900/1800 dual-band selective repeater - kathrein · pdf file• indoor repeater solution to...

2
782 10763 Page 1 of 2 www.kathrein.de 936.4108 Subject to alteration. KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494 900/1800 Dual-Band Selective Repeater Low Band: 880 ... 915 MHz / 925 ... 960 MHz High Band: 1710 ... 1785 MHz / 1805 ... 1880 MHz Type No. 782 10763 900/1800 Dual-Band Selective Repeater Technical Data Out of band gain Spurious emission Intermodulation product Frequency range Bandwidth Output power Indoor repeater solution to easily improve coverage within designated areas Easy deployment Compact design Wall mounting, easy to install User-friendly operation Customized single band solution within each of the two operational frequency ranges Front View Rear View Specification Uplink Downlink Low band 880 ... 915 MHz 925 ... 960 MHz High band 1710 ... 1785 MHz 1805 ... 1880 MHz Low band 0.2 ... 25 MHz (customized tuning) High band 0.2 ... 25 MHz (customized tuning) Maximum gain 70 dB Auto gain control 40 dB Gain control (via control panel) 31 dB in step of 1 dB Gain flatness 5 dB (p-p) 15 dBm / total output power for GSM/DCS each 12 dBm / Ch at 2 channels for GSM/DCS each 9 KHz – 1 GHz –36 dBm 1 GHz – 12.75 GHz –30 dBm 9 KHz – 1 GHz –36 dBm 1 GHz – 12.75 GHz –30 dBm ±400 KHz < 50 dB ±600 KHz < 40 dB ±1 MHz < 35 dB ±5 MHz < 25 dB Noise figure 7 dB Return loss –10 dB Group delay < 4.5 μs External Power Supply Nominal input voltage 115/230 V Line frequency 50/60 Hz Admissible input voltage range 90 – 264 V Secondary voltage +7 V ±5 % = Current drain Max. 11.4 A = Consumption Typ. 75 W Input connector IEC 320-C13 Ingress protection class IP30 RF Connector/Impedance N-type female / 50 Ω (Nominal) Dimensions Repeater (W x H x D) 264 x 127 x 225 mm (without connectors) Power supply unit (W x H x D) 103 x 60 x 185 mm Weight 4.6 kg Operating Temperature range: Repeater –10 °C +50 °C Power supply unit 0 °C +40 °C Tuning: The repeater is tuned to the desired bandwidth at the factory. When ordering please specify the desired frequency range for uplink and downlink.

Upload: hahuong

Post on 07-Feb-2018

229 views

Category:

Documents


1 download

TRANSCRIPT

782 10763 Page 1 of 2 www.kathrein.de

936.

4108

S

ubje

ct to

alte

ratio

n.

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494

900/1800 Dual-Band Selective RepeaterLow Band: 880 ... 915 MHz / 925 ... 960 MHzHigh Band: 1710 ... 1785 MHz / 1805 ... 1880 MHz

Type No. 782 10763900/1800 Dual-Band Selective Repeater

Technical Data

Out of band gain

Spurious emission

Intermodulationproduct

Frequency range

Bandwidth

Output power

• Indoor repeater solution to easily improve coverage withindesignated areas

• Easy deployment• Compact design• Wall mounting, easy to install• User-friendly operation• Customized single band solution within each of the two

operational frequency ranges

Front View

Rear View

Specification Uplink DownlinkLow band 880 ... 915 MHz 925 ... 960 MHzHigh band 1710 ... 1785 MHz 1805 ... 1880 MHzLow band 0.2 ... 25 MHz (customized tuning)High band 0.2 ... 25 MHz (customized tuning)

Maximum gain ≥ 70 dBAuto gain control ≥ 40 dBGain control (via control panel) 31 dB in step of 1 dBGain flatness ≤ 5 dB (p-p)

≥ 15 dBm / total output power for GSM/DCS each≥ 12 dBm / Ch at 2 channels for GSM/DCS each

9 KHz – 1 GHz ≤ –36 dBm1 GHz – 12.75 GHz ≤ –30 dBm9 KHz – 1 GHz ≤ –36 dBm1 GHz – 12.75 GHz ≤ –30 dBm±400 KHz < 50 dB±600 KHz < 40 dB±1 MHz < 35 dB±5 MHz < 25 dB

Noise figure ≤ 7 dBReturn loss ≤ –10 dB Group delay < 4.5 μsExternal Power Supply

Nominal input voltage 115/230 V ∼Line frequency 50/60 HzAdmissible input voltage range 90 – 264 V ∼Secondary voltage +7 V ±5 % =Current drain Max. 11.4 A =Consumption Typ. 75 WInput connector IEC 320-C13

Ingress protection class IP30RF Connector/Impedance N-type female / 50 Ω (Nominal)Dimensions

Repeater (W x H x D) 264 x 127 x 225 mm (without connectors)Power supply unit (W x H x D) 103 x 60 x 185 mm

Weight ≤ 4.6 kgOperating Temperature range:

Repeater –10 °C – +50 °CPower supply unit 0 °C – +40 °C

Tuning:The repeater is tuned to the desired bandwidth at the factory.When ordering please specify the desired frequency range foruplink and downlink.

782 10763 Page 2 of 2 www.kathrein.de

936.

4108

S

ubje

ct to

alte

ratio

n.

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494

900/1800 Dual-Band Selective RepeaterLow Band: 880 ... 915 MHz / 925 ... 960 MHzHigh Band: 1710 ... 1785 MHz / 1805 ... 1880 MHz

As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risksthat may arise when products are used under extraordinary operating conditions.

These facts must be considered during the site planning process.

The installation team must be properly qualified and also be familiar with the relevant national safety regulations.

The details given in our data sheets have to be followed carefully when installing the repeaters, antennas, filters, combiners,amplifiers and accessories.

The limits for the coupling torque of RF connectors, recommended by the connector manufacturers must be obeyed.

Any previous datasheet issues have now become invalid.

Please note:

External power supply unit with DC output cable,Length 1050 mm

AC input cable,Length 1830 mm