DIY Horizontal Bar Balustrade System

DIY Vertical Bar Balustrade System

DIY 10mm Glass Balustrade System

DIY Prefabricated Staircase System

April 2011

www.stallionstainless.com.au

INTRODUCING:The Revolutionary Stallion Stainless

DIY Range Of Staircases & Balustrades

CS1 - Curved Saddle

FS1 - Flat Saddle HT 12.7mm - Hollow Tubeavailable in 304 and 316 grade

BHS - Bar Holder (Square Post)

BHR - Bar Holder (Round Post)

BHCE - Closed End Bar HolderNo bullet end needed

RPD-980 - Round PostRPD-900 - Round PostSPD-980 - Square PostSPD-900 - Square Post

BE 12.7mm - Bullet End

What is the Stallion Stainless Steel DIY Balustrade System?

It is our new range of ready-to-go posts and accessories for balustrades in a 316 Stainless Steel Satin Finish.

Where can it be used?

Both inside and outside of your home. 316 Stainless Steel is the best corrosion resistant steel available, particularly when used outside or in coastal locations. Like all products that are subject to the outside elements, if they are not regularly maintained they will deteriorate in appearance. Productscan be applied to prevent deterioration can be found at most good hardware stores.

DIY Horizontal Bar Balustrade System

DIY Vertical Bar Balustrade System

Installation Guide at www.stallionstainless.com.au

FREE SHIPPING

AUSTRALIA

WIDE

DIY VERTICAL BAR BALUSTRADE SYSTEM

FS1 - Flat Saddle

P1 - Patented Adjustable Pivot Arm To Suit 12.7mm Square Tube

P2 - Patented Adjustable Pivot Arm To Suit 38.1mm Square Tube

ST 38.1mm - Square Tube(1.2mm wall)

SPD-980 - Square PostSPD-900 - Square Post

Adjustable pivots are � exible up to 38 degrees

ST 12.7mm - Square Tube(1.2mm wall)CS1 - Curved Saddle

• 2 styles of posts available• 40mm Square Post for top mounting• 50mm Round Post for top mounting

(cover plate supplied)• No welding or gluing required for the posts; they are

ready straight out of the box to fi x to the stair • Posts are available in 2 set lengths; 1 for the rake and

1 for the level. Length is measured from the bottom of the post to the top of the saddle (when fi tted)

• The saddle (the part the handrail fi ts to) can be adjusted to suit any angle and even more

importantly can be removed to make the fi xing of the handrail easier

• 2 different balustrade options are available that can be fi tted to the posts

• Glass Clamps for both the square and round posts to suit 8mm and 10mm glass

• Horizontal Bars, the holders (for both square and round posts) and bullet ends

• All parts are kept in stock for immediate delivery• Recently upgraded design• Heavy duty cast saddles• 4 fi xings to base plate

NEW!

PATENTED DESIGNThis is the latest vertical DIY balustrade system. It has been developed to accommodate the issue associated when you have a balcony or void area higher than 4 metres. This DIY system is currently only available with square posts and is only available in 316 certifi ed satin fi nish.

What are the key features and benefi ts of the Stallion range?

DIY Vertical Bar Balustrade System

Installation Guide provided upon request

FREE SHIPPING

AUSTRALIA

WIDE

DIY 10mm Glass Balustrade System

GC1 - 8-10mm Rubber Glass Clamp (Round Post)CS1 - Curved Saddle

Double wrapped, Waterproof packaging used to avoid scratching.

GC2 - 8-10mm Rubber Glass Clamp (Square Post)FS1 - Flat Saddle

RPD-980 - Round PostRPD-900 - Round PostSPD-980 - Square PostSPD-900 - Square Post

This system is also available in a Stainless Steel mirror fi nish. Just Released!

Please Note: Raking custom angle panels require MDF templates usually made by local glass suppliers. ie - Viridian.

Toughened Clear Glass Sizes In Stock10mm 850×1500 10mm 850×85010mm 850×1450 10mm 850×80010mm 850×1400 10mm 850×75010mm 850×1350 10mm 850×70010mm 850×1300 10mm 850×65010mm 850×1250 10mm 850×60010mm 850×1200 10mm 850×55010mm 850×1150 10mm 850×50010mm 850×1100 10mm 850×45010mm 850×1050 10mm 850×40010mm 850×1000 10mm 850×35010mm 850×950 10mm 850×30010mm 850×900 10mm 850×250

Frosted or translucent glass can be ordered upon request

Installation Guide provided upon request

FREE SHIPPING

AUSTRALIA

WIDE

DIY Prefabricated Staircase System

Beams come in options: RHS 200mm x 100mmx 6m or 200mm x150mm x 6m

Setting out stairs ready for welding

Stairs being positioned and lifted with block & table

Stairs awaiting packagingand delivery to Sydney

Plates cut to size & drilled

Products are re-checked prior to shipping

A fully welded system ready to be disassembled

Stairs awaiting packaging and delivery to Melbourne

Stumps cut to angle & length

Heavy duty mig welding.

Stairs all etch primed and packaged ready to ship locally or interstate.

Stairs awaiting packaging and delivery to Tasmania

Stairs all etch primed and packaged

Stairs awaiting packagingStairs awaiting packaging Stairs awaiting packaging Stairs awaiting packaging Stairs awaiting packaging

These staircases are usually packaged pre-fi tted ready for delivery inter-state or regional WA. To pre-make these staircases, it is very simple and all that is needed is a basic sketch and the dimensions. In some instances, we can arrange for the dimensions to be measured by our skilled tradespeople to ensure a high quality and accurate product is manufactured.

The Process Of Manufacturing Our Prefabricated Stairs

We Manufacture To Suit Requests And Drawings Sent From All Over Australia. Free Shipping!

Custom-Made For Easy Installation

Treads getting glued up on a press machine

Malaysian Cherry Treads

We custom make all timber treads in our own factory, using 3 different timbers to match existing timber fl oors or other timberwork

Victorian Ash Treads

Fully adjustable to suit any angle or height.

Treads getting cut to size

Jarrah TreadsMalaysian Cherry Treads Victorian Ash TreadsVictorian Ash Treads

Treads getting sanded

Jarrah Treads

Some recently completed DIY assemblies that are being further developed by our team...

Some recently completed jobs done with steel stringers and glass treads...

These modern steel and glass staircases can add that extra touch of elegance to any entrance, home or workplace. The specially made glass treads allow the transfer of light through the stairs and can provide an atmospheric and open design.

Stainless Steel & Timber Handrails

Timber Handrails: Suitable For Internal Use.

Our timber handrails can be made from a variety of different timbers. These range from standard timbers such as Jarrah, Victorian Ash or Malaysian Cherry up to exotic species such as American Oak or Marri.

Each timber handrail is unique and built to fi t your taste and budget.

Stainless Steel Handrails

Stainless Steel handrails can be used in both mirror or satin fi nish. The most common size is 50mm round railing.

Handrails can be supplied in a sand fi nish, however we also offer high quality single packed spray fi nish lacquer.

49mm Round Handrail and 49mm Round with Flat Base

Elliptical Handrail70mm x 43mm

Stallion Stainless is expanding quickly across Australia, Recently having had huge success at the Melbourne Home show.

Stallion Stainlesss - Setting The Standards in the Staircase Industry Across Australia.

Head Offi ce (Perth)Ph: 08 9458 2646 Fax: 08 9356 2082Mob: 0417 966 807stallionstainless@westnet.com.au23 Morgan Street, Cannington WA 6107

Melbourne Offi ceMob: 0431 487 757stallionstainlessmelbourne@westnet.com.au

OPENING HOURS

Mon-Thur 7.30am - 4.00pmFriday 7.30am - 2.00pmSaturday By Appointment

www.stallionstainless.com.au

Stallion Stainless is the � rst Australian staircase company which specialises in both stainless steel and timber all combined in one factory.

When you contact our Stallion Stainless head of� ce you won’t be passed onto a sales person. You will be dealing directly with the owner of the company.

Paul Taddei Phone: +61 8 9458 2646Mobile: +61 0417 966 807

Other Products...

Custom Balustrade & Staircases

DIY Stainless Steel Fittings

DIY Stainless Steel Pool Fittings

Screws & Fasteners

Staircases In Many Styles