aaff manual whinck led, led 3d, allroad eng€¦ · maintenance and warranty 3. getting started 5...

13
User Manual WHINCK Hoverboard LED 3D 6.5” ALL ROAD 3D LED 8.5” flashing wheels C M Y CM MY CY CMY K AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 1 19/7/19 11:32

Upload: others

Post on 01-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

User ManualWHINCK Hoverboard

LED 3D 6.5”ALL ROAD 3D LED 8.5”

flashing wheels

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 1 19/7/19 11:32

Page 2: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

2ENGLISH

Table of Content

1. Introduction 3

2. Safety 32.1 WARNING2.2 RISK OF INJURY 2.3 Attention!

3. Getting Started 53.1 Reference Diagram3.2 Charging the Battery 3.3 Working and Charging Temperature 3.4 Weight Limitations 3.5 Battery Level 3.6 Bluetooth & APP 3.7 Specification and Function

4. Riding Guide 10 4.1 Preparation 4.2 Steps to Riding4.3 Terrain and Reminders

5. Maintenance and Warranty 11 5.1 Storage 5.2. Repairs5.3 Warranty

6.Caution 12

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 2 19/7/19 11:32

Page 3: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

3ENGLISH

1. IntroductionCongratulations on your purchase of a Whinck Hoverboard! Designed for stylish transportation, this compact hoverboard celebrates personal and intuitive mobility. Whinck hoverboards are fun and easy to ride. Experience cutting edge technology as you glide effortlessly along on your way to your destination.

This manual is intended to help you setup & maintain your hoverboard in safe riding conditions. It is important to practice safety standards written in this User Manual for safe riding of your hoverboard. When finished reading, please safekeep this manual for future readings and instructions for all service requests.

The Package Contains: • 1 Hoverboard Unit • 1 User manual • 1 Battery charger and power cable

2. Safety

2.1 WARNING Whenever you ride the vehicle you risk serious injury or death from collisions, falls or loss of control. To ride safely, YOU MUST READ AND FOLLOW ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL.This manual includes basic operational instructions for the vehicle. It cannot cover all situations where injury or death may occur.OPERATORS MUST USE GOOD JUDGMENT AND COMMON SENSE TODETECT AND AVOID HAZARDS AND DANGERS that they may encounter when riding the vehicle. The vehicle operator must use the vehicle according to the local given traffic law and are not allowed to drive under alcohol, drug or medication treatment By using the vehicle, you accept of the inherent risks of operating this product.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 3 19/7/19 11:32

Page 4: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

4ENGLISH

2.2 RISK OF INJURYWhenever you ride the vehicle, you risk injury from loss of control, collisions and falls. It is your responsibility to learn how to safely ride the vehicle in order to reduce the risks of riding.This manual is designed to help you learn safe riding techniques.NO ONE SHOULD USE THE VEHICLE UNLESS THEY HAVE READ THROUGH THE MANUAL.Review all the material frequently to help remind you of proper riding techniques and safely procedures.

2.3 Attention!There are risks to riding or driving every vehicle. This one is no exception. Remember when you learned to ride a bike? You probably started in a safe location without traffic and had somebody help you learn, especially to stand on the vehicle. You started slowly. This technique applies to ours as well. If you carefully follow all the instructions and warnings in this manual, you should be able to teach yourself to ride. Avoid to use the vehicle if you are feel tired, sleepy or you have an unstable health condition.

1. Always check the battery charge before using. Do not ride when its battery is low, as indicated by a twinkling green light or a solid red light. This may stop operating and cause you to fall.2. Check local laws and regulations to see where and how you may use vehicle legally. Follow all applicable laws for vehicles and pedestrians.3. Avoid obstacles and slippery surfaces, which could result in a loss of balance or traction and cause a fall.4. Do not exceed the maximum weight of 220 pounds (100 kilograms) – including backpacks and other items that might be carried. Exceeding the weight limit could injure the rider and damage it.5. The vehicle shall not be used by small children. Parents shall judge if the children has the required coordination, ability and judgement to use the vehicle properly.6. Do not lift it off the ground when it is turned on. Do not turn on in mid-air. This will cause the wheels to spin freely, which could result in injury to yourself or damage to things around you.7. Do not modify it. Modifications could interfere with operating and could result in serious injury and/or damage. Modifications void its Limited Warranty.8. Since balances by accelerating in response to your leaning forward, if you lean too far forward, the motor will not be able to catch up with you and you may fall. When you reach maximum speed, it will tilt backward. DO NOT attempt to accelerate further or you will fall.9. Never operate any vehicle, including this one, while under the influence of drugs or alcohol.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 4 19/7/19 11:32

Page 5: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

5ENGLISH

3. Getting Started

3.1 Reference Diagram

3.2 Charging the BatteryYour hoverboard comes with a built-in lithium-ion battery pack. Before your first ride, you must fully charge the battery. Be sure to charge the battery in a clean, dry location. Plug one end of the power cord into it. Plug the other end into a grounded AC outlet. The red charging light on the charger unit will turn on. The charger may take up to 1.5 hours to complete its charge. The red light on the charger will turn green once it is finished.

3.3 Working and Charging TemperatureIf you want the hoverboard in good operational efficiency, the battery temperature must be controlled among the range of specification.Temperature before charging and charging process must be within the recommended values. Close to the recommended temperature, the charging efficiency is the highest, if it is too cold or hot, the charging time will be longer, or not fully charged. Working Temperature: -20°C - 65°C, Charging Temperature: 0°C - 40.

PlatformBumper

Motor

Wheel

ON/OFF Switch

LED Lamp

Charging PortStereo BluetoothSpeakerLED Lamp

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 5 19/7/19 11:32

Page 6: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

6ENGLISH

3.4 Weight LimitationsIn order to guarantee your children’s safety, everyone who drives must be over 15kg in weight. If the driver’s weight is lower than 15kg, it would shake automatically until he/she steps down. Do not exceed the maximum weight that will be different depending on your Whinck model (confirm maximum weight on technical specifications) – including backpacks and other items that might be carried.

3.5 Battery LevelA LED indicator is used to indicate battery level. When the light is green, it means the unit has enough power. When the light turns red, you should charge it as soon as possible. Please check power level before usage to ensure there is enough power for the return trip. You may want to charge it every time after use.

When power level is lower than 15%, the LED indicator will flicker and the buzzer will sound on.Sustained range will decrease during winter, because the battery performance decreases quickly in cold conditions. In -15c, for example, battery performance is only about half in comparison to that in room temperature.

WARNING: It will notify you when the battery charge is dangerously low by slowing down and shaking the wheels when you are riding it. If these warnings occur, immediately slow down and safely step off. Turn the unit off. Do not attempt to ride again until the battery is recharged.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 6 19/7/19 11:32

Page 7: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

7ENGLISH

3.6 Bluetooth & APP1. You can scan the QR code and download the Whinck APP for your IOS device or Andriod in your APP store. Mobile device requirement: Android 4.3 or higher,IOS 8.3 or higher.

2. After download, turn on the APP and Bluetooth on your mobile device you need to Login with name "Whinck" before use in first time. 3. Select your model of Whicnk Hoverboard ( LED 6.5 / 3D LED 6.5” or ALL ROAD 3D LED 8.5) in APP to connect the device and APP.

APP Function

• Power on/off • RGB light adjustment• Speed limits • Light frequency• Battery status • Self-balance turn on/off• Language settings • Common mode/Child mode)

Android iPhone

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 7 19/7/19 11:32

Page 8: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

8ENGLISH

3.7.1 Manual Switching between standard mode and self-balance mode1. Place the Hoverboard on a flat level surface.2. SWITCH ON the power.3. Keep the left and right pedals level and aligned.4. Push and hold the power switch on for about 5 seconds until the signal light flash and the alarm sounds.5. After a few seconds of switching mode, the signal light and alarm will stop.6. Switch off the power switch and the switching mode process is complete

You can also switch the self-balance node from the APPs

Whinck 3d LED 6.5" Whinck All Road 3D Led 8.5Motor Power 250W*2 300W*2Battery Capacity 25.2V/3.6Ah 25.2V/4AhMaximum Speed 12km/h 15km/hMaximum Load 120kg 120kgDistance per charge 8-12km 8-12kmMax. Climbing angle 15º 15ºCharging time 3-4H 3-4H Age range 8-50 8-50Working temperature -10~40°C -10~40°CStorage temperature -20~45°C -20~45°CDimensions 616.5*205.3*178mm 661.8*214*241mmNet Wieght 7.8kg 12.5kg

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 8 19/7/19 11:32

Page 9: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

9ENGLISH

3.7.2 Switching between Children mode and Adult mode1. Put the Hoverboard up stand by one wheel.2. SWITCH ON the power.3. Push and hold the power switch on for about 5 seconds until the signal light flash and the alarm sounds.4. After a few seconds of switching mode, the signal light and alarm will stop.5. Switch off the power switch and the switching mode process is complete

You can also switch the self-balanc node from the APPs

NOTE: Select the mode that you are more capable and feel comfortable to manage it.

Warning: Never lift the hoverboard off the floor when the power is on.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 9 19/7/19 11:32

Page 10: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

10ENGLISH

4. How to ride

4.1 First RideWhen you want to start your first ride, please try to wear comfortable casual or sports outfit, wear flat shoes and in addition we strongly suggest you to wear protection equipment such as helmet and knee protection. Please bring it to a more spacious place, and ensure that there is no any significant obstacles.

4.2 Steps to Riding1. Set it on the ground and turn the power on. It can face either direction. The green light on the top of the unit will light up. Put your dominant foot on the platform, next to the wheel. Use your foot to level the platform and activate the balancing system. The balancing system will not active until the platform is level.2. With one foot on one platform stand up straight. Place your other foot on the other end of the platform.3. Shift your body weight gradually forward to pick up speed. Do not lunge forward.4. Shift your body weight backward to slow down or stop. If you continue to lean back, you will be able to travel backward.5. To turn left, slightly tilt your right foot forward. To turn right, slightly tilt your left foot forward.6. To rotate on the one spot, slightly tilt one foot forward and the other foot backward.7. When you are ready to get off, slow down, stop and step off with one foot first, then the other. Turn it off. If you do not turn it off, it will stay on for 5 minutes allowing you to step on and go again without engaging the on/off switch. It will shut off automatically after 5 minutes.REMEMBER: Do not lift it off the ground when it is turned on. Do not turn on it in mid-air.IMPORTANT: The top speed is 15 km/h (9mph). When you approach the maximum speed, it will try to prevent you from accelerating further. It will tilt back in order to shift your weight backward. You may feel that you are being 'pushed' back or that you cannot make it go any faster. Do not continue leaning or bending forward to try and increase your speed or you will fall.

4.3 Terrain and Reminders1. It is intended for indoors or use on smooth, flat surfaces. However, to prevent loss of traction, you must always be careful when riding and learn to identify and avoid slippery and wet surfaces, loose materials, slopes, potholes and other obstacles.2. The wheels must be able to grip the ground for you to stay upright. Slips occur when the wheels lose traction, potentially causing loss of control and a fall. Abrupt maneuvers and riding over slippery surfaces, bumps, and loose objects and materials, may cause it to lose traction.3. Driving on rainy and snowy days is strictly forbidden under our riding guide.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 10 19/7/19 11:32

Page 11: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

11ENGLISH

5. Maintenance and Warranty

5.1 StoragePlease store it in a dry place. If left unused, recharge the battery every two months to maintain longevity of the battery.

5.2. RepairsUnits can only be repaired with original spare parts from licensed supplier or seller. Open up, dissemble or modification on the vehicle with none-licensed or none original part will invalid the units warranty.

5.3 WarrantyPlease register your unit’s proof of purchase at our website for expedited claim reviewal or safe keep the proof of purchase (i.e., receipt) to validate your limited warranty claims.

Limited Warranty: • 2 year for vehicle, except battery and other consumables. • 6 months for battery.

The warranty will be invalid under the following conditions: • Service / Opening of vehicle by an unauthorized party • Receipt is not in accordance with the vehicle • Failure to provide legible proof of purchase • Inappropriate handling/use/maintenance of the vehicle • Non-compliance with the points from the manual

Following damage will be not covered by the warranty: • Damage on vehicle by inappropriate handling or use • Damage on vehicle by inappropriate modification or repairs. • Damage on vehicle by inappropriate storage • Damage on vehicle cause by accident • Vehicle Surface damages • Vehicle damage or malfunction caused by rides in the rain or soaking in water.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 11 19/7/19 11:32

Page 12: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

12ENGLISH

6. Caution• This hoverboard can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the hoverboard in a safe way and understand the hazards involved.• Children shall not play with the unit.• Cleaning and user maintenance shall not be made by children without supervision.• The unit is only to be charged with the power supply unit provided with the unit.• Do not charge overnight or when you are not able to observe the board.• Charge and store in an open dry area away from combustibles (meaning items that can catch fire).• Do not charge directly after riding. Let the device cool for an hour before charging.• If giving to someone as gift, leave it in its partially charged state. Do not take it out of the package to bring it to a full charge and then wrap it back up. Often, the product comes partially charged. Leave it in that state until it is ready to be used.• Do not ride near vehicular traffic.• It is important to wear safety gear when using this device such as:A skateboard helmet, knee, elbow pads and wrist guards for protection from falls.

The instructions shall state the substance of the following

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

The Self Balance Scooter is only to be used with the unit provided

The instructions for appliances having a part of class � construction supplied from a detachable power supply unit shall that the appliance is only to be used with the power supply unit provided with the appliance.

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 12 19/7/19 11:32

Page 13: AAFF Manual Whinck LED, LED 3D, Allroad ENG€¦ · Maintenance and Warranty 3. Getting Started 5 3.1 Reference Diagram 3.2 Charging the Battery 3.3 Working and Charging Temperature

13ENGLISH

Instructions for appliances containing non user-replaceable batteries shall state the substance of the following:This appliance contains batteries that are only replaceable by skilled persons.This appliance contains batteries that are non-replaceable.

For appliances intending to be supplied from a detachable unit for the purposes of recharging the battery, the type reference of the detachable supply unit shall be stated along with the following: IEC 60335-1:2010+AMD1:2013+AMD2:2016 CSV © IEC 2016

WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

Please scan a following code for your mobile device. Enhanced features available thru App. (App is continuously updated, please keep up to date).

After download, You need to Login with name "Whinck" before use in first time.

Android iPhone

C

M

Y

CM

MY

CY

CMY

K

AAFF Manual Whinck LED, LED 3D, Allroad_ENG.pdf 13 19/7/19 11:32