access point cd-rom (containing manual and warranty) ethernet … 2… ·  · 2013-02-24access...

12
1 This product can be set up using This product can be set up using This product can be set up using This product can be set up using This product can be set up using an an an an any curr y curr y curr y curr y curren en en en ent web br t web br t web br t web br t web browser owser owser owser owser, i.e , i.e , i.e , i.e , i.e., ., ., ., ., Internet Explorer 6 or Netscape Internet Explorer 6 or Netscape Internet Explorer 6 or Netscape Internet Explorer 6 or Netscape Internet Explorer 6 or Netscape Navigator 6.2.3. Navigator 6.2.3. Navigator 6.2.3. Navigator 6.2.3. Navigator 6.2.3. DWL-2100AP D-Link D-Link D-Link D-Link D-Link Air Air Air Air AirPlus Plus Plus Plus Plus XtremeG XtremeG XtremeG XtremeG XtremeG TM TM TM TM TM 802.11g/108Mbps 802.11g/108Mbps 802.11g/108Mbps 802.11g/108Mbps 802.11g/108Mbps Wir Wir Wir Wir Wireless A eless A eless A eless A eless Access P ccess P ccess P ccess P ccess Poin oin oin oin oint 5V 2.0A DC Power Adapter ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-2100AP. 11122003 Before You Begin Check Your Package Contents DWL-2100AP 802.11g/108Mbps Wireless Access Point CD-ROM (containing Manual and Warranty) Ethernet (CAT5 UTP) Cable If any of the above items are missing, please contact your reseller. It’s best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-2100AP. The default IP address for the DWL-2100AP is 192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-2100AP’s IP address for the purpose of configuring the DWL-2100AP. See the Appendix if you need assistance in assigning a Static IP address for your network adapter. Using a power supply with a different voltage rating will damage and void the warranty of this product.

Upload: doantruc

Post on 20-Mar-2018

222 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

1

This product can be set up usingThis product can be set up usingThis product can be set up usingThis product can be set up usingThis product can be set up usingananananany curry curry curry curry currenenenenent web brt web brt web brt web brt web browserowserowserowserowser, i.e, i.e, i.e, i.e, i.e.,.,.,.,.,Internet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeInternet Explorer 6 or NetscapeNavigator 6.2.3.Navigator 6.2.3.Navigator 6.2.3.Navigator 6.2.3.Navigator 6.2.3.

DWL-2100APD-LinkD-LinkD-LinkD-LinkD-Link AirAirAirAirAirPlusPlusPlusPlusPlus XtremeGXtremeGXtremeGXtremeGXtremeGTMTMTMTMTM

802.11g/108Mbps802.11g/108Mbps802.11g/108Mbps802.11g/108Mbps802.11g/108MbpsWirWirWirWirWireless Aeless Aeless Aeless Aeless Access Pccess Pccess Pccess Pccess Poinoinoinoinointtttt

5V 2.0A DC Power Adapter

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software andspecifications subject to change without notice. DWL-2100AP. 11122003

Before You Begin

Check Your Package Contents

DWL-2100AP 802.11g/108Mbps WirelessAccess Point

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP) Cable

If any of the above items are missing, please contact your reseller.

It’s best to use a computer (with an Ethernet adapter) that is connected to a switch forconfiguring the DWL-2100AP. The default IP address for the DWL-2100AP is192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign yourcomputer a Static IP address within the same range as the DWL-2100AP’s IP addressfor the purpose of configuring the DWL-2100AP. See the Appendix if you needassistance in assigning a Static IP address for your network adapter.

Using a power supply with a different voltagerating will damage and voidthe warranty of this product.

Page 2: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

������������ ���������

�������������������������������� ���������� ���������������������������������������������

�������� �������������������������������������������������������������������������������������������������������������������������������������������������������� ��� �!����������"���������������������������������������

������#� �����������������������������������������������������������������������������������������������������������������������������������������$ � ���������#�%�&'����� �����$ � ���������((�)*' ����+�,����� ����-��������������������������������������������.����������/������������������� ����������������� ��!��������"�������������/������������������������"����������������� �$���+�!���"������������������������������� ������0�#10�#2 �0�����.�������� ���� ������������������� �-���"��������������������������������"������������������������������ '

�������!�������3%)������� �2���/��3������ �4����� ���������������������3)�������� �2���/��3������ ��4#�����������������������������������5������������������������ �������������������� � ���� �4�/����� �����6�� �������� �������� ������� ���������������������������

�������������� ���������������������������������������

������������7 ���������� �.�����������6�� ���1��������

�������������� ���� ���������� ����

�������� ���������� ������������.��������� ����

Page 3: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

3

Using the Setup Wizard

Open your Webbrowser and type“http://192.168.0.50”into the URL addressbox. Then press theEnter or Return key.

The logon pop-upscreen will appear.

Type “admin” for theusername and leave thepassword field blank.

Click OK

When you have com-pleted the steps in thisQuick Installation Guide,your connected networkshould look similar tothis:

Page 4: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

4

Once you havelogged in, the Homescreen will appear.

You will see thefollowing screens.

Click Run Wizard

Click Next

Using The Setup Wizard (continued)

Page 5: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

5

Click Next

Step 1 - Set up your newpassword. You have theoption to establish a password.

Step 2 - Wireless SetupThe default wirelesssettings are:SSID = defaultChannel = 6You can change thesesettings to match anexisting wireless network.

Click Next

Using The Setup Wizard (continued)

Page 6: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

6

Step 3 - EncryptionThe DWL-2100AP is capable oftwo levels of wireless encryption64-bit and 128-bit. By defaultthe encryption is disabled.You can change the encryptionsettings for more securewireless communication.

Your Setup is Complete!

Using The Setup Wizard (continued)

Click Next

Click Restart

Page 7: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

7

Click Close

You will be returned to the Home tab.

Click to Exit

For additional settings or information, refer to the Advanced, Tools, or Statustabs on the web-management interface; or to the manual located on the CD-ROM.

Page 8: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

8

AppendixTo assign a Static IP Address to the laptop or computer that you are using to configurethe DWL-2100AP, please do the following:

Assigning a Static IP Address in Windows

Go to Start > Double- click on ControlPanel > Double-click on NetworkConnections > Right-click on LocalArea Connections > Click Properties

Highlight Internet Protocol (TCP/IP)

Click Properties

Select Use the following IP address inthe Internet Protocol (TCP/IP) Propertieswindow

Click OK

Input your IP address and subnet mask.(The IP Address must be within the samerange as the DWL-2100AP. The IP Addressof the DWL-2100AP is 192.168.0.50. Youcan assign 192.168.0.51 for your computer.No two computers can have the same IPAddress. Assign a subnet mask of255.255.255.0.)

Page 9: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

9

For Windows 2000 users:For Windows 2000 users:For Windows 2000 users:For Windows 2000 users:For Windows 2000 users:Go to Start > Settings > Network andDial-up Connections > Double-click on theLocal Area Connection associated withthe Network Adapter installed on yoursystem> select Properties

Click Properties

Click Internet Protocol (TCP/IP)

Select Use the following IP address

Input your IP address and subnet mask.(The IP Address must be within the samerange as the DWL-2100AP. The IP Addressof the DWL-2100AP is 192.168.0.50. Youcan assign 192.168.0.52 for your computer.No two computers can have the same IPAddress. Assign a subnet mask of255.255.255.0.)

Click OK

Page 10: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

10

Click Internet Protocol (TCP/IP)Go to Start > Settings > Control Panel >Double-click on the Local Area Connectionassociated with the Network Adapter installedon your system > select Properties

For Windows Me and 98se users:For Windows Me and 98se users:For Windows Me and 98se users:For Windows Me and 98se users:For Windows Me and 98se users:

Click Properties

Click Internet Protocol (TCP/IP)

Select Specify IP Address

Input your IP address and subnet mask.(The IP Address must be within the samerange as the DWL-2100AP. The IP Addressof the DWL-2100AP is 192.168.0.50. Youcan assign 192.168.0.52 for your computer.No two computers can have the same IPAddress. Assign a subnet mask of255.255.255.0.)

Click OK

Page 11: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

11

For Apple Macintosh OS X:

Go to the Apple Menu Click on Networkand Select System Preferences

Select Built inEthernet in the Showpull-down menu

Click onApply Now

Select Manually in theConfiguration pull-downmenu

Input your IP address andsubnet mask. (The IP Addressmust be within the same range asthe DWL-2100AP. The IP Addressof the DWL-2100AP is192.168.0.50. You can assign192.168.0.51 for your Macintosh.No two computers can have thesame IP Address. Assign asubnet mask of 255.255.255.0.)

Page 12: Access Point CD-ROM (containing Manual and Warranty) Ethernet … 2… ·  · 2013-02-24Access Point CD-ROM (containing Manual and Warranty) Ethernet ... can assign 192.168.0.51

12

TTTTTechniechniechniechniechnical Supportcal Supportcal Supportcal Supportcal SupportYou can find software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link technical support through ourwebsite, or by phone.

Tech Support for customers within the United States:D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a week.

D-Link Technical Support over the Internet:http://support.dlink.comemail:[email protected]

Tech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 8:30am to 9:00pm EST

D-Link Technical Support over the Internet:http://support.dlink.caemail:[email protected]