adhesion society final program

PresidentAnand JagotaLehigh University

Immediate Past PresidentKenneth ShullNorthwestern University

Vice PresidentGreg SchuenemanUSDA Forest Products Lab.

SecretaryLeonardo LopezDow Chemical Company

TreasurerCharles ShusterFranklin International Inc.

2015 Program Chair/EditorCarlos Barrios, 3M Company

Members at LargeJoelle FrechetteJohns Hopkins UniversityCharles PaulHenkel Corporation

Structural Adhesives Division ChairAlojz IvankovicUniversity College Dublin, Ireland

Soft Adhesives Division ChairDavid Yarusso, 3M Company

Home Office Manager/Onsite ContactMalinda Armstrong, The Adhesion Society

ExECuTIVE COMMITTEE

2015 ExHIbITOrS• ASI Magazine• IMASS Inc.• KruSS uSA• Kyowa Interface Science Co., Ltd.• Macromolecules and Interfaces Institute

at Virginia Tech• Netzsch Inc.• Synasia Inc.

GENErAL INfOrMATIONfinal Program ContentExecutive Committee & General Information ...................................... page 1Sunday Schedule & Award Sponsors .................................................. page 2 Monday Schedule .............................................................................. page 3Poster Session & Reception ............................................................... page 7Tuesday Schedule .............................................................................. page 9Wednesday Schedule ....................................................................... page 13

registration/Information Hoursboardroom A foyer, first floorSunday, February 22 Noon – 5:00 p.m.Monday, February 23 7:00 a.m. – 5:00 p.m.Tuesday, February 24 7:00 a.m. – 5:00 p.m.Wednesday, February 25 7:00 a.m. – Noon

Atrium, first floor

1 The Adhesion Society 2015 Please recycle this program when done.

Proceedings* In keeping with the continuing efforts to make our event more environmentally friendly, hard copies of presentations will not be available. You can locate the proceedings either on CD which was included in your packet or on the Adhesion Society website.

*Not all presenters have authorized the Adhesion Society to publish their abstract.

AwArD SPONSOrSA special “THANK YOU” to our generous sponsors of the following awards: • Adhesion Society Award for Excellence in

Adhesion Science sponsored by 3M • The robert L. Patrick fellowship Award

sponsored by The Adhesion Society • Distinguished Paper Award sponsored by the Henkel • Peebles Awards for Graduate Student

research in Adhesion Science • Alan Gent Distinguished Student Paper Award

sponsored by Henkel • best Poster Award sponsored by Avery Dennison • Adhesion Society Young Scientist Award

sponsored by the Adhesive & Sealant Council

38th Annual Meeting Final Program 2

Noon to 5:00 p.m. Registration Boardroom A Foyer, First Floor

1:30 to 4:45 p.m. 2015 Award for Excellence in Adhesion Society Symposium

Sponsored by 3M – Honoring Kenneth Liechti, University of Texas at Austin

Ballroom C, First Floor

3:00 – 8:30 p.m. Exhibition Atrium, First Floor5:00 – 6:00 p.m. Business Meeting Ballroom C, First Floor6:30 – 8:30 p.m. Presidents Reception & Exhibits Riverwalk (weather backup Atrium, First Floor)

1:30 p.m. Introductory Remarks Dave Reedy, Sandia National Laboratories

1:45 p.m. Fracture Tests and Analysis Kai-Tak Wan, Northeastern University

2:15 p.m. A Simple Mixed-Mode Dependent CZM with Illustrative Examples

David Reedy, Sandia National Laboratories

2:45 p.m. Interface Adhesion and Fracture in Nanomanufacturing Processes

Kevin Turner, University of Pennsylvania

3:15 p.m. Interfacial Adhesion of Graphene by Multiscale Models

Rui Huang, University of Texas at Austin

3:45 p.m. brEAK

4:15 p.m. From Interfacial Fracture Mechanics to Adhesive Interactions

Kenneth Liechti, University of Texas at Austin

9:00 to 9:30 a.m. Keynote

Solutions for Adhesion UnderwaterArauzazu del Campo, Max Planck Institut für Polymerforschung

9:30 to 10:00 a.m.Geckos as Springs: Decreased Compliance Enables Larger Geckos to Climb WallsDuncan Irschick, University of Massachusetts

10:00 to 10:30 a.m.Effect of Nitro-Group Functionalization on the Cross-linking and Bioadhesion of Biomimetic Catechol-Based AdhesiveBruce Lee, Michigan Technological University

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Nanotextured Adhesives from Colloidal TemplatesMarleen Kamperman, Wageningen University

11:30 a.m. to NoonSwitchable Dry Adhesion Using Shape Memory PolymerBabak Soltannia, University of Alberta

Noon to 12:30 p.m.A Blood-Resistant Surgical Glue for Minimally Invasive Repair of Vessels and Heart DefectsYuhan Lee, Brigham and Women’s Hospital


Adhesive Contact of a Rigid Sphere to a Soft Elastic Substrate – the Role of Surface TensionChung Yuen Hui, Cornell University

9:30 to 10:00 a.m.Enhancement of Friction against a Rough Surface by a Ridge-Channel Surface MicrostructureAnand Jagota, Lehigh University

10:00 to 10:30 a.m.On Adhesion Mechanisms and Erosions Effects of Nanoparticle-Suspensions (Nanofluids) on Cooling System MaterialsGustavo Molina, Georgia Southern University

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Extracting Rate Dependent Traction Separation Relations for Cracks/Interfaces in Viscoelastic MediaNaga Sundeep Palvadi, The University of Texas at Austin

11:30 a.m. to NoonOut-of-Contact Elastohydrodynamic Deformation of ElastomersJoelle Frechette, Johns Hopkins University

7:00 a.m. – 5:00 p.m. Registration Boardroom A Foyer, First Floor

7:00 – 7:45 a.m. Networking Breakfast Atrium, First Floor

8:00 – 8:45 a.m. Plenary Talk I: Biomimetic Adhesive Microstructures as an Approach to Understand Functioning of Biological Systems

Stanislav Gorb, Zoological Institute of the University of Kiel


3 The Adhesion Society 2015

Morning Technical Sessions – 9:00 a.m. to 12:30 p.m.

bioinspired Adhesion I: Synthetic DesignBallroom C, First FloorSession Chair: Alyssa Stark, University of Louisville

friction & Adhesion Ballroom D, First FloorSession Chair: Ali Dhinojwala, The University of Akron & Noshir Pesika, Tulane

4


Structural Adhesives IBallroom E, First FloorSession Chair: Alojz Ivankovic, University College Dublin

Natural Phenomena I: Natural SurfacesPlaza Meeting Room, First FloorSession Chair: Christopher Wohl, NASA Langley Research Center


Fracture Behavior of Epoxy-Matrix Hybrid NanocompositesRaymond Pearson, Lehigh University

9:30 to 10:00 a.m.Sand Particles Biocement Interface and Its Influence on CementingChunxiang Qian, Southeast University

10:00 to 10:30 a.m.Investigation of the Influence of Humidity and Temperature on the Crack Growth in Adhesively Bonded Joints under Cyclic LoadPaul Ludwig Geiss, University of Kaiserslautern

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Crash-Proof Bonding of FRP‘s with 2 Component Adhesives in the BIW ShopStefan Bohm, University Kassel

11:30 a.m. to NoonA Unifying Local-Global Partitioning Theory based on Global Cohesive Zone SolutionMark Conroy, University College Dublin

Noon to 12:30 p.m.Synergistic Effects in the Fracture Performance of Epoxy Polymers Modified with Silica and Silicone NanoparticlesDeclan Carolan, Imperial College London


Coatings for the Prevention of Ice-Accretion and Insect- Contamination - Approaches, Examples and LimitationsVolkmar Stenzel, Fraunhofer IFAM

9:30 to 10:00 a.m.Contaminant Adhesion to Exterior Aircraft SurfacesJill Seebergh, The Boeing Company

10:00 to 10:30 a.m.Effect of Cruise Conditions on Insect Residue AdhesionSonia Tulyani, United Technologies Research Center

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Flight Testing Surfaces Engineered for Mitigating Insect Adhesion on a Falcon HU-25CMichelle Shanahan, National Institute of Aerospace

11:30 a.m. to NoonInfluence of Surface Wetting on Hemolymph Drop Impact AdhesionEric Loth, University of Virginia

12:30 to 1:30 p.m. – Lunch on Your Own

12:30 to 1:30 p.m. – Soft Adhesives Division Meeting Johnson Meeting Room, Second Floor

12:30 to 1:30 p.m. – Structural Adhesives Division Meeting Johnson Meeting Room, Second Floor

1:30 to 2:00 p.m.Nanoscale Adhesion and Mechanical Properties of Bamboo MicrofibrilsNima Rahbar, Worcester Polytechnic Institute

2:00 to 2:30 p.m.A Computational Multiscale Approach for the Modeling of Fibrillar AdhesivesJanine Mergel, RWTH Aachen University

2:30 to 3:00 p.m.Environmental Influences on the Extensibility of Orb-Weaving Spiders’ Adhesive, Viscous DropletsSarah Stellwagen, Virginia Tech

3:00 to 3:30 p.m.brEAK

3:30 to 4:00 p.m.Effect of Roughness on Adhesion of Bioinspired Gecko Mimicking Adhesive SystemsViktoriia Barreau (Boiko), INM – Leibniz Institute for New Materials and Saarland University

4:00 to 4:30 p.m.Biomimetic Wall-Shaped Hierarchical Microstructure for Gecko-Like AttachmentMichael Varenberg, Georgia Institute of Technology

4:30 to 5:00 p.m.The Effect of Temperature and Humidity on Gecko-Inspired Synthetic AdhesivesAlyssa Stark, University of Louisville

5:00 to 5:30 p.m.Viscous Contribution to Peeling AdhesionJoelle Frechette, Johns Hopkins University

1:30 to 2:00 p.m.Damage Behavior of Core Shell Rubber Particles Toughened Epoxy Adhesives Using J-CDNT Test Dong Quan, University College Dublin

2:00 to 2:30 p.m.Load Induced Hydrodynamic Lubrication of Porous FilmsTushar Khosla, Tulane University

2:30 to 3:00 p.m.The Role of Water in Adhesion and Friction Adrian Defante, University of Akron


3:30 to 4:00 p.m.Detection of Adhesive Disbonds through Structural Health MonitoringWilliam Roth, University of South Carolina

4:00 to 4:30 p.m.Toughened Epoxy Systems via Incorporation of Partially-Reacted SubstructuresMajid Sharifi, Drexel University

4:30 to 5:00 p.m.Debonding of an Elastomeric Layer from a Flexible Plate Using Cohesive Zone ModelBikramjit Mukherjee, Virginia Tech

5:00 to 5:30 p.m.Experimental Investigation of Maximal Adhesion of Bio-Inspired Micro-Fiber Adhesives with Mushroom Shaped Tip EndingsSukho Song, Carnegie Mellon University

Afternoon Technical Sessions – 1:30 p.m. to 5:30 p.m.

bioinspired Adhesion II: Synthetic TestingBallroom C, First FloorSession Chair: Joelle Frechette, Johns Hopkins University

Alan N. Gent SessionBallroom D, First FloorSession Chair: Gregory Schueneman, USDA Forest Products Laboratory & Charles Paul, Henkel Corporation



1:30 to 2:00 p.m. Keynote

Is Anionic Polymerization Dead or Radically Changing?Timothy Long, Virginia Tech

2:00 to 2:30 p.m.Prevention of Cathodic Delamination of Polyurethane Adhesive from Ti-Al6-4V Alloy Using Fluorinated PrimersAndrew Gilpin, University of Cincinnati

2:30 to 3:00 p.m.Hot Melt Adhesives Using New Metallocene Propylene Performance PolymersJennifer Austin, ExxonMobil Company


3:30 to 4:00 p.m.3D Printing Hierarchical Polymeric Structures for Tissue Scaffolding and Cell AdhesionAlison Schultz, Virginia Tech

4:00 to 4:30 p.m.Adhesion Properties of Dopamine-Based Biodegradable Amino Acid-Based Poly(ester urea)sMatthew Becker, The University of Akron

4:30 to 5:00 p.m.Poly(p-diphenylphosphino styrene): Phosphonium Formation and Anion ExchangeChainika Jangu, Virginia Tech

5:00 to 5:30 p.m.Physically Cross-linked Acrylics with Enhanced Mechanical Strength and Processability: From DNA to Supramolecular Pressure Sensitive AdhesivesKeren Zhang, Virginia Tech

1:30 to 2:00 p.m.Ice Adhesion: Science and Applications Victor Petrenko, Dartmouth College, Thayer School of Engineering

2:00 to 2:30 p.m.Development of Materials and Simulation Models for Ice MitigationRichard Kreeger, NASA Glenn Research Center

2:30 to 3:00 p.m.Adhesion of Ice to Polymer Surfaces: A New Laboratory Test Provides Insights Concerning Physical and Mechanical Properties Favoring Easy Release Kenneth Wynne, Virginia Commonwealth University


3:30 to 4:00 p.m.Accreted Ice Adhesion MeasurementCaroline Laforte, Université of Québec at Chicoutimi

4:00 to 4:30 p.m.Anti-icing Focused Low Adhesion Polymer CoatingsAdam Gross, HRL Laboratories, LLC

4:30 to 5:00 p.m.Slippery Liquid-Infused Porous Surfaces (SLIPS) as Icephobic MaterialsPhilseok Kim, Harvard University

5:00 to 5:30 p.m.The Effect of Surface Chemical Functionality upon Ice AdhesionJoseph Smith, NASA Langley Research Center

Novel ChemistriesBallroom E, First FloorSession Chair: Tim Long, Virginia Tech & Stephen Willging, H.B. Fuller Company

Natural Phenomena II: Ice Adhesion PreventionPlaza Meeting Room, First FloorSession Chair: Douglas Berry, The Boeing Company


1. Lubricating Flows by Sheathing Solid Surfaces Glen McHale, Northumbria University

2. Measuring Contact Angles Inside of Capillary Tubes with a Tensiometer Chuck Extrand, Colder Products Company (CPC)

3. Influence of Surface Properties and Impact Conditions on Adhesion of Insect Residues Christopher Wohl, NASA Langley Research Center

4. The Surface Protective Tape Properties on the Variety Surface of the Metal Plate Adhered Young Soo Na, Segye Chemical industry Co. Ltd.

5. Novel Methods for Understanding the Evolution of Gecko Toepads Duncan Irschick, University of Massachusetts at Amherst

6. Deformation of a Confined Elastic Layer Using a Flat Punch in Shear Michael Imburgia, University of Massachusetts

7. Fracture-Healing Kinetics of Physically Associating Thermoreversible Gels Travis Thornell, Purdue University


6:30 to 8:30 p.m. Atrium, First Floor


8. Non-Isocyanate Urethane Engineered Hydrogels for Anti-fouling Applications Laura Villada, University of Florida

9. Random Acrylate Copolymer Surface Grafting to Poly(dimethyl siloxane) Elastomer Surfaces for Controlling Bio-Adhesion Cary Kuliasha, University of Florida

10. Characterizing the Effect of Bondline Thickness on Mixed Mode Fracture of Adhesive Joints Ivan Vu, Virginia Polytechnic Institute and State University

11. Cocrystallization in Hot Melt Adhesives Charles Paul, Henkel Corporation

12. Hybrid Curable OCA for New Assembly Line of Touch Screen Panel Hyun-Joong Kim, Seoul National University

13. Evaluation of UV-Curing Kinetics of the UV Polymerized Adhesives with Poly(ethylene glycol) Dimethacrylate Ji-Won Park, Seoul National University

14. The Effect of Weight Reduction by Dispensing Striped Adhesive to the Honeycomb Sandwich Panel 3 Koji Kamiyama, Mitsubishi Electric Corporation

15. 3D-Printed Biodegradable Polyester Tissue Scaffolds for Cell Adhesion Justin Sirrine, Virginia Tech

9:00 to 9:30 a.m.Contact Formation Between Adhesive Micro-Patterned Elastomer SurfacesLiliane Leger, Université Paris-Sud

9:30 to 10:00 a.m.Visualizing the Deformation of the Interface of a Single Fiber Silk CompositeChelsea Davis, National Institute of Standards and Technology

10:00 to 10:30 a.m.Adhesion Enhancement Between a Gel and Elastomer by Shape Complementarity AdhesiveDadhichi Paretkar, Lehigh University

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.The Effect of Tip Size on the Adhesion Strength of Bioinspired Mushroom Like FibersBurak Aksak, Texas Tech University

11:30 a.m. to NoonMechanical Comparison of Bio-Composites Based on Chitosan and Alginate with Potencial as Bone Adhesive for Trauma SurgeryFrancisco Javier Cedano Serrano, Universidad de Los Andes

9:00 to 9:30 a.m.Stiff Particles on Compliant Substrates: Adhesion or Wetting?Katharine Jensen, Yale University

9:30 to 10:00 a.m.Formulating Polymer Adhesive Blends Using Electrospinning ProcessShing-Chung Wong, University of Akron

10:00 to 10:30 a.m.Development of Novel Waterborne Functional Polyolefin Primers/ AdhesivesGrace Wan, Dow Chemical Company

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Synthesis and Evaluation of Hybrid Curing OCA Using UV PolymerizationHyun-Joong Kim, Seoul National University

11:30 a.m. to NoonLeveraging Sustainable Materials in Hot Melt AdhesivesCharles Paul, Henkel Corporation



8:00 – 8:45 a.m. Plenary Talk II: Molecular Nanoparticles Are Unique Elements for Macromolecular Science

Stephen Cheng, The University of Akron Ballroom C, First Floor


bioinspired Adhesion III: Synthetic Testing Ballroom C, First FloorSession Chair: Burak Aksak, Texas Tech University

Soft Materials I: Chemistry & Interfaces Ballroom D, First FloorSession Chair: Eric Silverberg, Henkel Corporation



9:00 to 9:30 a.m.Mechanical and Cathodic Delamination Inhibiting Properties of Atmospheric Pressure Plasma Polymerized HMDSOBing Han, University of Cincinnati

9:30 to 10:00 a.m.Modelling Fatigue Crack Growth in Structural Adhesive JointsTony Kinloch, Imperial College London

10:00 to 10:30 a.m.Elevated Temperature Adhesion Testing of Spray-Applied Fire- Resistive MaterialsChris White, National Institute of Standards and Technology

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Design of Cold-Bonded FRP-Steel HybridsKatharina Henkel, University of Paderborn

11:30 a.m. to NoonInfluences of Manufacturing, Process Parameters and Their Tolerances on the Crash-Behavior of Adhesive Bonds - Experimental and Numerical InvestigationGeorg Schwarzkopf, University of Kassel

Noon to 12:30 p.m.Calculation of High Cycle Fatigue Behaviour of Structural Adhesive JointsAndreas Wulf, Fraunhofer-IFAM

9:00 to 9:30 a.m.The Flame Treatment of Injection Molded Polypropylene: New Insights on an Established ProcessJohn Watts, University of Surrey

9:30 to 10:00 a.m.The Interaction of MDI with Stainless Steel: The Role of Water in the Formation and Destruction of Interfacial BondsSabrina Tardio, University of Surrey

10:00 to 10:30 a.m.The Interaction of MDI with 316L Stainless Steel and Constituent MetalsMarie-Laure Abel, University of Surrey

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Laminated Glass: Dynamic Rupture of Adhesion Between Glass and PVBPaul Elziere, Saint-Gobain/SIMM - ESPCI ParisTech

11:30 a.m. to NoonSimple and Improved Approaches to Long Lasting, Hydrophilic Silicones Derived from Commercially Available PrecursorsWei Chen, Mount Holyoke College

Noon to 12:30 p.m.Hydrophobicity on Aerospace Glass WindowsFrank Nguyen, PPG Aerospace

Structural Adhesives IIBallroom E, First FloorSession Chair: Xing Yang, Virginia Tech

Interfacial Phenomena Plaza Meeting Room, First FloorSession Chair: Anish Kurian, 3M Company

12:30 to 1:30 p.m. – Lunch on Your Own

12:30 to 1:30 p.m. – 2016 Program Planning MeetingJohnson Meeting Room, Second Floor




Molecular Dynamics Simulation of Fracture Initiation at a CornerMark Stevens, Sandia National Laboratories

2:00 to 2:30 p.m.Bioinspired Adhesive and Computa-tional Design of Interfacial MaterialsZhao Qin, MIT

2:30 to 3:00 p.m.Rate Dependent Fracture Considering Polymer Chain Reforming Within an Adhesive Zone ModelShawn Lavoie, University of Alberta


3:30 to 4:00 p.m.Assessment of Interface Energy in High Velocity Particle ImpactsSinan Muftu, Northeastern University

4:00 to 4:30 p.m.Finite Volume Adaptive Concurrent Multiscale Model for Damage Propa-gation in Heterogeneous StructuresZeljko Tukovic, University College Dublin

4:30 to 5:00 p.m.Smoothing of Contact Lines in Spreading Droplets by Trisiloxane SurfactantsAhmed Ismail, RWTH Aachen University

5:00 to 5:30 p.m.Surface Wetting and Dynamics of Nanoscale Droplets: Effect of Surface ChemistryMesfin Tsige, The University of Akron


Ultra-High-Speed Imaging of Rapid Tape PeelingSigurdur Thoroddsen, King Abdullah University of Science and Technology

2:00 to 2:30 p.m.Peeling Angle and Inertia Effects on Stick-Slip Peeling DynamicsLoic Vanel, Université Claude Bernard Lyon 1

2:30 to 3:00 p.m.Influence of Large Strain Rheology on the Adhesive Performances of PSAMatteo Ciccotti, ESPCI Paristech


3:30 to 4:00 p.m.Linear Rheology and Adhesive Prop-erties of Bis-Urea Functionalized Supramolecular Poly(butylacrylate)sCostantino Creton, ESPCI ParisTech

4:00 to 4:30 p.m.Synthesis of Curdlan Derivatives Regioselectively Modified to Interact with ProteinsJoyce Kuang, Virginia Tech

4:30 to 5:00 p.m.Time Dependent Behavior of a Dual Cross-Link Self-Healing Gel: Theory and ExperimentsChung Yuen Hui, Cornell University


Computational ModelingBallroom C, First FloorSession Chair: Mesfin Tsige, The University of Akron

Soft Materials II: PSAsBallroom D, First FloorSession Chair: David Yarusso, 3M Company


Liquid-in-Fluid DielectrowettingGlen McHale, Northumbria University

2:00 to 2:30 p.m.Air Retaining Surfaces: Backswimmers and Floating Ferns Inspire Ships to Save FuelMatthias Mail, University of Bonn

2:30 to 3:00 p.m.Characteristics of Reactive-Wetting at Room Temperature Adhesive, Viscous DropletsHaim Taitelbaum, Bar-Ilan University


3:30 to 4:00 p.m.Silicon-Containing Reagents to Control Properties of Inorganic Surfaces: Some Overly Complicated Systems and Some Very Simple SystemsThomas McCarthy, University of Massachusetts

4:00 to 4:30 p.m.Super-Hydrophilic Surfaces by Photo-Induced Micro-FoldingThomas Bahners, Deutsches Textilforschungszentrum Nord-West

4:30 to 5:00 p.m.Facile and Eco-Friendly Synthesis of Stimulus-Responsive Superoleophobic Polymer BrushesAtsushi Hozumi, National Institute of Advanced Industrial Science and Technology (AIST)

5:00 to 5:30 p.m.Repellency of the Lotus Leaf: Contact Angles, Drop Retention and Sliding AnglesChuck Extrand, Colder Products Company (CPC)


Neutron Reflectivity as a Tool to Study the Interdigitation of Grafted Polymer Chains and its DynamicssFrédéric Restagno, Université Paris-Sud

2:00 to 2:30 p.m.Polymer Brush Conformation and Adhesion Behavior Using Quartz Crystal MicrobalanceJohn Howarter, Purdue University

2:30 to 3:00 p.m.Applications of Quartz Crystal Resonators in Tracking Viscoelasticity and Degradation ProcessesJoshua Yeh, Northwestern University


3:30 to 4:00 p.m.Constitutive Relations and Parameter Estimation for Finite Deformations of Viscoelastic AdhesivesRomesh Batra, Virginia Tech

4:00 to 4:30 p.m.Monitoring Sealant Durability during Instrumented Outdoor Exposure with Variation in PrestrainGregory Schueneman, USDA Forest Service Forest Products Laboratory

4:30 to 5:00 p.m.Rheological Analysis of the Gelation of a Thermoset Epoxy AdhesivePaul Ludwig Geiss, University of Kaiserslautern

5:00 to 5:30 p.m.Mechanical and Structural Charac-terization of Polyamide Thin-Film Composites for Water DesalinizationShawn Chen, Northwestern Universityty

12


Surface-Liquid Interactions Ballroom E, First FloorSession Chair: Chuck Extrand, Colder Products Company (CPC)

Measurement & Characterization IPlaza Meeting Room, First FloorSession Chair: Chelsea Davis, National Institute of Standards and Technology


9:00 to 9:30 a.m.Learning New Adhesion Lessons from BioparticlesCarson Meredith, Georgia Tech

9:30 to 10:00 a.m.An Anti-Biofouling Strategy Using Curvature Controlled Surface TopographiesMehdi Kargar, Virginia Tech

10:00 to 10:30 a.m.The Effect of Surface Free Energy of the Substrate on Traction Force by the Longicorn BeetleMari Nakamoto, University of Tokyo

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Contact Mechanics of Mushroom-Shaped Adhesive MicrostructuresLars Heepe, Kiel University

11:30 a.m. to NoonBioinspired Suction Attachment from the SeaPetra Ditsche, Friday Harbor Laboratories

9:00 to 9:30 a.m.Material and Damping Characteriza-tion of Discretized Adhesive Tapes in Cantilever Beams Undergoing Free and Forced VibrationsDavid Dillard, Virginia Polytechnic & State University

9:30 to 10:00 a.m.Scaling-Up Wrinkles: Creating Controlled, Micron-Sized Patterns on Meter-Sized Surfaces Using a Roll and Plate Geometry Michael Imburgia, University of Massachusetts

10:00 to 10:30 a.m.Elastocapillary Rise Between Swellable BeamsDouglas Holmes, Boston University

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Multiscale Treatment of Mechanical Contact Problems in Thin Polymeric LayersAhmed Ismail, RWTH Aachen University

11:30 a.m. to NoonMicromechanical Properties of Sintered Ag Conductor Lines on PV CellsDadhichi Paretkar, Lehigh University



8:00 – 8:45 a.m. Plenary Talk III: Modification of Polyolefin Films in the Manufacture of Adhesive Tapes

Mark Strobel & Patrick Hager, 3M Company



bioinspired Adhesion IV: Organisms Ballroom C, First FloorSession Chair: Alfred Crosby, University of Massachusetts

Soft III: MechanicsBallroom D, First FloorSession Chair: Kenneth Shull, Northwestern University

9:00 to 9:30 a.m.Residual Stress Developed During the Cure of Thermosetting PolymersJamie Kropka, Sandia National Laboratories

9:30 to 10:00 a.m.Adhesive Bonding of Composite Adherends: The Effect of Adherend Type on the Apparent Mode I Fracture Toughness Lisa Cahill, University College Dublin

10:00 to 10:30 a.m.The Mixed-Mode Fracture of Structural Adhesive JointsBamber Blackman, Imperial College London

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Mechanical Properties and Toughening Mechanisms of Epoxy Modified with Block CopolymersAmbrose Taylor, Imperial College London

11:30 a.m. to NoonTargeted Gaps in Adhesive Bonding PerformanceRobert Jensen, U.S. Army Research Laboratory

Noon to 12:30 p.m.Modelling the Toughness of AdhesivesFelicity Guild, Imperial College

9:00 to 9:30 a.m.Polymer Microstructure and Poroelasticity in Click HydrogelsEdwin Chan, National Institute of Standards and Technology

9:30 to 10:00 a.m.Molecular Weight Dependence of Interdiffusion and Adhesion of Polymers at Short Contact Times Robert Gurney, ESPCI Paristech

10:00 to 10:30 a.m.Thermo-Oxidative Stability of Reactive Adhesive SystemsFrauke Bunzel, Technische Universität Braunschweig

10:30 to 11:00 a.m.brEAK

11:00 to 11:30 a.m.Adhesion and Degradation of Surface Modified Polymer Thin Films Using QCMLogan Kearney, Purdue University

11:30 a.m. to NoonUnderstanding and Evaluation on the Linear Shrinkage of Photo-Curing Behavior through the Experimental Approach and Numerical ModelingJi-Won Park, Seoul National University

Structural Adhesives IIIBallroom E, First FloorSession Chair: Zachary Thompson, 3M Company

Measurement & Characterization IIAcademy Meeting Room, First FloorSession Chair: Chelsea Davis, National Institute of Standards and Technology


adhesion society final program

Documents

adhesion society award

adhesion society symposium

adhesion society website

schedule award sponsors

award sponsorsa special

business meeting ballroom

henkel peebles awards

poster session reception