accessible showering solutions - easa group

®ACCESSIBLE SHOWERING SOLUTIONS

Wet Room Easa Dek

Easa Technical Collection

Wet Room Easa DekA Resilient, easy to install floor former or base concept and a Universal Design alternative to building waterproof wet floors with the added benefit of cut to size.

• Only 22mm thick.

• Our unique patented floor former is lightweight for a single installer and focuses on strength and multi-functionality (patent GB2469662A).

• Suitable for vinyl or tiled flooring.

• Can be installed in a corner or an alcove.

• Tiling Upstands can be supplied to provide enhanced waterproofing protection.

• Non-handed.

• Can be cut if required (cut edges must be fitted against the walls).

• Available in 7 different sizes.

• Weight capacity 380 kg / 60 stone (Bariatric).

• Offset waste location to help avoid joists.

• Wastes for vinyl or tiles are provided to suit the required floor type.

• Easa recommends fitting waterproof tanking kits for installations with tiles.

• 100% recyclable.

All Easa Deks can be cut in length and width. Please ensure all cut edges are fitted against the walls.

Can be cut within 150mm of waste centre point.

85%

150mm

85%

150mm

We recommend not to cut more than 85% as the next smaller standard size would then be a better choice.Example: Cutting 85% of the Dek1050 would be 892.5 which is slightly less than our standard Dek900.

RECYCLABLEPRODUCTS

SLIP RESISTANT

DESIGNED & MADE IN THE EU

Designed and Made in the UK

380kg 60stone

477mm

267m

m31

7mm

267m

m24

2mm

392m

m

392mm

317mm

Wood

Screed

DEK900900

DEK105000

DEK122122

DEK130080

DEK140090

DEK150080

DEK170075

DEK 900 x 900

DEK 1050 x 1050

DEK 1220 x 1220

DEK 1300 x 800

DEK 1400 x 900

DEK 1500 x 800

DEK 1700 x 750

900 x 900

1050 x 1050

1220 x 1220

1300 x 800

1400 x 900

1500 x 800

1700 x 750

850 x 850

1000 x 1000

1170 x 1170

1250 x 750

1350 x 850

1450 x 750

1650 x 700

317

392

477

517

567

617

717

317

392

477

267

317

267

242

765

895

1035

1105

1190

1275

1445

765

895

1035

680

765

680

640

PRODUCT CODE DESCRIPTION (mm) SIZE (mm) SHOWER AREA (mm)

WASTE TO LONGSIDE (mm)

WASTE TO SHORTSIDE (mm)

MINIMUM CUT TOSIZE LENGTH (mm)

MINIMUM CUT TOSIZE WIDTH (mm)

All Easa Dek floor formers can be supplied with discrete tiling upstands. If Easa Dek floor former is installed in an alcove, please request an additional tiling upstand to complete the installation. Easa Dek floor formers can be cut. Cut edge(s) must be fitted against the wall(s).

TRAY RAMPED EDGE SUITABLE FORFLOOR TYPES

HANDED ALCOVE WEIGHT CAPACITY CUT TO SIZE

Barrier Free (0mm)

Easa Dek

No Yes 380 kg

60 stone

Yes - see table above

Easa Dek Characteristics

DEK900 x 900

DEK1050 x 1050

DEK1220 x 1220

DEK1300 x 800

DEK1400 x 900

DEK1500 x 800

DEK1700 x 750

317m

m

900mm

900mm

1050mm

1050mm

477m

m

1220mm

1220mm

517mm

1300mm

800mm

900mm

800mm

750mm

1400mm

1500mm

1700mm

567mm

617mm

717mm

® Depending on the size, the Floor Former may be heavy, please be careful whilst handling. Protect shower base from damage by using the cardboard packaging. Please note that the floor former must not be fitted without a floor covering applied on top, e.g. sheet vinyl flooring, tiles, etc.

All of the Easa Dek range of Floor Formers can be cut to size using a conventional hacksaw or stone blade grinder. However it is important that any cut edges are placed to the wall. It is not possible to place any cut edges to the outside edges where the floor former meets the floor.

Easa Dek Fitting Instructions for Solid Floors

1. Place Floor Former in position and mark out the size on the floor.

2. Break out screed or concrete to a minimum depth of 25mm. Check that the Floor Former fits into the opening.

3. Decide on direction of waste and breakout wall if required. For the waste it is necessary to break out 150mm diameter to a depth of 150mm. Repair any damage to damp proof course membrane. Install the waste piping (minimum fall 1 in 40). It should line up with the centre of the waste opening in the Floor Former. Please read the separate waste instructions.

4. Add support under the Floor Former by laying aweak concrete mix in excavated area.

Floor Former can be cut to size using a conventional hacksaw or stone blade grinder. Cut edges MUST be placed against a wall.

Easa UK & Ireland - Tel: +44 (0) 28 9261 2500 • Fax: +44 (0) 28 9261 2326 • Email: [email protected] • Website: www.easagroup.co.uk

®Easa Dek Fitting Instructions for Solid Floors

8. The seam between floor and Floor Former must be completely level. Fill any gaps with polyester filler paste. For tile floor installations you will need to apply the Easa tanking system as per kit instructions.

7. When the waste is seated in position, use a 3.5mm drill bit to bore through the 4 location holes of the waste flange into the floor former. Be careful not to go too deep as the waste pipe is underneath. Fit self tapping screws provided to secure the waste into place.

6. Ensure Floor Former is level on all sides.

Please Note: Apply sheet flooring or tiles as required using appropriate adhesive. The correct waste must be used depending on flooring type – see separate waste instructions for fitting waste to appropriate flooring type.


5. Place the Floor Former gently into position – do not drop as this could cause damage.

To ensure a waterproof seal a tiling upstand may be added to the edges of the floor former that will be placed against the walls. Optional rigid aluminium or flexible EPDM upstands are available.

® Depending on the size, the Floor Former may be heavy, please be careful whilst handling. Protect shower base from damage by using the cardboard packaging. Please note that the floor former must not be fitted without a floor covering applied on top, e.g. sheet vinyl flooring, tiles, etc.

All of the Easa Dek range of Floor Formers can be cut to size using a conventional hacksaw or stone blade grinder. However it is important that any cut edges are placed to the wall. It is not possible to place any cut edges to the outside edges where the floor former meets the floor.

Floor Former can be cut to size using a conventional hacksaw or stone blade grinder. Cut edges MUST be placed against a wall.

EASA DEK | Fitting Instructions for Wooden Floors

1. Place Floor Former in position and mark out the size on the floor.

2. Cut out floor sheeting or floor boards and check that the floor former fits into the opening.

3. Floor Former should be rotated so that the waste does not interfere with joists.

4. Decide on direction of waste outlet pipe and breakout wall as required – install the waste piping (minimum fall 1 in 40), it should line up with the centre of the waste opening in the Floor Former. Please read the separate waste instructions.

5. Standard Method - At each end of the Floor Former add purlins between the joists, then add additional purlins at 400mm intervals.

CROSS SECTION VIEW

6. Joists and purlins must be level on all sides.


®EASA DEK | Fitting Instructions for Wooden Floors


7. Heavy duty method - At each end of Floor Former add purlins between joists. Then add battens to the sides of the joists and form a platform with 18mm plywood level with the top of the joists.

8. Joists and plywood must be level on all sides.

9. Place the Floor Former gently into position – do not drop as this could cause damage. Polyurethane expanding foam or silicone can be added underneath the floor former as necessary.

10. Ensure the Floor Former is level on all sides. 11. When placing the Floor Former into position ensure the waste fits neatly onto the shower outlet pipe. When the waste is seated in position, use a 3.5mm drill bit to bore through the 4 location holes of the waste flange into the floor former. Be careful not to go too deep as the waste pipe is underneath. Fit self tapping screws provided to secure the waste into place. Do not over-tighten the screws.

12. Mark position of the joists and drill all four sides of the Floor Former into the joists and purlins. The holes must be countersunk to accommodate the screw heads (4.2mm x 60mm recommended screw size).

13. The seam between floor and Floor Former must be completely level. Fill any gaps with polyester filler paste. If required apply tanking system as per manufacturers instructions.

CROSS SECTION VIEW

FILLER

Please Note: Apply sheet flooring or tiles as required using appropriate adhesive. The correct waste (or adaptor) must be used depending on flooring type – see separate waste instructions for fitting waste to appropriate flooring type.

To ensure a waterproof seal a tiling upstand may be added to the edges of the floor former that will be placed against the walls. Optional rigid aluminium or flexible EPDM upstands are available.

Wastes and Traps Wet Room Easa Dek Wastes

Plastic Tiling Waste, available in standard, lowprofile or pump versions.

Tiled FloorStainless Steel Vinyl Waste, available in standard, low profile or pump versions.

Vinyl FloorPlastic Vinyl Waste, available in standard, lowprofile or pump versions.

Vinyl Floor Tiled FloorStainless Steel Tiling Waste, available in standard, low profile or pump versions.

½

½

Wet Room Waste Plastic VinylMax. flow rate 24 litres per minute.(19mm water seal trap)

½

½

Wet Room Waste S/Steel Vinyl & All Tiled FloorMax. flow rate 24 litres per minute.(19mm water seal trap)

Wet Room Low Profile WasteMax. flow rate 46 litres per minute.(50mm water seal trap)

Wet Room Pump WasteMax. flow rate determined by pump.(Untrapped)

½

½½

½

Two Piece

EASA DEKProduct Code

DEKVW1R

DEKVS1R

DEKWT1R

DEKST1R

DEKLPWV

DEKLPVS

DEKLPWT

DEKLPST

DEKPWWV

DEKPWVS

DEKPWWT

DEKPWST

Description

Vinyl – White Plastic Standard Waste

Vinyl – Stainless Steel Standard Waste

Tiling – White Plastic Standard Waste

Tiling – Stainless Steel Standard Waste

Vinyl –White Plastic Low Profile Waste

Vinyl –Stainless Steel Low Profile Waste

Tiling –White Plastic Low Profile Waste

Tiling –Stainless Steel Low Profile Waste

Vinyl – White Plastic Pump Waste

Vinyl – Stainless Steel Pump Waste

Tiling – White Plastic Pump Waste

Tiling – Stainless Steel Pump Waste

Size (visible)

140mm diam.

140mm diam.

150x150mm

150x150mm

140mm diam.

140mm diam.

150x150mm

150x150mm

140mm diam.

140mm diam.

150x150mm

150x150mm

Dek Wastes are necessary in order to complete a Wet Room Easa Dek installation. Please order the waste that meets your floor requirements.

Easa Dek Technical Highlights

WET ROOM EASA DEK

Wet Floor Former is installed below thefl oor covering (vinyl or tiles).Waste below fl oor.

All our Wet Room Easa Dek fl oor formers will withstand 380 kg / 60 Stone when installed as per our instructions.

The Wet Room Easa Dek is fully recyclable. When you buy environmentally friendly products such as our fully recyclable shower trays, fl oor formers and doors, you help reduce waste by creating a market for our recycled materials. You also help create jobs in businesses that handle and use recycled materials. Purchasing green products is like making a vote. Requesting more sustainable products in the market place tells manufacturers that consumers care about the way products are made.RECYCLABLE

PRODUCTS

WET ROOM EASA DEK

The Easa Dek system rests beneath the chosen fl oor covering (tiles or vinyl), the unique design focuses on strength, multi-functionality and speed of installation. Ensure silicone sealant is applied between the top edge of tiling lip and wall to provide a watertight seal and effectively fi ll any gaps between fl oor and leading edges. The fl oor former will be covered with the chosen fl oor covering to create a complete barrier free access.

WET ROOMS

A waterproof tanking system is essential to ensure a waterproof installation of the Easa Dek.

Installation Overview

Tiled Floor

Barrier Free (0mm)

Information and cleaning instructions for yourWet Room Easa Dek

Please read the following information carefully

Product description of Easa Deks

The Easa Dek floor former is manufactured from Glass Reinforced Plastic (GRP) and can withstand up to 380 kg. All Easa Deks can be fitted on both screed and wooden floors and full fitting instructions are supplied containing instructions of the Easa Dek. You are advised to keep these instructions for your information. The dimensions of the shower system will be detailed on the warranty card.

Safety first

• For your safety, it is advisable to be seated in the showering area before turning the water on.

• Ensure shower doors and curtains are closed.

• For clients who are mobile, it is advisable to use grab rails to assist with transfers in and out of the showering area.

• Clients using wheeled shower access may require assistance for positioning and transferring in and out of the showering area.

• Always apply any shower chair brakes during showering.

• After showering, allow the excess water to drain away before standing or transferring out of the shower area. Care should be taken when transferring in and around the shower area as wet surfaces greatly increase the risk of slipping. The waste supplied can have the internal section removed for easy cleaning, and allows water to drain effectively from a showerhead that delivers a maximum of 24 litres per minute (low profile wet-room wastes 46 litres per minute).

Wet Room Easa Dek floor formers

Our Easa Dek floor former will be covered with anti-slip floor covering and it is important to follow the manufacturers cleaning instruction for that specific floor covering. This may be available from the installer.

Cleaning instructions / maintenance

DO NOT USE:

Abrasive CleanersHair ColorantsBleach

Do not pour any chemical drain cleaner down the waste

Waste maintenance

Remove the top grid by lifting it straight up and then the internal tube by turning it anti-clockwise. Remove any hair and debris, flush through with clean water and replace back in position.

WARNING

Concentrated cleaning liquids, shampoos, conditioners, soaps etc that are left on the Easa Dek greatly increases the risk of slipping.

If a family member, care worker, home help or privately employed cleaner is responsible for the cleaning of the Easa Dek please encourage them to read these instructions.

Warranty*

All our Easa Deks are manufactured to the highest standard and have a lifetime warranty. If the unit fails, contact us, quote the serial number that appears on the warranty card and follow the advice detailed in ‘Customer Complaints Procedure’. We will either repair or replace the unit within 14 working days if found to be defective.

Please note

Claims will not be met under guarantee if the product has been abused in any way by neglect, improper use or failure to maintain in accordance with Easa’s recommendations, or if the system has been damaged in any accident. The company, when assessing a warranty claim, will also consider abnormal wear and tear.

* Please see our Terms and Conditions for full details.

Our Quality, Safety & Design Assurance

RECYCLABLEPRODUCTS

Recyclability Easa Deks are fully recyclable. When you buy environmentally friendly products such as our fully recyclable shower trays and floor formers, you help reduce waste by creating a market for our recycled materials. You also help create jobs in businesses that handle and use recycled materials. Purchasing green products is like making a vote. Requesting more sustainable products in the market place tells manufacturers that consumers care about the way products are made.

Easa products have been extensively tested and comply with the following British & European Standards:

BS EN 14527:2006 (E) Shower TraysBS EN 14428:2004 (E) Shower Enclosures/DoorsEU Construction Product Directive (89/106/EC)BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glassBS EN 274-1:2002 Waste fittings

CE European Union Certificates of Conformity

Easa offers a Lifetime Warranty against manufacturing and material defects, excluding normal wear and tear in general domestic applications. Accessories have a 2 year warranty.

* Please see our Terms and Conditions for full details.

Easa Warranties*

3D Design and Survey Service

Upon request an experienced Easa sales representative can discuss your needs and requirements, and draw a 3D design layout of the bathroom, and provide product technical advice.

EASA

W A R RANTY

2YEARWARRANTY

ON ALL ACCES

SO

RIE

S

TCEDENUK0112

Products in the Evolution Range:

The Evolution CollectionShower Doors

An exclusive range of functional and safe systems designed specifi cally for all family members regardless of age or ability

The Evolution CollectionGrab rails

Enhancing functionality and Safety

BS EN 14527:2006 (E) Shower TraysBS EN 14428:2004 (E) Shower Enclosures/DoorsEU Construction Product Directive (89/106/EC) BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classifi cation for fl at glass.BS EN 274-1:2002 Waste fi ttings

© Copyright 2012 Easa. All rights reserved.

Easa N.Ireland (Head Offi ce)Moira Ind Est34 Old Kilmore RoadMoira, Co. ArmaghN.Ireland BT67 0LZ

Easa GB (Sub Offi ce)Expressway WorksEastvale Place Yorkhill, GlasgowScotland G3 8QG

Tel: +44 (0) 141 334 2782

Fax: +44 (0) 28 9261 2326Fax from ROI: 048 9261 2326Email: [email protected]: www.easagroup.com

Tel: +44 (0) 28 9261 2500Tel from ROI: 048 9261 2500

RECYCLABLEPRODUCTS

Office of Fair Trading

Approved code

Designed and Made in the UK

accessible showering solutions - easa group

Documents