8 stage electroplating plating line
TRANSCRIPT
Home > Surface Treatment Process Plant & EquipmentElectroplating & treatment lines >
8 Stage Electroplating Plating Line
Stock Code: PRO500Model: 8 Stage Electroplating Plating LineYear of Manufacture: 2008 (Ref)New or Used: Used (Second Hand)Work Envelope (WxDxH mm): 760/2400 x 600 x 900Process Stages: 8Other Info: 4 off RectifiersExternal Dimensions (WxDxH): 13,700 x 1120 x 1020 mm
Electrochemical Supplies Ltd. modern high quality multi station process line suitable for a wide range of plating andimmersion surface treatments - Fully refurbished in 2008
Line consists of 8 Tanks, 4 Rectifiers, control panel and extraction
Tanks are of Polypropylene construction. 9mm thick polypropylene and supplied with the following:-
43mm Top flange around circumference of TanksPolypropylene reinforcing belly bands1" Ø drain outletRear lipextraction duct with output spigot and extraction slotsPolypropylene Anode bar saddles100mm overlapping rim atfront and rear of the plantTank apertures each have 30mm internal downturn for each lid locationTank apertureseach have polypropylene Lid with lifting handle and location strip, to ensure rigidityLine is cladded at each end.Cladding comprises of sections of 6mm thick polypropylene, each mounted directly onto metal frames (sides &bottom) secured with Stainless Steel fastenersEach panel has valve access portholes with pendulum porthole coversallowing easy access to the valves, along with the facility to remove each panel to gain access to the pipework orTank base.
Tank detail and dimensions:-
Tank
The Marketplace for Surface Technology.New and Used Process Equipment & Machinery.
Riley Industries LtdA subsidiary of Barry Riley & Sons Ltd. Director: M P A Riley, Secretary: D Hemming
Registered in England no. 1965748
Page 1/5
Home > Surface Treatment Process Plant & EquipmentElectroplating & treatment lines >
8 Stage Electroplating Plating Line
Description
Length mm
Width mm
Height mm
Volume (Litres)
1
Iridite NCP
1250
600
900
530
2
Acid Copper
2400
600
900
1200
3
Acid Copper
2400
600
900
1200
The Marketplace for Surface Technology.New and Used Process Equipment & Machinery.
Riley Industries LtdA subsidiary of Barry Riley & Sons Ltd. Director: M P A Riley, Secretary: D Hemming
Registered in England no. 1965748
Page 2/5
Home > Surface Treatment Process Plant & EquipmentElectroplating & treatment lines >
8 Stage Electroplating Plating Line
4
Rinsing
1200
600
900
530
5
Acid Copper
1300
600
900
575
6
Bright Silver
1300
600
900
575
7
Alocrom
760
600
900
The Marketplace for Surface Technology.New and Used Process Equipment & Machinery.
Riley Industries LtdA subsidiary of Barry Riley & Sons Ltd. Director: M P A Riley, Secretary: D Hemming
Registered in England no. 1965748
Page 3/5
Home > Surface Treatment Process Plant & EquipmentElectroplating & treatment lines >
8 Stage Electroplating Plating Line
360
8
Electroless Nickel
760
600
900
360
Rectifiers2 off 100 amp 15 volt Rectifiers2 off 100 amp 10 volt Rectifiers
Filters3 off Serfilco Filters with motor - Model no: CS6EO3DMO.5
Serfilco Filtration Systems are compact, corrosion resistant and extremely simple to operate. A choice ofconstruction materials allows their use with most liquids, including strong chemicals at elevated temperatures.
Serfilco products have gained global approval for recirculation purification of most electroplating and chemicalprocess solutions. They have proven to be a reliable workhorse for over half a century.
With numerous systems in service around the globe, you can be confident a Serfilco Filtration System will improvethe clarity of your process solutions, increase production quality, and reduce process cost.
Choose a basic filtration system with your choice of media, pump and filter chamber. Then select from a wide rangeof optional equipment to customize your system. Call us and we’ll help you select the perfect system for yourapplication.
Serfilco filters can accommodate a variety of filter media including cartridges, disks, bags, permanent media orcarbon and GAC. The rugged construction features a low pressure drop for long intervals of continuous high flowand long service life.
Therm-O-Level ControllerControls temperature of liquids by switching heaters(s) on and off according to the temperature required. In additionincluded in the device is a safety low level cut off which will switch off the heater whatever the setting should theliquid fall below the probe.
The Marketplace for Surface Technology.New and Used Process Equipment & Machinery.
Riley Industries LtdA subsidiary of Barry Riley & Sons Ltd. Director: M P A Riley, Secretary: D Hemming
Registered in England no. 1965748
Page 4/5
Home > Surface Treatment Process Plant & EquipmentElectroplating & treatment lines >
8 Stage Electroplating Plating LineThe Therm-O-Level consists of two parts:-1) The unit itself which in standard form will control 3kw of heater(s) this is enclosed in a robust case of PVC which issealed to IP55 standard with three cable glands.Situated on the front of the unit is:-
Mains on/off switch for heater & UnitDisplay which normally indicates actual temperatureSet button which whenpressed will make display indicate set temperatureSet control which is used in conjunction with set button to setdesired temperature
2) Non corrosive 10mm Ø probe. 300mm long with a 2 meter lead, this probe detects the temperature in the liquidrelaying the information back to the unit.
* Footprint of plating line (Tanks) : 13,700 x 1120 x 1020 mm (L x W x H) *
* Overall height of the plant up to ceiling (Extraction Chimney): 2100 mm *
View 8 Stage Electroplating Plating Line on our web site at https://www.rileysurfaceworld.co.uk/machines/30725.htm
PHOTOGRAPHS TAKEN PRIOR TO REFURBISHMENT.
The Marketplace for Surface Technology.New and Used Process Equipment & Machinery.
Riley Industries LtdA subsidiary of Barry Riley & Sons Ltd. Director: M P A Riley, Secretary: D Hemming
Registered in England no. 1965748
Page 5/5