abacus 5000 5 easy steps - spirent abacus 5000 familiarize the user with the ‘5 easy steps’ to...

ABACUS 50005 easy steps to start a test

November 2007

P/N 71-002990 Rev. A

This example: Setting up Abacus to test a Trunking Gateway – SIP to PSTN

Purpose of 5 Steps

Provide the user with general procedures and guidelines for configuring Abacus 5000

Familiarize the user with the ‘5 Easy Steps’ to configure and run a test using Abacus 5000

This illustration is only an example of how to configure Abacus 5000 and may not fully apply to the user’s application. Refer to the user manuals and online Help available in the Abacus Application Software

Hardware Setup

System Controller Factory Default IP ConfigurationIP address: 10.30.14.214 IP mask: 255.255.254.0 Gateway IP: 10.30.14.1

PCG3ICG3

Back Cards

T1 (RJ48) Fast Ethernet (RJ45)

Fast Ethernet (RJ45)

T1 (RJ48)

Abacus 5000

Trunking Gateway

Diagram

E1/T1

Trunking Gateway

Analog PhonesSIP End Points

Abacus 5000PCG3 Card ICG3 Card

10/100/1000

Ethernet

This example includes a Trunking Gateway as a system under test (SUT) without Media Gateway Controller (MGC)

5 Easy Steps to setup a test

1.

2.

3.

4.

5.

Channels

Protocol Selection

Partition and Timing

T1 - Phone Book

Start/Stop the Test

SIP - Phone Book

Step 1. Protocol Selections

Slot Number

Type of Card

Type of Signaling

Carrier

Subscriber or Exchange

Companding Law u-law a-law

Frame ESF/D4

Line Coding B8ZF/AMI

Circuit Description


System Under Test Configuration


Audio Codec for RTP

T1/E1 CAS Protocol


Select and disable the channels that are not being used in order to keep the test simple


Select Port 0

Number of Channels

IP Configuration


VoIP Protocol Configuration

Step 2. Channels

Select the “3 Tone” for a simple path confirmation

Step 2. Channels

For more advanced path confirmations and quality measurements, select “Advanced”

Step 3. Partition and Timing

Split Screen

Select the Interface for Configuration

“Originate” / “Terminate” assignment


Link Channels

Only “24”Channels


Call Timing can remain as default


The Scripts for Originate and Terminate can remain the same as the default


Select the configure button for the SIP Phone book

Step 4. Phone Book

Select the configure button for the SIP Phone book

Step 4. Phone Book

User Name

URI Domain

Subnet Mask

GatewayEnd Point IP Address

Own Phone Numbers

Number of End Points

Step 4. Phone Book

External Phone Numbers

Phone Number to Call

Step 4. Phone Book

T1 Subscribers

Own and External Phone number configuration

Phone number to call

Step 5. Start the Test

Start the Test

Spirent Communications, Inc.26750 Agoura RoadCalabasas, CA 91302 USA

Support ContactsU.S. EuropeE-mail: [email protected] E-mail: [email protected]: http://support.spirentcom.com Web: http://support.spirent.comToll Free: +1 800-SPIRENT (+1 800-774-7368) Phone: +33 (0) 1 61 37 22 70Phone: +1 818-676-2616 Fax: +33 (0) 1 61 37 22 51Fax: +1 818-880-9154

ChinaE-mail: [email protected]: http://support.spirentcom.com.cnToll Free: +1 800-810-9529 (mainland China only)Phone: +86 10 8233 0033 (rest of the world)Fax: +86 10 8233 0022

Copyright© 2007 Spirent Communications, Inc. All Rights Reserved. All of the company names and/or brand names and/or product names referred to in this document, in particular, the name "Spirent" and its logo device, are either registered trademarks or trademarks of Spirent plc and its subsidiaries, pending registration in accordance with relevant national laws. All other registered trademarks or trademarks are the property of their respective owners. The information contained in this document is subject to change without notice and does not represent a commitment on the part of Spirent Communications. The information in this document is believed to be accurate and reliable, however, Spirent Communications assumes no responsibility or liability for any errors or inaccuracies that may appear in the document.

abacus 5000 5 easy steps - spirent abacus 5000 familiarize the user with the ‘5 easy steps’ to...

Documents