a reliable brand manufacturer of dental materials have been continuously researching materi-als in...
TRANSCRIPT
A Reliable Brand Manufacturer of Dental Materials
YAMAMOTOA manufacturer of
Dental Porcelain-fused-to-Metal,Composite Resin for Crowns and Bridges And Precious Alloys for Dental Use
In order to develop new products, it is essential to
integrate various research fields. Our material
development is not limited to a single f ield such
as metallurgy for dentistry, organic chemis-
try and inorganic chemistry; rather, we
integrate these f ields with medical
studies and biology. Finding out
new possibilities and new
material characteristics is
a signif icant research
theme for us.
YAMAMOTOS INCE 1957
Kochi Factory
Clean room / Air ShowerKochi Factory
Other25.7%
E1.9%
D3.3% C
12.3% B17.6%
A18.2%
YAMAMOTO 21.1% Manufacturer's Market Share
of Dental Alloys in 2010
Data adapted from 2012 Almanac of Dental Devices & Equipment.
その他6.0%F社
5.7%E社5.8%
D社6.9%
C社9.9%
B社12.2% A社
13.4%
2010年度82.12億円
当社40.1%
Precious Dental Alloys for Porcelain Fused-to-Metal (Shipping Amount)
1957
1976
2001
2003
2006
2008
2010
2011
Shigetoshi Yamamoto founded Yamamoto Store and started
to buy, sell, produce and refine precious ground metals
Acquisition of the license for manufacture and sale of
precious dental alloys
Release of ZEO CE LIGHT, metal bond ceramics for dental
use
Obtained ISO 9001 and ISO 13485 certif ication
Obtained CE marking certif ication and released ZEO CE
LIGHT in Europe
Released ZEOQUICK, second PFM brand
Released Luna-Wing, Light Cured Indirect Composite Resin
Luna-Wing awarded 22nd Kochi Prefecture Regional Industry
Award
Release of TWiNY, Light & Heat Cured Indirect Composite
Resin.
TWiNY awarded Shikoku Bureau of Economy, Trade &
Industry Regional Industry Award
Evaluation of dental material safety is designated by the Pharma-
ceutical Af fairs Law in Japan and ISO 10993 overseas.
We fully comply with these regulations and standards. In addition,
in order to secure a higher level of safety, we set up the Biological
Science Safety Laboratory in collaboration with the Department of
Oral and Maxillofacial Surgery, Kochi Medical School, Kochi
University, Japan. We have been continuously researching materi-
als in collaboration with other medical and dental colleges and
research institutes.
History
Yamamoto Precious Metal Co., Ltd.Founded : May 1, 1957Capi ta l : 50 million yenS a l e s : 24,475,000,000 yen as of June, 2011.
Business:
1. Manufacturing Dental Porcelain fused to Metal and Indirect Composite
Resin
2. Producing precious alloys for dental use (largest market share in Japan)
3. R&D for precious metals and other materials for dental use
4. Ref inement and analysis of precious metals
5. Processing of precious ground metals
6. Buying and selling of gold, platinum, silver, palladium and other precious
metals
Head Of f ice: 3-7 Sanadayama-cho, Tennoji-ku, Osaka 543-0015, Japan
Branch Of f ice: Tokyo, Osaka, Sendai, Nagoya, Fukuoka (Japan)
Factory and R&D : Kochi, Japan
Website: http://www.yamakin-gold.co.jp
Email: [email protected]
Profile
For a well-grounded safety system
There are two factory sites with ten buildings, and the total
factory area is 30,460m2.
From research and development to production, Yamamoto has
established a consolidated management system. Especially, resin
products are manufactured under strict hygienic control so as to
avoid any dust contamination.
Strict Hygienic Control
Results
Sales Amount
(million JPY)
02000400060008000100001200014000160001800020000220002400026000
2009
2010
20112008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
Sales Amount
Domestic Shares of Luna Wing Sales
(million JPY)
200820072006 2009 20100
100
150
200
250
300
350
11.2%
8.0%
5.1%
12.6% 13.3%
Luna-Wing
Thank You!
Quality Management System for Global Standard Compliance
We were audited and approved by the designated third
party TÜV SÜD, Germany, in order to obtain ISO 9001 and
ISO 13485 (Quality Management System of Medical Devices)
certif ication. We have realized an advanced high-level
quality management system as a manufacturer of Controlled
Medical Devices.
Regarding safety information from the production manage-
ment stage through to safety management post-marketing
surveillance:
In order to judge quality standards objectively, we set up an
independent sales monitoring system, under a marketing
supervisor-general. We have assigned a quality assurance
manager to the system, who is responsible for Good Quality
Practice; and we have also assigned a safety management
supervisor, who is responsible for Good Vigilance Practice.
We monitor all information reported to us from clinical prac-
tices.
Monitoring of Safety Information
INTERNATIONAL20120310
http://www.yamakin-gold.co.jp
Head Of f ice: 3-7 Sanadayama-cho Tennoji-ku Osaka 543-0015, JapanBranch Of f ice: Tokyo, Osaka, Sendai, Nagoya, Fukuoka, JAPAN Factory and R&D: Kochi, JAPANP: +81-6-6761-8338 F: +81-6-6761-0610E: [email protected]
Yamamoto Precious Metal Co., Ltd.