· 900 ,which enable the bearing to bear large axial force and the tipping moment. when the radial...

16

Upload: others

Post on 10-Mar-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 2:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 3:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 4:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 5:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 6:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 7:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 8:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 9:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 10:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 11:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 12:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 13:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 14:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 15:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed
Page 16:  · 900 ,which enable the bearing to bear large axial force and the tipping moment. When the radial force is larger than 1/10 Of the axail force the races should be newly designed