a1 size 841×594 eng gcv135/gcv160 - power€¦ · gcv135/gcv160 © honda motor co ... spark plug...
TRANSCRIPT
GCV135/GCV160
© Honda Motor Co., Ltd. Power Product Service Division. Spark plug gap 0.7–0.8mm(0.028–0.031 in)
LIQUID GASKET
VALVE CLEARANCE
IGNITION COIL AIR GAP
PISTON ASSEMBLY CARBURETOR DISASSEMBLY/REASSEMBLY CARBURETOR REMOVAL /INSTALLATION
ENGINE OIL
AIR CLEANER
SPARK PLUG
52N‧m(5.3kgf‧m,38lbf‧ft)
12N‧m(1.2kgf‧m,9lbf‧ft)
12N‧m(1.2kgf‧m,9lbf‧ft)
GOVERNOR
PISTON DISASSEMBLY/REASSEMBLY
Liquid gasket
European model, with fly-wheel brake
Maximum speed (no load)
3,100±150min-1 (rpm)
Except for European model,with flywheel brakeExcept for European model,without flywheel brake
3,000 min-1 (rpm)+0-100
Standard valveclearance
0.15±0.04mm (0.006±0.002 in)
To increase valve clearance, screw out.To decrease valve clearance, screw in.
VALVE STEM
VALVEADJUSTINGLOCK NUT
VALVEADJUSTINGSCREW
0.20±0.04mm (0.008±0.002 in)INEX
• Install with the maker mark facing upward as shown.• Stagger the piston ring end gaps 120° apart. Do not align with the piston pin.
OIL DIPPERPROJECTIONS
WIRE BRUSH
Wipe dirt from the inside of the air cleaner cover and air cleaner case, using a moist rag. Be careful to prevent dirt from entering the air duct that leads to the carburetor.
0.55ℓ (0.58 US qt, 0.48 lmp qt)Engine oil capacity
–5℃– 40℃(23°F ‒ 104°F)
Recommended operatingambient temperature
AMBIENT TEMPERATURE
10W20W
20W.40.20W.50
15W.40.15W.50
10W.40
10W.30
-30 -20 -10 0 10 20 30 40℃
-20 0 20 40 60 80 100℉
MultiViscosity
SingleViscosity 20
3040
Apply the stick [ø1.5 – 2.0mm(ø0.06 – 0.08 in)] of the liquid packing (Three Bond 1207 or equivalent) to the cylinder barrel; specifically, to the mating surface with the oil pan.
LIQUID PACKINGAPPLICATIONAREA
CYLINDERBARRELIGNITION COIL
0.2 – 0.6 mm(0.008 – 0.024 in)
0.2 – 0.6 mm(0.008 – 0.024 in)
0.2 – 0.6mm (0.008 – 0.024 in)Specified clearance
A1 SIZE 841×594 ENG