abb gpg building automation, november 2016 abb i-bus knx ... · abb gpg building automation,...

© ABB GroupNovember 10, 2016 | Slide 1

ABB i-bus® KNXLogic Controller ABA/S 1.2.1

ABB GPG Building Automation, November 2016

Logic Controller ABA/S 1.2.1

The new Logic Controller is an extremelypowerful device for almost unlimitedcustomized logic functions.

It can easily and reliably accommodatealtered or extended functionality requestsduring construction or usage of thebuilding.

The Logic Controller opens new applicationfor the KNX systems (e.g. HVAC)

Overview

Logic Controller ABA/S 1.2.1

§ One device for all solutions providing you thecertainty that all requirements can be covered

§ Up to 3000 function elements (ABL/S: 140)

§ Extensive logic functions, like- Mathematics- Calendar and timers- Room temperature control

§ Simulation (offline and online)

§ Composite function blocks

§ IP interface for fast programming

§ Simple Web Server for editing values

What’s new?

ABB i-bus® KNX Logic Controller ABA/S 1.2.1

§ Introduction

§ Planning

§ Installation

§ Commissioning


What is a Logic Controller ?§ A Logic Controller provides numerous

functions like logic, timer, mathematicalfunctions, PID controller

§ It works more as a superior intelligence toimplement powerful solutions with sensorsand actuators in KNX building automation

Why do we need a Logic Controller ?§ The functional requirements are growing

continuously in intelligent buildings, notalways feasible with the existing KNXdevices, but can be covered by the LogicController efficiently

What it is…

KNX telegrams1 bit, 1 byte, …4 byte

KNXdevices

LogicController

KNXdevices

Processing,

Evaluation,

Calculation

KNX telegrams1 bit, 1 byte, …4 byte


Logic Controller ABA/S 1.2.1§ Modular installation device (MDRC)

§ Width: 4 MW

§ Power supply:

§ 24 V DC or PoE (LAN connection)

§ Bus connection terminal behind cover

§ LAN connection

§ PoE (Power supply), WebUI,Download Application, Monitor

§ LEDs (ON, LAN/Link, KNX telegram)

Device technology - Hardware


LED’s§ ON

§ Flashes slowly while the system is booting orLogic engine stopped

§ Lit up continuously when the system has beeninitialized permanently

§ Flashes rapidly when an error has occurred inthe logic processing or the logic processing wasstopped

§ LAN/LINK§ Lit up continuously when the auxiliary voltage is

present and the router is connected to an IPnetwork

§ Flashes with data traffic via LAN§ Telegram

§ When booting is complete, lit up continuouslywhen the auxiliary voltage is present and therouter is connected to KNX

§ Flashes with data traffic via KNX/TP

Device technology - Hardware


§ Functional Element: Any typewhich is available

§ KNX IN/Outputsà Group Objects

§ Group Adresses: each addresscounts, also identical

§ Web UI: Input and indication ofvalues via Web browser

Device technology - Software

Description MaximumNumber

FunctionalElements 3000

KNX In/Outputs 500

Group Addresses 2000

Web UIIn/Outputs 60

ABB i-bus® KNX Logic Controller ABA/S 1.2.1Device technology – Software ETS

Menu andFunctions SimulationWorksheet

CommentOutput

Input

Function ElementComment

Properties(Parameter)of a Block

Grid

In/Outputs,Function Elementspositioned via drag and drop

Help forselectedelementand onlinemanual


§ Application for ETS4 and ETS5(not ETS3 any more !)

§ Application fully integrated in ETS,no separate software required

§ User friendly graphical environmentin ETS

§ Optional: Accessing selectedfunctions via Web UI, only webbrowser needed, covering partlytypical i-bus tool functionality(Simulation and testing)



§ Integration in the i-bus® Tool

§ Detection of connected Logic Controllerwith display of data

§ Device Name, Firmware

§ IP Data: IP address, MAC address

§ Firmware update possible

§ Operation and test via ETS Plug inand Web UI


ABB i-bus® KNX Logic Controller ABA/S 1.2.1Function Elements

ABB i-bus® KNX Logic Controller ABA/S 1.2.1Composite Function Block

The Logic Controller allowsto create own FunctionBlocks.

These Composite FunctionBlocks can be saved andimported into otherprojects.

If required, they even canbe protected againstunauthorized access.

ABB i-bus® KNX Logic Controller ABA/S 1.2.1Offline Simulation


§ 60 In- or Outputs accessable via WebUI for operationor overwriting of values, e.g. change of a comparisonvalue or change of parameter of a PID controller

§ Please note: Not comparable with a visualisation

WebUI

Logic Controller ABA/S 1.2.1Benefits I

+ Graphical programming interface in ETS softwareenvironment without the need to install additional softwareavoiding additional maintenance effort and group addressdepreciation

+ Comprehensive list of function elements for all typicalbuilding applications allowing to serve diverse projectrequirements with a single device

+ It is possible to create self-defined function blocks. Theycan be stored and reused in future projects saving timeand enhancing reliability

+ WebUI for changing and displaying values

Logic Controller ABA/S 1.2.1Benefits II

+ Inbuilt simulator facilitates efficient and reliablecommissioning on the project’s site. All functions can betested before going live ensuring a safe operation

+ Current live state of the logic can be monitored in real-timefacilitating troubleshooting and diagnostics

+ Short power failures (< 1min) will be bridged by theinternal energy buffer thus the previous system state canbe restored after voltage recovery

+ Fast download of application program by utilizing LANinterface saving time during commissioning

Logic Controller – Launch ConceptComplete Range for Logic Control

Logic ModuleLM/S 1.1

Application Unit LogicABL/S 2.1

Application Unit TimeABZ/S 2.1

Logic ControllerABA/S 1.2.1

149.50 € 599 € 438.50 € 699 €

Important: Logic Controller ABA/S 1.2.1 does not replaceany existing device handling logic, time functions or othersuperior intelligent functions !


§ Introduction

§ Planning

§ Installation

§ Commissioning

ABB i-bus® KNX Logic Controller ABA/S 1.2.1Hardware

§ From the installation point of view theLogic Controller is easy to plan

§ No classical in/outputs to be observed

§ Power supply 24 V DC or PoE

§ Space in DB (4MW)

ABB i-bus® KNX Logic Controller ABA/S 1.2.1Software

§ Is a ABA/S necessary or possibleto use other solutions like ABL/S 2.1 ?

§ Planning concerning software andcapacity§ Which functions ?

§ Directly available or to be created ?

§ How many ?

§ Often one device is sufficient due tothe big number of functions per device

§ In case of known comprehensivefunctionality (quantity) more thanone ABA/S might be required


Logic Elements 3000

KNX In/Outputs 500


Web UIIn/Outputs 60


§ Decentralized installation to reducebus traffic can be considered

§ Practically, the number of KNXDatapoints will be the limit(500 KNX IO’s)

§ In case of expected but in theplanning phase not yet knownfunctionality a Logic Controllershould be budgeted already

§ Please note: Commissioning cantake some time, to be considered(Costs and time)


Logic Elements 3000

KNX In/Outputs 500


Web UIIn/Outputs 60


§ Summary for Planner:

The Logic Controller ABA/S 1.2.1is with its extraordinarycapability for almost everyfunctional requirement the rightchoice.

Simple installation, clear anduser friendly commissioning withgraphical environment in the ETS,a dedicated hardware for thetask it was made for with directconnection to KNX TP in the lineensures a successful implementationand a well running solution.


§ Introduction

§ Planning

§ Installation

§ Commissioning


§ The device is suitable for installation indistribution units or small housings on a35 mm mounting rail according toEN60715 (any position)

§ Accessibility of the device for thepurpose of operation, testing, visualinspection, maintenance and repairmust be ensured

§ Power supply (if not PoE):24 V DC via screw terminals

§ The connection to the KNX isimplemented using the supplied busconnection terminal

§ The connection to the IP network isestablished using an RJ 45 plug

Installation


§ Thanks to the new way to snap KNXdevices from ABB on the rail in adistribution board especiallydismounting is very simple withoutscrewdriver and thus user friendly

§ Snap onto mounting rail

§ Remove from mounting rail

Installation

LED Function Description

ON(green)

ON

Flashing slowly

Flashing quickly

System has been initialized permanently

System is booting

Error has occurred in the logic processing or the logicprocessing was stopped

LAN / LINK(yellow)

ON

Flashing

Auxiliary voltage is present and device is connected toan IP networkData traffic via LAN

Telegram(yellow)

ON

Flashing

Booting complete, auxiliary voltage present and device isconnected to KNXData traffic via KNX/TP

Programmingbutton

Press Assignment of the individual address

Programming LED(red)

ON The LED comes on when the Programming button ispressed, in order to assign a individual address

ABB i-bus® KNX Logic Controller ABA/S 1.2.1Display/Operating elements


§ Introduction

§ Planning

§ Installation

§ Commissioning

ABB i-bus® KNX Logic Controller ABA/S 1.2.1First Steps

§ see First Steps in the online manual

http://www.knx-gebaeudesysteme.de/sto_g/_All/MANUALS/ABAS_121/EN/01_technical_data/First_steps/index.html


§ For Firmware update or if IPdata (e.g. IP address for WebUI access) is needed

§ PC with i-bus® tool has to belinked via IP connection of ABA/S

§ After Start of i-bus® tool click onà ‘Connect’ andà ‘IP devices’

§ All supported ABB IP devices willbe displayed

i-bus® Tool


§ By selecting on the left side‘ABA/S’ only this device willbe shown with

§ Name, Firmware(Status and version)

§ IP Data: IP address,MAC address

§ Button ‘Detailed data’ givesmore related information

i-bus® Tool


§ Firmware update: In case of newfirmware version an update isfeasible with i-bus® Tool

§ Update Information and optionto download in i-bus® Tool

§ The firmware update can betriggeredà updateà Start update

§ For firmware update Logic Controllerhas to be linked via LAN connection

Note: In case of firmware updatei-bus tool has to be startedas administrator

i-bus® Tool

ABB i-bus® KNX Logic Controller ABA/S 1.2.1IP adjustments

§ Static IP adress

§ IP address, SubnetMask and DefaultGateway can beentered manually

§ Dynamic IP address

§ IP address will beassigned automatically(DHCP)

§ LAN connection for

§ PoE (Power supply),WebUI, DownloadApplication, Monitor


§ ABA/S 1.2.1 has an integratedLAN interface for …

§ WebUI access

§ Supply via PoE

§ Monitor

§ Fast application download

§ In case of comprehensive data tobe downloaded it is recommendedto use the LAN interface for directdownload independent of theKNX bus cable

Download via IP connection

LAN connection

PC withETS

LogicController


§ In order to avoid the KNXbus cable as a bottle neckdownload of application viaETS has to be carried out inIP Routing Mode

§ In this case the networkinterface of the PC acts asan direct access to theLogic controller resulting ina quick download

§ Please note: Download ofphysical address of ABA/Shas to be done the classicalway (USB or IP tunneling)

Download via IP connection

LAN connection

abb gpg building automation, november 2016 abb i-bus knx ... · abb gpg building automation,...

Documents