SERVICECAPABILITIES

CALIBRATION

00.0

COMMISSIONINGTESTING MAINTENANCEINSTALLATIONDESIGN SWITCHING & MANUFACTURING

OVERVIEWADDELEC POWER SERVICES PRIDES ITSELF ON PROVIDING A FULL-SERVICE SOLUTION FOR ALL YOUR INDUSTRIAL ELECTRICAL NEEDS.

Addelec was founded in 2006. In 2019 the company was acquired by Australian owned IPD Group, joining previously acquired companies Hivotech, Central Test and Zinfra HV Test.

The result being a highly qualified team operating nationally with dedicated branches in New South Wales, Victoria and Tasmania.

Services include high and low voltage electrical works, associated civils, level 3 design, installation, maintenance, commissioning, testing, equipment repairs and NATA accredited calibrations.

Addelec operates by working collaboratively with the customer, bringing experience and expertise to any project including design recommendations, project management and final commissioning compliance reports.

Addelec will help to optimise the value within your project scope whilst mitigating risk.

DATA CENTERS EDUCATION INDUSTRIAL SITES SUBSTATIONS MINES/POWER STATIONSTRANSPORTATION UTILITIES

ACCREDITATIONSAddelec is authorised and accredited in the following disciplines:

NATA accredited calibration service

High voltage installation for Endeavour Energy, Ausgrid and Sydney Water

Testing for Endeavour Energy and Sydney Water

Pre-commissioning and commissioning for Endeavour Energy and Sydney Water & Sydney Catchment Authority

Accredited for cable jointing up to 132kV, combined with level 1 and level 2 electrical installations and line-work

Electricity distribution network design for Ausgrid and Endeavour Energy

Electricity distribution and sub-transmission design for Essential Energy

ISO accreditation ISO 14001:2015, ISO 9001:2015, AS/NZ 4801:2017

Compliance with NSW government work health & safety management systems (WHSMS) guidelines (Edition 5)

Victoria Electricity Supply Authority (VESA) compliant

Addelec Power Services are qualified, trained and experienced to work across a broad range of industries. INDUSTRIES WE SERVE

Our in-house electrical engineers are experienced designers in all areas across the electrical industry. They can take responsibility for conducting initial concept through to final design.

Level 3 design capabilitiesUrban residential, commercial and industrial subdivisionsUrban commercial and industrial connections of loadRural connectionsElectricity network asset relocationsMajor (High voltage) customer connectionsPublic lighting designPublic & private networks

DESIGN

Addelec Power Services provide a wide range of installation services in both the public and private sector. Authorised on NSW distribution networks for level 1 and 2 contestable works.

We are experienced in managing projects on established and green field sites from development to completion.

Services include:

Addelec has an experienced in-house civils crew for: Contestable works level 1 & level 2

Offsite preparation including factory builds and panel wiringSite preparation with in-house civil crewProject managementHigh voltage switch room and switchyard installationsLow Voltage generator & changeover switch installations

High voltage switchgear assembly, installation and testingLow voltage switchboard manufacture, installation, test and commissionHV and LV equipment installation including control and measurementLow voltage switchboard manufacture, installation, test and commission

Underground reticulation systems including pit & pipeExcavation and trenchingEarthingPole placementConcreting to support electrical works i.e. padmounts etc Service location

High voltage cable jointing and termination up to 133kVAccredited for Pfister, Subkabel products and XLPE terminationsInstallation of incoming HV supply (underground and overhead)Cabling, lighting and power installation

INSTALLATION

The integrity of any electrical installation once established cannot simply be taken for granted. Every electrical system no matter how good the initial installation, undergoes changes and deterioration throughout its lifetime.

In many cases these changes are not formally planned and managed, and their cumulative effect on the overall installation can give rise to problems.Addelec Power Services can tailor a comprehensive asset management and maintenance system to maximise productivity and reduce down time.

We have qualified crew of HV technicians who provide a range of maintenance services which include:

High voltage overhead linesHV substations (including circuit breakers and switchboards)High and low voltage transformersLow voltage plant and equipmentAddelec also offer 24/7 Emergency Response service

MAINTENANCE

Addelec have a state of the art purpose built stick refurbishment facility with a temperature, humidity and dust controlled environment to ensure the quality of the refurbishment is maintained year round.

Our experienced staff can repair a vast array of electronic instruments and safety equipment, including:

REPAIRSInstrument repairs and adjustmentsPETE repairsHV equipment repairsFibreglass refurbishments

The experienced team at Addelec Power Services are able to deliver professional testing and commissioning support on low and high voltage systems.Our high voltage engineers are well-equipped to test and commission all the equipment within your electrical transmission and distribution infrastructure, supplying comprehensive reports to authenticate our work.

Addelec Power Services can offer the following competencies :

HV Testing of Primary Equipment

Power transformer testingCurrent and voltage transformer testingCircuit breaker testingEarthing system testingHigh voltage cable testingHigh voltage insulation resistance testingPower frequency testingPrimary injection testingGenerator testing and commissioning

HV Testing of Secondary Equipment

Factory acceptance testing of protection & control relaysSite acceptance testing of protection & control relaysProtection scheme cut over and functional testingSatellite synchronisation equipment providing multiple end line protection testingFault recording & play back facilitiesRoutine protection system maintenanceProtection settings & test record database management

HV Commissioning

Secondary system design reviewAuditing of commissioning processesContract liaisonSystem outage co-ordinationInspection and test plan developmentCo-ordination with external requirements (AEMO)Site and project management

PROTECTION, TESTING & COMMISSIONING

Addelec regularly service the following equipment:

Safety and accuracy are paramount when it comes to electrical equipment, so it is important to ensure your tools are calibrated regularly and properly.Addelec Power Services can fully manage your testing and calibration requirements to ensure your safety and compliance, from initial test and calibration right up to record keeping and subsequent rescheduling, keeping ahead of all your audit requirements.

HV SAFETY EQUIPMENT CALIBRATIONS & TESTING

Multi-metersIR testers to 10kVCircuit breaker analyser,VLFClamp & multimetersVolt & ammetersInsulation testersEarth testersLoad & power quality loggers

Oil sample testersIR thermometersCable fault locatorsBattery load unitsEWPsHV indicators - modiewarksLive line gloves, mats, sticks & sleeves

Partial discharge unitsThermal camerasTransformer turns ratio meterCheck, update and restock LV rescue kitsCleaning of EWP live line trucks and associated equipmentRCD testingLead test & tag

SAFETY PRODUCT SALESInsulation testers / MeggerNeutral & Supply Testers Gloves & Sleeves

Earth Leads & Earth TestersOperating Sticks & AttachmentsMultimeters / Clamp Meters

Addelec Power Services are not only able to manufacture a range of products as per thelist below but also innovate and design products to meet your specific requirements.

Addelec offer repairs and servicing of all the items that we manufacture and offer on-going routine testing, servicing and maintenance to relevant standards

MANUFACTURE HIVOTECH 1500DC tester1500VDC short circuits and earths plus bagsHV earths & earthing kitsFully customisable HV operating sticksDischarge sticksOperating heads and adaptors including discharge heads

Modiewark adaptorsMeasuring sticksLV grab sticksOperating glove bagsDC tester kit bags

SWITCHING SERVICESWorking with high voltage equipment is a delicate process and requires patience, knowledge and skill which only those who have gone through the proper training will have.Addelec have a team of qualified HV switching operators who are able to:

Prepare high voltage switching plans Provide reliable switching and issuing of access permits

FOR MORE DETAILS CONTACT

ADDELEC POWER SERVICES PTY LTD

1300 795 262 | 1300 556 601 info@addelec.com.au www.addelec.com.au

Burnie Services

Keysborough Services

Wetherill Park &Campbelltown Services

BendigoServices

Perth ServicesAdelaide Services

Brisbane Services

Darwin Services