a instructions sun room- clear / sun lounge - clear...introduction sun room assembly instructions...
TRANSCRIPT
Sun Room
ASSEMBLY INSTRUCTIONS
Sun Room- Clear / Sun Lounge - Clear
74132_EN
Authorized Rion Distributors
USABackyard Living Source, Inc. - BLS149 S. Adkins Way, Suite 101Meridian, ID 83642
+208-287-6601Fax: [email protected]
Canada
AustraliaOldfields Pty Ltd8 Farrow RoadCampbelltown N.S.W. 2560
+61 2 4627 0777Fax: +61 2 4627 [email protected]://www.oldfields.com.au/treco/index.htm
GermanyCLEMENS HOBBYTEC GmbHRudolf-Diesel-Str. 8D-54516 Wittlich / Germany
+49 (0) 6571 / 929-222Fax: +49 (0) 6571 / [email protected]
KoreaDowin Polychem Co., Ltd1031-2, Banbaehomestel #209Bangbae-dong, Seocho-guSeoul, Korea
+82-2-583-8511Fax : [email protected]
South AfricaEasy Greenhouses CC8 Sherwell Avenue, Boskruin Ext 5Johannesburg, South Africa 2154Sales and Support: Linda Hill
+27 11 792 7583Mobile: +27 82 777 [email protected]
Scotland
Lomond Horticultu ral Products Ltd.The Oaks, Balfron StationGlasgow, Scotland, G63 0QN
+44(0)1360 [email protected]
Czech Republic
Lanit Plast S.R.O.Hlubocinka 809Sulice
+420 251 562 734Fax: +420 251 560 278 [email protected]
New Zealand
Bear ForestPo 404059PuhoiAuckland 1095
Mobile:
+64(0)9 889 0839+64(0)27 682 5265
Footprint Tools Canada Limited
Corporate Headquarters1745 Bonhill Road, Unit # 1Mississauga, ON L5T 1C1
905-564-60071-800-866-5749
Fax: 905-564-0059
England
Palram Applications UK
01302-380775
Unit 15 Delta Court Sky Business Park Finingley, Doncaster DN9 3GN
Two Wests & Elliott +01246 451077
Fax: +01246 [email protected]
Safety First
• Please read these Assembly Instructions completely before assembly and keep them in your records so you can refer to them if you wish to add options or make repairs.
• The instructions in this manual lead you through each step in the assembly process. It is important for you to follow them closely.
• We recommend that you use gloves during assembly.• Rion is not responsible for the misuse of tools or parts.• If local building codes require permits or licenses make sure that they are acquired before beginning.• Your Greenhouse should be secure ly anchored to the prepared foundation using the recommended hardware. • If you prepare a concrete foundation do not ex cavate and pour concrete in frozen ground. • Exercise caution when lifting heavy assemblies.• Do not attempt to assemble your Greenhouse in high winds.• We recommend that you place your Greenhouse in a spot where it will receive direct sunlight and will be
protected from the wind as much as possible. The door should not face prevailing winds.• When your Greenhouse is fully assembled examine it for sharp edges and trim with a razor knife if necessary. • Close all roof vents in high winds. • It is important to clear your Greenhouse of snow in the winter. • If you live in a hot climate, where outside temperatures exceed 46° C (115° F) in the sun or 36° C (99° F) in the
shade, this may cause the temperature inside the greenhouse to exceed 55° C (131° F). Such conditions may harm your plants and will damage the greenhouse by warping structural pro�les. In order to prevent damage:
• Ensure good ventilation during hot days. • Make sure that the temperature inside the green house never exceeds 55° C (131° F) by providing a shading
screen, such as the Shade Net (available as an accessories option).Note: Rion is not responsible for any damage due to high temperatures.
Important: Make sure that you check the contents of the greenhouse packaging against the packing list and the required parts for your model on page 4 and following. Do not begin assembly if any parts are missing.
Required ToolsBefore you start assembly have the following available:• Power drill• Measuring tape• Level• Scissors• Gloves• Awl• Razor knife• Sponge and soapy water
Note: You may �nd some parts easier to assemble if you �rst moisten them with soapy water.
AccessoriesRion o�ers a wide range of accessories for your greenhouse from modular bases for the foundation, automatic window openers, and shelving for your plants.
Sun Room Assembly Instructions 1
Introduction
Sun Room Assembly Instructions
Connect the speci�ed parts.Match the holes in the pro�les and the connectors. Place a pin on the pin tool and push the pin through the lined-up holes to lock the parts in place. Many connections require pins on both sides.
Note: Extra pins are included.
If you wish to disassemble the parts at any time, remove the pins using the pin tool. Place the end into the exposed hole and lever the pin out.
If a hole in the connector is missing, drill a hole with a 6 mm(¼") drill bit through the assembled pro�le and then insert the pin.
In extremely rare cases connectors will not slip into some round or oval pro�les. In this case place the a�ected part into10 cm (4”) of boiling water for 15 seconds before connecting.
Important: In order to maintain the life of your greenhouse, it is essential to insert glazing elements fully and completely.
Moisten the glazing element with soapy water.
Insert one end of the glazing element into the pro�le until it snaps into place.
Push the glazing element along its length.
Continue until the end of the glazing element snaps in place.The callout ( ) shows an enlarged cross-section of the pro�leand glazing element when it is seated correctly
Congratulations on purchasing an Sun Room/Sun Lounge. We are certain that it will give you many happy years of pleasure in your garden. Sun Room/Sun Lounge has been designed to be as easy to put together as it is beautiful to look at. Most of the work can be done by a single person. Only attaching the roof requires the help of a family member or neighbor for a short while. Easy assembly methods eliminate the need for tools or special expertise.
Greenhouse assembly is done in the following steps:Prepare a Foundation for Your Sun Room/Sun Lounge --------- 3Identify Greenhouse Parts ----------------------------------------------- 4Prepare Your Parts for Assembly --------------------------------------- 7Lay Out the Greenhouse Frame ---------------------------------------- 7Secure the Frame to Foundation --------------------------------------- 8Assemble the Roof Pediments ------------------------------------------ 9Assemble Roof Framework ---------------------------------------------- 11Preper the Greenhouse Roof -------------------------------------------- 12Raise the Sun Room/Sun Lounge Roof ------------------------------- 13Secure Sun Room/Sun Lounge to the Wall-------------------------- 15Cover the Roof -------------------------------------------------------------- 16Seal Panels ------------------------------------------------------------------- 19Assemble the Door -------------------------------------------------------- 20Seal The Door --------------------------------------------------------------- 21Attach The Door (Left Entrance Option) ----------------------------- 22Attach The Door (Right Entrance Option)---------------------------- 23Attach Door Holder -------------------------------------------------------- 24Final Touches ---------------------------------------------------------------- 25
2