V]

Currentconsumption

[mA]


[Hz]

Draw-ingno.

Orderno.

M12 connector · Output function light-on / dark-on programmable · DC PNP/NPN · Wiring diagram no. 2

Colour sensor 17 mm 2.5 x 6 10...36 50 2000 4 O5C500

M12 connector · DC PNP · Wiring diagram no. 3

Colour sensor 12.5 mm 2 x 4 12...30 80 1000 5 OD5005

Colour sensor 60 mm 13 12...30 80 1000 5 OD5007


121www.ifm.com


Light spotdiameter

[mm]

Ub

[V]

Currentconsumption

[mA]


[Hz]

Draw-ingno.

Orderno.


Colour sensor 12.5 mm 2 x 4 12...30 80 300 5 OD5009

Colour sensor 60 mm 13 12...30 80 300 5 OD5011


Colour sensor 9 mm – 12...30 80 1000 6 OD5013

Optical fork sensors

Type Fork width(w)

[mm]

Fork depth(d)

[mm]

Smallestdetectableobject Ø

[mm]

Switchingfrequency

[Hz]


Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Optical fork sensor · Type OPU · M8 connector · metal · DC

10 17 0.3 10000 H/D PNP/NPN 10...35 11 7 OPU200

20 25 0.4 4000 H/D PNP 10...35 5 8 OPU201

30 35 0.5 4000 H/D PNP 10...35 5 9 OPU202

50 55 0.5 4000 H/D PNP 10...35 5 10 OPU203

80 55 0.5 4000 H/D PNP 10...35 5 11 OPU204

120 60 0.8 2000 H/D PNP 10...35 5 12 OPU205

20 25 0.4 4000 H/D NPN 10...35 6 8 OPU207

30 35 0.5 4000 H/D NPN 10...35 6 9 OPU208

50 55 0.5 4000 H/D NPN 10...35 6 10 OPU209

80 55 0.5 4000 H/D NPN 10...35 6 11 OPU210

120 60 0.8 2000 H/D NPN 10...35 6 12 OPU211


122www.ifm.com

Optical angle sensors

Type Side length(x, y)

[mm]

Sensor width(z)

[mm]

Smallestdetectableobject Ø

[mm]

Switchingfrequency

[Hz]


Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Optical angle sensor · Type OPL · M8 connector · metal · DC

50 60 0.5 4000 H/D PNP 10...35 5 13 OPL200

80 100 0.7 4000 H/D PNP 10...35 5 14 OPL201

50 60 0.5 4000 H/D NPN 10...35 6 13 OPL202

80 100 0.7 4000 H/D NPN 10...35 6 14 OPL203

Safety light curtains

Type Resolution /detection capacity

[mm]

Protected areaheight

[mm]

Protected areawidth

[m]

Responsetime

[ms]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Complies with the requirements: type 2 , SIL 2 , SILcl 2 , PL d · M12 connector

30 160 0...4 / 3...12 4.5 24 7 15 OY031S

30 310 0...4 / 3...12 6 24 7 15 OY032S

30 460 0...4 / 3...12 8 24 7 15 OY033S

30 610 0...4 / 3...12 9.5 24 7 15 OY034S

30 760 0...4 / 3...12 11 24 7 15 OY035S

30 910 0...4 / 3...12 12.5 24 7 15 OY036S

30 1060 0...4 / 3...12 14.5 24 7 15 OY037S

30 1210 0...4 / 3...12 16 24 7 15 OY038S

30 1360 0...4 / 3...12 17.5 24 7 15 OY039S

30 1510 0...4 / 3...12 19.5 24 7 15 OY040S

40 160 0...4 / 3...12 4 24 7 15 OY051S

40 310 0...4 / 3...12 5 24 7 15 OY052S

40 460 0...4 / 3...12 6 24 7 15 OY053S

40 610 0...4 / 3...12 7 24 7 15 OY054S

40 760 0...4 / 3...12 8 24 7 15 OY055S

40 910 0...4 / 3...12 9.5 24 7 15 OY056S

40 1060 0...4 / 3...12 10.5 24 7 15 OY057S

40 1210 0...4 / 3...12 11.5 24 7 15 OY058S

40 1360 0...4 / 3...12 12.5 24 7 15 OY059S

40 1510 0...4 / 3...12 13.5 24 7 15 OY060S

50 310 0...4 / 3...12 4.5 24 7 15 OY072S

50 460 0...4 / 3...12 5.5 24 7 15 OY073S

50 610 0...4 / 3...12 6 24 7 15 OY074S

50 760 0...4 / 3...12 7 24 7 15 OY075S

50 910 0...4 / 3...12 8 24 7 15 OY076S

50 1060 0...4 / 3...12 9 24 7 15 OY077S

50 1210 0...4 / 3...12 10 24 7 15 OY078S

50 1360 0...4 / 3...12 10.5 24 7 15 OY079S

50 1510 0...4 / 3...12 11.5 24 7 15 OY080S


123www.ifm.com

Type Resolution /detection capacity

[mm]

Protected areaheight

[mm]

Protected areawidth

[m]

Responsetime

[ms]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


90 610 0...4 / 3...12 4 24 7 15 OY094S

90 760 0...4 / 3...12 4.5 24 7 15 OY095S

90 910 0...4 / 3...12 5 24 7 15 OY096S

90 1060 0...4 / 3...12 5.5 24 7 15 OY097S

90 1210 0...4 / 3...12 6 24 7 15 OY098S

90 1360 0...4 / 3...12 6.5 24 7 15 OY099S

90 1510 0...4 / 3...12 7 24 7 15 OY100S

Complies with the requirements: type 4 , SIL 3 , SILcl 3 , PL e · M12 connector

30 160 0...4 / 3...12 4 24 7 15 OY041S

30 310 0...4 / 3...12 5.5 24 7 15 OY042S

30 460 0...4 / 3...12 7.5 24 7 15 OY043S

30 610 0...4 / 3...12 8.5 24 7 15 OY044S

30 760 0...4 / 3...12 10.5 24 7 15 OY045S

30 910 0...4 / 3...12 12 24 7 15 OY046S

30 1060 0...4 / 3...12 14 24 7 15 OY047S

30 1210 0...4 / 3...12 15.5 24 7 15 OY048S

30 1360 0...4 / 3...12 17 24 7 15 OY049S

30 1510 0...4 / 3...12 18.5 24 7 15 OY050S

40 160 0...4 / 3...12 3.5 24 7 15 OY061S

40 310 0...4 / 3...12 4.5 24 7 15 OY062S

40 460 0...4 / 3...12 5.5 24 7 15 OY063S

40 610 0...4 / 3...12 6.5 24 7 15 OY064S

40 760 0...4 / 3...12 7.5 24 7 15 OY065S

40 910 0...4 / 3...12 9 24 7 15 OY066S

40 1060 0...4 / 3...12 10 24 7 15 OY067S

40 1210 0...4 / 3...12 11 24 7 15 OY068S

40 1360 0...4 / 3...12 12 24 7 15 OY069S

40 1510 0...4 / 3...12 13 24 7 15 OY070S

50 310 0...4 / 3...12 4 24 7 15 OY082S

50 460 0...4 / 3...12 4.5 24 7 15 OY083S

50 610 0...4 / 3...12 5.5 24 7 15 OY084S

50 760 0...4 / 3...12 6.5 24 7 15 OY085S

50 910 0...4 / 3...12 7.5 24 7 15 OY086S

50 1060 0...4 / 3...12 8.5 24 7 15 OY087S

50 1210 0...4 / 3...12 9 24 7 15 OY088S

50 1360 0...4 / 3...12 10 24 7 15 OY089S

50 1510 0...4 / 3...12 11 24 7 15 OY090S

90 610 0...4 / 3...12 4 24 7 15 OY104S

90 760 0...4 / 3...12 4.5 24 7 15 OY105S

90 910 0...4 / 3...12 5 24 7 15 OY106S

90 1060 0...4 / 3...12 5.5 24 7 15 OY107S

90 1210 0...4 / 3...12 5.5 24 7 15 OY108S

90 1360 0...4 / 3...12 6 24 7 15 OY109S

90 1510 0...4 / 3...12 6.5 24 7 15 OY110S


124www.ifm.com

Safety light grids

Type Numberof beams

Protectedarea height

[mm]

Protectedarea width

[m]

Responsetime

[ms]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


2 510 0...4 / 3...12 3 24 7 16 OY111S

3 810 0...4 / 3...12 3.5 24 7 16 OY112S

4 910 0...4 / 3...12 3.5 24 7 16 OY113S

Complies with the requirements: type 4 , SIL 3 , SILcl 3 , PL e · M12 connector

2 510 0...4 / 3...12 2.5 24 7 16 OY114S

3 810 0...4 / 3...12 3 24 7 16 OY115S

4 910 0...4 / 3...12 3 24 7 16 OY116S

Accessories


Angle bracket · for type O5 · Housing materials: stainless steel 316Ti / 1.4571 E21087


Prismatic reflector · 50 x 50 mm · angular · for laser sensors and glass / film detection sensors · Housing materials: plastics E20722

Mounting set · Clamp mounting · rod mounting Ø 12 mm · for type O1D, O2D · Housing materials: fixture: stainless steel / clamp:stainless steel / screws: stainless steel / Nut: high-grade stainless steel

E2D101

Evaluation units light curtains / safety light grids

Type Description Draw-ingno.

Orderno.

Safety relay · Muting relay · Housing for DIN rail mounting · For the connection of safety light curtains / safety light gridswith OSSD · Safety category type 4 to IEC 61496 · for industrial applications

17 G2001S

Accessories safety light curtains / safety light grids


Corner mirror · Length: 250 mm · for safety light curtains · Protected area height · 160 mm · for type OY · Housing materials:aluminium epoxy-powder coated / plastics / Accessories: steel galvanised

EY1001


EY1002


125www.ifm.com



EY1003

Corner mirror · Length: 715 mm · for safety light curtains · Protected area height · 610 mm · for safety light grids · 2 beams · fortype OY · Housing materials: aluminium epoxy-powder coated / plastics / Accessories: steel galvanised

EY1004


EY1005


EY1006


EY1007


EY1008


EY1009


EY1010

Vibration damper · for type OY · Housing materials: rubber / metal galvanised · Pack quantity: 4 EY3001

Vibration damper · for type OY · Housing materials: rubber / metal galvanised · Pack quantity: 6 EY3002

Laser adjustment aid · for safety light curtains · for type OY · Housing materials: plastics EY3099

Wiring diagrams

1

L+2

4

1

3 L2: Teach

2

L+

L

2

5

1

4

3Out

N.C.

AT

2: Input AT activation trigger

3

L+

L

2

5

1

4

3Out

2: Input AT activation trigger,5: input „External Teach“

4

Out 3

5

3

1

4

6

Out 1

Out 2

L+2

L7

1: Input AT activation trigger,5: input „External Teach“


126www.ifm.com

Wiring diagrams

5

L+

L

1

4

3

6

L+

L

1

4

3

7

5

4

3

2

6

7

1 OSSD1

OSSD2

K1/K2/Restart

SEL_A

SEL_B

8

L+

L

8

L+

L

2

5

1

4

3

n.c.

L+

L

2

5

1

4

3

n.c.

9

L+

L3

4

2

1

Out 1Out 2

4:2:

4

L

L+1

2

3Out 1Out 2

4:2:

10

L

L+

Out 2Out 1

2:4: 3

4

2

1L+

LOut 2Out 1

2:4: 3

2

4

1

11

L+

L

1

4

3

L+

L

1

4

3


1

45

11

LED

8,2

1

24

3,2

3,1

LED

35

M8x1

8,83,1

1

9

LED

4

1

1: pushbutton

2

18,2

M12 x1

19,5

37

1

LED

30,5

24,3

15,4

5x96

25 2

56

6,446,8

25

70,3

5

1

LED

6

2



127www.ifm.com


3

52

1 2

30

45

2520

4,5

6

4559

42

M12x1

30


4

56

6,446,8

25

70,3

5

1

LED

6

2

1

LED

30,5

24,3

15,4

5x9

625 2

18,2

M12 x1

25,9

38


5

4380

M12

x1

96

28

21 30

M5

M12

x1

3928

4053

69

M5

15

1

LED

LED

2

3

4

1: lens, 2: selection switch color tolerance, 3: programming selectorswitch, 4: teach button

6

4380

M12

x1

96

28

21 30

M5

119

M12

x1

3928

4053

69

M5

LED

LED

2

3

4

14

1

1: fibre optic connection, 2: selection switch color tolerance, 3: pro-gramming selector switch, 4: teach button

7

6M8x

1

10

4,34,5

4,5

12,5

10

W=1

0

4

D = 1745

25

LED

1222

10

1: output function switch , 2: potentiometer sensitivity

8

W=

20

4,34,5

4,5

D=25

5

50

M8x

1

10

LED

12,5 10

10

4,5

12 20,5

10

1: potentiometer sensitivity, 2: output function switch

9

1220

30

M8x

1

10

LED

4,34,5

4,5

4,5

12,5

10

1010

W=

30

5

D = 3560



128www.ifm.com


10

1220

30

10

M8x

1

10

LED

4,34,5

4,5

4,5

12,5

1010

W=

50

5

D = 5580


11

1220

30

M8x

1

10

LED

4,34,5

4,5

4,5

12,5

10

1010

W=

80

5

D = 5580


12

3752

62

10

M8x

1

10

LED

4,3 5 20

2220

1212

W=

120

10

D = 6090


13

7510

Z60

Y=

5075

22,5

4,3

4,5

4,5

4250

X=50

M8x

14250

10,5LED

17,5 25

,5 35,5

10


14

10510

Z100

Y=

8010

522

,5

4,3

4,5

4,5

7280

X=80

M8x

1

7280

10,5LED

7280

4,3

6,7

17,5 25

,5 35,5

10


15

40 2010

3

1010,528

28

5,5

40

10

2010

1,5

M5

14,530

28

T

M12x1

1129

,561

,5L

R

T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2:LED (yellow), 3: LED 2 colours (red/green)


129www.ifm.com


16

40 2010

3

1010,528

28

5,5

4010

2010

1,5

M5

14,5

30

28

T

M12x1

5129

,510

2L

R

T: Transmitter, R: Receiver, 1: LED 3 colours (red/green/orange), 2:LED yellow, 3: LED 2 colours (red/green)

17

114,5

99

35


130www.ifm.com


131

Object recognition


Sensors for object recognition with PNP output function 135 - 135

Illumination units 135 - 135

Accessories 2D 135 - 136

Sensors for 3D object recognition 136 - 136

Accessories 3D 136 - 136




2D vision sensor for object recognition.

3D sensor for assessment of distance, level or volume.

3D camera for spatial detection of scenes and objects.

Easy, time-saving parameter setting.

Robust, industrially compatible housing with integrated lighting.

2D vision sensor for object recognition

In automation technology visions sensors are an integral part of assembly and manu-facturing tasks as well as quality control and thus increase efficiency. They arecameras with application-specific evaluation, i.e. reliable electronic eyes at a low costand a high degree of integration. In a robust, industrially compatible housing theycombine lighting, lens, camera chip, evaluation and process connections for the inte-gration in the higher-level controller.

The application possibilities of efector dualis range from presence, position andorientation monitoring, via sorting and counting tasks to quality control.

3D sensor for assessment of distance, level or volume

efector pmd 3d is the first industrial 3D sensor that can assess objects in three dimen-sions at a glance.

Special feature: the time-of-flight measurement and evaluation are integrated onone chip. Each pixel of this chip matrix evaluates its distance to the object. The imageof the object on the chip matrix and the respective distance values correspond to a3D image.

This technology enables the detailed assessment of the object’s or scene’s conditionsby means of volume, distance or level detection in three dimensions. Typical applica-tions are completeness checks and level monitoring in the food industry as well aspresence and dimension monitoring in conveying.

3D camera for detection in three dimensions of scenes and objects

The pmd 3d camera detects scenes and objects in their spatial dimensions at aglance. In contrast to laser scanners it does not require moving components and isthus robust and wear-free. The operating principle is the same as for the 3D sensor.

Besides the 3D distance image the camera provides a grey image of the scene. Thecombination of these images offers integrators the possibility to freely programapplication-specific tasks by means of a software development kit. This results in low-cost application solutions in the areas of packaging, storage and materials handling,airport logistics, collision avoidance, robotics, monitoring of space and persons.

Set-up in just a fewsteps: The profes-sional and easy menuguidance allowsconfiguration of theefector dualis to yourapplication in just sixoperating steps.

Object recognition

134www.ifm.com

Sensors for object recognition with PNP output function

Type Operatingprinciple

Typeof light

Max.field of

view size[mm]

Detectionrate

[Hz]

Motionspeed(max.)[m/s]

Draw-ingno.

Orderno.

Type O2D2 · metal · DC

Object recognition sensor – 640 x 480 10 1 1 O2D220

Object recognition sensor – 1280 x 960 10 1 1 O2D222

Illumination units

Type Operating principle Dimensions

[mm]

Typeof light

Activeilluminated

area[mm]

I0normal light

intensity[mA]

I0high lightintensity

[mA]

Draw-ingno.

Orderno.

PUR cable 2 m · metal · DC · Wiring diagram no. 1

Illumination unit 66.5 x 33.4 x 9.2 red 25 x 25 50 25 2 O2D900

Illumination unit 66.5 x 33.4 x 9.2 infrared 25 x 25 50 25 2 O2D901

Illumination unit 103 x 81 x 9.2 red 50 x 50 200 100 3 O2D902

Illumination unit 103 x 81 x 9.2 infrared 50 x 50 200 100 3 O2D903

Illumination unit 156 x 133 x 9.2 red 100 x 100 450 250 4 O2D904

Accessories 2D


Operating software · O2D E2D200

Mounting set · O2D, O2M, O2I · Clamp mounting · rod mounting Ø 12 mm · Housing materials: fixture: stainless steel / clamp:stainless steel

E2D110


E2D112

mounting rod · Ø 14 / M12 · Length: 130 mm · straight · Housing materials: stainless steel 316Ti / 1.4571 E20939

mounting rod · Ø 14 / M12 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20941

Cube · M12 · aluminium profile · Housing materials: diecast zinc E20952

Object recognition

135www.ifm.com


Plastic protective pane for the food industry · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21166

Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168

Jumper · ifm electronic · straight / straight · Ethernet · Cross-over patch cable · 2 m · Housing materials: PUR / PC E11898

Patch cable · Cross-over patch cable · Cable length 5 m E30112

Socket · ifm electronic · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 2 m · Housingmaterials: PUR

E11231

Socket · ifm electronic · angled · Free from silicone · Free from halogen · gold-plated contacts · M12 connector · 5 m · Housingmaterials: PUR

E11232

Socket · ifm electronic · straight · Free from halogen · M12 connector · 2 m · Housing materials: PUR E11950

Sensors for 3D object recognition

Type Operatingprinciple

Reso-lution

[pixels]

Angle of aperture(horizontal x

vertical)[°]

Lighting Max.sampling

rate[Hz]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

PMD 3D sensor · Type O3D · M12 connector · metal · DC

PMD 3D sensor 64 x 48 30° x 40° Infrared LED 20 24 1 5 O3D200

Accessories 3D


Operating software for PMD 3D sensor · O3D E3D200

Mounting set · O3D · Clamp mounting · rod mounting Ø 14 mm · Housing materials: fixture: stainless steel / clamp: stainless steel E3D103


Object recognition

136www.ifm.com

Wiring diagrams

1

L+

L

BN

BK

WH

BU

black: Trigger, white: Opera-ting mode „high light intensi-ty“


1

M12x1

2

19

M12x1

53,5

4,3

20,5

44

19,733

1

45

24,5

42

57

8060

21

9,57

3

1: display, 2: Focus setting, 3: Centre of the lens axes

2

9,233,425

25

21,9

66,5

1934

3 LED

12,6

3

8150

50 103

90

68

3,3

4,3

3 LED

24,6

9,8

4

9,8133100

100 15

614

1

119

7,3

3 LED

3,3

6

631

5

95

60,540

4563

,8

16

75

137

120

123,

5

18M12x1

M12x1

94

21,5

1: lens, 2: Illumination unit, 3: Display / buttons / LEDs, 4: Focus set-ting

Object recognition

137www.ifm.com

Encoders


Incremental encoders with solid shaft 141 - 141

Incremental encoders with hollow shaft 141 - 141

Absolute multiturn encoders (Profibus) 141 - 141




Robust designs.

Industrial standard housings.

Cable entry for axial and radial use.

Designs with integrated bus interface.

Hollow shaft encoder for direct mounting on actuators.

Encoders

In many manufacturing and production processes they are indispensable as reliabletransducers to ensure precise positioning. They convert rotary movement into digitalsignals. Linear measurement is also possible in conjunction with rack and pinion ormeasuring wheels. Encoders use the wear-free photoelectric detection. A pulse discfirmly attached to the shaft ensures this detection. Encoders are basically divided intotwo types: incremental and absolute encoders.

Incremental encoders

Incremental encoders generate a precisely defined number of pulses per revolution.They are a measure of the angular or linear distance moved. The coded disc is dividedinto separate segments which are alternately transparent or opaque. An LED emits aparallel-orientated light beam which illuminates all segments of the coded disc.Photo elements receive the modulated light and convert it into two sinusoidal sig-nals. Digitalisation electronics amplify the signals and shape them into square-wavepulse trains which are generated via the line driver in the output. The phase differ-ence between signal A and B, which are phase-shifted by 90 degrees, allows evalua-tion of the direction of rotation.

Absolute encoders

Absolute encoders provide an absolute numerical value for each angular position.This code value is available immediately after power is applied. This “absolute” valuemakes a reference procedure like the one required for the incremental encoderunnecessary. Absolute encoders are used wherever angular positions have to beallocated to a certain value and where the detection of the present position is abso-lutely necessary in the case of a power failure.

Singleturn and multiturn

Singleturn encoders divide a mechanical revolution (0 to 360 degrees) into a certainnumber of measuring steps. The measuring values are repeated after one revolution.The maximum resolution is 8192.

Multiturn encoders, however, do not only detect angular positions but also distin-guish between multiple revolutions.

Linear measurementby means of a count-er: rotary movementis converted intodigital signals.

Hollow shaft encoderfor direct mounting

on the axis.

Encoders

140www.ifm.com

Incremental encoders with solid shaft

Type Resolution Ub

[V]

f

[kHz]

Iload

[mA]

Shaft

[mm]

Ambienttemperature

[°C]

Cableentry

Draw-ingno.

Orderno.

Cable 2 m · Output TTL output 20 mA

500 5 300 20 6 -30...100 radial / axially 1 RB1015

Cable 2 m · Output HTL-output 50 mA, short-circuit protected < 1 min

125 10...30 160 50 6 -30...70 radial / axially 1 RB6009



Cable 2 m · Output TTL output 20 mA

500 5 300 20 6 -40...100 radial / axially 2 RU1016

1024 5 300 20 6 -40...100 radial / axially 2 RU1025

Incremental encoders with hollow shaft

Type Resolution Ub

[V]

f

[kHz]

Iload

[mA]

Shaft

[mm]

Ambienttemperature

[°C]

Cableentry

Draw-ingno.

Orderno.

Cable 1 m · Output HTL-output 50 mA, short-circuit protected < 1 min

500 10...30 300 50 12 H7 -40...100 radial / axially 3 RO6344

1024 10...30 300 50 12 H7 -40...100 radial / axially 3 RO6345

Absolute multiturn encoders (Profibus)

Type Resolution Ub

[V]

f

[kHz]

Iload

[mA]

Shaft

[mm]

Ambienttemperature

[°C]

Cableentry

Draw-ingno.

Orderno.

Terminals · Output Profibus data interface

25 bits 10...30 – – 10 -40...70 – 4 RM3005

Accessories


Angle bracket · for encoders · for type RB, RC, RU, RN, RM · Housing materials: aluminium black anodised E60033

Angle bracket · for encoders · for type RM, RMU, RN, RU · Housing materials: aluminium black anodised E60034

Flexible coupling with clamp connection [KV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60064

Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 6 mm · Housing materials: aluminium E60063

Encoders

141www.ifm.com


Flexible coupling with adjusting screw connection [SV] · Ø 6 mm / Ø 10 mm · Housing materials: aluminium E60028


1

251

237,5

618 35

215

30°

4,5

1: reference mark, 2: M3 5 mm deep

2

4

3

650 58

3

10

h7

46,7±0,5

6

120°

421 2

1: reference mark, 2: M4 5 mm deep

3

20

63 68

3,2

6

34,5

12H

7

24

28

47,2±0,5

58

TX 8

4

120°

48

20°

24

1

70

18

1036 58

20

f8

10

1: M4 5 mm deep

Encoders

142www.ifm.com

Encoders

143

Evaluation systems


Universal speed monitors 147 - 147

Speed monitor with integrated sensor 147 - 147

Multifunctional displays for digital signals / frequency input 147 - 147

Universal counters 147 - 147

Multifunctional displays for analogue standard signals 148 - 148





Easy adjustment and parameter setting.

Clear LCD display with simplepushbutton setup.

Primary voltage 24V dc or 110 / 230V ac.

Switching relays and transistor outputs.Analogue also available.

Standstill, overspeed, direction, slipand frequency conversion.

Evaluation systems

Although PLC applications in industrial automation are becoming more and moreversatile there are still numerous processes in practice which require decentralisedmonitoring.

For this ifm electronic offers a number of pulse evaluation systems in the productgroup “ecomat 200”. The application area ranges from simple standstill monitoringor blockage protection of a conveyor belt, maximum speed monitoring in windpower stations, slip monitoring of couplings through to direction monitoring, e.g.twin pumps with non-return valves.

Different units for rail mounting and compact designs in M18 and M30 metalhousings are available. They include microprocessor-controlled units for panemounting to display analogue signals, RPM, speeds, processing times, quantities andelectronic preset counters for the detection of quantities or linear measurement aswell as electronic timer relays.

All units are distinguished by a high reliability and easy handling. Independent of thePLC they indicate operating states or signal faults. This helps to reduce downtimesand production loss.

ifm electronic offers the following evaluation systems:

Speed monitor

Standstill monitor

Slip- / synchronisation monitor

Direction monitor

Frequency-to-current converter

Threshold relay

Displays with frequency and analogue input

Counters

Switching amplifiers

Pulse evaluationsystems are used fordecentralised moni-toring of drives.

Machine cycles mustalso be monitored in

conveying.

Evaluation systems

146www.ifm.com

Universal speed monitors

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

Type FR-1 · dual-chamber terminals 2 x 2.5 mm² (2 x AWG 14) · plastics

110...240 AC/DC / 27 DC 1 PNP / NPN / Namur 1...60000 0.1...1000 1 2 2 1 DD2003

Speed monitor with integrated sensor

Type Sensingrange[mm]

Electricaldesign

Ub

[V]

Settingrange

[puls. / min.]

Start-updelay

[s]

Terminalconnection

no.

Draw-ingno.

Orderno.

10 f AC/DC 20...250 AC/DC 5...300 12 1 2 DI0001*

10 f DC PNP 10...36 DC 3...300 15 2 2 DI5001

10 f DC PNP 10...36 DC 3...300 15 3 3 DI5009

12 nf DC PNP 10...36 DC 3...6000 0...15 4 4 DI6001




Multifunctional displays for digital signals / frequency input

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

Type FX 360 · 10 screw terminals...1.5 mm² (DC and inputs) · plastics · AC/DC

115/230 2 PNP / NPN – – – – 2 5 DX2003

Universal counters

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

2 x screw terminal plug 7 poles; reference grid: 5.08 mm / 3.81 mm (X1 up to 2.5 mm*; X2 up to 1.5 mm*) · plastics

90...260 AC 1 PNP / NPN – – – 2 – 6 E89005

Evaluation systems

147www.ifm.com

Multifunctional displays for analogue standard signals

Type Ub

[V]

In-puts

Inputfunction

Settingrange

[puls. / min.]

Settingrange[Hz]

Out-puts

analog

Out-puts

relays

Out-puts

transist.

Draw-ingno.

Orderno.

terminals up to 2.5 mm² · plastics

– 1 4...20 mA – – 1 2 2 7 E89150

Accessories




Wiring diagrams

1

BN

BU

L+L1

LN

2

BN

BK

BU

L+

L

3

L+

L

1

4

3

4

4

L

L+1

2

3

2: pulse output (the pulsesequence corresponds to thedamping frequency), 4: swit-ching output (adjustable)


1

45

78

1 4 652

19 20 21 22 23 24

13 14 15 16 17 18

3

97A1 8A2 10 11 12

120

35,5

1


2

36

8167

58

5

M30

x1,5

9

18

2 LED

pot. 61

3

36

8266

59

5LED

M30

x1,5

M12

x1

92

pot.

4

M12

x1

77

5640

M18

x1

68

10

42421

1: 3 LED, 2: setting pushbutton

Evaluation systems

148www.ifm.com


5

96

48

129 9

6

48105

86,5 3

45

7

75

39

50 4

33

control panel cutout: 68 x 33 mm (according to DIN)

Evaluation systems

149www.ifm.com

Level sensors


Sensors for oils and coolants, LK12xx: approval to the German overspill standard WHG,section 19 153 - 153

Variable level sensors for water-based media (dielectric constant > 20) 153 - 153

Compact sensors for level and temperature monitoring 153 - 153

Sensors for hydrostatic level monitoring 154 - 154

Sensors for hydrostatic level monitoring in hygienic and wet areas 154 - 154

Sensors for oils and coolants, LI20xx: approval to the German overspill standard WHG,section 19 155 - 155

Accessories for level sensors LK, LR, LT, LL, LI 155 - 157

Accessories for level sensors PA, PG, PI, PN, PS, PY 157 - 158




Guided wave radar, capacitive andhydrostatic level sensors.

No movings parts means highreliability and long life.

Outputs for continuous or discretelevel measurement.

Integrated LED display for localindication of the current level.

Units suitable for common industrialand process fluids.

Level sensors

In industrial applications where fluids or bulk material are used, storage tanks or silosare used for processing or storing of media. Sensors are used to detect the levels.Even critical process conditions such as emptying a hydraulic tank or the uninten-tional overspill of a tank are monitored by level sensors.

Advantages of electronic sensors

Deposits and wear and tear often lead to failures in particular if mechanical switchesare in contact with the medium. The electronic ifm sensors however can do withoutany mechanical components. This makes the sensors especially robust and reliable.

Another advantage of electronic sensors is the local indication of the level or the easysetting of the switching threshold simply by pressing a button.

Measurement technique

For continuous level measurement the level is detected continuously, converted intoan electrical signal and indicated. Depending on the type the units have freely pro-grammable switching outputs or an analogue output for further processing.

Continuous level sensors from ifm electronic use three different physical measuringprinciples:

For capacitive measurement the probe and the tank form an electrical capacitor. Thecapacity changes with the level and is converted into a level measurement by amicroprocessor.

For hydrostatic level measurement a measuring cell detects the hydrostatic pressureof the material. Here the pressure change is a measure for the level.

The efector gwr level sensor operates on the principle of guided wave radar. Electro-magnetic pulses are transmitted by the sensor head and guided along the probe. Ifthe microwave pulse hits the medium to be detected, it is reflected and the time offlight is evaluated by the sensor.

Measurement inthe medium:Probe sensors willdirectly immersed inthe medium to bemonitored.

For special applica-tions: Capacitive

probe for monitoringoils and coolants.

Level sensors

152www.ifm.com

Sensors for oils and coolants, LK12xx: approval to the German overspill standard WHG, section 19

Type Probelength[mm]

Activezone[mm]

Inactive zone[mm]

Ub

[V]

Mediumtemperature

[°C]

Iload

[mA]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 1 x analogue 4...20 mA / 0...10 V (OUT2); 1 x normally open / closed programmable (OUT-OP) · DC PNP

264 195 53 / 15 18...30 – 200 1 1 LK3122

472 390 53 / 30 18...30 – 200 1 1 LK3123

728 585 102 / 40 18...30 – 200 1 1 LK3124

M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable · DC PNP

264 195 53 / 15 18...30 – 200 2 1 LK1022

472 390 53 / 30 18...30 – 200 2 1 LK1023

728 585 102 / 40 18...30 – 200 2 1 LK1024

M12 connector (according to EN 61076-2-101) · Output function 3 x normally open / closed programmable (OUT1...OUT3); 1 x normally open / closed programmabl (OUT-OP) · DC PNP

264 195 53 / 15 18...30 – 200 3 1 LK8122

472 390 53 / 30 18...30 – 200 3 1 LK8123

728 585 102 / 40 18...30 – 200 3 1 LK8124

Variable level sensors for water-based media (dielectric constant > 20)


Activezone[mm]

Inactive zone[mm]

Ub

[V]

Mediumtemperature

[°C]

Iload

[mA]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function normally open / closed programmable; 4...20 mA or 0...10 V · DCPNP

150...1600 L - 50 40/10 18...30 0...80 200 4 2 LR3000


150...1600 L - 50 40/10 18...30 0...80 200 2 2 LR7000


150...1600 L - 50 40/10 18...30 0...80 200 5 3 LR8000

Compact sensors for level and temperature monitoring


Activezone[mm]

Inactive zone[mm]

Ub

[V]

Mediumtemperature

[°C]

Iload

[mA]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector (according to EN 61076-2-101) · Output function 2 x normally open / closed programmable (level) 2 x normallyopen / closed programmable (temperature) · DC PNP

264 195 53 / 15 18...30 – 200 6 4 LT8022

472 390 53 / 30 18...30 – 200 6 4 LT8023

728 585 102 / 40 18...30 – 200 6 4 LT8024

Level sensors

153www.ifm.com

Sensors for hydrostatic level monitoring

Type Processconnection

Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 xanalogue (4...20 mA / 0...10 V; scaleable 1:4) · DC PNP/NPN

G¼ I Display unit -0.5...0.5 10 30 20...30 9 5 PN2069

Cable 3 m · Output function 4...20 mA analogue · DC

– – 0...0.25 2 2.4 10...30 7 6 PS3208


– – 0...0.6 4 4.8 10...30 7 6 PS3407


– – 0...1 5 6 10...30 7 6 PS3417

Sensors for hydrostatic level monitoring in hygienic and wet areas


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN

Aseptoflex Display unit -1...1 10 30 18...32 10 7 PI2099

Aseptoflex Display unit -0.0124...0.25 10 30 18...32 10 7 PI2098

Aseptoflex Display unit -0.05...1 10 30 18...32 10 7 PI2097

M12 connector · Output function 4...20 (20...4) mA analogue (scaleable 1:4) · DC




M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed pro-grammable or 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN

Aseptoflex Vario Display unit -0.005...0.1 4 30 18...32 9 8 PI2789


Aseptoflex Vario Display unit -1...1 10 30 18...32 9 8 PI2799

Aseptoflex Vario Display unit -0.05...1 10 30 18...32 9 8 PI2797


M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DCPNP/NPN

Aseptoflex Vario Display unit -0.005...0.1 4 30 18...32 10 9 PG2789


Aseptoflex Vario Display unit -1...1 10 30 18...32 10 9 PG2799

Aseptoflex Vario Display unit -0.05...1 10 30 18...32 10 9 PG2797


Level sensors

154www.ifm.com

Sensors for oils and coolants, LI20xx: approval to the German overspill standard WHG, section 19

Type Probe length

[mm]

Output Ub

[V]

Mediumtemperature

[°C]

Iload

[mA]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function · DC PNP

132normally open / closed

programmable10...36 – 200 8 10 LI5141


programmable10...36 – 200 8 10 LI5142


programmable10...36 – 200 8 10 LI5143


programmable10...36 – 200 8 10 LI5144

Accessories for level sensors LK, LR, LT, LL, LI


Mounting clamp · Ø 16 mm · Housing materials: PP E43000

Flange plate · 73-90 D16 · for capacitive level sensors LK, LI, LT, LL · according to DIN 24557 · Housing materials: aluminiumanodised / nut: stainless steel / Spacer: brass / rubber ring: FPM / sealing: NBR

E43001

Flange plate · 100-125 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainlesssteel / Spacer: brass / rubber ring: FPM

E43005

Flange plate · 65-80 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: aluminium anodised / nut: stainlesssteel / Spacer: brass / rubber ring: FPM

E43006

Welding adapter · Ø 50 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel/ Spacer: brass / rubber ring: FPM

E43002

Mounting adapter · G ¾ D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel/ Spacer: brass / rubber ring: FPM / sealing: Tesnit

E43003

Mounting adapter · G 1 D16 · for capacitive level sensors LK, LI, LT, LL · Housing materials: flange: stainless steel / nut: stainless steel/ Spacer: brass / rubber ring: FPM / sealing: Tesnit

E43004

Mounting adapter · G ¾ D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43008

Mounting adapter · G 1 D22 · for climatic tube LK / LI · Housing materials: stainless steel / NBR / Tesnit / brass E43009

Climatic tube · Length: 264 mm · for capacitive level sensors LK, LI · Housing materials: PPH / NBR E43100

Level sensors

155www.ifm.com





Flange plate · 73-90 / G ¾ · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing: NBR E43201

Flange plate · 73-90 / ¾„ NPT · for level sensors LR · according to DIN 24557 · Housing materials: flange: stainless steel / sealing:NBR

E43206

Flange plate · 65-80 / G ¾ · for level sensors LR · Housing materials: flange: stainless steel E43202

Probe · Probe length: 240 mm · for level sensors LR · Housing materials: stainless steel E43203






Protective cover · for LK / LL / LR / LT sensors · Housing materials: PP E43910

Coaxial pipe · Length: 240 mm · for level sensors LR · Housing materials: stainless steel / sealing: Tesnit / centring piece: PP / fixingbracket: stainless steel

E43211

Level sensors

156www.ifm.com



E43212


E43213


E43214


E43215


E43216


E43217

Coaxial pipe · Length: 450 mm · for level sensors LR · Housing materials: stainless steel / centring piece: PP / fixing bracket: stainlesssteel

E43218


E43219


E43220


E43221

Accessories for level sensors PA, PG, PI, PN, PS, PY


Protective cover · for fluid sensors with connector M12 · Housing materials: polyurethane E30006

Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571/ PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM

E30104

Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052

Level sensors

157www.ifm.com


Aseptoflex adapter · Clamp · 1-1.5„ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001

Wiring diagrams

1

L+

L3 BU

4 BK

2 WH

1 BN

Out-OPOut 2

4:2:

2

2

L

L+4

1

3Out 1Out 2

4:2:

3

Out-OP / Out 4

3

4

2

5

6

Out 1

Out 3

L+1

n.c.7

Out 2

L

4

L+

LOUT1OUT2

4:2:

4

2

1

3

5

L+

Ln.c.Out 4

Out 1Out 2

124

673

Out 35

6

Out 4

3

4

2

5

6

Out 1

Out 3

L+1

n.c.7

Out 2

L

7

BN

GY

WHL+

L

8

L+

L

1

4

3

9

4

L

L+2

1

3Out 1Out 2

4:2:

4

L

L+2

1

3Out 1Out 2

4:2:

4

1

3

2L+

LOut 1Out 2

4:2:

2

1

3

4L+

LOut 1Out 2

4:2:

10

4

1

3

2L+

L

2

1

3

4L+

L

11

4

1

3

2L+

L

L

P

2

L+

L

1

2

1

1: Normal operation, 2: Programming operation (P = communi-cation via EPS / FDT interface)

Level sensors

158www.ifm.com


1

30,5

64

M12

x1

4 3I1L

16

50

57A

I2

32

1

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4:Housing connection (flat-pin connector 6.3 mm following DIN 46244)

2

I1

L

50

57A

I2

32

1

7687

30

63

M12

x1

G 43

8 6

32

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming buttons

3

30

63

M12

x1

G 43

8 6

32

I1

L

50

57A

I2

32

1

7687

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming buttons

4

30,5

64

M12

x1

5

4 3I1L

16

50

57A

I2

32

1

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming buttons, 4:Housing connection (flat-pin connector 6.3 mm following DIN46244), 5: Position of the temperature measuring element

5

91,5

34

27

1,3

21,5

2 3

1

30

47

57,3

G

M12

x1

14

1 4/

1: 4-digit alphanumeric display, 2: LEDs (display unit / switching sta-tus), 3: Programming button

6

100

27

7

119

34

14,5

2 3

36

1

48

36

47

85M

12x1

4 5

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:Aseptoflex sealing edge, 5: Aseptoflex thread

Level sensors

159www.ifm.com


8

16,8

G1

64

M12

x1

105,

852

,8

50

34

1

2 3

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button

9

24

3

153

16,8

100

2

1

57

60,5

M12

x1

G1

1: Analogue display, 2: 4-digit alphanumeric display, 3: Programmingbutton

10

L

16

53

M12

x1

LED

21,3

1

16,6

A


Level sensors

160www.ifm.com

Level sensors

161

Flow sensors


Magnetic-inductive flow sensors with integrated temperature measurement (sealingmaterial FKM) 165 - 165

Magnetic-inductive flow sensors (sealing material FKM) 165 - 165

Compact housings for adapters for flow monitoring 165 - 165

Compact designs for adapter with flow and temperature monitoring 166 - 166

Compact housings for adapters for hygienic and wet areas 166 - 166

Mechatronic flow sensors for machine tools 166 - 166

Mechatronic flow sensors for liquids 167 - 167

Flow sensors for connection to control monitors, industrial applications 167 - 167

Flow sensors for connection to control monitors, industrial applications, titanium housing 167 - 167

Control monitors for industrial applications 168 - 168

Flow sensors for connection to control monitors with ATEX approval 168 - 168

Control monitors with ATEX approval 168 - 168

Air flow monitors 169 - 169

Compressed air meters 169 - 169

Compressed air meter for special gases 169 - 169

Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils) 170 - 170

Accessories for flow sensors and control monitors 170 - 171

Accessories for volumetric flow sensors 171 - 171

Grounding clamps for magnetic-inductive volumetric flow sensors 171 - 171




For liquids and gases.

Special versions for food applications and hazardous areas.

Optional fittings for variable process connection.

Flow monitoring also for aggressive media.

Flow sensors

In almost all fields of process and plant engineering liquids or gases are used forcoolant and lubricant supply of machines and units, ventilation of installations andbuildings and the processing of products. In case of no flow of these media consid-erable damage and downtime may result. Thus it is very important to monitor thatthese media are at the right place at the right time and in sufficient quantities. Inmodern installations electronic flow monitors are used for this purpose. They workwithout wear and tear and without mechanical components. This guarantees reliablemonitoring even in case of difficult media over a long period.

Operating principle

Electronic flow sensors from ifm electronic operate with different measurement tech-niques.

They meet all requirements from a simple monitoring function to the exact detectionof flow quantities.

Harmonised operating menus ensure that operators who use different flow sensorscan quickly and precisely carry out settings on the sensors.

Some flow sensors feature an integrated temperature monitor which makes anadditional measuring point unnecessary. This enables to control processes in theoptimum operating status especially with regard to energy savings.

Analogue, binary and pulse outputs offer various possibilities to process the mea-sured data. Due to the flexible programming by means of pushbuttons the flow sen-sors can be adapted to different conditions. The sensors are mounted via adapters.

Monitoring very smallflow rates: Flow moni-tor with flow adapter.

Optimisedconsumption ofcompressed air.

Flow sensors

164www.ifm.com

Magnetic-inductive flow sensors with integrated temperature measurement (sealing material FKM)


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · DC PNP/NPN

G½ 0.25...25.00 -10...70 16 < 0.150 19...30 1 1 SM6000

G1 0.7...100.0 -10...70 16 < 0.150 19...30 1 2 SM8000

Magnetic-inductive flow sensors (sealing material FKM)


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 mA analogue · DC

G½ 0...25 -10...70 16 < 0.150 19...30 2 3 SM6050

Compact housings for adapters for flow monitoring

Type Setting rangeliquids / gases

[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating[bar]

Responsetime[s]

Ub

[V]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...100 / 200...800 -25...80 30 1...10 19...36 4 SI5000


3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 5 SI5002

1/2“ UNF-Connector · Wiring diagram no. 5

3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 85...265 6 SI5006*


3...300 / - 3...100 -25...80 / - 300 1...10 19...36 5 SI5004


3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...2 / 1...10 19...36 5 SI5010



Flow sensors

165www.ifm.com

Compact designs for adapter with flow and temperature monitoring


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating[bar]

Responsetime[s]

Ub

[V]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...100 / 200...800 -25...80 300 1...10 19...36 5 SI5007

Compact housings for adapters for hygienic and wet areas


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Pressurerating[bar]

Responsetime[s]

Ub

[V]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 19...36 7 SI6000

3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 19...36 8 SI6100

3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 19...36 9 SI6200

3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 19...36 10 SI6600

3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 19...36 11 SI6700

3...300 / 200...3000 3...100 / 200...800 -25...95 30 1...10 19...36 12 SI6800

Mechatronic flow sensors for machine tools


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


G½ 0.3...25 0...60 200 < 0.01 24 7 13 SBU323

G½ 0.3...50 0...60 200 < 0.01 24 7 13 SBU324

G½ 0.3...75 0...60 200 < 0.01 24 7 13 SBU325

M12 connector · Output function analogue · DC

G½ 0.3...25 0...60 200 < 0.01 24 8 14 SBU623

G½ 0.3...50 0...60 200 < 0.01 24 8 14 SBU624

G½ 0.3...75 0...60 200 < 0.01 24 8 14 SBU625

Flow sensors

166www.ifm.com

Mechatronic flow sensors for liquids


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


Rp ¾ 1...15 0...85 25 < 0.01 24 7 15 SBY332

Rp ¾ 1...25 0...85 25 < 0.01 24 7 15 SBY333

Rp ¾ 2...50 0...85 25 < 0.01 24 7 15 SBY334

Rp 1 5...100 0...85 25 < 0.01 24 7 16 SBY346

Rp 1½ 20...200 0...85 25 < 0.01 24 7 17 SBY357

Flow sensors for connection to control monitors, industrial applications


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]

Max. T0gradient[K/min]

Pressurerating[bar]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 30 30 18 SF6200

3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 19 SF5200

Cable 6 m · Wiring diagram no. 10

3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 20 SF5350

3...300 / 200...3000 3...60 / 200...800 0...120 / 0...100 1...10 300 300 20 SF5300

Flow sensors for connection to control monitors, industrial applications, titanium housing


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]


Pressurerating[bar]

Draw-ingno.

Orderno.


3...300 / 200...3000 3...60 / 200...800 -25...80 1...10 300 300 19 SF5700


3...300 / 200...3000 3...60 / 200...800 0...120 / 0...100 1...10 300 300 20 SF5800

Flow sensors

167www.ifm.com

Control monitors for industrial applications

Type Ub / Tolerance

[V] / [%]

Currentconsumpt.

[mA]

Powerconsumpt.

[VA]

Power-ondelay time

[s]

Outputwhen flow is

present

Outputwhen temp. is exceeded

Outputin case of

wire break

Draw-ingno.

Orderno.

Combicon connector · Wiring diagram no. 15

/ -5 /+10 – 4 10...80 relay energised relay energised relay de-energised 21 SN0150*

Combicon connector · Wiring diagram no. 16

24 DC / +10 / -20

90 – 10...80 relay energised relay energised relay de-energised 21 SR0150*


19...36 DC 70 – 10no / nc

programmable– – 22 SR5900


Miniature fuse to IEC60127-2 sheet 1, Wire break monitoring. Recommendation: check the unit for reliable function after ashort circuit.

Flow sensors for connection to control monitors with ATEX approval


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]


Pressurerating[bar]

Draw-ingno.

Orderno.


3...300 / 200...2000 3...60 / 200...800 -20...60 1...10 15 300 23 SF211A

3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 24 SF221A

3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 25 SF321A


3...300 / 200...2000 3...60 / 200...800 -20...70 1...10 15 30 26 SF320A

Control monitors with ATEX approval

Type Ub / Tolerance

[V] / [%]

Currentconsumpt.

[mA]

Powerconsumpt.

[VA]

Power-ondelay time

[s]

Outputwhen flow is

present

Outputwhen temp. is exceeded

Outputin case of

wire break

Draw-ingno.

Orderno.

15 terminals...2.5 mm²

230 AC / ± 10 – 5 30 relay energised – relay de-energised 27 SN2301*

110 AC / ± 10 – 5 30 relay energised – relay de-energised 27 SN2302*

24 DC / ± 10 125 – 30 relay energised – relay de-energised 27 SR2301*


Miniature fuse to IEC60127-2 sheet 1, Wire break monitoring. Recommendation: check the unit for reliable function after ashort circuit.

Flow sensors

168www.ifm.com

Air flow monitors


[cm/s]

Greatestsensitivity

[cm/s]

Mediumtemperature

[°C]

Responsetime[s]

Ub / tolerance

[V] / [%]

Draw-ingno.

Orderno.


100...1000 100...400 -10...50 3...60 80...250 AC/DC 28 SL0101*


100...1000 100...400 -10...50 3...60 24 DC ± 25 % 28 SL5101



Compressed air meters

Type Setting range

[Nm3/h]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · DC PNP

0.7...75.0 0...60 16 < 0.1 19...30 17 29 SD6000

2.0...225.0 0...60 16 < 0.1 19...30 17 30 SD8000

3.5...410.0 0...60 16 < 0.1 19...30 17 31 SD9000

6...700 0...60 16 < 0.1 19...30 17 32 SD2000

Compressed air meter for special gases

Type Setting range

[Nm3/h]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA scaleable) · DC PNP

Ar: 0.8...118.2 / CO2: 0.5...71.7 / N2:0.5...73.0 Nm³/h

0...60 16 < 0.1 19...30 17 29 SD6100

Flow sensors

169www.ifm.com

Ultrasonic flow rate sensors for liquids (water, glycol solutions, oils)


Measuringrange

[l/min]

Mediumtemperature

[°C]

Pressurerating

[bar]

Responsetime

[s]

Ub

[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function OUT1: normally open / closed programmable or pulse OUT2: normally open / closed programmable or analogue (4...20 mA / 0...10 V, scaleable) · DC PNP/NPN

G¾ 0.1...50.0 -10...80 16 < 0.250 19...30 1 33 SU7000

G1 0.2...100.0 -10...80 16 < 0.250 19...30 1 34 SU8000

G1¼ 0.4...200.0 -10...80 16 < 0.250 19...30 1 35 SU9000

Accessories for flow sensors and control monitors


Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: titanium E40114

Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40115

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404

E40101

Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404

E40099

Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096

Welding adapter · M18 x 1.5 - Ø 23 mm · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: PE-100 E40138

Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel316L / 1.4404

E40124

Flow adapter (for low flow rates) · M12 x 1 - G 1/8 · for flow sensors and compact flow monitors with adapter · Housing materials:stainless steel 316L / 1.4404

E40129

Flow sensors

170www.ifm.com


Flow adapter (for low flow rates) · G ¼ - G 1/8 · for flow sensors and compact flow monitors · ¼„ · Housing materials: PVDF E40057

Accessories for volumetric flow sensors


Adapter · G ½ - R ½ · for flow monitor type SM6 · flat seal · Housing materials: stainless steel 316Ti / 1.4571 · Pack quantity: 2 E40199

Adapter · G ½ - G ¾ · for flow monitor type SM6 · flat seal · Housing materials: high-grade stainless steel E40189

Grounding clamps for magnetic-inductive volumetric flow sensors


Grounding clamp G½ · for flow monitor type SM6 · Housing materials: stainless steel E40196

Wiring diagrams

1

4

1

3

2 OUT2/InD

L+

L

BN

BUOUT1

WH

BK

2

L+

L3

2

4

1

n.c.

n.c. = not connected

3

L+

L

1

4

3

4

L

L+

3

2

4

1

S2 S1

5

1

3

4

2

5

n.c.

L1

N

Out

6

P

L+1

4

3

2L

P = programming wire (forremote adjustment)

7

3

L+

L

1

4

8

L+

L

1

3

2

9

2 WH

1 BN

4 BK

3 BU

5 GY

10

BU

BK

BN

WH

GY

11

BN

WH

BK

BU

123

789

GY

VS2000 Exi

12

123

789

VS2000 Exi

1 BN

2 WH

4 BK

3 BU

5 GY

Flow sensors

171www.ifm.com

Wiring diagrams

13

BN

WH

BU

BK

L1

N

L+

L

14

BN

WH

BU

BKL+

L

15

ACLN

12

11

10

9

8

7

6

5

421

19

18

17

5

4

1

3

2

GY

BK

BN

BU

WH

20

21

22

23

24

1

2

35

4

1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas

16

12

11

10

9

8

7

6

5

421

19

18

17

5

4

1

3

2

GY

BK

BN

BU

WH

20

21

22

23

24

1

2

35

4

DCL+L

1: Flow monitoring, 2: Wire break monitoring, 3: Temperaturemonitoring, 4: Power-on delay time, 5: Selection liquid / gas

17

L+

LOut 2Out 1

2:4: 3

4

2

1

L

L+

Out 2Out 1

2:4: 3

4

2

1


1

11073

M12 x1

16

G G2

1

21

M12 x1

54

2

G1

G1

11073

M12 x1

19

M12 x1

54

3

11073

M12 x1

16

G G2

1

21

M12 x1

54

Flow sensors

172www.ifm.com


4

22

1 2

113

60 65

14

7,7

4550

27

63

M12

x1

1: LED display, 2: setting pushbutton

5

22

1 2

113

60 65

14

8,2

45

50

27

63

M12

x1


6

22

1 2

113

60 65

14

8,2

45

50

27

63

" 20U

NF

2A2

1


7

27

63

M12

x1

154

106

7,7

5515

10,8

9

36

3

1 2

50

1: LED display, 2: setting pushbutton, 3: Aseptoflex thread

8

27

63

M12

x1

119

71

7,7

209

36

3

1 250


9

137

89

7,7

3815

10,8

9

36

3

1 250

27

63

M12

x1


Flow sensors

173www.ifm.com


10

M12

x134

7,7

5020

7111

9

27

63

1: LED display, 2: setting pushbutton, 3: G1/Aseptoflex Vario thread

11

M12

x1

34

7,710,8

50

3815

8913

7

27

63


12

M12

x1

34

7,710,8

50

5515

106

154

27

63


13

30

G2

1

57

8015

0...1

67

40

18

G 21

8068

40

6,3

26

14

8068

40

6,3

26

G2

1

57

8012

4,5

40

18

G 21

15

113...123,576,5

32

97...

105,

5

1313

Rp

43

Rp

43

16

17 17

42

120...12991,5

106.

..112

Rp

1

Rp

1

Flow sensors

174www.ifm.com


17

56

137...146,5121,5

121.

..127

,5

Rp

12

1

Rp

12

1

20 20

18

7,745

15

M12

x1

217

10

2025 146

19

M12

x1

8272

22

14

8,2

44

19 1

1: internal thread M18 x 1.5

20

8672

22

14

8,2

44

19 1

1: internal thread M18 x 1.5

21

103,5

35,5

25

100

2

1

LEDs

LEDs

1 2 3 4

5 6 7 8

9 10 11 12

21 22 23 24

17 18 19 20

1: Potentiometer (switch point flow), 2: Potentiometer (switch pointtemperature)

22

27

64

M12

x1

4

1 2

835248

50

19,7

3

1: LED display, 2: setting pushbutton, 3: connection for voltage sup-ply and output signals, 4: connection for flow sensor

23

17

57

122713

8,2

G4

1

24

17

57

122713

7,7G

41

25

124515

80

27

G2

1

7,7

26

M12

x1

124515

75

7,7

27

G2

1

Flow sensors

175www.ifm.com


27

45

78

1 2

19 20 21

13 14 15 16 17 18

3

97 8

+

120

35,5

1


28

140133

11332

23

2 LED

pot.2 LED

29

R

210300

16,1

21,3

M12

x1

100111

76,8

45

1 2


30

475375

27,3

33,7

R 1

M12

x1

100111

88,5

45

1 2


31

39R

112

275475

42

100111

M12

x1

120

451 2


32

133

451 2

54

R2 51

100111

M12

x1

275475


33

G4

3

G4

3

11096

100

80,5

M12

x1installation length with pipe adapter E40151 / E40154: 185 mm

34

80,5

M12

x1

G1

13096

100

G1

installation length with pipe adapter E40152 / E40155: 205 mm,installation length with pipe adapter E40153 / E40156: 215 mm

Flow sensors

176www.ifm.com


35

80,5

M12

x1

26

48

13096

100

G1

41

G1

41

Flow sensors

177www.ifm.com

Pressure sensors


Sensors with switching outputs and analogue outputs and display 181 - 181

Sensors with switching outputs and display 181 - 181

PK sensors with mechanical setting and switching outputs 181 - 181

PT sensors for industrial applications with analogue outputs 182 - 182

PT sensors for mobile applications with analogue outputs 182 - 182

PA / PPA sensors for industrial applications with analogue outputs / AS-i 182 - 182

Sensors for hydrostatic level monitoring 183 - 183

Sensors for pneumatic applications 183 - 183

PI sensors for hygienic and wet areas, 2-wire with analogue output 183 - 183

PI sensors for hygienic and wet areas with switching and analogue output 183 - 183

Full-metal sensors for hygienic and wet areas with switching output and analogue output 184 - 184

Electronic contact manometers for hygienic and wet areas with switching output and analogue output 184 - 184

Sensors for pump monitoring 184 - 184

PF sensors for hygienic and wet areas with switching and analogue output 185 - 185

PL / PM sensors without display for hygienic and wet areas with analogue output 185 - 185

Sensors for hygienic and wet areas with Profibus PA Interface 185 - 185

Fixing components for pressure sensors 186 - 186

Accessories and software 186 - 186

Adapters and accessories for adapters 186 - 186

Flange adapters 187 - 187




Transmitters or sensors with integrated control monitor.

Units with special design for hygienic applications.

Measuring principles with overload protection and a good long-term stability.

Measuring range from -1…600 bar.

Variable process connection and sealing technology via adapter.

Pressure sensors

ifm offers a wide range of electronic pressure and vacuum sensors to meet the re-quirements of various industrial applications. The ceramic-capacitive measuring cell,tried and tested a million times, is complemented by a stainless steel measuring cellwith thick-film wire strain gauges (series PK, PV, PT) and a piezoresistive measuringtechnique (for pneumatic applications).

All units have robust housings and do not require moving parts such as pistons orsprings. The result: the sensors are extremely shock and vibration resistant and ope-rate without any wear or maintenance.

The tried and tested ceramic-capacitive measuring principle is corrosion-resistant andlong-term stable. In the long run this guarantees continuous accuracy of the mea-sured values. The sensors are resistant to dynamic pressure peaks and guarantee highoverload resistance even in the case of extreme pressure peaks that occur for exam-ple with fast closing valves.

Units with wire strain gauge in thick-film technology on a stainless steel measuringcell are distinguished by their very compact and robust design. They can be used inalmost all industrial areas. The welded stainless steel measuring cell without any sealsensures a high degree of safety, in particular for applications with gas pressures ofup to 400 bar as well as in air-conditioning and refrigerating technology whereaggressive coolants (freons) are used.

The display: The7-segment displayshows the systempressure at a glance.

Separate display /programming unit

PP2001.

Pressure sensors

180www.ifm.com

Sensors with switching outputs and analogue outputs and display


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · DC PNP/NPN

G¼ I Display unit 0...400 600 1000 20...30 7 1 PN2020



G¼ I Display unit -1...25 100 350 20...30 7 2 PN2023





Sensors with switching outputs and display


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M8 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP

G 1/8 I Display unit -1...1 20 30 18...32 1 3 PQ7809

G 1/8 I Display unit -1...10 20 30 18...32 1 3 PQ7834

PK sensors with mechanical setting and switching outputs


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function normally open / closed complementary · DC PNP

G¼ A / M5 I Operation 0...400 600 1600 9.6...32 2 4 PK6520






G¼ A / M5 I Switching status 0...400 600 1600 9.6...32 1 4 PK7520




Pressure sensors

181www.ifm.com

PT sensors for industrial applications with analogue outputs


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


G¼ A – 0...400 600 1600 8.5...32 3 5 PT3540

G¼ A – 0...250 400 1000 8.5...32 3 5 PT3541

G¼ A – 0...100 200 1000 8.5...32 3 5 PT3542

G¼ A – 0...25 60 600 8.5...32 3 5 PT3543

M12 connector · Output function 0...10 V analogue · DC

G¼ A – 0...400 600 1600 16...32 4 5 PT9540

G¼ A – 0...250 400 1000 16...32 4 5 PT9541

G¼ A – 0...100 200 1000 16...32 4 5 PT9542

G¼ A – 0...25 60 600 16...32 4 5 PT9543

G¼ A – 0...10 25 300 16...32 4 5 PT9544

PT sensors for mobile applications with analogue outputs


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


G¼ A – 0...400 600 1600 8.5...32 3 5 PT3550

G¼ A – 0...250 400 1000 8.5...32 3 5 PT3551

G¼ A – 0...100 200 1000 8.5...32 3 5 PT3552

G¼ A – 0...25 60 600 8.5...32 3 5 PT3553

G¼ A – 0...10 25 300 8.5...32 3 5 PT3554

M12 connector · Output function 0...10 V analogue · DC

G¼ A – 0...400 600 1600 16...32 4 5 PT9550

G¼ A – 0...250 400 1000 16...32 4 5 PT9551

G¼ A – 0...100 200 1000 16...32 4 5 PT9552

G¼ A – 0...25 60 600 16...32 4 5 PT9553

G¼ A – 0...10 25 300 16...32 4 5 PT9554

PA / PPA sensors for industrial applications with analogue outputs / AS-i


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.


G¼ I – 0...600 800 1200 9.6...32 3 6 PA3060

G¼ I – 0...400 600 1000 9.6...32 3 6 PA3020

G¼ I – 0...250 400 850 9.6...32 3 7 PA3021

G¼ I – 0...100 300 650 9.6...32 3 7 PA3022

G¼ I – 0...25 150 350 9.6...32 3 7 PA3023

G¼ I – 0...10 75 150 9.6...32 3 7 PA3024

G¼ I – 0...2.5 20 50 9.6...32 3 7 PA3026

G¼ I – 0...1 10 30 9.6...32 3 7 PA3027

G¼ I – -1...0 10 30 9.6...32 3 7 PA3029

Pressure sensors

182www.ifm.com

Sensors for hydrostatic level monitoring

Type Measuringrange[bar]

Cable length /material

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

Output 4...20 mA analogue · Wiring diagram no. 5

0...0.253 m

PUR cable2 2.4 10...30 5 8 PS3208

0...0.610 m

PUR cable4 4.8 10...30 5 8 PS3407

0...112 m

PUR cable5 6 10...30 5 8 PS3417

Sensors for pneumatic applications


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function) · DC PNP/NPN

G 1/8 I Display unit -1...1 20 30 18...36 8 9 PN7809

G 1/8 I Display unit -1...10 20 30 18...36 8 9 PN7834

PI sensors for hygienic and wet areas, 2-wire with analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 (20...4) mA analogue (scaleable 1:4) · DC








G1 A Display unit -1...25 100 350 20...32 9 11 PI1693



G1 A Display unit -0.124...2.5 20 50 20...32 9 11 PI1696

G1 A Display unit -0.05...1 10 30 20...32 9 11 PI1697

G1 A Display unit -0.0124...0.25 10 30 20...32 9 11 PI1698


PI sensors for hygienic and wet areas with switching and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (I / U, scaleable 1:4) · DC PNP/NPN








Pressure sensors

183www.ifm.com

Full-metal sensors for hygienic and wet areas with switching output and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN





Aseptoflex Vario Display unit -0.05...1 10 30 18...32 7 12 PI2797




Electronic contact manometers for hygienic and wet areas with switching output and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP/NPN





Aseptoflex Vario Display unit -0.05...1 10 30 18...32 10 13 PG2797




G½ Display unit 0...250 600 1000 18...32 10 14 PG2451

G½ Display unit 0...100 300 700 18...32 10 14 PG2452

G½ Display unit -1...25 100 300 18...32 10 14 PG2453

G½ Display unit -1...10 50 150 18...32 10 14 PG2454

G½ Display unit -0.125...2.5 20 50 18...32 10 14 PG2456

G½ Display unit -0.05...1 10 30 18...32 10 14 PG2457

G½ Display unit -0.0125...0.25 10 30 18...32 10 14 PG2458

G½ Display unit -0.005...0.1 4 30 18...32 10 14 PG2489

Sensors for pump monitoring


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / normally closed programmable + 1 x normally open / normally closed programmable or 1 x analogue (4...20 / 20...4 mA, scalable) · DC PNP

Aseptoflex Display unit -1...25 100 350 18...32 11 10 PIM093

Aseptoflex Display unit -1...10 50 150 18...32 11 10 PIM094

G1 A Display unit -1...25 100 350 18...32 11 11 PIM693

G1 A Display unit -1...10 50 150 18...32 11 11 PIM694

Pressure sensors

184www.ifm.com

PF sensors for hygienic and wet areas with switching and analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V; scaleable 1:4) · DC PNP/NPN

G1 A Switching status -1...100 200 650 20...30 7 15 PF2652

G1 A Switching status -1...25 100 350 20...30 7 16 PF2653

G1 A Switching status -0.5...10 50 150 20...30 7 16 PF2654

G1 A Switching status -0.13...2.5 20 50 20...30 7 16 PF2656

G1 A Switching status -0.05...1 10 30 20...30 7 16 PF2657

G1 A Switching status -0.013...0.25 10 30 20...30 7 16 PF2658

PL / PM sensors without display for hygienic and wet areas with analogue output


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Output function 4...20 mA analogue · 3-wire DC; 2-wire DC

Aseptoflex – -1...25 100 350 14...30 12 17 PL2053

Aseptoflex – -0.5...10 50 150 14...30 12 17 PL2054

Aseptoflex – -0.13...2.5 20 50 14...30 12 17 PL2056

Aseptoflex – -0.05...1 10 30 14...30 12 17 PL2057

Aseptoflex – -0.0125...0.25 10 30 14...30 12 17 PL2058

G1 A – -1...100 200 650 14...30 12 18 PL2652

G1 A – -1...25 100 350 14...30 12 19 PL2653

G1 A – -0.5...10 50 150 14...30 12 19 PL2654

G1 A – -0.13...2.5 20 50 14...30 12 19 PL2656

G1 A – -0.05...1 10 30 14...30 12 19 PL2657

G1 A – -0.0125...0.25 10 30 14...30 12 19 PL2658


Aseptoflex – -1...25 100 350 14...30 12 20 PM2053

Aseptoflex – -0.5...10 50 150 14...30 12 20 PM2054

Aseptoflex – -0.05...1 10 30 14...30 12 20 PM2057

Aseptoflex – -0.0125...0.25 10 30 14...30 12 20 PM2058

Sensors for hygienic and wet areas with Profibus PA Interface


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector · Profibus PA, electrically isolated · Wiring diagram no. 6

Aseptoflex – -1...10 50 150 9...32 6 21 PMP094

Aseptoflex – -1...4 30 100 9...32 6 21 PMP095

Aseptoflex – -0.124...2.5 20 50 9...32 6 21 PMP096

Aseptoflex – -0.05...1 10 30 9...32 6 21 PMP097

Pressure sensors

185www.ifm.com

Fixing components for pressure sensors



Accessories and software



Protective cover · for fluid sensors · stainless steel with transparent Teflon window · Housing materials: stainless steel 316Ti / 1.4571/ PFA / EPDM / ventilation strip: Teflon film 0.32 mm / O-ring: EPDM

E30104

Programming/ display unit · for EPS and IO-Link sensors · Connector · Housing materials: stainless steel 316L / 1.4404 / EPDM/X / PCcopolymer / PBT / FPM

PP2001

IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link(4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110)

E30396

DIN rail clip · Housing materials: stainless steel E37340

Push-in air fitting · QS-G 1/8-6 · with hexagonal socket 4 mm a/f · for tube with Ø 6 mm · Housing materials: steel / PBT / brass /aluminium · Pack quantity: 4

E30076

Push-in air fitting · QS-G 1/8-8 · with hexagonal socket 5 mm a/f · for tube with Ø 8 mm · Housing materials: steel / PBT / brass /aluminium · Pack quantity: 4

E30077

Adapters and accessories for adapters


Adapter · R1/8 - R1/8 · rotatable · Housing materials: brass nickel-plated E37350

T pipe mounting set · G1/2 · with reducer G1/2 - G1/8, adapter R1/8 - R1/8 rotatable, seal G1/2 · Housing materials: brass nickel-plated

E37360

Welding adapter · G 1 - Ø 50 mm · Housing materials: stainless steel 316L / 1.4404 E30013

Pressure sensors

186www.ifm.com

Flange adapters


Aseptoflex adapter · Clamp · 1-1.5„ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33001

Aseptoflex adapter · Clamp · 2„ · ISO 2852 · for units with Aseptoflex adapter · Housing materials: stainless steel 316L / 1.4404 E33002

Welding adapter · Ø 50 mm · with Aseptoflex thread · Housing materials: stainless steel 316L / 1.4404 / O-ring: FPM FDA compliant E30052

Wiring diagrams

1

2

L

L+4

1

3Out 1Out 2

4:2:

2

4

L

L+1

2

32:4:

3

L+

L

1

2

4

L+

L

1

3

2

5

BN

GY

WHL+

L

6

PA

PA+2

4

1

3n.c.

n.c.

7

4

L

L+2

1

3Out 1Out 2

4:2:

4

L

L+2

1

3Out 1Out 2

4:2:

4

1

3

2L+

LOut 1Out 2

4:2:

2

1

3

4L+

LOut 1Out 2

4:2:

8

Out 1Out 2

4

L

L+2

1

34:2:

4

L

L+2

1

3Out 1Out 2

4:2:

9

4

1

3

2L+

L

L

P

2

L+

L

1

2

1

1: Normal operation, 2: Programming operation (P = communi-cation via EPS / FDT interface)

10

4

1

3

2L+

L

2

1

3

4L+

L

Pressure sensors

187www.ifm.com

Wiring diagrams

11

L+

LOut 2Out 1

2:4: 3

4

2

1

L

L+

Out 2Out 1

2:4: 3

4

2

1

12

L+

L

1

2

L+

L

1

3

2


1

30

47,8

59,6

G

M12

x1

16,5

1 4/

94,1

34

27

1,3

21,5

2 3

1


2

91,5

34

27

1,3

21,5

2 3

1

30

47

57,3

G

M12

x1

14

1 4/


3

4,2

354,75

3220

4232

30

20,7

11,3

1: main pressure connection G 1/8; tightening torque max. 8 Nm,thread length max: 7.5 mm, 2: for mounting screw M4; max. tighte-ning torque 2.5 Nm, 3: LEDs (display unit / switching status), 4: 4-digit alphanumeric display, 5: Programming button

4

61,6

12

M12 x127

27

71,6

G1 4/M5

7,5

21

1: tightening torque 25 Nm, 2: sealing FPM / DIN 3869-14

5

221

51,2

12

G1 4/

65,1

M12 x122

1: sealing FPM / DIN 3869-14, tightening torque 25 Nm

Pressure sensors

188www.ifm.com


6

77,5

M12 x130

30

27

1,3

21,5

16,5

G 41

7

75

M12 x130

30

27

1,3

21,5

14

G 41

8

100

27

9

1

2

10

178

20

3434

35,620

15

4,5

5

6 86,6

52,3

M12

x1

3548,4

7 M4

28,5

28,5

1: ventilation connection M5; max. tightening torque 2.5 Nm, 2:main pressure connection G 1/8; tightening torque max. 8 Nm, 3:Programming button, 4: LEDs (display unit / switching status), 5: 4-digit alphanumeric display, 6: for mounting screw M4; max. tighte-ning torque 2.5 Nm, 7: for mounting screw M4; max. tightening tor-que 2.5 Nm

10

119

34

14,5

2 3

36

1

48

36

4785

M12

x1

4 5

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:Aseptoflex sealing edge, 5: Aseptoflex thread

Pressure sensors

189www.ifm.com


11

G125,4

119

41

34

2 348

27

1

47

85M

12x1

20°


12

16,8

G1

64

M12

x1

105,

852

,8

50

34

1

2 3


13

24

3

153

16,8

100

2

1

57

60,5

M12

x1

G1

1: Analogue display, 2: 4-digit alphanumeric display, 3: Programmingbutton

14

3

169

22

100

2

1

24

75,5

57

M12

x1

G 21

1: Analogue display, 2: 4-digit alphanumeric display, 3: Touch button(programming button)

15

46,5

58M

12x1

41 20°

92

34

M12 x1

27,5

G125,4

1 2

1: 7-segment LED display, 2: Programming button

16

97,4

34

27,5

G125,4

48,51 2

46,5

63,1

M12

x1

41 20°

1: 7-segment LED display, 2: Programming button

Pressure sensors

190www.ifm.com


17

362

73

34

15M12 x1

87

48

1

1: Aseptoflex thread, 2: Aseptoflex sealing edge

18

41 20°1

34M12 x1

8127

G125,4

95,2

1: tightening torque 20 Nm

19

34M12 x1

48,5

85,3

27

G125,4

99,5

141 20°


20

36

107

34

15

M12 x1

121,

5

48

1 2

1: Aseptoflex sealing edge, 2: Aseptoflex thread

21

14,5

36

58

M12 x150

108 12

2,8

1 2

1: Aseptoflex sealing edge, 2: Aseptoflex thread

Pressure sensors

191www.ifm.com

Temperature sensors


Compact temperature sensors 195 - 195

Compact temperature sensors with display 195 - 195

Control monitors for temperature sensors 195 - 195

Control monitors for temperature sensors 196 - 196

Pt1000 probe sensors for standard applications 196 - 196

Cable sensors for standard applications 196 - 197

Cable sensors with bolt-on sensor for standard applications 197 - 197

Cable sensors for ATEX applications 3D 197 - 197

Temperature transmitters for standard applications 197 - 197

AS-i temperature transmitters for standard applications 197 - 197

Probe sensors for hygienic and wet areas 198 - 198

Cable sensors for hygienic and wet areas 198 - 198

Temperature transmitters for hygienic and wet areas 198 - 198

AS-i temperature transmitters for hygienic and wet areas 198 - 198

Accessories for temperature sensors TN / TR 198 - 199

Accessories and software 199 - 199

Adapters 199 - 200

Thermowells for temperature sensors 200 - 200




Increased process safety due to self-monitoring.

Compact units with integrated sensorsor modular systems.

Robust construction for high resistanceto shock and vibration.

Direct contact with medium orthermowell mounting.

Units with diverse redundant sensorsfor critical tasks.

Temperature sensors

The controlling and monitoring of temperatures are amongst the most importantmeasuring tasks in automation and process technology. In process technology forexample the right temperature is decisive for the quality and efficiency of the pro-cess. In automation technology an exact temperature detection is very important formonitoring installations and as protection against dangerous states. In heating andair conditioning economic and easy operation is not possible without temperaturemeasurement and control.

Operating principle

The temperature sensors of ifm electronic are based on a Pt100 or Pt1000 resistor.The measured temperature value corresponds to a change in resistance and is con-verted into an electrical analogue signal.

The microprocessor and the display make process adjustment much easier. The usercan set the values for the switch points, hysteresis and measuring range by means ofprogramming buttons even without the system temperature being applied. This en-ables installation and setup of the system within a few minutes.

Film technology is used for the electronic circuitry. A flexible, temperature-resistantand extremely resistant polyimide film is used as carrier of the SMD components.Together with a special potting method an extreme shock and vibration resistance isachieved.

From sensor to system

A complete temperature measurement system usually consists of several compo-nents. The temperature in a medium is detected by a sensor and is converted into anelectrical measured signal. The mechanical design and the dimensions of the sensorsmust vary to enable use for different media and measuring points. ifm electronicoffers a selection of robust probe sensors or types with connection cables. To indi-cate and process the measured value the sensor is connected to a separate controlmonitor.

For further processing, freely programmable switching or analogue outputs areavailable. If a local temperature display is not required, temperature transmitters arefrequently used. ifm electronic provides units with excellent response times (TAseries) that either have standard output signals or an integrated AS-i interface. Inhygienic applications the self-monitoring, calibration-free temperature transmitterTAD is an excellent choice.

Local display of thecurrent temperature.

Imperative:Temperature

detection in heatingand air conditioning.

Temperature sensors

194www.ifm.com

Compact temperature sensors

Type Measuringrange[°C]

Processconnection

Probe length

[mm]

Ub

[V]

Dynamic responseT05 / T09

[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

M12 connector · Output function normally open / closed complementary · DC PNP

-25...140 G¼ A 25 9.6...32 1 / 3 1 1 TK6130


-25...140 G¼ A 25 9.6...32 1 / 3 2 1 TK7130

Compact temperature sensors with display


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DC PNP/NPN

-40...150 M18 x 1.5 45 18...32 1 / 3 7 2 TN2531

M12 connector · Output function 2 x normally open / closed programmable · DC PNP/NPN

-40...150 M18 x 1.5 45 18...32 1 / 3 8 2 TN7531

Control monitors for temperature sensors


Processconnection

Display

LED

Ub

[V]

Currentconsump.

[mA]

Iload

[mA]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

M12 connector · Output function 4 x normally open / closed programmable · DC PNP

-40...150 G½ A Display unit 18...28 90 < 500 9 3 TR8430

M12 connector · Output function 1 x normally open / closed programmable + 1 x analogue (4...20 mA / 0...10 V, scalable) · DC PNP/NPN

-40...300 G½ A Display unit 20...30 55 250 10 3 TR2432

Temperature sensors

195www.ifm.com

Control monitors for temperature sensors


Processconnection

Display

LED

Ub

[V]

Currentconsump.

[mA]

Iload

[mA]

Wiringdiagr.

no.

Draw-ingno.

Orderno.


0...100 – – 20...32 – – 11 4 TP3237

Pt1000 probe sensors for standard applications


Diameter

[mm]

Probe length

[mm]

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

M12 connector · high-grade stainless steel

-40...150 6 160 1 x Pt 1000 1 / 3 3 5 TT1250

-40...150 6 360 1 x Pt 1000 1 / 3 3 5 TT3250

-40...150 10 160 1 x Pt 1000 1 / 3 3 6 TT1050

-40...150 10 260 1 x Pt 1000 1 / 3 3 6 TT2050

-40...150 10 50 1 x Pt 1000 5 / 14 3 7 TM0061

Cable sensors for standard applications


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

Cable 4 m · high-grade stainless steel

-30...180 M5 / L = 25.7 silicone cable 1 x Pt 100 3 / 8 4 8 TS4759

Cable with connector 2 m · high-grade stainless steel

-40...150 Ø 6 / L = 45 FPM (Viton) cable 1 x Pt 1000 3 / 10 3 9 TS2251


-50...250 Ø 6 / L = 50 PTFE cable 1 x Pt 100 11 / 37 3 11 TS2256




Temperature sensors

196www.ifm.com


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.





Cable sensors with bolt-on sensor for standard applications


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

Cable with connector 2 m · stainless steel

-25...90 M6 / 12 x 51 PUR cable 1 x Pt 100 9 / 15 3 15 TS2229

Cable sensors for ATEX applications 3D


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

Cable 5 m · high-grade stainless steel

-20...80 M6 / 10 x 42 silicone cable 1 x Pt 100 13 / 39 4 16 TS522A

Temperature transmitters for standard applications


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

M12 connector · high-grade stainless steel · DC

0...140 G¼ A 46.5 10...30 1 / 3 5 17 TA3130

AS-i temperature transmitters for standard applications


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.


-10...150 G¼ A 46.5 18...31.6 1 / 3 6 18 TAA131

Temperature sensors

197www.ifm.com

Probe sensors for hygienic and wet areas


Diameter

[mm]

Probe length

[mm]

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.

M12 connector · high-grade stainless steel

-40...150 10 110 1 x Pt 1000 1 / 3 3 6 TT0061

-40...150 10 160 1 x Pt 1000 1 / 3 3 6 TT1061

Cable sensors for hygienic and wet areas


Diameter

[mm]

Cablematerial

Sensorelement


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.







Temperature transmitters for hygienic and wet areas


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.


0...140 G½ A 87.5 10...30 1 / 3 5 19 TA3430

-10...150 G½ A 87.5 10...30 1 / 3 5 19 TA3431

AS-i temperature transmitters for hygienic and wet areas


Processconnection

Probe length

[mm]

Ub

[V]


[s]

Wiringdiagr.

no.

Draw-ingno.

Orderno.


-10...150 G½ A 87.5 18...31.6 1 / 3 6 20 TAA431

Accessories for temperature sensors TN / TR



Temperature sensors

198www.ifm.com



Accessories and software


IO-Link interface · for parameter setting and analysis of units with DTM specification · Supported communication protocols: IO-Link(4800 and 38400 bits/s) EPS protocol (19200 bits/s) · contains ifm Container software (E30110)

E30396

Adapters


Thread cover · Ø 26 mm - G ½ · to cover the G½ thread for installation in hygienic areas · for type TA · Housing materials: stainlesssteel 316L / 1.4404

E30090

Mounting set · for direct connection of temperature sensors TT to control monitors TR · Housing materials: stainless steel E30017

Mounting set · G ½ · for direct connection of temperature sensors TM to control monitors TR · Housing materials: stainless steel316L / 1.4404 / stainless steel

E30089

Clamp fitting · Ø 6/8/10 mm - G ½ · for temperature sensors TS / TT · Housing materials: stainless steel / FPM E30018

Clamp adapter · Ø 10 mm - G ½ · no dead space · Housing materials: stainless steel 316L / 1.4404 / FPM E34410

Welding adapter · M18 x 1.5 - Ø 24 mm · Insertion depth of the probe of SID, SFD, TN: · 15 mm · Housing materials: stainless steel316L / 1.4404

E40124

Welding adapter · G ½ - Ø 35 mm · ball · Housing materials: stainless steel 316L / 1.4404 E30055

Welding adapter · G ½ - Ø 45 mm · collar · Housing materials: stainless steel 316L / 1.4404 E30056

Progressive ring fitting for temperature sensors · Ø 10 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30016

Progressive ring fitting for temperature sensors · Ø 6 mm - G ½ · Housing materials: stainless steel 316Ti / 1.4571 E30047

Temperature sensors

199www.ifm.com


Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: titanium E40114

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: titanium E40128

Adapter · M18 x 1.5 - M12 x 1 · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404

E40101

Adapter · M18 x 1.5 - G ¼ · Insertion depth of the probe of SID, SFD, TN: · 13.5 mm · Housing materials: stainless steel 316L /1.4404

E40099

Adapter · M18 x 1.5 - G ½ · Insertion depth of the probe of SID, SFD, TN: · 21 mm · Housing materials: stainless steel 316L / 1.4404 E40096

Adapter · M18 x 1.5 - ½„ NPT · Insertion depth of the probe of SID, SFD, TN: · 23 mm · Housing materials: stainless steel 316L /1.4404

E40107

Thermowells for temperature sensors


Thermowell for temperature sensors · G ½ · Probe length: 53 mm · for type TA34xx, TAA431, TAD191 · Housing materials: stainlesssteel 316L / 1.4404

E30393

Thermowell for temperature sensors · Ø 10 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316L / 1.4404 E35010

Thermowell for temperature sensors · Ø 6 mm - G ½ · Probe length: 82 mm · Housing materials: stainless steel 316Ti / 1.4571 E37010

Hygienic thermowell · Ø 10 mm · Probe length: 45 mm · for temperature sensors Ø 10 mm · Housing materials: stainless steel 316L /1.4404

E34005

Thermowell for temperature sensors · Ø 10 mm · Probe length: 95 mm · for temperature sensors Ø 10 mm · Housing materials:stainless steel 316L / 1.4404

E34010

Wiring diagrams

1

4

L

L+1

2

32:4:

Temperature sensors

200www.ifm.com

Wiring diagrams

2

2

L

L+4

1

3Out 1Out 2

4:2:

3

1

2

3

4

4

RD

RD

WH

WH

5

L+

L

1

2

6

AS-i+1

3 AS-i

7

4

1

3

2L+

L

2

1

3

4L+

L

8

Out 1Out 2

4

L

L+2

1

34:2:

4

L

L+2

1

3Out 1Out 2

4:2:

9

TR 8430

L+

Ln.c.Out 4

Out 1Out 2

124

673

Out 353 (n.c.)

1 (n.c.)

4

2

10

L+

L

1 BN

2 WH

4 BK

3 BUTR 2432

1

2

3

4

2

B

1

2

3

4

3

1

1

2

3

4

B

B

1: Two-wire sensor, 2: Three-wire sensor, 3: Four-wire sensor, B:link

11

4

1

3

2L+

L

L

IO-Link1

2

3

4

1

2

3

4

1

2

3

4

B

B

TP

1: Two-wire sensor, 2: Four-wire sensor, 3: Operation as 2-wiretemperature transmitter, 4: Operation as 3-wire unit, IO-Linkcommunication possible, B: link

Temperature sensors

201www.ifm.com


1

39

M12 x127

2796

,5

25

8,2

G 41

87

2

4514

128

34

8,2

2 3

1

48

94,5

M12

x1

22 4

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:internal thread M18 x 1.5

3

93

34

16,5

G 21

2 3

1

30

48

60M

12x1

4

1: 4-digit alphanumeric display, 2: LEDs, 3: Programming button, 4:connection for temperature sensor

4

M12x1 17

M12x1

23,5

LED

20 50

2

1: connection for voltage supply and output signals, 2: connectionfor temperature sensor

5

18,5

L

5,95

M12

x1

21,5

401

6,2 13,8

6

1: plug area

6

8

L

10

M12

x1

21,5

18,5

401

1: plug area

7

1 2

M12

x136

45

4,5 10

50

30

1: Aseptoflex thread, 2: Aseptoflex sealing edge

8

80 ± 525,7

5,4

M54

8

8

9

M12

x1

64572

48

10

46

M12

x1

12

745 10

11

M12

x1

42,5 50 6

Temperature sensors

202www.ifm.com


12

50

12

10742

M12

x1

42,5

13

M12

x1

5825,7

5,4

M54

8

8

14

M12

x1

5825,7

2,5

M65

8

13 6,5

15

M12

x1

49,5

14 35

6,5

51

12

17

8,7

1,8

16

42

6,5

10

12

103

17

4460

8,2

M12x130

27

13,7

117,

7

13,5

G 41

18

5360

8,2

M12x130

27

14,9

127,

9

13,5

G 41

LED

19

G 21

43,8 123

8,2

10

M12

x130

27

18,3

13,7

47,5

180,5

LED

87,5

20

G 21

52,8 123

8,2

10

M12

x130

27

18,3

14,7

47,5

190,5

LED

87,5

Temperature sensors

203www.ifm.com

Diagnostic systems


Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE 207 - 207

Accessories VB / VE 207 - 207

Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK 207 - 207

Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE 208 - 208

Software 208 - 208

Accessories VSE 208 - 208

Vibration sensors for connection to external diagnostic electronics VSE - type VSA 208 - 208

Accessories VSA 209 - 209



Online vibration diagnosis – optimumprice / performance ratio.

Decentralised monitoring of plant and equipment integrated into the machine.

Compact field units and modular control cabinet units.

Digital and analogue alarm outputs.

Standard data interface (OPC).

Diagnostic systems

efector octavis is a vibration monitor which not only detects vibration data, but alsocarries out signal analysis and machine diagnosis directly on the machine. The ma-chine condition is determined and is forwarded to the PLC or to SCADA software. Itfulfils the main requirements for modern machine monitoring: compatibility, modu-larity and transferable configuration.

Compatible and modular

The compatibility with data structures such as the OPC interface makes it possible tointegrate condition data into a higher-level system. With the requirement for modu-larity the user can define the extent of condition monitoring to be implemented –this means the complete range of diagnosis is possible right from the “first unit”.Transferable configuration is attained with application-related parameter sets. Awizard function in the software guides the user through creating, managing andarchiving the monitoring parameters.

Trend memory

All units of the octavis family type VE / VSE feature an internal trend memory whichensures detailed analysis and optimisation of the application even without externaldata recording. The storage intervals are freely selectable. This means that the sto-rage length of the non volatile ring-memory is adjusted to the requirements.

The suitable system for your application:

Standard vibration characteristic values / permanent machine protection: VSE, VE, VK

Internal trend memory / root cause analysis: VSE, VE

Online diagnosis / early damage detection: VSE (VE partly)

Network capability of the system: VSE (VE partly*)

*Profibus DP gateway

Internal trend memory(type VE / VSE) of allmonitored diagnosisfactors can be evalu-ated via PC software.

Easy vibration moni-toring: type VK

provides a com-bination of switching

output and trans-mitter function in

conjunction with thetried and tested

easy-turn concept.

Diagnostic systems

206www.ifm.com

Compact vibration diagnostic units with g-monitor to ISO 10816 type VB/VE


Orderno.

Vibration diagnostic unit · Spectral analysis / FFT · Envelope-curve FFT · Peak · V eff RMS · Trend analysis · Connection viaM12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated / keypad: polyester

1 VE1001

Vibration diagnostic unit · Spectral analysis / FFT · Envelope-curve FFT · Peak · V eff RMS · Trend analysis · Connection viaM12 x 1 and M8 x 1 connectors · housing: diecast zinc nickel-plated

2 VE1101

Vibration diagnostic unit · ATEX approval · Group II, category 2D · Group II, category 2G · Spectral analysis / FFT ·Envelope-curve FFT · Trend analysis · Cable · housing: diecast zinc

3 VE113A

Accessories VB / VE


Parameter setting cable for efector octavis · ifm electronic · straight / straight · 3 m · Housing materials: PUR E11572

USB/RS485 adapter cable · ifm electronic · straight / straight E30098

Y connection cable · ifm electronic · 2 way · Free from halogen · 0.25 m · Housing materials: TPU E11664

Vibration monitors for vibration monitoring of machines and plants to ISO 10816 type VK


Orderno.

Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range Veff: 0...25mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404

4 VKV021

Vibration monitor · Connection via M12 connector · Vibration monitor to DIN ISO 10816 · Measuring range Veff: 0...50mm/s · Switching outputs: normally closed and analogue 4...20 mA · PBT / PC / FPM / stainless steel 316L / 1.4404

4 VKV022

Diagnostic systems

207www.ifm.com

Diagnostic electronics - control cabinet modules for vibration diagnosis type VSE


Orderno.

Diagnostic electronics for vibration sensors · 4 sensor inputs 0...10 mA · Ethernet interface · Switching output, Analogueoutput · Combicon connection · PA

5 VSE100

Software


Orderno.

Parameter setting software for VSExxx – VES003

Accessories VSE


Patch cable · Cross-over patch cable · Cable length 5 m E30112

Vibration sensors for connection to external diagnostic electronics VSE - type VSA


Orderno.

Vibration sensor · for connection to external diagnostic electronics · Connector · housing: stainless steel 316L / 1.4404 6 VSA001

Vibration sensor · for connection to external diagnostic electronics · Cable with connector · housing: stainless steel 316L /1.4404

7 VSA002

Vibration sensor · for connection to external diagnostic electronics type VSExxx · Cable · housing: stainless steel 316L /1.4404

8 VSA003

Diagnostic systems

208www.ifm.com

Accessories VSA


conical washer · Ø 8.4 / 15 mm · for efector octavis · Housing materials: stainless steel 316Ti / 1.4571 E30115


1

20 M5

M12

x1

46,458,2

14

65,3

36

37,6

5,35

10

4

M8x

1

LED

1


2

M12

x1

46,458,2

14

65,3

36

20 M5

37,6

5

10

4

5,3

M8x

1

3

20 M5

46,462,2

14

65,3

36

37,6

5

10

4

5,3

4

63,7

11

M12 x127

27

73,1

M81


5

50

114

LEDs

2

1

105

35,5

1: Ethernet interface, 2: Combicon plug with screw terminals (optio-nal)

6

18,5

M8x

1,25

M12

x117

5324

178

1

1: conical angle = 90°

7

13

M16

x1,5

14

2218

5

Diagnostic systems

209www.ifm.com


8

18

11,5

121500

5,5

Diagnostic systems

210www.ifm.com

Diagnostic systems

211

Bus system AS-interface


Controllers, gateways and software 215 - 215

AS-i repeaters 215 - 215

AS-i power supplies 216 - 216

I/O modules for control cabinets 216 - 216

Field modules IP67 217 - 218

Field modules IP69K and accessories 218 - 218

Module lower parts 218 - 219

Pneumatic and actuator solutions 219 - 220

Safety at Work 220 - 221

AS-i sensors 221 - 221

Combicon connectors 221 - 222

Flat cable splitters and accessories 222 - 222

Accessories Safety at Work 222 - 222

Accessories lower parts and addressing units 222 - 223

Accessories RFID 223 - 223



Manufacturer-independent standard.

Worldwide acceptance as a wiring system.

Communication from the sensor to the controller.

“Safety at Work” for safety-related applications.

Intelligent system solutions for special tasks.


AS-interface (AS-i = actuator sensor interface) is a manufacturer-independent stan-dard for the connection of actuators and sensors of the first field level. It is the onlywiring system accepted worldwide. With 15 million slaves installed AS-i has beentried and tested as a low-cost feeder for all common fieldbuses for many years.

The product range includes AS-i components for different areas from packaging andconveying via silo applications, machine tools, robotics and automation to the foodindustry and mobile vehicles.

Safe

The sophisticated AS-i technology and the extended diagnostic possibilities providehigh reliability and machine uptime.

“Safety at Work” is the extension of the AS-interface by safety-related components.Safety components up to the highest control category 4 to EN 954-1, SIL 3 to IEC61508 and EN ISO 13849 - 1 / PL e can be connected to AS-i.

Easy

Due to the standardised system, the low wiring complexity and the quick connectiontechnology, AS-i enables simple “Plug & Play”. The reduction of terminals leads toreduced documentation.

Data and energy are jointly transmitted via a two-wire cable. The reverse polarity pro-tected insulation displacement technology helps avoid errors. The modularity and thetree structure smoothly fit to the way the plant is put together.

Cost-optimised

It’s the end result that matters: wiring complexity, documentation and set-up timesare significantly reduced. The decentralisation of the AS-i participants leads tosmaller and less expensive control cabinets. Simple diagnosis and a clear systemdesign result in high machine uptime and avoid downtimes.

With “Safety atWork” AS-i alsosolves safety-related tasks.

Reduced cost:reduced wiring com-

plexity for fasterinstallation and fewer

error sources.


214www.ifm.com

Controllers, gateways and software

Type Numberof

AS-i masters

Description Draw-ingno.

Orderno.

1SmartLink DP · AS-i gateway / Profibus DP · Full master functions · Graphic display · Housing

materials: aluminium / steel sheet galvanised1 AC1375

1SmartLink DP · AS-i gateway / Profibus DP · Full master functions · Graphic display · Housing


2AS-i DP gateway · Full master functions · Graphic display · Profibus DP interface · Housing materials:

aluminium / steel sheet galvanised2 AC1326

2AS-i DP controller E · AS-i PLC with Profibus-DP interface · Full master functions · Graphic display ·

Housing materials: aluminium / steel sheet galvanised2 AC1346

1AS-i controller E · AS-i controller freely programmable · Profibus DP interface · Ethernet programming

interface · Full master functions · Graphic display · Housing materials: aluminium / steel sheetgalvanised

2 AC1355

2AS-i controller E · AS-i controller freely programmable · Profibus DP interface · Ethernet programminginterface · Full master functions · Graphic display · Housing for DIN rail mounting · Housing materials:

aluminium / steel sheet galvanised2 AC1356

2AS-i Ethernet / IP Controller E · Full master functions · AS-i version 2.1 · Graphic display · Housing


2AS-i DeviceNet controller E · AS-i controller with DeviceNet interface · Full master functions · Graphic

display · Housing materials: aluminium / steel sheet galvanised4 AC1314

–CodeSys for Automation Alliance · Software CD for Controller E German/English version 2.3 · Single

user licence– AC0340

AS-i repeaters


Orderno.

Passive AS-i bus termination · Extension of the cable to a maximum of 200 m without additional repeater · Improvementof the signal quality · Monitoring of the supply voltage by means of LEDs

– AC1147

AS-i tuner diagnostic module · Extension of the cable to a maximum of 200 m without additional repeater · Monitoring ofthe message quality · Display of critical states by „traffic light„ LEDs · PBT

5 AC1146


215www.ifm.com

AS-i power supplies

Type OutputcurrentAS-i [A]


Orderno.

2.8Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivatethe AS-i communication · NEC Class II Power Source · 85 watts · aluminium / steel sheet galvanised

6 AC1216

4Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate

the AS-i communication · Earth fault monitor integrated · 120 Watt · aluminium / steel sheetgalvanised

7 AC1224

2 x 4Power supply · AS-i dual power supply 115/230 V AC 2 x AS-i · Integrated data decoupling ·

aluminium8 AC1212

8Power supply · AS-i power supply 115/230 V AC · Integrated data decoupling · Jumper to deactivate

the AS-i communication · 240 watts · aluminium / steel sheet galvanised9 AC1218

I/O modules for control cabinets

Type Inputs /outputs


Orderno.

4 inputsActive AS-i module · String mounting possible · Addressing socket · Input supply from

external PELV voltage source · Version 2.1 with extended addressing mode · Digital inputs· Combicon connection · PA

10 AC2254

4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 · Digital

outputs · Combicon connection · PA10 AC2252

4 inputs / 3 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 withextended addressing mode · Digital inputs and outputs · Combicon connection · PA

10 AC2264

4 inputs / 4 outputsActive AS-i module · String mounting possible · Addressing socket · Version 2.1 · Digital

inputs and outputs · Combicon connection · PA10 AC2251

4 inputs / 4 outputs;bidirectional

Active AS-i module · String mounting possible · Addressing socket · External sensor supplyPELV · Version 2.1 · Digital inputs and outputs · Combicon connection · PA

10 AC2257

4 inputs 4...20 mAActive AS-i module · AS-i profile S-7.3 · 4 analogue inputs 4...20 mA · For the connectionof 2-wire, 3-wire or 4-wire sensors · Combicon connector for sensor connection · PA 6.6

10 AC2216

2 inputs / 1 LED output Active AS-i module · Only suited for mechanical contacts 11 AC2729

4 inputs / 3 outputs Active AS-i module · AS-i version 2.1 with extended addressing mode 12 AC2730


216www.ifm.com

Field modules IP67



Orderno.

4 inputsActive ClassicLine module · Version 2.11 and 3.0 with extended addressing mode ·Addressing socket · Three orientations of the flat cable are possible · Digital inputs ·

Sockets M12 x 1 · PA13 AC5215

4 outputsActive ClassicLine module · Addressing socket · Three orientations of the flat cable are

possible · Digital outputs · Sockets M12 x 1 · PA13 AC5208

2 outputs / 2 inputsActive ClassicLine module · Version 2.11 and 3.0 with extended addressing mode ·

Addressing socket · Three orientations of the flat cable are possible · Digital outputs andinputs · Sockets M12 x 1 · PA

13 AC5214

8 digital inputs (2 Slaves)Active ClassicLine module · Version 2.11 and 3.0 with extended addressing mode ·Addressing socket · Three orientations of the flat cable are possible · Digital inputs ·

Sockets M12 x 1 · PA14 AC5210


Active ClassicLine module · Addressing socket · Three orientations of the flat cable arepossible · Version 2.11 and 3.0 with extended addressing mode · Digital inputs and

outputs · Sockets M12 x 1 · PA14 AC5204

2 pushbuttons / 2 LED displaysActive module upper parts AS-i illuminated pushbutton module · Power supply via AS-i

cable · Colour inserts changeable · PBT15 AC2086

2 inputs 4...20 mAActive ClassicLine module · 2 analogue inputs 4...20 mA · For the connection of 2-wire

and 3-wire sensors · Addressing socket · Three orientations of the flat cable are possible ·PA

13 AC5222

– Active AS-i module 13 AC5230

4-way splitter boxPassive compact module · AS-i splitter box for the connection of intelligent

sensors/actuators · Sockets M12 x 1 · PUR16 AC2413

4 inputsActive CompactLine module · Version 2.1 with extended addressing mode · IR addressing

possible · Digital inputs · Sockets M12 x 1 · PUR16 AC2457

4 inputsActive CompactLine module · IR addressing possible · high-grade stainless steel · Digital

inputs · Sockets M12 x 1 · PA / stainless steel 316L / 1.440416 AC2451

4 outputsActive CompactLine module · IR addressing possible · Digital outputs · Sockets M12 x 1 ·

PA16 AC2417

2 inputs / 2 outputsActive CompactLine module · IR addressing possible · Digital inputs and outputs · Sockets

M12 x 1 · PA16 AC2411


217www.ifm.com



Orderno.


Active CompactLine module · IR addressing possible · Digital inputs and outputs · SocketsM12 x 1 · PA

17 AC2412


Active CompactLine module · IR addressing possible · Digital inputs and outputs · SocketsM12 x 1 · PA / stainless steel 316L / 1.4404

17 AC2452

Field modules IP69K and accessories



Orderno.

4 inputs / 3 outputsActive ProcessLine module · Version 2.1 with extended addressing mode · Protection

rating IP 69K · high-grade stainless steel · Digital inputs and outputs · Sockets M12 x 1 ·high-grade stainless steel / Makrolon / O-ring: EPDM

18 AC2904

8 digital inputs (2 Slaves)Active ProcessLine module · Version 2.1 with extended addressing mode · Protection

rating IP 69K · high-grade stainless steel · Digital inputs · Sockets M12 x 1 · high-gradestainless steel / Makrolon / O-ring: EPDM

19 AC2910

8-way splitter boxPassive splitter box AS-i ProcessLine · Protection rating IP 69K · high-grade stainless steel ·

AS-i and AUX splitter box for the connection of intelligent sensors/actuators · SocketsM12 x 1 · high-grade stainless steel / Makrolon

20 AC2900

4 inputs 4...20 mAActive AS-i module · 4 analogue inputs 4...20 mA · For the connection of 2-wire and 3-wire sensors · Threaded bush: stainless steel 316L / 1.4404 / Makrolon / O-ring: EPDM

21 AC2916

AS-i / 24 VFC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket · Metal

parts: stainless steel 316L / 1.4404 / Blanks: FPM / O-ring: EPDM– E70354

AS-iFC splitter · AS-i voltage via M12 socket · Metal parts: stainless steel 316L / 1.4404 / O-

ring: EPDM / socket: PP GF30 / blade seal: TPE– E70454

Module lower parts



Orderno.

FC coupling moduleModule lower part flat cable · AS-i interface to module upper part · Quick mounting

technology for AS-i flat cable · PBT22 AC5000

FC-E coupling module withexternal power supply

FC-E coupling module · AS-i interface to module upper part · Quick mounting technologyfor AS-i flat cable · PBT

22 AC5003

FC coupling moduleModule lower part flat cable · stainless steel · AS-i interface to module upper part · Quick

mounting technology for AS-i flat cable · PBT / stainless steel22 AC5014


218www.ifm.com



Orderno.

FC-E coupling module withexternal power supply

FC-E coupling module · stainless steel · AS-i interface to module upper part · Quickmounting technology for AS-i flat cable · PBT / stainless steel

22 AC5015

SC coupling module Module lower part set · AS-i interface to module upper part · Screw terminal · PBT 23 AC5031

Pneumatic and actuator solutions



Orderno.

2 inputs / 2 outputs; AirBoxsupply via AS-i

AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Addressing socket · AS-i profile S-3.F.F · PA

/ POM24 AC5227

4 inputs / 2 outputs; AirBoxsupply via AS-i

AS-i AirBox · 2 x 3/2-way slide valves free from overlapping · Three orientations of the flatcable are possible · AS-i flat cable connection · Version 2.11 and 3.0 with extended

addressing mode · Addressing socket · PA / POM24 AC5228

2 inputs / 1 outputDual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensors

integrated · Version 2.1 · Connector · PBT / PC / plug / socket stainless steel25 AC2310

1 x 2 inputsDual sensor · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1with extended addressing mode · Connector · PBT / connector housing: stainless steel

26 AC2315

2 inputs / 1 outputDual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensorsintegrated · Version 2.1 with extended addressing mode · Connector · PBT / PC / plug /

socket stainless steel25 AC2316

2 inputs / 2 outputsDual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensorsintegrated · Version 2.1 with extended addressing mode · Connector · PBT / PC / plug /

socket stainless steel25 AC2317

1 x 2 inputsDual sensor · Sensing range 4 mm · 2 inductive position sensors integrated · Version 2.1

with extended addressing mode · ATEX approval · Group II, category 3D · Connector · PBT/ connector housing: stainless steel

26 AC315A


219www.ifm.com



Orderno.

2 inputs / 1 outputDual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensorsintegrated · Version 2.1 with extended addressing mode · ATEX approval · Group II,

category 3D · Connector · PBT / PC / plug / socket stainless steel25 AC316A

2 inputs / 2 outputsDual sensor for actuator feedback · Sensing range 4 mm · 2 inductive position sensorsintegrated · Version 2.1 with extended addressing mode · ATEX approval · Group II,

category 3D · Connector · PBT / PC / plug / socket stainless steel25 AC317A

Safety at Work


Orderno.

AS-i safety monitor · Extended functionality · 1-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal

27 AC003S

AS-i safety monitor · Extended functionality · 2-channel · Control category 4 to EN954-1, IEC 61508 / SIL 3 and EN ISO13849 - 1 PL e · Configuration and setup by configuration software ASIMON · Screw terminal

27 AC004S

Safe active AS-i module · Control category 4 according to EN954-1 and IEC 61508 / SIL 3 · For the connection ofmechanical contacts · Combicon connection

28 AC009S

Safe active AS-i module · Connection via M12x1 sockets or cage clamps · Control category 4 according to EN954-1 andIEC 61508 / SIL 3 · Version 2.1 · For connection of an electro-sensitive protective equipment (ESPE) type 4 to EN 61496-1 ·

AS-i interface to FC-E lower parts29 AC007S

Safe AS-i input module · IR addressing possible · AS-i version 2.1 · Performance Level e to EN ISO 13849-1 for theconnection of mechanical contacts · Sockets M12 x 1 · PBT

30 AC005S

Illuminated E-STOP with integrated AS-i connection · Connector M12 x 1 · AS-i interface via AS-i flat cable IP 67 · fool-proof E-STOP to EN ISO 13850 / EN 418 · Pull to reset

31 AC010S

Safe active AS-i ClassicLine module · AS-i version 2.1 · IR addressing possible · Control category 4 according to EN954-1 ·For the connection of fail-safe inductive sensors of the control category 4 · Sockets M12 x 1

– AC016S


220www.ifm.com


Orderno.

AS-i safety PCB · Connection of mechanical contact and LED components · Certification according to EN 954-1 / category4 and IEC 61508 / SIL 3

11 AC015S

Fail-safe inductive sensor · GIMC-4030-US · Complies with the requirements: · EN ISO 13849-1:2008 category 4 PL e · SIL3 (IEC 61508) · Connector · PPE / diecast zinc

32 GM504S

Fail-safe inductive sensor · GIMC-4035-US · Complies with the requirements: · EN ISO 13849-1:2008 category 4 PL e · SIL3 (IEC 61508) · Connector · PPE / diecast zinc

32 GM505S

Fail-safe inductive sensor · GIGA-4015-US · M18 x 1 · Complies with the requirements: · EN ISO 13849-1:2008 category 4PL e · SIL 3 (IEC 61508) · Connector · cover: PBT / housing: high-grade stainless steel

33 GG505S

Fail-safe inductive sensor · GIIA-4030-US · M30 x 1.5 · Complies with the requirements: · EN ISO 13849-1:2008 category 4PL e · SIL 3 (IEC 61508) · Connector · PEEK / high-grade stainless steel

34 GI505S

AS-i sensors


Orderno.

Read/write head · DTSLF AARWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · PA 35 DTA100

Read/write head · DTSLF DCRWASUS01 · with integrated AS-i slave profile 7.4 · M12 connector · housing: PPE / Metalparts: diecast zinc / brass nickel-plated

36 DTA300

Combicon connectors


Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity:6

E70230


221www.ifm.com


Combicon connector · with screw terminals 4-pole · Housing materials: current carrying parts: copper alloy tin-plated · Pack quantity:100

E70231

Flat cable splitters and accessories


FC splitter · AS-i voltage via M12 socket · Housing materials: Metal parts: stainless steel 316L / 1.4404 / O-ring: EPDM / socket: PPGF30 / blade seal: TPE

E70454

FC splitter · V4A · AS-i voltage and external auxiliary voltage via the M12 socket · Housing materials: Metal parts: stainless steel 316L/ 1.4404 / Blanks: FPM / O-ring: EPDM

E70354

FC insulation displacement connector · Socket M12 - AS-i flat cable · Housing materials: PA E70096

Protective cap · M12 · for M12 socket to cover the unused inputs and outputs on the module; for unused inputs of splitter boxes ·for ProcessLine modules · Housing materials: PVC

E70297

Accessories Safety at Work


Connection cable PC / AS-i safety monitor · Parameter setting cable PC / AS-i safety monitor · Western connector RJ 45 8 poles / D-Sub socket 9 poles · 2.5 m

E7001S

bridging plug for safety modules · Housing materials: PUR E7005S

Accessories lower parts and addressing units


AS-i addressing unit · AS-i version 2.1 with extended addressing mode AC1144

Addressing cable · for AS-i slaves · 1.6 m E70213

Addressing cable · for the addressing of active AS-i compact modules E70123

Programming cable for controller E · Western connector RJ11 6 poles / D-Sub socket 9 poles · 1.55 m E70320


222www.ifm.com


Module lower part set · Screw terminal · Housing materials: PBT AC5031

Use of the lower part as branching box · Housing materials: plastics AC3000

AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules

AC4000

AS-i flat cable · reverse polarity protection due to special shape · for use in isolation displacement connector technology for FC lowerparts and compact modules

AC4002

AS-i flat cable · for the food industry · reverse polarity protection due to special shape · 100 m AC4007

AS-i flat cable · for the food industry · reverse polarity protection due to special shape · 100 m AC4008

JOKARI flat cable stripping tool E70062

Flat cable seal · Housing materials: ULTRAMID / sealing: NBR · Pack quantity: 10 E70413

Accessories RFID


ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302

ID tag · ID-TAG/D20x2.15/01 · Ø 20 x 2.15 mm · Housing materials: polycarbonate black E80317

ID tag · ID-TAG/ISO-Card/01 · 54 x 86 x 1 mm · Housing materials: PVC white E80320


223www.ifm.com


1

85

124

138

LED

62

4

6857

2

4

10797

86

124

131

LED

62

LED

3

4

10797

86

124

131

LED

62

LED

4

86

124

131

LED

LED

62

4

10797

5

44

83

90

M12 x1

LED

1 2

1: tune button, 2: mode selector

6

4

10796

49

124

131

Jumper

LED


224www.ifm.com


7

4

10796

73

124

131

LED

Jumper

8

113118,5

134

120

9

4

10796

91

124

131

Jumper

LED

10

105

35,5

25

114

LEDs

1

1: Addressing socket

11

921 U U UU

44

329 10 10

12

88

44

13


225www.ifm.com


14

15

4530

80

16

17 24

118

FE

60

107

39

4,5

36

LED M12x1

17

60

107

39

4,5

36

M12x1LEDFE

152

17 24

18

M12

x1

43,6

80137,3

M12 x1 LED

19

137,3

M12 x1 LED

M12

x1

43,6

80

20

M12

x1

43,6

80137,3

M12 x1


226www.ifm.com


21

137,3

M12 x1

1M

12x1

43,6

80

22

80

206

35

66

31

9,65,3

45

7 7

77

23

8082,5

336

35

66

45

9,65,3

31

7 7

77

24

2

4

0

1

0

1

9110

8

85

1 50

40

25

2635

LEDM12 x1

M12

x1

4055

LEDLED60

13 12


26

2635

LEDM12 x1

4055

LEDLED

60

13 12



227www.ifm.com


27

120

35,5

45

104

LED

28

105

35,5

25

108

LEDs

1

1: Addressing socket

29

45,5

49,4

8011

1

30

25

80

45

LEDM12x1

31

58,5

66,5

UU

UU

93,5

5610

5

M12

x1

72

80

32

40

M12

x1

4066

17

34

LED

4661

30 20

5,4

105,

4 68,

533

33

M18

x1

55 10

M12

x1

90,5

LED 8 x 45°

79

424

34

LED 4 x 90°

69

39

M30

x1,5

5

67

80

36

M12

x1

15


228www.ifm.com


355

2

41

4,517

56

17

4,25,5

M12 x1

24

5570

LED

2

1

53,5

1: integrated antenna , 2: tag positioning mark (middle of the anten-na)

36

92

80

40

7,565

65

5,59,3

M12

x1

112

40

LED171

20



229www.ifm.com

Multicode reading systems


Multicode reader 233 - 233




Orientation-independent identification of 1D and 2D codes.

Very small housing for flexible use.

Simple, menu-guided parameter setting.

Integrated lighting.

High reading reliability even with soiled / damaged codes.

Multicode reader

The ECC200 Data Matrix code is becoming more and more popular throughoutindustry alongside familiar barcodes. In this code lots of information can be stored ina very small space and read using the compact multicode reader. The industriallycompatible mounting and wiring technology as well as the standardised processinterfaces RS-232, Ethernet TCP/IP and EtherNet/IP enable easy and quick integrationinto the industrial control technology. Applications can be found in many differentindustrial areas: from the product tracking and production control to product identi-fication.

Orientation-independent reading

Independent of the orientation and the number of codes, the high-performancealgorithms automatically decode 1D or 2D codes. The optimisation parameters of thecodes and functions of the multicode reader undergo continuous development andare made available as upgrades.

Code comparison in the sensor

Complex application programming is no longer necessary due to adjustable, selec-tive code identification and comparison in the sensor. This allows a defined numberof characters within a code to be checked and signalled via the switching output ifthey match.

Reliable identification of 1D and 2D codes

In addition to the automatic exposure setting, manual adjustment is also possible. Sooptimum results are achieved even with highly reflective metal surfaces. For evalua-tion of the code quality parameter, ISO / IEC 15415 or 16022 can be used.

The Data Matrix code

The Data Matrix code is a two-dimensional code containing much more informationwith the same structure size than codes such as bar codes or stacked codes. Severalthousand characters can be stored in one code.

An important feature of the Data Matrix code is the high reading reliability. Ifthe code is soiled or damaged, the intelligent system can completely recomposethe information from different segments again. The Data Matrix code can bestructured differently and is variable in shape and size. The size can cover 1 x 1 mmto 100 x 100 mm.

Lose no time: themulticode reader canbe configured in afew minutes and isthen ready for use.Only five guided stepsare necessary for themulticode reader tobe ready for opera-tion. Whether printed

on paper, graved bylaser or dot-peened

on metal: reliable de-tection of the code,independent of thesensor orientation.


232www.ifm.com

Multicode reader

Type Dimensions

[mm]

Max.field of

view size[mm]

Typeof light

LED

Motion speedint. / ext. lighting

[m/s]

Processinterface

Draw-ingno.

Orderno.

M12 plug, 8 poles M12 socket, 4 poles

60 x 42 x 53.5 68 x 50 red light 3 / 5Ethernet TCP/IP,

EtherNet/IP, RS-2321 O2I100

60 x 42 x 53.5 140 x 100 red light 3 / 5Ethernet TCP/IP,


60 x 42 x 59 400 x 300 red light 3 / 5Ethernet TCP/IP,


Accessories


Plastic protective pane for the food industry · O2D / O2I · Housing materials: housing: diecast zinc black / lens: PMMA E21166

Glass protective pane · O2D / O2I · Housing materials: housing: diecast zinc black / lens: float glass E21168


E2D110


E2D112


mounting rod · Ø 14 / M12 · Length: 200 mm · angled · Housing materials: stainless steel 316Ti / 1.4571 E20941



233www.ifm.com


1

M12x1

2

19

M12x1

53,5

4,3

20,5

44

19,733

1

45

24,5

42

57

8060

21

9,57

3


2

M12x1

2

19

M12x1

42

57

8060

21

9,57

3 59

4,3

20,5

49,5

25,238,5

1

45

24,5



234www.ifm.com


235

RF-identification systems


RFID systems 239 - 239





RFID write and read heads and aselection of tags.

Industrial ident system using the125 kHz range.

Up to 31 compact read / write headsper evaluation module.

Read or write up to 15 bits within20 milliseconds.

Data interface to high end systems;Profibus, DeviceNet, ethernet and others.


The constant increase of the degree of automation in modern production plants isincreasingly supported by identification systems. Their tasks include for example thecontrol or release of production steps or the assignment of information about eachproduct.

The RF identification system (Radio Frequency Identification System) from ifm elec-tronic is a compact and easy alternative for applications in which for example opticalidentification is not possible due to the ambient conditions. It is also the first RF iden-tification system for AS-interface worldwide. It allows reading and writing of codecarriers (ID tags), benefiting from the advantages of AS-interface.

It can be integrated into existing AS-I networks without problem and is immediatelyready for operation. For reading, the RF identification system uses the AS-i analogueprotocol 7.4 for data transfer. Special software modules are not required. Up to 31read/write heads can be connected to one AS-i master.

The read/write head stores transmission errors which can be retrieved for a targetedfault analysis. Antenna, electronics and AS-interface are integrated in a compacthousing. The voltage is supplied via the AS-i network via a rotatable M12 connector.No additional operating voltage required.

The ID TAG (transponder) provides flexible mounting options for workpiece carriers,tanks, etc., ...

Operating principle

The RFID system from ifm electronic generates a 125 kHz electromagnetic field forreading and writing of data. The electromagnetic field emitted by the antenna indu-ces voltage in the passive ID tag (transformer principle). This activates the ID tag(transponder) which returns its code. Processing of the code and transmission to theAS-interface are carried out in the read / write head. Advantages: reliable data trans-mission in dynamic reading processes and ID tags for each application.

The read / write headsexchange data withthe passive ID tags ata maximum distanceof 20 mm. The ID tagprovides flexibility fordifferent types ofmounting.

The ID tag is mountedto tanks or workpiece

carriers – in the tagfixture or alternatively

by direct mountingusing an M5 grub

screw.


238www.ifm.com

RFID systems

Type Dimensions

[mm]

Travel speedread / write

[m/s]

Processinterface

Wiringdiagram

no.

Draw-ingno.

Orderno.

M12 connector

55 x 24 x 41 read: ≤ 0.5 (distance to the ID tag 15 mm) write: only static AS-i 1 1 DTA100

92 x 80 x 40 read: ≤ 0.5 (distance to the ID tag 40 mm) write: only static AS-i 1 2 DTA300

Accessories


ID tag · ID-TAG/TRIANGEL HOUSING/01 · with ID tag E80301 · Housing materials: PBT orange (RAL 2003) / PA black (RAL 9005) E80302

ID tag · ID-TAG/D20x2.15/01 · Ø 20 x 2.15 mm · Housing materials: polycarbonate black E80317

ID tag · ID-TAG/ISO-Card/01 · 54 x 86 x 1 mm · Housing materials: PVC white E80320


Wiring diagrams

1

AS-i+1

3 AS-i


239www.ifm.com


15

2

41

4,517

56

17

4,25,5

M12 x1

24

5570

LED

2

1

53,5

1: integrated antenna , 2: tag positioning mark (middle of the anten-na)

2

92

80

40

7,565

65

5,59,3

M12

x1

112

40

LED171

20



240www.ifm.com


241

Control systemsfor mobile vehicles


Inductive sensors for mobile applications 245 - 245

Electronic pressure sensors for mobile applications 245 - 245

Connection technology for control systems 245 - 245

Accessories for sensors for mobile applications 246 - 246



Controllers, I/O modules, displaysand sensors for mobile applications.

Compact and extremelyrobust design.

Extensive range of accessories forinstallation and diagnostics.

CAN interface with CANopen protocol.

e1 type approval of the GermanFederal Office for Motor Traffic.

Control technology for mobile applications

Life today cannot be imagined without electronics in modern motor vehicles andmobile machines. Many necessary and convenient functions could not be implemen-ted without electronic support. In contrast to electronics in consumer goods and“normal” industrial applications such as packaging machines and conveyors therequirements for components for mobile applications are much higher.

Electronic requirements

The components need to be carefully selected, mainly because of the extrememechanical stress caused by impacts and shocks and the use at extreme operatingtemperatures. The direct influence of dirt, humidity and water often cannot be ex-cluded in field applications. Therefore a high protection rating and a special selectionof the materials are required for the devices.

In addition to mechanical and environmental influences, electrical interference af-fecting the whole system as well as individual devices, have to be taken into account.A wide supply voltage range and well-adapted protective measures ensure safeoperation of the devices even in case of large voltage fluctuations by the battery /generator system. Strong conducted or radiated interference must not influence thefunction either.

For device networking the CAN bus has become the successful standard in the lastfew years. Whereas for the high volume production of passenger cars, special, opti-mised and well-adapted protocols are used, the CANopen protocol has become in-dispensable in mobile machines. Manufacturer and industry-specific protocols, suchas diagnostic engine data according to SAE J 1939, can be coupled to the machineprocess via gateways.

Extreme shock andvibration: Reliablefunction of the sensi-tive electronics mustbe guaranteed underharsh operating con-ditions as well.

Especially whenseveral machine parts

are interconnectedCAN offers decisive

advantages.


244www.ifm.com

Inductive sensors for mobile applications

Type Dimensions

[mm]

Sensingrange[mm]

Material Ub

[V]

Protection f

[Hz]

Iload

[mA]

Draw-ingno.

Orderno.


M12 / L = 70 4 f high-grade st. steel 10...60 IP67 / IP69K 400 200 1 IFM205

M12 / L = 70 7 nf stainless steel 10...60 IP67 / IP69K 300 200 2 IFM206

M18 / L = 70 8 f stainless steel 10...60 IP67 / IP69K 200 200 3 IGM204

M18 / L = 70 12 nf stainless steel 10...60 IP67 / IP69K 200 200 4 IGM205

M30 / L = 70 12 f stainless steel 10...60 IP67 / IP69K 100 200 5 IIM208

M30 / L = 70 22 nf stainless steel 10...60 IP67 / IP69K 100 200 6 IIM209


Electronic pressure sensors for mobile applications


Display

LED

Measuringrange[bar]

Poverload

max. [bar]

Pbursting

min. [bar]

UbDC[V]

Draw-ingno.

Orderno.

G¼ I – 0...400 600 1000 9.6...32 7 PA3020

G¼ I – 0...250 400 850 9.6...32 8 PA3021

G¼ I – 0...100 300 650 9.6...32 8 PA3022

G¼ I – 0...25 150 350 9.6...32 8 PA3023

G¼ I – 0...10 75 150 9.6...32 8 PA3024

G¼ I – 0...600 800 1200 9.6...32 7 PA3060

G¼ A – 0...400 600 1600 8.5...32 9 PT3550

G¼ A – 0...250 400 1000 8.5...32 9 PT3551

G¼ A – 0...100 200 1000 8.5...32 9 PT3552

G¼ A – 0...25 60 600 8.5...32 9 PT3553

G¼ A – 0...10 25 300 8.5...32 9 PT3554

G¼ A – 0...400 600 1600 16...32 9 PT9550

G¼ A – 0...250 400 1000 16...32 9 PT9551

G¼ A – 0...100 200 1000 16...32 9 PT9552

G¼ A – 0...25 60 600 16...32 9 PT9553

G¼ A – 0...10 25 300 16...32 9 PT9554

Connection technology for control systems




245www.ifm.com

Accessories for sensors for mobile applications


Programming/ display unit · for EPS and IO-Link sensors · Connector · Housing materials: stainless steel 316L / 1.4404 / EPDM/X / PCcopolymer / PBT / FPM

PP2001







1

5950

M12

x1

174

M12

x1

LED

70

2

45

M12

x1

174

5

M12

x1

5970

LED

3

M18

x1

M12

x1

5057

7059

424LED 4 x 90°

4

M18

x1

M12

x1

4057

70

LED 4 x 90°

59

10

424

5

59

53

M30

x1,5

57

70

M12

x1

LED 4 x 90° 536

6

LED 4 x 90°

59

38

M30

x1,5

5

57

70

36

M12

x1

15


246www.ifm.com


7

77,5

M12 x130

30

27

1,3

21,5

16,5

G 41

8

75

M12 x130

30

27

1,3

21,5

14

G 41

9

221

51,2

12

G1 4/

65,1

M12 x122

1: sealing FPM / DIN 3869-14, tightening torque 25 Nm


247www.ifm.com

Power supplies


Switched-mode power supplies 251 - 251



Range of regulated 24 V DC switchedmode power supplies.

Both 1-ph and 3-ph primaryside available.

From 1 amp up to 40 amp load.

Robust metal housing, easy and safe DIN rail mounting.

Robust metal housings with 35 mmrail mounting.

Power supplies

They may be unglamorous and unobtrusive, but without them it would not be pos-sible to operate an electronic system. Power supplies are essential. ifm offers low-cost transformer power supplies but also powerful switched-mode power suppliesfor different applications.

Transformer power supplies

Transformer power supplies provide a low voltage, normally 24 V DC. A transformeraccording to DIN 0551 ensures a safe electrical separation from mains voltage andlow voltage. The output voltage can be regulated (± 5 %) or smoothed by means ofcapacitors. The different designs and output powers allow adaptation to diverse op-erating conditions.

Switched-mode power supplies

Primary switched-mode power supplies are a compact and economical solution tosupply sensors and actuators. As opposed to conventional transformer power sup-plies with regulated output voltage they need no heavy transformers so that thereare fewer iron and copper losses. They are therefore distinguished by a very highdegree of efficiency of up to 92 %. Due to the operating principle by means of highfrequency transformers switched-mode power supplies are much smaller and lighterthan transformer power supplies with identical power. Nevertheless they guaranteean electrical separation. Furthermore, they offer a wide input voltage range as stan-dard for worldwide use.

Power reserves

Mains fluctuations up to ± 15 % and mains interference are compensated for. Evenmains voltage dips of a few milliseconds are compensated for, the output voltage iscompletely maintained. An active inrush current limitation reduces the inrush currentby means of a fixed resistor which is bridged after start up. The outputs are pro-tected against short circuits and overload. Special output characteristics allow acurrent which can be up to 1.7 higher than the nominal current without switch-offwith the voltage being reduced at the same time. The dimensioning of the compo-nents allows a 20 to 25 % higher output current for a short time. This power reserveis provided by all power supplies as from 2.5 A for a period of one minute. At an op-erating temperature of up to 45 °C this power is available continuously.

Suitable for theapplication: ifmprovides powersupplies in differentpower classes.

Power supplies

250www.ifm.com

Switched-mode power supplies

Type Current

[A]

Output voltage

[V]

Nominal voltage

[V]

Efficiencytyp.[%]

Draw-ingno.

Orderno.

1.3 24...28 DC (±2%) 115 / 230 AC 87.5 1 DN1020

2.1 24...28 DC (±2%) 115 / 230 AC 88.5 1 DN1021

5 24 DC (+5% / -1%) 115 / 230 AC 90 2 DN2012

10 24...28 DC (±2%) 115 / 230 AC 90 3 DN2013

20 24...28 DC (±2%) 230 AC 91 4 DN2014

5 24...28 DC (±2%) 3 x 400...500 AC 89 5 DN2032

10 24...28 DC (±2%) 3 x 400...500 AC 90 6 DN2033

30 24...28 DC (±2%) 3 x 400...500 AC 93 7 DN2036

40 24...28 DC (±2%) 3 x 400...500 AC 92.5 8 DN2035

1.25 24...28 – 84 9 DN1030

2.5 24...28 – 88 9 DN1031

2.5 24...28 – 87.1 10 DN3011

5 24...28 – 88.9 10 DN3012


1

35,5

9645

75 83

LEDpot.

2

124

64

LED 131

89

4

107

Power supplies

251www.ifm.com


3

89

4

107

124

120

131

LED

4

124

220

131

LED

227

89

4

107

5

124

73

LED

131

4 122

103

6

4

121110

90

124

131

3

2

1

6

5

4

1: LED red, 2: reset push button, 3: jumper „overload performance“,4: jumper „single/parallel operation“, 5: with pot., 6: LED green

7

89

4

107

124

240

131

LED

247

Power supplies

252www.ifm.com


8

89

4

107

124

275

131

282

LED

9

45 100

90

LED

1: with pot.

10

136144

136

50

129

1

LEDs

1: with pot.

Power supplies

253www.ifm.com

Connection technology


Sockets for industrial applications 257 - 258

Sockets for industrial applications 258 - 259

Cable plugs for industrial applications 260 - 260

Connection cables for industrial applications 260 - 261

Connection cables for industrial applications 261 - 261

Connectors for oils and coolants 261 - 262

Connectors for hygienic and wet areas 262 - 263

Connectors for mobile applications 263 - 264



Complete product range: sockets, plugs, jumper cables, splitter boxes.

Various cable materials for different applications.

High-quality materials for maximum reliability.

“ecolink” series with innovative quality features.

Integrated LEDs for easy diagnosis.


With a wide variety of different sensor designs ifm electronic offers a wide range ofhigh quality connectors. The choice of types covers common M8, M12, M18 typesthrough to valve plugs. The “ecolink” connectors (order no. EVxxxx) offer additionalquality features.

ecolink - a new dimension in connection technology

Due to the special installation of a mechanical end stop the O-ring is always correct-ly compressed and so permanently maintains its sealing function. The connectorremains securely positioned on the unit even in case of extreme vibration andimpacts. Novel design and a transparent black housing ensure that even in brightlighting conditions the LEDs are more clearly visible than with the clear transparentversions.

For industrial applications:

High-quality materials suited to the requirements in industrial environments. Largelyresistant to oils and greases.

For hygienic and wet areas:

PVC housing and cable, gold-plated contacts and high-grade stainless steel nuts arethe optimum choice for long life.

For oils and coolants:

With PUR housings, cable with full PUR sheaths, Viton seals and gold contacts, theseproducts set new standards for the harsh operating conditions of the machine toolindustry.

For hazardous areas

Connection technology for ATEX categories 2D, 3D and 3G. With the EC typeexamination certificate for components from DEKRA EXAM the connection technol-ogy meets the strictest requirements.

For welding applications

Halogen-free PUR cables prevent burning-in of weld spatter; teflon-coated couplingnuts prevent weld spatter sticking. The cables are also suited for drag chains and tor-sional movements.

For sensors in robust applications:

The saw tooth contoured vibration protection secures against strong shocks andvibrations. The high protection rating, wide temperature range and high-qualityhousing materials (high-grade stainless steel, TPU) ensure permanent safe connectionin harsh environments.

Black, transparenthousing for optimumLED visibility.

Maximum operationalreliability due to the

new vibration protec-tion with end stop.


256www.ifm.com

Sockets for industrial applications

Type Cable Wirespecification

Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Socket M8, 3-pole, 3-wire, straight

2 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm

TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 1 EVC141


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 1 EVC142


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 1 EVC143

Socket M8, 3-pole, 3-wire, angled


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 2 EVC144


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 2 EVC145


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 2 EVC146

Socket M8, 3-pole, 3-wire, angled, LED, PNP


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

3 EVC147


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

3 EVC148


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

3 EVC149



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 4 EVC150


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 4 EVC151


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 4 EVC152



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 5 EVC153


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 5 EVC154


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 5 EVC155



PUR /brass

60 AC75 DC

-25...85 IP68 – 6 E11490


PUR /brass

60 AC75 DC

-25...85 IP68 – 6 E11491



PUR /brass

60 AC75 DC

-25...85 IP68 – 7 E11487


PUR /brass

60 AC75 DC

-25...85 IP68 – 7 E11488


257www.ifm.com


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



PUR /brass

10...30 DC -25...85 IP68green /yellow

8 E11493

10 m blackPUR cable 3 x 0.34 mm2, Ø 5 mm

PUR /brass

10...30 DC -25...85 IP68green /yellow

8 E11494



PUR /brass

60 AC75 DC

-25...80 IP68 – 9 E11200


PUR /brass

60 AC75 DC

-25...80 IP68 – 9 E11201



PUR /brass

60 AC75 DC

-25...80 IP68 – 10 E11197


PUR /brass

60 AC75 DC

-25...80 IP68 – 10 E11198

Sockets for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Socket M12, 4-pole, angled

wirable ...0.75 mm2 (Ø 4...6 mm)PA /brass

250 AC/DC -25...100 IP68 – 11 E11509

Socket M12, 4-pole, straight


250 AC/DC -25...100 IP68 – 12 E11508

Socket M12, 4/5-pole, 4-wire, angled


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 13 EVC005


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 13 EVC006

Socket M12, 4/5-pole, 4-wire, straight


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 14 EVC002


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 14 EVC003

Socket M12, 4/5-pole, 4-wire, angled, LED, PNP


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow15 EVC008


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow15 EVC009



TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 16 EVC073


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 16 EVC074


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 16 EVC075


258www.ifm.com


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 17 EVC070


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 17 EVC071


TPU /brass

30 AC36 DC

-25...90IP67 / IP68 /

IP69K– 17 EVC072

socket M12, 8-pole, 7-wire + screen

2 m orangePUR cable 7 x 0.25 mm2 + screen

TPU /brass

30 AC36 DC

-25...90 IP67 – 18 E20738

socket M12, 8-pole, 8-wire, for temperature sensors TR 8...


PUR /brass

30 AC36 DC

-25...80 IP68 – 19 E11231


PUR /brass

30 AC36 DC

-25...80 IP68 – 19 E11232


PUR /brass

30 AC36 DC

-25...80 IP68 – 20 E11950


5 m blackPUR cable 8 x 0.25 mm2 TPU /

brass30 AC36 DC

-25...90 IP68 – 19 E12168


brass30 AC36 DC

-25...90 IP68 – 19 E12169



brass30 AC36 DC

-25...90 IP68 – 20 E12166


brass30 AC36 DC

-25...90 IP68 – 20 E12167

socket 1/2“, 2-pole + PE, 3-wire

2 m yellowPVC cable

3 x AWG22, Ø 5.2 mmTPU /brass

250 AC300 DC

-25...90 IP67 – 21 E10190

5 m yellowPVC cable 3 x 0.34 mm2, Ø 5.2 mm

TPU /brass

250 AC300 DC

-25...90 IP67 – 21 E10200

2 m yellowPVC cable


250 AC300 DC

-25...90 IP67 – 22 E10189

5 m yellowPVC cable


250 AC300 DC

-25...90 IP67 – 22 E10191

socket 1/2“, 5-pole, 4-wire


TPU /brass

300 AC -25...90 IP67 – 23 E11248


TPU /brass

300 AC -25...90 IP67 – 23 E11249


259www.ifm.com

Cable plugs for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Plug M12, 4-pole, angled


250 AC/DC -25...100 IP68 – 24 E11505

Plug M12, 4-pole, straight


250 AC/DC -25...100 IP68 – 25 E11504

Connection cables for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Jumper M8, 3-pole, 3-wire, straight / straight

0.3 m blackPUR cable 3 x 0.25 mm2, Ø 3.7 mm

TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 26 EVC265


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 26 EVC266


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 26 EVC267


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 26 EVC268


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 26 EVC269

Jumper M8, 3-pole, 3-wire, straight / angled


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC275


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC276


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC277


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC278


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 27 EVC279

Jumper M8, 3-pole, 3-wire, straight / angled, LED


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

27 EVC280


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

27 EVC281


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

27 EVC282


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

27 EVC283


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /yellow

27 EVC284


260www.ifm.com


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 28 EVC300


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 28 EVC301


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 28 EVC302


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 28 EVC303


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 28 EVC304



TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC310


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC311


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC312


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC313


TPU /brass

50 AC60 DC

-25...90IP67 / IP68 /

IP69K– 29 EVC314

Jumper M12, 4-pole, 4-wire, angled / angled


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 30 EVC034

Connection cables for industrial applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 31 EVC013

Connectors for oils and coolants


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 13 EVC005


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 13 EVC006



TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 14 EVC002


TPU /brass

250 AC300 DC

-25...90IP67 / IP68 /

IP69K– 14 EVC003


261www.ifm.com


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.

Socket M12, 4/5-pole, 4-wire, angled, LED, PNP


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow15 EVC008


TPU /brass

10...36 DC -25...90IP67 / IP68 /

IP69Kgreen /

2 x yellow15 EVC009

Connectors for hygienic and wet areas


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.


5 m orangePVC cable 3 x 0.25 mm2, Ø 5 mm

PVC / st. steel316L / 1.4404

60 AC75 DC

-25...85 IP68 – 32 E11498


60 AC75 DC

-25...85 IP68 – 32 E11499



PVC / st. steel316L / 1.4404

60 AC75 DC

-25...85 IP68 – 33 E11495


PVC / st. steel316L / 1.4404

60 AC75 DC

-25...85 IP68 – 33 E11496



PVC / st. steel316L / 1.4404

60 AC75 DC

-25...90 IP68 – 34 E11220


PVC / st. steel316L / 1.4404

60 AC75 DC

-25...90 IP68 – 34 E11221



PVC / st. steel316L / 1.4404

60 AC75 DC

-25...90 IP68 – 35 E11223


PVC / st. steel316L / 1.4404

60 AC75 DC

-25...90 IP68 – 35 E11224


2 m orangePVC cable 4 x 0.34 mm2, Ø 4.9 mm

PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 36 EVT067


PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 36 EVT004


PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 36 EVT005



PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 37 EVT001


PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 37 EVT002



PVC / st. steel316L / 1.4404

10...36 DC -25...100IP67 / IP68 /

IP69Kgreen /

2 x yellow38 EVT007


PVC / st. steel316L / 1.4404

10...36 DC -25...100IP67 / IP68 /

IP69Kgreen /

2 x yellow38 EVT008



PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 39 EVT050


262www.ifm.com

PVC / st. steel316L / 1.4404


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 40 EVT042


PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 40 EVT043


PVC / st. steel316L / 1.4404

250 AC300 DC

-25...100IP67 / IP68 /

IP69K– 40 EVT044



PVC / st. steel316L / 1.4404

30 AC36 DC

-25...100IP67 / IP68 /

IP69K– 41 EVT013



PVC / st. steel316L / 1.4404

30 AC36 DC

-25...100IP67 / IP68 /

IP69K– 42 EVT010


0.3 m orangePVC cable 5 x 0.34 mm2, Ø 5.1 mm

PVC / st. steel316L / 1.4404

30 AC36 DC

-25...100IP67 / IP68 /

IP69K– 43 EVT058


PVC / st. steel316L / 1.4404

30 AC36 DC

-25...100IP67 / IP68 /

IP69K– 43 EVT060


PVC / st. steel316L / 1.4404

30 AC36 DC

-25...100IP67 / IP68 /

IP69K– 43 EVT061


PVC / st. steel316L / 1.4404

30 AC36 DC

-25...100IP67 / IP68 /

IP69K– 43 EVT062

Connectors for mobile applications


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 44 EVM004


TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 44 EVM005


TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 44 EVM006


TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 44 EVM012


TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 44 EVM010



TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 45 EVM001


TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 45 EVM002


TPU / st. steel316L / 1.4404

250 AC300 DC

-40...90IP67 / IP68 /

IP69K– 45 EVM003


263www.ifm.com


Materialhousing/

nut

U

[V]

Ta

[°C]

Pro-tection

LEDs Draw-ingno.

Orderno.



TPU / st. steel316L / 1.4404

10...36 DC -40...90IP67 / IP68 /

IP69Kgreen /

2 x yellow46 EVM007


TPU / st. steel316L / 1.4404

10...36 DC -40...90IP67 / IP68 /

IP69Kgreen /

2 x yellow46 EVM008


TPU / st. steel316L / 1.4404

10...36 DC -40...90IP67 / IP68 /

IP69Kgreen /

2 x yellow46 EVM009

Jumper M12, 4/8-pole, 4-wire, straight / straight

2 m greenPUR cable

2 x 2 x 0.38 mm2,Ø 6.2 mm

PUR / PC /brass

– -25...70 IP67 / IP42 – 47 E11898


1

9

10 31

M8x1

2

9

10 19

M8x1 25,5

3

9

10 19

M8x1 25,5

LED

4

9

10 31

M8x1

5

9

10 19

M8x1 25,5

6

1810

27

M8x1

7

10

M8 x1

31

8

10

26

M8 x1 LED

17


264www.ifm.com


9

1028

M8 x1

18

10

10

M8 x1

31

11

35

18

20

M12 x1

30

12

18

M12 x1

46

13

15,5

M12x1 36,5

26,5

14

14

15,5

M12x1 45

14

15

15,5

M12x1 36,5

26,5

143 LED

16

15,5

M12x1 36,5

26,5

14

17

15,5

M12x1 45

14

18

43

15

M12 x1

19

15

38

M12 x1

28

10,5

20

15

M12 x1

43


265www.ifm.com


21

27

10,5

15

39

G 21

22

42

10,5

15

G 21

23

27

10,5

15

39

"-20UNF21

24

42

18

15

20

M12 x1

31

25

5220

M12 x1

26

9M8x1 9M8x1 9 M8x1

1010 10

3136 L

27

M8x1

9M8x1

1010

10

25,536 L

9

19

28

M8x1

9M8x1

1010

10

25,536 L

9

19

29

9M8x1 9M8x1 9 M8x1

1010 10

3136 L

30

L

M12x1

26,5

14

36,5

15,5M12x1

30,5

14

36,5

15,5

31

49,5

14

15,5

M12x1

45

14

L

15,5

M12x1

32

18

9

28

M8 x1

10


266www.ifm.com


33

10

M8 x1

31

9

34

18

9

28

M8 x1

10

35

10

M8 x1

31

9

36

15,5

M12x1 36,5

26,5

14

37

15,5

45

14

M12 x1

38

15,5

M12x1 36,5

26,5

14LED

39

L49

14

15,5

M12 x1

M12x136,5

15,5

26,5

14

40

L

15,5

M12 x1

49

14

45

15,5

M12 x1 14

41

15,5

M12x1 36,5

26,5

14

42

15,5

45

14

M12 x1

43

L

15,5

M12 x1

49

14

45

15,5

M12 x1 14

44

15,5

M12x1 36,5

26,5

14


267www.ifm.com


45

15,5

M12x1 45

14

46

3 LED

15,5

M12x1 36,5

26,5

14

47

23

M12

x1

47 L

12


268www.ifm.com


269www.ifm.com

ifm – worldwide: addresses

270www.ifm.com

Argentinaifm electronic s.r.l.Manuela Sáenz 3235º piso, oficina 3C1107BPA - Puerto MaderoBuenos Aires, ArgentinaTel. (011) 5353-3436Fax (011) 5353-3436Interior [email protected]/ar

Australiaifm efector pty ltd.P.O. Box 4084Suite 3, 745 Springvale RoadMulgrave VIC 3170Tel. 1300 365 088Fax 1300 365 [email protected]

Austriaifm electronic gmbhWienerbergstraße 41Gebäude E1120 ViennaTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/at

BangladeshSensotec AutomationRed Crescent Chamber87, Motijheel CommercialAreaDhaka 1000BangladeshTel. +880 171 546 [email protected]

BelarusDEPOSIT INVESTJoint-Stock CompanyBlock 2, 27 Zheleznodorovhnaya street220089 MinskRepublic of BelarusTel. +375-17-270 75 06Fax +375-17-270 75 [email protected]

Belgium andLuxembourgifm electronic n.v./s.a.Zuiderlaan 911731 ZellikBelgiëTel. +32 2 481 0220Fax +32 2 463 [email protected]/be

BoliviaBAVARIA S.R.L.Álvaro Baptista VargasZona Morocollo, Urb. SantosPariamoC. Mario Diaz de medina (26-A), Nr. 32La Paz - BoliviaTel.: 00-591-2-277 13 78Mobile: 00-591-720-47 [email protected]

Brazilifm electronic Ltda.Rua Eleonora Cintra, 140Jardim Analia Franco03337-000 São Paulo/SPTel. +55-11-2672-1730Fax [email protected]/br

Bulgariaifm electronic eoodul. Slatinska Nr. 92 A, ap. 2/31574 SOFIATel. +359 2 807 59 69Fax. +359 2 807 59 [email protected]

Canadaifm efector Canada Inc. 700 Dorval Drive/CorporateCentreOakville; L6K3V3 OntarioTel. +1-800-441-8246 Fax [email protected]

ChileElectronica IndustrialSchädler y Cia. Ltda.Av. Antonio Varas 1871Providencia6641545 SantiagoTel. +56 / 2 / 274 74 30Fax +56 / 2 / 204 93 [email protected]

Chinaifm electronic (Shanghai)Co., LtdBuilding 15, No 912Bi Bo Road, Pu Dong DistrictShanghai 201210, ChinaTel. +86-21-50278559 Fax +86-21-50278669Fax [email protected] www.ifm.com/cnifm electronic (HK) LtdUnit 2106, 21/F, Tower 2, MetroplazaNo. 223 Hing Fong Road, Kwai Chung, N.T., Hong Kong.Telefon: +852 3528-0462Fax: +852 [email protected]/hkifm electronic (Taiwan)Limited2C, Bao-Cheng EnterpriseTower,No. 6 Mincyuan Second Road,Cianjhen District, KaohsiungCity,Postal Code 806, Taiwan,R.O.C.Tel.: +886-7-335-7778Fax: [email protected]/tw

ColumbiaSENSOMATIC Y CIA LTDA.CALLE 1 C 25a - 50BOGOTA D.C. COLOMBIATel. +57 313 430 2264and +57 1 407 96 [email protected]://www.sensomatic-ltda.com

Croatiaifm electronic gmbhWienerbergstr. 41Gebäude EA-1120 WienTel. +43 / 1 / 617 45 00Fax +43 / 1 / 617 45 00 [email protected]/hr

Czech Republicifm electronic spol.s.r.o.U Křížku 571252 43 PragueTel. +420 / 2 / 67 990 211 Fax +420 / 2 / 67 750 180 [email protected]/cz

Denmarkifm electronic a/sRingager 4A, 1.sal tv.2605 BrøndbyTel. +45 70 20 11 08Fax +45 70 20 11 [email protected]/dk

Dominican RepublicWECH AUTOCONTROLES S. A.Ave. Romulo Betancourt 2158 Edificio WechUrb. RenacimientoSanto DomingoDominican RepublicTel.: + 1 809-531-0550Fax: + 1 [email protected]

EcuadorINSELEC CIA. LTDA.Av. de los AruposE1-202 y Pan. Norte- Km 5 ½QuitoTel. +593 2 28074- 76 - 78Fax +593 2 [email protected]

EgyptEgyptian Establishment forElectromechanical SuppliesMr. Ahmed Gouda27 Al-Salam StreetAl Arezona, Al Haram RoadGiza 12111, CairoTel. +20 / 2 / 586 49 49Fax +20 / 2 / 586 49 49Mobile +20 10 10 61 [email protected]

EstoniaPesmel Estonia LTDSegu 476505 SaueEstoniaTel.: +372 674 73 30 Fax: +372 674 73 [email protected]

Finlandifm electronic oyVaakatie 5 00440 Helsinki Tel. +358 / 9 / 751 777 00 Fax +358 / 9 / 751 777 10 [email protected]/fi

Franceifm electronicSiège :Savoie Technolac BP22673374 Le Bourget du LacAgence commerciale :Immeuble Uranus1-3 rue Jean Richepin93192 NOISY LE GRANDCEDEXTél: 0820 22 30 01Fax: 0820 22 22 [email protected]/fr

Germanyifm electronic gmbhFriedrichstr. 145128 EssenTel. +49 201 24 22 0Fax +49 201 24 22 12 [email protected]/de

Greeceifm electronic monoprosopiE.P.E.27, Andrea Papandreou Street15125 AmaroussiGreeceTel +30 210 61 800 90Fax +30 210 61 994 [email protected]/gr

HondurasR y D INDUSTRIALBo. Paz Barahona11 Ave. 14 y 15 CalleS.O. #142San Pedro SulaTelefon:+504 5503703Telefax:+504 [email protected]

Hungaryifm electronic kft.Közép u. 16. II.em. 208. irodaH-9024 GyőrTel. +36-96 / 518-397Fax +36-96 / [email protected]/hu

Indiaifm electronic India Pvt. Ltd.Plot No. P-39/1MIDC Gokul ShirgaonKolhapur – 416234Maharashtra State, IndiaTel. +91 / 231 / 267 27 70Fax +91 / 231 / 267 23 [email protected]/in

IndonesiaPT Indoserako SejahteraJl. P. Jayakarta 121 No. 5910730 Jakarta PusatTel. +62 / 21 6 24 8923Fax +62 / 21 6 24 [email protected]

Irelandifm electronic (Ireland) Ltd.No. 7, The CourtyardKilcarbery Business ParkNew Nangor RoadClondalkinDublin 22Tel. +353 / 1 / 413 60 66Fax +353 / 1 / 457 38 [email protected]/ie

IsraelAstragal Ltd.3, Hashikma Str.Azur 58001P.O. Box 99Azur 58190Tel. +972 / 3 / 5 59 16 60Fax +972 / 3 / 5 59 23 [email protected]

Italyifm electronicCentro Direzionale ColleoniPalazzo Andromeda 2Via Paracelo n° 1820041 Agrate Brianza (Milano)Tel. +39 / 039 68 99 982Fax +39 / 039 68 99 [email protected]/it

Japanefector co. ltd.Chiba Higashi Techno Green Park2-9-20 OkayamadaiTogane-shi, Chiba 283-0826Tel. +81 / 475 50 3003Fax +81 / 475 50 [email protected]/jp

JordanAl Mashreqan Trading SuppliesP.O.Box.85105411185 SwaifiehAmman - Jordan.Tel. +962 6 581 8841Fax +962 6 581 [email protected]

Koreaifm electronic Ltd.2F Hyundai Liberty House#201Hannam-Dong 258,Yongsan-Gu,Seoul, KoreaTel +82 2-790-5610Fax +82 [email protected]/kr

LatviaEC SystemsKatlakalna Str. 4A1073 RigaLatviaTel.: +371 724 1231Fax: +371 724 [email protected]

ifm – worldwide: addresses

271

LebanonMiddle East DevelopmentCo. SAL (MEDEVCO)Medevco Building Jeita Main Road Jeita - Kesrouan LebanonMail address :P.O.Box 67 Jounieh LebanonTel + 961-9-233550 Fax + 961-9-233554 [email protected]

LithuaniaElinta UABTerminalo g. 3, Biruliškių k.,Karmėlavos sen.LT-54469 Kauno raj. (Kauno LEZ)LithuaniaTel.: +370 37 351 999Fax: +370 37 452 [email protected]

Malaysiaifm electronic Pte. LtdMalaysian Branch OfficeNo. 2-4-2, Fourth FloorTower 2 @ PFCC, Jalan Puteri 1/2,Bandar Puteri Puchong,47100 Puchong, Selangor.Tel. +60 / 3 / 8063 9522Fax +60 / 3 / 8063 [email protected] electronicAsia Regional OfficeNo. 21, Jalan Kemunting,Taman Kebun The80250 Johor BahruJohor, West MalaysiaTel. +60 / 7 / 332 5022Fax +60 / 7 / 332 [email protected]

Mexicoifm efector S. de R.L. de C.V.Anillo Periférico, 1816-1Col. Hacienda San JerónimoMonterrey, N.L.Mexico 64630Tel. +52-81-8040-3535Fax +52-81-8040-2343www.ifmefector.mx

Netherlandsifm electronic b.v.Deventerweg 1 E3843 GA HarderwijkTel. +31 / 341 438 438Fax +31 / 341 438 [email protected]/nl

New Zealandifm efector pty ltd.Unit B, 20 Cain RoadPenrose, AucklandTel. +64 / 95 79 69 91Fax +64 / 95 79 92 [email protected]/nz

NigeriaAutomated Process Ltd3rd Floor, 32 Lagos AbeokutaExpresswayNear Cement Bus StopDopemu, AgegeLagos State, NigeriaTel. + 234 / 01 / 4729 967Fax + 234 /01 / 4925 [email protected]

NorwaySiv.Ing. J.F.Knudtzen ASBillingstadsletta 971396 BillingstadPostboks 1601378 NesbruTel. +47 / 66 98 33 50Fax +47 / 66 98 09 [email protected]

OmanTechnical Engineering Company LLC.P.O.Box. 59 Madinat Al Sultan QaboosPostal Code 115 Sultanate of OmanTel + 968 24503593Fax + 968 [email protected]

PakistanAB AutomationShop No.2. Rubab ChamberM.A. Jinnah RoadOff Sarai RoadKarachiTel. +92 / 21 / 2412 278Fax +92 / 21 / 2422 [email protected]

Perudekatec s.a.c.Los Calderos 188Urb. Vulcano, AteLima / PeruTel. +511 / 348 0293Tel. +511 / 348 0458Tel. +511 / 348 2269Fax +511 / 349 [email protected]

PhilippinesGram Industrial, Inc.Unit 410 Common GoalTowerFinance cor. Industry St.,Madrigal Business Park,Ayala Alabang, MuntinlupaCity1770 Philipines Tel. (+63) 2 850-2218Fax (+63) 2 [email protected]

Polandifm electronic Sp.z o.o.ul. Kosciuszki 175PL 40-524 KatowiceTel. +48 / 32 / 60 87 454Fax +48 / 32 / 60 87 [email protected]/pl

Portugalifm electronic –Sucursal em PortugalAvenida da Republica 25034430-208 Vila Nova de GaiaTel. +351 / 22 / 37 17 108Fax +351 / 22 / 37 17 [email protected]/pt

Romaniaifm electronic s.r.l.Str. Cristian Nr. 5550073 SibiuTel.: 0040 269 224550Fax: 0040 269 [email protected]

Russiaifm electronicIbragimova, 31, k.50office 607105318 MoscowTel.: +7 (495) 921-44-14Fax: +7 (495) [email protected]/ru

Saudi ArabiaNoor Al-Shomoe for Electric& MaintenanceKing Khalid Street, Cross 5P.O. Box 2571Al-Khobar 31952Kingdom of Saudi ArabiaTel. +9 663 864 49 58Fax +9 663 894 63 [email protected]

Singaporeifm electronic Pte. Ltd.25, Intern. Business Park#03-104 German Center609 916 SingaporeTel. +65 / 6 / 5 62 86 61Fax +65 / 6 / 5 62 86 [email protected]/sg

Slovakiaifm electronic spol. s.r.o.Rybnicna 40831 06 BratislavaTel. +421 / 2 / 44 87 23 29Fax +421 / 2 / 44 64 60 [email protected]/sk

South Africaifm electronic (pty) LtdShorrok HouseRoute 21 Corporate ParkNellmapius Drive, Irene Ext. 30, Centurion 0157, Pretoria Postnet Suite 279Private bag X8Elardus Park0047Tel. +27 (0) 861 IFM RSA /436 772Fax +27(0)12 450 [email protected]/za

Spainifm electronic s.l.Edificio Prima Muntadas AParc Mas BlauC/Berguedà 108820 El Prat de LlobregatTel. +34 / 93 / 479 30 80Fax +34 / 93 / 479 30 [email protected]/es

Swedenifm electronic abHallavägen 10 512 60 Överlida Office Gothenburg:Drakegatan 641250 GothenburgTel. +46 / 325 / 66 15 00 Tel. +46 / 325 / 66 15 50Fax +46 / 325 / 66 15 [email protected]/se

Switzerlandifm electronic agAltgraben 274624 HärkingenTel. +41 / 62 / 388 80 30Fax +41 / 62 / 388 80 [email protected]/ch

SyriaI.E.C. Industrial EngineeringCenterP.O. Box 15 Sehnaya, DamascusSyriaTel. + 963 11 532 13 19Fax. + 963 11 442 12 [email protected]

ThailandSang Chai Meter Co., Ltd.694/16-19 Phaholyothin RoadSamsen Nai, Phayathai Bangkok 10400 Tel. +66 / 2 / 616 8051Fax +66 / 2 / 616 [email protected]

Turkeyifm electronic Elektrikli ve Elektronik Aletlerİth.İhr.Paz.Tic.Ltd.Şti. Merkez Mah. Nadide Sok. Anıttepe Sitesi No:28 34381 Şişli / İstanbulTel. +90 / 212 / 210 5080Fax +90 / 212 / 221 [email protected]/tr

Ukrainaifm electronicMariny Raskovoj 1102660 KievUkraineTel. +380 44 501 8543Fax +380 44 501 [email protected]/ua

United Arab EmiratesNoor Al-Shomoe ElectricalEquipments Est.P.O.Box. 64052Unit no. 36Reef Real EstateJebel Ali Industrial Area no. 3DubaiUnited Arab EmiratesTel.. + 971 4 880 3838Fax.+ 971 4 880 3883Mobile: + 971 [email protected] Arab Emirates –Abu DhabiAl Injazat Technical Trading ServicesP.O. Box 42895Abu DhabiUnited Arab EmiratesTel. +971 2 622 6030Fax +971 2 622 [email protected]

United Kingdomifm electronic Ltd.efector HouseKingsway Business ParkOldfield RoadHamptonMiddlesex TW12 2HDTel. +44 / 20 / 8213 0000Fax +44 / 20 / 8213 [email protected]/uk

USAefector inc.805 Springdale Drive Exton, PA 19341 Tel. +1 / 610 524 2000 Fax +1 / 610 524 [email protected]

VenezuelaPetrobornas, C.A.C.C. Los Pinos - Local EAv. Principal de la UD 304(8015) - Puerto Ordaz - Edo.BolivarVenezuelaTel. +58 286 994 3406Tel. +58 416 686 5036Fax +58 286 994 [email protected]

VietnamThien Viet Electrical Serviceand Trading Co., Ltd.784 Dien Bien Phu Str.Ward 11, Dist. 10Ho-Chi-Minh-City, Viet NamTel. +84 / 8 / 830 9916 Fax +84 / 8 / 830 [email protected]

www.ifm.com

7844 x - ifm · 2010 fluid sensors and diagnostic systems bus, identification and control systems...

Documents