A Hub of Welding ARC WELDING MACHINE

TIG WELDING MACHINE

MIG/MAG WELDING MACHINE

SUBMERGED ARC WELDING MACHINE

PLASMA CUTTING MACHINE

AC/DC TIG WELDING MACHINE

PULSE TIG WELDING MACHINE

CNC OXY/PLSAMA CUTTING MACHINE

H BEAM PRODUCTION LINE

BOX BEAM PRODUCTION LINE

STUD WELDING MACHINE

PROJECTION WELDING MACHINE

SEAM WELDING MACHINE

SPOT WELDING MACHINE

CUSTOMIZED FIXTURES

WELDING ACCESSORIES

WELDING CONSUMABLES

Contact us : 95610143920/9560143921

Email : weldinghub@gmail.com, info@weldinghub.com; Web :- www.weldinghub.com Shop No.3,Plot No.745, Maha Singh Market, Gangatoli Road, Pooth Khurd

Opp.Sec-3 DSIIDC Bawana,Delhi - 110039

ARC WELDING MACHINE (INVERTER BASED)

Soft switch technology, high efficiency, low power consumption Automatic protection from overheat, over/under voltage Perfect Arc stability, quiet molten pool, fine welding seam Digital display of current and voltage, and pre setting of current Light in weight, easy to move and operate Arc force and hot start facility Suitable for all kind of electrode as 6013,7018,9018,hard facing etc Can be equipped with distance control box according to the

requirements of customers, simplify the operation Remote control current regulator with wire (optional) A voltage fluctuation of ±15% is allowable

TECHNICAL DETAILS OF ARC WELDING MACHINE (INVERTER BASED)

TIG WELDING MACHINE (INVERTER BASED)

Soft switch technology, high efficiency, low power consumption. Automatic protection from over current, over heat, over/under Voltage. TIG welding and MMA welding. Up/down slope of welding current arc Pre & Post flow of gas. With

automatic HF Control. In TIG welding stitch welding option is there. The build-in circuit guarantees

a good arc-ignition and crater filling In MMA welding, can be used with all kinds of electrode of diameter below 5.0mm.

In TIG welding can weld stainless steel, alloy steel, copper, titanium etc. Fine current Controlling.

The Arc Force knob can Increase the arc force and prevent the welding electrode struck to work pieces. Suitable for welding of the stainless steel parts, pressure vessels and pipeline, provide more efficiency. Remote control current regulator - optional. & A Voltage fluctuation of ± 15% is allowable.

NOTE: - Model TIG 200A & TIG 250 is also available without MMAW (ARC) function.

ARC 160 ARC 200 ARC 250 ARC 400 ARC 500 ARC 630

Rated Input Voltage (V) Single Phase (220 ± 15%)V, 50 Hz Three Phase (415 ± 15%)V, 50 Hz Rated Power at Max Current (kVA) 7.2 9.6 9.5 17 25.3 35

Output Current /Voltage (A/V) 30/21.2 ~ 60/26.4 30/21.2~2 00/28 30/21.2 ~250/30 40/21.6 ~400/36 40/21.6 ~500/40 50/22 ~ 630/44

25°C, 60% Duty Cycle, Output (A/V) 160/26.4 200/28 250/30 400/36 500/40 630/44

25°C, 100% Duty Cycle, Output (A/V) 125/25 155/26.2 194/27.8 310/32.4 387/35.5 488/39.5

Open Circuit Voltage Max (V) 65 60 66 68 76 76

Efficiency at Max Current (%) 80 80 85 91 85 85

Insulation Grade F F F F F F

House Protection Grade IP21 IP21 IP21 IP23 IP21 IP21

Weight (kg) 5.5 8 17.5 33 45 54

Dimension(L x W x H, mm) 290 x 132 x 203 400 x 193 x 291 505 x 203 x 375 550 x 280 x 545 650 x 310 x 640 685 x 302 x 660

Parameters TIG- 200A TIG -250A TIG-300 A TIG-400 A

Rated Input Voltage (V) Single Phase Three Phase (415 ± 15%)V, 50 Hz

Rated Power at Max Current (kVA) for TIG function 6.2 6.3 8.3 13.1

Rated Power at Max Current (kVA) for ARC function 9.6 9.5 12.1 18.2

Output Current /Voltage (A/V) for TIG function 10/10.4 ~ 200/18 10/10.4 ~ 250/20 10/10.4 ~ 300/22 20/10.8 ~ 400/26

Output Current /Voltage (A/V) for ARC function 20/20.8 ~ 200/28 20/20.8 ~ 250/30 20/20.8 ~ 300/32 40/21.6 ~ 400/36

25°C, 60% Duty Cycle, Output (A/V) for TIG function 200/18 250/20 300/22 400/26

25°C, 60% Duty Cycle, Output (A/V) for ARC function 200/28 250/30 300/32 400/36

25°C, 100% Duty Cycle, Output (A/V) for TIG function 155/16.2 195/17.8 230/19.2 310/22.4

25°C, 100% Duty Cycle, Output (A/V) for ARC function 155/26.2 195/27.8 230/29.2 310/32.4

Open Circuit Voltage Max (V) 56 62 62 68

Efficiency at Max Current (%) 80 85 85 85

Insulation & House Protection Grade F & IP21 F & IP21 F & IP21 F & IP21

Weight (kg) 9 19 19 29

Dimension(L x W x H, mm) 395 x 153 x 301 505 x 203 x 375 505 x 203 x 375 515 x 263 x 440

pulse tig welding machine

Soft switch technology, high efficiency, low power consumption.

A Voltage fluctuation of ± 20% is allowable. Light in weight & compact in size.

Digital display and presetting of current and voltage, wide adjustment range of voltage

AC/DC TIG & Pulse AC/dc TIG welding machine Soft switch technology, high efficiency, low power consumption. Automatic protection from over current, over heat, over/under voltage. TIG welding and MMA welding. Up/down slope of welding current arc Pre & Post flow of gas. With

automatic HF Control. In TIG welding stich welding option is there. The build-in circuit guarantees

a good arc-ignition and crater filling In MMA welding, can be used with all kinds of electrode of diameter below 5.0mm.

In TIG welding can weld stainless steel, alloy steel, copper, titanium etc. Fine current Controlling.

The Arc Force knob can Increase the arc force and prevent the welding electrode struck to work pieces. Remote Control is optional.

Suitable for welding of the stainless steel parts, pressure vessels and pipeline, provide more efficiency & A Voltage fluctuation of ± 20% is allowable.

Parameters TIG- 200 P TIG -315 P TIG 400 P

Rated Input Voltage (V) (220 ± 15%)V, 50 Hz Three Phase (415 ± 15%)V, 50 Hz Function TIG & MMA TIG & MMA TIG & MMA

Rated Power at Max Current (kVA) for TIG function 6.2 9 13.1

Rated Power at Max Current (kVA) for ARC function 9.6 13 18.2

Output Current /Voltage (A/V) for TIG function 10/10.4 ~ 200/18 10/10.4 ~ 315/22.6 20/10.8 ~ 400/26

Output Current /Voltage (A/V) for ARC function 20/20.8 ~ 200/28 20/20.8 ~ 315/32.6 40/21.6 ~ 400/36

25°C, 60% Duty Cycle, Output (A/V) for TIG function 200/18 315/22.6 400/26

25°C, 60% Duty Cycle, Output (A/V) for ARC function 200/28 315/32.6 400/36

25°C, 100% Duty Cycle, Output (A/V) for TIG function 155/16.2

245/19.8 310/22.4

25°C, 100% Duty Cycle, Output (A/V) for ARC function 155/26.2 245/29.8 310/32.4

Open Circuit Voltage Max (V) 41 56 46

Efficiency at Max Current (%) 80 85 85

Insulation Grade F F F

House Protection Grade IP21 IP21 IP21

Weight (kg) 8 29 30

Dimension(L x W x H, mm) 400 x 153 x 291 515 x 263 x 440 515 x 263 x 440

Parameters TIG- 200 AC/DC TIG- 250 AC/DC TIG- 315P AC/DC TIG-400P AC/DC

Rated Input Voltage (V) Single Phase (220 ± 15%)V, 50 Hz Three Phase (415 ± 15%)V, 50 Hz

Rated Power at Max Current (kVA) 6.2 8.6 9 13.1

Output Current /Voltage (A/V) 10/10.4 ~ 200/18 10/10.4 ~ 250/20 10/10.4 ~ 315/22.6 20/10.8 ~ 400/26

25°C, 60% Duty Cycle, Output (A/V) 200/18 250/20 315/22.6 400/26

25°C, 100% Duty Cycle, Output (A/V) 155/16.2 195/17.8 245/19.8 310/22.4

Open Circuit Voltage Max (V) 44 44 51 68

Efficiency at Max Current (%) 80 80 85 85

Insulation Grade F F F F

House Protection Grade IP21 IP21 IP21 IP21

Weight (kg) 22.1 23.4 33 39

Dimension(L x W x H, mm) 498 x 328 x 365 498 x 328 x 365 570 x 364 x 372 616 x 326 x 620

MIG/MAG WELDING MACHINE (INVERTER BASED)

Soft switch technology, high efficiency, low power consumption Automatic protection from overheat, over/under voltage Digital display and presetting of current and voltage, wide adjustment range of voltage

Particular function of automatically removing melting-ball from the end of the welding wire

Closed-loop system to control arc and waveform control system to adjust the arc force

Suitable for low carbon steel and low alloy carbon with solid flux cored welding wires of different specifications

Widely used in areas such as automobile, ship building, bridge, refineries, power sector and construction, and so on

Wire feeder is driven by four wheels, high power, and feeding wire stably Inbuilt stabilization of 15%,Small size, light in weight Support frequent welding, low spatters, high efficiency

SUBMERGED ARC WELDING (SAW) (INVERTER BASED)

Soft switch technology, high efficiency, low power consumption Automatic protection from over current, over temperature, over/under voltage, phase lacking Stepless current & voltage adjustments Supports MMAW & gouging Digital display of current, voltage & trolley speed Light in weight One machine two functions, high using ratio Automatic voltage fluctuation control device up to 15%

Parameters MIG 200 S MIG 250 F MIG 350 IJ MIG 500 IJ

Rated Input Voltage (V) Single Phase Three Phase (415 ± 15%)V, 50 Hz

Rated Power at Max Current (kVA) 8.2 8.7 13.9 25.5

Output Current /Voltage (A/V) 50/16.5 ~200/24 50/16.5 ~250/26.5 50/16.5 ~350/31.5 80/18 ~ 500/39

25°C, 60% Duty Cycle, Output (A/V) 200/24 250/26.5 350/31.5 500/39

25°C, 100% Duty Cycle, Output (A/V) 155/21.8 195/23.8 320/30 390/33.5

Wire Feed Mechanism Inbuilt External External External

Wire Feeding Speed (m/min) 2.5 ~ 18 2.5 ~ 13 3 ~ 15 3 ~ 15

Efficiency at Max Current (%) 80 85 85 85

Insulation Grade F F F F

House Protection Grade IP21 IP21 IP21 IP21

Weight(kg) 35 15 36 42

Dimension (L x W x H, mm) 655 x 300 x 665 920 x 300 x 665 550 x 280 x 545 650 x 310 x 640

Parameters MZ 1000 MZ 1250

Rated Input Voltage (V) Three Phase (415 ± 15%)V, 50 Hz

Rated Power at Max Current (kVA) 56 70

Rated Output Current Range (Amp) 112-1000 112-1250

Rated Output Voltage(V) 44 44

25°C, 60% Duty Cycle, Output (A/V) 1000/44 1250/44

25°C, 100% Duty Cycle, Output (A/V) 775/44 1000/44

Wire Feed Mechanism External External

Open Circuit Voltage Max (V) 76 76

Efficiency at Max Current (%) 85 85

Insulation Grade & House Protection Grade F & IP21 F & IP21

Weight(kg) 85 98

Dimension (L x W x H, mm) 760 x 380 x 820 760 x 380 x 820

PLASMA CUTTING MACHINES (INVERTER BASED)

Compact in size & Light in weight.

Specially designed for outdoor operation.

High power saving equipment.

Voltage fluctuation control device up to 15%.

High Cutting speed and narrow cutting seam. The cutting

is straight and smooth.

With tri-proofing cooling system causes high efficiency.

Widely used in shipbuilding, automobile maintenance,

iron structure and constructors etc.

Spot Cum Projection Welding Machines & seam welding machine

Capacitor Discharge Projection Welding Equipment

Large scale reduction in KVA demand

Welding of similar and dissimilar metals possible

No water-cooling required for electrodes

Installation and operating cost of the machine is less

Machine can run on Genset,

Welding joint free of blackening and distortion

No effect of voltage fluctuation on weld quality

Welding of heat sensitive parts is possible

Minimum heating of components during welding

As there is no heating of electrodes and no water cooling is required,

cost of manufacturing and maintenance of fixtures and electrodes is

reduced considerably

All recommended electrode materials are suitable for these welders

Models available: 0.5 - 30 KVA

Parameters CUT-40 CUT-60 CUT-80 CUT-100 CUT-160

Rated Input Voltage (V) Single Phase Three Phase (415 ± 15%)V, 50 Hz Rated Power at Max Current (kVA) 6.2 7.9 11.6 15.2 29.2

Rated Output Current Range (Amp) 15 ~ 40 20 ~60 20 ~ 80 20 ~ 100 20 ~ 160

Rated Max Output Voltage (V) 96 104 112 120 144

Duty Cycle (%) 60 60 60 60 60

Open Circuit Voltage Max (V) 230 295 280 268 320

Efficiency at Max Current (%) 80 85 85 85 85

Applicable Cutting Thickness(mm) 1~ 10 1 ~15 1 ~ 28 1 ~ 30 1 ~ 45

Insulation Grade F F F F F

House Protection Grade IP21 IP21 IP21 IP21 IP21

Weight(kg) 9 19 25 36.5 60

Dimension (L x W x H, mm) 395 x 153 x 301 505 x 203 x 375 515 x 263 x 372 575 x 286 x 502 670 x 337 x 617

Spot Cum Projection Welding Machines

and Resistance Welding Equipments

which are available in various models

like TSP 30, TSP 50, TSP 75, TSP 100,

etc. These machines are incorporated

with Weld sequence controller,

sophisticated Quartz timer, hold and off

timings with single/repeat cycle facility.

These are sourced from reliable vendors,

who fabricate them using premium

quality raw material. We offer these

machines at very economical price.

Seam Welding Machines,

which are available in

Longitudinal, Circumferential

and Universal form of Arms

and KVA ratings. These

machines find application in

diverse areas including

Automotive Fuel Tanks,

Transformer Radiators,

Silencers, Mufflers, Industrial

Filters, IC Engine Fuel Tanks

etc. Known for offering

accurate and high

productivity rate, we offer

these machines at very

reasonable rates.

Projection Welding

Sample

Stud Welding Equipment

ADVANTAGE

Uniform high welding quality Applicable to different materials No re-working necessary on the other side of the weld No additional material necessary, such as flux, inert gas rings Elimination of different operations such as drilling and riveting etc. high duty cycle Elimination of operations such as drilling and riveting The method has a higher depth of penetration compared to other stud welding processes

These machines are most commonly used in transformer manufacturing, ship building industry, structural steel industry, power plants, automobile industry etc.

Different Stud Welding Samples

S.NO Parameters Model:- CD-1000

1 Power Supply 230 V - 50 Hz - 1

2 Welding Range M3 - M8 or 3 - 8 mm with SS, Al & brass

3 Welding Method Tip Ignition

4 Standard Pistol Mechanic Positioning

5 Power Source Capacitor Battery

6 Charging Capacity 66.000 μF

7 Charging Voltage 50 - 200 V infinitely variable

8 Welding Time Up to 10 Studs / min depending on stud diameter

9 Dimensions (width x height x depth) 300 x 120 x 320 mm

CNC PLASMA/OXY CUTTING MACHINE

Fully fledged CNC controller with dedicated hardware & software for Plasma & Oxy fuel profile cutting

Open architecture controller with the latest in hardware & software to ensure compatibility & up-grading possibilities in the future

All standard industrial PC features including communication, etc.

Download part programs from CAD systems, remote host computer, pen drive, CD and DVD storage devices and via built in RS232 C / RS422 port

Punch, powder or plasma marker capability Display of actual cut path while cutting Display or real time position & I/O information Parametric parts library function with simple graphical prompts for entering all part dimensions. Built in deep process knowledge for Plasma & Oxy fuel in the form of built in Oxy fuel interface and Plasma interface. Power Source can be selected from reputed brand like Hypertherm, Kjellberg, Thermal Dynamics, Kaliburn.

Cutting Machine with Multiple Torch Machine body is made of high-strengthen aluminium ingot. Silicon controlled antenna controlling speed. High speed switch: Quite convenient. Ten torches cutting machine with two-side drive, high r u

running stability. High precision rate, surface roughness reaches. Steel plate thickness: 5-50mm. Cutting Speed: 50-750 mm/min. Input voltage : AC220V / 50 Hz Weight: 40Kg. Single & Dual Cutting Torch Model is also available.

CNC PIPE PROFILE CUTTING MACHINE

We offer our clients a wide range of CNC Pipe Profile Cutting Machines like CNC Cutting Machine, Plasma CNC Cutting Machine and Portable CNC Cutting Machine that are ideal for cutting different kinds of material including branches of the shell, two or three-layer saddle cutting the main pipe. These are highly efficient and used for several industrial processes. Equipped with latest features and technology, the machines offered by us are delivered to clients on time that too in a safer way.

Different Pipe Profile cut by CNC Pipe profile Cutting Machine

H/I BEAM PRODUCTION LINE

BOX BEAM PRODUCTION LINE

Welding Positioner Shell Rotators

Column & Boom With Flux Recovery Unit

Auto

Welding Carriage

GAS REGULATOR & GAS MANIFOLD SYSTEMS

Body Bonnet Diaphragm Gauge Safety Valve Inlet/Oulet PA Screw

Single Stage Gas Regulator

Brassed Forged

Brassed Forged

Rubber Reinforced 2” Dual Range

Set as per Delivery Pressure Reset Type

AS per IS Std. or as per Party’s Requirment

Stainless Steel Double Stage Gas

Regulator SS with Teflon-Ist Stage Rubber Reinforced-IInd Stage

2 ½” Dual Range

Preheater

Multi Cylinder Compressed Manifold (For Argon /Carbon Dioxide /Oxygen /Nitrogen / Hydrogen / Compressed Air / Helium Gas)

LIQUID FLUX BRAZING EQUIPMENT Most suited Process where high production is required to use the flux as in case

of powder flux. Since flux is automatically mixed with the gas in uniform ratio, so application of

flux in less or excess quantity is avoided. Liquid flux is non corrosive as compared to powder flux, therefore corrosion of

base metal is also avoided. No haphazard spilling of flux on the job as oxides spots in this process as the flux

is mostly consumed in the flame itself. It also protects the surroundings area of brazing seam. Minimum residue on the job which can be cleaned easily with water or cloth. There is controlled flow of the filler material, thus saving on the brazing material

It gives excellent finishing.

Applications :- This process is internationally preferred for the thin sheet metal brazing applications. It is most suitable for the

Automotive body & components / Geysers and heating elements/ Air-conditioning & Refrigeration Industry/ Bicycle frames & components/ automotive filters/ furniture& office equipments/silver brazing equipments and many more applications in brass, bronze, silver & copper component brazing.

WELDBRITE (STAINLESS STEEL PICKLING GEL) Welbrite utilizes innovative Australian Technology for the formulation of a high adhesion Stainless steel pickling gel. It is used to remove the black oxide marks or burn scale left during welding of stainless steel. After use of Welbrite the weld area should have the same look as the rest of the steel being used. Welbrite leaves a clean professionally finished stainless steel weld area Advantages of using Weldbrite:-

Is a strong AST A 380 complaint formulation. A thick high adhesion gel. Effectively removes free iron. Provides fast acting, one step de scaling. Completely water soluble. Weldbrite Pickling and cleaning of weld area and the heat affected zone Enhancement of the auto passivation Process Efficiency in fabrication. Non residual treatment.

Easy to use, even on vertical surfaces. CAL GUARD (WATER BASED ANTI SPATTER) Cal - Guard Anti Spatter is water based, paintable, cost

effective and non-inflammable agent for the prevention of weld - spatter adhering to metal surfaces during the welding process i.e. (MIG Welding & Electrode Welding)

Cal - Guard Anti-Spatter Spray has outstanding performance preventing spatter sticking to a wide range of steels, including mild steel, stainless steel and aluminum.

Cal - Guard Anti Spatter Spray avoids the need for mechanical abrasion or grinding of weld spatter following welding.

BENEFITS Non toxic, bio-gradable, Non flammable, Ozone Safe, Uniform Spray with no air bubbles, Paintable, contains no silicones, User safe.

CERAMIC BACKING TAPES Achieve X-Ray quality back beads on Root Pass Weld one side only. Deposit more weld metal. Root weld & Fill in one Pass. Eliminate defects & rework. Eliminate costly unnecessary Gouging, Grinding, Welding & Handling. Hitech Sintered ceramics - Profiles. Sizes 6mm to 150mm. Special sizes & Profile available. Especially packaged & sealed in plastic for

moisture protection. Wider heat receptive pressure sensitive foil for extra improved adhesion to work piece. Special high receptive foils are also available on request.

DPT Testing Kit A SIMPLE but Highly efficient three pack N.D.T System, Suitable for checking welds and Stressed machine parts for cracks and flaws, before and aftre welding or machining. Used By Aviation, Automotive plants, Pressure vessels, Casting & forgings, Boilers, Tubes Railways, Nuclear, Ships, Chemical Vessels, Pipe lines.

Note : All Full Frame & Short Height Curtain also available in Non-Extendable Type

Electrode Holder

CABLE CONNECTOR & MISCELLANOUS

EARth/ground Clamps

WELDING CURTAIN & FRAMES FULL FRAME EXTENDABLE PVC CURTAIN

PVC Curtains 16 mil(0.4mm) thickness Flame resistant UV resistant Abrasion resistant Available in Dark Green, Opque

Blue, Red & Yellow Colour. EXTENDABLE PVC CURTAIN SHORT HEIGHT

TABLE TOP WELDING CURTAIN

WELDING CABLE &cable Kit MAGNETIC GROUND CLAMPS

Cable size: 16mm2, 25 mm2 35 mm2, 50 mm2 70 mm2, 95 mm2

electrode ovens

EQ-450DT4

Capacity 200kg/450lbs EQ – 10Si EQ - 20SiDT Wattage 2500W Portable Type Portable Type Bench Type

r

ROTARY GROUND clAMPS

SAFETy apparels

Model Specifications Length (m)

Available

MT-15AK-AB Air-Gas Cooled 150 Amp 3,4,5

MT-25AK-AB Air-Gas Cooled 250 Amp 3,4,5

MT-24KD-AB Air-Gas Cooled 250 Amp 3,4,5

MT-30KD-AB Air-Gas Cooled 300 Amp 3,4,5

MT-36KD-AB Air-Gas Cooled 360 Amp 3,4,5

MT-50KD-AB Air-Gas Cooled 500 Amp 3,4,5

MT-501WC-AB Water Cooled 500 Amp 3,4,5

Cylinder Trolley Chipping Hammer

Auto Darkening

Helmet

MIG TORCH & SPARES

TIG TORCH & SPARES

GOUGING TORCH

MIG

TORCH

STAND