acoustac 1 | legend

19
Bottom Weight Example 3W15 = 3” stacker depth 15” segment 1 panel 6W11 MB2 = 6” stacker depth 11” segment 2 fabric panels Lifting Channel Stacker Fabric Segment Stainless Steel Bands Machine Frame Infill (without logo) Aluminum Frame Trim Frame Clip Rail acouStac Components MODEL NUMBER EXPLANATION Banner [ ] W [ ] - [ ] Custom Options: MB2 = 2 fabric panels Fabric Segment Height 11” or 15” Fabric Panel Machine Frame W = 550 g/m 2 (29oz.) DFR Wool Stacker Depth 3” or 6” ® 704 E.133rd St. Bronx, NY 10454 T e l 7 1 8 . 4 0 2 . 2 6 7 7 www.acouStaCorp.com 2014 ® 1 | LEGEND acouStac ®

Upload: others

Post on 23-Feb-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Bottom Weight

Example 3W15 = 3” stacker depth 15” segment 1 panel

6W11 MB2 = 6” stacker depth 11” segment 2 fabric panels

Lifting Channel

Stacker

Fabric Segment

Stainless Steel Bands

Machine Frame Infill(without logo)

Aluminum Frame

Trim Frame

Clip

Rail

acouStac Components

MODEL NUMBER EXPLANATION

Banner

[ ] W [ ] - [ ]Custom Options:MB2 = 2 fabric panels

Fabric Segment Height 11” or 15”

FabricPanel

MachineFrame

W = 550 g/m2 (29oz.) DFR Wool

Stacker Depth3” or 6”

®

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

1 | LEGENDacouStac®

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

2 | PRODUCT DESCRIPTIONacouStac®

The acouStac® Variable Acoustic Banner is a motorized retractable banner that is used to control the acoustic reverberation time of a room.

acouStac® Fabric PanelThe fabric panel consists of two parallel surfaces, front and rear, made up of individual horizontal segments held together by stackers. Each stacker consists of two aluminum rails held apart by a series of clips. The stackers separate the front and rear surfaces at a fixed dimension (depth) over the full height and width of the fabric panel. The fabric chambers are 3” (7.6cm) or 6” (15.2cm) deep (formed by the stackers) and 11” (28cm) or 15” (38cm) tall (formed by the fabric segments).

Multiple fabric panels can operate from one machine using custom machine & configurations.

The fabric is 550 g/m2 (29oz) DFR Wool Serge; available in standard or custom colors.

Standard fabric panel size is up to 20ft (6.1m) wide and 20ft (6.1m) tall.

Custom sizes are available using custom machines and configurations.

The 6” (15cm) stackers provide greater acoustic absorption and add 3” (7.6cm) to the overall fabric panel depth.

The acouStac® Fabric Panel is certified by an independent laboratory insuring that it has been testedin accordance with the “Sound Absorption Coefficient by Reverberation Room Method” (ASTM C423-07).

Control Systems - refer to the acouTroL section for additional details• acouTroL Cambia - a simple push button controller for basic up/down operation.• acouTroL Accent - a push button controller allowing for (4) user settable preset positions for each banner.• acouTroL Symphony - a more sophisticated controller with a touchscreen for larger installations allowing group operation of banners and multiple preset ‘looks’.

acouStac® banners ship fully assembled and tested.

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

3 I GLOSSARY acouStac®

acouStac® BannerA complete motorized system consisting of retracting fabric panel and machine.

BandFlat stainless steel bands attached to the lifting channel. Bands wrap on the drum in “yo-yo” fashion.

Band ClampDevice that secures a band to the lifting channel.

Bottom Weight3” (7.6cm) or 6” (15.2cm) rectangular tube at bottom of fabric panel fitted with plastic end caps.

ClipPlastic clip that is used to connect two rails. Available 3” (7.6cm) or 6” (15.2cm) deep.

ControllerA remote cabinet with push buttons, a touch screen, or other interface including a key on/off switch and emergency stop.

DrumYo-yo style drums spool bands to retract and deploy the fabric panel via the lifting channel.

EncoderDevice that is connected to shaft or motor to provide positioning feedback to the controller.

End CapsBlack or white plastic endcaps at trim frame and bottom weight.

Fabric StretchFabric may stretch after installation depending on degree of humidity control in facility.

Machine FrameHeavy duty aluminum frame with removable top and side polyvinyl infill panels.

Lifting ChannelLifting channel is connected to the bands.

Limit SwitchDevice used to stop machine at up or down position. Standard configuration is up, down, up over travel, down over travel.

MotorStandard is 208vac 3phase, 1/4 HP - 3/4 HP.

Fabric PanelTwo parallel surfaces, front & rear, form the fabric panel.

RailAluminum extrusion that holds the fabric segments.

SegmentFixed height fabric segments that make up the body of the panel. Standard sizes are nominal 11” (28cm) and 15” (38cm). The height is measured from stacker to stacker.

Segment, BottomSegment that is used at the bottom of a fabric panel. This piece connects the front and back fabric surfaces.

Segment, TopUppermost segment in a panel assembly, attaches to trim frame.

Segment, VariableVariable height segment that is added below the top segment to achieve the desired overall fabric panel height.

StackerConsists of two aluminum rails and a series of 3” (7.6cm) or 6” (15.2cm) deep plastic clips.

Trim FramePanel hangs from the trim frame; allows for fine adjustment.

Wool Serge (DFR)100% wool fabric. Durably Flame Retardant. Standard and custom colors are available. Fabric weight is 550 g/m2 (29oz). No nap.

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®4 | DATA SHEET: 3W11 & 6W11

3W1120’ (6.1m) tall banner with

11” (28cm) fabric segmentsand 3” (7.6cm) stackers.

Fully deployed.

6W11 3W11

— 20ft (6.1m) banner fully retracted —

The acouStac® Variable Acoustic Banner is a motorized retractablebanner that is used to control the reverberation time in a room.

3W11 & 6W11• The fabric chambers are 3” (7.6cm) or 6” (15.2cm) deep and 11” (28cm) tall.

• 6” (15.2cm) stackers provide greater acoustic absorption & add 3” (7.6m) to the overall fabric panel depth.

• The fabric is 550g/m2 (29oz) DFR Wool Serge in standard or custom colors.

• Standard fabric panel size is up to 20ft (6.1cm) wide and 20ft (6.1cm) tall. Custom sizes are available using custom machines and configurations.

• Individual fabric segments are removable to allow cleaning and repair.

• The acouStac® Fabric Panel is certified by an independent laboratory insuring that it has been tested in accordance with the “Sound Absorption Coefficient by Reverberation Room Method” ASTM [C423-07].

• acouStac® banners ship fully assembled and tested.

• Machine components are UL/UR listed

2.0 AmpMotor Power

32-¾”(83.2cm) 21-½”(54.6cm)

Motor F.L.A. @ 208vac 3 phase0.25 HP 0.5 HP0.98 Amp

3W11 & 6W11sample banner dimensions W x H

250# (113.4kg)Unit Weight

Retracted Banner Ht.Overall Retracted Height

750# (340.2 kg)

21-½”(54.6cm) 32-¾”(83.2cm)

0.25 HP0.98 Amp

380# (172.4 kg)

21½”(54.6cm)

32-¾”(83.2cm)

5’x20’(1.5mx6.1m)

10’x20’(3mx6.1m)

20’x20’(6.1mx6.1m)

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®4 | DATA SHEET: 3W11 & 6W11

MachineThe acouStac® Banner machine consists of components that are engineered to the specific size and configuration of the fabric panels.

Drums are positioned along the width of the banner and support the stainless steel lifting bands, which have a design factor of not less than 8:1. The lifting bands connect to the lifting channel at the bottom. This channel raises and lowers the acouStac® fabric panel(s).

The heavy duty aluminum machine frame with removable top and side machine infill panels are constructed to allow easy access to the motor for service.

The acouStac® Banner is equipped with a 208vac 3 phase gearmotor with a minimum service factor of 1.25. The motor size ranges from 1/4 HP - 3/4 HP depending on the size of the fabric panel(s). The fixed speed gearmotor provides nominal output of 20 - 24 fpm (6.1 - 7.3 mpm). The gearmotor is equipped with a fail-safe brake rated for 200% of the motor capacity.

A four element limit switch provides up and down positioning and over travel protection.

The acouStac® Motor Starter is supplied as a separate assembly. Starters may be in individual cabinets or grouped into a single motor control panel (MCP).

Machine Options• Voltages (220-240vac 3 phase) (440-480vac 3 phase) (other international ranges)• Fixed speeds from 20fpm (6.1 mpm) to 100 fpm (30.5 mpm) • Variable speeds of up to 100 fpm (30.5 mpm) • Encoder for positioning feedback allowing multiple presets• Inverter Starter for single phase input (120vac 1 phase) (230vac 1 phase)

Standard Finishes & Options• Machine frame, trim frame, bottom weight and rails are mill finish aluminum Option: Powdercoat black or standard RAL color selection, 100% gloss.• End caps at trim frame and bottom weight are black or white plastic• Machine frame infill panels are black, light grey, dark grey or white polyvinyl• Stainless steel bands are self-colored• 3” (7.6cm) or 6” (15cm) clips are black plastic• Custom bottom plates for attaching millwork, closure panels, etc. (by others) are available by project specification; paint finish only• Allowable weight of custom bottom plates pending banner configuration• Custom enclosures for machine frame and fabric frame are available by project specification; paint finish only• Alternate fabrics for non-acoustic applications are available by project specification; mock-up required

Control Systems - refer to the acouTroL section for additional details• acouTroL Cambia - a simple push button controller for basic up/down operation.• acouTroL Accent - a push button controller allowing for (4) user settable preset positions for each banner.• acouTroL Symphony - a more sophisticated controller with a touchscreen for larger installations allowing group operation of banners and multiple preset ‘looks’.

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®4 | DATA SHEET: 3W15 & 6W15

3W1520’ (6.1m) tall banner with

15” (38cm) fabric segmentsand 3” (15.2cm) stackers.

Fully deployed.

6W15 3W15

The acouStac® Variable Acoustic Banner is a motorized retractablebanner that is used to control the reverberation time in a room.

3W15 & 6W15• The fabric chambers are 3” (7.6cm) or 6” (15.2cm) deep and 15” (38cm) tall.

• 6” (15.2cm) stackers provide greater acoustic absorption & add 3” (15.2cm) to the overall fabric panel depth.

• The fabric is 550g/m2 (29oz) DFR Wool Serge in standard or custom colors.

• Standard fabric panel size is up to 20ft (6.1m) wide and 20ft (6.1m) tall. Custom sizes are available using custom machines and configurations.

• Individual fabric segments are removable to allow cleaning and repair.

• The acouStac® Fabric Panel is certified by an independent laboratory insuring that it has been tested in accordance with the “Sound Absorption Coefficient by Reverberation Room Method” ASTM [C423-07].

• acouStac® banners ship fully assembled and tested.

• Machine components are UL/UR listed

2.0 Amp3 phase Motor Power

31-¾” (81cm)

20-½” (52cm)

Motor F.L.A. @ 208vac0.25 HP 0.5HP.98 Amp

3W15 & 6W15sample banner dimensions W x H

240# (109kg)Unit Weight

Retracted Banner Ht.Overall Retracted Height

715# (324kg)

20-½” (52cm)

31-¾” (81cm)

0.25 HP.98 Amp

360# (163kg)

20-½” (52cm)

31-¾” (81cm)

5’x20’(1.5mx6.1m)

10’x20’(3mx6.1m)

20’x20’(6.1mx6.1m)

— 20ft (6.1m) banner fully retracted —

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®4 | DATA SHEET: 3W15 & 6W15

MachineThe acouStac® Banner machine consists of components that are engineered to the specific size and configuration of the fabric panel(s).

Drums are positioned along the width of the banner and support the stainless steel lifting bands, which have a design factor of not less than 8:1. The lifting bands connect to the lifting channel at the bottom. This channel raises and lowers the acouStac® fabric panel(s).

The heavy duty aluminum machine frame with removable top and side machine infill panels are constructed to allow easy access to the motor for service.

The acouStac® is equipped with a 208vac 3 phase gearmotor with a minimum service factor of 1.25. The motor size ranges from 1/4 HP to 3/4 HP depending on the size of the fabric panel(s). The fixed speed gearmotor provides nominal output of 20 - 24 fpm (6.1 - 7.3 mpm). The gearmotor is equipped with a fail-safe brake rated for 200% of the motor capacity.

A four element limit switch provides up and down positioning and over travel protection.

The acouStac® Motor Starter is supplied as a separate assembly. Starters may be in individual cabinets or grouped into a single motor control panel (MCP).

Machine Options• Voltages (220-240vac 3 phase) (440-480vac 3 phase) (other international ranges)• Fixed speeds up to 100 fpm (30.5 mpm)

• Variable speeds from 20 fmp (6.1 mpm) to 100 fpm (30.5 mpm)

• Encoder for positioning feedback allowing multiple presets• Inverter Starter for single phase input (120vac 1 phase) (230vac 1 phase)

Standard Finishes & Options• Machine frame, trim frame, bottom weight and rails are mill finish aluminum Option: Powdercoat black or standard RAL color selection, 100% gloss.• End caps at trim frame and bottom weight are black or white plastic• Machine frame infill panels are black, light grey, dark grey or white polyvinyl• Stainless steel bands are self-colored• 3” (7.6cm) or 6” (15cm) clips are black plastic• Custom bottom plates for attaching millwork, closure panels, etc. (by others) are available by project specification; paint finish only• Allowable weight of custom bottom plates pending banner configuration• Custom enclosures for machine frame and fabric frame are available by project specification; paint finish only• Alternate fabrics for non-acoustic applications are available by project specification; mock-up required

Control Systems - refer to the acouTroL section for additional details• acouTroL Cambia - a simple push button controller for basic up/down operation.• acouTroL Accent - a push button controller allowing for (4) user settable preset positions for each banner.• acouTroL Symphony - a more sophisticated controller with a touchscreen for larger installations allowing group operation of banners and multiple preset ‘looks’.

Typical Applications Shown. Custom Configurations Available.

TOP VIEW

SIDE MOUNT MOTOR WITH TOP MOUNT PLATES

FRONT VIEW SIDE VIEW

TOP MOUNT PLATES

TOP MOUNT PLATES

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®4 | DATA SHEET: MOUNTING DETAILS

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®4 | DATA SHEET: MOUNTING DETAILS

Typical Applications Shown. Custom Configurations Available.

TOP VIEW

TOP MOUNT MOTOR WITH REAR MOUNT PLATES

FRONT VIEW SIDE VIEW

REAR MOUNT PLATES

REAR MOUNT PLATES

Industrial Acoustics CompanyAero-AcousticLaboratories

0.8

1

1.2

1.4

-0.2

0

0.2

0.4

0.6

Abs

orpt

ion

Coe

ffic

ient

s

Frequency

1

1.2

1.4

-0.2

0

0.2

0.4

0.6

0.8

Abs

orpt

ion

Coe

ffic

ient

s

Frequency

acouStac 6W11acouStac15” from the wall 15” from the wall

3W11 Empty Room

acouStac 6W11acouStac6” from the wall 6” from the wall

3W11 Empty Room

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

Industrial Acoustics CompanyAero-AcousticLaboratories

0.8

1

1.2

1.4

-0.2

0

0.2

0.4

0.6

Abs

orpt

ion

Coe

ffic

ient

s

Frequency

100% Full Lined Drape acouStac 3W12 Empty Room

1

1.2

1.4

-0.2

0

0.2

0.4

0.6

0.8

Abs

orpt

ion

Coe

ffic

ient

s

Frequency

100% Full Lined Drape acouStac 6W12 Empty Room

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

50 -0.06 -0.07 -0.13 -0.33 -0.0863 0.05 0.14 0.44 0.13 0.1980 0.07 0.52 0.72 0.56 0.51

100 0.29 0.49 0.77 0.56 0.61125 0.21 0.77 0.81 0.64 0.66160 0.59 0.65 0.78 0.62 0.59200 0.84 1.13 1.16 1.01 0.98250 0.95 1.20 1.25 1.07 1.06315 0.86 1.06 1.01 0.95 0.94400 0.93 0.96 0.99 0.91 0.93500 0.92 0.94 0.96 0.91 0.98630 0.90 0.95 0.99 0.93 1.00800 0.83 0.96 1.00 0.94 0.99

1000 0.84 1.00 0.94 0.98 0.931250 0.85 0.98 0.86 0.99 0.901600 0.85 0.95 0.91 0.95 0.912000 0.87 0.90 0.94 0.92 0.932500 0.86 0.88 0.93 0.91 0.943150 0.88 0.89 0.95 0.89 0.924000 0.86 0.91 0.94 0.91 0.925000 0.86 0.90 0.95 0.88 0.926300 0.83 0.93 0.98 0.90 0.898000 0.85 0.96 1.02 0.91 0.95

10000 0.81 0.92 1.04 0.92 0.92

FreqHz.

Double Drape100% fullAbsorptionCoefficients

acouStac3W12

acouStac6W12

Flat Fabric3” apart

Flat Fabric6” apart

Industri al Acoustics CompanyAero- AcousticLaborator ies

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

Accredited by the NATIONAL INSTITUTE OF STANDARDS ANDTECHNOLOGY, NATIONAL VOLUNTARY LAB ACCREDITATIONPROGRAM (Lab code 100404-0) FOR ACOUSTICAL TESTING SERVICES(selected test methods)

Laboratory Report No : 76-0056-01 Date: 4/18/2008

Specimen: Mock-up of a 3” and a 6” ACOUSTAC acoustic banner drapery specimeninside an enclosure.

Client Pook, Diemont & Ohl, Inc.701 E. 132nd Street / Bronx, NY, 10454

Test Type / Standard : Sound Absorption Coefficient by Reverberation Room Method (ASTM C423-07)

Objective: Obtain random-incidence absorption coefficient for specimen.

Description :

An acoustic mock-up using a drapery specimen described as “ACOUSTAC acoustic banner with 26 ounce wool serge” by the client was assembled inside IAC’s 10,000 cu.ft. reverberation room. The mock-up consisted of one12’x5’ ACOUSTAC curtain specimen provided by the client inside a 3/4” thick plywood enclosure with interiordimensions of 12’x5.04’x16” deep. The mock-up was mounted vertically on one of the reinforced steel walls of the reverberation room. The drapery specimen was hung 6” from the back wall of the plywood enclosure. The drapery specimen was hung from two ½” EMT conduit pipes at the top of the plywood enclosure.

Two drapery specimens of differing thicknesses were tested: one specimen was 3” thick; the other was 6” thick.Further design and construction details are the proprietary information of the client.

Clearances between the plywood enclosure and the reverberation room’s wall and floor were sealed with 2” wide duct tape and duct sealer (“plumber’s putty”). A visual inspection determined that the ACOUSTAC specimen consisted of a drapery made of two layers of fabric material, identified by the client as “26 oz. wool serge,” separated by 3” or 6” rigid plates about every 12” along the height of the specimen. Actual specimen dimensions were 12’x5’x3” and 12’x5’x6”. The specimen weight was 30.5 lbs for the 3” sample and 42.5 lbs for the 6” sample.

IAC’s reverberation chamber is of reinforced steel construction with a rectangular shape and an approximate volume of10,000 cu.ft. and total surface area of 3,000 sq.ft. Three 8’x4’ diffusers (both faces are reflective) are placed throughoutthe chamber for sound diffusion purposes. The sound field was sampled with a rotating microphone (60” radius) and abroadband “pink” noise signal.

Test results are listed in Table 1.

Industrial Acoustics CompanyAero-AcousticLaboratories

1160 Commerce AvenueBronx, NY 10462-5599 U.S.A.Phone: (718) 931-8000Fax: (718) 863-1138

Test 76-0056-01: Mock-up of a 3” and a 6” ACOUSTAC acoustic banner drapery specimen inside an enclosure, Page 2 of 4

Industrial Acoustics Company / 1160 Commerce Avenue, Bronx, NY 10462-5599 / Ph: (718) 931-8000 / Fax: (718) 863-1138

Remarks:

1. The measurements of absorption coefficients were made in accordance with the American Society for Testing and Materials (ASTM) standard C423-07. A description of the facilities and instrumentation is available from IAC upon request.

2. The following deviations were taken from the test procedure described in ASTMC423-07:a. Measurements were taken at frequencies below 100 Hz and above 5,000 Hz. Measurements below 100 Hz (and especially

at 50 Hz) fall outside the laboratory’s scope of accreditation and are provided here for information purposes only.3. The repeatability and reproducibility values for the ASTM C423-07 test method are listed in that standard’s Section 13 (Table

2).

Table 1: Absorption Test Results for Mock-up of a 3” and a 6” ACOUSTAC acoustic banner drapery specimen inside an enclosure.

Freq.Hz 3" 6"

50 -0.07 -0.1363 0.14 0.4480 0.52 0.72

100 0.49 0.77125 0.77 0.81160 0.65 0.78200 1.13 1.16250 1.20 1.25315 1.06 1.01400 0.96 0.99500 0.94 0.96630 0.95 0.99800 0.96 1.00

1000 1.00 0.941250 0.98 0.861600 0.95 0.912000 0.90 0.942500 0.88 0.933150 0.89 0.954000 0.91 0.945000 0.90 0.956300 0.93 0.988000 0.96 1.02

10000 0.92 1.04NRC1 1.00 1.00SAA2 0.99 1.00

Temp (oF) 75/72 75/75Humid (%) 78/77 78/78BP (%) 30.6/30.7 30.6/30.71Noise Reduction Coefficient, NRC, per ASTM C423.2Sound Absorption Coefficient, SAA, per ASTM C423.3Test environment conditions listed were those present during empty room measurements and during specimenmeasurement respectively (e.g., "empty room temp/room with specimen temp.")

Absorption Coefficient

Test Environment Conditions3

Specimen Thickness

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

Test 76-0056-01: Mock-up of a 3” and a 6” ACOUSTAC acoustic banner drapery specimen inside an enclosure, Page 3 of 4

Industrial Acoustics Company / 1160 Commerce Avenue, Bronx, NY 10462-5599 / Ph: (718) 931-8000 / Fax: (718) 863-1138

Test Chamber Wall

Test Chamber Floor

Testenclosure

(3/4" plywood- unpainted)

"AcoustacBanner" drapery

specimen(3" thk)

air space

(a) FRONT VIEW (b) SIDE VIEW

60.5" (i.d.)

Mountingbrackets

60"14

4"(i.

d.)

Notes:(1) Two thicnesses, t, of "Acoustac Banner" drapery specimen were tested: t=3", andt=6".(2) Drapery specimen is tied to hanging rods.

16"(i.d.)

SpecimenThickness

(see Note #1)

6" t

2.5" (approx)

Hangingclearance

(see Note #2)

Figure 1: Specimen Layout inside Test Room

Figure 2: Product Literature Sketch of product

Specimen curtain was tested without motorized hoist assembly shown here.

Framing members in the test specimen were solid

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

Test 76-0056-01: Mock-up of a 3” and a 6” ACOUSTAC acoustic banner drapery specimen inside an enclosure, Page 4 of 4

Industrial Acoustics Company / 1160 Commerce Avenue, Bronx, NY 10462-5599 / Ph: (718) 931-8000 / Fax: (718) 863-1138

Report Prepared by: _____________________________Victor Clemente, Test Engineer

Approved by: _____________________________Jon Weinstein, Lab Director NVLAP CODE 100404-0 1

This laboratory (100404-0) is accredited by NVLAP of the National Institute of Standards and Technology for specified tests in accordance with prescribed test methods and accreditation criteria. The use of the NVLAP logo and/or this report does not constitute or imply product certification or endorsements by NVALAP or any agency of the US Government for the product tests referenced herein.

The information provided herein is based on controlled laboratory conditions. The test specimen identification is as provided by the client and IAC accepts no responsibility for any inaccuracies therein. IAC makes no warranty that the results provided herein are representative of actual use conditions. Each user should independently evaluate the data provided and make their own decision as to whether the data is reliable and representative for their service conditions.

IAC authorizes the client named herein to reproduce this report only in its entirety. Testing results apply only to materialspecimens evaluated within this report.

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

5 | ACOUSTICAL DATAacouStac®

Lincoln CenterAlice Tully HallNew York, NY

19 acouStac® Banners

Completed January, 2009

New World SymphonyHallMiami Beach, FL

17 acouStac® Banners

Completed October, 2010

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®6 | APPLICATIONS

Messiah CollegeRecital & Symphony HallGrantham, PA

26 acouStac® Banners

Completed February, 2013

Sonoma State UniversityGreen Music CenterRohnert Park, CA

46 acouStac® Banners

Completed March, 2009

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®6 | APPLICATIONS

Millersville UniversityMillersville, PA

11 acouStac® Banners

Completed January, 2012

Winspear Opera Harmon HallDallas, TX

26 acouStac® Banners

Completed May, 2009

704 E.133rd St. Bronx, NY 10454T e l 7 1 8 . 4 0 2 . 2 6 7 7

w w w . a c o u S t a C o r p . c o m2014

®

acouStac®6 | APPLICATIONS