adaptabel ac single stroke bellsstevenengineering.com/tech_support/pdfs/16bellbuz.pdf · 5-9...
TRANSCRIPT
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-2
Adaptabel single stroke bells produce an individual, clearly defined
note. When current is applied, the striker hits the gong once and
stops. Coded, intermittent current may be used to cause the striker to
hit the gong, pause and hit again for any given period. Ideal for use
with momentary initiating contacts.
Universal Adaptaplate® mounts directly on surface or fits any
single-gang box, 3 1/4" (83 mm), 3 1/2" (89 mm), or 4 " (102 mm)
octagon box, or any plaster cover with mounting holes on 2 3/4" (70
mm) centers. 6" and 10" bells also mount on 4" (102 mm) square
boxes. See accessories on page 5-10.
Specified for timing, scheduling, paging and general alarm applica-
tions. 4" (102 mm) sizes recommended for quiet office areas. 6" (152
mm) sizes for moderate noise level areas such as general factory ar-
eas. 10" (254 mm) sizes for loud areas such as heavy machine shops.
Available with full cast grids and protective grilles. See Accessories
on page 5-10 for available options.
Adaptabel® AC SingleStroke Bells
332 Series
PLC Compatible
FEATURES
> Completely assembled, allhardware supplied
> Universal Adaptaplate mountsdirectly on surface or electricalbox
> Shockproof die cast housing
> Dustproof
AGENCY APPROVALS
> UL 464 Listed
> FM Listed
SPECIFICATIONS
> Rated 400 hours at 50% dutycycle
> Self-compensating solenoidplunger
> Corrosion resistant heat flowedepoxy finish
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-3
dB at DC CoilCat No.* Volts Amps VA 1m / 10 ft. Res (Ohms)
332-4G5 24V AC 50/60 Hz 0.50 12 90 / 84 10332-4N5 120V AC 50/60 Hz 0.10 12 250
332-6G5 24V AC 50/60 Hz 0.50 12 92 / 86 10332-6N5** 120V AC 50/60 Hz 0.10 12 250332-6R5 240V AC 50/60 Hz 0.05 12 1000
332-10G5 24V AC 50/60 Hz 0.70 16.8 98 / 92 5332-10N5** 120V AC 50/60 Hz 0.14 16.8 130*Gong Size in inches denoted by suffix in catalog number.** Diode Polarized models avaiable. Order 332D-6N5 or 332D-10N5. Add "-R" for red.
SIGNAL INPUT LOAD CHARACTERISTICS†
Light Source Operating Max. off state Continuous on Surge (inrush/duration)Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds
332-4N5 120V AC 60 Hz 25 100 0.41/4.5332-6N5 120V AC 60 Hz 25 100 0.40/4.6332-10N5 120V AC 60 Hz 25 140 0.53/4.5† This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
2 13/32"(61 mm)
4 1/2"(114 mm)
3 11/16"(94 mm)
7 1/8"(181 mm)
4 13/16"(122 mm)
10 1/2"(267 mm)
4" Bell
6" Bell
10" Bell
EASY INSTALLATION USING THE SUPPLIED ADAPTAPLATE
1. Pull wires throughcenter hole and connect tobinding post.
3. Tighten front screw to completeinstallation. (Two screws on 4inch bells)
2. Slip Adaptabel onto sturdyhanger and push home. D
-04
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-12
Hazardous location AC single stroke bells produce a distinctive, loud,
and clear individual note that is free of mechanical clatter. When cur-
rent is applied, the striker hits the gong once and stops. Current may
be coded to cause the striker to hit the gong intermittently. Ideal for
use with momentary initiating contacts.
Mounts to any solid surface using 3/8" (10mm) fasteners. Units fitted
with a sealing fitting for 3/4" (19mm) conduit and wire leads for power
connections.
Used for coded signal applications such as paging. Also specified for
timing, scheduling, and general alarm applications in: Refineries,
gasoline storage and dispensing areas, petrochemical manufacturers,
spray paint areas, aircraft hangers, grain dust areas in graineries and
flour mills, and industrial firms using flammable liquids.
Adaptabel® ACSingle Stroke Bells
332EX Series
Explosionproof, NEMA Type 4
FEATURES
> 6" and 10" gong sizes
> Low power drain for efficientoperation over long wire runs
> Completely assembled
> Weatherproof
AGENCY APPROVALS
> UL 1203 Listed
> UL Listed for Class I, Divisions 1and 2, Groups B, C and D; ClassII, Divisions 1 and 2, Groups E, Fand G; and Class III
> NEMA Type 4
SPECIFICATIONS
> Adjustment free self-compensating plunger
> Corrosion resistant finish
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-13
Gong DimensionsSize A B C
6" 4 1/16" 4 13/16" 5/8"(152mm) (103mm) (122mm) (16mm)
10" 6 1/16" 5 3/8" 2 5/8"(245mm) (154mm) (137mm) (67mm)
1 7/16"(37mm)
B
A
Mtg.Bracket3/16"
(5mm)
1 1/4"(32mm)
Mounting hole positions for3/8" (10mm) diameter (max)fasteners with washers
MountingBrackets
6" ± 1/8"(152mm ± 3mm)
C
Peak dB atCat No. Volts Current* 1m / 10 ft. Gong Size
332EX-6G5 24V AC 50/60 Hz 3.40A 92 / 86 6" (152 mm)332EX-6N5 120V AC 50/60 Hz 0.43A332EX-6R5 240V AC 50/60 Hz 0.20A
332EX-10G5 24V AC 50/60 Hz 3.40A 100 / 94 10" (254 mm)332EX-10N5 120V AC 50/60 Hz 0.43A332EX-10R5 240V AC 50/60 Hz 0.20A*Single pulse duration - 8 to 16 milliseconds
D-04
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-4
DC single stroke bells produce an individual, clearly defined note.
When current is applied, the striker hits the gong once and stops.
Coded, intermittent current may be used to cause the striker to hit the
gong, pause and hit again for any given period. Ideal for use with mo-
mentary initating contacts.
Universal Adaptaplate® mounts directly on surface or fits any
single-gang box, 3 1/4" (83 mm), 3 1/2" (89 mm), or 4 " (102 mm)
octagon box, or any plaster cover with mounting holes on 2 3/4" (70
mm) centers. 6" and 10" bells also mount on 4" (102 mm) square
boxes.
Specified for timing, scheduling, paging and general alarm applica-
tions. 4" (102 mm) sizes recommended for quiet office areas. 6" (152
mm) sizes for moderate noise level areas such as general factory ar-
eas. 10" (254 mm) sizes for loud areas such as heavy machine shops.
Available with full cast grids and protective grilles. See AdaptaBel Ac-
cessories on page 5-10.
Adaptabel® DCSingle Stroke Bells
333 Series
PLC Compatible
FEATURES
> Universal Adaptaplate mountsdirectly on surface or electricalbox
> Indoor
AGENCY APPROVALS
> UL 464 Listed
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-5
dB at DC CoilCat No.* Volts Amps VA 1m / 10 ft. Res (Ohms)
333-4G1 24 0.30 7.2 90 / 84 73
333-6E1 12 0.60 7.2 18333-6G1 24 0.30 7.2 92 / 86 73333-6P1 125 0.06 7.5 1870
333-10G1 24 0.30 7.2 98 / 92 73333-10P1 125 0.06 7.5 1870*Gong Size in inches denoted by suffix in catalog number.
SIGNAL INPUT LOAD CHARACTERISTICS**Light Source Operating Max. off state Continuous on Surge (inrush/duration)Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds
333-4G1 24V DC 5 300 1.57/0.0001333-6G1 24V DC 5 300 1.72/0.0001333-10G1 24V DC 5 300 1.3/0.000182**This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spikesuppression. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
EASY INSTALLATION USING THE SUPPLIED ADAPTAPLATE
1. Pull wires throughcenter hole and connect tobinding post.
3. Tighten front screw to completeinstallation. (Two screws on 4inch bells)
2. Slip Adaptabel onto sturdyhanger and push home.
4 13/16"(122 mm)
10"(254 mm)
10" Bell
2 29/32"(74 mm)
6"(152 mm)
6" Bell
4" Bell2 15/32"(63 mm)
4"(102 mm)
D-04
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-6
AC vibrating bells produce a long continuous ringing sound. The
striker continues to strike the gong in rapid-fire action as long as cur-
rent is applied.
Universal Adaptaplate® mounts directly on surface or fits any
single-gang box, 3 1/4" (83 mm), 3 1/2" (89 mm), or 4 " (102 mm)
octagon box, or any plaster cover with mounting holes on 2 3/4" (70
mm) centers. 6" and 10" bells also mount on 4" (102 mm) square
boxes.
Specified for timing, scheduling, paging and general alarm applica-
tions. 4" (102 mm) sizes recommended for quiet office areas. 6" (152
mm) sizes for moderate noise level areas such as general factory ar-
eas. 10" (254 mm) sizes for loud areas such as heavy machine shops.
Available with full cast grids and protective grilles. May be weather-
proofed with the addition of a weatherproof box. See AdaptaBel Acces-
sories on page 5-10 for available options.
Adaptabel® ACVibrating Bells
340 Series
PLC Compatible
FEATURES
> Universal Adaptaplate mountsdirectly on surface or electricalbox
> Weatherproof by addingappropriate back box
> Completely assembled, allhardware supplied
> Shockproof die cast housing
> Dustproof
AGENCY APPROVALS
> UL 464 Listed
> FM Listed
> CSFM Certified
SPECIFICATIONS
> Self-compensating solenoidplunger
> Rated 400 hours at 50% dutycycle
> Corrosion resistant heat flowedepoxy finish
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-7
4" Bell
6" Bell
EASY INSTALLATION USING THE SUPPLIED ADAPTAPLATE
1. Pull wires throughcenter hole and connect tobinding post.
3. Tighten front screw to completeinstallation. (Two screws on 4inch bells)
2. Slip Adaptabel onto sturdyhanger and push home.
SIGNAL INPUT LOAD CHARACTERISTICS**Light Source Operating Max. off state Continuous on Surge (inrush/duration)Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds
340-4N5 120V AC 60 Hz 25 62 0.095/4340-6N5 120V AC 60 Hz 25 70 0.15/4340-10N5 120V AC 60 Hz 25 70 0.15/4**This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
dB at DC CoilCat No.* Volts Amps VA 1m / 10 ft. Res (Ohms)
340-4E5 12 0.620 7.4 94 / 88 13340-4FM 16 0.460 7.4 22340-4G5 24 0.310 7.4 50340-4N5 120 0.062 7.4 1300340-4R5 240 0.031 7.4 5000
340-6E5 12 0.700 8.4 98 / 92 8340-6FM 16 0.500 8.0 13340-6G5 24 0.350 8.4 30340-6N5 120 0.070 8.4 700340-6R5 240 0.035 8.4 2650
340-10G5 24 0.350 8.4 102 / 96 30340-10N5 120 0.070 8.4 700340-10R5 240 0.350 8.4 2650
*Gong Size in inches denoted by suffix in catalog number.
2 13/32"(61 mm)
4 1/2"(114 mm)
3 11/16"(94 mm)
7 1/8"(181 mm)
4 13/16"(122 mm)
10 1/2"(267 mm)
10" Bell
D-04
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-14
Hazardous location DC single stroke bells produce a distinctive, loud,
and clear individual note that is free of mechanical clatter. When cur-
rent is applied, the striker hits the gong once and stops. Current may
be coded to cause the striker to hit the gong intermittently. Ideal for
use with momentary initiating contacts.
Mounts to any solid surface using 3/8" (10mm) fasteners. Units fitted
with a sealing fitting for 3/4" (19mm) conduit and wire leads for power
connections.
Used for coded signal applications such as paging. Also specified for
timing, scheduling, and general alarm applications in refineries,
gasoline storage and dispensing areas, petrochemical manufacturers,
spray paint areas, aircraft hangers, grain dust areas in graineries and
flour mills, and industrial firms using flammable liquids.
Adaptabel® DCSingle Stroke Bells
333EX Series
Explosionproof, NEMA Type 4
FEATURES
> 6" and 10" gong sizes
> Low power drain for efficientoperation over long wire runs
> Completely assembled
> Weatherproof
AGENCY APPROVALS
> UL 1203 Listed
> UL Listed for Class I, Divisions 1and 2, Groups B, C and D; ClassII, Divisions 1 and 2, Groups E, Fand G; and Class III
> NEMA Type 4
SPECIFICATIONS
> Adjustment free self-compensating plunger
> Corrosion resistant finish
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-15
Gong DimensionsSize A B C
6" 4 1/16" 4 13/16" 5/8"(152mm) (103mm) (122mm) (16mm)
10" 6 1/16" 5 3/8" 2 5/8"(245mm) (154mm) (137mm) (67mm)
Peak dB atCat No. Volts Current* 1m / 10 ft. Gong Size
333EX-6G1 24V DC 3.50A 92 / 86 6" (152 mm)333EX-6P1 125V DC 0.52A
333EX-10G1 24V DC 3.50A 100 / 94 10" (254 mm)*Single pulse duration - 8 to 16 milliseconds
1 7/16"(37mm)
B
A
Mtg.Bracket3/16"
(5mm)
1 1/4"(32mm)
Mounting hole positions for3/8" (10mm) diameter (max)fasteners with washers
MountingBrackets
6" ± 1/8"(152mm ± 3mm)
C
D-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Edwards vibrating AdaptaBuzzers are the finest, heavy duty buzzers
available. The AC models are volume adjustable.
Universal Adaptaplate® mounts directly on any single-gang box, 3
1/4" (83 mm), 3 1/2" (89 mm), or 4 " (102 mm) octagon box. Buzzer
plugs into receptacle on mounting plate. For flush mounting acces-
sories see page 5-10.
Used for timing, scheduling, and paging applications. Use wherever
a relatively low decibel signal of a different tone is required.
AdaptaBuzzerTM
AC and DC Models
5 1/16"(128mm)
2 1/4"(57mm)
FEATURES
> Vibrating Armature
> Universal Adaptaplate® mountsdirectly on surface or electricalbox
> Plug-in convenience
> Corrosion resistant heat flowedepoxy finish
AGENCY APPROVALS
> 340A Series UL 464 Listed
> 340A Series FM Approved
340A & 343A Series
DC Coil dB atCat No. Volts Amps VA Res (ohms) 1m / 10 ft.
340A-G5 24V 50/60 Hz 0.250A 6.0 28 76 / 70340A-N5 120V 50/60 Hz 0.050A 6.0 725340A-R5 240V 50/60 Hz 0.025A 6.0 2900
343A-E1 12V DC 0.330 4.0 9.4 68 / 62343A-G1 24V DC 0.150 3.6 28343A-M1 75V DC 0.065 4.9 360343A-P1 125V DC 0.070 8.8 1000
5-28
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-16
Hazardous location AC vibrating bells produce a distinctive, loud,
and clear ringing sound that is free of mechanical clatter. The striker
continues to strike the gong in rapid-fire action as long as current is
applied.
Mounts to any solid surface using 3/8" (10mm) fasteners. Units
fitted with a sealing fitting for 3/4" (19mm) conduit and wire leads
for power connections.
Specified for timing, scheduling, paging, and general alarm applica-
tions in refineries, gasoline storage and dispensing areas, petro-
chemical manufacturers, spray paint areas, aircraft hangers, grain
dust areas in graineries and flour mills, and industrial firms using
flammable liquids.
Adaptabel® ACVibrating Bells
340EX Series
Explosionproof, NEMA Type 4
FEATURES
> 6", 8" and 10" gong sizes
> Low power drain for efficientoperation over long wire runs
> Completely assembled
> Weatherproof
AGENCY APPROVALS
> UL 1203 Listed
> UL Listed for Class I, Divisions 1and 2, Groups B, C and D; ClassII, Divisions 1 and 2, Groups E, Fand G; and Class III
> NEMA Type 4
SPECIFICATIONS
> Adjustment free self-compensating plunger
> Corrosion resistant finish
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-17
Gong DimensionsSize A B C
6" 4 1/16" 4 13/16" 5/8"(152mm) (103mm) (122mm) (16mm)
8" 5 1/16" 5 1/4" 1 5/8"(203mm) (129mm) (133mm) (41mm)
10" 6 1/16" 5 3/8" 2 5/8"(245mm) (154mm) (137mm) (67mm)
RMS dB atCat No. Volts Current 1m / 10 ft. Gong Size340EX-6G5 24V AC 50/60 Hz 0.210A 90/84 6" (152mm)340EX-6N5 120V AC 50/60 Hz 0.041A340EX-6R5 240V AC 50/60 Hz 0.021A340EX-8N5 120V AC 50/60 Hz 0.041A 95/89 8" (203mm)340EX-10G5 24V AC 50/60 Hz 0.210A 94/88 10" (254mm)340EX-10N5 120V AC 50/60 Hz 0.041A340EX-10R5 240V AC 50/60 Hz 0.021A
1 7/16"(37mm)
B
C
Mtg.Bracket3/16"
(5mm)
1 1/4"(32mm)
Mounting hole positions for3/8" (10mm) diameter (max)fasteners with washers
MountingBrackets
6" ± 1/8"(152mm ± 3mm)
C
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
5-25BELLS & BUZZERS
Compact single-stroke bell sounding a crisp, clean tone.
For low cost, light duty installations in factories, institutions, of-
fices, and OEMs. Uses include: doorbells, extension signals, warn-
ing bells, and audible annunciation. Ideal for end of cycle timing,
signaling, and paging.
General Purpose Bells
432 Series
Solid Brass Shell
FEATURES
> Low cost
> 2 1/2" Solid Brass Shell
> Low current drain permits longwire runs
DC Coil dB atCat. No. Volts Amps VA Res. (Ohms) 1m / 10 ft
432-G5 24V AC 0.350 8.4 33.0 78 / 72
432-N5 120V AC 0.065 7.8 864.0 78 / 72
2 1/2"(64mm)
1 1/4"(32mm)
1 1/2"(38mm)
D-04
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-8
DC vibrating bells produce a long continuous ringing sound. The
striker continues to strike the gong in rapid-fire action as long as cur-
rent is applied.
Universal Adaptaplate® mounts directly on surface or fits any single
gang box, 3 1/4" (83mm), 3 1/2" (89mm), or 4" (102mm) octogon box, or
any plaster cover with mounting holes on 2 3/4" (70mm) centers. 6"
and 10" bells also mount on 4" (102mm) square boxes.
The DC vibrating bell can be used in outdoor applications when
mounted on Cat. No. 449 weatherproof back box. See AdaptaBel acces-
sories on page 5-10.
Specified for timing, scheduling, and general alarm applications.
Adaptabel® DCVibrating Bells
435 Series
PLC Compatible
FEATURES
> Universal Adaptaplate mountsdirectly on surface or electricalbox
> Weatherproof by adding 449 backbox
> 4", 6" 8" and 10" gong sizes
AGENCY APPROVALS
> UL 464 Listed
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-9
4" Bell 2 29/32"(74 mm)
6"(152 mm)
6" Bell
4 13/16"(122 mm)
10"(254 mm)
10" Bell
8" Bell
8"(203mm)
3 11/32"(85mm)
2 15/32"(63mm)
4"(102mm)
SIGNAL INPUT LOAD CHARACTERISTICS**Light Source Operating Max. off state Continuous on Surge (inrush/duration)Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds435-4G1 24V DC 5 62 1.06/0.0001435-6G1 24V DC 5 62 1.14/0.000125435-10G1 24V DC 5 62 1.14/0.000125**This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spikesuppression. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
dB at DC CoilCat No.* Volts Amps VA 1m / 10 ft. Res (Ohms)435-4C1 6 0.250 1.5 96 / 90 11435-4E1 12 0.125 1.5 96 / 90 40435-4G1 24 0.062 1.5 96 / 90 155435-4J1 32 0.047 1.5 96 / 90 275435-4P1 125 0.012 1.5 96 / 90 3000435-6C1 6 0.250 1.5 98 / 92 11435-6E1 12 0.125 1.5 98 / 92 40435-6G1 24 0.062 1.5 98 / 92 155435-6J1 32 0.047 1.5 98 / 92 275435-6K1 48 0.031 1.5 98 / 92 620435-6P1 125 0.012 1.5 98 / 92 3000435-6S1 250 0.008 2.0 96 / 90 6100435-8C1 6 0.250 1.5 99 / 93 11435-8E1 12 0.125 1.5 99 / 93 40435-8G1 24 0.062 1.5 99 / 93 155435-8P1 125 0.012 1.5 99 / 93 3000435-10E1 12 0.125 1.5 100 / 94 40435-10G1 24 0.062 1.5 100 / 94 155435-10P1 125 0.012 1.5 100 / 94 3000435-10S1 250 0.008 2.0 96 / 90 6100*Gong Size denoted by suffix in catalog number.*Gong Size in inches denoted by suffix in catalog number.
D-04
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com5-18
Hazardous location DC vibrating bells produce a distinctive, loud,
and clear ringing sound that is free of mechanical clatter. The striker
continues to strike the gong in rapid-fire action as long as current is
applied.
Mounts to any solid surface using 3/8" (10mm) fasteners. Units fit-
ted with a sealing fitting for 3/4" (19mm) conduit and wire leads for
power connections.
Specified for timing, scheduling, paging, and general alarm applica-
tions in: Refineries, gasoline storage and dispensing areas, Petro-
chemical manufacturers, Spray paint areas, Aircraft hangers, Grain
dust areas in granaries and flour mills, and Industrial firms using
flammable liquids.
Adaptabel® DCVibrating BellsExplosionproof, NEMA Type 4
FEATURES
> 6", 8" and 10" gong sizes
> Low power drain for efficientoperation over long wire runs
> Completely assembled
> Weatherproof
> Diode Polarized Models availablefor use in electrically supervisedcircuits
AGENCY APPROVALS
> UL 1203 Listed
> UL Listed for Class I, Divisions 1and 2, Groups B, C and D; ClassII, Divisions 1 and 2, Groups E, Fand G; and Class III
> NEMA Type 4
SPECIFICATIONS
> Adjustment free self-compensating plunger
> Corrosion resistant finish
435EX Series
D-0
4
BELLS & BUZZERS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
5-19
Gong DimensionsSize A B C
6" 4 1/16" 4 13/16" 5/8"(152mm) (103mm) (122mm) (16mm)
8" 5 1/16" 5 1/4" 1 5/8"(203mm) (129mm) (133mm) (41mm)
10" 6 1/16" 5 3/8" 2 5/8"(245mm) (154mm) (137mm) (67mm)
1 1/4"(32mm)
Mounting hole positions for3/8" (10mm) diameter (max)fasteners with washers
MountingBrackets
6" ± 1/8"(152mm ± 3mm)
C
RMS dB atCat No. Volts Current 1m / 10 ft. Gong Size435EX-6C1 6 1.520435EX-6E1 12 0.520435EX-6G1 24 0.240 89/83 6" (152mm)435EX-6K1 48 0.110435EX-6P1 125 0.040435EX-6S1 250 0.023435EX-8G1 24 0.290435EX-8K1 48 0.110 92/86 8" (203mm)435EX-8P1 125 0.040435EX-8S1 250 0.023435EX-10E1 12 0.520435EX-10G1 24 0.290 95/89 10" (254mm)435EX-10P1 125 0.040435DEX-6G1+ 24 0.290 89/83 6" (152mm)435DEX-8G1+ 24 0.290 92/86 8" (203mm)435DEX-10G1+ 24 0.290 95/89 10" (254mm)+Diode polarized for use in electrically supervised circuits. CSFM Listed
1 7/16"(37mm)
B
A
Mtg.Bracket3/16"
(5mm)
D-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com5-22BELLS & BUZZERS
D
A
B
C
Compact size and pleasant sound make these bells desirable for
use in offices, apartment houses, intercom and telephone signaling,
machinery and other OEM uses.
Suitable for AC powered security systems with battery standby.
General PurposeMiniature BellsAC and DC Models
FEATURES
> 1", 2" and 3" sizes
> Long Life
> Dust proof covers
> Adjustable volume
> Grounded frame
> External binding posts
> Chrome plate finish
DC Coil dB at DimensionCat No. Size Volts Amps VA Res (ohms) 1 m / 10 ft. A B C D13-1AB 1" 5 - 10 DC 0.35 2.0 10
(25 mm) 6 - 12 AC 0.50 4.0 10 70 / 64 1 1/4" 3/4" 3 1/8" 1 3/4"13-1G1 24 DC 0.20 4.8 120 (32mm) (19mm) (79mm) (44mm)13-1G5 24 AC 0.20 4.8 8513-2AB 2" 5-10 DC 0.40 2.5 8
(51 mm) 6-12 AC 0.50 4.0 8 71 / 65 1 3/4" 1 1/16" 3 29/32" 2 1/32"13-2G1 24 DC 0.25 6.0 90 (44mm) (27mm) (99mm) (52mm)13-2G5 24 AC 0.25 6.0 5613-3AB 3" 5 - 10 DC 0.60 3.5 5
(76 mm) 6 - 12 AC 0.40 3.5 5 73 / 67 3" 1 9/16" 5 7/8" 3 1/2"13-3G1 24 DC 0.25 6 44 (76mm) (40mm) (149mm) (89mm)13-3G5 24 AC 0.25 6 30
13 Series
D-0
4
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
5-23BELLS & BUZZERS
DC Coil dB at DimensionCat No. Size Volts Amps VA Res (ohms) 1m / 10 ft. A B C55-4AM 4" 6V DC 0.85A 5.1 2.2 4" 2 1/8" 7 3/8"
(102mm) 8V AC 1.10A 8.8 2.2 74 / 68 (102mm) (54mm) (187mm)55-4G5 24V AC 0.20A 4.8 20.055-6AM 6" 6V DC 0.80A 4.8 1.9 6" 2 5/8" 10 5/8"
(152mm) 8V AC 1.00A 8.0 1.9 80 / 74 (44mm) (27mm) (99mm)55-6G5 24V AC 0.20A 4.8 24.0
B
C
A
Economy single magnet bell. Exposed striker, vibrating bell comes
with an enclosed grounded terminal and case.
For low cost, light duty installations in factories, institutions, offices,
and OEMs. Used as doorbells, extension signals, warning bells,
and audible annunciators. Especially suitable for AC powered secu-
rity systems with battery backup.
General Purpose Bells
AC and DC Models
FEATURES
> 4" and 6" gong sizes
> AC and DC Models
> Low Voltage
> Gray finish
> Low current drain permits longwire runs
55 Series
D-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com5-24BELLS & BUZZERS
B
A
Self-contained underdome monitor bell. Weatherproof, insulated,
and grounded vibrating bell with concealed plunger. Mounts on
3 3/4" (95mm) bolt circle.
For low cost, light duty installations in factories, institutions, offices,
and OEMs. Uses include doorbells, extension signals, warning bells
and annunciation. Suitable for AC systems with battery backup.
General Purpose Bells
156G Series
AC and DC Models
FEATURES
> 3", 4" and 6" gong sizes
> Low current drain permits longwire runs
> Supplied with weatherproofgasket for outdoor applications
> Corrosion resistant gray finish
dB at DimensionCat No. Size Volts Amps 1m / 10 ft. A B156G-3AM 3" 6-8V DC 8-10V AC 0.80156G-3AX (76 mm) 12-18V DC 0.20 3" 1 7/8"156G-3G1 24V DC 0.15 78 / 72 (76mm) (48mm)156G-3G5 24V AC 0.30156G-4AM 4" 6-8V DC 8-10V AC 0.80 4" 1 7/8"156G-4G1 (102 mm) 24V DC 0.15 82 / 76 (102mm) (48mm)156G-4G5 24V AC 0.30156G-6AM 6-8V DC 8-10V AC 0.80156G-6AW 6" 20-24V DC 0.15 86 / 80 6" 2 5/16"156G-6G1 (152 mm) 24V DC 0.15 (152mm) (59mm)156G-6G5 24V AC 0.30D
-04
Low cost, non adjustable bell which may be operated off of a 590
transformer or DC power.
Universal economy bell widely used in homes, apartment houses,
plants, OEMs. Especially suitable for AC powered security sys-
tems with battery standby.
For office installation, see Cat. No. 13 Series Bells on page 5-22 or
Cat. No. 15 and 115 Series Buzzers on pages 5-34 and 5-35. For
combination bell and buzzer see Cat. No. 730 Dixie BuzabelTM on
page 5-38.
General PurposeDixie BellTM
720 Series
Fully Enclosed
1"(25mm)
5 1/4"(133mm)
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS5-
26
DC Coil dB atCat. No. Volts Amps VA Res. (Ohms) 1m / 10 ft
720 6-8V AC 1.20A 7.0 1.5 84 / 783-6V DC
FEATURES
> Low voltage
> AC and DC operation
> Attractive snap-on covers
> Enclosed binding posts
> Corrosion resistant metallic finish
3"(76mm)
D-0
4
Low cost, non adjustable bell which may be operated off of a 590
transformer or DC power. Universal economy bell widely used in
homes, apartment houses, plants, OEMs. Especially suitable for
AC powered systems with battery standby.
For office installation, see Cat. No. 13 Series Bells on page 5-22 or
Cat. No. 15 and 115 Series Buzzers on pages 5-34 and 5-35. For
combination bell and buzzer see Cat. No. 730 Dixie BuzabelTM on
page 5-38.
Nubel GeneralPurpose Bells
740 & 744 Series
AC and DC Models
C
B
A
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
BELLS & BUZZERS5-27
DC Coil dB at DimensionCat No. Volts Amps VA Res (ohms) 1m / 10 ft. A B C
740 6-8V AC 1.20 7.0 1.5 84 / 78 2 1/2" 1 1/4" 5 3/4"3-6V DC (64 mm) (32 mm) (146 mm)
744 6-8V AC 1.20 10.0 1.5 84 / 78 4" 1 3/4" 6 7/8"3-6V DC (102mm) (44mm) (175mm)
FEATURES
> AC and DC Models
> Low Voltage
> Exposed gong
> Attractive snap-on covers
> Enclosed binding posts
> Corrosion resistant metallic finish
D-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
The Cat. No. 725 is a low cost, fully insulated, non adjustable
buzzer. The Cat. No. 730 is a low cost, non adjustable combination
bell and buzzer with grounded frame. May be operated using AC
power supplied by a 590 transformer or from DC power. See Trans-
former Catalog Page 11-2.
Universal economy buzzer or bell and buzzer combination widely
used in homes, apartment houses, plants, and OEMs.
Dixie BuzzerTM &Dixie BuzabelTM
725 & 730 Series
Low voltage
FEATURES
> Low voltage
> Attractive snap on covers
> Fully enclosed
> Satin aluminum finish
> Cat. No. 725 - enclosed bindingposts
> Cat. No. 730 - enclosed terminals
A 1"(25mm)
B
DC Coil dB atCat. No. Volts Amps VA Res. (Ohms) 1m / 10 ft A B
725 6V AC 1.20A 7.2 1.0 88 / 82 1 3/4" 2 3/4"(45mm) (69mm)
730 6V AC 0.7A 4.2 3 88 / 82 3" 5 1/4"3-6V DC 1.4A 8 3 (76mm) (133mm)
6-8V AC 60 Hz 1.4A 8 3
5-36
D-0
4
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Compact, dependable buzzer designed for long life and trouble-free
installations. For installation in commercial buildings, offices, and
OEM applications.
MiniatureLungenTM Buzzer
15 Series
AC and DC Models
FEATURES
> Adjustable volume
> Chrome cover; zinc plated base
DC Coil dB at DimensionCat No. Volts Amps VA Res (ohms) 1m / 10 ft. A B C D
15-0AJ 5-8V DC 0.2 1.2 106-10V AC 0.3 2.4 10 71.5 / 65.5 1 5/8" 1 15/32" 1/2" 1 13/32"
15-0G1 24V DC 0.1 2.4 120 (41mm) (37mm) (13mm) (36mm)15-0G5 24V AC 0.2 4.8 85
15-1AB 5-10V DC 0.3 2 86-12V AC 0.45 3.5 8 2 1/8" 1 13/16" 19/32" 1 53/64"
15-1E1 12V DC 0.2 2.4 20 74 / 68 (54mm) (46mm) (15mm) (46mm)15-1G1 24V DC 0.1 2.4 9015-1G5 24V AC 0.25 6 56
15-2AB 5-10V DC 3.5 2 66-12V AC 3.0 3 6 75 / 69 2 5/8" 2 3/8" 15/16" 2 3/32"
15-2G1 24V DC 0.15 3.6 60 (66mm) (60mm) (24mm) (53mm)15-2G5 24V AC 0.25 6 40
15-3AB 5-10V DC 0.3 2 56-12V AC 0.4 2.5 5 3" 2 1/2" 7/8" 2 3/8"
15-3E1 12V DC 0.2 2.4 20 80.5 / 74.5 (76mm) (64mm) (22mm) (60mm)15-3G1 24V DC 0.2 4.8 4415-3G5 24V AC 0.25 6 30
A
B C
D
5-34
D-0
4
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Compact, dependable buzzer designed for long life and trouble-free
installations. For installation in commercial buildings, offices, and
OEM applications.
MiniatureLungenTM Buzzer
115 Series
AC Operation
FEATURES
> Adjustable volume
> Chrome cover
> Zinc plated base
> Contact-less
DC Coil dB at DimensionCat No. Volts Amps VA Res (ohms) 1m / 10 ft. A B C D
115-1AC 8V AC 0.4 3.2 12.5 79 / 73 2 5/32" 1 9/32" 5/8" 1 25/32"115-1G5 24V AC 0.2 4.8 80 (55mm) (32mm) (16m) (45mm)
115-2AC 8V AC 0.5 4 6.5 83 / 77 2 5/8" 1 11/16" 25/32" 2 3/32"115-2G5 24V AC 0.2 4.8 45 (66mm) (43mm) (20mm) (53mm)
115-4AC 8V AC 0.45 4 3.6 86 / 80 3 7/16" 2 3/16" 1 1/8" 2 27/32"115-4G5 24V AC 0.25 6 28 (87mm) (55mm) (28mm) (72mm)
A
B C
D
5-35D
-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Edwards 118 Series DC and 123A Series AC Midi Vibrating Horns
are designed primarily for security systems and for signaling de-
vices on an OEM basis.
Supplied with mounting bracket and simply attaches to mounting
surface using #8-32 screw.
Used for security systems, office machines, low-voltage trouble
alarms, home appliances, data monitoring systems, computers,
and timing devices.
Midi Vibrating Horns
118 & 123A Series
Compact size
FEATURES
> Low power drain
> Compact size
> Shock resistant
> Easy surface mount installation
SPECIFICATIONS
> Temperature range: -40° to 180°F(-40 to 82°C)
> Weight: 3 oz (85g)
3/16"(5mm)
2 1/32"(51mm)
1 3/4"(45mm)
6" (152mm)2 wires on AC
A
DC Coil dB at WidthCat No. Volts Amps VA Res (ohms) 1m / 10 ft. (A dimension)
118-E1 12V DC 0.07A 0.84 25.5 92 / 86 1 11/64"118-G1 24V DC 0.03A 0.72 102.0 (30mm)
123A-E5 12V AC 60 Hz 0.4A 4.8 10.0 92 / 86 1 3/16"123A-G5 24V AC 60 Hz 0.2A 4.8 40.0 (30mm)123A-N5 120V AC 60 Hz 0.04A 4.8 1200.0
5-37D
-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Flush mounted, heavy duty buzzer designed for standard outlet box
installation. The 1064 Series are provided with terminals for wiring
connections. The 1065 Series are provided with flying leads for wir-
ing connections
Installs in standard outlet boxes using any standard wall plate.
Low cost, quality buzzer widely used in homes, apartment houses,
plants, and OEMs.
Strap Mounted Buzzer
1064 & 1065 Series
Low power drain
FEATURES
> High voltage
> Adjustable volume
> Zinc-plated finish
> Low power drain permits longwire runs
> 1064 has terminal connectors
> 1065 has flying leads
AGENCY APPROVALS
> UL 464 Listed
1"(25mm)
3 3/4"(95mm)
3 3/16"(81mm)
2 3/8"(60mm)
1 3/8"(35mm)
DC Coil dB atCat No. Volts Amps VA Res (ohms) 1m / 10 ft.
1064-G5 24V AC 50/60 Hz 0.25A 6 36 82 / 761064-N5 120V AC 50/60 Hz 0.05A 6 9251064-R5 240V AC 50/60 Hz 0.025A 6 3600
1065-G5 24V AC 50/60 Hz 0.25A 6 36 82 / 761065-N5 120V AC 50/60 Hz 0.05A 6 9251065-R5 240V AC 50/60 Hz 0.025A 6 3600
Cat. No. 1064
Cat. No. 1064 Shown
5-32
D-0
4
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Designed for standard outlet box installation. Provided with leads
for wiring connections.
Low cost, quality buzzer widely used in homes, apartment houses,
plants, and OEMs.
High Voltage Buzzer
1066 Series
Low power drain
DC Coil dB atCat No. Volts Amps VA Res (ohms) 1m / 10 ft.
1066-G5 24V AC 50/60 Hz 0.25A 6 36 80 / 741066-N5 120V AC 50/60 Hz 0.05A 6 9251066-R5 240V AC 50/60 Hz 0.025A 6 3600
13/16"(21mm)
1 1/4"(32mm)
FEATURES
> High voltage
> Adjustable volume
> Zinc-plated finish
> Low power drain permits longwire runs
AGENCY APPROVALS
> UL Recognized
5-33D
-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
The Edwards 660 Series are compact, strap-mounted buzzers and
bells designed for flush mounting in standard electrical boxes.
Designed for installation in standard outlet boxes. Requires a 590
transformer (page 11-2) and push button. Transformer and
pushbutton may be mounted in same 3 gang outlet box with a mini-
mum depth of 1 3/4" (44 mm) using a Cat. No. 593 transformer
mounting plate (page 11-4).
Used for residential and commercial door signals and interoffice
communications and signaling.
Flush-Call StrapMounted Signals
660 Series
Low voltage
FEATURES
> Low voltage
> Easy flush mounting
A
3 5/8"(92mm)
1 3/4"(44mm)
660/661662 Typical Wiring
Diagram
8/10VAC
115VAC
590Transformer
DC Coil dB atCat No. Name Voltage Current* VA Res. (ohms) 1m / 10 ft. Depth (A)
660 RingcallTM Bell 8-10V AC 1.5A 15 4.75 86 / 80 1 3/8" (35 mm)
661 BuzacallTM Buzzer 8-10V AC 1.3A 13 6 86 / 80 7/8" (22 mm)
662 TucallTM Bell/Buzzer 8-10V AC 1.5A 15 4.75 86 / 80 1 3/8" (35 mm)*Current ratings at 10V AC.
5-39D
-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Edwards B-8698 & B-8699 AdaptaBuzzers are the finest, heavy
duty buzzers available. Sound is produced by the hammer action of
a vibrating armature against the cover and starts and stops instantly
with current impulse. The cover is secured to the unit's cast box by
a cast aluminum threaded ring and sealed with a neoprene gasket.
Two mounting lugs are provided for wall mounting. A 1/2" (13mm)
tapped conduit entrance is provided on one side for field wiring. Wir-
ing connections are made in the base and the cover assembly plugs
into a receptacle in the base.
Ideal for use in areas where a louder signal would be distracting.
Often used for timing, scheduling, paging, and general alarm appli-
cations. Typical indoor and weatherproof installations include con-
struction sites, shipping docks, and paper mills.
AdaptaBuzzerTM
WeatherproofDC & AC Models
DC Coil dB atCat No. Volts Amps VA Res (ohms) 1m / 10 ft.
B-8698-E1 12V DC 1.5 18 4.8 95/89B-8698-G1 24V DC 1.0 24 21.5 75 db min.B-8698-P1 125V DC 0.2 25 103B-8698-S1 240V DC 0.1 24 600
B-8699-G5 24V AC 60 Hz 1.1 26.4 5.0 95/89B-8699-N5 120V AC 60 Hz 0.2 24 146 75 db min.
B-8698 & B-8699 SeriesFEATURES
> Heavy gauge steel cover
> Die cast aluminum housing
> Vibrating armature
> Gray finish
AGENCY APPROVALS
> B-8699 Series UL 464 Listed
> NEMA Type 3R
2 holes3/8" (10mm) dia.
5 1/2"(140mm)
6 3/8"(162mm)
Tap 1/2" (13mm) IP
5 3/8"(137mm)
3"(76mm)
5-29D
-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
The Edwards B-KM-8140 & B-8141 series AdaptaBuzzers are qual-
ity, heavy duty AC & DC buzzers designed for use in hazardous lo-
cations. The sound is produced by the hammer action of a vibrating
armature against the cover. The buzzers are provided with two
mounting lugs for wall mounting. A 1/2" (13mm) tapped conduit en-
trance is provided on one side for field wiring. Wiring connections
are made in the base of the unit and the cover assembly plugs into
a receptacle in the base.
For use in hazardous location areas where a distinctive, lower dB
buzzer signal is required for timing, scheduling, paging, and general
alarm applications. Typical installations include petroleum plants,
gas plants, grain elevators, flour and paper mills, textile plants, and
tankers.
AdaptaBuzzerTM
B-KM-8140 & B-8141
Explosionproof
FEATURES
> Cast aluminum housing andcover
> Corrosion resistant heat flowedpowder epoxy finish
AGENCY APPROVALS
> UL 1203 Listed
2 holes3/8" (10mm) dia.
5 1/2"(140mm)
6 3/8"(162mm)
Tap 1/2" (13mm) IP
5 3/8"(137mm)
3"(76mm)
DC Coil dB atCat No. Volts Amps VA Res (ohms) 1m / 10 ft.
B-KM-8140-G5 24V AC 60 Hz 1.1 19.2 5.0 95 / 89B-KM-8140-N5 120V AC 60 Hz 0.2 24 146 75 dB min.B-KM-8140-R5 240V AC 60 Hz 0.1 24 750
B-8141-G1 24V DC 0.8 19.2 21.5 95 / 89
5-30
D-0
4
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
The Edwards B-8140-M & B-8141-M Mineguard series are quality,
heavy duty buzzers suitable for use on permissible mining equip-
ment. They are available in AC and DC voltages. The sound is pro-
duced by the hammer action of a vibrating armature against the cast
aluminum cover. A one piece cast aluminum cover provides an effec-
tive explosion-proof seal; the seal is secured by a hex screw in the
cover. For power connections, the unit features an installed 33"
(84mm) power cord and conduit hose constructed of flame retardant
neoprene. The buzzer is provided with two mounting lugs for wall
mounting.
For use in all mining applications. Designed to withstand the con-
stant vibration associated with mining equipment such as loaders,
carriers, and conveyors.
MineguardTM
Mine Buzzers
B-8140-M & B-8141-M
MSHA Certified
FEATURES
> Heavy duty cast aluminumhousing and cover
> Corrosion resistant heat flowedpowder epoxy finish
AGENCY APPROVALS
> MSHA Certified No. X/P-3116-1
> Conforms with MSHA 30 CFR,Part 18 for methane and airmixtures
2 holes3/8" (10mm) dia.
5 1/2"(140mm)
6 3/8"(162mm)
Tap 1/2" (13mm) IP
5 3/8"(137mm)
3"(76mm)
DC Coil dB atCat No. Volts Amps VA Res (ohms) 1m / 10 ft.
B-8140-M-G5 24V AC 60 Hz 1.1 19.2 5.0B-8140-M-N5 120V AC 60 Hz 0.2 24 146 95 / 89B-8140-M-R5 240V AC 60 Hz 0.1 24 740
B-8141-M-G1 24V DC 0.8 19.2 21.5 95 / 89B-8141-M-S1 250V DC 0.1 25 600
5-31D
-04
© Copyright 2004 Edwards
90 F ie ldstone Cour t ||||| Cheshi re , CT 06410Ph : 203 .699 .3300 ||||| Fx : 203 .699 .3108
www.edwards-s ignals.com
BELLS & BUZZERS
Edwards Lumatone signals are designed to demand attention in
quiet and moderate noise areas. The signal’s output can be varied
by controlling the applied voltage. The signal’s low power consump-
tion makes them suitable for battery operated equipment and allows
them to be turned on and off by integrated circuits, SCRs and tran-
sistors.
Simply unscrew front housing and insert threaded portion through a
1 5/32" (29mm) panel hole. Screw front housing back on. Signal can
accommodate panel thickness up to 3/16" (5mm).
Used for security systems, computers, appliances and industrial,
process control, communication and restaurant equipment.
Lumatone®
Electronic Signals
E100 Series
Audio or Audio/Visual
1.44"(37mm)
1.75"*(44mm)
1.31"(33mm)
1.64"(42mm)
*Does not includepanel thickness
Max. Operating Pulsating LEDCat No. Description Voltage Current VA Rate IntensityE102A Steady audio 12V DC 10 mA 0.12 N/A N/A
24V DC 18 mA 0.44 N/AE103A Pulsating audio 12V DC 10 mA 0.12 90 N/A
24V DC 18 mA 0.44 60E104A Steady visual/audio 12V DC 16 mA 0.20 N/A 1.3 mcd
24V DC 30 mA 0.75 N/AE105AE Pulsating visual/audio 12V DC 16 mA 0.20 90 1.3 mcd
24V DC 30 mA 0.75 60
FEATURES
> Low cost and size
> Solid state, long life
> High impact polystyrene case
> Pulsating audio or audio/visualmodels available
> Terminal connections
SPECIFICATIONS
> Operating temperature range:-32° to 131°F (-0 to 55°C)
> Frequency: 2.8 kHz
6 8 10 12 14 16 18 20 22 24
DECIBELS VS. VOLTAGE FOR LUMATONE AUDIO SIGNALSTypical at Normal Temperature
100
90
80
70
60
Volts DC
dB a
t 1
foot
5-38
D-0
4