abb university switzerland course program 2015 … · abb university switzerland course program...
TRANSCRIPT
ABB University Switzerland
Course Program 2015Learning Center Power Electronics and MV Drives
2 | Course Program 2015
Course Program 2015 | 3
Editorial
IntroductionThe mission of our learning center is to provide competence to our customer and employees. We want to enable them to operate their assets in a safe, economical and efficient way. Our vision is to assist our customers in optimizing the performance, safety and reliability of their assets.
Our learning center offers a wide range of professional training courses adapted to meet your needs and to establish a long-time partnership.
Your business is exclusive — your training and education should be exclusive, as well!
Training coursesScheduled classes (public)In our learning center in Turgi, Switzerland, we use our high quality training equipment and real simulating training units. The trainees will gain practical experience using available tools and techniques while doing practical exercises.
Tailored classes (on request)The training can be held in our learning center in Switzerland or on-site at customer’s facilities. The program and content can be adapted according to their needs and requirements. All infor-mation of the installed unit are used to run a custom-tailored training.
Our learning center offers a variety of additional course languag-es. Please contact us for more details.
Travel information More detailed travel information can be found on our homep-age or in the general ABB University Switzerland brochure.
Training conditionsOur learning center shall not reserve any resources such as trainers, equipment, training material and facilities without hav-ing received the officially signed purchase order.
CancellationExcept where otherwise stated, no fee is to be paid if the can-cellation is received more than 10 calendar days prior to the start of the course. Thereafter 50% of the course fee is charged. For cancellations received less than 10 working days before the start of the course, the full fee becomes due.
Hands-on training Classroom training
4 | Course Program 2015
Course portfolio MV DrivesLearning path - Service and Commissioning
Target group- Field service engineers of ABB and partners- Testing- Apllication Engineering
E-Learning(to be completed)
Classroom training in Turgi, Switzerland
Classroom training(optional)
G790e MV DrivesIntroduction 1 (e-Learning)
G791e MV DrivesIntroduction 2(e-Learning)
ACS1000
G711eACS1000 e-Learning
G711ACS1000 S&Ctraining
G719ACS1000 Hands-on training
ACS2000
G781eACS2000 e-Learning
G781ACS2000 S&Ctraining
G789ACS2000 Hands-on training
ACS5000
G741eACS5000 e-Learning
G741ACS5000 S&Ctraining
G749ACS5000 Hands-on training
ACS6000
G761eACS6000 e-Learning
G761ACS6000 S&Ctraining
G769ACS6000Hands-on training
G795DriveMonitor™ S&CtrainingACS1000 and ACS6000
G711eACS1000 e-Learning
G761eACS6000e-Learning
G720ACS1000 andACS6000 S&Ccombined training
ACS1000 and ACS5000
G711eACS1000 e-Learning
G741eACS5000e-Learning
G721ACS1000 andACS5000 S&Ccombined training
ACS5000 and ACS6000
G741eACS5000 e-Learning
G761eACS6000 e-Learning
G722ACS5000 andACS6000 S&Ccombined training
ACS1000 and ACS2000
G711eACS1000 e-Learning
G781eACS2000e-Learning
G723ACS1000 andACS2000 S&Ccombined training
MEGADRIVE-LCI
G830 MEGADRIVE-LCI with AC 800PEC S&C training
G839 MEGADRIVE-LCI with AC 800PEC Hands-on
Wind Converters
J715PCS6000 EXPERT training
Description
Course Program 2015 | 5
Course portfolio MV DrivesLearning path - Operation and Maintenance
Target group- Operation- Maintenance- Electician- Sales
E-Learning(to be completed)
Classroom training in Turgi, Switzerland
Classroom training(optional)
G790e MV DrivesIntroduction 1 (e-Learning)
G791e MV DrivesIntroduction 2(e-Learning)
ACS1000
G700ACS1000 O&Mtraining
ACS2000
G770ACS2000 O&Mtraining
ACS5000
G731ACS5000 Air CooledO&M training
ACS6000
G732ACS5000 Water Cooled O&M training
G794DriveMonitor™ O&M training
G750ACS6000 O&Mtraining
G800MEGADRIVE-LCI withPSR2 O&M training
G820MEGADRIVE-LCI withAC 800PEC O&M training
G875ACS6000c Cycloconverter O&Mtraining
MEGADRIVE-LCI
Cycloconverter
G870PSR Cycloconverter O&M training
J710PCS6000 BASICtraining
Wind Converter
Description
6 | Course Program 2015
Course portfolio MV Drives
Course PricesThe following prices are valid for courses conducted in the Learning Center Power Electronics and MV Drives in Turgi, Swit-zerland.
The course fees per person include one documentation set, daily transportation from the hotel to our learning center, lunch-es and coffee breaks. Neither travel, other living expenses nor health insurance are included.
Our price is calculated without taxes, VAT, withholding taxes, customs, fees and other duties. Shall any of those taxes apply, it shall be borne by the client.
The latest version of the course schedule can be found on Internet: www.abb.ch/abbuniversity
Operation and Maintenance training
Course Description Duration Date CHF/PersonG700 ACS 1000 Operation and Maintenance 3 days scheduled 3660G770 ACS 2000 Operation and Maintenance 3 days scheduled 3660
G731 ACS 5000 Air-Cooled Operation and Maintenance 3 days scheduled 3890G732 ACS 5000 Water-Cooled Operation and Maintenance 4 days scheduled 5180G750 ACS 6000 Operation and Maintenance 4 days scheduled 5180
G800 MEGADRIVE LCI with PSR2 Operation and Maintenance 4 days scheduled 4950G820 MEGADRIVE LCI with AC 800PEC Operation and Maintenance 4 days scheduled 4950G794 DriveMonitorTM Operation and Maintenance 1 day on request on requestG875 ACS 6000c Cycloconverter Operation and Maintenance 4 days scheduled 5180G870 PSR Cycloconverter Operation and Maintenance 3 days on request on requestJ710 PCS6000 BASIC training 5 days on request on request
Service and Commissioning training*
Course Description Duration Date CHF/PersonG711 ACS 1000 Service and Commissioning 3 days scheduled 3030G781 ACS 2000 Service and Commissioning 3 days scheduled 3030G741 ACS 5000 Service and Commissioning 4 days scheduled 3390
G761 ACS 6000 Service and Commissioning 4 days scheduled 3390G720 ACS 1000 & ACS 6000 Service and Commissioning combined course 5 days scheduled 5310G721 ACS 1000 & ACS 5000 Service and Commissioning combined course 5 days scheduled 5310G722 ACS 5000 & ACS 6000 Service and Commissioning combined course 5 days scheduled 5310G723 ACS 1000 & ACS 2000 Service and Commissioning combined course 5 days scheduled 5310G830 MEGADRIVE LCI with AC 800PEC Service and Commissioning 5 days scheduled 3410G795 DriveMonitorTM Service and Commissioning 2 days on request on requestJ715 PCS6000 EXPERT training 5 days on request on request
*Training courses are only available for ABB employees and channel partners and part of the field service engineer’s certification program.
Course Program 2015 | 7
Course portfolio MV Drives
Hands-on training*
Course Description Duration Date CHF/PersonG719 ACS 1000 Hands-on 1 day scheduled 910G789 ACS 2000 Hands-on 1 day scheduled 910G749 ACS 5000 Hands-on 1 day scheduled 910G769 ACS 6000 Hands-on 1 day scheduled 910G839 MEGADRIVCE LCI Hands-on and Update 3 days scheduled 2650
*Training courses are only available for ABB employees and channel partners and part of the field service engineer’s certification program.
E-learning
Course Description Duration Date CHF/PersonG790e MV Drives Introduction 1 n.a. n.a. for freeG791e MV Drives Introduction 2 n.a. n.a. for freeG786e ACS 2000 Sales n.a. n.a. for free
Classroom training
8 | Course Program 2015
Course portfolio Power ControlLearning path - Service and Commissioning
Target group- Field service engineers of ABB and partners- Testing- Apllication Engineering
*Training courses only available for ABB employees and part of the field service engineer’s certification program.
J990Excitation Systems and SynchronousMachines Fundamentals
UNITROL 6000*
J681UNITROL 6080 S&C training
G830 MEGADRIVELCI with AC 800PECS&C training
G839 MEGADRIVELCI with AC 800PECHands-on training
G850 MEGATROL S&C
J688UNITROL 6080 Hands-on and Update training
J692UNITROL 6800 Update trainingUN6080 to UN6800
J693Control BuilderProgramming for UNITROL 6000
MEGATROL*
UNITROL 1010/1020J131UNITROL 1010/1020S&C training
UNITROL 5000
J640UNITROL 5000 S&C training
J649UNITROL 5000Hands-on and Update training
UNITROL F
J540UNITROL FS&C training
J590UNITROL F Hands-onand Update training
SYNCHROTACT 5J900SYNCHROTACT 5O&C training
UNIREC
J670UNIREC S&C training
E-Learning(to be completed)
Classroom training in Turgi, Switzerland
Classroom training(optional)
Description
Course Program 2015 | 9
Course portfolio Power ControlLearning path - Service and Commissioning
Target group- Field service engineers of ABB and partners- Testing- Apllication Engineering
*Training courses only available for ABB employees and part of the field service engineer’s certification program.
J950PSR2/FUPLAProgrammingtraining
Control 800xA
J450AC 800PEC Matlab/Simulink training
J400AC 800PEC Hardwareand Tools training
J410AC 800PEC ControlBuilder training
High Power Rectifier*
J201eHPR Basic Knowledgee-learning
J202eHPR AdvancedSystem Knowledgee-learning
J210High Power RectifierS&C training
J400AC 800PEC Hardwareand Tools training
J410AC 800PEC ControlBuilder training
FOCS
J251FOCS Level 1 training
J252FOCS Level 2 training
E-Learning(to be completed)
Classroom training in Turgi, Switzerland
Classroom training(optional)
Description
10 | Course Program 2015
Course portfolio Power ControlLearning path - Operation and Maintenance
Target group- Operation- Maintenance- Electician
E-Learning(to be completed)
Classroom training in Turgi, Switzerland
Classroom training(optional)
J990Excitation Systems and SynchronousMachines Fundamentals
J950PSR2/FUPLAProgrammingtraining
UNITROL 6000
J683UNITROL 6800 O&M training
J684UNITROL 6080 O&M training
UNITROL 5000
J620UNITROL 5000 O&M training
UNITROL F
J520UNITROL F O&M training
SYNCHROTACT 5
J900SYNCHROTACT 5O&C training
J450AC 800PEC Matlab/Simulink training
Control 800xAJ452AC 800PEC Matlab/Simulink for PEC-3training
J400AC 800PEC Hardwareand Tools training
J410AC 800PEC ControlBuilder training
High Power Rectifier
J220High Power RectifierO&M training
FOCS
J251FOCS Level 1 training
J252FOCS Level 2 training
Description
Course Program 2015 | 11
Course portfolio Power Control
Course PricesThe following prices are valid for courses conducted in the Learning Center Power Electronics and MV Drives in Turgi, Swit-zerland.
The course fees per person include one documentation set, daily transportation from the hotel to our learning center, lunch-es and coffee breaks. Neither travel, other living expenses nor health insurance are included.
Our price is calculated without taxes, VAT, withholding taxes, customs, fees and other duties. Shall any of those taxes apply, it shall be borne by the client.
The latest version of the course schedule can be found on Internet: www.abb.ch/abbuniversity
Operation and Maintenance training
Course Description Duration Date CHF/PersonJ990 Excitation Systems and Synchronous Machines Fundamentals 4 days scheduled 1970J220 High Power Rectifier Systems Operation and Maintenance 4 days on request on requestJ320 UNITROL P Operation and Maintenance 5 days on request on requestJ520 UNITROL F Operation and Maintenance 5 days on request on requestJ620 UNITROL 5000 Operation and Maintenance 5 days on request on requestJ683 UNITROL 6800 Operation and Maintenance 5 days scheduled 4940J684 UNITROL 6080 Operation and Maintenance 5 days scheduled 4940J900 SYNCHROTACT 5 Operation and Commissioning 2 days scheduled 2190G840 MEGATROL Operation and Maintenance 5 days scheduled 5630J950 PSR2/FUPLA2 Programming 5 days scheduled 5150J251 FOCS Level 1 2 days scheduled 2190J522 FOCS Level 2 2 days scheduled 2190J400 AC 800PEC Hardware and Tools 2 days scheduled 2520J410 AC 800PEC Control Builder 5 days scheduled 5630J450 AC 800PEC Matlab/Simulink 3 days on request on requestJ452 AC 800PEC Matlab/Simulink for PEC-3 3 days scheduled 3570
12 | Course Program 2015
Course portfolio Power Control
Service and Commissioning training*
Course Description Duration Date CHF/PersonJ210 High Power Rectifier Systems Service and Commissioning 5 days scheduled 5150J340 UNITROL P Service and Commissioning 5 days on request on requestJ390 UNITROL P Hands-on and Update Training 3 days on request on requestJ540 UNITROL F Service and Commissioning 5 days scheduled 4940J590 UNITROL F Hands-on and Update Training 3 days scheduled 3360J130 UNITROL 1000 Service and Commissioning 3 days on request on requestJ131 UNITROL 1010/1020 Service and Commissioning 4 days scheduled 3950J640 UNITROL 5000 Service and Commissioning 5 days scheduled 4940J649 UNITROL 5000 Hands-on and Update Training 3 days scheduled 3360J681 UNITROL 6080 Service and Commissioning 5 days scheduled 4940J688 UNITROL 6080 Hands-on and Update Training 3 days scheduled 3360J692 UNITROL 6800 Upgrade Training UN6080 to UN6800 2 days scheduled 3070J693 UNITROL 6000 Control Builder Programming for UNITROL 6000 5 days scheduled 5630J950 PSR2-FUPLA2 Programming 5 days scheduled 5150G850 MEGATROL Service and Commissioning 3 days scheduled 3570J670 UNIREC Service and Commissioning 5 days scheduled 4940
*Training courses are only available for ABB employees and part of the field service engineer’s certification program.
E-learning
Course Description Duration Date CHF/PersonJ201e High Power Rectifier Basic Knowledge n.a. n.a. for freeJ202e High Power Rectifier Advanced Knowledge n.a. n.a. for free
Course Program 2015 | 13
Learning center location
Stichs
trasse
16
97
3
5
2
1
2
3
4
5
6
7
8
9
Turgi / Untersiggenthal Anmeldung (Portier 1) Austrasse 5300 Turgi
ABB Schweiz AG Medium Voltage Drives
ABB Schweiz AG Power Control & Renewables
ABB Schweiz AG Traction Converters
ABB University
Warenanlieferung (Portier 2)
Gesundheitszentrum
Personalrestaurant Aubrücke
ABB Kinderkrippe (Müüsliburg)
Zieladresse für Navigationssystem:Stichstrasse 15417 Untersiggenthal
Tel. 058 589 30 58
Tel. 058 589 27 95
Tel. 058 585 00 00
Tel. 058 585 00 00
Tel. 058 589 28 04
Tel. 058 589 20 20
Tel. 056 299 31 05
Tel. 056 299 30 59
Tel. 056 210 24 08
Bahnhof SBB
Train Station
Wildenstichstrasse
Vogelsangstrasse
Landstrasse
Landstrasse
P
Bahn
hofs
trass
e
Schön
eggs
trasse
Austra
sse
Steigs
trasse
Steigstrasse
Baden
A1 Ausfahrt 19Brugg
A1 Ausfahrt 19Brugg
Brugg
Koblenz
Brugg
8
4
Learning center location in Turgi, Switzerland
Training rooms ground floor Training rooms 1st floor
ABB Switzerland LtdLearning Center Power Electronics and MV DrivesDepartment DMPC-P55300 TurgiSwitzerland
Phone +41 58 589 38 50 (for Power Electronics)Phone +41 58 589 28 04 (for MV Drives)Fax +41 58 589 33 17
E-Mail [email protected]
www.abb.ch/abbuniversity
Contact us
© C
opyr
ight
AB
B D
ocum
ent
no.
9AK
K10
6103
A82
24