a directional bar tile plan b detail 3 raised ada logo detail 4 detail 2 project detail 1 ·...
TRANSCRIPT
DRAWING NO.
MATERIAL
WAYFINDING TILE
TRADE PART NO.
PROJECTSURFACE APPLIED DIRECTIONAL BAR TILEPART SIZE: 6" x 48" (152mm x 1219mm)
SMC COMPOSITE
PHONE: (800)372-0519
EMAIL: [email protected]
WWW.ADATILE.COM
DATE
01-26-18
'B'DIRECTIONAL BAR TILE PLAN
DETAIL 2
BARTILERETNF648_
ADA-DGTNF_648
SECTION A
DETAIL 2
SEE DETAIL 1
0.378 [9.6]
0.200 [5.1]
ADHESIVE BED OVEREXISTING SUBSTRATE
PERIMETER SEALANTBASF NP 1 (OPTIONAL)
'A'
48.00 [1219.2]
6.000 [152.4] 12.000 [304.8] 12.000 [304.8]
'A'
SECTION B
10 FASTENER LOCATIONS
PRIMARY DIMENSION INCHES mm IN PARENTHESES
ALL DIMENSIONS NOMINAL
12.000 [304.8] 6.000 [152.4]
11.280 [286.5] 0.720 [18.3]
6.000 [152.4]
SEE DETAIL 3
DETAIL 3RAISED ADA LOGO
0.063 [1.6]
0.300 [7.6]
1.280 [32.5]
0.770 [19.6]
0.191 [4.8]
0.045 [1.1]
0.200 [5.1]
0.188 [4.8]
6.000 [152.4]
3.000 [76.2]
DETAIL 1
6.000 [152.4]
3.000 [76.2]
1.500 [38.1]
0.190 [4.8]
0.260 [6.6]
0.220 [5.6]
1.000 [25.4]
0.200 [5.1]
0.281 [7.1]
0.100 [2.5] 0.30
[7.6]
0.306 [7.8]
1.280 [32.5]
0.200 [5.1]
82°
0.09 [2.3]
23°
0.188 [4.8]
ADHESIVE BED OVEREXISTING SUBSTRATECHEMLINK M1
DETAIL 4
DETAIL 4
PANEL GROOVE
0.125 [3.2]
0.35 [8.8]
FLAT BACKEDPANEL
14" X 11
2" COMPOSITESLEEVE ANCHORW/S.S. PIN (10 TOTAL LCCATIONS)(NOTE: 6 TOTAL LOCATIONSPER PART IF SPLIT INTO 2 EA 6"X24")
COMPOSITE SLEEVE ANCHORWITH STAINLESS STEEL NAIL
14" X 11
2" (6.35mm X 38.1mm)
0.1
92 [4.9
]0.058 [1.5]
0.2
34 [5.9
]
0.032 [0.8]
1.500 [38.1]
0.440 [11.2]
0.980 [24.9]
0.1
15 [2.9
]
0.071 [1.8]
R0.640 [R16.3]
(6 FASTENER LOCATIONS FOR 6"X24" PART)PLANS AND DETAILS