aas instruments parts illustrated

Agilent Technologies

AA 140/ AA 240/AA 280

Illustrated Parts Breakdown

Notices

© Agilent Technologies, Inc. 2012

No part of this manual may be reproduced in

any form or by any means (including electronic

storage and retrieval or translation into a

foreign language) without prior agreement and

written consent from Agilent Technologies,

Inc. as governed by United States and

international copyright laws.

Manual Part Number

IPB_AAS_instruments_A.01.01

Edition

Revision A.01.01

Agilent Technologies, Inc.

Warranty

The information contained in this document is

subject to change without notice. Agilent

Technologies makes no warranty of any kind to

this material, including but not limited to, the

implied warranties or merchantability and

fitness for a particular purpose. Agilent

Technologies shall not be liable for errors

contained herein or for incidental or

consequential damages in connection with the

furnishing, performance, or use of this

material.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accordance

with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or

subcontract, Software is delivered and licensed

as “Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995), or

as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer software”

as defined in FAR 52.227-19 (June 1987) or any

equivalent agency regulation or contract

clause. Use, duplication or disclosure of

Software is subject to Agilent Technologies’

standard commercial license terms, and non-

DOD Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR 52.227-

19(c)(1-2) (June 1987). U.S. Government users

will receive no greater than Limited Rights as

defined in FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b) (2) (November 1995), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

personal injury or death. Do not

proceed beyond a WARNING notice

until the indicated conditions are

fully understood and met.

CAUTION

WARNING

Contents

IPB – Agilent AA 140 / AA 240 / AA 280 of 28

Contents

1 Revision History

2 Mechanical parts

3 Electrical/Electronics

4 Optics

5 Gas / Gasbox

6 Software

7 Tools/Standards

8 Other parts / not mentioned in this IPB

9 Attachments/Supporting Documents

Revision History


1 Revision History

Revision: A.01.01

Date: July 2012

Changes: Initial Release

General


2 General

General

Item Description Part Number

1 Assy Front door, ( incl. window door shield, handle, grille, shield) 110735190

Assy Front door, Flame Shield, spare (- incl. window door shield, handle, grille, shield) 110628090

2 Flame shield window only 2010057390

3 Assy chimney AA140 /240 /280 110780400

4 Spray chamber Mark 7 complete 110634490

5 Tray, drip AA 6610017500

6 IEEE cable, 2m 5910043800

7 PCI GPIB Card National Instruments 9910102100

8 USB GPIB Controller National Instruments 7910051600

9 3m A-B USB 2.0 Cable 8121-0905

1

3

4

5

2


Covers


1 Kit Paint Covers AA for AA 240, include Item 3-5 9810023600

2 Kit Paint Covers AA for AA 50/55, include Item 3-6 9810023500

3 Cover Left hand side / LHS 110619290

4 Cover infill 910109990

5 Cover top right hand side / RHS 910110090

6 Cover lower 910109690

7 Assy Front Door, 4 Lamp FS Model 110635100

8 Handle - Moulded - Sample Compartment Door 2510025900

3

2

6

1

7

8

7

Electrical/Electronics


3 Electrical/Electronics

PWB / Boards


1 Assy PWB mono spare 1/3 m for AA 280 FS / AA 280 Z 210177790

2 Assy PWB mono LCAA for AA 50 / AA 55 / AA 110 / AA220 / AA 220 FS / AA 240 210150190

3 Assy PWB control AA 210177590

4 Assy PWB PMT Interface AA 210150390

5 Assy PWB Opto Chopper, without opto sensor 210152990

6 Assy Zeeman Magnet control PWB 210107590

7 Assy PWB Pump Control / Processor , SIPS PWB 210144090

8 Flame Detector 210096590

4

6

3

7

1 5

8

7

Electrical/Electronics


Electronics


1 Assy Corcom

- incl. Varistor, voltage selector

110616400

2 Transformer 15 VA SACAUL 5310020200

3 KIT, AA Power Supply ATX

(replace old VARIAN AA DC Power Supply AT pn 110621790, you have to order additional loom pn.

9910138500 when upgrading from old AT to new ATX DC Power Supply)

9910138400

4 Varistor Mo 275vac 0.6/71joules - Mains Input 1410131100

5 Fuse 2.5 amp Time Lag/High Break/M205 1910009500

1

4

2

2

3

Optics


4 Optics

Optics


1 PMT, Photomultiplier Tube R 1516, 185-650 nm, standard 5610132600

2 PMT, Photomultiplier Tube R 446, 185-900 nm, wide range 5610013400

3 PMT, Photomultiplier Tube R955, 160-900 nm, high performance (Zeeman) 5610024100

4 Assy Chopper motor

include. chopper motor, chopper mirror, chopper mount, loom refl. opto sensor

110617990

5 Assy loom reflective opto sensor 110781500

6 Assy PWB mono 210177790

7 Assy monochromator AA 240 FS spare, without PMT 110772890

8 Micrometer DIA 8 LAPPED AND LUBED 7910034000

9 Assy Micrometer Spare CW HUB and PAD 110633800

10 Assy Collimator, include 2 collimator mirrors + bracket /holder 110595190

11 Assy Chopper Mirror Include in Item 4

7

1-3

4

5

6

10

11

Optics


Optics / Mirrors


1 ZEEMAN POLARIZER 110481090

2 Assy Grating 110594590

3 Assy Slits/Motor 110595790

4 Assy Beamsplitter - Double Beam 110599390

Assy Beamsplitter - Single Beam 110599790

5 Assy M6 Flat, Mirror 110599590

6 Assy M7 Flat, Mirror 110598590

7 Assy M8 Toric, Mirror 110599490


2

1

3

3 2

4

2

5

6

7

8

Optics


Monochromator


1 Assy monochromator AA 280, 1/3m

Incl. ribbon cable, Assy PWB Mono, motor, Assy slits

110727490

2 Assy monochromator AA 240 FS , 1/4m

Incl. ribbon cable, Assy PWB Mono, motor, Assy slits

110772890

3 BUSH CLAMP Included in Item 2

4 BUSH MICROMETER Included in Item 2

5 BUSH DRIVE Included in Item 2

6 FLAT RIBBON CABLE MONO I/FACE 20 WAY SOCKET, 1620mm 110615000

2

1

3

4

5

Optics


Micrometer


1 ASSY MICROMETER SPARE CW HUB and PAD for AA 50/55/110/220

Include Item 3-8

110633800

2 Assy micrometer and HUB, for AA240

(include bush clamp, bush drive, bush micrometer, diaphram)

Include Item 3, 5,9

110746690

3 MICROMETER DIA 8 LAPPED & LUBED

(used in AA 50/55/110/220/240),

7910034000

4 Spring Tension 4610031300

5 MICROMETER SCREW MITOTOYO 7910007400

6 HUB DRIVE - WL DRIVE 14.25 DEGREES 5410037400

7 BRACKET MICROMETER SHAFT Included in Item 3

8 WASHER FELT 6IDX1,6THICK 1510227100

9 SPRING COMPRESSION 10,2OD Included in Item 2

10 Assy Mono spare 110595890

10

3

4

5

6

7

8

3

9

Optics


Lamp select


1 Assy Auto lamp select, include Item 2 to Item 7 110598790

2 ASSY LOOM LAMP SELECT MOTOR 110612990

Included in Item 1

3 BEARING BALL 6 DIA 310031100

Included in Item 1

4 MOTOR STEPPER/12V/1.8DEG/PLUG CNCTR 3010010200

Included in Item 1

5 ASSY Mirror M5 2-8 lamps Included in Item 1

6 Stop motor mirror M5 2-8 lamps Included in Item 1

7 Bracket Support motor mirror M5 Included in Item 1

8 Assy Manual Lamp Select 110598690

1

1

4

2

5

7


HC Lamp


1 Assy Loom HC Lamp, include Item 3-5 110613890

2 Assy Loom HC UltrAA Lamp, include Item 3-5 for UltrAA Lamps 110729800

3 CLAMP FINGER WHITE TAMPCO 810013500

4 Spring CLAMP Included in Item 1

5 CNCTR OCTAL ADP - HCL LOOM 1210009200

6 MOULDING OCTAL SOCKET COVER Included in Item 1

7 Assy Loom UltrAA Lamp (Field Fitted, for Upgrade) 110613990

8 CNCTR. OCTAL ADP Included in Item 1

8

1

3

4

1

5

1

3

4

1

5

6

Gas / Gasbox


5 Gas / Gasbox

Gas / Gasbox


1 Assy burner Mark 7 air / acetylene 210164000

2 Assy burner Mark 7 nitrous oxide / acetylene 210164100

3 Valve SOLENOID 1Q3M 12V DC tested 5710011890

4 ASSY FLOW CONTROL VALVE LCAA 110613790

5 VALVE SOLENOID (FERRULE ONLY 12VDC) tested – Inlet Mainfold 5710008490

6 ASSY RESERVOIR 110624190

7 Switch pressure 31 PSI 4810029490

8 PRESSURE REGULATOR FUEL 5710011100

9 PRESSURE REGULATOR OXIDANT 5710011200

3

5

5

5

6

7

8

9

4

Gas / Gasbox


Gasbox


1 Assy LCAA PGCU, whole gasbox, incl Item 3 110604790

2 Assy LCAA AGCU/MGCU, whole gasbox, incl Item 4 110604690

3 Assy Burner Adjuster Plain (PGCU) 110607890

4 Assy Burner Adjuster With Flow Tubes (AGCU) 110607790

5 Assy Manifold Gas Input (PGCU)

incl. pressure regulator fuel, pressure regulator oxidant, 3x valve solenoids, fittings, filter, alu bar

110624090

6 Kit, AGCU to PGCU upgrade 9910092800

7 VALVE SOLENOID NORMALLY OPEN 12V – only for AGCU 5710011900

1

5

2

3

4

7

Gas / Gasbox


Burner Adjuster


1 Assy Loom Interlocks Burner Adjuster 110618490

2 Assy REED switch 110632490

3 SW MICROPLUNGERSILVER CONTACTS0.5N 4810023300

4 Switch push-butt mtry. SP CO 0.1 amp 4810035600

5 Assy Burner Adjuster with Flow Tubes for AGCU / MGCU 110607790

6 Assy Burner Adjuster with Flow Tubes for AGCU / MGCU for AA240 110773190

7 Seal, Flow Tube 6910014500

8 Shaft Vertical 4110051900

9 Knob, Black Horizontal 4110052200

10 Assy 18T Gear Mount Vert 110619990

11 Gear 36T Vert Nylon Bevel 5410039200

12 Shaft Horizontal 4110052000

13 Bracket, Channel Sliding 410302400

14 KNOB 22,5 DIA GRUB SCREW BLACK 2510032300

15 Assy Loom Burner I/Locks + ABA 110767090

1

2

2

3

4

4

9 4

8

10

11

14

14

15

Gas / Gasbox


Igniter


1 Assy Igniter 1,5 VDC + Filters(Item 10), incl housing 110622990

2 Assy Wire Igniter-Earth 110621390

3 VALVE SOLENOID 1Q3M 12V DC tested 5710011890

4 Assy Igniter Nozzle 110630190

5 CAPILLARY IGNITER 145MM Included in Item 4

6 Assy Igniter Electrode Assy , incl. cable 7910026700

7 SW PUSHBUTTON/MOMENTARY/2AMP/250VAC/RED 4810029900

8 SW PUSHBUTTON/MOMENTARY/2AMP/250VAC/BLACK 4810030600

9 SWITCH ROCKER DPDT OI VERT 250V 16(4)A 4810033500

10 EMI FILTER FEED-THRU 10A MURATA-ERIE 1210079400

1

2

3

4

5

6

7

8

9

10

Gas / Gasbox


Gas / Gasbox


1 HOSE RED ACETYLENE – C2H2 110236890

2 HOSE BLACK AIR 110237190

3 HOSE BLUE NITROUS OXIDE - N2O 110236590

4 Assy Flow Control Valve LCAA 110613790

5 VALVE SOLENOID (FERRULE ONLY 12VDC) tested – Inlet Mainfold 5710008490

6 Assy Loom Gas Box 110612790

1

2

3

4

5

5

5

4

6

Gas / Gasbox


Assy Spray Chamber Mk 7, complete


1 Assy Spray Chamber Mk 7, complete,incl. O-Rings(Nitrile), include Item 2-22 110634490

2 Screw Mounting, Spraychamber 1510226600

3 Moulding Spraychamber, fluorinated 6210092090

4 Kit, mixing paddles, Mk 7, 5x paddles 9910093600

5 Pressure relief bung, fluorinated, without o-ring 1610118800

6 Tube Drain, fluorinated 3710042900

7 Kit, Liquid Trap, Float And Magnet, fluorinated, include Item 8+ 9 9910105800

8 Magnet, coated, for liquid trap float Included in Item 7

9 Float Included in Item 7

10 Mark 7 spray chamber, nebulizer kit, include Item 6, 11, 12 9910093100

11 HOUSING NEBULISER FLUORINATION Included in Item 10

12 SCREW IMPACT BEAD ADJUSTER – Grey PEEK 1510225000

13 Clamp Bead Adjuster 810133400

14 GUIDE CAPPILARY NEBULISER, without o-ring 810134400

15 Venturi Nebulizer Included in Item 1

16 Screw Capillary Adjuster 1510226800

17 Clamp Bush Guide 810134300

18 Nut Lock M12 X 0.5 1510226700

19 Bearing Bush Nebulizer 310046600

20 Nut Lock M12 X 0.5 1510226700

21 Screw Lock Dog Point M8 1510226000

22 Screw M6 X 6 Ertalyte 1510226500

11

15

14 2

2

3

4

5

9

6

7

Gas / Gasbox


O-rings


1 Kit, Mk 7 O-rings, aqueous, complete set, include Item 2-6 9910093400

2 O RING 1/8 IDX 1/4 ODX1/16IN NIT, O-Ring Screw Bead Adjuster Nitrile 6910000100

3 O RING 1/32 IDX 3/32 ODX1/32IN NIT, Nitrile 6910009700

4 O RING 3/16 IDX 5/16 ODX1/16IN NIT, Nitrile 6910009800

5 O RING 15/16 IDX 1- 1/8 ODX3/32IN NIT, O-Ring Bung S/Chamber Nitrile 6910010500

6 O RING ID1 7/16 OD1 5/8X3/32NITRIE BS127, O-Ring Spraychamber Nitrile 6910037000

7 O RING 11/16 Idx 7/8 Odx 3/32in Nitrile, flame det. 6910004000

8 ORING ID1/8XOD1/4X1/16 FL ELAS BS006(WT), O-Ring Screw Bd Adj Organics, Organics 6910036900

9 ORING ID1 7/16XOD1 5/8X3/32PERFLUORV-127, O-Ring Spraychamber Organics, Organics 6910036800

10 O RING 15/16 IDX 1- 1/8 ODX3/32IN FL, O-Ring Bung S/Chamber Organics, Organics 6910013100

11 O RING 3/16 1DX 5/16 ODX1/16IN FL, Organics 6910013600

Spray Chamber / Nebulizer supplies


1 Assy Capillary Holder,include spanner lockout nebulizer, tape, o-rings, include Item 2-5 9910024500

2 Tubing-Capillary Std Nebs 9910024800

3 Capillary Tube Hivac Neb (3/pk) 9910044000

4 Wire Nebulizer Cleaning 9910024700

5 Spring Nebulizer 4610017400

6 PTFE impact beads (5/pk) 9910053300

7 Glass impact beads (5/pk) 9910025700

8 KIT NEBULIZER CAPILLARY MK 7 incl. Assy capillary holder nebulizer, include Item 2-5 9910093000

Software


6 Software

Software


1 SpectrAA Base 5.2 G9270AA

2 SpectrAA Base Upgrade.from older revisions(e.g. SpectrAA 5.1) to SpectrAA 5.2 Base G9271AA

3 SpectrAA CFR, not yet released G9272AA

4 SpectrAA Pro Upgrade. from older revisions(e.g. SpectrAA 5.1) to SpectrAA 5.2Pro G9285AA

5 SpectrAA Base to Pro Upgrade. G9284AA

Tools / Standards


7 Tools / Standards

Tools


1 ASSY BACK LIGHTING JIG 7210019400

2 Tool jig Backlighting bracket 7210027800

3 Tool optics alignment target 7210027400

4 Dummy grating SP50-220 7210027300

5 Tool spray chamber, nebulizer tool 7210027600

6 Tool venture extraction 7210027700

7 Nebulizer tool 7210027600

8 Venturi insertion tool 7210027700

9 Kit, tools - 2 Posidrive screwdrivers (No. 1, 2), 2 wire insertion tools 9910075000

10 Ball driver, 5 mm (mono screws) 7210027000

11 Posidrive Offset screwdriver, No. 1 and 2 (lamp socket adjustment) 7210027100

12 Spanner, 7 mm, ring and open end (optics adjustment) 7210027200

13 Ball driver, 2.5 mm (slit motor removal) 7210020400

14 Ball driver, 3 mm (mono collimators) 7210020800

15 Burner cleaning strip (100/pk) 9910053900

16 Gas module field calibration kit, incl. pressure gauge, tubings, hoses, adapters 9910045600

17 Tool lamp select alignment target 7210035100

18 Assy Loom Backlighting Adapter 110616390

1

7

8 2

1

3

3

Tools / Standards


Standards


1 Filter 1 ABS, certified 7210035500

2 Lithium standard solution, 100ml 8200202801

3 Copper-Cu, Coded HC Lamp, Certified 5610101490

4 Arsenic-As Coded HC Lamp, Certified 5610100390

5 Gold - Au, Coded HC Lamp, Certified 5610102190

6 Sodium – Na / Potassium –K, Coded HC Lamp, Certified 5610107090

Diverse


7 Book Analytical Methods For Flame AA 8510000900

8 Serial to parallel converter - Sp 50/55 printing - 240V 110360690

9 Serial to parallel converter - Sp 50/55 printing - 110V 110360700

Other parts / not shown in this IPB


8 Other parts / not shown in this IPB

Optical parts


1 Assy M5 D2 Toric, Mirror 110598890

2 Assy M5 Lmp Sel Toric, Mirror 110599090


4 Assy M3 Spere, Mirror 110599690

5 D2 UV source lamp 1 pk 5610021800

6 Lamp Select Handle 2610030400

7 Retention Block - Micrometer 810043800

8 Spring Grating 4610004000

9 Loom Mono Opto 110613290

10 Assy Loom Hc Lamp-Select Motor 110612990

11 Ribbon Cable Pmt/Iface 26w 110613400

12 Kit, Background correction upgrade 9910092500

13 Kit, Single to double beam upgrade 9910092600

AA 50/55


14 Display Module 50/55 110627890

15 Control/Display Board 50/55 210152790

16 Keyboard Membrane 4810034100

17 Keyboard Board 210152890

18 LCD Display 50/55 110626790

19 Ribbon Cable, Display 110626600

20 Window, Display 50/55 2010084000

21 Contact Fingers RFI/EMI97-515 .610 Mt - Sp50 Display Module 1210075400



Gas


1 Cnctr Socket (Crimp) Utilux H9001/R3000 - D2 Loom 1210038400

2 Housing Receptacle 3way/Ears/Tab - D2, Power, Gasbox Looms 1210038600

3 Contact Fml M2871-T/R8000 - Gasbox, Lamps Looms 1210077100

4 Hose Fuel Sae 30r6 6,0mm Id 3710023300

5 Tube, nylon, 1/4” OD 3710008200

6 Assy Inlet Fitting Air & N2O 110314800

7 Ball St St 0.25 Aisi 420C - Flowmeters 310000300

8 Valve B-4ma Vic Fittings - Acetylene Needle (Flow) Valve 5710003300

9 Seat Valve - Inlet Manifold 5710008800

10 Cnctr Mle 1/4 Tube X 1/8 Bspt 1610026900

11 Elbow Male Brass 1/8 Bsp 1/4 Tube 1610027000

12 Cnctr Adaptr Cajon B-4-Hc-A401 - “T” Adapter 1610046800

13 Barb Male Brass 1/4 Bsp 1/4 Hose 1610050900

14 Barb Male Brass 1/8 Bsp 1/4 Hose 1610070100

15 Barb Restrictor 1/8 Bspt 1610112000

16 T-Piece S/Lok Gas Cal Update 110630290

17 Air line Adapter (9/16 UNF) 1610072000

18 N2O line adapter (3/4 UNF) 1610072200

19 Acetylene Line adapter (9/16 UNF LH thread 1610072100

20 Hose clip, tridon (quantity 3) 810041700

21 Tube Dekabon 1300 1/4inch Diam. 3710011300

22 Tube Teflon .062 Odx .016in Wl 3710024800



Screws / washers / nuts /…


1 Clamp Cable S/Adh 810055300

2 Foot Rubber 25 Dia X 21mm Long 810074100

3 Clamp Hose Jubilee Size # 000 S/S 810094500

4 Nut 8 Ba Hex 1510020500

5 Nut 8 Speed 'U' 1510027100

6 Washer Curved 6.7 Id X 12.5 Od 1510045500

7 Washer Flat 3.6 Idx 9.7 Od 1510048200

8 Screw 8ba X .50 Ch 1510062200

9 Screw 8ba X .50 Pan 1510062400

10 Screw Unc 6-32x0.37 Pan 1510066800

11 Screw Knurled Unc 6-32 - Lamp Turret 1510078600

12 Screw M 4 X 8 Set Black 1510099700

13 Pin Spring 1.5 Dia X 10mm 1510102800

14 Screw M 4 X 5 Set Black 1510106400

15 Screw M 3 X 6 Pan Xylan 1510107100

16 Screw M 3 X 8 Pan Xylan 1510107200

17 Screw M 3 X 10 Pan Z/Plt 1510107300

18 Screw M 4 X 10 Pan Z/Plt 1510108100

19 Screw M 4 X 12 Pan Captive W. 316 S/S 1510108200

20 Screw M 4 X 8 Csk Xylan 1510109000

21 Nut M 3 Hex 1510110000

22 Nut M 4 Hex 1510110100

23 Screw M 5 X 12 Cap Black 1510123900

24 Washer Special 5.0 Id 12.0 Od 1510126900

25 Nut M10 Brass Thin 1510141500

26 Nut Special M9x0.5 1510148600

27 Nut Speed U 8 1510154300

28 Screw Adjusting Unc 6-32 Lamp 1510194700

29 Knob Thumbscrew 8 2510023000

Attachments/Supporting Documents


9 Attachments/Supporting Documents

The documents listed in the following table are referenced but not included in the body of this manual.

NOTE

Item Description Number of Pages

1 AA 140 / 240 / 280 service manual 473