aceolator - ace-ace.de€¦ · hydraulic dampers, hydraulic feed controls, rotary dampers, tubus...

ACEolatorIsolates Undesired Vibrations

Vibration Technology

Issue May 2015

Automation Control Equipment

For support please contact the international help desk

T +49 (0)2173- 9226-4100 F +49 (0)2173- [email protected] local support please contact your ACE distributor on page 64 and 65.

Room for your company stamp or company sign

Issu

e 05

.201

5

ACE is the internationally recognised expert in the field of industrial damping technology – with representative offices in 45 countries on all continents. ACE has also been active in Germany since 1978. A team of 25 engineers work in this country alone on further developing the product range every day.

We are your specialists for industrial damping technology

ACE customers profit from well-conceived solutions, valuable

innovations and model service for all damping technology issues.

Thanks to its close cooperation with leading mechanical engineer-

ing companies, the German ACE branch office has recently

established itself as a pioneer of technical progress in damping

technology.

This catalogue is a decisive step – a much expressed desire of our

customers: the realisation of offering everything from one source

for damping technology and vibration isolation.

ACE develops, produces and distributes a broad spectrum of

damping products. These include industrial and safety shock

absorbers, profile dampers, rotary dampers, industrial gas

springs, brake cylinders, vibration isolators, air springs and oil

brakes.

The products are particularly successful with forward-looking

companies, because there are no better solutions available for

braking moving masses rapidly, gently and precisely or for

isolating harmful vibrations.

Safety Products LOCKED Clamping Elements, Safety Shock Absorbers, TUBUS Single Hit Damper

Vibration Control Rubber-Metal Isolators, Vibration-Isolating Plates, Low-Frequency Air Spring Elements

Industrial Motion Control Gas Springs Push Type, Gas Springs Pull Type, Hydraulic Dampers, Hydraulic Feed Controls, Rotary Dampers, TUBUS Spring

Industrial Automation Control Industrial Shock Absorbers, TUBUS Profile Dampers, TUBUS Press Dampers, SLAB SL-030 to SL-300

Automation Control Equipment

ACE Stoßdämpfer GmbH . P.O. Box 1510 . D-40740 Langenfeld . T +49 (0)2173 - 9226 - 4100 . F +49 (0)2173 - 9226 - 89 . [email protected]

Our Complete Product Range33

Vibration isolation 6

Product overview and application areas 10

Product selection guide 12

01 - Rubber-Metal Isolators 14

02 - Vibration-Isolating Plates 44

03 - Low-Frequency Air Spring Elements 54

International distributors 64

Calculation sheet 66

Contents

General

Contents44

Issu

e 05

.201

5

Rubber-Metal Isolators01

03

02

LEV Levelling Mounts (height-adjustable machine feet) 16

CM Cup Mounts 18

COM Compression Mounts (pre-tensioned high-performance bearing surface) 22

AAM All Attitude Mounts (vibration-isolating fasteners) 30

SFM Stable Flex Mounts (stable machine feet) 34

BM Bubble Mounts (low-frequency vibration isolators) 38

UMO Universal Mounts (universal connection isolators) 40

FL Flex Loc (quick fastening elements) 42

SLAB Damping Plates 47

CEL Elastomer Plates 50

PAD Rugged Fibre and Elastomer Plates 52

Vibration-Isolating Plates

Low-Frequency Air Spring Elements

PLM Pneumatic Air Spring Elements 56

PAL Air Spring Elements with Automatic Level Controls 58


Products

Contents55

Issu

e 05

.201

5F1

F2t

+a

-a

0

Measurement of degree of isolation

Vibration Isolation

Noise reduction and vibration isolation are becoming more and more important in our daily lives. This applies in particular to the workplace and the environments around production companies.

Preventing noise emissions or harmful vibrations is therefore not only a necessity required by noise protection

and occupational health and safety legislation; their sources must also be localised by means of targeted

analyses in order to develop suitable improvement measures for achieving, for example, increased production

quality. A second by-product of vibrations are their effects on the surrounding production environment and any

measuring and testing facilities that may be in use.

Preventive vibration isolation leads to

improved working conditions for people and the environment

more accurate production tolerances and thereby increased product quality

competitive and cost advantages thanks to lower reject rate in production

increased production speed thanks to increased maximum machine dynamics

longer tool and machine life thanks to lower stress

faster and more accurate measuring results


66

Issu

e 05

.201

5

A machine connection as an example for source isolation

A measuring machine as an example of receiver isolation

Types and mode of action of vibration isolation

Vibration isolation is generally subdivided into source isolation and receiver isolation. In source isolation

(emission protection), for example, a press or a machine is isolated from its foundation so that the vibrations

are damped to a desired extent.

In the case of receiver isolation, however, the object to be protected, e.g. a measuring table, is isolated from

the foundation. If the machinery or equipment is rigidly connected with the foundation, one can assume an

almost 100% transmission of vibrations or shocks.

The task of vibration isolation for machinery and equipment is to reduce the transmission of mechanical

vibrations and reciprocal forces by installing elastic, damping components.

However, it is not always possible in practice to provide a desirably elastic (soft) support for all machines,

foundations, measurement facilities and building parts. Users are forced therefore to aim for a viable state

between system stability and degree of isolation.

Our technicians and engineers are happy to assist you in selecting products and solutions.


Technical Notes

Effectiveness, Calibration, Quick Selection77

2

10

100

Isol

atio

n ra

nge

in H

z

PAL pneuma-tic isolators

PLM pneuma-tic mounts

Elastomersupport

Isolatingplate

Issu

e 05

.201

5

Effectiveness and vibration calibration

In order to assess the effectiveness of isolation elements for harmonic vibrations, one relates the excitation

frequency fe (machine speed in 1/s) of the isolator to the natural frequency f0. It may generally be assumed that

the effectiveness of an isolation increases with the decreasing natural frequency of the system. If the ratio ɳ of

the excitation frequency to the natural frequency of the system is larger than √2, one may refer to an isolation

effect. Furthermore, the degree of effectiveness (isolation) increases in proportion to the ratio (ɳ = fe / f0).

If the ratio is lower than √2, the vibrations become amplified. This is particularly the case in the resonance

range if the disturbance frequency is equal to the natural frequency of the isolator (ɳ = fe / f0 = 1).

Damping (D) plays an additional, not unimportant role in vibration isolation. When ramping up machines to their

operating speed or when ramping down, the natural frequencies of the vibration isolation are generally passed

through. In order not to exceed the amplitudes or limit values when passing through the resonances, sufficient

damping must be in place.

More complex vibration states

In case of more complex vibration states, a prior vibration analysis is recommended. In this process,

the measured time signal is transformed into the frequency range. This allows for an evaluation of

the frequencies for which an isolation is required. The selection of isolation material is then made for

the lowest excitation frequency to be isolated.

Quick selection

Different materials can be used to isolate machinery and

equipment. These differ in material, form and mode of

action. The following quick selection will allow an initial

rough estimation by showing you the effectiveness of the

different damping products.

Unlike uniform vibrations, shocks induced by machinery,

equipment or production processes differ in their time

profile and intensity. Our application engineers are happy

to assist you in selecting the right shock absorber. In

addition, selection ranges which suit your needs are

available on our homepage.

Application ranges of isolators


Effectiveness, Calibration, Quick Selection

Technical Notes88

100

10

2

100

10

11 10 60

Exci

tatio

n fre

quen

cy (H

z)

Isol

atio

n ra

nge

Natural frequency (Hz)

Resonance transmissibilit

y

Isolat

ion

90%

80%

70%60%

Trans

fer 1:1

100

10

11 10 60

Exci

tatio

n fre

quen

cy (H

z)


Resonance transmissibilit

y

Trans

fer 1:1

100

10

2

Isol

atio

n ra

nge

PAL pneumatic isolators

PLM pneumatic mounts

Elastomer support

Isolating plate

tTime range Frequency range

Signal conversion via"Fast Fourier Transformation"

or "FFT".

m/s² m/s²

f

FFT

100

80

0

20

40

60

1 2 4 53 6Is

olat

ion

fact

or [%

]Frequency ratio

D=0.1

D=0.2

ɳ√2

D=0.5

4

3

0

1

2

0 1 3 42 5

Tran

smis

sibi

lity

Frequency ratio

D=0.1

D=0.2

ɳ

D=0.5

√2

Issu

e 05

.201

5

Transmissibility depending on frequency ratio and damping degree

Isolation factor depending on frequency ratio and damping degree


Diagrams

Technical Notes99

Frequency and Weight Ranges / Application Areas

Product Overview

Issu

e 05

.201

5

Type Machines Transfer systems

ConstructionTransport

BlowerFan Foundations

Control unitsElectrical systems

Off-road vehicles

EnginesGenerators Compressors Oil and

gas industryAerospace

engineering Presses Medicine Measuring tables

Test benches Type

Rubber-Metal Isolators Rubber-Metal IsolatorsLEV LEVCM CMCOM COMAAM AAMSFM SFMBM BMUMO UMOFL FL

Vibration-Isolating Plates Vibration-Isolating PlatesSLAB SLABCEL CELPAD PAD

Air Spring Elements Air Spring ElementsPLM PLMPAL PAL

Type Effective Direction

Load Range kg

Natural Frequency RangeHz

Rubber-Metal Isolators

LEV 45 - 5900 8 - 24

CM 3 - 750 12 - 35

COM 6.5 - 1814 4.5 - 16

AAM 0.5 - 22.7 16 - 46

SFM 20 - 1000 8 - 13

BM 0.7 - 8.2 8 - 16

UMO For plate thickness G1*:For plate thickness G2*:

axial8 - 545

24 - 2065

radial4 - 30010 - 640

15 - 24

10 - 19

FL2 - 28

0.4 - 5not specified

Frequency and weight ranges

Application overview* See page 41.

Issu

e 05

.201

5


1010

Type Machines Transfer systems

ConstructionTransport

BlowerFan Foundations

Control unitsElectrical systems

Off-road vehicles

EnginesGenerators Compressors Oil and

gas industryAerospace

engineering Presses Medicine Measuring tables

Test benches Type

Rubber-Metal Isolators Rubber-Metal IsolatorsLEV LEVCM CMCOM COMAAM AAMSFM SFMBM BMUMO UMOFL FL

Vibration-Isolating Plates Vibration-Isolating PlatesSLAB SLABCEL CELPAD PAD

Air Spring Elements Air Spring ElementsPLM PLMPAL PAL

Type Load RangeN/mm2



SLAB 0.002 - 0.5 12 - 50

CEL 0.35 - 2.1 11 - 60

PAD 0 - 13.8 for shock absorption only

Typ Load Rangekg



PLM 20 - 8800 3 - 10

PAL 36 - 42 000 1.3 - 2.7

Issu

e 05

.201

5


Frequency and Weight Ranges / Application Areas

Product Overview1111

2

1

Critical performance areaIn the area shown here in red, there is either no

improvement or only a very minor improvement in the starting vibration situation. This critical performance area

also corresponds to the area of resonance.

Issu

e 05

.201

5

Quick selection of suitable isolation products made easy!

The majority of isolation solutions can be found with the relatively easy use of diagrams. They allow a simple relation to be made between natural frequency, the predominant excitation frequency and the degree of isolation to be expected.

1 Natural frequencies of products in relation to the load in kg per element (rubber-metal isolators) or N/mm² as surface pressure (damping plates).

2 Spring characteristic according to load or surface pressure. 3 Relationship diagram

with relation between excitation frequency and the required natural frequency of an isolator in relation to the desired isolation result.

As marked in the diagrams, we recommend the use of

products with a theoretical degree of isolation of 50%

or higher. Another rough guide value for an efficient

and cost-effective vibration isolation is a ratio of

roughly 3 between the excitation frequency of the

isolator and the predominant natural frequency.

The quick selection guide is based on the physics of a

single degree of freedom system. With more complex

and non-rigid systems and superstructures, it is

always recommended to contact a technical

consultant or application engineer.

The selection tables were prepared according to our

best knowledge; their use excludes entitlement to

legal and warranty claims. On request, ACE offers

consultation and measurement services separately to

this approximate preselection.

Using the diagram

ExampleA user has a 1,000 kg machine with 1,800 1/min, which corresponds to an excitation frequency of 1,800 / 60 = 30 Hz. Furthermore, the user would like to achieve a good isolation from the floor by using 4 CM cup mounts (250 kg per isolator).

The selection is as follows:

1 Draw horizontal line in diagram 1 at 250 kg Load per isolator. The line intersects 3 products as solutions, with the most cost-effective being the CM-VSC3-40 in this case.

2 Draw horizontal line in diagram 3 at 30 Hz excitation frequency.

3 Draw a vertical line from the intersection point in diagram 1 downwards until the horizontal line previously drawn in diagram 3 is met.

4 Now you can simply read the isolation to be anticipated: in this case it is 70%, which represents a good isolation value.

5 Continue to draw the horizontal line from diagram 1 until it intersects the product line CM-VSC3-40 in diagram 2. Here the value for the static deflection can be read on the x-axis below. In this example, the reference value is 1.5 mm.

1212

25

30

150140130120110100

9080

70

60

50

40

35

30

25

201816

14

12

10

40

45

60

7065

8090

100

120

140

160

200

250

300

350

400450

600550500

650700750800

10 12 14 16 18 20 25 30 35 40 0.5 1 1.5 2 2.5 3 3.5411

0.1

50%60%70%80%

90% isolation

VSC3-25

VSC3-40

VSC3-65

VSC3-90


Load

per

isol

ator

(kg)

Static deflection (mm)

Exci

tatio

n fre

quen

cy (H

z)

NotesThe diagrams represent a simplified form of the preselection. Liability and compensation claims are excluded.

5

1 2

3

4

3

Issu

e 05

.201

5

Example Diagram


Instructions

Performance Diagrams1313


01

1414

Issu

e 05

.201

5

LEV Levelling Mounts (height-adjustable machine feet) Secure, adjustable stabilisation for all types of machines, transfer systems, assembly stations, etc.

CM Cup Mounts For isolating machinery and equipment. Fail-safe isolators for all axes in any installation position. Application examples: compressors, off-road vehicles, engines, fans, etc.

COM Compression Mounts (pre-tensioned high-performance bearing surface) Vertically acting isolators for machinery and equipment. Applications include: blowers, compressors, motors, generators, presses, etc.

AAM All Attitude Mounts (vibration-isolating fasteners) Maintenance free isolators for decoupling parts and components in electronics, aerospace, the military, medicine transfer systems, etc.

SFM Stable Flex Mounts (stable machine feet) Extremely rugged and maintenance-free isolators, e.g. for marine applications, for diesel generators, in power generation or in off-road vehicles.

BM Bubble Mounts (low-frequency vibration isolators) For protecting small devices and electronic components, e.g. in medical technology, aerospace, electronic systems or computers.

UMO Universal Mounts (universal connection isolators) Maintenance-free connection isolators which can be implemented both radially and axially. Application examples: conveying systems, machin-ery and equipment, off-road, oil and gas industry, control systems, etc.

FL Flex Locs (quick fastening elements) Simple, efficient components with versatile applications as isolating fasteners for decoupling structure-borne sound in enclosures, housings, equipment and machinery. For application in mechanical engineering, in buildings, vehicles, or navigation.



Overview1515

Issu

e 05

.201

5

Properties Easy to level Vibration-reducing Noise-reducing Improved product quality Maintenance-free Compensates for floor unevenness Special models available on request Special vibration-isolating feet according to design and custom-made product All metal parts galvanised (ROHS compliant) Rubber part made of neoprene (chloroprene rubber) Operating temperature range -30 °C to +80 °C

Areas of application Injection moulding machines Conveyors Production and processing centres Assembly stations Small presses, etc.

Height-adjustable machine feet from the LEV product group are maintenance-free and ready-for-installation. The precise, adjustable LEV machine feet are used whenever machines require an adjustable, stable positioning.

Their function ensures the secure positioning of machinery and equipment, protecting them against damaging shocks and vibrations.

LEV machine feet can be supplied in different sizes, from M10 to M24 threads, and can secure and bear loads in these sizes from 45 to

5,900 kg.

The selection of suitable machine feet is simply made via the given mass of the machine or plant distributed among the desired support

points. A weight distribution within the system must be considered in such a way that the feet are also measured with the associated

load component. If additional dynamic loads are exerted by the machine or plant, the next largest type must be chosen in a borderline

static load case.

The mounts meet OSHA requirements for anchoring machines.

LEV Levelling Mounts Height-adjustable machine feet



LEV – Levelling Mounts1616

Issu

e 05

.201

5

D H L

M

Type

Min. Load kg

Max. Load kg


M Lmm

D mm

H mm

LEV-52221-M10 45 230 8 - 24 M10x1.5 80 80 38

LEV-52224-M12 135 450 8 - 24 M12x1.75 130 120 38

LEV-52226-M20 230 2040 8 - 24 M20x2.5 130 160 41

LEV-52229-M24 1815 5900 8 - 24 M24x3.0 180 230 57

Standard delivery with hexagon nut

LEV M10 to M24

Metal housing with high load-support capacity

Neoprene elastomer. The machine is prevented from moving.

Lock screw is secured against the machine foot after the machine has been levelled out.

Installation sketch



LEV – Levelling Mounts1717

Issu

e 05

.201

5

Properties Fail-safe Can be installed in all spatial axes

Can be used for shear, compressive and tensile loads Available with centric thread or through-hole All metal parts galvanised, aluminium or stainless steel available on request Operating temperature range -30 °C to +80 °C for neoprene Operating temperature range -60 °C to +150 °C for high-damping silicone

Areas of application Compressors and other vibrating machines Electronic control units and systems Crusher plants Fans and blowers in construction machinery and in buildings Off-road vehicles Shipbuilding Aircraft construction

The CM cup mounts protect machinery, vehicles and equipment against damaging vibrations and shocks. They are maintenance-free machine elements.

The correct function of the mounts is guaranteed even in an arduous environment due to the fail-safe design

of the machine elements. The low-profile CMs are able to isolate machine parts from each other in an

effective way. The CMs can be installed in the applications freely in space (X, Y and Z) and at any inclination.

Standard CMs are manufactured and delivered with neoprene as damping material.

For applications in the areas of heavy shocks (off-road) and extreme temperatures, we recommend the use

of the CMs with high-damping silicone as damping material. Under normal loading conditions, the CMs have

a natural frequency of up to 12 Hz (please refer to the selection diagram for more exact values).

CM Cup Mounts



CM – Cup Mounts1818

Issu

e 05

.201

5

Type

Min. Loadkg

Max. Loadkg

M Screw-in Depth mm

A mm

B mm

D mm

C mm

H mm

l mm

Weight kg

CM-VSC1-2 3 16 M6 or M8 20 60 49.5 58 5.5 28 18 0.2

CM-VSC1-4 7 35 M6 or M8 20 60 49.5 58 5.5 28 18 0.2

CM-VSC1-7 14 60 M6 or M8 20 60 49.5 58 5.5 28 18 0.2

CM-VSC1-10 25 100 M6 or M8 20 60 49.5 58 5.5 28 18 0.2

CM-VSC2-5 9 35 M10 or M12 30 76 63.5 76 6.4 38 25 0.45

CM-VSC2-10 14 60 M10 or M12 30 76 63.5 76 6.4 38 25 0.45

CM-VSC2-15 25 90 M10 or M12 30 76 63.5 76 6.4 38 25 0.45

CM-VSC2-25 50 200 M10 or M12 30 76 63.5 76 6.4 38 25 0.45

CM-VSC2-40 35 250 M10 or M12 30 76 63.5 76 6.4 38 25 0.45

CM-VSC3-25 25 210 M16 19 133 108 124 11.9 63 38 1.8

CM-VSC3-40 45 350 M16 19 133 108 124 11.9 63 38 1.8

CM-VSC3-65 60 500 M16 19 133 108 124 11.9 63 38 1.8

CM-VSC3-90 80 750 M16 19 133 108 124 11.9 63 38 1.8

B

M 4xC

A

D

H

I

CM-VSC1 / CM-VSC2 / CM-VSC3

Difference between stationary and mobile application in the selection diagrams

Stationary applications are those in which the cup mounts isolate stationary

machines, plants, etc.

Mobile applications, however, refer to applications in which the cup mounts

isolate engines, rotors or other parts on moving vehicles. Their range of

application is reduced because, in addition to static load, there are additional

dynamic loads exerted by the movement which must be considered.




1

150140130120110100

9080

70

60

50

40

35

30

25

201816

14

12

10

2

3

4

56789

10121416

20

2530354045505560708090

100120140160

200

250

10 12 14 16 18 20 25 30 35 40 0.5 1 1.5 2 2.5 3 3.5411

0.1

VSC1-2

VSC1-4

VSC2-5

VSC1-7VSC2-10

VSC2-15

VSC2-25

VSC2-40

VSC1-10

50%60%70%80%

90% isolation

Mobile application


Load

per

isol

ator

(kg)


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

CM-VSC1 / CM-VSC2




25

30

150140130120110100

9080

70

60

50

40

35

30

25

201816

14

12

10

40

45

60

7065

8090

100

120

140

160

200

250

300

350

400450

600550500

650700750800

10 12 14 16 18 20 25 30 35 40 0.5 1 1.5 2 2.5 3 3.5411

0.1

VSC3-25

VSC3-40

VSC3-65

VSC3-90

50%60%70%80%

90% isolation


Load

per

isol

ator

(kg)

Mobile application


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

CM-VSC3




Issu

e 05

.201

5

Properties Pre-tensioned to enhance efficiency Isolates structure-borne noise Low-frequency application range from about 15 Hz Rugged Maintenance-free All metal parts galvanised (ROHS compliant) Rubber part made of neoprene (chloroprene rubber) Operating temperature range -30 °C to +80 °C

Areas of application Centrifuges Blowers Vibrators and crusher plants Compressors and ventilation systems Injection moulding systems Switch cabinets Military and off-road vehicles

The COM compression mounts are high-performance bearing surface elements for isolating machines and plants. These extremely rugged elastomer bearing surfaces are primarily used in heavy-duty applications, such as in pumps and compressors.

In their operating range, the COMs exhibit a low natural frequency of approx. 8 to 15 Hz and can when necessary

be coupled for certain applications, whereby the natural system frequency can be further reduced to approx.

6 to 10 Hz (please refer to the selection diagram for more exact data). They are often used in situations in which

unbalanced machine parts cause shocks and vibrations which can have a negative impact on the surrounding

area. Disturbance frequencies from 900 min-1 (15 Hz) are effectively isolated. Through the use of the

high-performance bearing surfaces, structure-borne noise paths become interrupted, preventing the generation

of resonant sound.

COM Compression Mounts Pre-tensioned high-performance bearing surfaces



COM – Compression Mounts2222

Issu

e 05

.201

5

Type

Colour Code* Min. Load kg

Max. Load kg

M Lmm

Wmm

Hmm

Amm

Cmm

Dmm

Emm

COM-52501 blue 6.3 15.9 M8x1.25 79.4 44.5 25.4 31.8 60.3 8.7 4.8

COM-52502 black 8.2 20.4 M8x1.25 79.4 44.5 25.4 31.8 60.3 8.7 4.8

COM-52503 red 12.7 31.8 M8x1.25 79.4 44.5 25.4 31.8 60.3 8.7 4.8

COM-52504 green 21.8 54.4 M8x1.25 79.4 44.5 25.4 31.8 60.3 8.7 4.8

COM-52521 blue 24.5 61.2 M10x1.5 98.4 60.3 31.8 44.5 76.2 8.7 5.6

COM-52522 black 30.8 77.1 M10x1.5 98.4 60.3 31.8 44.5 76.2 8.7 5.6

COM-52523 red 43.6 108.9 M10x1.5 98.4 60.3 31.8 44.5 76.2 8.7 5.6

COM-52524 green 69.0 172.4 M10x1.5 98.4 60.3 31.8 44.5 76.2 8.7 5.6

COM-52525 grey 99.8 249.5 M10x1.5 98.4 60.3 31.8 44.5 76.2 8.7 5.6

COM-52541 black 45.4 113.4 M12x1.75 139.7 85.7 44.5 63.5 104.8 14.3 6.4

COM-52542 red 95.2 238.1 M12x1.75 139.7 85.7 44.5 63.5 104.8 14.3 6.4

COM-52543 green 136.1 340.2 M12x1.75 139.7 85.7 44.5 63.5 104.8 14.3 6.4

COM-52544 grey 199.6 499.0 M12x1.75 139.7 85.7 44.5 63.5 104.8 14.3 6.4

* The colour code is for identifying the loading capacity. The products are marked in colour accordingly.

Type


Max. Load kg

M Lmm

Wmm

Hmm

Amm

Cmm

Dmm

Emm

COM-52511 blue 6.3 15.9 M8x1.25 79.4 44.5 31.8 31.8 60.3 8.7 4.8

COM-52512 black 8.2 20.4 M8x1.25 79.4 44.5 31.8 31.8 60.3 8.7 4.8

COM-52513 red 12.7 31.8 M8x1.25 79.4 44.5 31.8 31.8 60.3 8.7 4.8

COM-52514 green 21.8 54.4 M8x1.25 79.4 44.5 31.8 31.8 60.3 8.7 4.8

COM-52531 blue 24.5 61.2 M10x1.5 98.4 60.3 44.5 44.5 76.2 8.7 5.6

COM-52532 black 30.8 77.1 M10x1.5 98.4 60.3 44.5 44.5 76.2 8.7 5.6

COM-52533 red 43.6 108.9 M10x1.5 98.4 60.3 44.5 44.5 76.2 8.7 5.6

COM-52534 green 69.0 172.4 M10x1.5 98.4 60.3 44.5 44.5 76.2 8.7 5.6

COM-52535 grey 99.8 249.5 M10x1.5 98.4 60.3 44.5 44.5 76.2 8.7 5.6

COM-52551 black 45.4 113.4 M12x1.75 139.7 85.7 73 63.5 104.8 14.3 6.4

COM-52552 red 95.2 238.1 M12x1.75 139.7 85.7 73 63.5 104.8 14.3 6.4

COM-52553 green 136.1 340.2 M12x1.75 139.7 85.7 73 63.5 104.8 14.3 6.4

COM-52554 grey 199.6 499.0 M12x1.75 139.7 85.7 73 63.5 104.8 14.3 6.4


M

2xØD

W

LC A

H

E

COM-5251x / COM-5253x / COM-5255x

COM-5250x / COM-5252x / COM-5254x




5

10

15

20

25

3035404550

60

70

55

8090

100110120140160

200

350300

250

400450500

0.30.2 0.40.5 1 1.5 2 4 7653

0.1

52501

52502

52503

52504

52521

52522

52523

52524

52541

52542

52543

52544

52525

70

50

60

40

30

25

20

15

10

5

5 7 8 9 10 11 12 13 14 16 206


Load

per

isol

ator

(kg)


Exci

tatio

n fre

quen

cy (H

z)

50%60%70%

80%

90% isolation


1 2

3

Issu

e 05

.201

5

COM-5250x / COM-5252x / COM-5254x




1 3 5 7 10 12 15 3 5 7 9 11 1315

1

50%60%70%80%

90% isolation

5

10

15

20

25

3035404550

60

70

55

8090

100110120140160

200

350300

250

400450500

52512

52513

52514

52511

52531

52532

52533

52534

52551

52552

52553

52554

52535


Load

per

isol

ator

(kg)

40

50

353025

20

15

10

5

4

3

2

1


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

COM-5251x / COM-5253x / COM-5255x




Issu

e 05

.201

5

Type

Colour Code*

Min. Load kg

Max. Load kg

Wmm

COM-52160 yellow 10.9 27.2 50.8

COM-52161 red 18.2 45.4 50.8

COM-52162 green 27.2 68.0 50.8

COM-52163 blue 36.3 90.7 50.8

COM-52164 red 36.3 90.7 101.6

COM-52165 green 50.8 127.0 101.6

COM-52166 blue 90.7 226.8 101.6

COM-52167 white 127.0 317.5 101.6


Type

Colour Code*

Min. Load kg

Max. Load kg

COM-52171 red 127.0 317.5

COM-52172 green 181.4 453.6

COM-52173 blue 272.2 680.4

COM-52174 white 453.6 1134.0


Type

Colour Code*

Min. Load kg

Max. Load kg

Hmm

COM-52561 black 272.2 680.4 41.3

COM-52562 red 408.2 1020.6 41.3

COM-52563 green 544.3 1360.8 41.3

COM-52564 grey 725.8 1814.4 41.3

COM-52571 black 272.2 680.4 69.9

COM-52572 red 408.2 1020.6 69.9

COM-52573 green 544.3 1360.8 69.9

COM-52574 grey 725.8 1814.4 69.9


76.2

13010579.4

41

6.35

2x11.2

M12x1.75

M12x1.75

W

11195.273

2x10.338

2.4

14.3

117.5

12795.3 158.8

M12x1.75

94

H

9.5

COM-5256x / COM-5257x

COM-5217x

COM-5216x




100

150

200

250

300

400

500

600

700

800

900

1000

1100

1400

1200

1600

1800

2000

52561

52562

52563

52564

52571

52572

52573

52574

3 5 7 9 11 131511 3 5 7 10 12 15

40

50

353025

20

15

10

5

4

3

2

1

Static deflection (mm)Natural frequency (Hz)

Load

per

isol

ator

(kg)

50%60%70%80%

90% isolation

Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

COM-5256x / 5257x




1.5 2 3 4 517 9 108 11 12 13 14 15


Load

per

isol

ator

(kg)

5

10

15

20

25

3035404550

60

70

55

8090

100110120140160

200

350300

250

400450500

50

45

40

35

30

20

25

10

15

7


Exci

tatio

n fre

quen

cy (H

z)

52160

52161

52165

52166

52167

52162

5216352164

50%60%70%

80%

90% isolation


1 2

3

Issu

e 05

.201

5

COM-5216x




100

150

200

250

300

350

400

450

500

600

700

900

800

1000

1100

1200

52171

3 4 5 6 72

50

45

40

35

30

20

25

10

15

7


Load

per

isol

ator

(kg)

7 9 108 11 12 13 14 15

52172

50%60%70%

80%

90% isolationStatic deflection (mm)

Exci

tatio

n fre

quen

cy (H

z)

52173

52174


1 2

3

Issu

e 05

.201

5

COM-5217x




Issu

e 05

.201

5

Properties Can be installed in all spatial axes

Can be used for shear, compressive and tensile loads Special applications with high-damping silicone possible Shock absorption possible All metal parts galvanised (ROHS compliant) Rubber part made of neoprene (chloroprene rubber) or silicone,

depending on the type Operating temperature range -30 °C to +80 °C

Areas of application Electronic equipment and control units Off-road vehicles Military

The vibration-isolating fasteners (all-attitude mounts) of the AAM product group are mainte-nance-free and ready-to-install isolators that can reduce vibrations and shocks in all directions. The isolation effect is achieved by a special neoprene- or silicone-elastomer.

For applications in which shock absorption is particularly important, the AAMs can also be manufactured with

high-damping silicone. The elements can be installed in all spatial axes. The AAM range is used mainly for

isolating lighter electronic equipment and components.

AAM All Attitude Mounts Vibration-isolating fasteners



AAM – All Attitude Mounts3030

Issu

e 05

.201

5

44.5

6.4

34.9

44.534.9 28.6 38.6

25.4

1.6

4x4.3 1/2” Hex

Type


Max. Load kg

AAM-56423 grey 0.5 1.4

AAM-56424 red 0.8 2.0

AAM-56425 yellow 1.3 3.2

AAM-56426 green 1.8 4.5


Standard material: Silicone

Type


Max. Load kg

AAM-52205 red 1.3 6.8

AAM-52206 green 1.8 11.3

AAM-52207 yellow 2.7 15.9

AAM-52208 blue 4.1 22.7


Standard material: Neoprene, silicone alternatively available

28.7

45.235.9 24.9

18.3

8.9

3.3

2

2x4.5

5

3/8" Hex

AAM-5642x

AAM-5220x




1

150

180

140130120110100

9080

70

60

50

40

35

30

25

20181614

12

10

2

3

4

5

6

7

8

9101112131415

20

25

10 12 14 16 18 20 25 30 35 4011

52205

52206

52207

52208

50%60%70%80%

90% isolation

0.2 0.3 0.4 0.5 1 1.5 20.1


Load

per

isol

ator

(kg)


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

AAM-5220x




0.1

0.2

0.3

0.4

0.5

0.7

0.6

0.80.9

11.11.21.31.41.5

2

2.5

3

4

5

10 12 14 16 18 20 25 30 35 40 50 0.2 0.3 0.4 0.5 1 1.5 211 0.1

56421-30

56421-40

56421-50

56421-60

50%60%70%80%

90% isolation150

180

140130120110100

9080

70

60

50

40

35

30

25

20181614

12

10


Load

per

isol

ator

(kg)


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

AAM-5642x




Issu

e 05

.201

5

Properties Fail-safe Low natural frequency Rugged Versatile Maintenance-free All metal parts galvanised (ROHS compliant) Rubber part made of neoprene (chloroprene rubber) Operating temperature range -30 °C to +80 °C

Areas of application Power generation Off-road vehicles Diesel and marine applications

These rugged, fail-safe isolators of the SFM product group are maintenance-free, ready-to-install machine elements. Neoprene is used as the standard damping material for these extremely effective fasteners.

The isolators are used in marine applications and for diesel generators. The SFMs are available in three sizes for

applications from 20 kg to 1,000 kg. Their longitudinal rigidity is by a factor of 2.5 higher than their vertical rigidity.

The transversal rigidity is by a factor of 0.75 lower than the vertical rigidity. Under maximum load, the SFMs have a

natural frequency of only 8 Hz.

SFM Stable Flex Mounts Stable machine feet



SFM – Stable Flex Mounts3434

Issu

e 05

.201

5

Type

Min. Load kg

Max. Load kg

M Amm

Bmm

Cmm

Dmm

Emm

Fmm

Gmm

Hmm

Imm

SFM-52010-45 20.0 49.9 M12 38.6 20.1 100.1 119.9 59.9 14.2 14.0 10.9 14.0

SFM-52010-55 26.3 65.8 M12 38.6 20.1 100.1 119.9 59.9 14.2 14.0 10.9 14.0

SFM-52010-65 39.9 99.8 M12 38.6 20.1 100.1 119.9 59.9 14.2 14.0 10.9 14.0

SFM-52010-75 48.1 120.2 M12 38.6 20.1 100.1 119.9 59.9 14.2 14.0 10.9 14.0

SFM-52011-45 59.9 149.7 M16 50.0 27.9 140.0 182.9 74.9 13.0 30.0 13.0 20.3

SFM-52011-55 84.4 210.9 M16 50.0 27.9 140.0 182.9 74.9 13.0 30.0 13.0 20.3

SFM-52011-65 119.8 299.4 M16 50.0 27.9 140.0 182.9 74.9 13.0 30.0 13.0 20.3

SFM-52011-75 179.6 449.1 M16 50.0 27.9 140.0 182.9 74.9 13.0 30.0 13.0 20.3

SFM-52012-45 139.7 349.3 M20 72.6 41.9 182.1 228.1 112.0 18.0 34.0 18.0 26.7

SFM-52012-55 207.8 519.4 M20 72.6 41.9 182.1 228.1 112.0 18.0 34.0 18.0 26.7

SFM-52012-65 281.2 703.1 M20 72.6 41.9 182.1 228.1 112.0 18.0 34.0 18.0 26.7

SFM-52012-75 399.2 997.9 M20 72.6 41.9 182.1 228.1 112.0 18.0 34.0 18.0 26.7

I

G

F

H

E

DC

A

B

M

SFM-52010-xx / SFM-52011-xx / SFM-52012-xx




10

15

50

40

30

25

20

15

10

5

20

25

30

40

50

60708090

100

150

200

250

300

400

700

600

500

800

1000

5 6 7 8 9 10 12 1311 14 15 1.5 2 3 4 5 6

1

52010-45

52010-55

52010-65

52010-75

52011-45

52011-55

52011-65

52011-75


Load

per

isol

ator

(kg)

50%60%70%

80%

90% isolationStatic deflection (mm)

Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

SFM-52010 / SFM-52011




10

15

50

40

30

25

20

15

10

5

20

25

30

40

50

60708090

100

150

200

250

300

400

700

600

500

800

1000

5 6 7 8 9 10 12 1311 14 15 1.5 2 3 4 5 6

1

52012-55

52012-65

52012-75

52012-45

50%60%70%

80%

90% isolationNatural frequency (Hz)

Load

per

isol

ator

(kg)


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

SFM-52012




Issu

e 05

.201

5

A

6.35

2x4

31.8

42.735.9 22.916.5

19

0.8

Type


Max. Load kg

Amm

BM-50640 yellow 0.7 1.8 4.3

BM-50641 red 1.2 2.9 4.3

BM-50642 green 2.2 5.0 4.3

BM-50643 blue 2.7 6.8 4.3

BM-50644 white 3.3 8.2 4.3

BM-50680 yellow 0.7 1.8 6.5

BM-50681 red 1.2 2.9 6.5

BM-50682 green 2.2 5.0 6.5

BM-50683 blue 2.7 6.8 6.5

BM-50684 white 3.3 8.2 6.5


BM-5064x BM-5068x

Properties Good shock absorption Low natural frequency Small, light design All metal parts galvanised (ROHS compliant) Rubber part made of neoprene (chloroprene rubber),

silicone available on request Operating temperature range -30 °C to +80 °C

Areas of application Medical technology Computers Electronic equipment Aerospace

The BM low-frequency vibration dampers are used to isolate small devices, electronic components and control units.

BMs are mainly used in vertical compressive stresses under load. They efficiently protect electronic

or medical equipment against damaging vibrations and shocks.

BM Bubble Mounts Low-frequency vibration isolators



BM – Bubble Mounts3838

0.1

6070

50

40

30

25

20

15

10

5

0.4

0.7

1

1.5

2

2.5

3

4

5

7

6

89

10

5 7 8 9 10 11 12 13 14 16 206

5064050680

5064150681

5064250682

5064350683

5064450684

50%60%70%

80%

90% isolation

0.5 1 1.5 2 2.5 3 3.540.1


Load

per

isol

ator

(kg)


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Issu

e 05

.201

5

A

6.35

2x4

31.8

42.735.9 22.916.5

19

0.8

BM-5064x / BM-5068x



BM – Bubble Mounts3939

Issu

e 05

.201

5

Properties Can be installed in all spatial axes

Can be used for shear, compressive and tensile loads Simple design Fail-safe with the use of stop washers All metal parts galvanised (ROHS compliant) Rubber part made of neoprene (chloroprene rubber),

silicone available on request Operating temperature range -30 °C to +80 °C

Areas of application Machinery and equipment Conveying systems Compressors Generators Shipbuilding Construction machines Agricultural machines Off-road vehicles Transport industry

UMOs (universal mounts) are two-part isolators for connecting machines or plants with bordering components, such as cabins or housings.

The UMOs can be installed in any spatial position and effectively decouple two components from each other.

A galvanised metal limiting sleeve is vulcanised into the elastomer cylinders. The UMOs can be used within

the wide temperature range of -30 °C to +80 °C.

UMO Universal Mounts Universal connection isolators



UMO – Universal Mounts4040

Issu

e 05

.201

5

Type

Amm

Bmm

Cmm

Dmm

Emm

Fmm

G1mm

G2mm

Rmm

UMO-60011 - 60015 9.9 19.8 19.0 31.8 12.7 31.8 9.4 0.75

UMO-60021 - 60025 13.5 33.3 31.8 47.5 19.8 49.3 12.7 14.2 1.5

UMO-60031 - 60035 16.3 39.4 38.1 64.3 22.9 62.2 19.1 22.4 2.0

UMO-60041 - 60045 23.9 58.4 57.2 88.9 25.4 73.2 25.4 28.0 3.0

UMO-60051 - 60055 26.9 64.8 63.5 124.0 31.8 85.9 25.4 28.4 3.0

Type

Colour Code* Shore (+5) axialkg

radialkg

feHz

T1Nm

axialkg

radialkg

feHz

T2Nm

UMO-60011 yellow 35 20 10 15 10

UMO-60012 red 45 40 15 15 10

UMO-60013 green 55 65 20 15 10

UMO-60014 blue 65 115 25 15 10

UMO-60015 white 75 140 30 15 10

UMO-60021 yellow 35 30 20 15 13 60 25 12 14

UMO-60022 red 45 55 40 15 13 80 30 12 14

UMO-60023 green 55 75 60 15 13 110 40 12 14

UMO-60024 blue 65 120 80 15 13 175 75 12 14

UMO-60025 white 75 175 130 15 13 285 125 12 14

UMO-60031 yellow 35 40 30 15 19 95 40 11 22

UMO-60032 red 45 70 50 15 19 160 65 11 22

UMO-60033 green 55 105 75 15 19 220 100 11 22

UMO-60034 blue 65 150 110 15 19 390 175 11 22

UMO-60035 white 75 230 165 15 19 600 315 11 22

UMO-60041 yellow 35 70 50 15 25 125 60 10 28.6

UMO-60042 red 45 140 100 15 25 230 105 10 28.6

UMO-60043 green 55 180 140 15 25 350 155 10 28.6

UMO-60044 blue 65 230 180 15 25 530 265 10 28.6

UMO-60045 white 75 365 265 15 25 950 440 10 28.6

UMO-60051 yellow 35 140 70 15 25 515 110 10 32

UMO-60052 red 45 230 100 15 25 875 155 10 32

UMO-60053 green 55 320 140 15 25 1170 275 10 32

UMO-60054 blue 65 410 215 15 25 1600 400 10 32

UMO-60055 white 75 545 300 15 25 2065 640 10 32


Load with plate thickness G1 Load with plate thickness G2

A

D

E

F

C = Mounting hole in flangeR = Required radius

F = Length in installed condition

Axial loadStop plate (optional)

Radial load

BG1/G2

Mounting flange

RC

UMO-600xx



UMO – Universal Mounts4141

Issu

e 05

.201

5

Properties Easy handling Efficient decoupling of housings No special tools necessary Isolates structure-borne noise Fail-safe Resistant to oil and UV radiation Rubber part made of neoprene (chloroprene rubber) Operating temperature range -30 °C to +80 °C

Areas of application Machines and assemblies Tiling, sheets and flanges Attachments to buildings Vehicles and transport industry Construction machines

FLs are removable quick fastening elements for vibration isolation and shock absorption as well as the isolation of structure-borne noise. Their extremely simple design is so selected that only one element can be used to effectively decouple two components from each other by tightening a fastening screw.

Standard metric screws (M3 to M8) can be used to tighten the connecting elements; no additional special

tools are required. The FL elastic fasteners can be fixed via the screw connection into blind holes to connect

panel elements to existing structures, for example. The inner threaded insert serves as an expansion

element for fastening. The EPDM material used is resistant to ozone, oil and most acids. Standard FLs are

available in 5 sizes from M3 to M8.

FL Flex Locs Quick fastening elements



FL – Flex Loc4242

Issu

e 05

.201

5

A

E

L

B

M

C1

Type

Pressurekg

Shearkg

Pressure / Shear kg

M Amm

Bmm

C 1mm

Emm

Lmm

P 2mm

T I 3Nm

T II 4Nm

FL-Q-3 5 2.5 1.0 M3 9 6.7 7.2 0 -0.3 2.5 +0.4 0 11.5 +1

-0.5 0.6 - 2.5 0.4 - 0.5 0.3 - 0.4

FL-Q-4 7 3.5 1.0 M4 12 8.5 9.3 0 -0.3 3.0 +0.4 0 14.5 +1

-0.5 0.8 - 3.3 0.4 - 0.6 0.4 - 0.5

FL-Q-5 10 5.0 1.5 M5 15 9.8 10.2 0 -0.3 3.5 +0.4 0 18.0 +1

-0.5 0.8 - 4.3 0.6 - 1.0 0.5 - 0.6

FL-Q-6 14 7.0 3.0 M6 18 12.0 12.7 0 -0.3 4.0 +0.4 0 21.0 +/-1 1.5 - 5.0 2.3 - 3.5 0.7 - 0.9

FL-Q-8 28 14.0 5.0 M8 24 16.0 16.5 0 -0.5 5.0 +0.4 0 27.0 +/-1 1.5 - 6.5 3.0 - 4.0 1.6 - 1.8

1 Corresponds to mounting hole 2 Sheet thickness 3 Tightening torque T I (Drawing 01) 4 Tightening torque T II (Drawing 02)

Sheet assembly Blind hole assembly

P

FL-Q-x

Sheet assembly Blind hole assemblyDrawing 01 Drawing 02



FL – Flex Loc4343


02

4444

Issu

e 05

.201

5

SLABUniversal Damping Plates For application on foundations for plants and machines, compressors, in pump stations, generators, for insulations, measuring tables, buildings, etc.

CEL Low-Frequency Damping Plates For use in foundations, buildings, transport routes, bridges, stairs, test benches, pump stations, generators, compressors, machines, etc.

PAD Rugged Fibre and Elastomer Plates For isolating and protecting foundations, e.g. of presses, plants, machines, as well as for use in pump stations, crane runways, bridges and heavy-duty applications



Overview4545

Issu

e 05

.201

5

SLAB-720 0.5

CEL-200

CEL-300

1.38

2.07

SLAB-600 0.3

SLAB-450 0.13

SLAB-275 0.055

SLAB-210 0.028

SLAB-170 0.011

1

Recommended application range in N/mm²

1,5 20,50

Vibration-isolation made to measure Variable, flexible, custom-made

Vibration-isolating ACE plates are used whenever an adjusted isolation of vibrations and structure-borne noise is required.

The right damping solution for standard applications can be simply found by using the selection diagrams (following pages).

The right material type can be identified independently of the load via the desired damping in relation to the excitation frequency.

The ideal plate size can be quickly calculated on the basis of the load area.

A rough preselection of suitable plate materials can be made by consulting the permissible surface pressures of different plate

materials.

The SLAB and CEL plates can either be ordered in their standard size or cut according to customer request. We require the desired

specifications and quantities for calculating the required parts.

The custom-cutting of the plates allow the realisation of almost any shape and solution. In addition, various plates can be layered, glued

and combined with reinforcing plates (steel) or sliding layers (PTFE).

The PAD product group is made from fibre-reinforced plate material used for very high loads of up to 13.8 N/mm².

Application range according to surface pressure



Introduction4646

Issu

e 05

.201

5

Properties Can be cut to many different shapes (water jet cutting) Can be combined to any desired isolation packages On-site vibration measurement and selection Special dimensioning software, no additional costs for designing Highly damping PUR Operating temperature range -30 °C to +70 °C

Areas of application Foundations of plants and machines Compressors Pump stations and generators Pipeline isolation Test benches, measuring tables and their foundations Buildings Staircase bearing surfaces

SLAB damping plates of model series SL-170 to SL-720 are universally applicable elastic PUR materials which are manufactured according to a patented formula and can be used for a large number of applications.

SLAB Universal Damping Plates

The plates with standard sizes of 170 kg/m³ to 720 kg/m³ serve as

starting materials for the vibration isolation of different applica-

tions in industry and construction. The static and dynamic product

properties are used as the basis for the selection of the most

suitable damping solution.

The material determination (see selection diagram) is used to

make the preselection of the correct damping material, after

which, in a second, easy step, the suitable dimensions of the

support are determined. SLABs are delivered as pre-fabricated

standard plates or can be freely cut from the raw material (roll

and plate material).

Standard SLABs are supplied in material thickness of 12.5 mm

and 25 mm. On request, the sizes of delivered plates can be cut

freely from the standard 800 x 1,500 mm stock. Sample plates

with dimensions 220 x 150 mm and the respective thicknesses

are available for test purposes and small applications, with

maximum machinable dimensions up to 5,000 x 1,500.



SLAB – Universal Damping Plates4747

0

180

0

40

20

80

120

160

60

100

140

60

10 2015 25 30 454035 50 0.40.2 0.6 0.8 1 1.2 1.4 1.6 1.8 2

0

Exci

tatio

n fre

quen

cy (H

z)Lo

ad (N

/mm

²) x

0.0

01

Natural frequency (Hz) Static deflection (mm)

50%60%

70%

80%

90% isolation

SL-275-25

SL-210-12

SL-210-25SL-170-25

SL-170-12

SL-275-12

Static load limit SL-275



20

35

45

50

55

40

30

25

5

15

10

1 2


Standard coloursSL-170: YellowSL-210: BlueSL-275: Green

Standard thicknessesSL-xxx-12: 12.5 mmSL-xxx-25: 25 mm

3

Issu

e 05

.201

5

SL-170 / SL-210 / SL-275




0

180

0

40

20

80

120

160

60

100

140

20

35

45

50

55

40

30

25

5

15

10

60

10 2015 25 30 454035 50 0.2 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3

0

Exci

tatio

n fre

quen

cy (H

z)Lo

ad (N

/mm

²) x

0.0

1

Natural frequency (Hz) Static deflection (mm)

50%60%

70%

80%

90% isolation

SL-720-25SL-600-12

SL-600-25SL-450-25

SL-450-12

SL-720-12




1 2


Standard coloursSL-450: OrangeSL-600: Dark blueSL-720: Black

Standard thicknessesSL-xxx-12: 12.5 mmSL-xxx-25: 25 mm

3

Issu

e 05

.201

5

SL-450 / SL-600 / SL-720




Issu

e 05

.201

5

Properties Can be combined to form any desired isolation packages or glued together On-site vibration measurement and selection Special dimensioning software, no additional costs for designing Operating temperature range -20 °C to +65 °C

Areas of application Foundations of plants and machines Compressors Pump stations and generators Pipeline isolation Test benches, measuring tables and their foundations Buildings Transport routes, bridges Staircase bearing surfaces

CEL damping plates are produced from a special nitrile rubber which damps at low-frequencies.

The damping plates can be custom-cut and glued together to form multiple layers depending

on the application. The tried-and-tested CEL damping plates are used in the field of machine

and plant engineering. Here the plates take charge of isolating the floor or foundation to the

plant or machine. Damaging vibrations are prevented, increasing production or measuring

quality.

CEL Low-Frequency Damping Plates



CEL – Low-Frequency Damping Plates5050

0

250

0

50

100

150

200

0.5

1.0

1.5

2.0

2.5

10 20 30 40 50 60 1 2 3 4 5 6 7 8 9 10

0

CEL-200-4 CEL-200-2 CEL-200-1

CEL-300-4 CEL-300-2 CEL-300-1 Static load limit CEL-300

Static load limit CEL-200CEL-

200-1 CEL-200-2 CEL-200-4

CEL-300-1 CEL-300-2 CEL-300-4

Load

per

isol

ator

(kg)


50%60%70%

80%

90% isolation


Exci

tatio

n fre

quen

cy (H

z)


1 2

3

Standard thicknessesCEL-xxx-1: 12.7 mmCEL-xxx-2: 25.4 mmCEL-xxx-4: 50.8 mm

Issu

e 05

.201

5

CEL-200 / CEL-300



CEL – Low-Frequency Damping Plates5151

Issu

e 05

.201

5

Properties Rugged Can be custom-cut Low creep tendency Thickness: 1,185 kg/m³ Operating temperature range -55 °C to +95 °C

Areas of application Foundations of presses, plants and machines Impact plates Pipelines Conveying systems Pump stations and generators Crane runways Bridges Heavy-duty applications

The PAD fibre and Elastomer Plates combine the positive properties of isolating elastomer bearing surfaces with the reinforcing effect of fibre inlays.

The PADs are rugged damping plate for use in heavy-duty applications, e.g. under crane runways, in steel

construction, pipeline construction and the coal, iron and steel industry. Due to their physical properties,

the PAD plates provide outstanding damping against shocks and impacts and isolate vibrations and

structure-borne noise.

Depending on the shape and selected dimensions, PADs can withstand compressive loads of up to

69 N/mm². In general, the maximum surface pressure is 13.8 N/mm².

PAD Rugged Fibre and Elastomer Plates



PAD – Rugged Fibre and Elastomer Plates5252

Issu

e 05

.201

5

Due to the layered structure, the material exhibits excellent compressibility.

This allows spring deflections to be reached without material flow (custom-fit

installation complying with defined dimensions possible). The excellent

material properties are also apparent in the very good creep behaviour under

load. For example, under continuous static load, the material only exhibits a

creep tendency of approx. 5%.

Depending on the application, the PADs can be custom-cut to meet customer

specifications and be used as supports, discs and sleeves with an isolating/

damping effect.

Selection and calculation

As with a conventional shock absorption application, the

selection of a suitable material thickness and material dimensions

is based on the consideration of the kinetic energy in the system

in relation to the desired damping value. The hysteresis curve for

the respective material is then taken as the basis for selecting the

correct material dimensions, such as the length, width and height

of the damper.

To measure the kinetic energy, we suggest you to try our shock

absorption calculation software which we offer on our website

free of charge. No need even to register, you can easily enter the

required values here and obtain a suitable solution recommenda-

tion.

Our in-house and field application technicians are happy to assist you with this as with other issues.

Note

PADs consist of organic material subject to batch-based fluctuations

PADs meet the following military specifications: MIL-C-882 and MIL-E-5272A.

The PADs are resistant to most oils, water vapour, water, mould and brine. Their operating temperature range is between -55 °C and +95 °C.

The hardness of PADs is 90 ±5 shore A.

The standard plates are available in different thicknesses, graduated between 1.6 and 25.4 mm. Other thicknesses are available by combining the standard thicknesses via gluing. A combination with steel plates or PTFE plates as equal layers is also available on request.



PAD – Rugged Fibre and Elastomer Plates5353

03Low-Frequency Air Spring Elements

5454

Issu

e 05

.201

5

PLMPneumatic Air Spring Elements For an efficient isolation of measuring equipment, high-speed presses and machines.

PAL Air Spring Elements with Automatic Level Controls Isolation against disruptive vibrations and level-adjustment for test and measuring equipment. Isolating at extremely low-frequencies, these components are used in the automotive industry and in aerospace engineering.



Overview5555

Issu

e 05

.201

5

When used as a vibration damper, the internal air

chamber already guarantees a significant isolating

effect from 5 Hz upwards. In an optimally loaded

condition, the natural frequency is 3.0 Hz. PLM air

spring elements also isolate in a pressure-free state.

Properties Low natural frequency of 3 Hz Easy level control via integrated valve Height regulation control on request Ratio of horizontal to vertical

natural frequency 1:1

Areas of application Measuring tables Test benches High-speed presses Production plants

PLM air spring elements offer low-frequency vibration and shock isolation for measuring stations, coordinate measuring machines, fans, air compressors, motor and generator units, high-speed presses and more.

The PLM air spring series comprises low-frequency vibration and shock isolators which reduce undesirable vibrations while simultaneously levelling the supported devices.

PLM Air Spring Elements

The vertical natural frequency of the elastomer body is approximately 10 Hz,

meaning that disturbances above 14 Hz are isolated.

The ratio of vertical to horizontal natural frequency is roughly 1:1 with high

horizontal stability.

For applications with shock or impact loads, the elastomer wall design of the

PLM air springs offer high dynamic spring deflection. If one wishes simultane-

ously to retain the low natural frequency of 3 Hz, the use of external arrestors

is recommended in order to prevent the air springs from breaking through.

The PLM design features a vulcanised thread insert, by means of which the air

springs can be inflated either with a standard tyre valve or a pneumatic fitting.

Special connections are not necessary.

The isolators are delivered with a valve. They are inflated and levelled manually

with the aid of hand pumps or adaptors connected to an air supply. If a com-

pressed air fitting is mounted on the air springs, they can be connected to the

controlled air supply system. This facilitates the pressurisation and the level

control. In the event that no level control valve is used, a control unit can be

provided to regulate the pressure and the height of the air springs linked to

each other.

In addition, the PLM air spring elements can be supplied with automatic level

control valves for height regulation. Each master isolator has a built-in level

control valve which functions as a load detector and position sensor.



PLM – Air Spring Elements5656

Issu

e 05

.201

5

A

B

A B

H

I

G

MxE

F

C

Type

Amm

B mm

Cmm

M Emm

Fmm

Gmm

Hmm

Imm

Max. Load kg

PLM 1 76 60.5 6.9 M10 12.0 73 25 65 3.2 45

PLM 3 106 89 6.9 M12 13.5 105 56 65 3.2 135

PLM 6 130 108 7.4 M12 13.5 127 60 90 3.2 250

PLM 12 175 152 7.4 M12 13.5 171 100 90 3.2 550

PLM 24 254 216 14.2 M16 19.0 245 138 90 4.8 1100

PLM 48 343 305 14.2 M16 19.0 338 190 90 4.8 2200

PLM 96 470 406 20.6 M24 22.4 468 267 90 6.4 4400

PLM 192 610 508 20.6 M24 22.4 610 400 90 6.4 8800

PLM

Note

When commissioning, please ensure that pressure is first applied on the PLM air spring elements before they are filled to the desired operating pressure (max. 5 bar for sizes 1 and 3; max. 6 bar for the remaining sizes) using the valve.

A separate usable control unit can be used to check the operating condition and adjust to the desired amount.

Any number of parallel air springs can be added in order to increase the

loading capacity of the overall system.

Selection and calculation

The best isolation values can be achieved for the use of PLM air springs when

the maximum load of the individual air spring elements is utilised to the fullest

extent possible.

In standard applications, it is sufficient to select PLM air spring elements on

the basis of the weight of the machine or plant to be isolated. If the maximum

isolation effect is to be realised, additional weights (steel or e.g. granite

plates) may have to be added so as to achieve the maximum permitted load

range and thus the ideal isolation effect.

Our technicians are happy to assist you in the selection process and provide any support you require.



PLM – Air Spring Elements5757

Issu

e 05

.201

5

PAL Air Spring Elements with Automatic Level Controls

Air spring elements of the PAL series offer superior low-frequency vibration isolation for measuring devices, electron microscopes, MRT equipment, coordinate measuring machines and precision manufacturing machines.

PAL air spring systems use level-controlled air springs. These isolators are ideal for

conditions which require a constant level and vibration isolation at the same time.

The PAL isolators meet all important requirements for measuring devices, electron

microscopes, measuring stations and precision manufacturing machines.

Standard PAL isolators have a natural frequency of up to 1.7 Hz – depending on

the height of the isolator. Even lower natural frequencies (up to 0.5 Hz) are possible

for isolators manufactured according to customer specifications.



PAL – Air Spring Elements with Automatic Level Control5858

Issu

e 05

.201

5

Properties Height-adjustable Low-frequency isolation, natural frequencies of up to 0.5 Hz possible

Areas of application Test and measuring equipment Aircraft and automotive test benches Foundation bearing surfaces




Issu

e 05

.201

5

A complete PAL system consists of at least three

master isolators for a 3-point level control. Each

isolator has a built-in level control valve which

functions as a load detector and height control. Any

number of slave isolators can be added in order to

bear the overall weight of the equipment.

The scope of supply of a system contains a control

unit, automatic level control valves, pneumatic lines

and all the additional pneumatic accessories required

for a complete system installation.

PAL air springs react quickly to changes in load or

balance, with deviations from a preset position being

automatically readjusted.

The performance of an air spring system is always a

compromise between natural frequency (isolation),

the resetting accuracy of the level control valve and

the control setting time.

The control setting time is defined as the time

required by the isolation system to reach a preset

reference value again after a defined disturbance.

The disturbance can be caused by environmental factors or inherent machine

forces, such as the movement of the measuring bridge of a measuring

machine.

The control setting time is minimised with an optimal damping effect and an

adequate flow through the valve. Long control setting times are not accept-

able for air springs, as this can induce errors in repeat accuracy in the case of

precision measuring devices and positioning machines as well as lower part

throughput rates.

Depending on the application, ACE offers many different level control valves.

The decisive variables for designing an acceptable solution are the valve

flow-through and rigidity, as well as accuracy characteristics. Reset accura-

cies of +/- 0.15 mm or +/ 0.025 mm are available. The valve flow-through and

rigidity are selected on the basis of the air spring design and the damping.

Extremely low-frequency-calibrated precision isolators for use in high-resolution measuring and testing systems.

PAL-18 to PAL-1000 Large size

PAL-3 to PAL-9 Small size

PAL-5.5-2.5 with level control valve PALV 5-5

The figures are not to the same scale.




Issu

e 05

.201

5

Type

D1mm

D2mm

H (pressureless)mm

H (Max. Stroke)mm

Lmm

Max. Load*kg

Special design only on request

PAL 18-6 165 152 153 160 234 800

PAL 21-6 200 150 153 163 270 950

PAL 21-12 200 200 305 315 270 950

PAL 36-6 220 190 153 163 290 1630

PAL 55-6 260 230 153 163 330 2500

PAL 55-12 260 260 305 315 330 2500

PAL 75-6 300 265 153 163 370 3400

PAL 133-6 380 350 153 163 450 6030

PAL 133-12 380 380 305 315 450 6030

PAL 255-6 530 470 153 165 600 11 560

PAL 255-12 530 460 305 317 600 11 560

PAL 416-8 640 585 203 215 710 18 200

PAL 1000-6 950 910 153 178 1020 42 000

PAL 1000-18 914 914 450 475 990 42 000

PAL 3-2.5 80 80 64 70 157 126

PAL 5.5-2.5 100 100 64 70 177 238

PAL 9-4 130 130 94 98 207 385

PAL 9-6 130 130 153 159 221 385

* At a maximum operating pressure of 7 bar

Natural frequencyPAL xx-6

HzPal xx-12

Hz

vertical 2.5 - 2.7 1.5 - 1.7

horizontal 2.0 - 4.5 2.0 - 4.5

DampingPAL xx-6

%Pal xx-12

%

vertical (adjustable) 6 - 20 6 - 20

horizontal 5 - 6 5 - 6

ATTENTIONREMOVESHIPPINGSCREWS

D1

D2

H

(D1)

L

PAL

Isolation properties

Note

The maximum permissible horizontal movement of the PAL air spring elements can be limited to 3 mm, if necessary.




Issu

e 05

.201

5

Design service and analysis

Low-frequency vibrations and strong shocks and force

peaks influence the accuracy, production quality and

productivity of high-performance and precision

machinery.

The specifications for the maximum permissible

accelerations and vibrations are often prescribed by

the manufacturers of testing, measuring and

production machines. Our expert team is happy to

assist you with analysing the site conditions and

selecting the right isolators for complying with the

required system parameters.

On request, we execute highly precise measurements

on site and document the respective target and actual

conditions or develop suitable system solutions with

our customers. Requirements and solution models

may vary widely from case to case.

Our technicians are happy to assist you in the selection process and provide any support you require.

Application examples

Measuring tables, example: coordinate measuring machine

Test benches, example: street simulation test bench




Issu

e 05

.201

5

Structure

PAL Air Spring Elements with Automatic Level Control

Damping chamber

Level control valve

Piston

Membrane Spring chamber




Issu

e 05

.201

5

ARGENTINA CAMOZZI NEUMATICA S.A.

Prof. Dr. Pedro Chutro 3048 1437 Buenos Aires, Argentina Tel.: +54-11 49110816 Fax: +54-11 49124191 www.camozzi.com.ar

ALTA TECNOLOGIA HIDRAULICA S.A. Velez Sarsfield 1321 B1824ACK Lanus oeste Buenos Aires, Argentina Tel.: +54-11-4249-5770 Fax: +54-11-4247-7238 www.hidromec-hidraulica.com.ar

AUSTRIA ACE STOSSDÄMPFER GMBH

Albert-Einstein-Straße 15, 40764 Langenfeld Germany Tel.: +49-2173-9226-4000 Fax: +49-2173-9226-29 www.ace-ace.de (distributors on request)

BELARUS BIBUS (BY) COOO

8th Per. Ilyicha 13a, office 2.1 246013 Gomel, Belarus Tel.: +375-232 39 09 02 Fax: +375-232 37 10 01 www.bibus.by (not distributor for gas springs and HB dampers)

For gas springs & HB dampers please contact:

ACE STOSSDÄMPFER GMBH Albert-Einstein-Straße 15, 40764 Langenfeld Germany Tel.: +49-2173-9226-4100 Fax: +49-2173-9226-89 www.ace-ace.com

BELGIUM ACE STOSSDÄMPFER GMBH

Albert-Einstein-Straße 15, 40764 Langenfeld Germany Tel.: +32-(0)11-960736 Fax: +32-(0)11-960737 www.ace-ace.com (distributors on request)

BOSNIA BIBUS DOO

Karadordeva bb, 76311 Dvorovi – Bijelijna Bosnia and Herzegovina Tel.: +387-55 423 444 Fax: +387-55 423 444 www.bibus.ba (not distributor for gas springs and HB dampers)



BRAZIL OBR EQUIPAMENTOS

INDUSTRIAIS LTDA. Rua Piratuba, 1573, Bom Retiro Joinville-SC (South Brazil) CEP 89.222-365, Brazil Tel.: +55-0800 704 3698 / 47 3435 44 64 Fax: +55-47 3425 90 30 www.obr.com.br

FRANCE BIBUS FRANCE

ZI du Chapotin, 233 rue des frères Voisin 69970 Chaponnay, France Tel.: +33-4 78 96 80 00 Fax: +33-4 78 96 80 01 www.bibusfrance.fr (not distributor for gas springs and HB dampers)



GREECE PNEUMATEC INDUSTRIAL

AUTOMATION SYSTEMS 91 Spirou Patsi Street, Athens 11855, Greece Tel.: +302-1 03412101 / 3413930 Fax: +302-1 03413930

HUNGARY BIBUS KFT.

1103 Budapest, Ujhegyi ut 2, Hungary Tel.: +36-1265 27 33 Fax: +36-1264 89 00 www.bibus.hu (not distributor for gas springs and HB dampers)

Gas spring & HB damper specialists:

DUNA CONSULTING KFT. Gábor Áron u. 18.2013 Pomáz, HungaryTel.: +36-1 433 4700, +36-30 26 36 576Fax: +36-1 264 8900 www.acegazrugo.hu

IRELAND IRISH PNEUMATIC SERVICES LTD.

5A M7 Business Park Newhall, Naas, Co. Kildare, Ireland Tel.: +353-45-872590 Fax: +353-45-872595 www.irishpneumaticservices.com

ISRAEL ILAN & GAVISH

AUTOMATION SERVICE LTD. 24, Shenkar Street, Qiryat-arie 49513 PO Box 10118, Petha-Tiqva 49001, Israel Tel.: +972-39 22 18 24 Fax: +972-39 24 07 61 www.ilan-gavish.co.il

ITALY R.T.I. S.R.L.

Via Chambery 93/107V, 10142 Torino, Italy Tel.: +39-011-70 00 53 / 70 02 32 Fax: +39-011-70 01 41 www.rti-to.it

JORDAN ATAFAWOK TRADING EST.

PO Box 921797, Amman 11192, Jordan Tel.: +962-64 02 38 73 Fax: +962-65 92 63 25

LITHUANIA TECHVITAS

Dubysos g. 66A, 94107 Klaipeda, Lithuania Tel.: +370-46 355 494 Fax: +370-46 355 493 www.techvitas.lt

BULGARIA BIBUS BULGARIA LTD.

Tzvetan Lazarov Blv. 2, floor 2, 1574 Sofia, Bulgaria Tel.: +359-297 19 80 8 Fax: +359-292 73 26 4 www.bibus.bg (not distributor for gas springs and HB dampers)



CHILE TAYLOR AUTOMATIZACION S.A.

A.V. Vicuna Mackenna, # 1589 Santiago, Chile Tel.: +56-25 55 15 16 Fax: +56-25 44 19 65 www.taylorautomatizacion.cl

CROATIA BIBUS ZAGREB D.O.O.

Anina 91, 10000 Zagreb, Croatia Tel.: +385-1 3818 004 Fax: +385-1 3818 005 www.bibus.hr (not distributor for gas springs and HB dampers)



CZECH REPUBLIC BIBUS S.R.O.

Videnska 125, 639 27 Brno, Czech Republic Tel.: +420-547 125 300 Fax: +420-547 125 310 www.bibus.cz (not distributor for gas springs and HB dampers)


MN–SYSTEMS, S.R.O. Na Honech I/5538, 760 05 Zlín, Czech RepublicTel.: +420-734 200 172Fax: +420-246 013 198 www.mnsystems.cz

DENMARK AVN AUTOMATION A/S

Bergsoesvej 14, 8600 Silkeborg, Denmark Tel.: +45-70 20 04 11 Fax: +45-86 80 55 88 www.avn.dk

FINLAND NESTEPAINE OY

Makituvantie 11, 01510 Vantaa, Finland Tel.: +358-20 765 165 Fax: +358-20 765 7666 www.nestepaine.fi

MOVETEC OY Hannuksentie 1, 02270 Espoo, FinlandTel.: +358-9 5259 230Fax: +358-9 5259 2333 www.movetec.fi


Distributors Worldwide

in Countries without ACE Facility6464

Issu

e 05

.201

5

LUXEMBOURG ACE STOSSDÄMPFER GMBH


NETHERLANDS ACE STOSSDÄMPFER GMBH


NORWAY OLAER AS.

Dynamitveien 23, Postboks 133, 1401 Ski, Norway Tel.: +47-64 91 11 80 Fax: +47-64 91 11 81 www.olaer.no

HYDNET AB Turebergsvagen 5, 191 47 Sollentuna, Sweden Tel.: +46-8 59 470 470 Fax: +46-8 59 470 479 www.hydnet.se

PAKISTAN J.J. HYDRAULICS & PNEUMATICS

Hotel Metropole Bldg., Room 127, 1st Floor Club Road, Karachi, Pakistan 75520 Tel.: +92-2 15 66 10 63 Fax: +92-2 15 66 10 65

POLAND BIBUS MENOS SP. Z.O.O.

ul. Spadochroniarzy 18, 80-298 Gdańsk, Poland Tel.: +48-58 660 95 70 Fax: +48-58 661 71 32 www.bibusmenos.pl (not distributor for gas springs and HB dampers)


F.H.U. ELMATIC S.C. ul. Lubicka 20, 87-100 Toruń, Poland Tel.: +48-56 659 15 49 Tel./Fax: +48-56 659 16 81 www.elmatic.com.pl

PORTUGAL AIRCONTROL INDUSTRIAL S.L.

Alameda Fernao Lopes 31A Torre 2 - Miraflores 1495-136 Alges (Lisboa), Portugal Tel.: +351-21 410 12 57 Fax: +351-21 410 56 08 www.aircontrol.es

BIBUS PORTUGAL LDA Rua 5 de Outubro, 5026 4465-079 S. Mamede de Infesta, Porto, Portugal Tel.: +35-122 906 50 50 Fax: +35-122 906 50 53 www.bibus.pt (not distributor for gas springs and HB dampers)

ROMANIA BIBUS SES S.R.L.

134/1 Calea Lugojului, 307200 Ghiroda, Timis, Romania Tel.: +40-356 446 500 Fax: +40-356 446 660 www.bibus.ro (not distributor for gas springs and HB dampers)


D.C. COMPANY S.R.L. Dragos Voda nr. 43, 300351 Timisoara, Romania Tel.: +40-722 145 213 Fax: +40-356 800 513 www.ewarehouse.ro

RUSSIA BIBUS O.O.O.

Izmailovsky prospect 2, letter A 190005 St. Petersburg, Russia Tel.: +7-812 251 62 71 Fax: +7-812 251 90 14 www.bibus.ru (not distributor for gas springs and HB dampers)


TEHINNOVATION Krasnodonskaya street 19, office 17 109386 Moscow, Russia Tel.: +7-495 222 06 01 Fax: +7-499 786 42 56 www.tehinnovation.ru

SERBIA BIBUS DOO

Karadordeva bb, 76311 Dvorovi – Bijelijna Bosnia and Herzegovina Tel.: +387-55 423 444 Fax: +387-55 423 444 www.bibus.ba (not distributor for gas springs and HB dampers)



SLOVAKIA BIBUS SK S.R.O.

Trnavska cesta, 94901 Nitra, Slovakia Tel.: +421-37 7777 950 Fax: +421-37 7777 969 www.bibus.sk (not distributor for gas springs and HB dampers)


PNEUTRADE S.R.O Rybárska 8, 949 01 Nitra, Slovakia Tel.: +421-37/65 24 338 Fax: +421-37/65 55 933 www.pneutrade.sk

SLOVENIA INOTEH D.O.O.

K Zeleznici 7, 2345 Bistrica ob Dravi, Slovenia Tel.: +386-02 665 1131 Fax: +386-02 665 2081 www.inoteh.si (not distributor for gas springs and HB dampers)



SOUTH AFRICA PNEUMARK CONTROLS

94A Crompton Street, Pinetown, 3610 South Africa Tel.: +27-31 701 0421 Fax: +27-86 551 2026 www.pneumark.co.za

SPAIN AIRCONTROL INDUSTRIAL S.L.

Paseo Sarroeta 4 20014 Donostia-San Sebastian, Spain Tel.: +34-943 44 50 80 Fax: +34-943 44 51 53 www.aircontrol.es

BIBUS SPAIN S.L. Avda Ricardo Mella, 117 D, 36330 Vigo, Spain Tel.: +34-986 24 72 86 Fax: +34-986 20 92 47 www.bibus.es(not distributor for gas springs and HB dampers)

SWEDEN HYDNET AB

Turebergsvagen 5, 191 47 Sollentuna, Sweden Tel.: +46-8 59 470 470 Fax: +46-8 59 470 479 www.hydnet.se

SWITZERLAND BIBUS AG

Allmendstrasse 26, 8320 Fehraltorf, Switzerland Tel.: +41-44-877 50 11 Fax: +41-44-877 58 51 www.bibus.ch (not distributor for gas springs and HB dampers)



TURKEY BIBUS OTOMASYON SAN. VE Tic. LTD. STI.

Necatibey Cad. No:49 Kat:2 34425 Karakoy/Istanbul, Turkey Tel.: +90-212 293 82 00 Fax: +90-212 249 88 34 www.bibus.com.tr (not distributor for gas springs and HB dampers)


POVVER PNÖMATIK A.S. Necatibey Cad. No:44 Kat:234425 Karaköy/Istanbul, TurkeyTel.: +90-212 2938870Fax: +90-212 2936877 www.powerpnomatik.com

UKRAINE BIBUS UKRAINE TOV

Mashinobudivnykiv Str., 5A Chabany, 08162 Kiev Region, Ukraine Tel.: +380-44 545 44 04 Fax: +380-44 545 54 83 www.bibus.com.ua (not distributor for gas springs and HB dampers)




Distributors Worldwide

in Countries without ACE Facility6565

Issu

e 05

.201

5

Calculation sheet for your applications

We would be happy to send you a design proposal for your application. In order to obtain a better picture of your application before establish-ing contact, we would like to ask you to send us the following basic information.

Please send us a sketch or drawing so that our application technicians understand the case. For the drawing, please use the designated field or send us a dimensioned sketch with a copy of the calculation sheet to [email protected]. You can also simply use our calculation sheet at www.aceolator.eu.

Project designation

Description of the application

Excitation frequency / speed Hz or 1/s

Weight of system in kg

Weight distribution centric (please indicate in sketch) excentric (please indicate in sketch)

Machine dimensions (mm) length width height

Number of support points (quantity)

Dimensions of the support points (mm) length width diameter

Desired degree of isolation 50% (basic isolation) 60% 70% 80% 90% (very good isolation)

Environmental influences media temperature misc

Need / year (quantity)

Please enter the technical data for the calculation here

Contact Details

Company

Name

Department

Street/PO Box

Postcode/City

Country

Telephone

E-Mail

Please copy, complete and fax to ACE +49 (0)2173 -9226 -89or use our Calculation Form on Website www.aceolator.eu Box for your sketch

Sketch

Fax your inquiry form to +49 (0)2173 - 9226 - 89

This service is free of charge for you


6666

www.aceolator.eu

ACEolatorIsolates Undesired Vibrations

JAPAN ACE CONTROLS JAPAN L.L.C.

City Center Bldg. II 2fl, 3-1-42, Chigasaki-minami, Tsuzuki-ku Yokohama, 224-0037, Japan T +81 45 - 945 - 0123 F +81 45 - 945 - 0122 www.acecontrols.co.jp

GERMANY ACE STOSSDÄMPFER GMBH

Albert-Einstein-Straße 15 40764 Langenfeld, Germany T +49 (0) 2173 - 9226 - 10 F +49 (0) 2173 - 9226 - 19 www.ace-ace.de

GREAT BRITAIN ACE CONTROLS INTERNATIONAL

Unit 404 Easter Park, Haydock Lane Haydock, WA11 9TH, U.K. T +44 (0)1942 - 727 440 F +44 (0)1942 - 717 273 www.ace-controls.co.uk

USA ACE CONTROLS INTERNATIONAL INC.

23435 Industrial Park Dr., Farmington Hills Michigan 48335, USA T +1 248 - 476 0213 F +1 248 - 476 2470 www.acecontrols.com

CHINA ACE CONTROLS (SUZHOU) CO. LTD.

Building 7 East, No. 369 Lushan Road, Suzhou Jiangsu Province 215129, P.R. China T +86 512 - 8860 6699 F +86 512 - 8860 6698 www.acecontrols.cn.com

Sales Locations

aceolator - ace-ace.de€¦ · hydraulic dampers, hydraulic feed controls, rotary dampers, tubus...

Documents