the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

90s 3D Glasses

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

90s 3D Glasses

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Step 1:

Print the stencils and cover it up with either masking orclear tape

Step 2:

Doodle the rim of the glasses with any color you like.

Step 3:

Take out the lens from any 3D glasses you have.

Step 4:

Flip the rim of the glasses and place the lens on top

Step 5:

Doodle them together.

Step 6:

While it is hot, bend them slightly.

90s 3D Glasses

90s 3D Glasses

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Step 7:

Doodle the temple of the glasses. (For a stronger temple,doodle them twice.)

Step 8:

Doodle up the end piece in both sides of the glasses.

Step 9:

To make a screw, cut a small piece of strand and stick it on the end piece.

Step 10:

Using your unblocking tool, doodle a hole. (Cover your unblocking tool with masking tape so that it is easier totake out.)

Step 11:

While it’s hot, roll them to make the tube tight.

Step 12:

Combine the tube with the temple.

90s 3D Glasses

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Step 13:

Insert the temple in the small strand.

Step 14:

Doodle the bottom part of the end piece.

Step 15:

Adjust the hinge so that the temple is kept in place. Don’t forget to repeat Step 8-15 on the other side of the glasses!