adam single writer user’s manual eta chips co., kr, 2011 rev 1.0
TRANSCRIPT
ADAM Single Writer
User’s Manual
ETA Chips Co., Kr, 2011
Rev 1.0
1. ADAM Single Writer
< Single Writer Body > < Pack Board >
DIP Board
Socket Board
LAN Interface
DIP Interface
LAN Interface
Socket Interface
ADAM Single Writer support for all device of ETA Chips MCU family.It can work stand alone and also work with PC via USB interface.
2. H/W Configuration
< Single Writer with Pack Board >
USB Interface
DC Adapter Input
POWER Swich
LCD Display
Pack Board
Menu Key
- Push to enter menu mode- Scroll to navigate menu- Push to select menu
Action
1) in AutoWrite mode, START Writing.
2) in Menu mode, cancel menu.
3. USB Driver Install
2) Execute ‘USB_Driver_Install.EXE’ which is supplied in software package.
1) POWER OFF
3) Then follwing dialog box will be appeared.
Click ‘Next’
Select this
option
Click ‘Next’
Click ‘Next’ Click
‘Install’
3.1. Install Sequency
Wait unitl progress completed.
Click ‘Finish’
Click ‘Install’
4) POWER ON. Wait until Driver Installation is finished.
2.2. Trouble Shooting
If software can’t communicate with H/W, then do the follwing step.
2) Excute ‘Control Panel’ of MS-Windows.
3) Select ‘Device Manager’
Double Click this item
Click this button
Select this menu
1) POWER ON
Click this button
Change COM Port number to another value from COM3 ~
COM9
Then Click ‘OK’
4) POWER OFF
5) POWER ON
6) Execute Writer Software
4. Software Configuration4.1. Main Screen
Device Select ROM Size Select
ROM Size Select
Option Bit Setting
Program Option
Program/Verify Action
Memory Dump
Save Buffer to File
Status Display
H/W debugging password.
(only for developer)
4.2. Writing Sequency (ADAM24P20, 1KB, example)
1) Select Device and ROM Size
2) Download Hex File
Select HEX file in this dialog box
3) Option Bit Setting
ADAM24P20 has no OptionBit, So this button is disabled.
4) Program Option Setting
Recommend use Default H/W Setting
5) Start Programming
If push ‘START’ button of H/W, Programming also will be start
Press ‘Auto Write’ Button,then Programming will be start
After this point, ADAM single writer can act as Stand Alone mode.