add your custom bsp component as a link in a work center
TRANSCRIPT
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 1/12
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 2/12
Step 2 - Register your component in the repository
Next up, you must make your component known to the system. In IMG configuration, navigate to "Define Work Area
Component Repository" as shown below.
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 3/12
;
Create New entries as shown below.
Now, add the inbound plug info. For our purposes, we need not specify an outbound plug.
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 4/12
Now, you may realize why we added the inbound plugs while specifying the component interface. Each inbound plug is
attached with an action and you may write code in the plug, specific to the object action. Though the Target ID is mandatory,
specifying inbound plug/object action is optional. While dynamically navigating to a component or loading the component via
work center link, the object action may be specified and the corresponding plug will be called. This will be explained in
another wiki.
Step 3 - Specify Navigation Bar Profile
Go to the IMG node "Define Navigation Bar Profile" as shown below.
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 5/12
First, create a Logical Link as shown below. Specify Logical Link ID, use the Target ID that you created in Step 2.
Next, create a "Work Center Link Group" .
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 6/12
Add logical links to the work center link group.
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 7/12
Next, choose an existing work center, for example, the "Sales Cycle"
Assign the work center link group that you created below the work center.
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 8/12
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 9/12
Select a business role, for example, "Sales Pro"
Enable the Links
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 10/12
Test
I messed up a bit with this screen shot. I forgot to take the screen cap before I rolled back the changes. I have altered the
screen using MS paint, but rest assured that the link will show up. The final screen shot shows the loaded component in web
ui. It is a test search page component. We have added the custom component as a link in an existing work center(Sales
Cycle). However, you can create your own work center or make use of the standard work centers. For example to get the
"group links", you may reuse the logical link id "WCACLACLA". You may need to tweak it though.
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 11/12
7/31/2019 Add Your Custom BSP Component as a Link in a Work Center
http://slidepdf.com/reader/full/add-your-custom-bsp-component-as-a-link-in-a-work-center 12/12