a full line of high performance, aluminum propellers · note: actual xhs® / xhs ii™ hub kit may...
TRANSCRIPT
Note: Actual XHS® / XHS II™ hub kit may appear differently than above picture depending on your application.
A Full line ofHigh Performance,
Aluminum Propellers
XHS® PROPELLER SERIESMichigan Wheel’s Xchangeable Hub
System absorbs impact and stress caused by shifting gears and is designed to spin
under significant impact to help protect your lower unit. XHS® / XHS II™ is also
designed to be interchangeable with Mercury’s Flo-Torq II™ hub system, potentiallysaving you money when
replacing or upgrading your propeller.
A Series (V6/V8)Available Sizes:
3-Blade: 15”, 17”, 19”, 21”, 23” pitch
4-Blade: 16”, 18”, 20” pitch
B Series (V4 / 4-Cylinder)Available Sizes:
3-Blade: 10”, 13”, 15”, 17”19”, 21” pitch
C Series (20 HP - 35 HP)Available Sizes:
3-Blade: 13”, 15”, 17” pitch4-Blade: 8”, 9”, 10” pitch
D Series (35 HP - 80 HP)Available Sizes:
3-Blade: 9”-16” pitch4-Blade: 8”, 9”, 10” pitch
E Series (9.9 HP - 30 HP)Available Sizes:
3-Blade: 9”-14” pitch
®®
VORTEX® XHS® SERIES APPLICATION CHART
NOTE: If this reference does not include your application, please see Michigan Wheel Marine 2011 OBSD Catalog.
Evinrude®, Johnson® and Cobra® are registered trademarks of BRP US, Inc. Honda® is a registered trademark of American Honda Motor Co., Inc. Mercury®, Mariner®, Force®, MerCruiser®, and Alpha One™ are registered trademarks of Brunswick Corporation. Nissan® is a registered trademark of Nissan Marine. Suzuki® is a registered trademark of American Suzuki Motor Corporation. Tohatsu® is a registered trademark of Tohatsu Corp. Volvo® is a registered trademark of AB Volvo Penta. Yamaha® is a registered trademark of Yamaha Motor Corporation, U.S.A. Additional product names may belong to Original Equipment Manufacturers (OEM). All references to OEM and their trade names or their engines are for replacement identification purposes only.
1501 Buchahan Avenue SW • Grand Rapids, MI 49507 • Phone: 616.452.6941 • Fax: 616.247.0227 • E-mail: [email protected]
STEP 1: Locate Horsepower/Model and Year that corresponds with the engine application.Read across to reference XHS® / XHS II™ Hub Kit & propeller series that corresponds to engine brand.
X H S ® / X H S I I H U B K I T S
20 HP 1984-1997; 25/30 HP 1984 & Newer; 35 HP 1976 & Newer;30 HP (E-Tec) 2009 & Newer; 14 Tooth Spline .............................................118 ......... E25-30 HP (4-Stroke) 2004 & Newer; 10 Tooth Spline ...................................121......... E40, 50 HP (4-Stroke) 1999 & Newer; 13 Tooth Spline ...................................115 ......... D40-75 HP Small Gearcase (3-3/8”) 1975 & Newer; 13 Tooth Spline ............111 ......... C40-75 HP Large Gearcase (4-1/4”) 1968 & Newer; 13 Tooth Spline ......106* / 206 ... B60-70 HP (4-Stroke) 1998 & Newer; 13 Tooth Spline ...................................110 ......... B85-140 HP 1969 & Newer; 13 Tooth Spline .............................................106* / 206 ... B90 & 115 HP (4-Stroke) 2003 & Newer; 15 Tooth Spline........................125* / 225 ... B140 HP (4-Stroke) 2003 & Newer; 15 Tooth Spline .................................126* / 226 ... B90-140 HP, Lg. Gearcase 1976-1990; 15 Tooth Spline ............................101* / 201 ... A90-140 HP, Lg. Gearcase 1991 & Newer; 15 Tooth Spline .....................100* / 200 ... A150-300 HP 1976-1990; 15 Tooth Spline ..................................................101* / 201 ... A150-300 HP 1991 & Newer; 15 Tooth Spline ...........................................100* / 200 ... A200 & 225 HP 2004 & Newer; 15 Tooth Spline .......................................104* / 204 ... A
Evinrude/Johnson
25 HP 1995-1998; 10 Tooth Spline .................................................................120......... E40/50 HP 1995-1998; 70 HP 1991-1995; 75 HP 1996-1998; 13 Tooth ...102* / 202 ... B75-150 HP 1995 & Newer; 85-150 HP (Dual Exhaust) 1988-1994 ........102* / 202 ... B
Force
BF 25 1994 & Newer; BF 30 1995 & Newer; 10 Tooth Spline ......................119 ......... EBF 35/45 1991-1994; BF 40/50/50A 1995 & Newer; 13 Tooth Spline ...........113 ......... DBF 75 & BF 90 1995-1998; 15 Tooth Spline ............................................102* / 202 ... BBF 75 & BF 90 1999 & Newer; BF 115 & BF 130 1998 & Newer; 15 Tooth Spline ..................................107* / 207 ... B135-225 HP 2003 & Newer; 15 Tooth Spline ...........................................107* / 207 ... A
Honda
9.9, 15 HP (4-Stroke/Bigfoot/Sail) 1999-2005; 18 HP (Mercury) 1980-1985; 20/25 HP (Not 4-Stroke) 1980 & Newer; 10 Tooth Spline ............................120......... E25-30 HP (4-Stroke - Not Bigfoot) 2006 & Newer; 10 Tooth Spline ............122......... E30 HP 1994 & Newer; 35 HP 1984-1989; Model 402-500 1974-1976;Model 650 1972-1976; Model 402-500-700 1977-1984; 40/50 HP(2- & 4-Stroke, Not Bigfoot) 1977 & Newer; 48 HP (Mariner) All Years; 55 HP (Mercury/Sea Pro/Marathon) 1995 & Newer; 60 HP (Not Bigfoot) 1978 & Newer; 60 HP (Mariner) 1976; 70 HP Thru 1983; 80 HP (Mariner) 1977; 13 Tooth Spline .........................................................114 ......... D40-140 HP (Except 135 HP) 1961 & Newer; XR-4/XR-6; 15 Tooth ......102* / 202 ... B135-300 HP 1978 & Newer; 15 Tooth Spline ...........................................102* / 202 ... AMercruiser Alpha One & Bravo One (Less than 400 HP); 15 Tooth .....102* / 202 ... A
Mercury/Mariner/Mercruiser
25/30 HP 1986 & Newer; 25/30 HP (4-Stroke) 2002 & Newer; 13 Tooth ....122......... E35 HP (35B Only) Thru 1984; 40 HP 1984 & Newer; 50 HP (All Except 50C) 1992 & Newer; 50 HP 1992 & Newer ....................116 ......... D70A/70B 1981 & Newer; 13 Tooth Spline .......................................................112 ......... C50 HP (50C Only) 1987-1991; 55 HP 1981-1988; 60 HP 1986 & Newer60-140 HP, 4-1/4” Gearcase 1987 & Newer; 15 Tooth Spline .................109* / 209 ... B
Nissan/Tohatsu
Model 400 Cobra 1978-1991; 13 Tooth Spline ........................................106* / 206 ... BModel 800/Cobra/King Cobra 1978-1990; 15 Tooth Spline ..................101* / 201 ... AModel 800/Cobra/King Cobra 1991-1994; 15 Tooth Spline ..................101* / 201 ... ACobra SX 1994 & Newer; 19 Tooth Spline ..............................................105* / 205 ... A
OMC/Cobra Sterndrives
DT 20/25 1983-1988; DT 30 1983-1997; DT 30C 1987-1997; DT 25C 1989 & Newer; DF 25 & DF 30 (4-Stroke) 2000 & Newer; ..........121......... EDT 35C 1987-1990; DT 40 1983 & Newer; DF 40 & DF 50 (4-Stroke) 1999 & Newer; DT 50 & 50M 1983-1984; DT 55 1985-1997; DT 60 1983-1984; DT 65 1985-1997 ..............................................................115 ......... DDF 90 & DF 115 (4-Stroke) 2001 & Newer; 15 Tooth Spline .................125* / 225 ... BDF 140 (4-Stroke) 2001 & Newer; 15 Tooth Spline .................................126* / 226 ... B75-140 HP 1979 & Newer; DF 60 1998 & Newer;DF 70 (4-Stroke) 1998-2008; 13 Tooth Spline ......................................... 110* / 210 ... BDF 70A/80A/90A 2009 & Newer; 15 Tooth Spline ........................................227......... B150-300 HP (Including 4-Stroke) 1986 & Newer; 15 Tooth Spline ........104* / 204 ... A
Suzuki
20 HP 1996-1997; 25 HP 1980 & Newer; F25 (4-Stroke) 1998-200630 HP 1979-2002; 10 Tooth Spline .................................................................123......... EF30 (4-Stroke) 2001-2005; 40 HP & 50 HP (Not T50) 1984 & Newer;48 HP 1995 & Newer; 55 HP 1976-1995; F40 (4-Stroke) 1999 & Newer;F50 (4-Stroke) 1995 & Newer; 60 HP 1976-1991; F60 (4-Stroke) 1999 & Newer ........................................................................117 ......... DT50 1996 & Newer; 15 Tooth Spline .........................................................108* / 208 ... B60-100 HP (Including 4-Stroke) 1984 & Newer; 15 Tooth Spline ..........108* / 208 ... B115-130 HP 1984 & Newer; F115 (4-Stroke) 2000 & Newer; 15 Tooth .103* / 203 ... B80-140 HP 1978-1983; 15 Tooth Spline ....................................................102* / 202 ... B150-175 HP 1978-1983; 15 Tooth Spline ..................................................102* / 202 ... A150-250 HP (Including 4-Stroke) 1984 & Newer; 300 HP 2004-07 ......103* / 203 ... ASterndrives 1989-1993; 15 Tooth Spline ..................................................103* / 203 ... A
Yamaha
SX Sterndrives 1994 & Newer; 19 Tooth Spline .....................................105* / 205 ... AVolvo
STEP 2: Select propeller diameter and pitch from corresponding propeller series that best meets your vessel and usage.For complete installation, select a hub kit AND a propeller.
V O RT E X ® P R O P E L L E R S E R I E SPROP SERIES A
3 & 4-Blade
DIA x PITCH BLD # PART #
15-1/4 x 15 3 99200215 x 17 3 99200314-1/2 x 19 3 99200414-1/4 x 21 3 99200514 x 23 3 99200615 x 16 4 99220214-1/2 x 18 4 99220314 x 20 4 992204
PROP SERIES B
3-Blade
DIA x PITCH BLD # PART #
14 x 10 3 99210914 x 13 3 99211213-3/4 x 15 3 99211313-1/4 x 17 3 99211413 x 19 3 99211512-3/4 x 21 3 992116
PROP SERIES C
Standard 3-Blade
DIA x PITCH BLD # PART #
11-1/2 x 8 4 99240111-1/2 x 9 4 99240211-1/2 x 10 4 99240311-3/4 x 13 3 99230111-3/4 x 15 3 99230211-3/4 x 17 3 99230312-1/2 x 13 3 99231112-1/4 x 15 3 992312
PROP SERIES D
Standard 3 & 4-Blade Large Diameter 3-Blade
DIA x PITCH BLD # PART # DIA x PITCH BLD # PART #
11-1/8 x 8 4 99240111-1/2 x 9 4 99240211-1/2 x 10 4 99240310-3/8 x 11 3 99240410-3/8 x 12 3 99240510-3/8 x 13 3 99240610-3/4 x 14 3 99240710 x 15 3 99240810 x 16 3 992409
12-1/4 x 9 3 99260111-3/4 x 10 3 99260211-5/8 x 11 3 99260311-3/8 x 12 3 99260411-1/8 x 13 3 99260511-1/4 x 14 3 992606
PROP SERIES E
Standard 3-Blade
DIA x PITCH BLD # PART #
10-1/2 x 9 3 99250110-1/2 x 10 3 99250210-1/2 x 11 3 99250310-1/8 x 12 3 99250410-1/8 x 13 3 99250510-1/8 x 14 3 992506
XHS® Inner Hub Replacement Parts (Series A & B) 991201 Standard Replacement (Mercury® Part Number 835290A1) 991272 High Horsepower (Mercury® Part Number 850821A2 Solid Hub)
* Indicates Limited Quantities.
Engine Year & Configuration Engine Year & ConfigurationHub Kit Hub KitPropSeries
PropSeries