8. level 3 repair...confidential and proprietary-the contents in this service guide subject to...
TRANSCRIPT
![Page 1: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/1.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-1. Components Layout
![Page 2: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/2.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
![Page 3: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/3.jpg)
SENSOR
APSDM845
UFS memory64GB
AudioCodec
WCD9341CODEC_RST_N
CODEC_SPI_MISO, CODEC_SPI_MOSICODEC_SPI_CLK, CODEC_SPI_CS_N
SLIMBUS_CLKSLIMBUS_DATA0,1
CODEC_INT1_NVOICE_INT
SPK AmpMAX98512
AMP_SCL_1P8, AMP_SDA_1P8
RCV AmpMAX98512
AMP_I2S_BCLK, LRCKAMP_I2S_D_IN, OUT
SPK_AMP_OUT_P, N
SPK_OUT_FB_P
SPK
RCV_AMP_OUT_P, N RCV
SPK_OUT_FB_N
RCV_OUT_FB_P
RCV_OUT_FB_P
EAR_L/G_DETEAR_MIC_P/N EAR MIC
EAR_OUT_L/R
MAIN_MIC_CLK/DATA
SUBPBA
EAR L/R
MAIN MIC
EAR_OUT_FB
CODEC_MCLK
FM RadioRTC6213N
FM_SCL_1P8, FM_SDA_1P8FM_SLEEP_CLK
FM_L, R
FM_INT[SM‐G9650] Logic Block Diagram
UFS_TX/RX_D0_N/P
UFS_TX/RX_D1_N/P
POP LPDDR4xSEC 6GB
UFS_RESET
UFS_REFCLK
CAM PMICS2MPB02X01‐6030SUB_PMIC_I2C_1P8
SUB_PMIC_IRQPROXY_LED_EN
FLASH_LED_EN, FLASH_LED_TORCH
FrontCAM
IrisCAM
VTCAM_MIPI_D0/D1_P/N
VTCAM_RST_N, VTCAM_MCLK
VTCAM_I2C_1P8,VTCAM_AF_12C_1P8
IRIS_MIPI_D0/D1_P/N
IRIS_RST_N, IRIS_MCLK_CON
IRIS_I2C_1P8
Front/IrisConn.
Display PMICS2DOS05X01
DISP_I2C_1P8EL_ON1
Display
AUDIO
CAMERA
UB/TSP
DISP_RST_NDISP_TE
DDI_SPI_CS_N, DDI_SPI_CLKDDI_SPI_MISO, DDI_SPI_MOSI
TSP_INTTSP_TA
TSP_I2C_1P8
EL_ON2
PLCD_MIPI_D0/1/2/3_P/N
PLCD_MIPI_CLK_P/N
*AP subPMIC
TSP_ICID
OLED_ID
Finger PrintSensor
Disp
Conn.
BTP_SPI
BTP_IRQBTPConn.
6AXIS_SPI
6 axis sensor 6AXIS_INT
SENSOR_I2C_1P8Baro. SensorMagn. Sensor
NFC_HRM_I2C_1P8
HRM sensor HRM_INT
HALL_INT Cover_DET HALL IC
HALL_INT2
SIM_DET, T_FLASH_DET
T_FLASH_D0~D3, CLK
SIM2_RST, CLKSIM1_RST, CLK
SIM & SD cardSOCKET T_FLASH_CMD
Proxy SensorPROXY_I2C_1P8
PROXY_INT
SVC LED
SensorConn.
RGB_RRGB_GRGB_B
* AP PMIC
* AP PMIC
DualCAM
CAM/SUBCAM_MIPI_D0~D3_P/N
CAM_MCLK, RST_N
OIS_AF_I2C_1P8
CAM/SUBCAM_I2C_1P8
FROM_SPI_SSN, CLK, MISO, MOSI
Main
CamConn.
GPIOExpanderPCAL6524
GPIO_I2C_1P8EXPANDER_RSTN
HRM_BOOST_EN
BTP_ID
BTP_RST_N
BTP_LDO_ENWPC_EN
MST_PWR_EN
NFC_EN/NFC_FIRM
ESE_PWR_EN
SUB_CAM_RST_N
ExternalBUCK BOOST
SENSOR_LDO_EN * AP
* APPMIC 2nd HALL IC (Sub PBA)
CAM_OIS_RST_N
MEMORY
IF PMICMAX77705
* APPMICPM845
BATT Conn.
SBU1,2
CC1,2
JIG_ONB_CC
CBL_PWR_N
CHG_D
ET
AP_PS_HOLD
SUBPCB
Conn.
USB3.0_SS_RX/TX_0/1_M/P_AP
MUIC_D_N/P
USB_AP_D_N/P
AP_UART_T,RXD
IF_PMIC_I2C_1P8
VBAT_SENSE
MOTOR P/NMOTOR
POWER
SW_ON
VOL_UP
VOL_DN
INT_KEY Bixby
* AP subPMIC
AP_PMIC_SPMIDATA/CLK
PM_SLB
FAULT_N
PM8998_P
ON_O
UT
AUX SW AUX N/P
OVP LSCHG_INVBUS
SUB MICSUB_MIC_CLK/DATA
![Page 4: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/4.jpg)
ANT2003
ANT2005
ANT2
007
ANT2
008
ANT3
000
ANT3
001
ANT7
008
ANT7
009
ANT7
010
ANT7
011
ANT7
012
ANT7
013
ANT7
014
ANT8
004
ANT8
005
BOTHHOLE7000
BOTHHOLE7001
BOTHHOLE7002
BOTHHOLE7005
BOTHHOLE7006
BOTHHOLE7010
BOTHHOLE7011
BOTHHOLE7012
BOTHHOLE7014
C100
08
C100
09
C10010
C10012
C10013
C100
15
C10016
C10017
C100
18
C100
19
C1002
C10020
C100
21C1
0022
C10035C10036C10037
C10038
C1007
C100
9
C101
9
C1020
C1065 C106
6
C106
7
C106
8
C106
9
C1070
C1071
C1072
C1073
C1074
C107
5
C1076
C1077
C1078
C1081
C108
6
C1087 C108
8
C108
9
C109
4
C1109
C1114
C1141
C140
79
C140
80
C200
1C2
002
C2003 C2004
C2008
C2013
C2017
C2073
C207
4
C207
5
C2077
C2078
C2079
C2080
C2081
C208
2C2
083
C208
4
C208
5
C208
6
C2087C208
8
C2089
C209
0
C209
6
C209
7
C2098
C209
9
C210
0
C2101 C210
2
C210
3
C210
4C2
105
C210
6
C210
7
C2110
C211
1
C2114
C2115
C2119
C212
1
C2129
C2132
C2139
C2141
C214
3
C2146
C215
0
C2151
C2152
C254
2
C254
6
C254
8
C254
9
C255
1
C2553
C2554
C2665
C300
0
C3001
C300
2
C300
3
C300
4
C300
7
C301
4
C301
6
C301
7
C301
8
C301
9
C3020
C3021 C302
2
C3024
C3025
C302
6
C3027
C302
8
C302
9
C303
9C3
040
C304
1
C3042
C304
3
C304
4C3
045
C3046
C3047
C3048 C3049
C305
0
C3051
C305
5
C3056
C305
7
C305
8
C305
9
C4033
C4034
C4035
C4036
C403
7
C4039
C4040
C4044
C404
5
C4046
C404
8
C4051
C405
3
C4056
C4057
C4058
C405
9
C406
0
C406
1
C406
4
C4065
C4066 C4069C4071
C407
4
C4076 C4077
C4090
C4091
C409
2
C409
3
C409
4
C4095
C410
0
C5006
C6000
C6001
C6002
C600
3
C600
4
C6005
C6006
C6007
C6008C6009
C6010
C6011
C601
3
C6014
C601
5
C601
6
C601
7
C6018
C601
9
C6020
C602
2
C602
3
C602
4
C6025
C602
6
C6027
C602
8
C602
9
C603
0
C603
1
C6032
C603
3
C603
4
C603
8
C6039
C604
0
C604
1
C6042
C6043
C604
4
C604
5
C6046
C604
7
C604
8
C6049
C6050 C6051
C6052
C605
3C6054
C6055
C605
6
C6057
C605
8
C605
9
C6060
C6061
C606
2
C6063
C6064
C6065
C6066
C6068
C6072C6073
C6075
C6076 C6077
C6078
C607
9
C608
0
C6081
C6082
C6083
C7000
C700
1
C7002
C7003
C7004
C700
5
C7006
C700
7
C700
8
C700
9
C701
0 C7011
C7012C7013
C7014
C7015
C7016
C7017
C7018
C7019
C702
0
C7024
C702
9
C7030
C7042
C704
3
C704
4
C704
5
C704
6
C704
7
C704
8
C704
9
C705
0
C705
1
C705
2
C705
3
C7054
C705
5
C7056
C705
7
C705
8
C7059
C7060
C706
1
C7062
C706
3
C706
4
C706
5
C7066
C7067
C7068 C707
2
C707
3
C7076
C7077
C707
8C7
079
C7080
C7081
C7082
C7083
C708
7
C708
8
C709
7
C709
8
C710
1
C710
2
C7103
C710
4
C7105 C7107
C712
9
C713
0
C713
1
C713
2
C7133C7134
C713
5
C713
6
C7137
C7138
C7139C7140
C7141
C8022 C8023
C803
6
C8040
C8041
C804
2
C8046
C8051
C8052
C8054
C8060
C807
2
C8073
C807
5
C8076
C807
7
C808
8
C808
9
C809
0
C8091
C9000
C9001
C9002
C900
3
C9004
C900
5
C9006
C900
7
C9008
C900
9 C9010
C901
1
C901
2
C9013
C901
4
C9015
C9016
C901
7
C9018C9019
C9020
C902
1
C9022
C9023
C902
4
C9025
C9026
C902
7
C902
8
C902
9
C903
0
C903
1C9
032 C9
033
C903
4
C903
5
C903
6
C903
7
C9038
C903
9
C9040
C904
1
C9042C9
043
C9044
C9045
C9046
C9047
C9048
C9049
C9050
C9051
C906
0C9
061
C906
3
C9064
C906
5C9
066
C906
7
C906
8
C906
9
C907
0C9
071
C907
2
C907
3C9
076
C907
7
C907
8C9
079
C908
0C9
081
C908
2
C9083C9084 C9085
C9103
C910
4
C910
5
C9107
C9110
C912
0C9
121
CON5000
F1000
F200
7
F2008
F210
6
F3000
F3001
F3002
F300
3
GAS
7000
GAS
7001
HDC10000H
DC1
0001
HD
C300
0
HDC6000
HDC7000
HD
C900
0
HD
C900
1
L100
03
L100
04
L100
05
L1011
L101
3
L102
9
L1031
L103
2
L1033
L1034
L103
5L1
036
L103
7
L104
0
L1041
L1046
L1047
L1048
L1057L1059
L1084
L1104
L1105
L110
6
L2000
L200
1
L200
2
L2004
L2006
L200
8
L201
3
L2014
L201
7
L2018
L2029
L203
0
L203
1
L2032
L203
3
L2041
L2048
L2052
L2054
L205
6
L2057
L205
8
L205
9L2
060
L2061
L2065
L206
6
L206
7
L2068
L2071
L2072
L2517
L251
8
L252
0
L2521
L252
5
L300
0
L300
1
L300
3
L3005
L300
7
L300
8
L300
9
L301
0
L3011
L3012
L301
3
L3014
L301
5
L3018 L301
9
L302
0
L302
1
L302
2
L3023
L302
4
L3025
L302
6
L302
7
L302
8
L302
9
L3036
L3037
L303
8
L3039
L3041
L4004
L4005
L401
0
L4043 L4044
L7003L7004
L700
5
L7006
L700
7L7
008
L7009
L7010
L7011
L701
2
L701
3
L701
4
L701
5
L701
9
L702
1L7
022
L702
3L8
007
L8009
L801
0
L8011
L8017
L900
0
L900
1
L9002
L900
3
L9004
L900
5
L900
6
L9007
L9008
L900
9
L901
0
L901
3
L9014
L9015
L9016
LED
9000
MAA
NT1
0
MAA
NT1
1
MIC
8000
OSC7000
R1002
R1003
R100
5
R200
4R2005
R2006
R200
7
R300
3
R3004
R3005
R3006
R3007 R3008R3009
R3010
R3011
R301
2
R301
3
R301
4
R3015
R301
6
R301
7
R301
8R3
019
R302
0
R3021
R302
2R3
023
R3024
R302
5
R3027
R302
8
R3029
R3030
R303
3
R3034
R3038
R303
9
R4003
R400
6
R4030
R4040 R4041
R5008
R501
0
R5011
R501
3
R5018
R501
9
R502
0
R502
2
R502
3
R504
1
R504
2
R505
0
R5052R5053
R505
9
R6000R6001
R600
4
R7000
R7006
R700
9
R701
0
R701
1
R701
2
R701
3R7
014
R7022
R7027
R7040 R7041
R704
2
R800
7
R802
5
R9001
R900
2
R9003
R9004
R9005
R901
6
R901
7
R901
9
R902
0
R902
2
R902
4R9
025
R902
6
RFS1000
RFS1001RFS1002
RFS2000
RFS2001
SC30
02SC
3003
SC30
06
SC30
09
SUS3001
SUS3002
SUS3
003
TA7000
TH30
00
TH7001
TP_AXIS_INT
TP_SLIMBUS_DATA8000
TP_SLIMBUS_DATA8001
TP_UB
TP_UB6001
TP2002
TP2003
TP2004
TP2005
TP2007
TP3001
TP3003
TP3004
TP3005
TP3006
TP3007
TP3008
TP3009
TP3010
TP3011
TP3012 TP3013
TP3014
TP3015
TP3019 TP3020
TP4011
TP4012
TP4013
TP4014
TP4051
TP4052
TP4053 TP4054 TP4056
TP4057
TP4060
TP4061
TP5000
TP5001
TP7000
TP7001
TP7002
TP7003
TP7005
TP7007
TP8000 TP8001TP8002 TP8003
TP8004
TP9000TP9001
TP9002
U10003
U1090
U11015
U11033 U11034
U11035
U20
89
U20
91
U2099
U2101
U25
03
U25
04
U2505
U25
06
U25
07
U25
08
U25
09
U25
10
U2513
U30
00
U3004
U3003U3005
U4004
U40
05
U4006U4008
U4009
U40
10
U40
13
U7002
U7004
U8004
U90
00
U9002
U9003
V2000
V2001
V2002
V2008
V3000
V300
1
V300
3
V3004
V7000
V700
6
V700
7
V7011
V7014
V7021
V7025
VR30
02
VR30
04
ZD10
00ZD
1001
ZD10
012
ZD10
013
ZD10014ZD10015ZD10016
ZD10017
ZD10018
ZD10019
ZD30
15ZD
3016
ZD30
17
ZD3018 ZD3019
ZD30
20
ZD30
22
ZD7002
ZD7003
ZD8000 ZD8001
ZD8002ZD8003
ZD9000
ZD9001
ZD90
04
ZD9005
ZD90
06
ZD9007
ZD9013
ZD90
14
ZD90
15
ZD9019
![Page 5: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/5.jpg)
ANT2
006
ANT2
009
ANT2
011
ANT2
012
ANT3
002
ANT7000
ANT7001
ANT7002
ANT7003
ANT7004
ANT7005
ANT7006
ANT7007
ANT7015
ANT7
019
ANT7020
ANT7021
ANT8002 ANT8003
C100
0
C10000
C100
01
C10002
C10003
C10004
C100
05
C100
06
C10007
C100
1
C10014C100
24
C100
25
C100
26
C100
27
C100
28
C100
29
C100
30
C100
31
C100
32
C10033
C100
34
C100
5C1
006
C1010
C101
3
C101
7
C1090C1091C1092
C1093
C109
5
C109
6
C109
7C1
098
C1099
C110
0
C1101
C1102
C1103
C110
4
C1105C110
6
C110
7
C1108C1111C1112
C111
3
C111
6
C1119
C112
0
C1123
C1125
C1126
C1127
C1129
C1130
C113
1C1132
C1133
C1134
C1136
C1137
C113
9
C1140
C121
5
C122
0C1
223
C1227
C1320
C140
59
C14060
C200
0
C200
5
C2018
C2092
C209
3
C2094
C2095
C212
3
C2124
C212
8
C2136
C2137
C2138
C2140
C2144
C214
5
C2556
C2557
C256
4
C2664
C300
5
C3006
C3008
C3009
C3010
C301
1
C3012
C3013
C4014
C401
5
C4016
C4017
C401
9
C403
1
C404
7
C404
9C4
050
C500
0
C500
1
C500
3 C5004
C5005
C6012
C6021
C603
5C6
036
C603
7
C6067
C606
9
C6070
C6071
C6074
C7021
C7022
C7023
C7025
C7026
C7027
C7028
C703
1
C703
2
C7074
C707
5
C7084
C708
5
C7086
C7089
C709
1
C7092
C709
3
C709
4
C7095
C7096
C710
6
C710
8
C710
9
C711
0
C7111
C7112
C7113 C7114 C7115
C7116
C711
7
C7118
C7119
C712
0
C7121
C7122
C7123
C7124
C7125
C7126
C7127
C712
8
C7146
C714
7
C714
8
C714
9
C715
3
C715
4
C7155
C7156
C715
7
C715
8
C715
9
C7160C7161
C7162
C7164
C7165
C7166
C716
7
C7168
C7169
C7173
C8000
C8001
C8002
C800
3
C8004
C8005
C800
6
C800
7
C800
8
C8009
C801
0C8011
C801
2
C8013
C801
4
C8015
C8016
C8017
C801
8
C801
9
C8020
C8021
C802
4
C8025
C8026 C8027
C802
8
C8029
C8030
C803
1
C8032
C803
3
C8034
C803
5
C803
7
C803
8C8039
C804
3
C804
4
C8045
C804
7
C804
8
C8049
C8050
C805
3
C8055C8056
C8057
C8058
C805
9
C806
1
C8064
C8065
C806
6
C8067
C8068
C8069
C8070
C808
3
C808
6
C808
7
C9052
C9086
C9087
C9088
C908
9
C9090
C909
1
C909
2
C909
3
C909
4
C909
5
C909
6
C909
7
C909
8
C909
9C9
100
C910
1
C9106
C910
8
C910
9
CODEC_SPI_CLK
CODEC_SPI_CSN
CODEC_SPI_DIN
CODEC_SPI_DOUT
CON5001
D4000 D7002
DEBUG_CLK
DEBUG_IO
F1005
F1006
F1105
F1501
F200
0
F2006
F2502
HDC8000
JTAG
6000
JTAG
6001
JTAG
6002
JTAG
6003
L100
0
L10000
L10001
L100
02 L10006
L10007
L100
08
L10009
L1001
L10010
L1004
L100
5
L1012
L1018
L103
0
L105
8L1
060
L1062
L106
3
L106
4
L1066
L106
7
L1070
L1071
L1072
L1073
L107
4
L1077
L107
8 L107
9L108
0
L1082
L109
4
L1096
L1098 L1099
L1100 L1101
L110
2
L110
3
L1266
L127
0
L129
0
L129
4L1
296
L139
4
L1567
L2015
L202
2
L202
3L2
024
L202
5
L2026
L202
7
L2028
L2034
L2037
L206
2
L206
3
L2064
L2523
L2524
L3016
L3017
L3030
L4001
L400
8
L400
9
L7000
L700
1
L7002
L7016
L7017
L701
8
L702
0
L7027
L800
0
L8001L8002
L800
3
L800
4
L8005
L8006
L800
8
L801
2
L8013
L801
4
L801
5
L801
6
L8018L8019
L8020L8021
L802
7
L802
8
L8029
Q40
00
R100
0
R10000
R10001
R100
05R1
0006
R100
1
R1004
R1006R1007
R1013
R200
8
R200
9
R300
0
R300
1
R300
2
R400
7
R400
8
R401
4
R4015
R401
9
R402
0
R4034R403
5
R403
6
R5000R5001
R5002
R5003
R5004
R5005
R5006
R5007
R500
9R5
012
R501
4
R5015
R5016
R5017
R5021
R5024
R5025
R502
6
R502
7R5028
R5029
R5030
R5031
R5032
R5033
R5034
R5035
R5036
R5037
R5038
R5039 R5040
R504
5
R5046
R5047
R5048
R5049
R505
1
R5054
R5055
R5056R5057R5058
R7001
R700
3
R7004
R7016 R7017
R7018
R7019
R702
0
R7021
R7023
R7024R7025
R703
0
R7032
R7033
R7034
R703
5
R7036
R703
7
R703
9R7
043
R704
4
R7045
R704
9
R7050 R7051
R7052
R705
3
R800
3
R8005
R8006
R800
9
R801
0
R801
1
R801
2
R8018R8019
R8020
R802
1
R8022
R802
7
R802
8
R8029
R8030
R803
2
R803
3
R803
4
R803
5
R803
6
R803
7
R803
8
R803
9
R804
1
R8086
R808
9
R809
0
R809
1
R809
2
R9000
R9006
R900
7
R900
8
R901
5
R9018
SC30
00SC
3001
SC3004
SC30
07
SC3010
SIM
3000
SUS3000
TA70
01
TA7002
TA7003
TH1000
TH5000
TH70
00
TP_CODEC_INT
TP_CODEC_RESET_N
TP_FM_SLEEP_CLK
TP_PS_HOLD
TP_SSC_DEBUG_RXD
TP_SSC_DEBUG_TXD
TP_VOICE_INT
TP1000TP1001
TP1002TP1003
TP2000TP2001
TP2006
TP3000
TP3016
TP4015
TP4047
TP4048 TP4049
TP4050
TP5002
TP5003
TP5004
TP5005
TP5006
TP5007TP5008
TP5009
TP5010
TP5011
TP5012
TP6000
TP6001
TP6003
TP6005TP6006
TP6007
TP6008
TP6009
TP6010
TP6011TP6012
TP6013
TP7004
TP7006
TP7010
TP7011
TP7012
TP7015
TP7016TP7017
TP9003
TR70
00
U10
04
U10
05
U1094
U10
95U
1101
7
U11018
U11
019
U11
020
U11
021
U11022
U11036
U11037
U11038
U13
01
U13
02
U2097
U21
00
U2514
U2516
U25
17
U2518
U25
19U2520
U2619
U2620
U4001
U4003
U4011
U5000 U7000
U7001
U7003
U70
05
U70
06
U8000
U8001
U80
03
U9001
U90
04
U9007
UCP
500
UME6000
V2007
V2011
V201
3
V7023
V702
4
V702
6
V702
7
VR30
00
VR30
03
ZD10
000
ZD10
001
ZD10
002
ZD10
003
ZD10
004
ZD10
005
ZD10
006
ZD10
007
ZD10
008
ZD10
009
ZD10
010
ZD10
011
ZD10020
ZD10
021
ZD30
00
ZD30
01
ZD30
02
ZD3003
ZD30
04
ZD30
05
ZD3006
ZD30
07
ZD3008
ZD3009
ZD30
10
ZD30
11
ZD30
12
ZD30
13
ZD30
14
ZD30
21
ZD4000
ZD70
00 ZD70
01
ZD70
04
ZD70
05
ZD70
06
ZD80
04
ZD80
05 ZD80
06
ZD80
07
ZD8008
ZD8009 ZD8010
ZD8011
ZD8012 ZD8013ZD8014
ZD8015
ZD8016
ZD80
17
ZD80
18
ZD8021ZD8022
ZD90
08
![Page 6: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/6.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-3. Flow chart of Troubleshooting.
Oscilloscope Digital Multimeter
Power Supply + driver, ESD Safe Tweezer
8960 & Spectrum Analyzer Soldering iron
![Page 7: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/7.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-1. Power on
Power-on the phone and check the power-on
sound or motor Vibration.
END
check the initial operation (8-4-3)
YES
YES
Check the signal of AP_PS_HOLD = 1.8V
#1 Check the TP7003 is High. #2 Check the output voltage of U7002
- L7007 =2.04V, L7009 = 1.025V - L7008 = 0.8V, L7003 = 0.8V,- L7010 = 0.75V, L7005 = 1.35V - L7006 = 1.8V, L7004 = 1.1V, - L7015 = 0.75V
#3 Check the TP5003 is High
※ Each voltage level has ±10% margin → Change the U7002 If the voltage level is abnormal,
#4 Check the Clock OSC7000. Frequency is 38.4MHz
※ Test condition (Oscilloscope setting)
: 20.0us.div (time division) Replace the OSC7000.
NO
YES
When pressing Power key, check if the Power key FPCB pad on front
is shorted
Replace the POWER KEY FPCB NO
YES
YES
Mobile phone does not power on
Check the Battery Voltage level.
Is it more than 3.5V?
Charging the battery by TA. If its voltage level is extremely low (under 2.5V), Charge current is only 50mA.
It will take more time to meet booting voltage
NO
YES
Change the FRONT-LCD ASSY NO
![Page 8: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/8.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-2. Motor
Yes
No Resolder or Reconnect ANT7006, ANT7007
Yes
END
Yes
Check (crack,open,etc)L7017, L7020
No Resolder or Replace L7017, L7020
Yes
No Resolder or Replace U7001
Yes
Replace Motor
Check the Clip (ANT7006 and ANT7007)
Check the C7074 = 5.2V
Motor does not work
![Page 9: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/9.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-3. initial
Re-download Software
Re check “8-4-1 Power on”
Trouble shooting process Check the UCP500 (Crack etc )
NO
Change UME6000.
Do not use Blank MEMORY
Change PBA
Normal
YES
Initial Failure
Normal
END
![Page 10: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/10.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-4. SIM PART
Check the SIM card
Check the
ZD3005, ZD3004,
ZD3002
END
Change : SIM Card Abnormal
SIM Card does not work
Check the NFC IC (U11035)
Check the PMIC (U7002)
Check the SIM/SD Socket, PMIC (U7002), AP(UCP500)
NO
YES
Normal
Abnormal
Abnormal
Check the
VDD_NFC_SIM1=1.8V or 3.0V
VREG_L9A_1P8_3P0=1.8V or 3.0V
![Page 11: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/11.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-5. SIM/SD PART
Check the SD card
SD Socket
Check the VDD T Flash
VREG_L21A_2P95=C3005
= 2.95V
Check the ZD3000, ZD3014,
ZD3013, ZD3012, ZD3011,
ZD3010
END
Change : SD Card or Replace : SD Socket Abnormal
SD Card does not work
Check the SD Socket, AP (UCP500)
NO
YES
Normal
Abnormal
Check the PMIC (U7002) Abnormal
![Page 12: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/12.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-6. OTG
Check the Voltage of BUCK OUT (L7002)=5V
Check the IF Socket & SUB PCB connector
Check the OVP (U4001)
Abnormal
OTG does not work
YES
END
Normal
Check the OTG ICON Abnormal
YES
Check the IF PMIC (U7006)
![Page 13: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/13.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-7. Hall IC
Check the voltage C4033, L4004 =1.8V
Check the voltage C10092 =1.8V
No
Replace U4004
Yes
Yes
END
Hall Sensor of main PBA does not work
Yes
No Replace U7002
Hall Sensor of Sub PBA does not work
Yes
Yes
END
Check the HDC8000 Connection
No 1. Reconnect HDC8000 2. Replace SUB PBA
Check the voltage C1003 of Sub PBA =1.8V
Yes
No 1. Reconnect HDC8000
2. Replace SUB PBA
Check the voltage without Magnet C4034 =1.8V with Magnet C4034 =0V
![Page 14: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/14.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-8. 6Axis sensor
6Axis Sensor does not work
Yes
No
Yes
Yes
END
Check U4005’s package, smd status (crack, open, short, etc.)
Check 6Axis MOSI, CLK, NSS, MISO pin
No
Yes
Replace U4005
Check the voltage C4035, C4036 =1.8V
No Replace U9003
Replace U4005 (If there is still out of order, replace UCP500)
![Page 15: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/15.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-9. Magnetic sensor
Magnetic Sensor does not work
Yes
Yes
No
Yes
END
Check U4010’s package, smd status (crack, open, short, etc.) Replace U4010
Check the voltage C4045 =1.8V
No Replace U9003
Check R5008, R5011 (I2C is OK?)
No
Yes
Replace U4010 (If there is still out of order, replace UCP500)
![Page 16: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/16.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-10. Barometer sensor
Barometer Sensor does not work
Yes
No
Check the voltage C4046 =1.8V
Yes
No Replace U9003
Check U4008’s package, smd status (crack, open, short, etc.)
Replace U4008 (If there is still problem, replace UCP500)
Check R5008, R5011 (I2C is OK?)
No
Yes
Replace U4008
END
Yes
![Page 17: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/17.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-11. Proximity + RGB sensor
Proximity + RGB Light Sensor does not work
Proximity + RGB Light Sensor does not work
Yes
Yes
Check the voltage L3027, C3050 =3.3V
(Sensor’s LED voltage)
No
Replace U9002
Check the voltage L3026, C3044, 3045 =1.8V
(Sensor’s IO voltage)
Yes
No Replace U9003
Check R5052, R5053 (I2C is OK?)
No
Yes
Replace UCP500
Yes
END
Check connection HDC3000 No
Reconnect HDC3000
Check sensor FPCB (crack, damaged, etc.)
Abnormal
Yes
Replace Sensor FPCB
![Page 18: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/18.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-12. HRM sensor
HRM Sensor does not work
Yes
Yes
END
Check the voltage C4059, C4060 =5.25V (Sensor’s LED voltage)
No
Replace U4006
Check the voltage C4056, C4057 =1.8V
(Sensor’s ASIC voltage)
Yes
No Replace U7002
Check R5002, R5004 (I2C is OK?)
No
Yes
Replace U4013
![Page 19: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/19.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-13. Display
LCD is still off after PWR ON
Yes
No Reconnect the HDC9000
Yes
END
Yes
Check VDD_DDI_3P0=3.0V (C9083) VDD_DDI_1P8=1.8V (C9085 )
VDD_DDR_1P6=1.6V(C9036,C9021)
No Resolder or Replace the PMIC (U9000)
Yes
Check ELVDD 4P6=4.6V (C9009,C9010)
ELVSS_-4P4 = -1.4 ~ -5.4V (C9011,C9012) ELAVDD_7P6 = 5.8 ~ 7.9V (C9013)
No Resolder or Replace the PMIC (U9000)
Yes
Resolder or Replace UCP500
Check the connection of HDC9000
![Page 20: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/20.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-14. TSP
Touch Screen does not work
Yes
No Reconnect the HDC9000
Yes
END
Yes
Check VDD_TSP_1.8V (C9084, C9064) VDD_TSP_3.0V (C9025, C9063)
No Resolder or Replace U9000
Yes
Replace the UB
Check TSP Connector on MAIN PBA
![Page 21: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/21.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-15. VT CAMERA
“Camera” function does not work
Yes
No
Reconnect the HDC10000
Yes
END
Yes
Check the voltage C10008 : 2.8V
C10012 : 1.05V C10009 : 1.8V
C10010,C10013 : 2.8V
No Resolder or Replace U9002
Yes
No Replace the PBA
Yes
Replace the camera module
Check the Camera connector on Main PBA
Check the VTCAM_MCLK is 24Mhz (C10014)
![Page 22: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/22.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-16. 12M CAMERA
“Camera” function does not work
Yes
No
Reconnect the U11038
Yes
END
Yes
Check the voltage C10033 C10000 : 1.1V, C10026, C10034 : 1.0V
C10025 : 1.1V , C10002 : 3.2V C10003 C10004 : 2.8V ,
C10027 : 1.8V
No Resolder or Replace U9002
Yes
No Replace the PBA
Yes
Replace the camera module
Check the Camera connector on Main PBA
Check the CAM_MCLK is 24Mhz (C10024)
![Page 23: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/23.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-17. IRIS CAMERA
“Camera” function does not work
Yes
No
Reconnect the HDC10001
Yes
END
Yes
No Resolder or Replace U9002
Yes
No Replace the PBA
Yes
Replace the camera module
Check the Camera module Connection
Check the IRIS_MCLK is 24 Mhz (C10007)
Yes
No Resolder or Replace U7002
Check the voltage C10016 : 1.05V , C10017 : 1.8V
Check the voltage C10015 : 2.8V
Yes
No Reconnect or Replace the Sensor FPCB
Check the Sensor FPCB Connection
![Page 24: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/24.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-18. Finger Print
Finger Print Sensor does not work
Yes
Yes
Check the voltage C9106 = 3.0V C9108 = 1.8V
No
Check U9007 or U5000
Check the Sensor FPCB Connection
Yes
No Reconnect or Replace the Sensor FPCB
Check U9007 C9109 = 3.2V over
No
Yes
Replace U7004
Yes
END
Abnormal Replace Sensor FPCB
No
Normal
Replace the Sensor FPCB or Replace UCP500
Check sensor FPCB (crack, damaged, etc.)
Check ZD9013,ZD9005 C9082,C9110 (SPI is OK?)
![Page 25: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/25.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-19-1. Main MIC
Check sub board
Connection (HDC8000)
Check the signal of
C8055 = 1.8V
R8010 = 2.4MHz
END
Set the HDC8000 connection NO
Check main microphone function In voice call Handset mode
or voice recorder mode
Resolder or replace the U8001 (Codec IC)
YES
YES
NO
YES
Replace the Sub board
![Page 26: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/26.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-19-2. Sub(2nd) MIC
Check the signal of
C8056, C8022, C8091=
1.8V
R8011 = 2.4MHz
Check sub(2nd) microphone function In voice call LoudSPK mode
or camcording mode
Resolder or replace the U8001(Codec IC)
YES
YES
NO
END
YES
Resolder or replace the MIC8000
![Page 27: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/27.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-20. Speaker part
Check the contact
C-clips(pins) of
ANT8004, ANT8005
Check the signals of
L8007, L8010
Resolder or replace the ANT8004, ANT8005 NO
Check the speaker function, Play MP3 with maximum volume level
Resolder or replace the L8007, L8010
YES
YES
NO
Check the signal of
C8033, C8035 = 10V Resolder or replace the U8000 (SPK amp)
YES
NO
END
YES
Replace the SPK module
![Page 28: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/28.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-21. Receiver part
Check the signals of
C8073, C8075 = 10V?
Check the Receiver function, In voice call Handset mode
Check the contact
C-clips(pins) of
ANT8002, ANT8003 Resolder or replace the ANT8002, ANT8003
NO
YES
Resolder or replace the U8004 (RCV amp)
NO
YES
END
YES
Replace the RCV module
Check the signals of
L8009, L8011 Resolder or replace the L8009, L8011 NO
YES
![Page 29: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/29.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-22. BT/WIFI
Yes
No Resolder or change the
ANT3000,ANT3001,ANT3002
Yes
No Resolder or Replace of C3020,C3026,C3055,C3056,C3058, L3019,L3025,L3036,L3041,V3000
V3001,V3004
Yes
Resolder or change U3003
Check the Voltage on C3022 = 1.8V
BT/WIFI is not working
Yes
No Enable BT or WIFI function.
Yes
END
Yes
No Check the U7002
(Crack, open, damaged, etc)
Yes
No Resolder or change R3004
Check BT or WIFI fuction ON
Check the Voltage on R3004=
3.7~4.3V(VBAT)
Check the Status of C3020,C3026,C3055,C3056,C3058,L3019,L3025,L3036,L3041,V3000,
V3001,V3004
Check the status of ANT3000,ANT3001,ANT3002
![Page 30: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/30.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-23. GPS
well.Check(crack,open,etc) C2008, C2001,L2057,
F2007,C2013, L2017, L2058, L2060, L2018,L2061,U2101, F2008
GPS is not working
Yes
No Enable GPS Function in the setting.
Yes
END
Yes
No 1. Resolder or Replace ANT2012, ANT2009
2. Replace REAR
Yes
No Resolder or change the wrong element
(open, crack, deviation, etc)
Yes
No Check OSC7000(short, open, crack, etc.)
Yes
No
Resolder or change U2099
Check GPS function ON
Check AP PMIC(U7002)(short, open, crack, etc.)
Yes
Check 38.4MHz Clock at output of OSC7000
Connected Check the Antenna connect
Check the voltage on L2056=1.8V
![Page 31: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/31.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-24. FM Radio
Check the Earjack FPCB work
FM Radio is not working
Yes
No Enable FM Radio Function in the setting.
Yes
END
Yes
No Connect the earphone into the phone.
Yes
No Replace the Earjack FPCB
Yes
No Replace the Sub PBA.
Yes
No
Resolder or change U4011
Check FM Radio function ON
Resolder or change the wrong element(open, crack, deviation, etc)
Yes
Check the Earphone
Check the Sub PBA work well.
Check C4047, L4008
Yes
No Check AP PMIC(U7002)(short, open, crack, etc.)
Yes
Check the voltage on C4049=1.8V C4050=2.8V
Check Reference Clock at TP_FM_SLEEP_CLK.
![Page 32: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/32.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-25. NFC
NFC is not working
Yes
No Enable NFC Function
Yes
END
Yes
Check the NFC FPCB Antenna No
Replace NFC Antenna
Yes
Check L4043, L4044, C4076, C4077, C4066, C4069, C4071, R4040, R4041, C4064, C4074, C4092
(crack, open, damaged, etc.)
No
Yes
Resolder or Replace U11035
Check NFC function ON
Check the Antenna connect ANT7008, ANT7011
Check the voltage on C4053 = 1.8V
Check reference clock at TP4061
Resolder or Replace ANT7008, ANT7011
Check AP PMIC(U7002)(short, open, crack, etc.)
Yes
Yes
No
No Resolder or change the wrong element(open, crack, deviation, etc)
![Page 33: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/33.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-26. MST
MST is not working
Yes
No
Replace MST Antenna
END
Yes
Check the Antenna contact ANT7009, ANT7013
No
Resolder or Replace ANT7009, ANT7013
Yes
Check the battery level Battery >= 5%
No
Charging the Battery
Yes
Check voltage at C7125 Check signal at ANT7013
(*#0*# -> MST test -> turn on continous)
No Resolder or Replace U7004, U7013
Yes
Check MST FPCB Antenna
![Page 34: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/34.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-27-1. Charging Part Wire Charging (Normal/Fast)
Charging Sequence
Start C4014 = 5V or 9V
Battery is Charging?
END
Resolder or Replace U7006 NO
Reconnect TA or USB
or Check sub PBA
NO
TA / USB Insert
Check the voltage
C7023 = 5V or 9V
NO Resolder or Replace U4001
YES
YES
![Page 35: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/35.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-27-2. Charging Part Wirless Charging (Normal/Fast)
Contact Wireless charger
Charging Sequence
Start C7173 = 5V or 10V
NO Resolder or Replace U7005
YES
Check again about
charging status
NO Resolder or Replace U7006
YES
END
![Page 36: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/36.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & C2087=1.2V &
C2081,C2086= 1.8V
8-4-28. GSM 850/900, CDMA BC0, WCDMA B5/8, LTE B5/8/12/13/17/18/19/20/26/28/71 RX
Receiver is OK? Resolder or change UCP500
No
Yes
Yes
Resolder or change U2099
No
END
No
No
Yes
Yes
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA No
Check L1033 ≤-65dBm
Yes
Resolder or change RFS1001, C1073, L1034, C1071
No
Check L1041 ≤-65dBm
Yes
Resolder or change F1000, C1075
No
Check component soldering status ok?
U1090, C1074 Resolder or change
U1090, C1074
No
Yes
Check C1074 ≤-65dBm Resolder or change C1074, U1090
![Page 37: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/37.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & 2087=1.2V & C2081,C2086= 1.8V
NORMAL CONDITION Catch the channel?
8-4-29. GSM 1800/1900, WCDMA B1/2/4, TDSCDMA B34/39, LTE B1/2/3/4/25/39/66 RX
Yes
No
Resolder or change U2099
No
Check C1109 ≤-65dBm Resolder or change U1095, C1109
No
Yes
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA No
Check L1033 ≤-65dBm
Yes
Resolder or change RFS1001, C1073, L1034, C1071
No
Check L1031 ≤-65dBm
Yes
Resolder or change F1000, L1029
No
Check component soldering status ok?
U1095, C1109 Resolder or change
U1095, C1109
No
Receiver is OK? Resolder or change UCP500
No
Yes
Yes
Yes
END
![Page 38: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/38.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & 2087=1.2V & C2081,C2086= 1.8V
NORMAL CONDITION Catch the channel?
8-4-30. LTE B7/38/40/41 RX
No
Yes
Check RFS 1000 ≤ -65dBm Check the ANT, Sub PBA No
Check C1088 ≤-65dBm
Yes
Resolder or change RFS1000, C1086, L1057
No
Check component soldering status ok?
U1095, C1102
No
Check L1296 ≤-65dBm
Check C1102 ≤-65dBm Resolder or change U1095, C1102
No
Resolder or change U1095, C1102
Resolder or change F1105, C1223
Yes
Yes
No
No
Receiver is OK? Resolder or change UCP500
No
Yes
Yes
Yes
Resolder or change U2099
END
![Page 39: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/39.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & 2087=1.2V & C2081, C2086= 1.8V
8-4-31. LTE B34 RX
No
Yes
Yes
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA No
Check L1033 ≤-65dBm
Yes
Resolder or change RFS1001, C1073, L1034, C1071
No
Check L1031 ≤-65dBm
Yes
Resolder or change F1000, L1029
No
Check component soldering status ok?
U1095, L1073 Resolder or change
U1095, C1099
No
No
Receiver is OK? Resolder or change
UCP500 No
Yes
Yes
Resolder or change U2099
No
END
Check C1100 ≤-65dBm Resolder or change
U1084, C1100
Check C1109 ≤-65dBm
Yes
No Resolder or change
C1109
![Page 40: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/40.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-32. CDMA BC0, GSM 850/900, WCDMA B5/8, LTE B5/8/12/13/17/18/19/20/26/28 DRX
Check soldering status(U2099) and the voltage at C2077, C2104 =1.0V & 2087=1.2V & C2081, C2086= 1.8V
END
Resolder or change ANT2006, ANT2007, ANT2008,
V2007
Resolder or change F2000, C2094
Resolder or change F2000, C2094
Resolder or change U2099
Resolder or change UCP500
No
No
No
No
No
No
NO
NO
Yes
Yes
Yes
Yes
Yes
Yes
Receiver is O.K?
Resolder or change C2119, U2091
No
Yes
Yes
NORMAL CONDITION Catch the channel?
Check V2007 ≤ -65dBm ?
Check L2024 ≤ -65dBm ?
Check component soldering status ok?
F2000, C2094
Check C2094 ≤ -65dBm ?
Check component soldering status OK at U2091, C2119 ?
Check C2119 ≤ -65dBm ?
Resolder or change L2022, C2093, L2023
Resolder or change U2091, C2119
![Page 41: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/41.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-33. GSM1800/1900, WCDMA B1/2/4, LTE B1/2/3/4/25/66 DRX
Check L2057 ≤ -65dBm ?
Check L2015 ≤ -65dBm ?
Check component soldering status OK at U2100, C2139 ?
END
Resolder or change ANT2012, C2008, C2001
Resolder or change F2007, L2059
Resolder or change U2100, C2139
Resolder or change C2139, U2100
Resolder or change U2099
Resolder or change UCP500
No
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Receiver is O.K?
Check C2139 ≤ -65dBm ?
Check soldering status(U2099) and the voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V
No
NORMAL CONDITION catch the channel?
![Page 42: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/42.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-3-34. LTE 38/41 DRX
Check L2057≤ -65dBm ?
Check L2015≤ -65dBm ?
Check component soldering status OK at U2100, C2144 ?
Resolder or change ANT2012, C2008, C2001
Resolder or change F2007, L2059
Resolder or change U2100, C2144
Resolder or change C2144, U2100
Resolder or change F2006, C2145
Resolder or change C2145, F2006
No
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Check C2145 ≤ -65dBm ?
Check C2144 ≤ -65dBm ?
Check component soldering status OK at F2006, C2145 ?
No
Resolder or change C2139
No Check C2139 ≤ -65dBm ?
Check soldering status(U2099) and the voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V
No Resolder or change U2099
Receiver is O.K? No Resolder or change
U2099
END
Yes
Yes
Yes
NORMAL CONDITION catch the channel?
![Page 43: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/43.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-3-35. LTE B34 DRX
NORMAL CONDITION Catch the channel?
Check L2057≤ -65dBm ?
Check L2015≤ -65dBm ?
Check component soldering status OK at U2100, C2664 ?
Resolder or change ANT2012, C2008, C2001
Resolder or change F2007, L2059
Resolder or change U2100, C2664
Resolder or change C2664, U2100
Resolder or change U2518, C2557
Resolder or change U2518, C2557
No
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Check C2557 ≤ -65dBm ?
Check C2664 ≤ -65dBm ?
Check component soldering status OK at U2518, C2557 ?
No
Resolder or change C2139
No Check C2139 ≤ -65dBm ?
Check soldering status(U2099) and the voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V
No Resolder or change U2099
Receiver is O.K? No Resolder or change
U2099
END
Yes
Yes
Yes
![Page 44: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/44.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-3-36. LTE B39 DRX
Check L2057≤ -65dBm ?
Check L2015≤ -65dBm ?
Check component soldering status OK at U2100, C2664 ?
Resolder or change ANT2012, C2008, C2001
Resolder or change F2007, L2059
Resolder or change U2100, C2664
Resolder or change C2664, U2100
Resolder or change U2518, C2557
Resolder or change U2518, C2564
No
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Check C2564 ≤ -65dBm ?
Check C2664 ≤ -65dBm ?
Check component soldering status OK at U2518, C2557 ?
No
Resolder or change C2139
No Check C2139 ≤ -65dBm ?
Check soldering status(U2099) and the voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V
No Resolder or change U2099
Receiver is O.K? No Resolder or change
U2099
END
Yes
Yes
Yes
NORMAL CONDITION Catch the channel?
![Page 45: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/45.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & C2087=1.2V &
C2081, C2086=1.8V
8-4-37. GSM 850/900 TX
Yes
No
No
Check RFS 1001 about ≥ 23dBm?
Check the ANT, Sub PBA Yes
Check L1033 ≥ 23dBm
No
Resolder or change RFS1001, C1073, L1034, C1071
Yes
Check L1041 ≥ 23dBm
No
Resolder or change F1000, C1075
Yes
Check component soldering status ok?
U1004, C1137 Resolder or change
U1004, C1137 No
Receiver is OK? Resolder or change
UCP500 No
Yes
Yes
Resolder or change U2099
No
END
![Page 46: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/46.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & C2087=1.2V &
C2081, C2086=1.8V
8-4-38. GSM 1800/1900 TX
Yes
No
No
Check RFS 1001 about ≥ 23dBm?
Check the ANT, Sub PBA Yes
Check L1033 ≥ 23dBm
No
Resolder or change RFS1001, C1073, L1034, C1071
Yes
Check L1041 ≥ 23dBm
No
Resolder or change F1000, C1075
Yes
Check component soldering status ok?
U1004, C1134 Resolder or change
U1004, C1134 No
Receiver is OK? Resolder or change
UCP500 No
Yes
Yes
Resolder or change U2099
No
END
![Page 47: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/47.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077, C2104 =1.0V & C2087=1.2V &
C2081, C2086=1.8V
8-4-39. CDMA BC0, WCDMA B5/8, LTE5/8/12/13/17/18/19/20/26/28 TX
Yes
Check L1033 ≥ 23dBm No
Resolder or change RFS1001, C1073, L1034, C1071
Yes
No
Check RFS 1001 about ≥ 23dBm?
Check the ANT, Sub PBA No
Check component soldering status ok?
U1090, C1070 Resolder or change
U1090, C1070
No
Yes
Receiver is OK? Resolder or change UCP500
No
Yes
Yes
Resolder or change U2099
No
END
![Page 48: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/48.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077,C2104 =1.0V & C2087=1.2V &
C2081, C2086=1.8V
8-4-40. TDSCDMA B34/39, WCDMA B1/2/4, LTE B1/2/3/4/25/34/39/66 TX
No
Check RFS 1001 ≥23dBm?
Check the ANT, Sub PBA
Check L1033 ≥ 23dBm No
Resolder or change RFS1001, C1073, L1034, C1071
Yes
Check component soldering status ok?
U1095, C1089, L1058 Resolder or change
U1095, C1089, L1058
No
Yes
Check L1058 ≥ 23dBm
Yes
Resolder or change U1095, C1089, L1058
No
No
Yes
No
Receiver is OK? Resolder or change UCP500
No
Yes
Yes
Resolder or change U2099
No
END
![Page 49: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/49.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NORMAL CONDITION Catch the channel?
Check soldering status(U2099) and the
voltage at C2077,C2104 =1.0V & C2087=1.2V &
C2081, C2086=1.8V
8-4-41. LTE B7/38/40/41 TX
No
Yes
Check RFS 1000 ≥23dBm?
Check the ANT, Sub PBA No
Check C1088 ≥ 23dBm
Yes
Resolder or change RFS1000, C1086, L1057
No
Check component soldering status ok?
U1095, C1094, C1095 Resolder or change
U1095, C1094, C1095
No
Yes
Receiver is OK? Resolder or change UCP500
No
Yes
Yes
Resolder or change U2099
No
END
![Page 50: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/50.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-42. Force Touch
No
No Reconnect the HDC9000
Yes
END
Yes
No Resolder or Replace U9000
Yes
Replace the UB
Check TSP Connector on MAIN PBA
Force does not work 1. Test Path : Phone dial → *#0*# 2. Tab ‘Sub key’, and then press home button with finger. 3. Check if the display color changes blue after that.
Check VDD_TSP_1.8V (C9084, C9064) VDD_TSP_3.0V (C9025, C9063)
![Page 51: 8. Level 3 Repair...Confidential and proprietary-the contents in this service guide subject to change without prior notice Distribution, transmission, or infringement of any content](https://reader035.vdocuments.net/reader035/viewer/2022071413/610b2aa7b0ebf52c2514c748/html5/thumbnails/51.jpg)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-43. Dex Station
Check the Dex UI
Check the IF Socket & SUB PCB connector
Abnormal
YES
Check the Charging UI Abnormal
Check the EDP AUX SW (U4003)
Check the CCIC (U7006)
Abnormal Replace IF Socket or SUB PCB
Dex Station does not work
END
Normal
YES