ace light source - alan wood’s web site · extension cord 115 volt ace® remote light source with...
TRANSCRIPT
LLiigghhtt SSoouurrccee wwiitthhoouutt MMoodduullaammpp® UUnniitt
ACE® Light Source with EKE lamp, A20500
ACE® Light Source Models
LLiigghhtt SSoouurrcceess wwiitthh IIrriiss DDiiaapphhrraaggmm
SSttaannddaarrdd LLiigghhtt SSoouurrcceess
EKE, DDL, and EJA lamps and Modulamp® unitscan be purchased separately.
115 Volt 230 Volt Description
A20500 A20510 EKE Lamp
A20500.1 A20510.1 EJA Lamp
A20500.2 A20510.2 DDL Lamp
A20520 A20530 EKE Lamp
A20520.1 A20530.1 EJA Lamp
A20520.2 A20530.2 DDL Lamp
A20500.115 A20510.230 No LampPower Supply Only
ACE® Light SourceCompact, rugged, AC halogen light source with solid state dimmer for variable
light intensity and maximizing lamp life.
Standard Featuresn Solid state dimmer for continuous control zero to full intensity.n Heavy duty, grounded metal housing.n 115 or 230 input voltage versions available.n IR interference filter for cool illumination.n Full illumination on .60" active diameter input.n Interchangeable Modulamp® Units offer 2 positions to maximize individual
lamp efficiencies. n Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense,
uniform illumination.n Built-in thermal shut down.n Quiet rear exhaust.n CSA approved to UL spec, CE compliant to low voltage and EMC directives.n Stackable with retractable handle.n Low housing temp - slightly above ambient.n Detachable IEC cord.n 3-year warranty (excludes lamp and socket).n Manufactured in the USA.
AA2200550000
Optionsn Rear baffle.n Dimmer lock.n Shutter module.n Private labeling available.n Infinite setting, thirteen blade iris
diaphragm version available to reduce
intensity while maintaining color
temperature.n ACE® Remote light source is also
available. See section 01.01.05 in
product catalog.
01.01.01 REV G
CCoolldd VViiss iioonn SSeerr iieess
Power Consumption 190 Watts (nominal)
Output Voltage 0 - 21 VAC
Fiber Receptacle .720 (13.3 mm)
Input Voltage 115 VAC / 60 Hz
230 VAC / 50/60 Hz
Temperature Range: Operating 0° to 50°C
Power Supply Specifications
Modulamp® Unit with Iris Diaphragm
Product improvements may result in specificationor feature changes without notice.
Fiber OpticsSCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics
G20500.ai
Modulamp®... SCHOTT Innovation!Two positions optimize light intensityoutput, depending on the lamp in use.Entire housing is interchangeable forquick setup.
Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL)offer light intensity and color temper-ature options to maximize productivity and accuracy.
Solid State Dimmer..SCHOTT Control! Continuous intensity control for lamp life management.
Input: 115 VAC/60 Hz, 230 VAC/50/60 Hz, Output: 0–21 VAC
ACE® Light SourceDimensions in ( ) are in mm
Extension Cord
115 Volt ACE® Remote Light Source with EKE lamp,A20560
ACE® Remote Light Sources
ACE® Remote Light Sources with Iris
EKE, DDL, and EJA lamps and Modulamp® units canbe purchased separately.
115 Volt 230 Volt Description
A20560 A20570 EKE Lamp
A20560.1 A20570.1 EJA Lamp
A20560.2 A20570.2 DDL Lamp
A20580 A20590 EKE Lamp and Iris
A20580.1 A20590.1 EJA Lamp and Iris
A20580.2 A20590.2 DDL Lamp and Iris
A20560.115 115 V Power Supply Only
A20570.230 230 V Power Supply Only
A29505 10' extension - CE and CSA Comp.
ACE® Remote Light SourceAll the features of our universally accepted ACE® light source with the added
convenience of the following:
Remote Features n 6' shielded black cable provides remote intensity control, including
ON/OFF. n Positive locking, quick disconnect cable will not pull out.n CSA approved to UL spec, CE compliant to low voltage and EMC directives.n 10' shielded extension available as an option.n Control assembly is supplied in black only.n Quantities delivered in 4-5 weeks.
Standard Features
n Heavy duty, grounded metal housing.n 115 or 230 input voltage versions available.n IR interference filter for cool illumination.n Full illumination on .60" active diameter input.n Solid state dimmer control.n Interchangeable Modulamp® Units offer 2 positions to maximize individual
lamp efficiencies.n Choice of three, 150 watt halogen lamps - EJA, EKE, and DDL for intense,
uniform illumination.n Built-in thermal shut down.n Quiet rear exhaust.n Zero to full intensity.n Stackable with retractable handle.n Low housing temp - slightly above ambient.n Detachable IEC cord.n 3-year warranty (excludes lamp and socket).n Manufactured in the USA.
A20560
Optionsn Rear baffle.n Shutter module.n Infinite setting, thirteen blade iris
diaphragm version available to reduce
intensity while maintaining color
temperature.
01.01.05 REV F
Power Consumption 190 Watts (nominal)
Output Voltage 0 - 21 VAC
Fiber Receptacle .720 (13.3)
Input Voltage 115 VAC / 60 Hz
230 VAC / 50/60 Hz
Temperature Range: Operating 0° to 50°C
Power Supply Specifications
ACE® Remote Power Supply Modulamp®/lamp not included
10" Extension Cord with CPC connectors, A29505
ColdVis ion Ser ies
Product improvements may result in specificationor feature changes without notice.
Fiber OpticsSCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics
Modulamp®... SCHOTT Innovation! Twopositions optimize light intensity output,depending on the lamp in use. Entirehousing is interchangeable for quicksetup.
Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL) offerlight intensity and color temperatureoptions to maximize productivity and accuracy.
Solid State Dimmer..SCHOTT Control! Continuous intensity control for lamp life management.
Input: 115 VAC/60 Hz, 230 VAC/50/60 Hz, Output: 0–21 VAC
ACE® Remote Light SourceDimensions in ( ) are in mm
DCR ® III Light Source with EKE lamp, A20800
DCR® III Light Source Models
Light Sources with Iris Diaphragm and US Power Cord Included
Standard Light Sources with US Power Cord Included
EKE, DDL, and EJA lamps and Modulamp® units canbe purchased separately.
Part No. Description
A20800 with EKE Lamp
A20800.1 with EJA Lamp
A20800.2 with DDL Lamp
A20810 with EKE Lamp
A20810.1 with EJA Lamp
A20810.2 with DDL Lamp
A20801 No Lamp – Power Supply Only
A20820 with EKE Lamp
A20820.2 with DDL Lamp
A20830.2 with DDL Lamp
DCR® III Light SourceDC regulated light source provides intense, cool illumination.
Standard Features■ DC-regulated light source limits light fluctuation to ± 0.5% due to
line voltage variation.■ Universal input voltage – accepts 90 to 265 VAC.■ Current limiting – protects the unit from over heating due to defective and
aging bulbs.■ Transient protection – allows remote location of bulb.■ Lamp change indicator light – LED located on front panel changes from
green to red when lamp should be replaced. This is due to either an open
or partially shorted filament.■ Soft start “lamp saver” circuitry.■ IR interference filter for cool illumination.■ Solid state dimmer control for continuous dimming.■ Interchangeable Modulamp® Units offer 2 lamp positions to maximize
individual lamp efficiencies.■ Choice of three, 150 watt halogen lamps - EJA, EKE and DDL for intense,
uniform illumination.■ Can power the RS232 from the 9-pin connector.■ Built-in 9-pin connector for analog remote control or RS-232 connection.■ Detachable IEC cord.■ Quiet rear exhaust.■ CSA approved to UL spec, CE compliant.■ Stackable, with retractable handle.■ Low housing temp – slightly above ambient. ■ 2-year warranty (excludes lamp and socket).■ Manufactured in the USA.
A20800
Options■ Rear baffle.■ Dimmer lock.■ Mechanical shutter.■ Wired, manual remote control and
RS232 connection.■ Infinite setting, thirteen blade iris
diaphragm version available to reduce
intensity while maintaining color
temperature.
01.10.01 REV F
Rated Power Output 150 Watts
Output Voltage 0.0, 0.5 to 20.5 VDC
Input Voltage Rating, 50/60 Hz. 90 to 265 VAC
Power Factor Correction @ 230 VAC, 50 Hz. > 0.99, < 4°
Hold-up Time, Nominal AC Input, Full Load 8.3 milliseconds
Line Regulation, Over Entire Input Range ±0.5%
Current Limit Set Point 8.5 Amps
Temperature Range: Operating 0° to 45°C
Storage -25° to 85°C
Relative Humidity, Non-condensing 5% to 95%
Power Supply Specifications
ColdVis ion Ser ies
LIG
HT
SO
UR
CE
S
Light Source without Modulamp® Unitand US Power Cord Included
Standard Light Sources EU Version - No Power Cord Included
Light Sources with Iris Diaphragm EU Version - No Power Cord Included
Product improvements may result in specificationor feature changes without notice.
Fiber Optics
SCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics
Modulamp®... SCHOTT Innovation! Twopositions optimize light intensity output,depending on the lamp in use. Entirehousing is interchangeable for quicksetup.
Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL) offerlight intensity and color temperatureoptions to maximize productivity and accuracy.
Note: If the intensity control knob is turned to the R (Remote) position, lamp intensity control isswitched to the rear 9-pin connector. Front panelintensity control will always override the remoteintensity control.
Input: 115/230 VAC – 50/60 Hz, Output: 0–20.5 VDC
DCR® III Plus Light SourceDimensions in ( ) are in mm
TE
CH
NIC
AL
SP
EC
IFIC
AT
ION
S
Part No. Description
A20870 with EKE Lamp
A20870.1 with EJA Lamp
A20870.2 with DDL Lamp
A20871 with EKE Lamp
A20871.1 with EJA Lamp
A20871.2 with DDL Lamp
A20872 No Lamp – Power Supply Only
A20875 with EKE Lamp
A20875.1 with EJA Lamp
A20875.2 with DDL Lamp
A20876 with EKE Lamp
A20876.1 with EJA Lamp
A20876.2 with DDL Lamp
A20877 No Lamp – Power Supply Only
A20665 Triple Cable with Plug, 12"
DCR® III Plus Light SourceIncludes all the standard features of the DCR® III in addition to a built-in RS232
interface providing intense, cool illumination via remote control.
Benefitsn Remote controllable using built-in integrated RS232 interface.n Designed to control up to three additional DCR® III units via a built-in
15-pin connector. Expansion cable and DCR® III light sources sold separately.n Automatically restores user settings on power up.n Enhanced communications available by embedding error checking codes in
command strings.n Easier programmability with simplified command structure.
Standard Featuresn DC-regulated light source limits light fluctuation due to line voltage
variation up to ±0.5%.n Current limiting circuitry protects the unit from over heating due to
defective and aging bulbs.n Lamp indicator light (LED) located on front panel changes color from green
to red when lamp requires replacement. Lamp status output on RS232 is
available.n Solid state intensity control adjusts from 0 to 100% light output.n Interchangeable Modulamp® units offer 2 lamp positions to maximize
individual lamp efficiencies.n Soft start “lamp saver” circuitry.n IR interference filter for cool illumination.n CSA certified to UL, CE compliant to low voltage and EMC directives.n Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.n Stackable, with retractable handle and detachable cord.n 2-year warranty (excludes lamp and socket).n Manufactured in the USA.
Light Source without Modulamp® Unit
US Power Cord Included
DCR ® III Plus Light Source with EKE lamp, A20870
DCR® III Plus Light Source Models
Light Sources with Iris Diaphragm
US Power Cord Included
Standard Light Sources US Power Cord Included
EKE, DDL, and EJA lamps and Modulamp® units canbe purchased separately.
A20870
Optionsn Rear baffle.n Dimmer lock.n Mechanical shutter.n Infinite setting, thirteen blade iris
diaphragm version available to reduce
intensity while maintaining color
temperature.n Expansion cable.n Remote light source.
Rated Power Output 150 Watts
Output Voltage 0.0, 0.5 to 20.5 VDC
Input Voltage Rating, 50/60 Hz. 90 to 265 VAC
Power Factor Correction @ 230 VAC, 50 Hz. > 0.99, < 4°
Hold-up Time, Nominal AC Input, Full Load 8.3 milliseconds
Line Regulation, Over Entire Input Range ±0.5%
Current Limit Set Point 8.5 Amps
Temperature Range: Operating 0° to 45°C
Storage -25° to 85°C
Relative Humidity, Non-condensing 5% to 95%
01.11.01 REV D
Power Supply Specifications
ColdVis ion Ser iesL
IGH
T S
OU
RC
ES
Expansion Cable
Standard Light Sources EU Version - No Power Cord Included
Light Source with Iris Diaphragm
EU Version - No Power Cord Included
Light Source without Modulamp® Unit
EU Version - No Power Cord Included
Product improvements may result in specificationor feature changes without notice.
Fiber OpticsSCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics
Modulamp®... SCHOTT Innovation! Twopositions optimize light intensity output,depending on the lamp in use. Entirehousing is interchangeable for quicksetup.
Choice of Lamps.. SCHOTT Versatility!Three different bulbs (EJA, EKE, DDL) offerlight intensity and color temperatureoptions to maximize productivity andaccuracy.
Note: If the intensity control knob is turned to the R (Remote) position, lamp intensity control isswitched to the RS232 interface. Front panel intensi-ty control will always override the remote intensitycontrol. Remote control of attached DCR IIIs isdependent on each individual unit’s setting, whichshould be in R (Remote) position for remote control.
DCR® III Plus Light SourceDimensions in ( ) are in mm
9-PIN Connector
User SuppliedRS232 M-F Extension Cables
15-PIN Connector
SCHOTT EXPANSIONCABLE (A20665)
DCRIII Plus/IV Light Source
ComputerSerial Port DCRIII Light Source
DCRIII Light Source
DCRIII Light Source
9-PIN Connector
Light Source without Modulamp® UnitUS Power Cord Included
DCR ® IV Light Source with DDL lamp, A20890
DCR® IV Light Source Models
Light Source with Iris Diaphragm US Power Cord Included
Standard Light Sources US Power Cord Included
DDL lamp and Modulamp® units can be purchasedseparately.
Part No. Description
A20890 Integrated Equalizer™ (complete with
Reference Modulamp® assembly
and DDL Lamp).
A20891 Integrated Equalizer™ (complete with
Modulamp® assembly and DDL Lamp.
Does not include reference bundle).
A20892 Modulamp® with DDL Lamp
A20893 No Lamp – Power Supply Only
A20895 Integrated Equalizer™ (complete with
Reference Modulamp® assembly
and DDL Lamp).
A20896 Integrated Equalizer™ (complete with
Modulamp® assembly and DDL Lamp.
Does not include reference bundle).
A20897 Modulamp® with DDL Lamp
A20898 No Lamp – Power Supply Only
A20665 Triple Cable with Plug, 12"
DCR® IV Light SourceDC regulated light source with integrated Equalizer™ light feedback to provide
stabilized light output for the most demanding machine vision inspection
applications. (See DCR® III Plus datasheet for base description.)
Benefitsn Stable lamp output over the life of the lamp and minimized lamp to lamp
variation.n Remote controllable using integrated RS232 interface.
Standard Featuresn Flexible - Two configurations available:
A. DCR® IV used with a reference Modulamp® unit and off-the-shelf fiber
optics, maintains DDL lamp output at ±2% over the life of the lamp and±8% lamp to lamp.
B. For even greater control, use the DCR® IV with fiber optic products that
have an integrated reference bundle; special order only. This will
maintain DDL lamp output and lamp to lamp variation within ±1%. n All of the features of the DCR® III Plus Light Source including control of up
to three additional DCR® III light sources via an expansion cable.n LED’s located on the front panel indicate that the lamp intensity is stabilized.n Easy to use front panel controls for calibration and intensity control.n CSA certified to UL, CE compliant to low voltage and EMC directives.n Universal input voltage – accepts 90 to 265 VAC, 50/60 Hz.n Stackable, with retractable handle and detachable cord.n 2-year warranty (excludes lamp and socket).n Manufactured in the USA.
A20890
Options
n Rear baffle.
n Dimmer lock.
n Mechanical shutter.
n Infinite setting, thirteen blade iris diaphragm
unit available to reduce intensity while
maintaining color temperature. Cannot be
used with reference Modulamp®.
n Expansion cable. 01.12.01 REV D
Light Output with Reference Modulamp Unit ±2%
Light Output with Independent Reference Bundle ±1%
Lamp to Lamp Variation with Reference Modulamp Unit ±8%
Lamp to Lamp Variation with Independent Reference Bundle ±1%
Rated Power Output 150 Watts
Output Voltage 0.0, 0.5 to 20.5 VDC
Input Voltage Rating, 50/60 Hz. 90 to 265 VAC
Power Factor Correction @ 230 VAC, 50 Hz. > 0.99, < 4°
Hold-up Time, Nominal AC Input, Full Load 8.3 milliseconds
Line Regulation, Over Entire Input Range ±0.5%
Lamp Type DDL, Ushio or GE, 150 W Halogen Bulb
Current Limit Set Point 8.5 Amps
Temperature Range: Operating 0° to 45°C
Storage -25° to 85°C
Relative Humidity, Non-condensing 5% to 95%
Performance Specifications
ColdVis ion Ser ies
Expansion Cable
Power Supply Specifications
Standard Light Sources EU Version - No Power Cord Included
Light Source with Iris Diaphragm EU Version - No Power Cord Included
Light Source without Modulamp® UnitEU Version - No Power Cord Included
Product improvements may result in specificationor feature changes without notice.
Fiber OpticsSCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics
DDL lamp is offered as the standard lampfor this unit.
Note: If the intensity control knob is turned to the R (Remote) position, lamp intensity control isswitched to the RS232 interface. Front panel intensi-ty control will always override the remote intensitycontrol. Remote control of attached DCR IIIs isdependent on each individual unit’s setting, whichshould be in R (Remote) position for remote control.
DCR® IV Light SourceDimensions in ( ) are in mm
9-PIN Connector
User SuppliedRS232 M-F Extension Cables
15-PIN Connector
SCHOTT EXPANSIONCABLE (A20665)
DCRIII Plus/IV Light Source
ComputerSerial Port DCRIII Light Source
DCRIII Light Source
DCRIII Light Source
9-PIN Connector
60%
65%
70%
75%
80%
80%
85%
90%
95%
100%
0 5 10 15 20
Lamp Intensity vs. Time
Equalizer™ LightFeedback Module
DC Regulated Light SourceWithout Feedback
Equa
lizer
™M
odul
e
DC
Regulated
LightSourceW
ithoutFeedback
Days
DDDDLL
MHR ®-50 Light Source, A20900
MHR®-50 Light Source Models
Part No. Description
A20900 MHR-50 with 50W Lamp
A20901 Replacement 50W Lamp
MHR®-50 Light SourceCompact metal halide regulated light source for applications that
require bright, white light.
Standard Features■ Color temperature of 6000K.■ Twice the light output of DDL lamps.■ Bulb lifetime of 3500 hours average at 50W output.■ Metal halide lamp specifically designed with highest uniformity.■ Solid state dimmer control.■ Heavy duty, grounded metal housing.■ Universal input voltage - accepts 90 to 265 VAC.■ IR interference filter for cool illumination.■ Full illumination on .50 active diameter input.■ Soft start “lamp saver” circuitry.■ Built-in 9-pin connector for analog remote control.■ Built-in thermal shut down.■ Quiet rear exhaust.■ Infinite setting, thirteen blade iris diaphragm to reduce intensity while
maintaining the color temperature.■ Stackable with retractable handle.■ Low housing temp - slightly above ambient.■ Detachable IEC cord.■ CSA approved to UL spec, CE compliant.■ 2-year warranty (excludes lamp and socket). ■ Manufactured in the USA.
Benefits■ More light output than Halogen
Lamps with similar lifetimes.■ Extremely high light output available
at shorter lifetimes.■ Extremely high uniformity.
01.15.01 REV A
Rated Power Output 40 to 60 Watts
Output Current @ 50V 0.8A to 1.3A
Input Voltage Rating, 50/60 Hz. 90 to 265 VAC
Input Surge Current (cold start) Less than 37A
Input Frequency 47 - 63 Hz
Hold-Up Time, nominal AC input, full load 500 ms
Efficiency, nominal AC line, full power 72 - 85% typ.
Temperature Range: Operating 0° to 45°C
Storage -25° to 85°C
Relative Humidity, non-condensing 5% to 95%
Light intensity PARD (Periodic and Random Deviation) - Better than 80 dB down
FCC & VDE - Class A EMI Filter
Power Supply Specifications
ColdVis ion Ser ies
LIG
HT
SO
UR
CE
S
Product improvements may result in specificationor feature changes without notice.
MHR®-50 Light SourceDimensions in ( ) are in mm
TE
CH
NIC
AL
SP
EC
IFIC
AT
ION
S
Lamp Output, without filters
Fiber Optics
SCHOTT North America, Inc.62 Columbus StreetAuburn, NY 13021-3137USAPhone: +1315/255-2791Fax: +1315/255-2695E-mail: [email protected]/fiberoptics
Diffuse DomeFor use with 4” Fiber Optic Ringlight A08700
Standard Features� Eliminates specular glints and/or shadows on reflective parts� Used in conjunction with 4” diameter ringlight A08700� 4.9” (124 mm) diameter x 2.70” (69 mm) height (without ringlight)� Viewing aperature: 0.98 (25 mm)
Typical Applications
� Data matric code reading� OCR/OCV� Semiconductor wafer inspection� Foil inspection� Can inspection
Diffuse Dome A25045 with Ringlight, A08700(Ringlight not included)
01.22.10 REV A
Diffuse Dome A25045 with Ringlight, A08700(Ringlight not included)
ColdVis ion Ser ies
Dimensions in [ ] are mm. All other dimensions are Inches.
Product improvements may result in specificationor feature changes without notice.
Lighting and ImagingSCHOTT North America, Inc.122 Charlton StreetSouthbridge, MA 01550USAPhone: +1508/765-9744Fax: +1508/764-6273E-mail: [email protected]/lightingimaging