abstract of boq - rites and contract document name of work: construction of multistoried academic...

TENDER AND CONTRACT DOCUMENT

NAME OF WORK: Construction of Multistoried Academic Tower at Zakir Husain Delhi College, New Delhi.

TENDER NO: RITES/CP/TC/ZHDC/Multistoried Academic Tower/2014

FINANCIAL BID

VOLUME –II

APRIL-2014

Tender Document issued to

(Name of Tenderer)_______________________________________________________________________ (Address of Tenderer)_________________________________________ Signature of Officer issuing the Document with Designation and Date of issue ________

(A GOVT. OF INDIA ENTERPRISE)

RITES LIMITED, CP DIVISION, 3RD FLOOR,

RITES BHAWAN-II, Plot No.144, Sector 44, Gurgaon-122003, Haryana (India). Tel – (0124)- 2728305, Fax- (0124) – 2728371

PART 2

FINANCIAL BID

SCHEDULE (BILL) OF QUANTITIES

Name of Work: Construction of Multi Storied Academic Tower in Zakir Husain Delhi College, New Delhi.

Tender No. RITES/CP/TC/ZHDC/Multistoried Academic Tower/2014

Sch No.

PARTICULARS Estimated Cost (In Rs.)

Quoted % above / below in Figures

& Words

Quoted Amount in Rs.

A Civil works (Based on DSR - 2013)

444573184.56

B Electrical works (Based on DSR - 2013)

21640226.00

C HVAC works (Based on DSR - 2013)

1603160.00

MARKET BASED ITEMS

D Civil works (Based on Market Rate Items)

E Electrical works (Based on Market Rate Items)

F HVAC works (Based on Market Rate Items)

Total Amount

Unconditional Rebate, if any

Amount after rebate in Figure

Amount after rebate in words

Sch No. PARTICULARS Estimated Cost (In Rs.)

Quoted % above / below in Figures & Words

Quoted Amount in Rs.

A Civil works (Based on DSR - 2013) 444573184.56

B Electrical works (Based on DSR - 2013) 21640226.00

C HVAC works (Based on DSR - 2013) 1603160.00

MARKET BASED ITEMS

D Civil works (Based on Market Rate Items)

E Electrical works (Based on Market Rate Items)

F HVAC works (Based on Market Rate Items)

Total Amount

Unconditional Rebate, if any

Amount after rebate in Figure

Amount after rebate in words

Name of Work: Construction of Multi Storied Academic Tower in Zakir Husain Delhi College, New Delhi.

Tender No.RITES/CP/TC/ZHDC/Multistoried Academic Tower/2014

DSR Item No.

S. No Description of Item Unit Quantity Rate (Rs.) Amount (Rs.)

1.00 EARTH WORK2.3 1.01 Banking excavated earth in layers not exceeding 20 cm in depth,

breaking clods, watering, rolling each layer with ½ tonne roller, orwooden or steel rammers, and rolling every 3rd and top-most layerwith power roller of minimum 8 tonnes and dressing up, inembankments for roads, flood banks, marginal banks, and guidebanks etc., lead upto 50 m and lift upto 1.5 m :

2.3.1 All kinds of soil CUM 135.00 218.35 29477.25

2.6 1.02 Earth work in excavation by mechanical means (Hydraulicexcavator) /manual means over areas (exceeding 30cm in depth.1.5 m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m and lift upto 1.5m, disposed earthto be levelled and neatly dressed.

2.6.1 All kinds of Soil CUM 41123.59 146.50 6024605.94

2.8 1.03 Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan), including dressing ofsides and ramming of bottoms, lift upto 1.5 m, including getting outthe excavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m.

2.8.1 All kinds of soil. CUM 230.00 148.25 34097.50

2.10 1.04 Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, and dressing of sides, ramming ofbottoms, depth upto 1.5 m, including getting out the excavated soil,and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer byramming, watering, etc. and disposing of surplus excavated soil asdirected, within a lead of 50 m :

2.10.1 All kinds of soil

2.10.1.2 Pipes, cables etc exceeding 80 mm dia. But not exceeding 300 mmdia CUM 795.00 192.75 153236.25

2.24 1.05 Extra rates for quantities of works, executed :

2.24.1 In or under water and/or liquid mud, including pumping out water asrequired

a) 1.05.1 0 to 1 Mtr Basement CUM 3781.08 37.65 142357.65

Basic Rate = 146.50 + 41.75 = 188.25 @ 20%

b) 1.05.2 1 Mtr to 2 Mtr CUM 3634.47 46.00 167185.76Basic Rate = 188.25 + 41.75 = 230.00 @ 20%

c) 1.05.3 2 Mtr to 3 Mtr CUM 3204.29 50.18 160791.30

Basic Rate = 230 + 20.88 = 250.88 @ 20%

Name of Work: Construction of Multi Storied Academic Tower in Zakir Husain Delhi College, New Delhi.Tender No. RITES/CP/TC/ZHDC/Multistoried Academic Tower/2014

DSR SCHEDULE ITEMS (CIVIL) SCHEDULE -A

DSR Item No.


d) 1.05.4 3 Mtr to 4 Mtr CUM 3201.71 58.53 187396.14

Basic Rate = 250.88 + 41.75 = 292.63 @ 20%

e) 1.05.5 4 Mtr to 5 Mtr CUM 3201.71 66.88 214130.42Basic Rate = 292.63 + 41.75 = 334.38 @ 20%

f) 1.05.6 5 Mtr to 6 Mtr CUM 3201.71 71.05 227481.56

Basic Rate = 334.38 + 20.88 = 355.26 @ 20%

g) 1.05.7 6 Mtr to 7 Mtr CUM 3201.71 79.40 254215.85Basic Rate = 355.26 + 41.75 = 397.01 @ 20%

h) 1.05.8 7 Mtr to 8 Mtr CUM 3201.71 87.75 280950.13

Basic Rate = 397.01 + 41.75 = 438.76 @ 20%

i) 1.05.9 8 Mtr to 9 Mtr CUM 3201.71 91.93 294333.28Basic Rate = 438.76 + 20.88 = 459.64 @ 20%

j) 1.05.10 9 Mtr to 10 Mtr CUM 3201.71 100.28 321067.57

Basic Rate = 459.64 + 41.75 = 501.39 @ 20%

2.25 1.06 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, leadup to 50 m and lift upto 1.5 m.

CUM 5194.98 101.50 527290.47

2.26.1 1.07 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.

2.26.1 All kinds of Soil 1.07.1 1.50 Mtr to 3.0 Mtr CUM 6023.14 41.75 251466.101.07.2 3.0 Mtr to 4.5 Mtr CUM 5273.71 83.50 440354.791.07.3 4.50 Mtr to 6.0 Mtr CUM 4835.11 125.25 605597.531.07.4 6.0 Mtr to 7.50 Mtr CUM 4802.57 167.00 802029.191.07.5 7.50 Mtr to 9.0 Mtr CUM 4802.57 208.75 1002536.491.07.6 9.0 Mtr to 10.50 Mtr CUM 4802.57 250.50 1203043.791.07.7 10.50 Mtr to 12.00 Mtr CUM 4802.57 292.25 1403551.08

2.27 1.08 Supplying and filling in plinth with Jamuna sand under floors,

including watering, ramming, consolidating and dressing complete.

CUM 8730.96 843.65 7365874.40

2.34 1.09 Supplying chemical emulsion in sealed containers including deliveryas specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% LTRS 169.66 185.95 31548.28

B 2.00 CONCRETE WORK 4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinthlevel :

4.1.3 2.01 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) CUM 8.00 4921.70 39373.60

4.1.8 2.02 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mmnominal size) CUM 720.02 3920.65 2822937.71

DSR Item No.


4.1.10 2.03 1:5:10 (1 cement : 5 Coarse sand : 10 graded stone aggregate 40mm nominal size) CUM 12.00 3672.80 44073.60

4.2 Providing and laying cement concrete in retaining walls, return

walls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts, struts, buttresses, string or lacingcourses, parapets, coping, bed blocks, anchor blocks, plain windowsills, fillets, sunken floor,etc., up to floor five level, excluding the costof centering, shuttering and finishing :

4.2.3 2.04 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) CUM 39.52 5822.15 230096.45

4.9 2.05 Precasting and placing in position 125 mm dia Bollards 600 mmhigh of required shape, including providing M.S. Pipe Sleeve 50 mmdia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom andembedded 150 mm in cement concrete 1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size), includingnecessary excavation of size 250x250x450 mm deep for the samein bitumen/concrete pavement at specified spacing.

CUM 2.10 519.30 1090.53

4.10 2.06 Providing and laying damp-proof course 40 mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 12.5 mmnominal size).

SQM 40.58 220.60 8951.20

4.12 2.07 Extra for providing and mixing water proofing material in cementconcrete work in doses by weight of cement as per manufacturer'sspecification. KG 990.15 44.36 43923.01

4.14 2.08 Extra for concrete work in superstructure above floor V level for

each four floors or part thereof. CUM 14.40 517.45 7452.79

4.15 2.09 Extra for laying concrete in or under water and/or liquid mudincluding cost of pumping or bailing out water and removing slushetc. complete.

Cum per Mtr Depth 4139.31 385.60 1596117.94

4.17 2.10 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1

cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominalsize) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, includingfinishing the top smooth.

SQM 14.13 378.95 5354.56

C 3.00 REINFORCED CEMENT CONCRETE

5.1 3.01 Providing and laying in position specified grade of reinforcedcement concrete, excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :

5.1.2 3.01.1 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20

mm nominal size) CUM 1.28 5552.25 7106.88

DSR Item No.


5.1.3. 3.01.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size) CUM 8.53 5156.20 43982.39

5.2 Reinforced cement concrete work in walls (any thickness), including

attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers, abutments, posts and struts etc. up to floorfive level, excluding cost of centering, shuttering, finishing andreinforcement :

5.2.2 3.02 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20

mm nominal size) CUM 43.82 6319.20 276907.34

5.3 3.03 Reinforced cement concrete work in beams, suspended floors,roofs having slope up to 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills, staircases and spiral stair casesup to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size).

CUM 4.17 6107.15 25466.82

. 5.9 Centering and shuttering including strutting, propping etc. and

removal of form for : 5.9.1 3.04 Foundations, footings, bases of columns, etc. for mass concrete

SQM 5443.39 186.40 1014646.96

5.9.2 3.05 Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. SQM 28199.25 334.50 9432648.22

5.9.3 3.06 Suspended floors, roofs, landings, balconies and access platform

SQM 36702.26 371.80 13645901.41

5.9.4 3.07 Shelves (Cast in situ) SQM 471.25 371.80 175211.35

5.9.5 3.08 Lintels, beams, plinth beams, girders, bressumers and cantilevers

SQM 19109.97 309.80 5920269.22

5.9.6 3.09 Columns, Pillars, Piers, Abutments, Posts and Struts SQM 13767.95 423.00 5823841.50

5.9.7 3.10 Stairs, (excluding landings) except spiral-staircases SQM 890.01 375.65 334332.26

5.9.13 3.11 Vertical and horizontal fins individually or forming box louvers band,facias and eaves boards SQM 258.50 551.45 142549.83

5.9.15 3.12 Small lintels not exceeding 1.5 m clear span, moulding as in

cornices, window sills, string courses, bands, copings, bed plates,anchor blocks and the like SQM 25.02 186.40 4663.03

5.9.16 3.13 Edges of slabs and breaks in floors and walls

5.9.16.1 Under 20 cm wide SQM 2362.13 111.70 263850.30

5.9.19 3.14 Weather shade, Chajjas, corbels etc., including edges SQM 6.74 468.20 3153.74

DSR Item No.


5.11 3.15 Extra for additional height in centering, shuttering where everrequired with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, forevery additional height of 1 metre or part thereof (Plan area to bemeasured).

5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area

to be measured) SQM 921.00 145.60 134097.60

5.13 3.16 Providing, hoisting and fixing up to floor five level precast reinforcedcement concrete in small lintels not exceeding 1.5 m clear span upto floor five level, including the cost of required centering, shutteringbut excluding the cost of reinforcement, with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size).

CUM 0.10 8042.40 804.24

5.14 3.17 Providing, hoisting and fixing up to floor five level precast reinforcedcement concrete in mouldings as in cornices, windows sills etc.,including setting in cement mortar 1:3 (1 cement : 3 coarse sand)cost of required centering, shuttering but excluding the cost ofreinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size).

CUM 4.78 9044.00 43245.69

5.17 3.18 Providing, hoisting and fixing up to floor five level precast reinforcedcement concrete in vertical & horizontal fins, individually or formingbox louvers, setting in cement mortar 1:2 (1 cement : 2 coarsesand), including the cost of required centering, shuttering butexcluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size).

CUM 35.28 6519.70 230015.02

5.22 3.19 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinthlevel

5.22.3 3.19.1 Cold Twisted Bars KG 1680.00 66.50 111720.005.22.6 3.19.2 Thermo-Mechanically Treated bars KG 1022890.52 66.50 68022219.89

5.22A 3.20 Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinthlevel.

5.22A6 Thermo-Mechanically Treated bars KG 1174752.99 66.50 78121073.93

5.28 3.21 Providing and fixing in position 12 mm thick bitumen impregnatedfibre board conforming to IS: 1838, including cost of primer, sealingcompound in expansion joints.

Per CM Depth per 100 Mtr 10.31 436.30 4498.25

5.31 3.22 Extra for laying reinforced cement concrete in or under water and/

or liquid mud, including cost of pumping or bailing out water andremoving slush etc., complete.

Cum Per Mtr Depth 44597.42 385.60 17196765.15

DSR Item No.


5.33 3.23 Providing and laying in position machine batched and machinemixed design mix M-25 grade cement concrete for reinforcedcement concrete work, using cement content as per approveddesign mix, including pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishing andreinforcement, including admixtures in recommended proportionsas per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per directionof Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverableseparately).

5.33.1 3.23.1 All works upto plinth level CUM 358.17 5704.45 2043185.675.33.2 3.23.2 All works above plinth level upto floor V level CUM 1024.04 6353.00 6505694.36

5.35 3.24 Add / deduct for using extra / less cement in the items of design mix

over and above the specified cement content therein.

QTLS 5596.15 619.65 3467655.59

5.38 3.25 Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for eachfour floors or part thereof. CUM 2961.26 174.20 515851.50

5.40 3.26 Providing and laying in position ready mixed M-25 grade concrete

for reinforced cement concrete work, using fly ash and cementcontent as per approved design mix, and manufactured in fullyautomatic batching plant and transported to site of work in transitmixer for all leads, having continuous agitated mixer, manufacturedas per mix design of specified grade for reinforced cement concretework, including pumping of R.M.C. from transit mixer to site oflaying, excluding the cost of centering, shuttering, finishing andreinforcement, including cost of admixtures in recommendedproportions as per IS : 9103 to accelerate / retard setting ofconcrete, improve workability without impairing strength anddurability as per direction of the Engineer - in - charge.

NOTE- (1) Cement content considered in this item is @ 330kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately.(2) Fly ash conforming to grade I of IS 3812 (Part-1) only be usedas part replacement of OPC as per IS : 456. Uniform blending withcement to be ensured in accordance with clauses 5.2 and 5.2.1 ofIS:456 -2000 in the items of BMC and RMC.

5.40.1 3.26.1 All works upto plinth level CUM 7273.53 5967.95 43408063.365.40.2 3.26.2 All works above plinth level upto floor V level CUM 6828.94 6616.50 45183681.51

D 4.00 BRICK WORK

6.1 4.01 Brick work with common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 in foundation and plinth in:

6.1.2 Cement Mortar 1:6 (1 cement : 6 coarse sand). CUM 297.41 4646.50 1381915.57

DSR Item No.


6.4 4.02 Brick work with common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 in superstructure above plinth level up to floorV level inall shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) CUM 1175.47 5325.10 6259469.96

6.5 4.03 Extra for brick work / AAC block masonry / Tile brick masonry in

superstructure above floor V level, for each four floors or partthereof by mechanical means. CUM 750.86 263.30 197701.47

6.13 4.04 Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth levelup to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 819.73 647.90 531104.75

6.14 4.05 Extra for half brick masonry in superstructure, above floor V levelfor every four floors or part thereof by mechanical means.

SQM 364.33 23.35 8507.00

6.15 4.06 Extra for providing and placing in position 2 Nos 6mm dia. M.S. barsat every third course of half brick masonry. SQM 819.73 69.50 56971.42

6.38 4.07 Providing and laying autoclaved aerated cement blocks masonry

with 100 mm thick AAC blocks in super structure above plinth levelup to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ).The rate includes providing and placing in position 2 Nos 6 mm diaM.S. bars at every third course of masonry work.

CUM 487.71 4827.45 2354384.63

E 5.00 MARBLE AND GRANITE WORK 8.2 5.01 Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,vanity counters, window sills , facias and similar locations ofrequired size, approved shade, colour and texture laid over 20 mmthick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreated with white cement, mixed with matching pigment, epoxytouch ups, including rubbing, curing, moulding and polishing toedges to give high gloss finish etc. complete at all levels.

8.2.1 5.01.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black

marble 8.2.1.1 (i) Area of slab upto 0.50 sqm SQM 501.06 2200.25 1102449.61

8.2.2 5.01.2 Granite of any colour and Shade

8.2.2.1 5.01.2.1 Area of slab upto 0.50 sqm SQM 14.87 3724.70 55367.678.2.2.2 5.01.2.2 Area of slab over 0.50 sqm SQM 1103.91 3769.70 4161394.45

8.3 5.02 Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high glossfinish etc. complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work MTR 278.23 210.65 58609.15

DSR Item No.


8.4 5.03 Extra for fixing marble /granite stone, over and abovecorresponding basic item, in facia and drops of width upto 150 mmwith epoxy resin based adhesive, including cleaning etc. complete.

MTR 134.73 225.75 30415.30

8.5 5.04 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar locationin marble/Granite/stone work, including necessary holes for pillartaps etc. including moulding, rubbing and polishing of cut edges etc.complete.

EACH 125.00 350.80 43850.00

8.10 5.05 Providing and fixing stone slab with table rubbed, edges roundedand polished, of size 75x50 cm deep and 1.8 cm thick, fixed inurinal partitions by cutting a chase of appropriate width with chasecutter and embedding the stone in the chase with epoxy grout orwith cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth

8.10.2 Granite Stone of approved shade EACH 117.00 2963.40 346717.80

F 6.00 WOOD WORK

9.1 6.01 Providing wood work in frames of doors, windows, clerestorywindows and other frames, wrought framed and fixed in positionwith hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.3 Kiln seasoned and chemically treated hollock wood CUM 1.58 50810.85 80374.63

9.12 6.02 Extra for providing frosted glass panes 4 mm thick instead of

ordinary float glass panes 4 mm thick in doors, windows andclerestory window shutters. (Area of opening for glass panesexcluding portion inside rebate shall be measured).

SQM 36.46 5.80 211.44

9.24 6.03 Extra for providing vision panel not exceeding 0.1 sqm in all type ofdoors (cost of glass excluded) (overall area of door shutter to bemeasured) :

9.24.2 Circular SQM 5.04 209.05 1053.61

9.62 6.04 Providing and fixing ISI marked oxidised M.S. sliding door bolts withnuts and screws etc. complete :

9.62.1 6.04.1 300x16 mm EACH 8.00 161.55 1292.409.62.2 6.04.2 250x16 mm EACH 17.00 154.60 2628.20

9.63 6.05 Providing and fixing ISI marked oxidised M.S. tower bolt black

finish, (Barrel type) with necessary screws etc. complete :

9.63.2 200x10 mm EACH 55.00 56.30 3096.50

9.66 6.06 Providing and fixing ISI marked oxidised M.S. handles conforming

to IS:4992 with necessary screws etc. complete :

9.66.1 125 mm EACH 86.00 27.20 2339.20

DSR Item No.


9.68 6.07 Providing and fixing oxidised M.S. casement stays (straight pegtype) with necessary screws etc. complete.

9.68.3 200 mm weighing not less than 120 gms EACH 6.00 27.35 164.10

9.84 6.08 Providing and fixing aluminium extruded section body tubular typeuniversal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 36 kg to 80 kg anddoor width from 701 mm to 1000 mm), with double speedadjustment with necessary accessories and screws etc. complete.

EACH 260.00 1027.20 267072.00

9.97 6.09 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyedto required colour or shade, with necessary screws etc. complete :

9.97.3 6.09.1 200x10 mm EACH 572.00 76.40 43700.809.97.4 6.09.2 150x10 mm EACH 1115.00 62.75 69966.25

9.100 6.10 Providing and fixing aluminium handles, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade, with necessaryscrews etc. complete :

9.100.1 125 mm EACH 881.00 66.95 58982.95

9.101 6.11 Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10 as perIS : 1868) transparent or dyed to required colour and shade, withnecessary screws etc. complete.

9.101.2 Twin rubber stopper EACH 377.00 80.20 30235.40

9.114 6.12 Providing and fixing magnetic catcher of approved quality in

cupboard / ward robe shutters, including fixing with necessaryscrews etc. complete.

9.114.2 Double strip (horizontal type) EACH 117.00 22.55 2638.35

9.130 6.13 Providing and fixing cup board shutters with 25 mm thick veneeredparticle board IS : 3097 marked, exterior grade (Grade I), ofapproved make, including IInd class teak wood lipping of 25 mmwide x 12 mm thick with necessary screws and bright finishedstainless steel piano hinges, complete as per direction of Engineer-in-Charge.

9.130.1 With decorative veneering on one side and commercial veneering

on other side SQM 261.14 1353.25 353393.12

DSR Item No.


9.136 6.14 Providing and fixing fire resistant door frame of section 143 x 57mm having built in rebate made out of 16 SWG G.I. sheet (zinccoating not less than 120 gm/sqm) duly filled with vermuculitebased concrete mix, suitable for mounting 60 minutes fire rateddoor shutters. The frame is fitted with intumuscent fire seal strip ofsize 10x4 mm (minimum) alround the frame and fixing with dashfastener of approved size and make, including applying a coat ofapproved brand fire resistant primer etc. complete as per directionof Engineer-in-charge (Dash fastener to be paid for separately).

MTR 430.00 1190.65 511979.50

9.137 6.15 Providing and fixing 50 mm thick glazed fire resistant door shuttersof 60 minutes fire rating conforming to IS:3614 (Part-II), tested andcertified as per laboratory approved by Engineer-in-charge, withsuitable mounting on door frame, consisting of vertical styles, lockrail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filledFR insulation material and fixing with necessary stainless steel ballbearing hinges of approved make, including applying a coat ofapproved fire resistant primer etc. all complete as per direction ofEngineer-in-charge (panneling to be paid for separately)

SQM 166.64 6205.05 1033978.51

9.138 6.16 Providing and fixing glazing in fire resistant door shutters, fixedpanels, ventilators and partitions etc., with G.I. beading ofappropriate size, made out of 20 SWG G.I.sheet (zinc coating notless than 120 gm/m2), fire resistant sealant, including applying acoat of approved fire resistant primer on G.I. beading etc., completeall as per direction of Engineer-in-charge.

9.138.1 With clear fire resistant glass panes 6mm thick of approved brand,

having minimum 60 minutes fire resistance SQM 142.95 26954.60 3853278.67

9.139 6.17 Providing and fixing panic bar / latch (Double point) fitted with asingle body, Trim Latch & Lock on back side of the Panic Latch ofreputed brand and manufacture to be approved by the Engineer- in-charge, all complete.

EACH 50.00 5892.30 294615.00

G 7.00 STEEL WORK

10.1 7.01 Structural steel work in single section, fixed with or withoutconnecting plate, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete.

KG 1264.40 66.85 84525.14

10.2 7.02 Structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steelprimer all complete. kg 3600.00 73.65 265140.00

DSR Item No.


10.5 7.03 Providing and fixing 1mm thick M.S. sheet door with frame of40x40x6 mm angle iron and 3 mm M.S. gusset plates at thejunctions and corners, all necessary fittings complete, includingapplying a priming coat of approved steel primer.

10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces SQM 67.62 2942.00 198938.04

10.6 7.04 Supplying and fixing rolling shutters of approved make, made of

required size M.S. laths, interlocked together through their entirelength and jointed together at the end by end locks, mounted onspecially designed pipe shaft with brackets, side guides andarrangements for inside and outside locking with push and pulloperation complete, including the cost of providing and fixingnecessary 27.5 cm long wire springs manufactured from hightensile steel wire of adequate strength conforming to IS: 4454 - part1 and M.S. top cover of required thickness for rolling shutters.

10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover SQM 50.75 2044.15 103744.70

10.7 7.05 Providing and fixing ball bearing for rolling shutters. EACH 8.00 436.45 3491.60

10.8 7.06 Extra for providing mechanical device chain and crank operation for

operating rolling shutters. 10.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area SQM 50.75 665.50 33775.46

10.9 7.07 Extra for providing grilled rolling shutters manufactured out of 8 mm

dia M.S. bar instead of laths as per design approved by Engineer-in-charge, (area of grill to be measured).

SQM 50.75 313.60 15915.83

10.13 7.08 Providing and fixing T-iron frames for doors, windows andventilators of mild steel Tee-sections, joints mitred and welded,including fixing of necessary butt hinges and screws and applying apriming coat of approved steel primer.

10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement

cconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size)

KG 409.50 81.95 33558.53

10.27 7.09 Providing and fixing carbon steel galvanised (minimum coating 5micron) dash fastener of 10 mm dia double threaded 6.8 grade(yield strength480 N/mm2), counter sunk head, comprising of 10 m dia polyamidePA 6 grade sleeve, including drilling of hole in frame , concrete/masonry, etc. as per direction of Engineer-in-charge.

10.27.3 10 x 120 mm EACH 594.00 82.45 48975.30

DSR Item No.


10.28 7.10 Providing and fixing stainless steel ( Grade 304) railing made ofHollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) andfitting the same with necessary stainless steel nuts and boltscomplete, i/c fixing the railing with necessary accessories &stainless steel dash fasteners , stainless steel bolts etc., of requiredsize, on the top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge, ( for paymentpurpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.).

KG 7211.62 611.10 4407020.98

10.30 7.11 Providing & fixing glass panes with putty and glazing clips in steeldoors, windows, clerestory windows, all complete with :

10.30.2 5.5 mm thick glass panes SQM 38.94 944.90 36794.41

H 8.00 FLOORING

11.4 8.01 52 mm thick cement concrete flooring with concrete hardenertopping, under layer 40 mm thick cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) andtop layer 12 mm thick cement hardener consisting of mix 1:2 (1cement hardener mix : 2 graded stone aggregate 6 mm nominalsize) by volume, hardening compound mixed @ 2 litre per 50 kg ofcement or as per manufacturer’s specifications. This includes costof cement slurry, but excluding the cost of nosing of steps etc.complete.

SQM 3945.18 480.10 1894081.91

11.6 8.02 Cement plaster skirting up to 30 cm height, with cement mortar 1:3(1 cement : 3 coarse sand), finished with a floating coat of neatcement.

11.6.1 18 mm thick SQM 394.52 299.20 118039.85

11.20 8.03 Chequerred precast cement concrete tiles 22 mm thick in footpath& courtyard, jointed with neat cement slurry mixed with pigment tomatch the shade of tiles, including rubbing and cleaning etc.complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4coarse sand).

11.20.1 Light shade pigment using white cement SQM 940.80 1008.70 948984.96

11.22 8.04 Tile work in skirting, risers of steps and dado up to 2 m height over

12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand)and jointed with grey cement slurry @ 3.3 kg/sqm, includingpointing inwhite cement mixed with pigment of matching shade complete.

11.22.1 Marble tiles (polished) Raj Nagar White

11.22.1.1 8 mm thick SQM 247.32 830.05 205285.48

DSR Item No.


11.23 8.05 Marble stone flooring with 18 mm thick marble stone, as per sampleof marble approved by Engineer-in-charge, over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with grey cement slurry, including rubbing and polishingcomplete with :

11.23.5 Udaipur green marble SQM 5010.57 1555.90 7795938.39

11.24 8.06 Extra for pre finished nosing to treads of steps of marble stone.

MTR 1717.94 248.90 427595.27

11.25 8.07 Extra for marble stone flooring in treads of steps and risers usingsingle length up to 3.00 metre . SQM 770.51 289.65 223176.77

11.26 8.08 Kota stone slab flooring over 20 mm (average) thick base laid over

and jointed with grey cement slurry mixed with pigment to match theshade of the slab, including rubbing and polishing complete withbase of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

11.26.1 25 mm thick SQM 1715.30 1071.70 1838290.39

11.27 8.09 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed withpigment to match the shade of the slabs, including rubbing andpolishing complete.

SQM 171.53 1100.85 188829.15

11.33 8.10 25 mm wooden planking, tongued and grooved in flooring, includingfixing with iron screws complete with:

11.33.1 Second class teak wood SQM 45.13 3192.10 144043.51

11.36 8.11 Providing and fixing Ist quality ceramic glazed wall tiles conformingto IS: 15622 (thickness to be specified by the manufacturer), ofapproved make, in all colours, shades except burgundy, bottlegreen, black of any size as approved by Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm, including pointing in white cement mixedwith pigment of matching shade complete.

SQM 2879.34 793.60 2285043.91

11.37 8.12 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 15622 of approved make in colours such asWhite, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand), including pointing the jointswith white cement and matching pigment etc., complete.

SQM 137.30 822.10 112878.28

11.41 8.13 Providing and laying vitrified floor tiles in different sizes (thicknessto be specified by the manufacturer) with water absorption less than0.08% and conforming to IS : 15622, of approved make, in allcolours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), including grouting the joints with whitecement and matching pigments etc., complete.

DSR Item No.


11.41.2 Size of Tile 600x600 mm SQM 7676.98 1402.55 10767348.30

11.46 8.14 Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 %and conforming to I.S. 15622, of approved make, in all colours &shade, in skirting, riser of steps, over 12 mm thick bed of cementmortar 1:3 (1 cement: 3 coarse sand), including grouting the jointwith white cement& matching pigments etc. complete.

11.46.2 Size of Tile 600x600 mm SQM 767.70 1411.45 1083567.34

11.53 8.15 Providing and fixing Glass mossaic tiles at finished plain wall / floor

surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixingin customize design as per direction of Engineer-in- Charge. Theglass mosaic tiles to be fixed on the wall surface with the help ofapproved adhesive applied at the rate of 2.5 kg per sqm andgrouting of the same. The rate is inclusive of all operation, materialand required pattern approved by Engineer-in-Charge:

SQM 220.58 1586.70 350001.12

11.54 8.16 Providing and fixing removable raised/false access flooring withsystem and its components of approved make for different plenumheight with possible height adjustment upto 50 mm, comprising ofmodular load bearing floor panels supported on G.I. rectangularstinger frame work and G.I. Pedestal etc. all complete, as per thearchitectural drawings, as specified and as directed by Engineer-in-charge consisting of :

a) Providing at required spacing to form modular framework,pedestals made out of GI tube of thickness minimum 2 mm and 25mm outer diameter, fully welded on to the G.I. Base plate of size100mmx100mmx3mm at the bottom of the pedestal tube, G.I.pedestal head of size 75mmx75mmx3.5 mm welded with GI fullythreaded stud 16mm outer diameter with two GI Check nutsscrewed on the stud for level adjustment upto 50mm, locking andstabilizing the pedestal head in position at the required level. Thepedestals shall be fixed to the subfloor (base) through base plateusing epoxy based adhesive of approved make or the machinescrew with rawl plug.

b) S tringers system in all steel construction hot dipped galvanizedof rectangular size 70x20x30x0.80mm thick having holes at bothends for securing the stringers on to the pedestal head using fullythreaded screws ensuring maximum lateral stability in all directions,the grid formed by the pedestal and stringer assembly shall receivethe floor panel, this system shall provide adequate solid, rigidsupport for access floor panel, the system shall provide a minimumclear uninterrupted clearance between the bottom of the floor forelectrical conduits and wiring etc. all complete as per thearchitectural drawings, as specified and as directed by the Engineer-in-charge.

DSR Item No.


c) P r oviding and fixing Access Floor panel of 600x600x32 mmmedium grade Filled Steel anti static high pressure Lamination of800H grade (FS800H). Access Floor panel shall be steel weldedconstruction with an enclosed bottom pan with uniform pattern of 64hemispherical cones. The top and bottom plates of Steel Gauges:top 0.6 mm and bottom 0.7 mm fused spot welded together(minimum 64 welds in each dome and 20 welds along each flange).The panel should be Corroresist epoxy coated for lifetime rustprotection and cavity formed by the top and bottom plate is filledwith Pyrogrip noncombustible Portland cementitiouscore mixed with lightweight foaming compound.

The access floor shall be factory finished with Anti-static HighPressure laminate with Non Warp technology upto 1mm thicknessfor superior adhesion and Surface flatness within 0.75mm.Thepanel is to withstand a Concentrated Load of 363 kgs applied onarea 25mm x 25mm without collapse in the centre of the panelwhich is placed on four steel blocks. The panel will withstand andUniformly Distributed Load (UDL) minimum 1250 kg/sqm and animpact load of 50kg all complete as per the approvedmanufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel toensure the quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) SQM 585.98 4002.80 2345579.16

I 9.00 ROOFING

12.1 9.01 Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, boltsand nuts 8 mm diameter with bitumen and G.I. limpet washersor with G.I. limpet washers filled with white lead, including acoat of approved steel primer and two coats of approved painton overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost ofpurlins, rafters and trusses and including cuttingto size and shape wherever required.

12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m²sqm 72.00 813.35 58561.20

12.21 9.02 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10 mm and down gauge),including finishing with cement mortar 1:3 (1 cement : 3 fine sand)as perstandard design :

12.21.1 In 75x75 mm deep chase MTR 855.16 127.95 109417.72

12.22 9.03 Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3coarse sand) and a coat of neat cement, rounding the edges andmaking and finishing the outlet complete.

EACH 31.00 167.45 5190.95

DSR Item No.


12.39. 9.04 Providing lead caulked joints to sand cast iron rain water pipes andfittings :

12.39.1 9.04.1 100 mm dia Pipe EACH 145.00 270.85 39273.2512.39.2 9.04.2 150 mm dia Pipe EACH 152.00 376.65 57250.80

12.40 9.05 Providing, fixing and embedding sand cast iron accessories for rain

water pipes in the masonry surrounded with 12 mm thick cementmortar of the same mix, as that of masonry (lead caulking will bepaid for separately) :

12.40.1 Sand cast iron plain shoes :

12.40.1.1 150 mm diameter EACH 12.00 412.15 4945.80

12.44 9.06 Providing and fixing to the inlet mouth of rain water pipe cast irongrating 15 cm diameter and weighing not less than 440 grams.

EACH 31.00 37.25 1154.75

12.52 9.07 Providing and fixing tiled false ceiling of approved materials of size595x595 mm in true horizontal level, suspended on inter lockingmetal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main "T" runnerwith suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main"T" at 600 mm center to center to form a grid of 1200x600 mm andsecondary cross "T" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum)sheet to be interlocked at middle of the 1200x600 mm panel to formgrids of 600x600 mm and wall angle of size 24x24x0.3 mm andlaying

false ceiling tiles of approved texture in the grid including, requiredcutting/making, opening for services like diffusers, grills, lightfittings, fixtures, smoke detectors etc. Main "T" runners to besuspended from ceiling using GI slotted cleats of size 27 x 37 x 25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dashfasteners, 4 mm GI adjustable rods with galvanised butterfly levelclips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to centeralong main T, bottom exposed width of 24 mm of all T-sections shallbe pre-painted with polyester paint, all complete for all heights asper specifications, drawings and as directed by Engineer-in-charge.

12.52.4 12.5 mm thick fully Perforated Gypsum Board tile made from

plasterboard having glass fibre conforming to IS: 2095 part I , ofsize 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/cwith center borders of 48

mm and the side borders of 30 mm, backed with non woven tissueon the back side, having an NRC ( Noise Reduction Coefficient) of0.79, with 50 mm resin bonded glass wool backing.

SQM 1213.63 1122.50 1362294.62

DSR Item No.


12.63 9.08 Providing and applying two coats of High Albedo paint havingminimum Solar Reflective Index (SRI) 108 (with solar reflectance &thermal emittance tested as per ASTM) C 1549 and ASTM C 1371respectively), VOC less than 10 cc/gm. The coating thickness andthe methodology of application shall strctly as per manufacturer'sspecifications and as approved by engineer In charge. Surfacepreparation includes cleaning with metal wire brush to remove alldust, fungus etc., washing with water all complete. The contractorshall give guarantee for the perfomance of SRI and also thedurabitity of coating, all complete as per direction of Engineer-in-incharge.

SQM 1465.11 249.70 365837.22

J 10.00 FINISHING 13.4.1 10.01 12 mm cement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand) SQM 26696.86 153.85 4107311.25

13.5. 10.02 15 mm cement plaster on rough side of single or half brick wall of

mix : 13.5.1 1:4 (1 cement: 4 coarse sand) SQM 15637.42 178.60 2792844.03

13.16 10.03 6 mm cement plaster of mix :

13.16.1 1:3 (1 cement : 3 fine sand) SQM 19631.63 120.35 2362666.43

13.22 10.04 Extra for plastering exterior walls of height more than 10 m fromground level for every additional height of 3 m or part thereof.

SQM 17819.45 34.95 622789.86

13.37 10.05 White washing with lime to give an even shade : 13.37.1 New work (three or more coats) SQM 10966.42 14.35 157368.12

13.45 10.06 Finishing walls with textured exterior paint of required shade :

13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and

including priming coat of exterior primer applied @ 2.20kg/10 sqm

SQM 8395.74 127.10 1067099.04

13.80 10.07 Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smoothcomplete.

SQM 50442.26 85.40 4307768.92

13.81 10.08 Distempering with 1st quality acrylic distemper, having VOC(Volatile Organic Compound ) content less than 50 grams/ litre, ofapproved brand and manufacture, including applying additionalcoats wherever required, to achieve even shade and colour.

13.81.2 Two coats SQM 42046.52 41.75 1755442.01

13.84 10.09 Painting with synthetic enamel paint, having VOC (Volatile Organic

Compound) content less than 150 grams/ litre, of approved brandand manufacture, including applying additional coats whereverrequired to achieve even shade and colour

13.84.2 Two coats SQM 397.99 67.00 26665.49

DSR Item No.


13.85 10.10 Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound )content.

13.85.1 10.10 With ready mixed pink or grey primer on wood work (hard and softwood) having VOC content less than 50 grams/ litre SQM 105.19 33.40 3513.42

13.85.2 10.10.2 With ready mixed red oxide zinc chromatic on steel / iron workshaving VOC content less than 250 grams/ litre SQM 48.60 28.75 1397.25

13.85.3 10.10.3 With water thinnable cement primer on wall surface having VOCcontent less than 50 grams/litre SQM 50512.46 31.55 1593668.08

11.00 DISMANTALLING & DEMOLISHING

15.2 11.01 Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

CUM 10.59 497.15 5264.22

15.7 11.02 Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar CUM 207.73 681.00 141462.33

15.12 11.03 Dismantling doors, windows and clerestory windows (steel or wood)

shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead :

15.12.1 11.03.1 Of area 3 sq. metres and below EACH 5.00 127.80 639.0015.12.2 11.03.2 Of area beyond 3 sq. metres EACH 5.00 175.50 877.50

15.58 11.04 Demolishing R.C.C. work by mechanical means and stockpiling at

designated locations and disposal of dismantled materials up to alead of 1 kilometre, stacking serviceable and unserviceable materialseparately including cutting reinforcement bars.

CUM 32.26 1264.70 40793.53

15.60 11.05 Disposal of surplus earth / building rubbish / malba / similarunserviceable, dismantled or waste materials by mechanicalmeans, including loading, transporting, unloading to approvedmunicipal dumping ground or as approved by Engineer-in-charge,beyond 50 m initial lead, for all leads including all lifts involved.

CUM 35387.02 123.85 4382682.43

12.00 ROAD WORK 16.1 12.01 Preparation and consolidation of sub grade with power road roller of

8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating with road rollerincluding making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth with lead upto 50 metres.

SQM 2362.13 73.55 173734.91

DSR Item No.


16.63 12.02 Providing, laying and making kerb channel 30 cm wide and 50 mmthick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 gradedstone aggregate 20 mm nominal size) over 75mm bed of dry brickballast 40 mm nominal size, well rammed and consolidated andgrouted with fine sand, including finishing the top smooth etc.complete and as per direction of Engineer-in-charge.

SQM 170.07 318.25 54125.73

16.69 12.03 Providing and laying at or near ground level factory made kerbstone of M-25 grade cement concrete in position to the requiredline, level and curvature, jointed with cement mortar 1:3 (1 cement:3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than5mm), including making drainage opening wherever requiredcomplete etc. as per direction of Engineer-in-charge (length offinished kerb edging shall be measured for payment). (Precast C.C.kerb stone shall be approved by Engineer-in-charge).

CUM 17.01 5236.95 89066.38

16.75 12.04 Providing and laying C.C. pavement of mix M-25 with ready mixedconcrete from batching plant. The ready mixed concrete shall belaid and finished with screed board vibrator , vacuum dewateringprocess and finally finished by floating, brooming with wire brushetc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).

CUM 472.43 6248.00 2951721.90

16.79 12.05 Providing, laying, spreading and compacting graded stoneaggregate (size range 53 mm to 0.075 mm ) to wet mix macadam(WMM) specification including premixing the material with water atOMC in mechanical mix plant, carriage of mixed material by tipperto site, for all leads & lifts, laying in uniform layers with mechanicalpaver finisher in sub- base / base course on well prepared surfaceand compacting with vibratory roller of 8 to 10 tonne capacity toachieve the desired density, complete as per specifications anddirections of Engineer-in-Charge.

CUM 354.32 2074.25 734948.28

16.91 12.06 Providing and laying factory made coloured chamfered edgeCement Concrete paver blocks of required strength, thickness &size/shape, made by table vibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed of finesand, compacting and proper embedding/laying of inter lockingpaver blocks into the sand bedding layer through vibratorycompaction by using plate vibrator, filling the joints with jamunasand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand in footpath, parks, lawns, driveways or light traffic parking etc. complete as per manufacturer'sspecifications & direction of Engineer-in-Charge. 60mm thick C.C.paver block of M-35 grade with approved colour, design & pattern.

SQM 1984.03 727.00 1442388.60

13.00 SANITARY INSTALLATIONS

DSR Item No.


17.1 13.01 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required :

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

with integral type foot rests EACH 27.00 3265.25 88161.75

17.7 13.02 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making goodthe walls wherever require :

17.7.2 White Vitreous China Wash basin size 630x450 mm with a single

15 mm C.P. brass pillar tap EACH 3.00 1903.25 5709.75

17.10 13.03 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required :

17.10.1 Kitchen sink with drain board

17.10.1.1 510x1040 mm bowl depth 250 mm EACH 1.00 6975.40 6975.40

17.11 13.04 Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P. brass chain with rubber plug, 40 mm C.P brasswaste and 40mm C.P. brass trap with necessary C.P. brass unionscomplete, including painting of fittings and brackets, cutting andmaking good the wall wherever required :

17.11.1 13.04.1 Size 450x300x150 mm EACH 8.00 2173.60 17388.8017.11.2 13.04.2 Size 600x450x200 mm EACH 18.00 2992.45 53864.10

17.31 13.05 Providing and fixing 600x450 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete.

EACH 12.00 762.55 9150.60

17.32 13.06 Providing and fixing mirror of superior glass (of approved quality)and of required shape and size with plastic moulded frame ofapproved make and shade with 6 mm thick hard board backing :

17.32.4 Rectangular shape 1500x450 mm EACH 108.00 1304.75 140913.00

17.33 13.07 Providing and fixing 600x120x5 mm glass shelf with edges round

off, supported on anodised aluminium angle frame with C.P. brassbrackets and guard rail complete fixed with 40 mm long screws,rawl plugs etc., complete.

EACH 66.00 522.20 34465.20

17.34 13.08 Providing and fixing toilet paper holder : 17.34.1 C.P. brass EACH 126.00 339.85 42821.10

17.35 13.09 Providing and fixing soil, waste and vent pipes :

17.35.1 100 mm dia 17.35.1.1 13.09.1 Sand cast iron S&S pipe as per IS: 1729 MTR 755.20 854.85 645582.72

DSR Item No.


17.35.2 75 mm diameter : 17.35.2.1 13.09.2 Sand cast iron S&S pipe as per IS: 1729 MTR 1410.00 705.55 994825.50

17.38 13.10 Providing and fixing bend of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

17.38.1 100 mm dia

17.38.1.1 13.10.01 Sand cast iron S&S as per IS - 1729 EACH 5.00 340.30 1701.5017.38.2 75 mm dia

17.38.2.1 13.10.2 Sand cast iron S&S as per IS - 1729 EACH 12.00 271.00 3252.00

17.39 13.11 Providing and fixing plain bend of required degree. 17.39.1 100 mm dia


17.39.2.1 13.11.2 Sand cast iron S&S as per IS -1729 EACH 55.00 218.75 12031.25

17.40 13.12 Providing and fixing heel rest sanitary bend 17.40.1 100 mm dia



17.44 13.13 Providing and fixing single equal plain junction of required degree :

17.44.1 100x100x100 mm

17.44.1.1 13.13.1 Sand cast iron S&S as per IS - 1729 EACH 45.00 549.35 24720.7517.44.2 75x75x75 mm


17.55 13.14 Providing and fixing door piece, insertion rubber washer 3mm thick,bolts & nuts complete :

17.55.1 100 mm 17.55.1.1 13.14.1 Sand cast iron S&S as per IS - 1729 EACH 5.00 512.20 2561.0017.55.2 75 mm


17.57 13.15 Providing and fixing collar : 17.57.1 100 mm

17.57.1.1 13.15.1 Sand cast iron S&S as per IS - 1729 EACH 25 192.80 4820.0017.57.2 75 mm


17.58 13.16 Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes and fittings of diameter :

17.58.1 13.16.1 100 mm EACH 532.00 232.30 123583.6017.58.2 13.16.2 75 mm EACH 1210.00 196.20 237402.00

17.59 13.17 Providing and fixing MS stays and clam ps for sand cast iron /

centrifugally cast (spun) iron pipes of diameter 17.59.1 13.17.1 100 mm EACH 205.00 67.35 13806.7517.59.2 13.17.2 75 mm EACH 256.00 56.15 14374.4017.59.3 13.17.3 50 mm EACH 35.00 51.25 1793.75

DSR Item No.


17.60 13.18 Providing and fixing trap of self cleansing design with screweddown or hinged grating with or without vent arm complete, includingcost of cutting and making good the walls and floors :

17.60.2 100 mm inlet and 75 mm outlet

17.60.2.1 Sand cast iron S&S as per IS - 3989 EACH 297.00 976.40 289990.80

17.61 13.19 Cutting chases in brick masonry walls for following diameter sandcast iron/ centrifugally cast (spun) iron pipes and making good thesame with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6graded stone aggregate 12.5 mm nominal size), includingnecessary plaster and pointing in cement mortar 1:4 (1 cement : 4coarse sand) :

17.61.1 13.19.1 100 mm dia MTR 35.00 302.60 10591.0017.61.2 13.19.2 75 mm dia MTR 55.00 216.60 11913.00

17.65 13.20 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste

vent pipes and fittings with two coats of synthetic enamel paint ofany colour such as chocolate grey, or buff etc. over a coat of primer(of approved quality) for new work :

17.65.1 13.20.1 100 mm diameter pipe MTR 523.00 33.85 17703.5517.65.2 13.20.2 75 mm diameter pipe MTR 1410.00 25.90 36519.00

17.70 13.21 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.2 2Bottle trap 38 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the wastecoupling, 77 mm breadth with 25 mm minimum water seal, weighingnot less than 263 gms

EACH 275.00 440.75 121206.25

17.71 13.21 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape withbracket of the same materials with snap fittings of approved qualityand colour, weighing not less than 105 gms.

EACH 66.00 181.75 11995.50

17.73 13.22 Providing and fixing PTMT towel rail complete with brackets fixed towooden cleats with CP brass screws with concealed fittingsarrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm

and effective height of 88 mm, weighing not less than 190 gms

EACH 66.00 448.40 29594.40

17.78 13.23 Providing and fixing white vitreous china extended wall mountingwater closet of size 780x370x690 mm of approved shape includingproviding & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etccomplete.

EACH 99.00 9965.25 986559.75

DSR Item No.


17.80 13.24 Providing and fixing white vitreous china battery based infraredsensor operated urinal of approx. size 610 x 390 x 370 mm havingpre & post flushing with water (250 ml & 500 ml consumption),having water inlet from back side, including fixing to wall withsuitable brackets all as per manufacturers specification anddirection of Engineer-in-charge.

EACH 126.00 16681.05 2101812.30

14.00 WATER SUPPLY 18.7 14.01 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge.

18.7.3 14.01.1 25 mm nominal outer dia pipes METRE 450.00 222.90 100305.0018.7.4 14.01.2 32 mm nominal outer dia pipes METRE 116.00 287.10 33303.6018.7.5 14.01.3 40 mm nominal outer dia pipes METRE 112.00 395.60 44307.2018.7.6 14.01.4 40 mm nominal outer dia pipes METRE 275.00 569.20 156530.00

18.8 14.02 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as perdirection of Engineer in Charge.

18.8.1 14.02.1 15 mm dia nominal outer pipes METRE 645.00 254.95 164442.7518.8.2 14.02.2 20 mm dia nominal outer pipes METRE 242.00 281.35 68086.7018.8.3 14.02.3 25 mm nominal outer dia Pipes METRE 60 336.25 20175.0018.8.4 14.02.4 32 mm dia nominal outer pipes METRE 124.00 407.40 50517.60

18.9 14.03 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement ,trenching ,refilling &testing ofjoints complete as per direction of Engineer in Charge.

18.9.6 50 mm nominal outer dia Pipes METRE 20.00 517.20 10344.00

18.15 14.04 Providing and fixing brass bib cock of approved quality

18.15.1 15 mm nominal bore EACH 70.00 259.85 18189.50

18.16 14.05 Providing and fixing brass stop cock of approved quality : 18.16.1 15 mm nominal bore EACH 150.00 259.85 38977.50

18.17 14.06 Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end) :

18.17.1 14.06.1 25 mm nominal bore EACH 4.00 427.80 1711.2018.17.3 14.06.2 40 mm nominal bore EACH 6.00 584.20 3505.2018.17.4 14.06.3 50 mm nominal bore EACH 5.00 749.40 3747.00

DSR Item No.


18.18 14.07 Providing and fixing ball valve (brass) of approved quality, High orlow pressure, with plastic floats complete :


18.21 14.08 Providing and fixing uplasticised PVC connection pipe with brassunions :

18.21.1 30 cm length EACH 132.00 58.95 7781.40

18.27 14.09 Providing and laying S&S centrifugally cast (spun) iron pipes (ClassLA) conforming to IS - 1536 :

18.27.1 100 mm dia pipe MTR 595.00 1072.70 638256.50

18.31 14.10 Providing and fixing C.I. sluice valves (with cap) complete withbolts, nuts, rubber insertions etc. (the tail pieces if required will bepaid separately) :

18.31.1 80 mm diameter (Class I) EACH 7.00 3285.75 23000.25

18.32 14.11 Constructing masonry Chamber 30x30x50 cm inside, in brick workin cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, withC. I. surface box 100x100 x75 mm (inside) with hinged cover fixedin cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size), i/c necessaryexcavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10graded stone aggregate 40mm nominal size ) and inside plasteringwith cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick,finished with a floating coat of neat cement complete as perstandard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5 EACH 10.00 1101.70 11017.00

18.33 14.12 Constructing masonry Chamber 60x60x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size ) , i/c necessary excavation, foundation concrete1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mmnominal size) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12 mm thick, finished with a floating coat ofneat cement complete as per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class


18.28 14.13 Providing lead caulked joints to spun iron or C.I. pipes and specials,including testing of joints but excluding the cost of pig lead :

18.28.1 100 mm diameter pipe EACH 135.00 187.10 25258.50

18.53 14.14 Providing and fixing C.P. brass angle valve for basin mixer and

geyser points of approved quality conforming to IS:8931 a) 15 mmnominal bore EACH 271.00 506.70 137315.70

DSR Item No.


18.56 14.15 Providing and fixing PTMT pillar cock of approved quality andcolour

18.56.1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

EACH 15.00 204.55 3068.25

18.51 14.16 Providing and fixing C.P. brass long body bib cock of approvedquality conforming to IS standards and weighing not less than 690gms.


15.00 DRAINAGE WORKS 19.1 15.01 Providing, laying and jointing glazed stoneware pipes class SP-1

with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :

19.1.1 15.01.1 100 mm diameter METRE 43.00 197.60 8496.8019.1.2 15.01.2 150 mm diameter METRE 15.00 301.90 4528.5019.1.3 15.01.3 200 mm diameter METRE 11.00 447.25 4919.7519.1.4 15.01.4 250 mm diameter METRE 117.00 676.75 79179.75

19.2 15.02 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) all-roundS.W. pipes including bed concrete as per standard design :

19.2.1 15.02.1 100 mm diameter S.W. pipe METRE 43.00 543.55 23372.6519.2.2 15.02.2 150 mm diameter S.W. pipe METRE 15.00 664.80 9972.00

19.3 15.03 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) up tohaunches of S.W. pipes including bed concrete as per standarddesign :

19.3.3 15.03.1 200 mm diameter S.W. pipe METRE 11.00 492.15 5413.6519.3.4 15.03.2 250 mm diameter S.W. pipe METRE 117.00 572.95 67035.15

19.4 15.04 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tightC.I. cover with frame of 300 x300 mm size (inside) the weight ofcover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design :

19.4.1 100x100 mm size P type

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 EACH 11.00 1520.90 16729.90

19.6 15.05 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing of jointsetc. complete :

19.6.2 15.05.1 150 mm dia. R.C.C. pipe METRE 72.00 340.35 24505.2019.6.3 15.05.2 250 mm dia. R.C.C. pipe METRE 190.00 455.90 86621.0019.6.4 15.05.3 300 mm dia. R.C.C. pipe METRE 58.00 494.35 28672.3019.6.5 15.05.4 450 mm dia. R.C.C. pipe METRE 79.00 688.90 54423.10

DSR Item No.


19.7 15.06 Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominalsize), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)finished with floating coat of neat cement and making channels incement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) finished with a floating coat of neatcement complete as per standard design :

19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with

frame (medium duty) 500 mm internal diameter, total weight ofcover and frame to be not less than 116 kg (weight of cover 58 kgand weight of frame 58 kg) :

19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class


19.16 15.07 Providing orange colour safety foot rest of minimum 6 mm thickplastic encapsulated as per IS : 10910, on 12 mm dia steel barconforming to IS : 1786, having minimum cross section as 23mmx25 mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besidesnecessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bendtest and chemical resistance test as per specifications and havingmanufacture's permanent identification mark to be visible even afterfixing, including fixing in manholes with 30x20x15 cm cementconcrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size) complete as per design.

EACH 162.00 295.20 47822.40

19.18 15.08 Supplying and fixing C.I. cover with frame for manholes : 19.18.1 15.08.1 455x610 mm rectangular C.I. cover (light duty) the weight of the

cover to be not less than 23 kg weight of frame 15 Kg EACH 3.00 2010.70 6032.10

19.18.2 15.08.2 500 mm diameter C.I. cover (medium duty) the weight of the coverto be not less than 58 kg weight of frame 58 Kg EACH 1.00 5478.90 5478.90

19.27 15.09 Constructing brick masonry road gully chamber 50x45x60 cm with

bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including500x450 mm pre-cast R.C.C. horizontal grating with framecomplete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class


DSR Item No.


19.30 15.10 Constructing brick masonry chamber for underground C.I.inspection chamber and bends with bricks in cement mortar 1:4 (1cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size), foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand), finished smooth with a floating coat ofneat cement on walls and bed concrete etc. complete as perstandard design :

19.30.2 15.10.1 Inside dimensions 500x700 mm and 45 cm deep for pipe line with

one or two inlets : 19.30.2.1 With common burnt clay F.P.S. (non modular) bricks of class


19.30.3 15.10.2 Inside dimensions 600x 850 mm and 45 cm deep for pipe line withthree or more inlets :

19.30.3.1 With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 EACH 6.00 5967.85 35807.10

19.31 15.10.3 Extra for depth beyond 45 cm of brick masonry chamber :

19.31.2 For 500x700 mm size 19.31.2.1 With common burnt clay F.P.S. (non modular) bricks of class


16.00 ALUMINIUM WORK 21.1 16.01 Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 16.01.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating50 micron) KG 15660.00 373.00 5841180.00

21.1.2 16.01.2 For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittingswherever required including the cost of EPDM rubber / neoprenegasket required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating

50 micron) KG 6418.00 427.60 2744336.80

DSR Item No.


21.2 16.02 Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors,windows shutters and partition frames with C.P. brass / stainlesssteel screws etc. complete as per architectural drawings anddirections of engineer-in-charge.

21.2.2 Pre-laminated particle board with decorative lamination on both

sides SQM 527.14 1066.00 561931.24

21.3 16.03 Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paidin basic item):

21.3.2 With float glass panes of 5.50 mm thickness SQM 2479.99 1009.00 2502309.91

21.4 16.04 Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS : 6315, having brand logoembossed on the body / plate with double spring mechanism anddoor weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the samematching to the existing floor finishing and cover plates with brasspivot and single piece M.S. sheet outer box with slide plate etc.complete as per the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

EACH 68.00 2020.05 137363.40

21.8 16.05 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and direction ofEngineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width MTR 6856.03 83.05 569393.29

21.11 16.06 Providing and fixing stainless steel (SS 304 grade) adjustable

friction windows stays of approved quality with necessary stainlesssteel screws etc. to the side hung windows as per direction ofEngineerin- charge complete.

21.11.1 205 X 19 mm EACH 382.00 212.35 81117.70

21.12 16.07 Providing and fixing aluminium tubular handle bar 32 mm outer dia,

3.0 mm thick & 2100 mm long with SS screws etc .complete as perdirection of Engineer-in-Charge.

21.12.2 Powder coated minimum thickness 50 micron aluminium tubularhandle bar EACH 70.00 507.90 35553.00

21.13 16.08 Providing and fixing 100mm brass locks (best make of approved

quality) for aluminium doors including necessary cutting and makinggood etc. complete. EACH 304.00 386.80 117587.20

21.16 16.09 Providing and fixing aluminium round shape handle of outer dia

100mm with SS screws etc. complete as per direction of Engineerin-charge

DSR Item No.


21.16.2 Powder coated minimum thickness 50 micron aluminium EACH 772.00 67.50 52110.00

21.18 16.10 Providing and fixing 12 mm thick frameless toughened glass doorshutter of approved brand and manufacture, including providing andfixing top & bottom pivot & spring type fixing arrangement andmaking necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge (Door handle, lockand stopper etc.to be paid separately).

SQM 20.16 4692.70 94604.83

17.00 WATER PROOFING 22.7 17.01 Providing and laying integral cement based water proofing

treatment including preparation of surface as required for treatmentof roofs, balconies, terraces etc consisting of following operations:a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS.2645 and approved by Engineer-in-charge over the RCC slabincluding adjoining walls upto 300 mm height including cleaning thesurface before treatment. b) Laying brick bats with mortar usingbroken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5coarse sand) admixed with water proofing compound conforming toIS : 2645 and approved by Engineer-in-charge over 20 mm thicklayer of cement mortar of mix 1:5 (1 cement :5 coarse sand )admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge to required slope and treatingsimilarly the adjoining walls upto 300 mm height including roundingof junctions of walls and slabs c) After two days of proper curingapplying a second coat of cement slurry using 2.75 kg/ sqm ofcement admixed with water proofing compound conforming to IS :2645 and approved by Engineer-in-charge. d) Finishing the surfacewith 20 mm thick

jointless cement mortar of mix 1:4 (1 cement :4 coarse sand)admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge including laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing thesurface with trowel with neat cement slurry and making pattern of300x300 mm square 3 mm deep. e) The whole terrace so finishedshall beflooded with water for a minimum period of two weeks for curingand for final test. All above operations to be done in order and asdirected and specified by the Engineer-in-Charge :

22.7.1 With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. SQM 2377.49 882.60 2098376.51

18.00 HORTICULTURE & LANDSCAPING

23.2 18.01 Supplying and stacking of good earth at site including royaltyandcarriage up to 1 km (earth measured in stacks will be reducedby 20% for payment). Cum 138.63 308.35 42745.27

DSR Item No.


23.8 18.02 Spreading of sludge, dump manure and / or good earth in requiredthickness as per direction of Officer-in-charge (Cost of sludge,dump manure and / or good earth to be paid separately).

Cum 277.25 25.15 6972.88

23.9 18.03 Mixing earth and sludge or manure in the required proportionspecified or directed by the Officer-in-charge. Cum 277.25 17.25 4782.59

23.10 18.04 Grassing with selection No.1 grass including watering and

maintenance of the lawn for 30 days or more till the grass forms athick lawn, free from weeds and fit for mowing including supplyinggood earth, if needed (the good earth shall be paid for separately).

23.10.2 With grass Turf 100 Sqm 1533.85 634.30 9729.18

23.12 18.05 Uprooting rank vegetation and weeds by digging the area to a depth

of 60cm, removing all weeds and other growth with roots by forkingrepeatedly, breaking clods, rough dressing, flooding with water,uprooting fresh growths after 10 to 15 days and then fine dressingfor planting new grass, including disposal of all rubbish with allleads and lifts.

100 Sqm 1533.85 2887.60 44291.33

23.13 18.06 Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixingwith sludge or manure in the ratio of 8:1 (8 parts of stacked volumeof earth after reduction by 20% : one part of stacked volume ofsludge or manure after reduction by 8%), flooding with water, fillingwith earth if necessary, watering and finally fine dressing, levelingetc. including stacking and disposal of materials declaredunserviceable and surplus earth by spreading and leveling asdirected, within a lead of 50 m, lift up to 1.5 m complete (cost ofsludge, manure or extra earth to be paid for separately).

Cum 992.01 105.20 104359.89

23.14 18.07 Digging holes in ordinary soil and refilling the same with theexcavated earth mixed with manure or sludge in the ratio of 2:1 byvolume (2 parts of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) floodingwith water, dressing including removal of rubbish and surplus earth,if any, with all leads and lifts (cost of manure, sludge or extra goodearth if needed to be paid for separately) :

23.14.2 18.07.1 Holes 90 cm dia, and 90 cm deep Each 165.00 90.90 14998.5023.14.3 18.07.2 Holes 60 cm dia, and 60 cm deep Each 455.00 28.00 12740.0023.14.4 18.07.3 Holes 45 cm dia, and 45 cm deep Each 580.00 12.15 7047.00

DSR Item No.


23.16 18.08 Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 mhigh, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6mm M.S. flat iron rings in two halves, fixing together at site withrequired six numbers of 8 mm dia. and 30 mm long bolts, includingpainting two coats with synthetic enamel paint of approved brandand manufacture over a coat of primer. One name plate of 1 mmthick M.S. sheet of size 250x100 mm shall be welded to the treeguard near the middle height and lettered CPWD / PWD/ any otherapproved name. The tree guard shall be suitably fixed to the groundby embedding four legs of tree guard in pits of suitable dia and to adepth of 25 cm, refilling the pits with soil and ramming, complete inall respect as per satisfaction and direction of Officer-in-charge.

Each 165.00 2884.15 475884.75

23.25 18.09 Supplying and stacking of well decayed cow dung manure at siteincluding royalty and carriage upto 1 km (Cow dung manuremeasured in stacks will reduced by 8% for Payment).

Cum 138.63 190.40 26394.35

19.00 RAIN WATER HARVESTING 24.1 19.01 Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collectingsamples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as perdirection of Engineer -in-charge, upto 90 metre depth below groundlevel.

24.1.1 All types of soil

24.1.1.3 400 mm dia MTR 76.00 557.55 42373.80

24.3 19.02 Supplying, assembling, lowering and fixing in vertical position inbore well, unplasticized PVC medium well casing (CM) pipe ofrequired dia, conforming to IS: 12818, including required hire andlabour charges, fittings & accessories etc. all complete, for alldepths, as per direction of Engineer -in-charge.

24.3.3 200 mm nominal size dia MTR 54.00 878.25 47425.50

24.4 19.03 Supplying, assembling, lowering and fixing in vertical position in

bore well unplasticized PVC medium well screen (RMS) pipes withribs, conforming to IS: 12818, including hire & labour charges,fittings & accessories etc. all complete, for all depths, as perdirection of Engineer-in-charge.

24.4.3 200 mm nominal size dia MTR 30.00 820.45 24613.50

24.5 19.04 Supplying, filling, spreading & leveling stone boulders of size range

5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge.

CUM 14.14 494.75 6995.77

DSR Item No.


24.6 19.05 Supplying, filling, spreading & leveling gravels of size range 5 mmto 10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge.

CUM 8.48 901.25 7642.60

24.7 19.06 Supplying, filling, spreading & leveling coarse sand of size range1.5 mm to 2 mm in recharge pit, in required thickness over gravellayer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

CUM 21.20 843.20 17875.84

24.13 19.07 Providing and fixing suitable size threaded mild steel cap or spotwelded plate to the top of bore well housing/ casing pipe, removableas per requirement, all complete for borewell of:

24.13.3 200 mm dia EACH 2.00 243.90 487.80

24.15 19.08 Providing and fixing Bail plug/ Bottom plug of required dia to the

bottom of pipe assembly of tubewell as per IS:2800 (part I).

24.15.3 200 mm dia EACH 2.00 265.10 530.20

20.00 STRUCTURAL GLAZING

26.8 20.01 "Design supply & installation of suspended Spider Glazing systemdesigned to withstand the wind pressure as pr IS 875 (Part-III). TheSuspended System held with Spider Fittings of SS-316 Grade Steelof approved manufacturer with glass panel having 12 mm thickclear toughened glass held together with SS- 316 Grade Stainlesssteel Spider & bolt assembly with laminated glass fins 21 mm thick.

The Glass fins and glass panel assembly shall be connected toSlab/beams by means of SS- 316 Grade stainless steel brackets &Anchor bolts and at the bottom using SS channel of 50x25x2mmusing fastener & anchor bolts, non staining weather sealants ofapproved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification andapproved drawings. The complete system to be designed toaccommodate thermal expansion & seismic movements etc. Thejoints between glass panels (6 to 8 mm) and gaps at the perimeter& in U channel of the assembly to be filled with non stainingweather sealant, so as to make the entire system fully water proof &dust proof.

The rate shall include all design, Engineering and shop drawingincluding approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporaryservices all fitting fixers nut bolts, washer, Buffer plates, fastener,anchors, SS channel laminated glass etc. all complete.

For the purpose of payment, actual elevation area of Glazingincluding thickness of joints and the portion of Glass panel insidethe SS channel shall be measured. SQM 303.30 3429.90 1040289.36

Total cost of DSR Item (Civil) of Schedule - A 444573184.56

DSR Item No.


1.00 WIRING

1.3 1.01 Point wiring in steel conduit, with modular type switch. Wiring forlight point / fan point / exhaust fan point / call bell point / with 1.5 sq.mm FR PVC insulated copper conductor single core cable insurface / recessed STEEL conduit, with modular switch, modularplate, suitable GI box and earthing the point with 1.5 sq.mm FRPVC insulated copper conductor single core cable etc as required.

1.3 3 (iii) Group C Nos 2764.00 1011.00 2794404.00

1.7 1.02 Wiring for circuit / submain wiring alongwith earth wire with thefollowing sizes of FR PVC insulated copper conductor, single corecable in surface / recessed steel conduit as required.

1.7.1 1.02.1 2 x 1.5 Sq.mm.+ 1x 1.5 Sq.mm earth wire Mtrs 7000.00 183.00 1281000.00

1.7.2 1.02.2 2 x 2.5 Sq.mm.+ 1 x 2.5 Sq.mm earth wire Mtrs 6800.00 207.00 1407600.00

1.7.3 1.02.3 2x4.0 Sq.mm. + 1 x 4.0 Sq.mm earth wire Mtrs 4600.00 238.00 1094800.00

1.7.5 1.02.4 2 X 10 sq. mm + 1 X 10 sq. mm earth wire Mtrs 1000.00 409.00 409000.00





1.14 1.03 Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FR PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired

For indoor units

1.14.3 1.03.1 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire Metre 300 171.00 51300.00

For outdoor units

1.14.10 1.03.2 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Metre 15 575.00 8625.00

1.14.11 1.03.3 4 X 16 sq. mm + 2 X 16 sq. mm earth wire Metre 60 803.00 48180.00

1.17 1.04 Supplying and drawing following sizes of FR PVC insulated copperconductor, single core cable in the existing surface / recessed steel/PVC conduit as required.

1.17.1 1.04.1 1X1.5 Sq. mm Mtrs 6800 21.00 142800.00

1.17.2 1.04.2 2X1.5 Sq. mm Mtrs 6300 35.00 220500.00

1.17.3 1.04.3 3X1.5 Sq. mm Mtrs 6636.00 52.00 345072.00

1.17.4 1.04.5 4 x 1.5 Sq. mm Metre 200 66.00 13200.00

DSR SCHEDULE ITEMS (ELECTRICAL) SCHEDULE -B

DSR Item No.


1.17.5 1.04.5 5X1.5 Sq. mm Mtrs 1000.00 83.00 83000.00

1.17.11 1.04.6 2X2.5 Sq. mm Mtrs 1200.00 51.00 61200.00

1.17.12 1.04.7 3X2.5 Sq. mm Mtrs 4100.00 77.00 315700.00

1.17.14 1.04.8 5X2.5 Sq. mm Mtrs 1000 124.00 124000.00

1.17.20 1.04.9 2X4.0 Sq. mm Mtrs 300.00 79.00 23700.00

1.17.21 1.04.10 3X4.0 Sq. mm Mtrs 4200.00 111.00 466200.00

1.17.23 1.04.11 5X4.0 Sq. mm Mtrs 600.00 176.00 105600.00

1.17.29 1.04.12 2X6.0 Sq. mm Mtrs 800.00 103.00 82400.00

1.18 1.05 Supplying and drawing following pair 0.5 sq mm FR PVC insulatedannealed copper conductor, unarmored telephone cable in theexisting surface/ recessed steel/ PVC conduit as required.

1.18.2 2 Pair Mtrs 4200.00 17.00 71400.00

1.19 1.06 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copperbraid and protected with PVC sheath in the existing surface/recessed steel/ PVC conduit as required. Mtrs 3600.00 23.00 82800.00

1.20 1.07 Supply & fixing of following size welded conduit pipe along with

accessories in surface / recess including painting incase of surfaceconduit cutting the wall and making good the same incase ofrecessed conduit as required.

1.20.1 1.07.1 20 mm dia Mtrs 2800.00 131.00 366800.00

1.20.2 1.07.2 25 mm dia Mtrs 4200.00 152.00 638400.00

1.20.3 1.07.3 32 mm dia Mtrs 900.00 203.00 182700.00

1.20.4 1.07.4 40mm dia Mtrs 500.00 301.00 150500.00

1.21 1.08 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the walland making good the same in case of recessed conduit as required.

1.21.1 1.08.1 20 mm Mtrs 2800.00 64.00 179200.00

1.21.2 1.08.2 25 mm Mtrs 9800.00 72.00 705600.00

1.21.3 1.08.3 32 mm Mtrs 2000.00 91.00 182000.00

1.21.4 1.08.4 40 mm Mtrs 800.00 117.00 93600.00

DSR Item No.


1.22 1.09 Supplying and fixing metal box of following sizes (nominal size) onsurface or in recess with suitable size of phenolic laminated sheetcover in front including painting etc as required.

1.22.7 200 mm X 150 mm X 60 mm deep Nos 55.00 174.00 9570.00

1.24 1.10 S&E of following modular switch / socket on existing modular plateand switch box including connections but excluding modular platesetc. as required

1.24.1 1.10.1 5/6 Amp switch Nos 2363.00 77.00 181951.00

1.24.3 1.10.2 15/16 Amp switch Nos 300.00 114.00 34200.00

1.24.4 1.10.3 3 pin 5/6 Amp socket outlet Nos 2493.00 101.00 251793.00

1.24.5 1.10.4 6 pin 15/16 amp socket outlet Nos 300.00 163.00 48900.00

1.24.6 1.10.5 Telephone socket outlet Nos 180.00 92.00 16560.00

1.24.7 1.10.6 TV antenna socket outlet Nos 20.00 94.00 1880.00

1.24.8 1.10.7 Bell push Nos 30.00 105.00 3150.00

1.25 1.11 Supplying and fixing stepped type electronic fan regulator on the

existing modular plate switch box including connections butexcluding modular plate etc. as required. Nos 626.00 362.00 226612.00

1.26 1.12 Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required.

Nos 100.00 23.00 2300.00

1.27 1.13 Supply and fixing of following size / modules GI box along withmodular base & cover plate for modular switches in recess etc. asrequired

1.27.1 1.13.1 1 or 2 Module (75mmX75mm) Nos 800.00 159.00 127200.00

1.27.2 1.13.2 3 Module (100mmX75mm) Nos 800.00 172.00 137600.00

1.27.3 1.13.3 4 Module (125mmX75mm) Nos 300.00 197.00 59100.00

1.27.4 1.13.4 6 Module (200mmX75mm) Nos 200.00 241.00 48200.00

1.27.5 1.13.5 8 Module (125mmX125mm) Nos 591.00 271.00 160161.00

1.27.6 1.13.6 12 Module (200mmX150mm) Nos 130.00 365.00 47450.00

1.28 1.14 Supplying and fixing following Modular base & cover plate on

existing modular metal boxes etc. as required.

1.28.1 1.14.1 1 or 2 Module Nos 800.00 73.00 58400.00

1.28.2 1.14.2 3 Module Nos 800.00 82.00 65600.00

DSR Item No.


1.28.3 1.14.3 4 Module Nos 300.00 91.00 27300.00

1.28.4 1.14.4 6 Module Nos 200.00 109.00 21800.00

1.28.5 1.14.5 8 Module Nos 591.00 135.00 79785.00

1.28.6 1.14.6 12 Module Nos 130.00 183.00 23790.00

1.31 1.15 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and fixing3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch,connection etc. as required. (For light plugs to be used in nonresidential buildings).

Nos 779.00 320.00 249280.00

1.32 1.16 Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing and fixing6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 ampsmodular switch, connection etc. as required.

Nos 322.00 411.00 132342.00

1.33 1.17 Supplying and fixing 3 pin, 5 amp ceiling rose on the existingjunction box/ wooden block including connection etc as required.

Nos 200.00 42.00 8400.00

1.34 1.18 Supplying and fixing brass batten/ angle holder includingconnection etc. as required. Nos 100.00 64.00 6400.00

1.38 1.19 Supplying and fixing call bell/ buzzer suitable for single phase, 230

volts, complete as required. Nos 30.00 42.00 1260.00

1.39 1.20 Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible,FRLS PVC insulated, copper cable, in PVC sleeve of suitablesizeon the floor/ wall, or side of the table/ door etc. as required.

Mtrs 4600.00 20.00 92000.00

1.40 1.21 Providing and fixing plain 16/0.20mm (0.50sqmm) twin circularflexible FRLS PVC insulated, PVC sheathed copper cable direct onthe wall with PVC clips etc. as required. Mtrs 2400.00 20.00 48000.00

1.41 1.22 Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting of all types, complete with allaccessories and tube etc. directly on ceiling/ wall, includingconnection with 1.5 sq. mm FR PVC insulated, copper conductor,single core cable and earthing etc. as required.

Nos 2314.00 82.00 189748.00

1.45 1.23 Installation, testing and commissioning of ceiling fan, includingwiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover on thefan box etc. as required.

Nos 626.00 87.00 54462.00

DSR Item No.


1.50 1.24 Installation of exhaust fan in the existing opening, including makinggood the damage, connection, testing, commissioning etc. asrequired.

1.50.1 Upto 450 mm sweep Nos 46.00 189.00 8694.00

1.51 1.25 Extra for fixing the louvers/ shutters complete with frame for aexhaust fan of all sizes. Nos 46.00 81.00 3726.00

1.53 1.26 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface / recessed steel / PVC conduit as required

mtrs 2400.00 31.00 74400.00

2.00 MCCB, MCB & DB’S

2.2 2.01 Providing and fixing following rating and breaking capacity MCCB inexisting cubicle panel board including drilling holes in cubicle panel,making connections, etc. as required.

2.2.1 2.01.1 100 Amp, 16 KA Nos 10.00 3032.00 30320.00

2.2.2 2.01.2 125 Amp, 16 KA Nos 9.00 4233.00 38097.00

2.2.9 2.01.3 400 Amp, 35 KA Nos 1.00 17942.00 17942.00

2.2.11 2.01.4 630 Amp, 50 KA Nos 1.00 21378.00 21378.00

2.7 2.02 Supplying and fixing following way prewired SP&N MCB distributionboard of steel sheet for 240 volts on surface/ recess complete withloose wire box, terminal connectors for all incoming and outgoingcircuits, duly prewired with suitable size FR PVC insulated copperconductor up to terminal blocks, tinned copper bus bar, neutral link,earth bar, din bar, detachable gland plate, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

2.7.5 2.02.1 2 + 8 way, Double door Nos 12.00 2844.00 34128.00

2.7.6 2.02.2 2 + 12 way, Double door Nos 24.00 3432.00 82368.00

2.8 2.03 Supplying and fixing following way prewired TP&N MCB distributionboard of steel sheet for 415 volts on surface/ recess complete withloose wire box, terminal connectors for all incoming and outgoingcircuits, duly prewired with suitable size FR PVC insulated copperconductor up to terminal blocks, tinned copper bus bar, neutral link,earth bar, din bar, detachable gland plate, interconnections, powderpainted including earthing etc. as required.(But without MCB/RCCB/ Isolator)

2.8.5 2.03.1 4 way (4 + 12), Double door Nos 19.00 6997.00 132943.00

2.8.7 2.03.2 8 way (4 + 24), Double door Nos 18.00 9899.00 178182.00

DSR Item No.


2.9 2.04 Supplying and fixing following way prewired vertical type TP&NMCB distribution board of steel sheet for 415 volts on surface/recess complete with loose wire box of sheet steel, dust protected,duly powder painted, inclusive of 200 amps tinned copper bus bar,common neutral link, earth bar, din bar for mounting MCB's,terminal connectors for all incoming and outgoing circuits, dulyprewired with adequate size of FR PVC insulated copper conductorupto the terminal connector/ neutral link, earthing etc as required(But without MCB/ RCCB/ Isolator). (Note : Prewired vertical typeMCB TPDB is normally used where 3 phase outlets are required.)

2.9.5 2.04.1 4 way Double door Nos 18.00 7515.00 135270.00

2.10 2.05 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.

2.10.1 2.05.1 SINGLE POLE Nos 936.00 146.00 136656.00

2.10.3 2.05.2 DOUBLE POLE Nos 36.00 412.00 14832.00

2.10.4 2.05.3 TRIPLE POLE Nos 55.00 610.00 33550.00

2.11 2.06 Supplying and fixing single pole blanking plate in the existing MCBDB complete etc. as required.

Nos 54.00 6.00 324.002.15 2.07 Supplying and fixing following rating, four pole, (three phase and

neutral), 415 volts, residual current circuit breaker (RCCB), havinga sensitivity current upto 300 milliamperes in the existing MCB DBcomplete with connections, testing and commissioning etc. asrequired.

2.15.3 63AMP Nos 37.00 2128.00 78736.00

2.18 2.08 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or inrecess, with chained metal cover for the socket out let and completewith connections, testing and commissioning etc. as required.

Nos 110.00 796.00 87560.00

2.21 2.09 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm,made of mild steel, at least 2 mm thick, and vitreous enameledwhite on both sides, and with inscription in single red colour on frontside as required.

Nos 30.00 133.00 3990.00

3.00 RISING MAINS & BUS TRUNKING

DSR Item No.


3.8 3.01 Supplying, installing on wall, testing and commissioning of followingcapacity Air Insulated Compact Type Rising Mains for use on 3phase 4 wire 415 volts, 50Hz A.C. supply with enclosure made of1.6mm thick steel sheet duly powder coated in convenient sectionscomplete with 4 Nos aluminium bus bars, necessary joints &expansion joints, fire barrier at each floor, provision of tapping atevery metre, continuous earthing with 2 Nos aluminium strip ofsuitable size (one on each side) including, G.I. clamping brackets,angle iron bracket, steel fasteners, connecting to earthing systemetc. as required

3.8.3 3.01.1 400 amps 30KA SC for 1 sec mtrs 30.00 6101.00 183030.00

3.8.5 3.01.2 630 amps 50KA SC for 1 sec mtrs 30.00 8350.00 250500.00

3.11 3.02 Supplying, installing, connecting to existing Air Insulated CompactType bus trunking/ rising mains, testing and commissioning offollowing capacity End Feed Unit for use on 3 phase 4 wire 415volts, 50Hz A.C. supply made with 1.6mm thick steel sheetenclosure duly powder coated with provision of MCCB/ACB (butwithout MCCB/ACB) complete with necessary joints includingclamping brackets, angle iron bracket, steel fasteners, connectingto earthing system etc. as required

3.11.3 3.02.1 400 amps 30KA SC for 1 sec Nos 1.00 5038.00 5038.00

3.11.5 3.02.2 630 amps 50KA SC for 1 sec Nos 1.00 6440.00 6440.00

3.12 3.03 Supplying, installing, connecting to existing Air Insulated CompactType bus trunking/ rising mains, testing and commissioning offollowing capacity Plug In/ Tap Off Box for use on 3 phase 4 wire415 volts, 50Hz A.C. supply with 1.6mm thick steel sheet enclosureduly powder coated with provision of MCCB (but without MCCB)complete etc. as required

3.12.1 125 amps 15KA SC for 1 sec Nos 20.00 4388.00 87760.00

BUS-DUCT ( Sandwiched )

DSR Item No.


3.13 3.04 Supply, installing by suspension on ceiling , testing andcommissioning of following capcity Sandwich Type Bus-trunking for use on 3 phase 4 wire 415 volts supply with matalclad enclosure made of 1.6 mm thick steel sheet duly powdercoated in convenient sections complete with 4 Nos aluminiumbus bars, necessary joints, elbow joints & expansion jointsand bends, fire barrier at each floor, provision of tapping atevery metre,adopter box and copper flexible for joints,continuous earthing with 2 Nos aluminium strip of suitable size(one on each side) including, G.I. clamping brackets,suspenders, angle iron bracket,steel fasteners, connecting toearthing system etc. as required Triple pole and neutral,totally enclosed, dust and vermin proof with IP-67 Ingressprotection, outdoor mounting, 14 SWG sheet steel clad Prefabricated Air insulated bus truncking suitable 415 volts 3phase 4 wire 50 Hz AC supply system with low InductanceAluminium bus bar rated as under to with stand the stressesof a 50kA symmetrical fault level at 415 volts including thecost of bends, fire barriers, expansion joints, copper flexibleend connections at both ends and its terminations at bothends, complete as per specifications as required.

0.00

3.13.7 1600 amp 50 KA SC for 1 sec Per m 10 20790.00 207900.00

4.00 CABLE TRAYS

4.1 4.01 Supplying and installing following size of perforated pre-paintedM.S. cable tray with perforation not more than 17.5% in convenientsections, jointed with connectors, suspended from the ceiling withM.S. suspenders including bolt & nits, painting suspenders etc. asrequired.

4.1.1 4.01.1 MS perforated cable tray size 150mm x 50mm x 1.6mm thickness.

Mtrs 400.00 459.00 183600.00

4.1.2 4.01.2 MS perforated cable tray size 150mm x 50mm x 1.6mmthickness. Metre 300 523.00 156900.00

4.1.4 4.01.3 MS perforated cable tray size 300mm x 50mm x 1.6mm thickness.

Mtrs 200 756.00 151200.00

4.1.11 4.01.4 MS perforated cable tray size 600mm x 62.5 mm x 2 mm thickness.

Mtrs 125.00 1399.00 174875.00

4.2 4.02 Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than17.5%,, joined with connectors, suspended from the ceilingwith M.S. suspenders including bolts & nuts, paintingsuspenders etc as required.

4.2.1 4.02.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 16 760.00 12160.00


4.2.11 4.02.3 MS perforated cable tray size 600mm x 62.5mm x2.0 mmthickness. Each 3 2538.00 7614.00

DSR Item No.


4.3 4.03 Supplying and installing following size of perforated pre-painted M.S. cable trays reducers with perforation not morethan 17.5%, joined with connectors, suspended from theceiling with M.S. suspenders including bolts & nuts, paintingsuspenders etc as required.


4.3.11 4.03.2 MS perforated cable tray size 600mm x 62.5mm x2.0 mmthickness. Each 1 3644.00 3644.00

4.4 4.04 Supplying and installing following size of perforated pre-painted M.S. cable trays Tee's with perforation not more than17.5%, joined with connectors, suspended from the ceilingwith M.S. suspenders including bolts & nuts, paintingsuspenders etc as required.



4.5 4.05 Supplying and installing following size of perforated pre-painted M.S. cable trays cross members with perforation notmore than 17.5%, joined with connectors, suspended from theceiling with M.S. suspenders including bolts & nuts, paintingsuspenders etc as required.



5.00 E A R T H I N G

5.2 5.01 Earthing with G.I. earth pipe 4.5 mtr long, 40mm dia includingaccessories, and providing masonary enclosure with coverplate having locking arrangement and watering pipe etc withcharcoal and salt as required

Each 6 3753.00 22518.00

5.4 5.02 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thickincluding accessories, and providing masonry enclosure with coverplate having locking arrangement and watering pipe of 2.7 metrelong etc. with charcoal/ coke and salt as required.

Nos 26.00 4367.00 113542.00

5.6 5.03 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thickincluding accessories, and providing masonry enclosure with coverplate having locking arrangement and watering pipe of 2.7 metrelong etc. with charcoal/ coke and salt as required.

Nos 22.00 8939.00 196658.00

5.7 5.04 Supply and laying 6 SWG G.I. wire at 0.50 metre belowground level for conductor earth electrode, includingconnections/ termination with G.I. thimble etc as required.

Metre 300 25.00 7500.00

5.10 5.05 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut, bolt,spring, washer excavation and re-filling etc. as required.

Mtrs 196.00 1019.00 199724.00

DSR Item No.


5.11 5.06 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipefrom earth electrode including connection with G.I. nut, bolt, spring,washer excavation and re-filling etc. as required.

Mtrs 228 391.00 89148.00

5.14 5.07 Providing and fixing 25 mm X 5 mm copper strip on surface or inrecess for connections etc. as required. Mtrs 296.00 812.00 240352.00

5.15 5.08 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required. Mtrs 1328 133.00 176624.00

5.16 5.09 Providing and fixing 6 SWG dia G.I. wire on surface or in recess forloop earthing as required. Mtrs 800 34.00 27200.00

6.00 LIGHTNING CONDUCTOR

6.1 6.01 Providing and fixing of lightning conductor finial, made of 25 mm dia300 mm long, copper tube, having single prong at top, with 85 mmdia 3 mm thick copper base plate including holes etc. complete asrequired.

Nos 2 741.00 1482.00

6.4 6.02 Jointing copper / G.I. tape (with another copper/ G I tape, base ofthe finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc as required. Nos 20.00 68.00 1360.00

6.7 6.03 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or

surface of wall for lightning conductor complete as required.(Forhorizontal run) mtrs 500.00 64.00 32000.00

6.12 6.04 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I.

strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts andspring washers etc. complete as required. Nos 12.00 69.00 828.00

6.14 6.05 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode

directly in ground as required. Mtrs 200.00 135.00 27000.00

7.00 MV CABLES LAYING & TERMINATION

7.1 7.01 Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct inground including excavation, sand cushioning, protectivecovering and refilling the trench etc as required.

7.1.1 7.01.1 Upto 35 sq. mm Metre 50 181.00 9050.00

7.1.2 7.01.2 Above 35 sq. mm and upto 95 sq. mm Metre 30 188.00 5640.00



7.3 7.02 Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct inground including excavation and refilling the trench etc asrequired, but excluding sand cushioning and protectivecovering.

7.3.1 Upto 35 sq. mm Metre 750 79.00 59250.00

DSR Item No.


7.5 7.03 Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size in theexisting RCC/ HUME/ METAL pipe as required.

7.5.1 7.03.1 Upto 35 sq. mm Metre 80 15.00 1200.00




7.7 7.04 Laying and fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size on wall surfaceas required.

7.7.1 7.04.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtrs 200.00 22.00 4400.00

7.7.2 7.04.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS

flat clamp) Mtrs 200.00 67.00 13400.00

7.8 7.05 Laying and fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size on cable tray asrequired.

7.8.1 7.05.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtrs 420.00 19.00 7980.00

7.8.2 7.05.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS

flat clamp) Mtrs 410.00 44.00 18040.00

7.8.3 7.05.3 Above 95 sq. mm and upto 185 sq. mm (clamped with25/40x3mm MS flat clamp) Metre 25 54.00 1350.00

7.8.4 7.05.4 Above 185 sq. mm and upto 400 sq. mm (clamped with40x3mm MS flat clamp) Metre 150 84.00 12600.00

7.9 7.06 Supplying and making cable route marker with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size ) of size 60 cm X 60 cm at thebottom and 50 cm X 50 cm at the top with a thickness of 10cmincluding inscription duly engraved as required.

Each 20 283.00 5660.00

7.10 7.07 Supplying and fixing cable route marker with 10 cm X 10 cm X5 mm thick G.I. plate with inscription there on, bolted /weldedto 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required. Each 20 270.00 5400.00

8.00 HT CABLE LAYING

8.1 8.01 Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 11 KV grade of following size direct inground including excavation, sand cushioning, protectivecovering and refilling the trench etc as required.

8.1.1 8.01.1 Upto 120 sq. mm Metre 20 235.00 4700.00


9.00 MV CABLE END TERMINATION

DSR Item No.


9.1 9.01 Supplying and making end termination with brass compressiongland and aluminium lugs for following size of PVC insulated andPVC sheathed / XLPE aluminium conductor cable of 1.1 KV gradeas required.

9.1.20 9.01.1 3½ X 25 sq. mm (28mm) Nos 10.00 210.00 2100.00

9.1.21 9.01.2 3½ X 35 sq. mm (32mm) Nos 14.00 245.00 3430.00

9.1.22 9.01.3 3½ X 50 sq. mm (35mm) Nos 10.00 286.00 2860.00

9.1.23 9.01.4 3½ X 70 sq. mm (38mm) Nos 10.00 324.00 3240.00

9.1.24 9.01.4 3½ X 95 sq. mm (45mm) Nos 12.00 401.00 4812.00

9.1.26 9.01.5 3½ X 150 sq. mm (50mm) Each 6 501.00 3006.00

9.1.29 9.01.6 3½ X 240 sq. mm (62mm) Each 16 824.00 13184.00

9.1.31 9.01.7 3½ X 400 sq. mm (82mm) Each 6 1203.00 7218.00

10.00 HT CABLE END TERMINATION

10.4 10.01 supplying and making indoor cable end termination with heatshrinkable jointing kit complete with all accessories includinglugs suitable for following size of 3 core, XLPE aluminiumconductor cable of 11 KV grade as required :

10.4.2 10.01 120 sq. mm Each 4 6551.00 26204.00

10.4.3 10.02 240 sq. mm Each 4 7007.00 28028.00

11.00 R.C.C. PIPES

14.14 11.01 Providing, laying and fixing following dia RCC pipe NP2 class(light duty) in ground complete with RCC collars, jointing withcement mortar 1:2 (1 cement : 2 fine sand) including trenching(75 cm deep) and refilling etc as required.

14.14.2 11.01 150 mm dia Metre 50 357.00 17850.00

14.14.4 11.02 300 mm dia Metre 50 529.00 26450.00Total Cost of DSR items (Electrical) of Schedule - B 21640226.00

1.00 DUCTING, GRILLS, DIFFUSERS & INSULATION16.12.1 1.01 Supply, installation, balancing and commisnioning of factory

fabricated GSS sheet metal ducts rectangular / round ductingcomplete with neoprene rubber Gaskets, elbows, splitter,dampers, vanes, hangers, supports etc as per approveddrawings & specification of following sheet thicknesscomplete as required.

16.12.1.1 1.01.1 Thickness 0.63 mm sheet Sqm 450 637.00 286650.0016.12.1.2 1.01.2 Thickness 0.80 mm sheet Sqm 300 750.00 225000.0016.12.1.3 1.01.3 Thickness 1.00 mm sheet Sqm 200 933.00 186600.0016.12.1.4 1.01.4 Thickness 1.25 mm sheet Sqm 100 1069.00 106900.00

DSR SCHEDULE ITEMS (HVAC) SCHEDULE -C

DSR Item No.


16.12.2 1.02 Supply, installation, balancing and commisnioning of sitefabricated GSS sheet metal ducts rectangular/round ductingcomplete with neoprene rubber gaskets, elbows, splitter,dampers, vanes, hangers, supports etc as per approvedrawings and specifications of following sheet thicknesscomplete as required.

16.12.2.1 1.02.1 Thickness 0.63 mm sheet Sqm 50 584.00 29200.0016.12.2.2 1.02.2 Thickness 0.80 mm sheet Sqm 50 662.00 33100.0016.12.2.3 1.02.3 Thickness 1.00 mm sheet Sqm 50 883.00 44150.0016.12.2.4 1.02.4 Thickness 1.25 mm sheet Sqm 50 1024.00 51200.00

16.13 1.03 Supply, Installation, Testing and Commissioning of GI VolumeControl Dampers complete with neoprene rubber gaskets,nuts, bolts, screw linkages, flanges etc. as per specifications.

Sqm 10 4673.00 46730.00

16.15 1.04 Supply & fixing of powder coated extruded aluminium Supply Air grills with aluminium volume control dampers as perspecification. Sqm 40 6326.00 253040.00

16.16 1.05 Supply & fixing of powder coated extruded aluminium ReturnAir grills with louvers but without volume control dampers asper specification. Sqm 40 3742.00 149680.00

16.17 1.06 Supply,fixing, testing & commissioning supply air diffusers of poweder coated aluminium with volume control dampers withanti smudge ring & removal core.

Sqm 10 8440.00 84400.00

16.18 1.07 Supply,fixing, testing & commissioning Return air diffusers of poweder coated aluminium with volume control dampers withanti smudge ring & removal core.

Sqm 10 5621.00 56210.00

16.21 1.08 Supply & fixing of acoustinc lining of supply air duct & plenumwith 25mm thick resin bonded glass wool having density of32Kg/m3, with 25mm x 25mm GI section of 1.25mm thick, at600 mm center to center covered with reinforced plastic tissuepaper & 0.5 mm thick perforated aluminum sheet fixed toinside surface of ducts with cadmium plated nuts, bolts, stickpins, CPRX compound etc. complete as required and as perspecifications.

Sqm 100 503.00 50300.00Total Cost of DSR items (HVAC) of Schedule - C 1603160.00

S. No Description of ItemUnit Quantity Rate in Fig. (Rs.)

Rate in Words (Rs.) Amount (Rs.)

1.00 Providing and fixing chicken wire mesh with nails complete in allrespects on joints of RCC and brickwork before plaster at all levelsand height. SQM 2391.60

2.00 Providing and laying 12.30 mm thick AC-5 laminate woodenflooring in Seminar Room with double locking system on 3mm thickfoam for noise reduction. Wooden planks having mehlamineimpregnated decorative film of HDF density (water resistant) withwax coating for water proofing to be laid complete in all respects asper manufacturer's specifications.

SQM 151.57

3.00 Providing and fixing looking mirror of approved make in Gym on allsides of walls complete as shown in the drawing or direction of theArchitect at all heights and locations complete in all respects.

SQM 138.11

4.00 Providing and Fixing ‘APHONY CORTEX’ Tiles on walls made ofWood Fibre cement composites 25 mm thick and covered withAcoustically Transparent Fabric on the front side, with an option ofcolours as per the choice of the Architect/ person in charge of size

Name of Work: Construction of Multi Storied Academic Tower in Zakir Husain Delhi College, New Delhi.Tender No. RITES/CP/TC/ZHDC/Multistoried Academic Tower/2014

NON-SCHEDULE ITEMS (CIVIL) SCHEDULE -D

colours as per the choice of the Architect/ person in charge of size1200X600/ 600X600 mm. Providing sound absorption of 0.90 NRC as per ISO:354-1985 and ASTM 423-90 a, STC of 49 as per ASTME90/413 meets the stringent fire ratings ASTMD- 876, weatherresistant as per IS 3308 ,Thermal Insulation as per IS:3346-1980.Conforms to EN 131682001.To be installed with H profile fixed onG.I studs 2400mm X 50mm web, flanges 15 & 50mm fully knurledgiving it high strength, hot dipped galvanized steel with 120GSMzinc coating specially designed for Acoustic vibration managementand long life with a backing of approved make 50mm thick absorbwool / Insulation for excellent results

SQM 123.33

5.00 Providing and Fixing of ‘APHONY GLOSS’ 15 mm ceiling tilesmade of Wood Fibre cement composites covered with AcousticallyTransparent Absorptive microfibres on the front side with an optionof colours as per the choice of the Architect/ person in charge ofsize 595 X 595mm Highly recommend for ceilings, has excellentnoise absorption of 0.8 NRC, as per ISO 354/ASTM 423C, meetsstringent Fire Ratings ASTM D- 876, weather resistance as per IS3308, Thermal Insulation as per IS:3346-1980 with relativehumidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days=No deterioration. Can be installed on T24/ grid system as per thechoice of the architect/engineer specially designed for Acousticvibration management and long life.

SQM 128.15

6.00 Providing, fixing and embedding sand cast iron rain water pipes inthe masonry surrounded with 12mm thick cement mortar of thesame mix as that of masonary. Lead caulking will be paidseparately.



150 mm dia pipe MTR 263.40

7.00 Waterproofing of Raft:

Supplying and installing positive side waterproofing treatment for“Raft Slab’’ by using a pre – applied, flexible 1.2mm thick fullybonded HDPE sheet membrane.The fully bonded HDPE sheetmembrane shall consist of a thick white HDPE film, a highly aggressive pressure sensitive adhesive and weather resistingcoating which bonds integrally to poured concrete of baseslab. An intimate bond is formed to the poured in-situ structuralconcrete by means of a pressure sensitive adhesive preventinglateral water and moisture migration between the membrane andstructure.

The membrane shall be chemically resistant in all types of soil orwater, has a zero permeance to moisture, is solar reflective toreduce heat gain while exposed, does not activate prematurely dueto wet conditions and is unaffected by ground settlement beneathslabs.

The membrane shall conform to basement waterproofingprotection to grades 2, 3 as defined in BS 8102:2009.

The fully bonded HDPE Sheet waterproofing membrane shall havefollowing minimum properties:

(i) Resist hydrostatic pressure of upto 70m head of water (as perASTM D5385)

(ii) Puncture resistance of 990N (as per ASTM E154)( ) ( p )(iii) Elongation of 300% (as per ASTM D412)(iv) Tensile strength of 27.6Mpa (as per ASTM D412)

The fully bonded HDPE Sheet waterproofing membrane shall beinstalled with standard 75mm selvedge laps and 75mm end lapstaped with a double sided coated adhesive tape over the entirearea and turned up on to a vertical timber.The membrane shall belaid over the concrete blinding (PCC) having smooth dried surfaceincluding necessary removal of release liner of membrane whileapplying, necessary overlaps between the membranes and fixingoverlaps by a double sided coated adhesive tape, firm rolling ontothe surface to get a tight seal,etc.

All materials to be used of approved make and applied as permanufacturer's recommendations, etc.complete with all lead and liftfor all materials and labour and as directed by Engineer in-charge.

SQM 4214.80

8.00 Watreproofing of Unconfined Retaining walls:

Supplying and Installing a post applied, self adhesive, coldapplied , flexible 1.5mm thick waterproofing membrane comprising of a self adhesive rubberized asphalt with crosslaminated HDPE film with a unique non-metallised grey coloursolar reflective composite carrier film to reduce heat gain whilethe membrane is exposed and to easily spot damage prior toplacement of overlying construction.The membrane shall have pre-marked overlaps of 50mm and shall be applied on the uniformconcrete surface.



The membrane shall conform to basement waterproofingprotection to grades 2, 3 as defined in BS 8102:2009 and shallhave following minimum properties:

(i) Puncture resistance of 290N(ii) Resistance to Hydrostatic head of 70m (ASTM D 5385)(iii) Should be resistant to Sulphates, Nitrates and Salt in soil.

For Membrane Protection:Supply and Applying an externally placed, high flow, rot proof,prefabricated geocomposites drainage sheet/board for reducinghydrostatic pressure against basement walls protected with abovewaterproofing membrane. The drainage sheet/board shouldcomprise of an 11mm studded polystyrene drainage core coveredwith polypropylene spunbonded filter fabric on one face and havingcompressive strength of 712kg/sq.cm.The backfilling shall be donewithin 2-3 days of fixing drainage sheet/board.

All materials to be used of approved make and applied as permanufacturer's recommendations, etc.complete with all lead and liftfor all materials and labour and as directed by Engineer in-charge.

SQM 4094.98

8A Waterproofing treatment to Construction joints

Supply and installing an internally placed conformable, swellablepolymer/butyl rubber waterstop strip (25mm x 20mm fixed withmanufacturer's approved adhesive or mastic) designed for theprotection of construction joints in raft and retaining wall, castingnew to existing concrete, floor slabs against diaphragm retainingwalls steel sheet piles and secant piled walls and all otherwalls, steel sheet piles and secant piled walls and all otherlocations as mentioned in drawings. The waterstop shall swellswhen in contact with water and when fully encapsulated by pouredconcrete, the expansive forces form a seal against concretefaces.This seal resists hydrostatic pressure, stopping water fromentering the structure.

All systems to be installed as per manufacturer'srecommendations, etc . complete with all lead and lift for allmaterials and labour and as directed by Engineer in-charge.

MTR 3356.07

9.00 Applying Anti Termite Treatment using pre constructional chemicaltreatment measures as per IS - 6313 - 2001 ( Part 2 ) & usingChemical containing chloropyrifos systemic insecticide diluted tomanufacturer's specifications (i) In foundation pits, by treating thebottom & sides up to height of 300mm by uniformly sprayingsolution @ 5 Litre / sqm (ii) In the refill earth on both sides of allbuilt up walls @ 7.5 Litre / Running meter (width - 300 mm, depth -450 mm) (iii) Before laying the floor, by uniformly sprinkling the topsurface of the consolidated earth within the outer perimeter @ 5Litre solution per sqm (except concentated chemical). Themeasurement for all the operations described above shal be theplinth area of the building in Sqm at Ground Floor.

SQM 169.66



10.00 Providing and fixing Stainless steel gate 6 mtr x 2 mtr at entry / exitpoints in boundary wall fabricated from 1.5" x 3" x 1.5 mm boxframe and horizontal members etc. with panelling of 6" wide ACP4mm thick on both sides as per drawing including locking and fixingarrangements, ball bearing and roller if required complete in allrespects.

EACH 2.00

11.00 Providing and laying Synthetic sports surface for IndoorMultipurpose Hall Synthetic Sports flooring (Gym) with totalthickness of 12 mm thick, combining two layer installation with5mm Polyoléfine foam and 7 mm thick World Badminton,basketball volleyball & handball Federation approved syntheticfloor which consist of 100% pure vinyl wear layer not less than 2mm thick, protecsol and sanosol treated to reduce Skin burn withdouble fiber glass grid for sound stability on floor and 5 mmCXPTM HD double density foam backing with D-MAXTM+ensuring highest possible resistance to indentation, durability andenergy return, width of sheet not less than 1.5 M joined withseamless Hot welding. Laid with adhesive as per manufacturer’sinstruction over existing leveled surface including game linesmarking with manufacturer's specifications complete in all respects.

SQM 146.54

12.00 Providing and laying heavy duty sports flooring 63 mm thick forsquash room consisting of 20 x 57 mm MFMA certified second andbetter grade hard maple strip as per specification on sub-floor to betwo layers of 12 mm plywood sheathing of exposure 1 categoryincluding 19mm hamisphericle two stage polyrethane 70 Ddurometer Neo shock pads over 0 2 mm thick polythylene vapordurometer, Neo shock pads over 0.2 mm thick polythylene vaporbarrier with heavy duty sports flooring sealent. All materials to beused of approved manufacturer and as per approved specificationfor such type of flooring. Flooring is to be as per standards /specifications approved from squash federation complete in allrespects as per drawing including game line marking as required.

SQM 147.79

13.00 Extra for providing and mixing non-shrink admixture i.e. superplasticizer (retarder / escalator) of approved manufacture in RCCfor shrinkage strip as per manufacturer's specification complete inall respects at all levels and height.

KG 1327.13

14.00 Providing and fixing sink mixer wall mounted compelte with fittingsbrackets and cutting and making good the walls wherever required.

EACH 2.00

15.00 Providing and fixing table top type wash hand basin of size 160 x485 x 365 mm with 32 mm CP brass waste of standardspecifications including brackets required complete with fittingscutting of walls and floors and making good the same to its originalconditions complete as required by the engineer-in-charge.

EACH 118.00

16.00 Providing and fixing Sensor faucet for wash hand basin with baseflange of complete with fittings cutting and making good the wallswherever required. EACH 118.00



17.00 Providing and fixing hand shower (Health Faucet) of with 80mmdia, 1 metre long and flexible pie and wall fixed holder of completewith all fittings including cutting and making good the walls andfloors wherever required. EACH 126.00

18.00 Providing and fixing chromium plated Rob-Hookes complete will allfittings including cutting and making good the walls.

EACH 158.00

19.00 Constructing surface drains in cement concrete with cementplastering 12mm thick in 1:2 cement sand mortar inside the drainwith CI grating and frame at the top.

19.01 225 mmx 100 mm size METRE 85.0019.02 225 mm x 150 mm size METRE 39.0019.03 225 mmx 225 mm size METRE 14.0019.04 300 mmx 150 mm size METRE 34.0019.05 300 mmx 225 mm size METRE 30.0019.06 300 mmx 300 mm size METRE 24.00

20.00 Supplying, assembling, lowering and fixing unplasticized rigid PVC(Class III) 6 Kgcm pressure as per IS - 4985/ 2000 including cost offittings and accessories complete as directed by Engineer-in-charge.

20.01 150 mm nominal size dia METRE 45.0020.02 200 mm nominal size dia METRE 180.00

21.00 Providing, installation, testing and commissioning and electricdriven monoblock pumping set for boosting clear water fromunderground storage reservoir to OHT with a pumping capacity of500 - 515 LPM to a head of 45 Mtrs, comprising of cast iron casing/ impeller and stanless steel shaft with 2900 RPM make CromptonGreaves model no. MINHI0-2B or equivalent make equipped withelectric connection, CI specials, foundations etc. complete in allrespects. BHP - 10

Sets 2.00

22.00 Providing, installation, testing and commissioning of Electric drivensubmersible pumping set for pumping out Tertiary Treated waterfrom STP to OHT at roof top with a pumping capacity of 150 LPMand pumping head of 45 Mtr comprising of casing / impeller of castiron adn stainless steel shaft with 2900 RPM make CromptonGreaves Model OWNH7.52 or equivalent make equipped withelectric cable connection, CI specials, inlet connections pipe,complete in all respects as required by the engineer-in-charge.BHP-7.50

Sets 2.00

23.00 Providing, installation, testing and commissioning of Electric drivensubmersible pumping set for pumping out rain water frombasements to ground floor with a pumping capacity of 720 LPMand pumping head of 15 Mtr comprising of casting / impeller of castiron and shaft of stainless steel, RPM 2900 make CromptonGreaves, Model OWO 3.2 or equivalent make, equipped withelectric cable connection, CI specials complete in all respects asrequired by the Engineer-in-charge.

Sets 4.00

24.00 Supply and stacking of Selection Grass carpet complete at site

Sqm 1533.85



25.00 Supply, stacking and plantation of following trees complete at site: -

25.01 Alistonia Scholaris 3 Mtr Height Each 25.0025.02 Jacranda purple 3 Mtr height Each 25.0025.03 Melia indica (Neem) 02 Mtr Height Each 25.0025.04 Cassia Samia 2 Mtr Height Each 25.0025.05 Cycus Palm 1 Mtr Height Each 20.0025.06 Royal Palm 2 Mtr Height Each 25.0025.07 Ficus Repens 0.30 Mtr Height Each 580.0025.08 Adenoclyma 0.60 Mtr Each 105.0025.09 Fish Tail Palm 3 Mtr Height Each 3.0025.10 Fox Tail Palm 3 Mtr Height Each 9.0025.11 Ficus Panda 0.60 Mtr Height Each 175.0025.12 Ficus Long Island 0.60 Mtr Height Each 175.0025.13 Areca Palm 2 Mtr height Each 4.0025.14 Plumaria Alba 2 Mtr height Each 4.0025.15 Supply, stacking, installation and preparion of bed etc. complete at

site for following ground plants: -

25.16 Verbeena Prenial 0.30 Mtr Height Each 1000.0025.17 Golden Duranta 0.60 Mtr Height Each 115.0025.18 Iresene Herbestii 0.30 Mtr complete at site. Each 120.0025.19 Asparagus sprengerii complete at site. Each 60.0025.20 Ribbon Grass 0.015 Mtr Height complete at site. Each 5270.0025.21 Black Grass 0.015 Mtr Height complete at site. Each 5270.00

26.00 Supplying, Testing, Installation and Commissioning of Fountainwith cascading consisting of a 2 sets of arc of joy fountain eachcontaining 2 jets. Fountain consist of 16 mm brass nozzles. Eachnozzles is fully adjustable for a precision effect with manifold

ti k t t & b lt f d ti b lt l ithmounting gaskets nuts & bolts, foundation bolts along withvalves to adjust flow/pressure & necessary pipe work. Nozzlesare precision machined made of brass, gunmetal, stainlesssteel or aluminum. Cascading along wall 4.6 mtr wide and 6.7 mtrhigh. Make NPT / Premier / Pem fountain / WaterworksInternational/ Lite Metal only.

Pump2x1.5 hp mono submersible pump sets for fountain and 1 x 3hppump for cascading , with steel mounting frame, grouting bolts,stainless steel screen on pump suction,3core flat copper conductorflexible cable of size not less than 1.5sqmm. Make Kirloskar /KSB.

Control PanelIn sheet steel paint finish enclosure front hinged door provision forincoming and outgoing cable entry. Panel comprises of 3polecircuit breaker, voltmeter with selector switch, ammeter, motorprotection circuit breaker, frequency inverter, HRC fuse base andcarrier, cam operated two way centre off rotary switch, plug in typerelays with LED indicator, auxiliary contactor, terminal connecter,potentiometer, indicating lamp, motion controller for jets, etccomplete with internal wiring. Make NPT / Premier / Pem fountain /Waterworks International/ Lite Metal only.



Light - 4 no lights for fountain and 4n0 (white light ) for cascading21 watt * 12 watt Waterproof luminaries with array of high output ofLEDs housed in compact enclosure of die cast aluminum alloy withheat fused epoxy / polyester all over coating. Overall length oflight body shall be 138 mm and dia of cover ring 156 mm.Toughened glass with elastomer seal. Special plastic cable gland.Compact socket head fasteners and mounting bracket are all ofstainless steel. The light has LEDs giving red, green, deep blue,yellow, magenta (purplish pink), cyan (aqua or blue /green) pluswhite. The LED light is operate on 220-230V having latesttechnology & because of this transformer not required hence lifeincreased because of unacceptable voltage drop by use of 24 DCsupply. Make NPT / Premier / Pem fountain / WaterworksInternational/ Lite Metal only.

Each 1.00SEWERAGE TREATMENT PLANT

27.00 Design, supply, engineering, construction, fabrication and supply ofone unit of 250 Cum per day Sewrage Treatment Plant based onSBR technology which includes following equipments etc.

1. Bar screens 2 no.(2w)

2.Raw Sewage Feed pumps,centrifugal,submersible 2 nos ( 1w +1 s)3. Blowers. 2 nos ( 1w + 1s)4. Decanter 1 No.5. Control panel with PLC 1 No6. Oxidant Dosing pump 2 nos (1 w +1 S)7. Secondary feed pump 2 nos (1w +1 S).8. Multi grdae filter 1 no9. Activated Carbon Filter 1 no.10.Sludge circulation pumps 2 nos (1w+1 s)11. Fillter press feed pump 2nos (1w + 1s)12. Hydraulic flitter press 1 no13. UV system 1no14. Activated valves 1 lot15. Level sensors 1 lot16. Set of Instruments 1 lot17. Interconnecting pipe work 1 lotRates includes erection and commissioning etc. complete. JOB 1.00Note: Civil works included in the main civil works estimate.

FIRE FIGHTING WORKSSUBHEAD - I - PUMPING MACHINERY

28.00 Supplying, installation, testing and commissioning of Electric drivenhorizontal centrifugal fire duty terrace pumps, (with mechanicalseal, bronze impeller and carbon steel EN-8 shaft) capable to carrydischarge 900 LPM at a head of 35 Meters, coupled with flexiblecoupling and totally enclosed fan cooled squarrel cage , 4 poleinduction motor 15 BHP with cover suitable for operative on threephase AC supply of ±415 + 10% Volts 50 Hz, making suitableconnection, concrete foundation, using suitable anti-vibrationmountings as per detailed specifications as required by theEngineer-in-charge.

EACH SET 2.00

SUBHEAD - II - PIPING AND ACCESSORIES



29.00 Supplying, laying, fixing, testing and commissioning of followingsizes (NB) of ISI marked heavy M.S. C class pipes includingcutting, threading, welding etc. and providing all fittings e.g. elbows,reducers, clamps, hanges, flanges, gaskets, nuts, bolts andwashers etc. including painting of pipes and fittings with red paintover a coat of ready mixed primer, both of approved quality andshade includign cutting holes and chases in brick or RCC walls /slabs and making good the same etc. complete in all respects asrequired.

29.01 100 mm dia METRE 415.0029.02 80 mm dia METRE 21.0029.03 50 mm dia METRE 63.0029.04 40 mm dia METRE 110.0029.05 32 mm dia METRE 615.0029.06 25 mm dia METRE 405.00

30.00 Supplying, laying, testing and commissioning of following sizes(NB) ISI marked heavy MS C Class pipes including cutting,screwing, welding etc. and providing all fittings such as elbows,reducers, flanges, gaskets, nuts, bolts, and washers etc. includingapplying with one coat of readymix primer, wraping the pipe with4mm thick wraping tape of IWL / Kotak makes, laying the pipe sothat the top fo the pipe is at a depth of one meter below groundlevel including excavating trenches and then refilling the soil inlayers not exceeding 20 cms in depth consolidating each depositedlayer by ramming, watering etc. complete as required.

100 mm dia METRE 426.00

31.00 Supplying, installation, testing and commissioning of cast ironsluice valve of PN 1.6 rating flanged at both ends of following sizescomplete with rubber insertion, nuts, bolts and washers etc. asrequired.

100 mm dia METRE 2.00

5.00 Supplying, installation, testing and commissioning of cast iron Nonreturn valve of PN 1.6 rating of following sizes conforming torelevant IS specifications and providing and fixing nuts, bolts,washers, gaskets etc. complete as required.

100 mm dia EACH 2.00

32.00 Supplying, installation, testing and commissioning of Butterflyvalves of PN 1.6 rating of following sizes with nitrile seat andstainless steel stem with lever / gear operation and cast iron bodyin powder coating finish for fighting application complete in allrespects as required.

32.01 100 mm dia EACH 8.0032.02 80 mm dia EACH 2.0032.03 50 mm dia EACH 2.00

33.00 Supplying, installation, testing and commissioning of forged brassball valves with brass body nickel coated, brass ball, hard chromeplated, suitable for fire fighting complete in all respects.

50 mm dia EACH 2.00

34.00 Supplying, installation, testing and commissioning of 100mm diaBourden type stainless steel dial type pressure gauge includingbrass isolation valve and pipe having caliberation of 0-16 Kg / cm2.

EACH 4.00



SUBHEAD - III - HYDRANT AND HOSES

35.00 Supplying, installation, testing and commissioning of RRL FireHOSE, ISI marked 63mm dia x 15m long with gun metal male andfemale couplings (ISI marked) bound and rivetted to hose pipeswith copper rivets and copper wire as required.

EACH 36.00

36.00 Supplying, installation, testing and commissioning of single headedgun metal ISI marked oblique pattern landing valve type A with80mm dia, flanged inlet and 63mm dia instanteous type femaleoutlet complete with A.B.S. plastic cap and chain, twist release typelug and all accessories complete as required.

EACH 18.00

37.00 Supplying, installation, testing and commissioning of single headedgun metal ISI marked oblique pattern landing valve Type A with80mm dia flanged inlet and 63 mm dia instanteous type male outletcomplete with A.B.S. plastic cap and chain, twist release type lugand all accessories complete as required.

EACH 18.00

38.00 Supplying, installation, testing and commissioning of First Aid FireHose reel wall mounting swinging type complete with drum,bracket, 20mm dia, 30 M long high pressure hose reel tubing withgunmetal shutoff nozzle conforming to IS: 8090-1976. The hosereel shall be as per IS: 884-1985.

EACH 27.00

39.00 Supplying, installation, testing and commissioning of standard FireMan's axe with heavy insulated rubber conforming to IS: 926.

EACH 18.00

40.00 Supplying, installation, testing and commissioning of 15mm diaQuartzoid bulb type sprinkler with temperature rating at 68 degree /79 degree Celcius made out of forged brass and in powder coatedfinish.

40.01 Pendent / upright type EACH 235.0040.02 Side wall type EACH 15.00

41.00 Providing and fixing M.S. Hose cabinet of size 900 x 600 x 500 mmfabricated out of 16 CGW M.S. Sheet and M.S. angle of 40mm x 40mm x 6 mm (nominal size) complete with glass of 5mm thickness(nominal) in front having locking arrangement including painting themetal portion with one coat of ready mixed primer paint and twocoats of synthetic enamel paint of approved shade and quality,sign writing etc. complete as required.

EACH 18.00

42.00 Supplying and fixing vane type water flow switch suitable forinstallation on 50 mm to 150 mm dia line for a service pressureupto 20 Kg / Sqcm of Potter / System sensor / Angus.

EACH 2.00



43.00 Construction of masonary chamber 90 x 90 x 100 cm, inside with75 class designation brick work in cement mortar 1:5 (1cement : 5fine sand) for sluice valve, with CI surface valve with CI surface box100 mm, top diameter, 160mm bottom diameter and 180mm deep(inside) with chained lid and RCC top slab 1:2: mix (1cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size)necessary excavation foundation concrete 1:5:10 (1 cement : 5 finesand: 10 graded stone aggregate 40 mm nominal size) and insideplastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mmthick finished with a floating coat of neat cement complete as perstandard design - with FPS bricks.

EACH 4.00

SUBHEAD - IV - MISCELLANEOUS WORKS

44.00 Supply, laying, fixing, testing and commissioning of electric panelincluding insultated PVC sheathed armoured aluminium conductorcable of 1.1 KG grade on cable tray / surface or undergroundincluding digging and refilling with sand and brick cushioning asrequired.

ONE PANEL 1.00

45.00 Providing and fixing with bracket / supports etc. wall mounted fireextinguishers as per detail below: -

ISI marked 6 Kg capacity dry powder fire extinguishers with highpressure discharge hose, squeeze grip nozzle, 120 grams carbondioxide cartridge, gunmetal cap with initial charge of dry powder.Both extinguishers and dry powder to be ISI marked (Class ABC,IS 15683 - 2006) GETECH.

EACH 60.00

TOTAL OF NON -SCHEDULE ITEM (D)

1.00 Supply of XLPE insulated PVC sheathed ( Heavy duty ) armouredelectric cable with aluminium conductor for working voltage of1100 volts confirming to IS : 7098 ( Part- I ).

1.01 3½ X 25 sq. mm mtrs 200.00

1.02 3½ X 35 sq. mm mtrs 400.00

1.03 3½ X 50 sq. mm mtrs 200.00

1.04 3½ X 70 sq. mm mtrs 200.00

1.05 3½ X 95 sq. mm mtrs 200.00

2.00 Supply of surface mounted 1'X4' LED panel luminaries 38W - 42W with lumen output not less than 3200 lumens,Constant current &constant voltage LED driver with THD <18% & power factor of min0.9, working voltage range should from 90-260V AC. Comlete in allrespect. For Offices. (Make : Wipro CRCO13S38HP57 or approvedequivalent)

No 52.00

NON-SCHEDULE ITEMS (ELECTRICAL) SCHEDULE -E



3.00 Supply of surface mounted LED Downlighter 13W - 15 W withlumen output not less than 1000 lumens, Constant current &constant voltage LED driver with THD <18% & power factor of min0.9.working voltage range should from 90-260V AC. Comlete in allrespect.For Front Entry & Other Decoration purpose. (Make: WiproCRDL11S013HP57 or approved equivalent)

No 28.00

4.00 Supply of Recessed mounted LED Downlighter 13W - 15 W withlumen output not less than 1000 lumens,Constant current &constant voltage LED driver with THD <18% & power factor of min0.9.working voltage range should from 90-260V AC. Comlete in allrespect. For Main Loby & Seminar Room. (Make: WiproCRDL11R013HP57 or approved equivalent)

No 51.00

5.00 Supply of inground mounted LED uplighter 3W, with lumen outputnot less than 130 lumens, IP 67. Comlete in all respect.Forbasement Ramps. ( Make : Wipro LI10-003-045-AM-XX orapproved equivalent) No 30.00

6.00 Supply of surface mounting CRCA box type luminaries withelectronic ballast having THD less than 10%,P.F.not less than 0.97suitable for 1X28watt T5 lamps complete with all accessories and 1no. 28 watt T5 lamp all necessary connection etc as required atsite. (Make: Wipro WIF90128SG or approved equivalent ) ForBasement & Toilets

Nos 157.00

7.00 Supply of recessed mounted 2'X2' LED panel luminaries 33W withlumen output not less than 2000 lumens, Constant current &constant voltage LED driver with THD <18% & power factor of min0.9, working voltage range should from 150-270V AC. Comlete inall respect. For Seminar Room. ( Make: Wipro LM-17-291-XXX-57-XX or approved equivalent )

Nos 56.00

8.00 Supply of recessed mounted STEP LIGHT LED 2.2W, IP 65.integral Comlete in all respect.For Stair case. (Make : Wipro LT54-002-XXX-WH-XX or approved equivalent) Nos 32.00

9.00 Supply of Flood Light luminaire 70W MHL with Lamp Comlete inall respect. For Fizard Lighting. (Make: Wipro WFZ 53070 orapproved equivalent) Nos 16.00

10.00 Supply of Bulkhead Luminaire 9W CFL with Lamp Comlete in allrespect. (Make: Wipro WKP 14109 or approved equivalent)

Nos 85.00

11.00 Supply of Surface Mounted Mirror Optice Fitting 1 x28 W with T5lamps complete in all respect. (Make: Wipro WVF58128 SGCREST or approved equivalent) Nos 319.00

12.00 Supply of Surface Mounted Mirror Optice Fitting 2 x28 W with T5lamps complete in all respect. (Make : Wipro WVF58228 SGCREST or approved equivalent ) Nos 52.00

13.00 Supply of surface mounted Compact fluorescent light fixture 2 x11 watt including CFL lamp. (Make: WIPRO cat. No. WIP 41211 orapproved equivalent. ) Nos 44.00



14.00 Supply of A.C. CEILING FAN 48" (1200MM) SWEEP, ( Make :HAVELLS ES - 5* or approved equivalent ). Nos 626.00

15.00 Supply of A.C. CEILING FAN 56" (1400MM) SWEEP, ( Make :HAVELLS ES - 50 or approved equivalent ). Nos 10.00

16.00 Supply of A.C. WALL FAN single phase, 1400 RPM, 450 MMSWEEP (Make : HAVELLS TURBO FORCE or approvedequivalent ). Nos 13.00

17.00 Supply of Exhaust FAN , Single phase, 1400 RPM (380MM)SWEEP ( MAKE :HAVELLS TURBO FORCE or approvedequivalent ) Nos 46.00

18.00 Supply of Exhaust FAN , Single phase, 1400 RPM (450MM)SWEEP ( MAKE :HAVELLS TURBO FORCE or approvedequivalent ) Nos 10.00

LIFTS

Supply installation testing and commissioning of 13 passenger(884 KG ) lift having contract speed of 1.00MPS serving differentfloors in the lifts shaft and barrier free requirements as perappendix-VII of CPWD General specifications for electrical works(part-III-lifts & Escalators), 2003 and as per detailed specificationenclosed as under :-

No 4.00Speed - 1.00 MPSFloors-Basement1&2+ground+9Travel - 33 Meters (appx)Stops & Opening - 13 (all on one side)

19.00

p p g ( )Controller -AC variable voltage & variable frequency(V3F) Operation -simplex full collective with and without attendant gearless drive & machine room less

Power - 415 ± 15% V , 3Phase, 50Hz ACType of doors Car Entrance - Protected by two speed sliding Stainless steel doors in Hairline Finish

Landing Doors - Protected by Two speed Sliding stainless steeldoors in Hairline Finish

Door Operation - Automatic and Multi Ray Electronic Door DetectorSystem

Signals Combined Luminous hall button with seven segment digital hallposition indicators at all floors

Car operation panel with luminous floor button in carSeven segment digital car position indicator in carBattery operator alarm bell and emergency lightFireman's Switch Overload warning deviceAutomatic rescue deviseVoice SynthesizerComplete with in all respect with providing and fixing guide rails,minor building works, scaffolding, putting into operation and finaltesting etc as required

Supply, installation testing and commissioning of Service Elevator(1000 KG ) lift having contract speed of 1.00MPS serving differentfloors in the lifts shaft and barrier free requirements as perappendix-VII of CPWD General specifications for electrical works(part-III-lifts & Escalators), 2003 and as per detailed specificationenclosed as under :-

No 1.00Speed - 1.00 MPSFloors-Basement1&2+ground+9

20.00



Travel - 33 Meters (appx)Stops & Opening - 13 (all on one side)Controller -AC variable voltage & variable frequency(V3F) Operation -simplex full collective with and without attendant gearless drive with machine room

Power - 415 ± 15% V , 3Phase, 50Hz ACType of doors Car Entrance - Protected by two speed sliding Stainless steel doors in Hairline Finish

Landing Doors - Protected by Two speed Sliding stainless steeldoors in Hairline Finish

Door Operation - Automatic and Multi Ray Electronic Door DetectorSystem

Signals Combined Luminous hall button with seven segment digital hallposition indicators at all floors

Car operation panel with luminous floor button in carSeven segment digital car position indicator in carBattery operator alarm bell and emergency lightFireman's Switch Overload warning deviceAutomatic rescue deviseVoice SynthesizerComplete with in all respect with providing and fixing guide rails,minor building works, scaffolding, putting into operation and finaltesting etc as required

Electrical Panel

21.00 Supply, installation, testing and commissioning of front operated,No back access, cubicle type, indoor duty, floor/wall mounted ,totally enclosed dust and vermin proof panels with minimumIngress protection classification of IP 54, fabricated from 2 mmthick CRCA sheets frame work & cover with dip coat priming andepoxy powder coated finish. The panels must be suitable for 415volts 3 phase, 4 wire, 50 Hz, system , must be able to withstandsymmetrical fault level of 50 KA for 1 sec at 415 V and mustinclude all soild interconnections, earthing and bondingrequirements etc. The panels must conform to drawings ,standards specified in relevant specifications & CPWDspecifications.

The panels shall be provided with detachable gland plates 3 mmthick in two half for entry of cables from the top / bottom asrequired through cable alley.

All live accessible parts shall be shrouded and all equipment shallbe finger touch proof. The busbars shall be insulated with heatshrinkable sleeves and SMC busbar supports suitably spaced .Hinged doors shall be provided on all outgoing feeders with switchhandles lockable in OFF position.

Earthing all components, frame etc. to a common internal earthbar of suitable size Aluminium , as required by the fault withstandlevel specified for the panel at the rear with 2 nos earth stud .

All accessories & supporting structures such as channels, ISMC-75base frame, mounting brackets, lifting lugs, panel heaters,ventilation arrangement etc shall be provided

Each incomer and outgoing feeder shall be provided with LED typestatus indication lamps suitable for 240 V, AC.

All interconnections, labeling, earthing, associated foundation /masonary work & erection etc. complete shall be executed asrequired.



ALL MCCBs for outgoing shall be Icu= Ics, should have suitablespreader links & panel mounted extended rotary handlemechnism as per requirment.

All control wiring should be FRLS 2.5 mm sq copper wire.PANEL-I Lift Panel at Top of DG riser with solid interconnections.

INCOMER

One numbers 160 Amp ,36KA, 3 - pole , MCCB each havinghaving TMD rel + ROH & one number 160 A, 3 P Power Contactorwith 2 NO+2 NC Aux Contract

Phase indication R-Y-B. with MCB 2 ampMetering1 No Flush Digital Voltmeter with In built Selector Switch1 No Flush Digital Ammeter with Inbuilt Selector Switch3 Nos. CTs 160/5A, 15VA, CL-1 for metering.BUS-BARS

One Number of Electrolytic high conductivity T P & N Aluminumconductor bus-bars rated 200 Amps

OUT GOING FEEDERS

6 Nos 63 Amp TP MCCB 25 Ka No 1.00 PANEL-1 as above

22.00 PANEL-2 Plumbing Panel

INCOMER

One numbers 125 Amp ,36KA, 3 - pole , MCCB each havinghaving TMD rel + ROH

Phase indication R-Y-B. with MCB 2 ampMeteringg1 No Flush Digital Voltmeter with In built Selector Switch1 No Flush Digital Ammeter with Inbuilt Selector Switch3 Nos. CTs 150/5A, 15VA, CL-1 for metering.BUS-BARS


OUT GOING FEEDERS

10 HP DOL Starter : 2 Nos13-18 A 3 P MPCB25 Amp 3 P Power Contractor with 2 NO + 2 NC Aux. Contacts

6A SP 10 KA Control MCBON indicating Lamp set 220V Flush7.5 HP DOL Starter : 2 Nos7-14 A 3 P MPCB25 Amp 3 P Power Contractor with 2 NO + 2 NC Aux. Contacts

6A SP 10 KA Control MCBON indicating Lamp set 220V Flush

5.0 HP DOL Starter : 2 Nos6-10 A 3 P MPCB12 Amp 3 P Power Contractor with 2 NO + 2 NC Aux. Contacts


3.0 HP DOL Starter : 2 Nos4-6.3 A 3 P MPCB9 Amp 3 P Power Contractor with 2 NO + 2 NC Aux. Contacts




PANEL -2 as above No 1.00

23.00 PANEL -3 Fire Panel at TOP Terrace with Auto provision

INCOMER

One numbers 125 Amp ,36KA, 3 - pole , MCCB each havinghaving TMD rel + ROH

Phase indication R-Y-B. with MCB 2 ampMetering1 No Flush Digital Voltmeter with In built Selector Switch1 No Flush Digital Ammeter with Inbuilt Selector Switch3 Nos. CTs 150/5A, 15VA, CL-1 for metering.BUS-BARS


OUT GOING FEEDERS

15 HP DOL Starter : 2 Nos50 A 3 P MPCB40 Amp 3 P Power Contractor with 2 NO + 2 NC Aux. Contacts

over load relay6A SP 10 KA Control MCB PANEL-3 as above No 1.00

Fire Alarm System

24.00 Supply & Installation Testing, commissioning of 6loop (each loop125 detectors / 125 devices) wall recess / surface mounting microprocessor based expendable upto 7 loop Analog AddressableMain Fire Alarm Panel , Large LCD display minimum 320Characters Fully network able, 4 access levels. 1000 eventshistorical logging / flash EPROM , 240 Volts AC Power Supply,automatic battery charger, 24 volts sealed lead acid batterysuitable for 24 hour normal working and capable of operating thesystem for 30 minute in emergency condition. Shall integratedetectors, Control Relay modules, Monitor Module etc devicescomplete in all respect as required (Make : Honey well -808031+786002+804382 or approved equivalent)

Nos. 1.00

25.00 Supply & Installation Testing, commissioning of Repeater panel(LCD indicator panel) with 80 characters alpha numeric LCDdispaly connected with Main Fire Alarm panel complete asrequired (Make : Honey well - 785101 or approved equivalent)

Nos. 1.00

26.00 Supply & Installation Testing, commissioning of plug in typeintelligent photo electric addressable analog smoke detectorshaving inbuilt fault locator including cost of base plate , outlet boxfor fixing of detector base where required , mounting accessoriesetc. complete as required (Make : Honey well - 802371+805590or approved equivalent)

Nos. 637.00



27.00 Supply & Installation Testing, commissioning of Addressable typeintelligent Heat detector having inbuilt fault locator of rate of risecum fixed temperature analog including the cost of base plate,outlet box fixing of detector base where required , mountingaccessories etc. complete as required (Make : Honey well -802271 + 805590 or approved equivalent)

Nos. 51.00

28.00 Supply & Installation Testing, commissioning of dust and verminprotected Addressable Manual Call Point with Reset Lock toinitiate the audio alarm system complete as required (Make :Honey well - 804905+704900 or approved equivalent )

Nos. 27.00

29.00 Supply & Installation Testing, commissioning of addressable wall /ceiling mounting hooter (sound output of minimum 90 db cumstrobe strength of light 110 cd) & suitable to PA system alsocomplete as required (Make : Honey well - 807206 or approvedequivalent )

Nos. 27.00

30.00 Supplying, installation, Testing and commissioning of Addressablecontrol modules for Fire Fighters Telephone circuit

Nos. 22.00

31.00 Supplying, installation,Testing and commissioning of Addressablecontrol relay modules for AHU & stairs Pressurization Fan.

Nos. 10.00

32.00 Supplying, installation,Testing and commissioning of Addressablepp y g, , g gmonitor modules for Sprinkler Flow Switch and Door Holders

Nos. 10.00

33.00 Supplying, installation,Testing and commissioning of 2 waycommunication Fire Fighter's Telephone Jack Nos. 4.00

34.00 Supplying, installation,Testing and commissioning of 2 waycommunication Fire Fighter's Handset Nos. 4.00

35.00 Supply and laying of PVC insulated 8 core copper conductor un-armored cable 1100 Volt grade in cable tray / cable rack / falseceiling / on wall beam etc with proper clamp / saddle or to be laidunderground complete as required at site of following size 8 core1.5 sq. mm (Make : HAVELL or approved equivalent )

Mtrs 200.00

36.00 Supply of Providing and fixing of Photoluminescent Signage, non-radio active, maintenance free self-glowing, consisting of zincsulphide chargeable crystals which glows in dark. Signage madeup on 1mm thick aluminium sheet, weather proof and screenprinted, with U/V stabilised coating, job complete with mountingarrangement on wall with glass screws or to be hanged usingsuitable rust proof chains as per site requirement. The colourcombination and size of letters shall be as per I.S. 12349 amendedupto date. The Signage to be of following sizes:

37.00 Supply of Photo Luminiscent Signage of size: 14" x 6" Nos 60

38.00 Supply of Photo Luminiscent Signage of size: 18" x 8" Nos 60

P.A. & C.C.T.V. SYSTEM



39.00 The Voice Alarm Controller Having audio and control datatransmission, inbuilt memory for digital message recording andbroadcast & announcement to 12 zones, 16 priority levels &emergency, music to selected zones can be played. The system isconfigured using DIP switches for basic mode. External alarminputs/ programmable auto relay of prerecorded message/ alarmtones/ messages, with 12 contact trigger inputs for business &emergency calls freely programmable 255 messages can bestored in the internal 16 MB (Mega Bite) flash Read only memory itcan hooked to four BGM inputs and (ROM) individual BGM volumecontrol for each zone level of priorities, system can be integratedwith fire alarm panel, one no. hot stand by for amplifiers in case ofworking amplifier failure. Digital pre recorded emergencyevacuation messages can be broadcasted automatically in case ofemergency (Make: Bosch - BOSLBB1990 or approved equivalent.)

No 1.00

40.00 Supply, Installation, testing & commissioning of network router forconnection to the main controller and addition of upto six zonesand connectivity to call-stations complete as required as pertechnical specifications.(Make: Bosch - BOSLBB1992 or approvedequivalent.)

No 1.00

41.00 Supply, installation, testing & commissioning of Main Voice AlarmCall Stations of control room with High Quality goose neckCondenser Microphone along with 8 button keypad for six (6) zoneselection key and an all call key PTT Swith fault acknowledge and

t b f l ti b ddi k d l t blreset any number of zone selection by adding keypad selectablegain, speech filter & limiter for improved inteligibility with LEDindication for zone selection, fault & emergency state complete asrequired. (Make: Bosch - BOSLBB1949 or approved equivalent. )

No 1.00

42.00 Supply, Installation, testing & commissioning of voice alarm callstation Keypad for eight zone as per technical specifications.(Make: Bosch - BOSLBB1946or approved equivalent. )

Nos 2.00

43.00 Supply, installation, testing and commissioning of 480 W BoosterAmplifier for RMS power out put 70V/ 100V and 8 OHM out put 100V input for slave operation on 100 volts speaker lines also havingtemperature control in built fan for high reliability with sensitivity/level control complete as required with Digital interface to centralnetwork controller with following features : 480W Amplifier. (Make:Bosch - BOSLBD1938 or approved equivalent. )

No 1.00

44.00 Supply, installation, testing and commissioning of 4W ceilingspeakers with built in LMT suitable for both music and speechcomplete as required. (Make: Bosch - BOSLBD8351 or approvedequivalent. ) Nos 42.00

45.00 Supply, installation, testing and commissioning of 15W wallmounted speaker with built in LMT suitable for both music andspeech complete as required. (Make: Bosch - BOSLB2UC15L orapproved equivalent. ) Nos 240.00

46.00 Supply, installation, testing and commissioning of Volume ModularController (Make: Bosch - BOSLBC1400 or approved equivalent. )

Nos 282.00



47.00 Supply, installation, testing and commissioning of Back GroundMusic Source (BGM) with CD/ MP3 player, wireless remote controlas required. (Make: Bosch - BOSPLESDT or approved equivalent.) Nos 1.00

48.00 Supply, installation, testing and commissioning of indoor typeday/night color Vendal Dome camera with auto iris verifocal lenses600 TVL high resolution & above , 1/3-inch imager colour IRcamera with verifocal auto-iris lens (2.8.-10mm) includingConnectors, Lens, Power Supply and all ancillary equipmentrequired for the proper functiong of the camera. (Make : Honeywell - HDC - 6605 PVI or approved equivalent )

Nos. 56.00

49.00 Supply, installation, testing and commissioning of 16 channel realtime( No PC required ), 440 fps, stand alone Digital Video Recorder(DVR) with 1000 GB HDD & DVD W with USB port. ( Make :Honey well HD-16DVR-C or approved eqivalent )

Nos 4

50.00 Supply, installation, testing and commissioning of 21" HDMI portLED Monitor including all accessories for CCTV system. ( Make :LG - LN-21 or approved eqivalent ) Nos 2

51.00 S/E of floor standing DVR rack perforated 42 U 800 x 1000 mmwith PDU, cable manager hardware packet, fan tray with 4 fans &assembly tray rack with all accessories. No 1.00

52.00 S/E of Work station communication module consisting of Datasocket, HDMI port, USB port, RCA port and Aux port complete inall respect. Nos 130.00

11kV VCB Panel Board 53.00 Supplying, installation, testing & commsissioning of

indoor type floor mounted metal clad, 11 KV VCBpanel exendable type, totally enclosed IP-42 & fullyinterlocked, horizontal drawout, horizontal / verticalisolation type breaker as per IS 13118, as amended upto date and additonal general specification electricalworks (Part -IV CPWD), having 800A capacities,single break, trip free mechanisum, manually chargedand auto / manually closing breaker suitable for use on11 KV, 3 phase, 50 Hz AC supply with short circuitfault level of 350 MVA, complete with self contained,fully interlocked, rack in and rack out mechanisum, airinsulated but encapsulated copper bus bars of 800 ampscapacity.The breaker featured with mechanical ON/OFFindicator with hand trip device, spring release coil,shunt trip coil and auxiliary switch of 4 NO+4 NC i/cconnections suitable for bottom 3 core HT cable entry,H.T. danger notice plate and equipped with followingswitchgears and accessories Incoming VCB:



1 No. incoming VCB to have ( a) 11 KV/110 Volts PTclass 0.5 accuracy and 100 VA burdon with 1 No.voltmeter (0-15 KV ), digital type with inbuilt selectorswitch for voltmeter & protection MCB for HTmetering upto 12 KV on incomer. ( b) 1 No. 0-300Amp dual scale ammeter, digital type with inbuiltselector switches for ammeter. ( c ) 1 No.Microprocessor based Numerical relay with overload,earth fault & S.C. protection. (d) 1 No. Set of dual coredual ratio 3 CT's 300/150/5/5 A of 15 VA burdon &accuracy class 0.5 for metering & class 5 P10 forprotection. (e) To have phase sequence relay.

Out Going VCB each having:2 Nos. 0-100/50 Amp dual scale ammeter, digital type,1 No. Microprocessor based Numerical relay withoverload, earth fault & S.C. protection, Set of dual coredual ratio epoxy cast wound 3 CT's 100/50/5/5 A of 15VA burdon & accuracy class-1 for metering & class 5P10 for protection , Auxiliary Relay –OTI/WTI, TripCircuit Supervision relay, Master Trip relay with, Overtemprature Trip for transformer, hooter and indicators.

complete VCB panel as above No 154.00 Supplying, installation , testing & commsissioning of

POWER PACK with 220 volts AC input & 24 Volt DCcontinous output suitable for closing/tripping/indication of VCB panel board with 2 nos 12volts each Mtc free batteries of 100 AH each, floatcum boost thyristor comtrolled battery charger ,complete as per specifications and as required.,capacitor bank for emergency delivering for trip systemcomplete with suitable capacity of ammeter &voltmeter i/c connections with 2.5 mm sq FRLSinsulated copper conductor cable etc as required. No 1TRANSFOMER

55.00 Supplying, installation, testing & commsissioning of1000 KVA, 11/0.433 KV, 3 phase, 50 Hz, Dyn11,indoor ONAN type, copper wound transformer withOFF load tap changing arrangement on HV side insteps of +/- 2.5% to +/- 5% & -7.5%, losses as perECBC norms, having cable end boxes on HV sidesuitable for HT XLPE cable of 11 KV grade and 1600amp bus trunking arrangement on LV side completewith all accessories i/c first filling of filtereddehydrated oil and conforming to IS:2026 (Part-1 toPart-5) and as per CPWD electrical specification,complete in all respects including all protection &accessories as required at site. No 1

56.00 M.V.DISTRIBUTION BOARD



Supplying, installation, testing & commsissioning ofcubical extenable type, floor mounted LT panel madeof strucural modular sections suitable for 415 V, 3phase, 4 wire 50 Hz AC supply system & IP-42.Having required front area, fabricated incompartmentalized design from CRCA sheet steel of 2mm thick for frame work, partitions & door covers,3mm thick for gland plates i/c cleaning & finshingcomplete with 7 tank process for powder coating inapproved shade, having required Amp capacityextendable type TPN Aluminium Alloy bus-bar of highconductivty, SMC bus-bar supports, with short circuitwithstand capacity of 31 MVA for 1 Sec, bottom basechannel of MS section not less than 100mm x 50 mm x5mm thick, fabrication shall be done in transportablesections, entire panel shall have a common Al. earthbar of size 25mm x 5 mm at the rear with 2 nos earthstud, solid connections from main bus-bar to switchgears, top entry type, with required size of Al. bus-barto switch gears with required size of Al bus-bars &control wiring with 1.5/ 2.5 sq mm PVC insulatedcopper conductor S/C cable, cable alleys, cable gland

57.00 M.V.DISTRIBUTION BOARD FOR EXISTINGBUILDINGSINCOMERS

i Incomer for 630 KVA TransfomerOne No. 1250 Amps four pole horizontal drawout typeair circuit breaker of fault breaking capacity 50 KA (Ics= 100% Icu upto 415V), Microprocessor release,Manual operated, draw out, fitted with interlockeddoor, automatic safety shutters, mechanical ON/OFFand service/test/isolated position indicators and frameearthing contact, conforming to IS-13947-2/1993 asamended up-to-date complete with followingaccessories for each ACB:

Indepent manual spring closing mechanisum-1 NoDigital Volt meter with inbult selector switch & MCB -1 SetDigital Ammeter with inbult selector switch & one setof 3 CT of ratio 1250/5A class I accuracy and 15 VAburden- 1 Set3 Nos. Phase Indication LED lamps with toggle switchcontrol, with 2 Amp Backup MCB , Breaker 'ON'-'OFF'indicating light with 2 amp MCB , test terminal blockset, MCBs, circuits as per standard practice, auxiliarycontacts for positive interlocking of the breakers asrequired.Shunt trip coil 220 V A.C.

ii Incomer for 250 KVA DG setTwo Nos. 400 Amps four pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release.Two Nos. Power Contactor 400 Amp , 4 Pole Auto / Manual / Test / Off selector switch2 Nos Over voltage relay, 2 Nos reverse power relayand 2 Nos under voltage relay.3 Sets of Current Transfomer 15 P10 accurancy forprotection and 15 KVA class 1 for meteringEnergy analyser unit to indicate current voltagefrequency power factor and KWHIndicating lamps for load on mains and load on DG set.

2 amp MCB for instruments,



Main supply failure monitorSupply failure timerRestoration timerControl unit with three impulse automatic enginestart/stop and failure to start lockout.Impulse counter with locking and reset facilityON/OFF/Control Circuit switch with indicatorAudio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load / Maximum load warningControl cable/wiring from AMF panel to Engine

iii Incomer for 63 KVA DG setTwo Nos. 160 Amps four pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release.Two Nos Power Contactor 160 Amp , 4 Pole Auto / Manual / Test / Off selector switch2 Nos Over voltage relay, 2 Nos reverse power relayand 2 Nos under voltage relay.3 Sets of Current Transfomer 15 P10 accurancy forprotection and 15 KVA class 1 for meteringEnergy analyser unit to indicate current voltagefrequency power factor and KWHIndicating lamps for load on mains and load on DG set.

2 amp MCB for instruments,Main s ppl fail re monitorMain supply failure monitorSupply failure timerRestoration timerControl unit with three impulse automatic enginestart/stop and failure to start lockout.Impulse counter with locking and reset facilityON/OFF/Control Circuit switch with indicatorAudio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressureControl cable/wiring from AMF panel to Engine(iv) Engine fails to start(v) Full load / Maximum load warningControl cable/wiring from AMF panel to Engine

iv Interelocking: Mechanical (castel key) & Electricalinterlocking through advance contacts for all incomers& bus-couplers.Bus-bar

i Main Bus-bar : TPN aluminium bus-bars of minimumof 1600 amps capacity with heat shrinkable colouredsleeves and i/c SMC bus-bars supports at requiredintervals complete for cross section, size supports &their spacing etc withstanding fault level of 31 MVAfor 1 sec.

ii DG Bus-bar : TPN aluminium bus-bars of minimum of1000 amps capacity with heat shrinkable colouredsleeves and i/c SMC bus-bars supports at requiredintervals complete for cross section, size supports &their spacing etc withstanding fault level of 31 MVAfor 1 sec.Outgoings :-From DG Bus-bar 1000 A

i 7 nos 100 Amp 3 pole MCCB ii 3 nos 160 Amp 3 pole MCCB



iii 2 nos spare space for futureFrom Main Bus-bar 1600 A

i 4 nos 250 Amp 3 pole MCCB ii 4 nos 400 Amp 3 pole MCCB iii 2 nos spare space for future

all outgoing MCCBs to have:-a Ics=100%Icu=36 KA upto 415 V with Microprocessor

release b CT's of suitable ratio in set of 3 nos c With Digital ammeter meter with inbuilt selector

switch.d With panel mounted rotary extanded handle mechnism,

with expanders.M.V.DISTRIBUTION BOARD described as above

Job 158.00 M.V. DISTRIBUTION BOARD FOR ACADEMIC

TOWERINCOMERS

i Incomer for 1000 KVA TransfomerOne No. 1600 Amps four pole horizontal drawout typeair circuit breaker of fault breaking capacity 50 KA (Ics = 100%Icu upto 415 V),Microprocessor release ,Manual operated , draw out , fitted with interlockeddoor, automatic safety shutters, mechanical ON/OFFand service/test/isolated position indicators and frameearthing contact, conforming to IS-13947-2 1993 asamended up-to-date complete with followingaccessories for each ACB :

Indepent manual spring closing mechanisum-1 noIndepent manual spring closing mechanisum 1 noDigital Volt meter with inbult selector switch & MCB -1 setDigital Ammeter with inbult selector switch & one setof 3 CT of ratio 1600/5A class I accuracy and 15 VAburden- 1 set3 Nos. Phase Indication LED lamps with toggle switchcontrol, with 2 Amp Backup MCB , Breaker 'ON'-'OFF'indicating light with 2 amp MCB , test terminal blockset, MCBs, circuits as per standard practice, auxiliarycontacts for positive interlocking of the breakers asrequired.Shunt trip coil 220 V A.C.

ii Incomer for 250 KVA DG setTwo Nos. 400 Amps four pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release.Two Nos. Power Contactor 400 Amp , 4 Pole Auto / Manual / Test / Off selector switch2 Nos. Over voltage relay, 2 Nos reverse power relayand 2 Nos under voltage relay.3 Sets of Current Transfomer 15 P10 accurancy forprotection and 15 KVA class 1 for meteringEnergy analyser unit to indicate current voltagefrequency power factor and KWHIndicating lamps for load on mains and load on DG set.

2 amp MCB for instruments,Main supply failure monitorSupply failure timerRestoration timerControl unit with three impulse automatic enginestart/stop and failure to start lockout.Impulse counter with locking and reset facilityON/OFF/Control Circuit switch with indicator



Audio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load / Maximum load warningControl cable/wiring from AMF panel to Engine

iii Incomer for 125 KVA DG setTwo Nos. 200 Amps four pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release.Two No Power Contactor 200 Amp , 4 Pole Auto / Manual / Test / Off selector switch2 Nos Over voltage relay, 2 Nos reverse power relayand 2 Nos under voltage relay.3 Sets of Current Transfomer 15 P10 accurancy forprotection and 15 KVA class 1 for meteringEnergy analyser unit to indicate current voltagefrequency power factor and KWHIndicating lamps for load on mains and load on DG set.

2 amp MCB for instruments,Main supply failure monitorSupply failure timerRestoration timerControl unit with three impulse automatic enginestart/stop and failure to start lockout.Impulse counter with locking and reset facilityON/OFF/Control Circuit switch with indicatorA dio/Video ann nciation forAudio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load / Maximum load warningControl cable/wiring from AMF panel to Engine

iv Interelocking: Mechanical (castel key) & Electricalinterlocking through through advance contacts for allincomers & bus-couplers.Bus Coupler:One No.1250 Amps four pole, Manual operated ,drawout type, air circuit breakers of fault breakingcapacity 50 KA (Ics=100%Icu upto 433V) withinterlocked door, automatic safety shutters, mechanicalON/OFF and service/test/isolated position indicatorsand frame earthing contact conforming to IS-13947- 2-1993 as amended upto date complete with followingaccessories :

(a) Independent manual spring closing mechanism-INo. (b) Microprocessor release and indication for overcurrent, earth fault & short circuit protection -1 set ( c)Shunt trip coil 220 V A.C.(d) Breaker ‘ON’ -'OFF'indicating light with back up 2A HRC fuse testterminal block, fuses, circuits contactors for positiveelectrical interlocking of breakers, etc. as required.- 1set. Bus-bar



i Main Bus-bar : TPN aluminium bus-bars of minimumof 1600 amps capacity with heat shrinkable colouredsleeves and i/c SMC bus-bars supports at requiredintervals complete for cross section, size supports &their spacing etc withstanding fault level of 31 MVAfor 1 sec.

ii DG Bus-bar : TPN aluminium bus-bars of minimum of1000 amps capacity with heat shrinkable colouredsleeves and i/c SMC bus-bars supports at requiredintervals complete for cross section, size supports &their spacing etc withstanding fault level of 31 MVAfor 1 sec.Outgoings :-From DG Bus-bar 1000 A

i 1 no 100 Amp 3 pole MCCB ii 3 nos 160 Amp 3 pole MCCB iii 1 no 250 Amp 3 pole MCCB iv 1 no 400 Amp 3 pole MCCB v 2 nos spare space for future

From Main Bus-bar 1600 A i 3 nos 160 Amp 3 pole MCCBii 1 no 250 Amp 3 pole MCCB iii 1 no 400 Amp 3 pole MCCB iv 1 no 630 Amp 3 pole MCCB

v 2 nos spare space for futureall outgoing MCCBs to have:-

a Ics=100%Icu=36 KA upto 415 V with Microprocessorrelease

b CT's of suitable ratio in set of 3 nos c With Digital ammeter meter with inbuilt selectorc With Digital ammeter meter with inbuilt selector

switch.d With panel mounted rotary extanded handle mechnism,

with expanders.M.V.DISTRIBUTION BOARD described as above

Job 159.00 Automatic Power Factor Correction (APFC) panel

for exisiting buildings of 220 KVAR ( height &width should match with MV panels )Incomer One No. 400 Amps 3 pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release. Connected with soild inter-connection with MV panel.Digital Voltmeter PT Programmable LED Display,Aux 230 volts AC with Built in selector switch , -01NoDigital Ammeter CT Programmable LED Display,Aux 230 volts AC with Built in selector switch , &one set of 3 CT of ratio 400/5A class I accuracy and 15VA burden- 1 set3 Nos. Phase Indication LED lamps with toggle switchcontrol, with 2 Amp Backup MCB , Breaker 'ON'-'OFF'indicating light with 2 amp MCB , test terminal blockset, MCBs, circuits as per standard practice, auxiliarycontacts for positive interlocking of the breakers asrequired.Shunt trip coil 220 V A.C.1 No. Varilogic APFC relay-Classic Range 12 step,440V, 5A,( 144x144mm ) including sensing CT's.Bus-bar



Main Bus-bar : TPN aluminium bus-bars of minimumof 600 amps capacity with heat shrinkable colouredsleeves and i/c SMC bus-bars supports at requiredintervals complete for cross section, size supports &their spacing etc withstanding fault level of 31 MVAfor 1 sec.Outgoings :-Capacitor 220 KVAR MPP-H Cylindrical Typecapacitor with Metallised Polypropylene film as perdetail:

i 4 x 25 KVArii 4 x 20 KVAriii 2 x 15 KVAriv 1 x 10 KVAr

Each Capacitor Bank to have following accessories asper their capacity:-

a Accessories for each 25 KVAR capacitor Bank :- 100Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 25 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

b Accessories for each 20 KVAR capacitor Bank :- 63Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 20 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

c Accessories for each 15 KVAR capacitor Bank :- 40Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 15 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

d Accessories for each 10 KVAR capacitor Bank :- 32Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 10 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

Ventilating fans of required size to dissipiate the heatliberated by capacitor.APFC panel described as above Job 1

3.40 Automatic Power Factor Correction (APFC) panelof 270 KVR for ACADEMIC TOWER ( height &width should match with MV panels )Incomer One No. 400 Amps 3 pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release. Connected with soild inter-connection with MV panel.Digital Voltmeter PT Programmable LED Display,Aux 230 volts AC with Built in selector switch , -01NoDigital Ammeter CT Programmable LED Display,Aux 230 volts AC with Built in selector switch , &one set of 3 CT of ratio 400/5A class I accuracy and 15VA burden- 1 set



3 Nos Phase Indication LED lamps with toggle switchcontrol, with 2 Amp Backup MCB , Breaker 'ON'-'OFF'indicating light with 2 amp MCB , test terminal blockset, MCBs, circuits as per standard practice, auxiliarycontacts for positive interlocking of the breakers asrequired.Shunt trip coil 220 V A.C.1 No. Varilogic APFC relay-Classic Range 12 step,440V, 5A,( 144x144mm ) including sensing CT's.Bus-barMain Bus-bar : TPN aluminium bus-bars of minimumof 600 amps capacity with heat shrinkable colouredsleeves and i/c SMC bus-bars supports at requiredintervals complete for cross section, size supports &their spacing etc withstanding fault level of 31 MVAfor 1 sec.Outgoings :-Capacitor 270 KVAR MPP-H Cylindrical Typecapacitor with Metallised Polypropylene film as perdetail:

i 1 x 50 KVAr ii 4 x 25 KVAriii 4 x 20 KVAriv 2 x 15 KVArv 1 x 10 KVAr

Each Capacitor Bank to have following accessories asper their capcity:-

a Accessories for each 50 KVAR capacitor Bank :- 125Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 50 Kvar havingg C p y C gdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

b Accessories for each 25 KVAR capacitor Bank :- 100Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 25 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

c Accessories for each 20 KVAR capacitor Bank :- 63Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 20 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

d Accessories for each 15 KVAR capacitor Bank :- 40Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 15 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

e Accessories for each 10 KVAR capacitor Bank :- 32Amp,36 KA TP MCCB of fixed thermal magneticsetting with Capacitor Duty Contactor 10 Kvar havingdamping resistors which limit inrush Current at 440volt ,3ph,50 Hz, Coil-220 Vac, ON/OFF push button,ON/OFF Led indicator &Auto/Manual selector switch.

Ventilating fans of required size to dissipiate the heatliberated by capacitor.



APFC panel described as aboveJob 1

60.00 Out-Door unit Panel for VRV systema INCOMER

One No. 160 Amp ,36KA, 3 - pole , MCCB eachhaving having Micropressor rel + ROH Phase indication R-Y-B. with MCB 2 ampMetering1 No. Flush Digital Voltmeter with In built SelectorSwitch1 No. Flush Digital Ammeter with Inbuilt SelectorSwitch3 Nos. CTs 160/5A, 15VA, CL-1 for metering.1 No. single phase preventer

b BUS-BARSOne No. of Electrolytic high conductivity T P & NAluminum conductor bus-bars rated 200 Amps

c OUT GOING FEEDERS4 Nos. 63 Amp 4 pole MCCB All outgoing MPCBs to have:-Ics=100%Icu=36 KA upto 415 V with Microprocessorrelease CT's of suitable ratio in set of 3 nos With Digital ammeter meter with inbuilt selectorswitch.With panel mounted rotary extanded handle mechnism,with expanders.Complete Panel as above Job 1

61 00 Basement Ventilation Panel61.00 Basement Ventilation Panela INCOMER

One No. 50 Amp ,36KA, 3 - pole , MCCB each havinghaving Micropressor rel + ROH Phase indication R-Y-B. with MCB 2 ampMetering1 No. Flush Digital Voltmeter with In built SelectorSwitch1 No. Flush Digital Ammeter with Inbuilt SelectorSwitch3 Nos. CTs 250/5A, 15VA, CL-1 for metering.1 No. single phase preventer PLC logic controller

b BUS-BARSOne Number of Electrolytic high conductivity T P & NAluminum conductor bus-bars rated 300 Amps

c OUT GOING FEEDERS15 Nos 10HP DOL Starter compartment & eachconsisting of13 - 18A 3P MPCB25A 3P Power Contactor with 2NO+2NCAux.Contacts6A SP 10kA Control MCBON Indicating Lamp (set) - 220V AC LEDStart-Stop Push Buttons (set) - Flush MtdPower and Control Terminal Blocks (set)32A Neutral Link - FNL325 Nos 15HP DOL Starter compartment & eachconsisting of17 - 13A 3P MPCB25A 3P Power Contactor with 2NO+2NCAux.Contacts6A SP 10kA Control MCB



ON Indicating Lamp (set) - 220V AC LEDStart-Stop Push Buttons (set) - Flush MtdPower and Control Terminal Blocks (set)32A Neutral Link - FNL32all outgoing should also have:-Ics=100%Icu=15 KA upto 415 V or aboveCT's of suitable ratio in set of 3 nos With Digital ammeter meter with inbuilt selectorswitch.With panel mounted rotary extanded handle mechnism,with expanders.Complete Panel as above Job 1

62.00 Streel light PanelSheet metal cubical pedestal IP-65 with MS sheet toprain cover of suitable dimention made from 50mm x50mm x 6mm thick MS angle frame, covered with3mm thick MS sheet duly welded on five sides andfront side hinged, complete with locking arrangementwith 6 nos switchgear supporting members each of MSflat 50mm x 6 mm thick of suitable length duly welded.The cubical pedestal shall have 4 nos legs of 50mm x50mm x 6mm thick MS angle iron each 60cm longincluding painting, bonding to the existing earth etc.The Cubical size 1200mm high, 900 mm wide and 350mm deep. The cubical pedestal shall have 4 nos legsof 50mm x 50mm x 6mm thick MS angle iron each60cm long including painting, bonding to the existingearth etc. The same shall be erected in 1:2:4 cementconcrete plat-form of suitable dimensions 30 cm highfrom ground level and 45cm thick. The cubical pedestalfrom ground level and 45cm thick. The cubical pedestalshall be 30 cm from the top of cement concrete plat-form.

i Incomer for normal & solar supplyTwo Nos.100 Amps four pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release.Two No Power Contactor 100 Amp , 4 Pole Auto / Manual / Test / Off selector switch2 Nos Over voltage relay and 2 Nos under voltagerelay.3 Sets of Current Transfomer 15 P10 accurancy forprotection and 15 KVA class 1 for meteringIndicating lamps for load on mains and load on solar2 amp MCB for instruments,Main supply failure monitorSupply failure timerRestoration timer

iii Incomer for 125 KVA DG setTwo Nos. 200 Amps four pole MCCB of fault breakingcapacity 36 KA ( Ics = 100%Icu upto 415V),Microprocessor release.Two Nos. Power Contactor 200 Amp , 4 Pole Auto / Manual / Test / Off selector switch2 Nos Over voltage relay and 2 Nos under voltagerelay.3 Sets of Current Transfomer 15 P10 accurancy forprotection and 15 KVA class 1 for meteringEnergy analyser unit to indicate current voltagefrequency power factor and KWHIndicating lamps for load on mains and load on solarsupply.2 amp MCB for instruments,Main supply & Solar Supply failure monitor



Astronomical time switch for automatic switching On& OFF of street ights at sun set & sun rise ortwilight(Auto ON, Auto OFF, Auto modes) withmanual override facility with 12/24 hour display formatwith suitable battery and indication for relay status i/cprogramming at site complete as required.Control unit with three impulse automatic enginestart/stop and failure to start lockout.ON/OFF/Control Circuit switch with indicatorControl wiring Interelocking: Mechanical (castel key) & Electricalinterlocking through through advance contacts forincomers Bus-bar

i Bus-bar : TPN aluminium bus-bars of minimum of 100amps capacity with heat shrinkable coloured sleevesand i/c SMC bus-bars supports at required intervalscomplete for cross section, size supports & theirspacing etc withstanding fault level of 31 MVA for 1sec.Outgoings :-

i 2 nos. 32 Amp 3 pole MCB ,10 kaii 18 nos 10 Amp Single pole MCB , 10 Ka

M.V.DISTRIBUTION BOARD described as aboveJob 1

63.00 UPS panela INCOMER

One No. 250 Amp ,36KA, 3 - pole , MCCB eachhaving having Micropressor rel + ROH Phase indication R-Y-B. with MCB 2 ampC pMetering1 No. Flush Digital Voltmeter with In built SelectorSwitch1 No. Flush Digital Ammeter with Inbuilt SelectorSwitch3 Nos. CTs 250/5A, 15VA, CL-1 for metering.1 No. single phase preventerFour Nos.250 Amp ,36KA, 3 - pole , MCCB eachhaving having Micropressor rel + ROH Phase indication R-Y-B. with MCB 2 amp

b BUS-BARSTwo Nos. Electrolytic high conductivity T P & NAluminum conductor bus-bars rated 300 Amps

c OUT GOING FEEDERS17 nos 32 Amp 2 pole MCB ,10 kaComplete Panel as above Job 1

64.00 D.G. SETSProviding, Installation, Testing & Commissioning of'Silent Type' Diesel Generating Set along with havingprime power rating of 125 KVA, 415 volts suitable for50 Hz, 3 phase system & for 0.85 Load Factor andconsisting of following :

(a) Diesel Engine :Diesel Engine 4 stroke water cooled, electric start, ofsuitable BHP at 1500 rpm suitable for above output ofalternator at 40 Degree C, 50% RH & at 1000 MeterMSL and confirming to BS : 649 , IS : 10000, capableto taking 10% over loading for 1 hr after 12 hours ofcontinous operation. The engine will be fittted completewith all the required accessories.

(b) Engine mounted Instrument Panel fitted with andhaving digital display for following :



(i) Start - stop switch with key(ii) Water Temperature indication.(iii) Lubrication oil pressure indication(iv) Lubrication oil temperature indication.(v) Battery charging indication(vi) RPM indication(vii) Over speed indication(viii) Low lub. Oil trip indication(ix) Engine Hours indication

(c) Alternator :Synchronous alternator rated at 125 KVA, 415 volts at1500 RPM, 3 phase 50 Hz, AC supply with 0.8 laggingpower factor at 40 Degree C, 50% RH & at 1000 MeterMSL. The alternator shall be having SPDP enclosure,brushless, continous duty, self-exicted and selfregulated through AVR conforming to IS : 4722/ BS2613 suitable for tropical conditions and with class-F/Hinsulation.

(d) Base Frame & Foundation :Both the engine and alternator shall be mounted onsuitable base frame made of MS channel with necessary reinforcement which shall be installed on suitablecement concrete foundation and vibration isolationarrangement as per recommendations of manufacturer.

(e) Fuel Tank :Daily service fuel tank of capacity minimum 8 hourworking in a day at full load fabricated out of 3 mmthick MS sheet complete with all standard accessoriesand fuel piping between fuel tank and diesel engineand fuel piping between fuel tank and diesel enginewith MS class 'C' pipes of suitable dia. Complete withvalves level indications and accessories as required asper specifications.

(f) Exhaust System :Dry exhaust mainfold with hospital exhaust silencerand catalytic converter.

(g) Starting System12/24 DC starting system comparing of starter motors :voltage regulator and arrangement for initial excitationcomplete with suitable nos of batteries ( 25 plates, 180Amp. Hour capacity lead acid type ) as required as perspecifications.

(h) Accoustic and weather proof enclosure witharrangement for fresh air intake for cooling of theengine & alternator, extraction, discharging hot air in tothe atmosphere as per specifications.

(i) Battery charger, complete with transformer/rectifier,Digital D.C. voltmeter and ammeter, selector switchfor trickle, off and boost and current adjustment.

125 KVA DG set Complete as per above Job 1

65.00 Providing, Installation, Testing & Commissioning of'Silent Type' Diesel Generating Set along with havingprime power rating of 250 KVA, 415 volts suitable for50 Hz, 3 phase system & for 0.85 Load Factor andconsisting of following :

(a) Diesel Engine :



Diesel Engine 4 stroke water cooled, electric start, ofsuitable BHP at 1500 rpm suitable for above output ofalternator at 40 Degree C, 50% RH & at 1000 MeterMSL and confirming to BS : 649 , IS : 10000, capableto taking 10% over loading for 1 hr after 12 hours ofcontinous operation. The engine will be fittted completewith all the required accessories.

(b) Engine mounted Instrument Panel fitted with andhaving digital display for following :(i) Start - stop switch with key(ii) Water Temperature indication.(iii) Lubrication oil pressure indication(iv) Lubrication oil temperature indication.(v) Battery charging indication(vi) RPM indication(vii) Over speed indication(viii) Low lub. Oil trip indication(ix) Engine Hours indication

(c) Alternator :Synchronous alternator rated at 250 KVA, 415 volts at1500 RPM, 3 phase 50 Hz, AC supply with 0.8 laggingpower factor at 40 Degree C, 50% RH & at 1000 MeterMSL. The alternator shall be having SPDP enclosure,brushless, continous duty, self-exicted and selfregulated through AVR conforming to IS : 4722/ BS2613 suitable for tropical conditions and with class-F/Hinsulation.

(d) Base Frame & Foundation :Both the engine and alternator shall be mounted onsuitable base frame made of MS channel with necessarysuitable base frame made of MS channel with necessary reinforcement which shall be installed on suitablecement concrete foundation and vibration isolationarrangement as per recommendations of manufacturer.

(e) Fuel Tank :Daily service fuel tank of capacity minimum 8 hourworking in a day at full load fabricated out of 3 mmthick MS sheet complete with all standard accessoriesand fuel piping between fuel tank and diesel enginewith MS class 'C' pipes of suitable dia. Complete withvalves level indications and accessories as required asper specifications.

(f) Exhaust System :Dry exhaust mainfold with hospital exhaust silencerand catalytic converter.

(g) Starting System12/24 DC starting system comparing of starter motors :voltage regulator and arrangement for initial excitationcomplete with suitable nos of batteries ( 25 plates, 180Amp. Hour capacity lead acid type ) as required as perspecifications.

(h) Accoustic and weather proof enclosure witharrangement for fresh air intake for cooling of theengine & alternator, extraction, discharging hot air in tothe atmosphere as per specifications.

(i) Battery charger, complete with transformer/rectifier,Digital D.C. voltmeter and ammeter, selector switchfor trickle, off and boost and current adjustment.

250 KVA DG set Complete as per above Job 1



66.00 Supplying and fixing exhaust gas piping of suitable dia.Welded black MS, B Class pipe confirming to IS : 3589 cut to required lengths and installed with necessarybends, supports and clamps, anti-vibration mountings,insulation of exhaust system with mineralwool/Rockwool, 50 mm thick wiremesh & aluminiumclading etc as required as per specifications. Mtrs 30

67.00 MV CABLE SUPPLYSupply of XLPE insulated PVC sheathed ( Heavy duty) armoured electric cable with aluminium conductorfor working voltage of 1100 volts confirming to IS :7098 ( Part- I ).

67.01 3½C x 35 sq. mm Mtr 15067.02 3½C x 95 sq. mm Mtr 6067.03 3½C x 150 sq. mm Mtr 33067.04 3½C x 240 sq. mm Mtr 37067.05 3½C x 400 sq. mm Mtr 180

68.00 HT CABLE SUPPLYSupply of earthed armoured, Aluminium Conductor,XLPE insulated power cable of 11 KV gradeconforming to IS: 7098 (Part-II) amended upto date ofthe following sizes.

68.01 i 3C x 120 sq.mm. Mtr 2068.02 ii 3C x 240 sq.mm. Mtr 40

FIRE & ELECTRICAL SHOCK SAFETYEQUIPMENTSPortable Chemical Fire Extinguishers & safety

69.00Portable Chemical Fire Extinguishers & safetyequipmentsSupplying & Fixing of following capacity CarbonDioxide (CO2) Type Fire Extinguisher ISI Markedwith following specifications fully charged havingsafety valve, discharge hose & horn complete in allrespects as required.4.5Kgs with 1 mtr hose horn ( ISI Marked IS 15683 :2006) No 2

70.00 Supplying & Fixing ABC Type Fire Extinguisher 4Kgs. Capacity ISI Marked IS: -15683 : 2006 filled withMAP 90% ABC powder complete in all respect asrequired. No 2

71.00 Supply and fixing ABC type Modular fire extinguishersceiling mounted 25 kg capacity No 1

72.00 Supplying and installing at approved location approvedmake fire buckets 6 nos of 24 gauge galvanized steelsheet, standard 9 litre capacity and of round bottomshape, painted white inside and red outside andblack on the bottom, inscribed with letters “FIRE” inblack and gold. Cost shall be inclusive of providing MSstand duly painted over a coat of primer.

No 1

73.00 Supplying and fixing 1000mm x 2000mm wide x15mmthick rubber matting (complying with ISS) and suitableto with stand 11KV as required. No 8

74.00 Supplying and fixing standard shock treatment chart inEnglish & Hindi mounted on wooden frame with glass.

No 1



75.00 Supplying & fixing First Aid Box for HV complete asapproved by St. John Ambulance or Indian Red Cross.

No 1

76.00 Supplying & fixing ruber glooves (11 KV rating) set 1

77.00 Supplying & laying in ground at 1mtr below groundlevel one number pope and additional by brick spacerHigh density polyline pipe (HDPE) havingconfiguration on the outer wall and plain surface innerwall confirming to ISI specifications with necessaryHDPE fitting for protection of 1.1KV gradeunderground cable complete.

77.01 50/38mm (OD/ID) Mtrs 10077.02 63/51mm (OD/ID) Mtrs 15077.03 68/63mm (OD/ID) Mtrs 10077.04 90/76 mm (OD/ID) Mtrs 15077.05 120/103mm (OD/ID) Mtrs 35077.06 180/152mm (OD/ID) Mtrs 300

78.00 Supply, installation, testing and commissioning of thefollowing lighting fixtures:Street lighting luminaries with single piece die castaluminum housing pre-wiried gear tray with LED &driver having voltage bend of 120-270 volts having aP.F. more than 0.9 of total approximate system wattage40W and toughened heat resistant flat glass silicongasketed for IP-65 protection and all other accessoriescomplete in all respect equivalent to Wipro Make LR01-024-XXX-WH-XX or other approved make (suitable024 XXX WH XX or other approved make. (suitablefor street lights) Nos 18

79.00 Fantasy bollard with housing in die cast aluminum withUV stabilized poly carbonate diffuser suitable for LEDincluding other fixing accessories in staggered patternafter 4 mtrs around the paving of Min 0.70 mtrs heightfrom GL with suitable foundation equivalent to WiproMake LB10-003-360-WH-08 or other approved make.(using for Garden lights) Nos 4

80.00 Street lighting luminaries for post top lartern 70W MHsingle piece die cast / Extruded aluminum housing forIP-65 protection and all other accessories includinglamp complete in all respect Equivalent to Philips MakeHPS360 1xMHNTD70W GR or other approved make.(suitable for Land escaping / green area / parking)

Nos 24

MS Tubular ( Decorative ) Poles & Accessories81.00 Supply, installation of 7 Mtr GI OCTAGONAL POLE

as per dimension-Top dia - 90mm, Bottom Dia -165mm, Thick-3.5 mm.Base Plate-260mm x 260mm x16mm, PCD -250mm., Foundation Bolt- 20mm. Dia x700mm. long (4Nos.) with junction box & Single ArmBracket (25-27mm OD GI pipe, 1000mm) on RCCfoundation for above pole and depth of foundation shallbe as per soil condition. Nos 18



81.00 Supply, installation of 4.0 Mtr GI POLE with 105 ODGI Pipe Thick-3.5mm. Base plate-200mm x 200mm x10mm, PCD -200mm., Foundation Bolt- M16 x 500(4Nos.) with external Junction Box for fixing ElectricalAccessories on RCC foundation for above pole anddepth of foundation shall be as per soil condition.

Nos 24

82.00 Supplying & laying in existing trunch directly in ground at 1mtr below ground level one number High densitypolyline pipe (HDPE) having configuration on the outerwall and plain surface inner wall confirming to ISspecifications with necessary HDPE fitting forprotection of 1.1KV grade underground cable.50/38mm (OD/ID) Mtrs 700

83.00 Supply of XLPE insulated PVC sheathed (Heavy duty)armoured electric cable with aluminium conductor forworking voltage of 1100 volts confirming to IS : 7098 (Part- I ). Size 4x16 mm sq Mtrs 700

SOLAR POWER 84.00 Design, Supply, Installation, Testing & Commissioning of

50 KWp rooftop Solar Power Plant on terrace at ZakirHusain Delhi College, New Delhi complete in all respectwith following items as per technical specification.

(a) Solar Photovoltaic Module

Solar PV module array of minimum capacity output not beless than 50 KWp after invertor on max. radiation day andh ld i f l / l i lli d lshould comprise of solar mono / multi crystalline modules

of minimum 250 Wp and above wattage without negativetolerance.

The degradation of modules should not more than 10% inten years in Indian climatic conditions with min 5 yearwarranty.

Each frame of the module of corrosion-resistance anodizedextruded aluminium & electrolytically compatible with thePV panel structural material used for mounting the modules.

Each module have a junction box with provision of externalscrew terminal connection and with arrangement forprovision for by-pass diode. The box also have hinged,weather proof lid with captive screws and sealed type cablegland.

The Photovoltaic modules must be tested & approved byone of the IEC authorized test centers, test certificates canbe from any of the NABL / BIS accredited testing /calibration laborites the module type must be qualified asper IEC 61215 (Second Edition) or IEEE 1262 or CEC 503.In addition PV modules must qualified to IEC 61730 Part Ito II for safety qualification testing.

(b) PV Panel Structures (Array Structure)PV panel structures complete with all members for allowingeasy installation at the rooftop site made of hot dippedGalvanized Mild Steel (ASTM A-123) with its stainlesssteeel fasteners, nuts and bolts grouted with M15 (1:24)concrete able to withstand a wind load of 180km/hr.

The front end of the solar array must be one meter above therooftop. The structures shall be designed to allow easyreplacement of any module. Each structure shall have aprovision to adjust its angle of inclination to the horizontalas per the site conditions.

© Power Conditioning Unit (Solar Inverter)



Power Conditioning Unit (Solar Inverter) 2 Nos. 30 KVAIGBT based Microprocessor Controlled with parallelredundant provision up to 4 Nos, Double conversion withLCD digital display & Inbuilt double wound isolationtransformer in ip-31cabinet to convert DC power producedby SPV modules into AC power and adjust the voltage andfrequency levels to work in parallel with LT bus bar 440volts 3 phase supply and share the load according to thepower generated by the solar panels with an intelligentprovision to have battery bank charging from dual-sourceand to meet the critical load requirement during powerfailure.

Data logging system to be provided to capture the data fromSolar Inverter and Energy meter. Solar Irradiance: An integrating Pyranometer (Class II orbetter) with the sensor mounted in the plane of the arrayintegrated with data logging, system.

Temperature probes for recording the Solar paneltemperature and ambient temperature.

(d) Battery Bank & Accessories

Battery bank storage capacity : 600Ah/240V capacity bysuitable nos of Tubular Gel maintenance free Battery,positive tubular plate, tubular gel valve regulated lead acid(VRLA) type batteries of 2 Volts cell as per IS 15549, IS1651/IS 13369 and IEC 61427 with Appropriate Cabinets /Reck for battery banks, with the provision of acid prooftrays for batteries and Battery interconnections link & cable,complete in all respect .

(e) DC Distribution Board

DC Distribution panel to receive the DC output from thearray field with analog measurement panel for voltagearray field with analog measurement panel for voltage,current from different AJBs so as to check any failure in thearray field. It shall have MCCBs of suitable rating forconnection and disconnection of array sections. DCDB shallbe fabricated from CRC sheet from enclosure of dust &vermin proof.

(e) Common AC Distribution Panel Board

Common AC Distribution Panel Board (DPB) shall controlthe AC power from inverter AC Distribution panel shouldconsist of 1 No. 100 Amps MCCB with 25 KA breakingcapacity as incomer and 2 Nos. 63 Amps MCCB with 16KA breaking capacity out going switches. The panel shouldbe provided 3 Phase copper bus bar of suitable capacity.There shall also be the provision for remote switching sothat the delivered power can be controlled from acentralized Push Button (PB) station which is called PlantControl Unit.

Common AC DPB shall have the arrangement for measuring all electrical quantities such as Voltage, Current, Frequencyof different feeder line & energy supplied to the differentfeeder. Common AC DPB shall have sheet iron enclosure ofdust & vermin proof & shall have adequate coolingarrangement. The bus-bars are to be made of copper ofdesired size. Design & Drawing is to be submitted beforemanufacturer assembly on installation for obtainingnecessary approval from Engineer-in-Charge.

Common AC DPB must have arrangement for bus couplerin between 2 incoming sources from AC grid and Inverter.

The panel should have space for 3 Phase AC trivectorenergy meter to be provided by the department.

(f) Cables:-



Suitable sizes of cable, ISI / EN/ IEC marked XLPEinsulted, Solar PV approved Copper Conductor Cable asper load & site requirement for connecting all the modules/ arrays to Junction Boxes and from Junction Boxes to DCdistribution box and from DC distribution box to invertorand from Invertor to AC distribution box on suitablymounted cable trays with cover. The cable end terminationwith copper lugs with compression cable gland afterferules.

1C x 4 Sq. mm. Solar PV IS/EN/IEC approved Cu cable

2C x 10 Sq. mm. XLPE insulated Cu cable



All cable schedules/layout drawings have to be got approvedfrom the Engineer-in-charge prior to installation.

(g) Earthing & Lighting Protection

Each array structure of the PV yard should be grounded /earthed properly as per IS:3043-1987. In addition thelighting arrester / masts should also be provided inside thearray field. Provision should be kept for shorting andgrounding of the PV array at the time of maintenance work.All metal casing / shielding of the plant should bethoroughly grounded in accordance with Indian electricityAct. / IE Rules. Earth Resistance should be tested inpresence of the representative of Department after earthingby calibrated earth tester. All the existing earth station willbe used & lightening arrestors will already installed in thebuilding.

(h) Jet Pump ¼ HP1 No. 0.5HP, BIS approved surface pump shall be installed.Suitable Nos of water outlets shall be provided through C-class ISI Marked GI Pipes with flexible water pipe forcleaning of the modules.

TOTAL OF ELECTRICAL WORKS (PART E)

1.00 VARIABLE REFRIGERATNT FLOW (VRF) SYSTEMSupply, Installation, Testing and Commissioning ofModulating outdoor units, with multi scroll compressors(minimum two compressors) with one capacity controllingcompressor and other constant speed type compressor,special pre-coated fins, panel, corrosion resistant (suitable forsite installation) coated condenser, inverter based condenserfan M.S. hot dip galvanised stands / supports, electrical &microprocessor panel, including first charge of regrigent R-410-A, isolating valves and all the necessary accessories forproper functioning of the units, having following approximatecapacities. Minimum COP shall be 3.5 (100% Load). VRFunit shall be BMS compatible and open protocol to beprovided for interfacing..

Capacity of Outdoor Units as listed below1.01 24 HP No 1

1.02 22HP No 2

2.00 Supply, installation, testing and commissioning of VRF basedindoor units complete with remote and all accessories,Vibration isolators supports, Cordless remote & Y joint etccomplete in all respect.Capacity of Indoor Unit

2.01 5.6 HP Ceiling Mounted Duct Type No 22.02 8.0 HP Ceiling Mounted Duct Type No 4

NON-SCHEDULE ITEMS (HVAC) SCHEDULE -F

Job 1



2.03 10.0 HP Ceiling Mounted Duct Type No 4

3.00 Supply, insallation, testing of interconnecting refrigerantpipe including fittings & joints work with (19mm/13 mm thick)closed cell elastomeric nitrile rubber tubular insulationbetween each set of indoor & outdoor units as perspecifications, all piping inside the building shall beproperly supported. All exposed refrigerent piping shall becoated with weather proof protection.

3.01 34.9 mm OD ( insulation 19mm) Mtrs 303.02 28.58 mm OD ( insulation 19mm) Mtrs 803.03 22.2 mm OD ( insulation 13mm) Mtrs 1003.04 19.05 mm OD ( insulation 13mm) Mtrs 1003.05 15.88 mm OD ( insulation 13mm) Mtrs 803.06 12.7 mm OD ( insulation 13mm) Mtrs 803.07 9.52 mm OD ( insulation 13 mm ) Mtrs 150

4.00 Supply, fabrication, installation and testing the flexibleconnections constructed of fire resistant double resinconvass sleeve connection with filters as per the approvedshop drawings. Set 30

5.00 Supply, installation, testing and commissioning of AXIALFLOW FAN complete with Hot dipped Galvanised SteelCasing, adjustable pitch die cast aluminium impeller (Huband blades), totally enclosed fan cooled motor belt drive,multi sheaved pulley mounted on motor suitable for415±10%V, 50Hz AC supply, fan shaft, belt guard, motormount vibration isolators spun flanges on both ends andmount, vibration isolators, spun flanges on both ends andsound attenuators as required. The fan shall be selected forlow noise level and low RPM (less than 1000 RPM) Fanmotor shall be suitable for 415+ 10% volts, 50 cycles, 3phase power supply.

Fresh air or Make up air Fan capacity 23500- 25500 CFMbased on minimum 20 mm static pressure equivalent toFan Model of Systemair make: AXC 1000-5 / 16° or 17° - 4 -7.5 KW /10 HP or approved equivalent )

No 7

6.00 Fire rated exhaust Fan capacity 17000- 21000 CFM basedon minimum 20 mm static pressure. The Fan assemblyalong with motors should be tested for Temperature range:300 deg/2Hours for Smoke Evacuation . Equivalent to FanModel of Systemair make : AXC 1000-5 / 16° or 17° - 4(B) -7.5 KW /10 HP or approved equivalent )

No 8

7.00 Fire rated exhaust Fan capacity 26500- 27000 CFM basedon minimum 20 mm static pressure . The Fan assemblyalong with motors should be tested for Temperature range:300 deg/2Hours for Smoke Evacuation. Equivalent to FanModel of Systemair make : AXC 1000-5 / 19° - 4(B) - 11.0KW /15 HP or approved equivalent )

No 5TOTAL OF HVAC WORK (PART F)

abstract of boq - rites and contract document name of work: construction of multistoried academic...

Documents