8me metal enclosed eng
TRANSCRIPT
-
7/30/2019 8me Metal Enclosed Eng
1/8
8ME SYSTEM
36 kV 2500 A 25 kA
AIR INSULATED
METAL ENCLOSED WITH HANDCART
MEDIUM VOLTAGE CUBICLE
-
7/30/2019 8me Metal Enclosed Eng
2/8
Medium Voltage (M.V.) Cubicles are one of the key points on uninterrupted energy & operational
safety. For these purpose we manufacture 8ME-36R1 cubicles according to the IEC6271-200
standards, those can be used in industrial plants & kiosk type transformer buildings. Cubicle is
modular unit type & equipped either with vacuum type of SF6 gas type breaking system,
withdrawable handcart & metal-clad system.
Cubicle is built with 4 separate compartments; cable inlet, busbar, low voltage & breaker
compartments. By this, during a fault, only the faulty area is defected & other compartments are
protected.
Vacuum breaker technology provides long term high performance.
Easy assembly system of the cubicles & having withdrawable handcart provides fast intervention
to the breaker during a fault.
8 ME CUBICLES
- Operator & operational safety
- Maintenance free circuit components
- Modular structure type & compatibility- Easy assembly at site
- Expansion possibility to right side & left side
- Possibility of adding new unit & deducting existing unit in future
- It can be used on distribution systems by its safe operational features (type tested)
8ME SYSTEM 36 kV 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
GENERAL INFORMATION
-
7/30/2019 8me Metal Enclosed Eng
3/8
Places Of Application
- Rated voltages up to 36 kV
- Rated short-circuit breaking currents up to 25 kA
- Feeder and busbar rated currents up to 2500A
8ME Type Cubicles Can Be Used At
- Power stations, transformer stations and switching
substations of public utilities
- Cement industry
- Iron and steelworks
- Rolling mills
- Mines
- Chemical industry
- Oil industry
- Pipelines
- Oshore installations
- Electrochemical industry
- Petrochemicals industry
- Railway power supplies- Shipbuilding industry
- Diesel power stations
- Emergency power supplies
- Airports
- MV motor starter systems
- Air Compressor Applications
Advantages
- Long term usage with maintenance free vacuum breaker & drive mechanism.
- Handcart can be taken out of the cubicle by one person using the guidescrew mechanism
- Usage of standard isolator
- Usage of standard measurement transformer
- Usage of standard circuit breakers
- Maintenance and addition can easily been done by using the standard copper busbar.
8ME SYSTEM 36 Kv 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
PLACES OF APPLICATION
-
7/30/2019 8me Metal Enclosed Eng
4/8
8ME series Cubicles had been designed to be used indoors. Protection level is IP4X.
Cubicle Body
It has been manufactured with 2-2, 5 mm thick galvanized metal sheets. The outer body & the base
have earthing.
Earthing System
In 8ME metal body cubicles, in order to provide security during maintenance procedures, the chassis
of the main circuit components & all the other components that requires earthing, which are
normally accessible, have been connected directly to the earthing busbar, located in the cubicle.
Each cubicles earthing busbar has been located & visible in the front side in order to have the
continuity of the earthing. If more than 1 piece of these cubicles will be used to make a plant by xing
them side by side, the earthing busbars are connected by bolts & it appears in the front of the cubicle
group. This earthing busbar then connected to the systems earthing & by this the earthing
procedure is completed.
Mimic Diagram
On the 8ME Metal Clad cubicles front panel, where control unit is located, there is a simple mimic
diagram that can easily been understood. By this the location of the cubicles main circuit
components can easily been identied.
Operational & Maintenance Safety Points
- Operation of the circuit breaker can be done only when
the door is closed.
- In order to open the door of the cubicle,
the handcart should be separated & locked on that position.- Changing of the position of the handcart from separated
position to operation can be done only when the
door is closed.
- All locks can be done only by a mechanically
working special key.
- The cubicles body is completely closed all
around on all the operation modes. The
external security is provided by this.
- When the handcart set to TEST position, inner
security is provided by the automatically
closing metal curtains.
STRUCTURAL SPECIFICATIONS
8ME SYSTEM 36 Kv 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
-
7/30/2019 8me Metal Enclosed Eng
5/8
STRUCTURAL SPECIFICATIONS
1-Main Busbar compartment
2-Current Transformer
3-L.V. & Protection Relay Compartment
4-Vacuum Breaker
5-Breaker Handcart6-Pressure Releasing Plate
7-Earthing switch
8-M.V. Cable connection
9-Busbar Bushing
10-Operation mechanism of earthing switch.
8ME SYSTEM 36 Kv 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
8ME 36 R1 METAL ENCLOSED PANEL
DOOR OPENED FRONT VIEW DOOR CLOSED FRONT VIEW
-
7/30/2019 8me Metal Enclosed Eng
6/8
8ME SYSTEM 36 Kv 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
Outgoing Cubicle
Incoming Cubicle with Breaker Incoming Cubicle with
Breaker & Potential TransformerMeasuring Cubicle
Coupling Cubicle Bus Riser Cubicle
8ME SYSTEM 36 Kv 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
STRUCTURAL SPECIFICATIONS
VCB & SF6 : Vacuum & SF6 Breaker ES : Earthing Switch
CT : Current Transformer VT : Voltage Transformer
-
7/30/2019 8me Metal Enclosed Eng
7/8
TECHNICAL SPECIFICATIONS OF 8ME CUBICLES
Cubicle Type
Rated Voltage
Rated Current
Rated Frequency
Rated Short Time withstand current
Rated Peak withstand current
Rated Insulation Level
Power Frequency
(phase to earth / across open contacts)
Lightning impulse withstand voltage
Rated Short Circuit Continuous TimeMaximum Operating Temperature
Protection Degree
Main Busbar Material
Cubicle Sizes
8ME-36R1
36 kV
1250-2000-2500 A
50-60 Hz25 kA (1s)
63 kA
120 kV
1s45C
IP4X
Electrolytic Copper
W1600 X D1800 X H2500
70 kV
TECHNICAL SPECIFICATIONS
8ME SYSTEM 36 Kv 25kA 2500 A Air Insulated Metal Enclosed M.V.Cubicles With Handcart
-
7/30/2019 8me Metal Enclosed Eng
8/8
www.egesim.com.tre g e s i m @ e g e s i m . c o m . t r
EGESIM HIGH TECHNOLOGYElectric & Electronic Co. Ltd.
Istanbul FactoryGebze Organized Industrial Zone400 Street No:410 41480Gebze-Kocaeli/TURKEYTel: +90 262 751 28 00 PbxFax: +90 262 751 27 28
EGESIM ELECTRIC &AUTOMATION SYSTEMS Co.Ltd.
EGESIM ELECTRIC Co.Ltd.
Izmir office1204 Street No.41/1-I 35110Yenisehir IZMIR / TURKEYTel +90 232 433 30 25 PbxFax +90 232 459 90 42
Izmir FactoryAtaturk Bulvari No.4Menemen Free Zone 35660Menemen IZMIR / TURKEYTel +90 232 842 60 85 PbxFax +90 232 842 60 86
GERMANY / Cologne (Office)
Schanzenstrasse 2251063 KlnGERMANYTel +49 (0)221 65092750Fax +49 (0)221 65092755
RUSSIA / Moscow (Office)JORDAN / Amman(Middle East Office)
PO. Box 608,Stari Oskol 12,Russia 309 512Tel: +7 909 697 07 23
Shami Plaza Building,Ilya Abu Madi Street,Shmaisani, P.O.Box:942325,Amman 11194 JORDAN