User Manual Windows & Macintosh

V1.02

1

Table of the Contents

About This User’s Manual .........................2

Notes for This Manual ...............................2

Safety Information .....................................3

Care and Cleaning .....................................3

1. Product Introduction..............................4

Package Contents.................................5

Tablet ....................................................6

Digital Pen ............................................8

2. Getting Started .......................................10

Installation........................................... 11

Windows ...................................... 11

Mac OS........................................13

Configuration ......................................17

Windows ......................................17

Mac OS........................................37

3. Using the Tablet ...................................50

Holding the Pen ..................................51

Working Area ......................................52

Positioning ..........................................53

Clicking ...............................................54

Dragging .............................................55

Pressure Control.................................56

4. Using the Bundled Software ............... 57

System Requirements......................... 58

Introduction to Tablet Software ........... 59

Supporting Operating Systems ........... 60

Installing Tablet Software .................... 61

Uninstalling Tablet Software................ 63

5. Specification Summary ....................... 64

Tablet .................................................. 65

Digital Pen .......................................... 66

6. Troubleshooting...................................67

Testing your device ............................. 68

FAQ .................................................... 70

Service and Technical Support ........... 72

Driver Download ................................. 72

Appendix ..................................................73

Declarations and Safety Statements... 74

FCC ............................................. 74

CE................................................ 74

Ordering Components and

Accessories ...................................... ..75

Copyright Information ......................... 76

Limitation of Liability............................ 76

2

About This User ’s Manual You are reading the Kanvus Life H85 Graphic Tablet User Manual. This Manual provides

information regarding the components in the Kanvus Graphic Tablet and how to use them. The

following are major sections of this User’s Manual :

1. Product Introduction

Provides information on the Kanvus Graphic Tablet’s components.

2. Getting Started

Provides information on getting started with the Kanvus Graphic Tablet.

3. Using the Tablet

Provides information on using the Kanvus Graphic Tablet.

4. Using the Bundled Software

Provides information on using the Kanvus Graphic Tablet’s utility.

5. Specification Summary

Gives you specifications summary of Kanvus Graphic Tablet.

6. Troubleshooting

Provides information on Kanvus Graphic Tablet, where you can find the answers to most

common questions.

Notes for This Manual A few notes and manuals are used throughout this guide, allowing you to complete certain tasks

safely and effectively.

1. WARNING Important Information that must be followed for safe operation.

2. IMPORTANT

Vital information that must be followed to prevent damage to data,

components, or persons.

3. TIP Tips for completing tasks.

4. NOTE Information for special situations.

3

Safety Information

Adhering to the following safety information will prolong the life of the Tablet.

1. DO NOT try to open the housing of the tablet and the digital pen. It will void

your warranty.

2. DO NOT expose to or use near liquids, rain, or moisture.

3. DO NOT place or drop objects on top of the Tablet.

4. DO NOT expose to strong magnetic or electrical fields.

5. DO NOT throw the Tablet in municipal waste. The product has been

designed for proper reuse and recycling of parts. The symbol of the

crossed-out wheeled bin indicates that the product should not be placed in

municipal waste. Check your local regulations for disposal of electronic

products.

C a r e a n d C l e a n i n g 1. DO NOT expose to dirty or dusty environments to avoid wearing-down the

surface of the tablet.

2. Regular cleaning of the tablet surface with a soft cloth will help expand the

life span of your tablet. DO NOT use any kind of volatile liquid on the tablet

surface, as it will damage the plastic case.

3. Store your tablet and the pen in a clean, dry place and avoid extreme

temperatures.

4

1. Product Introduction

-Package Contents

-Tablet

-Digital Pen

5

Package Contents

Check your package for the following items.

� Kanvus Life H85 Digital Tablet

� Kanvus Pen KP-201 (Including 1AAA

Alkaline Battery, 2Replacement Pen

Tipsand 1 Pen Clip)

� Life Kanvus Cover

� Installation CD

� Quick Start Guide

� Kanvus Tutorial DVD

6

Tablet

Refer to the picture below.

Descriptions

○○○○1 — USB Connector : Connect to a USB port on your PC.

○○○○2 — Working Area : Please refer to Working area section for detail descriptions.

○○○○3 — LED Indicator : The green LED light on the tablet is the main indicator for hardware

operation. This LED normally stays off, and will only be turned on/off in response to certain

conditions. Pay attention to the states of the LED when you are encountering the following

situations :

(a) A built-in power saving function would execute the power saving mode for the pen if it

is left unused for a period of time. Tap anywhere on the surface with the tip of the pen

USB Connector

Hotspot Area

Working Area

LED Indicator

Hot Key

7

to “wake it up” if it has gone into power saving mode.

(b) When the pen tablet is re-activated, the LED light will go on for a moment, and will

then turn off again.

(c) When the tablet detects the digital pen, the LED will blink slowly. This happens when

the pen tip is idling or is being placed within the working area on the tablet.

(d) When you press a button on the pen barrel, the LED light will be turned on.

(e) Moving the pen around the working area will cause the cursor on the screen to move

accordingly.

○○○○4 — Hotspot Area : The hotspot area is located at the edge of the working area. A hotspot is

used as a hot key. Press the hotspot to start a default or user-defined application or function.

○○○○5 — Hot Key : you can change the express key settings from the Express Keys Configuration

Page.

After the tablet’s device driver has been properly installed, a small

tablet icon will appear in the System Tray, which is normally at

the lower right corner of the desktop.

8

Digital Pen

Refer to the pictures below.

Descriptions

○○○○1 — Button 2 : This button functions as the Right Click of the mouse (by default).

○○○○2 — Button 1 : Functions like the scroll of the mouse, you can move up/down/left/right (by

default).

○○○○3 — Pen Tip : It is a pressure-sensitive freehand tool for image editing and creating pen strokes

similar to real handwriting. Tap the Pen tip on tablet acts as the Left Click of the mouse (by default).

Please refer to Configuration section for more detail settings.

Button 2

Button 1

Pen Tip

9

Changing the battery

Changing the Kanvus Tip

The power saving mode will be activated if the pen is left unused

for about 3 minutes. To wake the pen up, please press the pen tip

once anywhere on the surface before you start writing again.

10

2. Getting Started

-Installation

-Configuration

11

Installation

Windows

Installing the Driver Software on Windows

Please follow the installation instructions below for Microsoft Windows 2000, XP and Vista

operating systems :

1. Insert the packaged installation CD into CD-ROM drive.

2. The main installation window will appear automatically. If not, please start the installation

manually by opening 【My Computer】►【CD/DVD ROM】► then click on the 【Autorun】

program.

12

3. When installing the driver, please follow the installation instructions on screen and press the

“Enter” key for each step. After the installation is completed, please reboot the computer

(recommended).

Hardware Installation

Connect the tablet to a PC via an available USB 2.0 port, after you have installed the driver and

rebooted your PC.

Driver must be installed before you connect the device.

13

Mac OS

Installing the Driver Software on Mac OS

Please follow the steps below to install the driver :

1. Place Tablet CD into the CD-ROM drive.

2. Click “DriverSetup” on the TABLET window.

14

3. Choose “Driver Setup” when the “Setup Items” dialog box appears.

4. Click Continue

5. Click “Install” when the “OS X - PenTablet Driver” message appears.

If your Mac OS version is below Mac OS X, please browse your

CD. (Mac Driver / Mac OS 9)

15

6. Key-in your name and password (Mac computers require username and password).

7. Click Close

16

Hardware Installation

Connect the tablet to a PC via an available USB 2.0 port, after you have installed the driver and

rebooted your PC.

Driver must be installed before you connect the device.

17

Configuration

Windows

To configure your tablet, please press【Start】►【Settings】►【Control Panel】, and double-tap the

【Tablet Setting 】icon.

Or tap on the tablet icon ( ) in the System Tray (located at the lower right corner of the screen).

There are 5 tabs : Info, Button, Scope, Hot Cells, Pressure.

18

1. Info

The Info tab displays the version number of the driver and Tablet PC function.

(1) Show Icon in System Tray : Tick the box beside it if you want to show the tablet icon ( ) in

the system tray.

(2) Support Tablet PC Feature : Tick the box Support Tablet PC Feature to enable the Tablet PC

function of pressure sensitivity.

Once the Tablet driver is installed in Windows, the Tablet PC setting will support

pressure in MS Journal, OneNote (2003, 2007) etc.

Even when the Tablet PC setting is disabled, the pen pressure for most of the art

software packages (Photoshop, Illustrator, Corel Painter) will still be working, but

the pen pressure will not function in MS Journal, OneNote (2003,2007) etc.

19

2. Button

(1) Button Name

You may configure the functions of Pen Tip, Barrel Button 1 and Barrel Button 2 by clicking the

drop-down menu for Button Name. Assign a command according to the Mouse Command list.

You can select No Action, Left Click, Left Double Click, Middle Click, Middle Double Click, Right

Click, or Right Double Click.

The Mouse Command is based on the three-button mouse model.

20

(2) Double Click Time

Move the cursor towards “Slow” if you want a slower double-tapping time with the Pen Tip, or move

towards “Fast” if you want it faster. You can achieve the same setting if you go to the Double-click

Speed page displayed by selecting【Start】►【Control Panel】►【Mouse】►【Buttons】, which

allows you to adjust the speed setting.

(3) Default

Tap on the “Default” button to return to the factory default setting.

21

3.3.3.3. Hot Keys

(1) Default

Resume the Express Keys to the default settings.

(2) Re-define Express keys

Select “Common”, “Mouse”, “Multimedia”, “Other”, “Run”, “Internet” and “Hot Key” tabs to re-define

the settings.

22

(2.1) Common

(2.1.1)Express key name

Rename the Express Key.

(2.1.2)Disable

Disable the Express Key name display on the Pen Tablet control panel.

(2.1.3)Default

Resume the Express Key name to the default setting.

23

(2.2) Mouse

(2.2.1)Mouse function

Select Mouse mode settings.

24

(2.3) Multimedia

Multimedia function

Select multimedia function settings: “Play/Pause”, “Stop”, “Previous”, “Next”, “Mute”,

“Volume Up” and “Volume Down”.

25

(2.4)Other

Tablet's working area

Select “Largest Working Area” or “Screen Ratio”.

Show setting

Show Express key name.

26

(2.5) Run

(2.5.1)Run

Use the browse button to select a file and run, or type in a file name with the complete

path.

(2.5.2)Start in

This is the initial folder when the program starts the execution.

(2.5.3)Parameters

The string type will be passed to the program as parameters. For example, you may

type in a document name here and pass it to a word processing program specified in

the Run line above.

27

(2.6) Internet

Network function

Select “Previous Page”, “Next Page”, “Refresh”,” Stop”, “My Favorite”, “IE”, “E-Mail”.

(2.6.1)Link to:

Kind of Service

Select an Internet service to start. For example, browsing website, send an E-mail.The

exact program initiated (for example, the browser program) depends on system

settings.

(2.6.2)Address

The URL address for the selected service. For example, the Website or e-mail

addresses.

28

(2.7) Hot Key

The key combination to press

Select any key such as alphanumeric key or cursor control key, combined with Shift,

Ctrl and/or Alt key.

Common function

Select some common used settings.

29

4. Scope

(1) Full Area

Tap on the “Full Area” button to enable the full

working area.

(2) Screen Ratio

Set the tablet screen ratio. The screen ratio you

set will then be the screen size of your working

area.

30

(3) Reserve Edges

Tap on the “Reserve Edges” button to allocate

spaces for the tablet’s hotspots.

(4) Pen Area Dimensions

This indicates the current height and width in

the Pen Area Dimensions. Enter new values

here if you wish to change the dimensions of

the pen area.

31

(5) Pen Area Offset

This indicates the horizontal and vertical

distances from the upper left corner of the Pen

Area to the upper left corner of the maximum

Pen Area. Enter new values by typing in

numbers or clicking the up/down arrows if you

wish to adjust the offset distance.

32

5. Hotspot

(1) Hot Pad Layout

You can see the properties of the hot keys by

clicking the blue blocks at the edges of the

digital tablet.

(2) Hot Edges

There are four edges around the tablet for you

to allocate the hot keys.

(3) Define

Press the Define key to configure hotspots for

running programs, the Internet or hot keys.

(3.1) Define Hotspot – Run

Run – You may use the browse

button to select a file and run it, or

you may type in a file name with

complete the path.

Start in – This is the initial folder from

where the program starts to run.

Parameters – The string type will be

33

passed to the program as parameters. For example, you may type in a document name

here and it will be passed to a word processing program. Then it will be run as the Run

option above.

(3.2) Define Hotspot – Internet

Kind of Service – You can select

some Internet services, for example,

browsing a website, newsgroup,

sending an E-mail, or using other

Internet services. The exact program

to be initiated (for example, the

browser program) depends on the

system settings.

Address – The URL address for the selected service. For example, the Website or e-mail

addresses.

(3.3) Define Hotspot – Hot Key

Configure the key combination –

You may select any key such as

alphabet, numeric key or cursor

control key, to be combined with Shift,

Ctrl and / or ALT key.

34

(3.4) Define Hot Cell - Multimedia

Multimedia function

Select multimedia function settings:

“Play/Pause”, “Stop”, “Previous”,

“Next”, “Mute”, “Volume Up” and

“Volume Down

(3.5) Define Hot Cell - Other

Tablet's working area

Select “Largest Working Area” or

“Screen Ratio”.

Show setting

Show Express key name.

35

(4) Print

Tap on the “Print” button to print an overview of all hot spot functions.

(5) Clear

Tapping on this button will clear up the definition of the selected Hotspot, so no action will be taken

when the Hotspot is tapped later on.

(6) Load Default

Return to original default.

36

6. Pressure

(1) Pressure Test

You can click the slide bar below to adjust

pressure sensitivity and there are 4 color

choices for the pen : Black, Red, Green and

Blue. There is a Pressure Test area to see the

thickness of a line for a certain sensitivity of

the pen tip on the tablet pad. The numerical

value of the pressure level is shown in a box

above the “Clear” button.

(2) Clear

Tap on the “Clear” button to clean up the space in the Pressure Test area.

(3) Click Sensitivity

You can tap with the pen tip or left-click the mouse to move the slider in order to adjust the

sensitivity of the pen tip (it is assumed that you are in the default setting). Light allows the pen tip to

react quickly with just a slight press, while Heavy means the pen needs greater pressure applied to

it.

37

Mac OS

Go to Tablet Setting Page

1.1 Click【GO】►【Applications】

1.2 Click Pen Tablet Setting

38

1.3 Click Tablet Setting

39

There are 5 tabs : Info, Button, Scope, Hot Cells, Pressure.

1. Info

The Info tab displays the version number of the driver and Tablet Mac information.

.

40

2. Button

(1) Button Name

You may configure the commands of the pen tip and the two barrel buttons by selecting the button

name from the drop down menu and assigning a command based on a traditional three-button

mouse. You can select No Action, Left Click, Left Double Click, Right Click, or Right Double Click.

(2) Default

Tap on the “Default” button to return to the factory default settings.

41

3. Hot Keys define page

For the models with express keys, you can change the express key settings from the Hot Keys

Configuration Page.

(1) Select Hot Keys Button settings

42

(2) Select “reset Customer Defined” Hog Keys settings.

(3) Application

You may use the browse button to select a file and run, or you may type in a file name with the

complete path.

(4) Hot Key

43

Select the key combination to press – You may select any key such as alphanumeric key or cursor

control key, combined with Shift, Option and / or Command key.

(5) Internet Type:

Select “Web Side”, “Mail”.

(6) Mouse

Mouse Action: Select “Click”, “Right Click”, “Double Click”.

44

4. Scope

(1) Full Area

Tap on the “Full Area” button to

enable full working area.

(2) Screen Ratio

Set the screen ratio for the tablet

working area. The screen ratio

chosen will be the screen size for

the working area.

45

(3) Reserve Edges

Tap on the “Reserve Edges” button to

allocate spaces for the tablet’s

hotspots.

(4) Pen Area Dimensions

This indicates the current height and width of the Pen Area Dimensions. Enter new values here if

you wish to change the dimensions of the pen area.

(5) Pen Area Offset

This indicates the horizontal and vertical distances from the upper left corner of the Pen Area to the

upper left corner of the maximum Pen Area. Enter new values by typing in numbers or clicking the

up / down arrows if you wish to adjust the offset distance.

46

5. Hot Cells

(1) Hot Pad Layout

You can see the property of a hot key by clicking the blue cells surrounding the digital tablet.

(2) Hot Edges

There are four edges around the tablet where you can allocate your hot key locations.

(3) Define

Press the “Define” key to define Run, Internet or Hot Key functions.

47

(3.1) Define Hot Cells – Run

Run – You may use the browse button to select a file and run it, or you may type in a file

name with the complete path.

(3.2) Define Hot Cells – Internet

Kind of Service – You can select some Internet services, for example, browsing a website,

newsgroup, sending an E-mail, or using other Internet services. The exact program to be

initiated (for example, the browser program) depends on your system settings.

Address – The URL address for the selected service. For example, the Website or e-mail

addresses.

48

(3.3) Define Hot Cells – Hot Key

Configure the key combination – You may select any key such as alphabet, numeric key

or cursor control key to be combined.

(4) Clear

Tapping on this button will clear up the definition of the selected Hot Cell, so there is no action will

be taken when the Hot Cell is tapped later on.

49

6. Pressure

(1) Pressure Test

There are four different colors for selecting and the pressure sensitivity of the pen tablet can be

adjusted in this tab. There is a test area to see the thickness of a line by pressing a certain pressure

of pen tip on the tablet pad. The numerical value of the pressure level is shown in the field above

the “Clear” button.

(2) Clear

Tap on the “Clear” button to clean the space up in the Pressure Test area.

(3) Click Sensitivity

By default setting, tapping with the pen tip is equivalent to a left click of a mouse. Move the slider in

the sensitivity bar to adjust the response of the pen tip. Light means when presses the pen tip that

will be reacted very quickly with a slight power, but the heavy function is opposite.

50

3. Using the Tablet

-Holding the Pen

-Working Area

-Positioning

-Clicking

-Dragging

-Pressure Control

51

Holding the Pen

Hold the digital pen as you would hold a pencil. Keep the buttons of the pen close to your index

finger or thumb so that you can click the button easily.

When the pen is not in use, place it in the pen stand or lay it flat on your desk.

To maintain the sensitivity of your pen tip, do not store the pen in a

container where it will rest on its tip.

52

Working Area

Working area is the area of the tablet that can sense the movement of the digital pen. The

working area of the tablet corresponds with the screen of your PC.

The cursor in the screen area indicates pen position, and the

cursor follows the movement of the pen.

Screen Area

Working Area

53

Positioning

Use the digital pen to position the cursor on your PC screen.

The distance between the pen tip and the tablet surface must be less than 10mm so that the

tablet can sense the movement / location of the pen. The cursor location on the screen

corresponds with the location of your pen tip on the tablet.

Lift the pen tip and place the pen tip in a new location on the tablet. The cursor will jump to the

new position.

54

Clicking

One Click : Tapping the pen tip once on the tablet surface within the working area performs a

click. A “Click” is used to select something.

Double Click : A double tap with the pen tip in the working area performs a double-click.

“Double-Click” is used to open something you select.

You can also set the function of pen buttons to click or

double-click. To assign new switch functions, see “Configuration”.

55

Dragging

To drag an object, simply point to and click on the object (to highlight the object), then move the

pen tip to the location you want to drag to.

56

Pressure Control

The tablet comes with drawing applications that support pressure sensitivity, so you can change

the thickness of the line you draw with different pressure, just as if you were using a real pen or

pencil.

To draw with pressure sensitivity, first select a pressure-sensitive tool from your application’s

tool bar. Then draw along the surface of the tablet while applying various amounts of pressure

downward on the tip of the pen. Press hard for thick lines or thin lines or dense color. Press

gently for thin lines or softer color.

57

4. Using the Bundled Software

-System Requirements -Introduction to Tablet Software -Supporting Operating Systems

-Installing Tablet Software

-Uninstalling Tablet Software

58

System Requirements

Operating System Windows® XP(SP2) / VistaTM / 7

CPU Pentium III or above

Hard Disk 256 MB or Higher

RAM (Memory) 256 MB (Windows 2000 / XP), 1 GB (Windows Vista/ 7)

Equipments USB connector, CD/DVD ROM

59

Introduction to Tablet Software

K-WorkInk

Allows you to handwrite, make notes or put

annotations on Microsoft Word documents and you

can save the handwriting / notes.

K-Notice

You can take a snapshot of the pictures on the

screen and then insert your selected text and

pictures for use in presentations or e-mails.

K-Command

Allows you to write down the command symbols

directly on the digital pen tablet in order to execute

computer commands or open files.

K-Mail

You can write your own signature for your e-mails

to family and friends.

K-Signer

Insert signatures or hand drawn graphics onto the

document.

60

Supporting Operating Systems

Operating System Windows XP Windows XP

64

Windows

Vista

Windows

7

K-Notice V V V V

K-Mail V V V V

K-WorkInk V V X X

K-Command V V X X

K-Signer V V V V

K-WordInk : Suggestion! Windows Vista users are able to use the

Annotation function through MS OFFICE 2003 or 2007.

K-Command : Suggestion! Windows Vista users are able to use

the handwriting and input function built-in under the Windows

Vista system.

61

Installing Tablet Software

1. Open your computer and start the Windows.

2.

Place the CD disc into the CD/DVD ROM driver

and the installation program will be automatically

activated (See figure to the right).

Select “Tablet Software Setup”, and press the

“Enter” key to start the Tablet Software installation.

3.

The message box will come out with the software

selection. Select the software you want to install

and confirm the installation location. Then, press

“OK” to install.

4. After the installation is completed, press “OK” to

finish software installation.

To use the Tablet software, you need to install the Driver first and

then install the Tablet Software. (For more information about the

installation of driver, please refer to the included Driver Installation

Manual.)

62

When you run the installation with Windows Vista,

after you finish step 4, please wait until you see

the message box (see figure to the right) and

select “This program installed correctly”. After your

computer system has finished reading the data

from the CD/DVD ROM, take the CD out and finish

the installation.

63

Uninstalling Tablet Software

In order to uninstall the Tablet Software, move your cursor to the lower left corner of the screen

【Start】►【Programs】►【Tablet Software】►【Uninstall】.

64

5. Specification Summary

-Tablet

-Digital Pen

65

Tablet

Active area 8.0"x5.0"

Dimension (L X W X H) 240 x 341 x 9.6 mm

Weight 755g

Interface USB 2.0

Resolution 4000 LPI

Report rate 200 RPS

Pressure sensitivity 1024 Level

Reading height 10 mm (From up case)

Hot Key 8 Buttons

Hotspot 13 Hotspots

Power consumption 0.35 W

USB cable length 1.5 m

Windows® OS Windows® XP / Vista / 7

Macintosh© OS MAC OS 10.4.11, 10.5.6, 10.6

66

Digital Pen

Dimension 137.7 X 12 / 16.4 mm

Weight 9 g (Except battery)

Power supply One 1.5V AAA alkaline battery

Power consumption 180 uW

Buttons 3 keys

Power saving Mode Yes

Time to stand by 5 ~ 30 min.

Durability batteries 5000 hr.

67

6. Troubleshooting

-Testing your device

-FAQ

-Service and Technical Support

-Driver Download

68

Testing your device

Please do the following tests first to identify your problem.

1. Check the connection :

After you connect the device to your computer, you should see a tablet icon in the system tray. If

you do not see the icon, please follow these steps :

(1) Make sure the USB cable is properly connected to a USB port.

(2) Try connecting to another USB port.

(3) If the device is connected to a USB Hub, please make sure the USB Hub is properly

connected to a USB port.

(4) Check if your USB controller is activated or not.

2. Diagnose the device :

If the pen or the tablet still do not work properly, please follow these steps to help diagnose the

problem with the device.

(1) Pull off the tablet's USB plug from the computer.

(2) Remove the Tablet driver from the system.

(3) Re-connect the Tablet's USB to the computer.

(a) Check whether the tablet's LED is blinking or not. If the LED is not on, that means

there is an error with your tablet.

(b) Test your wireless digital pen on the tablet working area. If it can work as a mouse, it

69

means the hardware is OK. If it does not work, try replacing the battery.

(c) After changing the pen’s battery, if it is still not working, this means there is an error

with the hardware.

(4) Download the latest version of the driver directly from our official website. You can also

check the latest FAQ on our web site for other information.

(5) After installing the new version of the driver, the system will require you to restart your

computer.

(6) After restarting your computer, you can find the tablet icon ( )at the bottom right of the

screen.

(a) If you cannot find the tablet icon ( ) at the bottom right of the screen, it means the

driver failed during startup. This might be caused by an incompatibility issue.

(b) Check from 【My Computer】►【Properties】►【Hardware】►【Device Manager】,

if there is an exclamation mark, it means the installed tablet driver is incompatible

with the windows system. If you have this problem, please contact us immediately for

help.

(7) By clicking the tablet icon ( ) at the bottom right of the screen, you can test the pressure

sensitivity to see whether the pen pressure function works or not. (Refer to Configuration.)

If you do not have the pen pressure, it means the pen itself might

be faulty.

70

FAQ

Question : Why is the LED of the tablet blinking continuously ?

Answer : It means that the USB port on your PC has a bad connection or the power supply is not

stable. Please re-plug in your USB again. If the problem persists, try changing to another USB port.

Question : How can I get the updated software ?

Answer : You can download the new driver from our website.

1. Uninstall your old driver : Click【Start】►【Programs】►【Kanvus Tablet】►【Uninstall】

2. Download the latest version of the driver in the download section and save it onto your hard

drive.

3. Unzip the file in a folder on your hard drive (with Windows built-in unzip utility or a program like

Winzip for instance).

4. Double-click the Setup.exe in the folder where you unzipped the file.

Question : How to install a new Pad-Cover ?

Answer : Please follow the steps below.

1. Remove the device from USB port.

2. Remove the current Pad-Cover. (need some force)

3. Clean the surface with a wet cloth to keep it clean and smooth.

4. Tear off the protective film on the double-sided tape of the new Pad-Cover.

5. Put the new Pad-Cover on the tablet

71

Question : Why can‘t I select K-WordInk or K-Command to install during installation ?

Answer : Because both K-WordInk and K-Command are for Windows 2000 or XP version only. For

Windows Vista user, Windows Vista has built-in Annotation function through Office 2003 / 2007

which is similar to K-WordInk, and also the built-in Pen flicks function that can perform common

actions as K-Command.

We suggest users to use the built-in applications under the Windows Vista system for more

ensured compatibility.

72

Service and Technical Support

If your tablet does not work properly, please check the Troubleshooting procedure and FAQ first.

You can go to our web site to download the latest driver/software and check the updated FAQ. If

your problem still remains unsolved, please contact our service and technical support staff.

KGuard Computer Co., Ltd.

Tel : +886 2 8228 6066

3F, No. 113, Jian 2nd Road Jhonghe City, Taipei County 235, Taiwan (R.O.C.)

http://www.kanvus-global.com/

Driver Download

You can download the latest driver and e-documents from the following web sites.

http://www.kanvus-global.com/

73

A p p e n d i x

-Declarations and Safety Statements

-Ordering Components and Accessories

-Copyright Information

-Limitation of Liability

74

Declarations and Safety Statements

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

according to Part 15 of FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

You can determine whether the equipment is causing interference by disconnecting it from your

computer. If the interference stops, it was probably caused by the equipment.

If the equipment does cause interference to radio or television, you may be able to correct the

interference by using one or more of the following measures :

1 Rotate the television or radio antenna until the interference stops.

2 Move the equipment farther away form the television or radio.

3 Plug the equipment and computer into an outlet that is on a different circuit form the television

or radio.

If necessary, consult with your dealer or an experienced radio/television technician for help.

CE

The Kanvus tablet has been tested and found to comply with the following harmonized European

Norms :

1 EN55024 (electromagnetic immunity)

2 EN55022 (electromagnetic emissions)

75

Ordering Components and Accessories

To purchase parts and accessories, please contact your local dealer or distributor.

76

Copyright Information No part of this manual, including the products and software contained in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or

by any means, without the legal, written permission of KGuard Computer Co.LTD.

Kanvus PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITION OF MERCHANTABILITY FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL

KANVUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY direct

or indirect, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS

OF PROFIT, LOSS OF BUSINESS, LOSS OF DATA, INTERRUPTION OF BUSINESS AND THE

LIKE), EVEN IF KANVUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

Products and corporate names appearing in this manual may or may not be registered trademarks

or copyrights of their respective companies and are used only for identification or explanation and

to the owners’ benefit, without intent to infringe.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE PROVIDED FOR

INFORMATION ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE, AND SHOULD

NOT BE CONSTRUED AS A COMMITMENT BY KANVUS. KANVUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR

IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Copyright© 2009 KGuard Computer Co. Ltd. All Rights Reserved.

77

Limitation of Liability Circumstances may arise where because of a default on Kanvus part or other liability, you are

entitled to recover damages from Kanvus. In each such instance, regardless of the basis on which

you are entitled to claim damages from Kanvus , Kanvus is liable for no more than damages for

bodily injury (including death), damage to real property and tangible personal property; or any other

actual and direct damages resulted from omission or failure in performing legal duties under this

warranty statement, up to the listed contract price of each product.

Kanvus will only be responsible for or indemnify you for loss, damages or claims based on contract,

tort or infringement under this Warranty Statement.

This limit also applies to Kanvus suppliers and its distributors. It is the maximum for which Kanvus,

its suppliers, and its distributors are collectively responsible.

UNDER NO CIRCUMSTANCES IS KANVUS LIABLE FOR ANY OF THE FOLLOWING :

(1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES;

(2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR

(3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES, OR FOR ANY ECONOMIC

CONSEQUENTIAL DAMAGES (INCLUDING LOSS OF PROFITS OR SAVINGS), EVEN IF

KANVUS, ITS SUPPLIERS OR DISTRIBUTORS ARE INFORMED OF THEIR POSSIBILITY.