acf.cw.la3.s06.1
DESCRIPTION
TRANSCRIPT
ACF.CW.LA3.S06.1
LEMBAGA PEPERIKSAAN MALAYSIAKEMENTERIAN PELAJARAN MALAYSIA
ASSESSMENT CHECKLIST FORM
LEARNING AREA : COMPUTER NETWORKS AND COMMUNICATIONS
Name of Candidate
IC No
Index No
Construct : S06 Network Facilities Setup
Aspect : LA3.S06.1 Crimp and Test UTP Cables
Instrument : Demonstration
Assessment : 1 / 2 / 3 / _
No. Criterion
Evidence
(to be filled by candidate if necessary)
Assessor tick () if completed
Remarks by assessor
1 Crimp a Straight Cablea. Skin off the cable jacket.b. Untwist and straighten each wire.c. Arrange the wires according to the 568B
wiring schematic order for both ends.d. Cut and insert the wires into a RJ45
connector.e. Crimp the cable using a crimping tool.
2. Check the straight cable is crimped successfully using a cable tester.
3. Crimp a Crossed Cablea. Skin off the cable jacket.b. Untwist and straighten each wire.c. Arrange the wires according to the 568A
wiring schematic order for one end AND 568B wiring schematic order for the other end.
d. Cut and insert the wires into a RJ45 connector.
e. Crimp the cable using a crimping tool.
4. Check the crossed cable is crimped successfully using a cable tester.
SCORE
Candidate’s Signature
------------------------------
Assessor’s Signature
----------------------------------
Name :
Date :