adobe.testking.9a0-303.v2015-03-27.by.dewey › adobe › 9a0-303 › adobe.testking.9a0 … ·...

Testking.9A0-303.407.QA

Number: 9A0-303Passing Score: 800Time Limit: 120 minFile Version: 6.1

http://www.gratisexam.com/

9A0-303

Adobe Photoshop CS6 ACE Exam

Modified few queries, mounted few orthography mistakes and typos.Dump verified therefore comprehensive and enlightening that I got all necessary data simply at one

place.Really with the assistance of study dumps and observe tests I equipped myself absolutely and passed

examination.I passed the certification exams with success with the assistance of this dump.Practice tests Q&A certain to award you 100% examination success.

Exam A

QUESTION 1Which of the following options in the Refine Edge dialog box is used to determine the size of the selectionborder in which edge refinement occurs?

A. Smart RadiusB. RadiusC. View ModeD. Refine Radius tools

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 2Which of the following options in the Timeline panel hides section from the current-time indicator to the endof the layer?

A. Move Layer In Point To Current TimeB. Move Layer End Point To Current TimeC. Trim Layer Start To Current TimeD. Trim Layer End To Current Time

Correct Answer: DSection: (none)Explanation


QUESTION 3While using the Layer Style dialog box, which of the following options is used to add a shadow that falls justinside the edges of the layer's content?

A. Outer GlowB. SatinC. Inner ShadowD. Stroke

Correct Answer: CSection: (none)Explanation


QUESTION 4You are working on an image in Photoshop CS6. You have created below shown background layer on theimage and you want to apply a Smart filter on it. Which step will you choose to accomplish this task?

A. Select a Smart Object layer > choose a filter.B. Choose Filter > Convert for Smart filters.C. Select layer and choose Filter > Convert for Smart Filters.D. In the Layers panel, double-click Filter Gallery.


Explanation/Reference:Explanation:If the layer to which you want to apply a Smart Filter is not already a Smart Object layer, select it andchoose Filter > Convert for Smart Filters. To apply a Smart Filter, select a Smart Object layer, choose afilter, and specify its settings. The Smart Filter then appears in the Layers panel. Answer options B, A, andD are incorrect. These are incorrect steps.Chapter: Creative image effectsObjective: Topic D: Smart Filters

QUESTION 5What is the purpose of Frequency in the Options bar while using the Magnetic Lasso tool?


A. To specify the rate at which the lasso sets fastening pointsB. To specify a detection widthC. To specify the lasso's sensitivity to edges in the imageD. Used while working with a stylus tablet

Correct Answer: A

Section: (none)Explanation


QUESTION 6Which of the following buttons from the Layers Panel is used to create a mask that reveals the selection?

A. Add a Layer StyleB. Create a New GroupC. Create a New LayerD. Add Layer Mask



QUESTION 7Which of the following statements are true about the Targeted Adjustment tool in Camera Raw? Eachcorrect answer represents a complete solution. Choose all that apply.

A. Dragging down or left increases values.B. Dragging down or left decreases values.C. Dragging up or right increases values.D. The keyboard shortcut T toggles the last Targeted Adjustment tool you used.

Correct Answer: BCDSection: (none)Explanation

Explanation/Reference:Explanation:Tonal and color corrections can be adjusted using the Targeted Adjustment tool. Using the TargetedAdjustment tool, you can drag down on a blue sky to desaturate it, for example, or drag up on a red jacketto intensify its hue.

QUESTION 8Which of the following actions is a nondestructive edit?

A. Rotating

B. WarpingC. Applying a Blending modeD. Scaling


Explanation/Reference:Explanation:Applying a blending mode is a nondestructive effect. It does not permanently alter the pixels in the image.Answer options A, D, and B are incorrect. Transforming an image's content, such as by rotating, scaling, orwarping, is typically a destructive edit. A destructive edit is one that permanently changes pixel data.Therefore, transforming an image can degrade image quality.

QUESTION 9You work as professional photographer for WEBDESIGN Inc. You want to print color-managed image inPhotoshop CS6. Which option will you choose to accomplish the task?

A. Color-managed profilesB. Color managementC. Rendering intentD. ICC profiles


Explanation/Reference:Explanation:When printing a color-managed image, you must choose a rendering intent, which specifies the rules forhow the source colors are adjusted for out-of-gamut colors. This setting is specified in the Photoshop PrintSettings dialog box.

QUESTION 10Which of the following layer options are recorded in Layer comps?

Each correct answer represents a complete solution. Choose three.

A. Layer's appearanceB. Layer's positionC. Layer's visibilityD. Layer's name

Correct Answer: ABCSection: (none)Explanation

Explanation/Reference:Explanation:

Answer options C, B, and A are correct. Three types of layer options are recorded in Layer comps:OptionsDescriptionsLayer's visibilityWhether a layer is showing or hidden.Layer's positionShows the position of a layer in the document.Layer's appearanceWhether a layer style is applied to the layer and the layer's blending mode.

QUESTION 11Which of the following settings is used to adjust the vertical space between lines?

A. TrackingB. SpacingC. KerningD. Leading


Explanation/Reference:Explanation:Leading is used to adjust the vertical space between lines. The following table describes various settings inControl Panel:SettingsDescriptionsKerningIncreases or decreases the horizontal space between specific pairs of characters, as opposed to severalcharacters or whole blocks of text.LeadingAdjusts the vertical space between lines of type.TrackingLoosens or tightens spacing between selected characters or blocks of text, rather than between specificpairs of characters, as with kerning.

QUESTION 12Which of the following video transitions fades the first clip out as the second clip fades in?

A. Fade With WhiteB. Cross FadeC. FadeD. Fade With Black



QUESTION 13Which of the following actions is a nondestructive edit?

A. Applying a Blending modeB. ScalingC. RotatingD. Warping

Correct Answer: ASection: (none)Explanation


Applying a blending mode is a nondestructive effect. It does not permanently alter the pixels in the image.Answer options C, B, and D are incorrect. Transforming an image's content, such as by rotating, scaling, orwarping, is typically a destructive edit. A destructive edit is one that permanently changes pixel data.

Therefore, transforming an image can degrade image quality.

QUESTION 14While using the Layer Style dialog box, which of the following options is used to add a shadow that falls justinside the edges of the layer's content?

A. SatinB. Outer GlowC. StrokeD. Inner Shadow



QUESTION 15While working with the layer mask, which of the following options from the Properties panel creates a gentleedge to the mask?

A. FeatherB. DensityC. Mask EdgeD. Color Range



QUESTION 16Which of the following components can you modify by using a Levels adjustment layer?


A. ShadowsB. Blending modesC. MidtonesD. TransparencyE. Highlights

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:Explanation:Answer options E, A, and C are correct. You can use Levels adjustment layer to modify highlights,midtones, and shadows. To fine-tune an image's contrast by adjusting its brightest areas (highlights),darkest areas (shadows), and midtones, drag the input sliders on the histogram:

QUESTION 17Which of the following actions should a user take in order to dock a panel group?

A. Drag it out of the dock by its tab or title bar.B. Drag it by its tab into the dock, at the top, bottom, or in between other panels.

C. Drag it by its title bar into the dock.D. Drag it into another dock.


Explanation/Reference:Explanation:In order to dock and undock panels, do the following:

QUESTION 18Which of the following components can you modify by using a Levels adjustment layer? Each correctanswer represents a complete solution. Choose three.

A. ShadowsB. Blending modesC. MidtonesD. TransparencyE. Highlights

Correct Answer: ACESection: (none)Explanation


Answer options E, A, and C are correct. You can use Levels adjustment layer to modify highlights,midtones, and shadows. To fine-tune an image's contrast by adjusting its brightest areas (highlights),darkest areas (shadows), and midtones, drag the input sliders on the histogram:


A. Drag it out of the dock by its tab or title bar.B. Drag it by its tab into the dock, at the top, bottom, or in between other panels.C. Drag it by its title bar into the dock.D. Drag it into another dock.



In order to dock and undock panels, do the following:

QUESTION 20Which of the following controls in the White Balance drop-down menu of the Basic tab in the Camera Rawdialog box calculates the white balance based on the image data?

A. As ShotB. DaylightC. ShadeD. Auto

Correct Answer: DSection: (none)

Explanation


QUESTION 21Which of the following options from the Workflow Options dialog box in Camera Raw lets the user selectthe Bits/Channel?

A. SpaceB. SizeC. DepthD. Resolution




QUESTION 22Which of the following commands is used to spread a selection outward by the value you specify?

A. FeatherB. BorderC. SmoothD. ContractE. Expand

Correct Answer: ESection: (none)Explanation

Explanation/Reference:Explanation:The Expand command is used to spread a selection outward by the value you specify. Answer option B isincorrect. The Border command selects only the pixels at the border of a selection, based on the width youspecify. Answer option A is incorrect. The Feather command is used to blend a selection with itsbackground by applying transparency to the selection's outer pixels. Answer option D is incorrect. TheContract command is used to shrink a selection inward by the value you specify. Answer option C isincorrect. The Smooth command is used to make a selection outward by the value you specify.


A. Drag it into another dock.B. Drag it out of the dock by its tab or title bar.C. Drag it by its tab into the dock, at the top, bottom, or in between other panels.D. Drag it by its title bar into the dock.


Explanation


QUESTION 24Which of the following options in the Refine Edge dialog box automatically adjusts the radius for hard andsoft edges found in the border region?

A. RadiusB. Smart RadiusC. View ModeD. Refine Radius tools



QUESTION 25Which of the following effects takes place when we paint with gray or another color in Quick Mask mode?

A. It selects more of an image.B. It creates a semitransparent area.C. No effect.D. It deselects more of an image.



The following table describe about colors in the Quick Mask mode:OptionsPurposesPaint with whiteTo select more of an imagePaint with blackTo deselect areasPaint with gray or another colorTo create a semi-transparent area, useful for feathering or anti-aliased effects

QUESTION 26While importing image sequences, which of the following steps will improve the output? Each correctanswer represents a complete solution. Choose two.

A. The files are in different folders.B. All files have the same pixel dimensions.C. The image files are named sequentially.D. The files are not in alphabetical or numeric order.

Correct Answer: BCSection: (none)Explanation


Explanation:

Answer options C and B are correct.When you import a folder of sequenced image files, in Photoshop CS6,each image becomes a frame in a video layer.

QUESTION 27While using the Layer Style dialog box, which of the following options is used to add glows that emanatefrom the outside edges of the layer's content?

A. Inner GlowB. Inner ShadowC. StrokeD. Outer Glow



QUESTION 28Which of the following actions should a user take in order to remove a panel from a group so that it floatsfreely?

A. Drag the panel by its tab outside the group.B. Drag the title bar (the area above the tabs).C. Drag a panel's tab to a new location in the group.D. Drag the panel's tab to the highlighted drop zone in the group.


Explanation/Reference:Explanation:In order to manipulate panel groups, do the following:

QUESTION 29You work as a graphic designer for WEBDESIGN Inc. You are working on below given image in AdobePhotoshop CS6. You want to clip the Flame layer to the Text layer which is placed below it. Which of thefollowing methods will you choose to accomplish this task?

A. Fill layer MaskB. Vector MaskC. Layer Mask

D. Clipping Mask



When you create a clipping mask, you display the current layer over only the pixels in the layer below.Clipping masks work well when you want to mask a layer based on content that might change. Afterapplying the clipping mask, the image will show as follows:

Answer option C is incorrect. When you want to show only part of a layer's contents, you can create a layermask. You can change which part of the layer is visible in the image at any time, or you can reveal theentire layer again if necessary. Answer option B is incorrect. Vector Mask is a vector path componentadded to a layer to designate each pixel's visibility.

QUESTION 30Which of the following options from the Select menu is used to increase the size of an existing selection?

A. ContractB. ExpandC. DeselectD. Reselect


Explanation/Reference:Explanation:To increase or decrease the size of an existing selection, use commands in the Select menu. You can alsouse them to clean up stray pixels left inside or outside a color-based selection.

QUESTION 31While working with the Spot Healing Brush tool, which of the following Type options in the Options bar usespixels around the edge of the selection to find an area to use as a patch?

A. Aligned

B. ModeC. Proximity MatchD. Create Texture



QUESTION 32Jane works as professional photographer in a company. He is continuously downloading images on hiscomputer and wants to keep these images organized automatically according to their metadata. What's thebest way to do so?

A. Create metadata filters.B. Create smart collections.C. Create collections.D. Use the path bar.


Explanation/Reference:Explanation:You can automatically add files to a collection by using smart collections. Smart collections continuouslylook in the specified location for files containing metadata matching the criteria you tell them to look for.When a file is found, Bridge adds it to the smart collection, even if it's a new file.Answer option C isincorrect. Collections are essentially folders of files that exist only in Bridge. This is a way for you toassociate files as you would like, rather than by their location on your computer.Answer option A isincorrect. You can search for files that have common metadata and keywords by using Bridge.Answeroption D is incorrect. When navigating in Bridge, the path bar shows the location of the currently selectedfolder.

QUESTION 33In which corner of the Properties panel can you find the Targeted Adjustment tool?

A. Upper leftB. Bottom rightC. Bottom leftD. Upper right



QUESTION 34Which of the following changes can be made to a type layer but the type will NOT be editable anymore?

Each correct answer represents a complete solution. Choose two.

A. Anti-aliasingB. DistortC. PerspectiveD. Orientation


Explanation/Reference:Explanation:Answer options C and B are correct.A user can make the following changes to a type layer and still edit thetype:

QUESTION 35Which of the following display modes in the Preset Manager dialog box of Photoshop CS6 displays thename and thumbnail of each preset item?

A. Small List or Large ListB. Stroke ThumbnailC. Text OnlyD. Small Thumbnail or Large Thumbnail



QUESTION 36Which of the following options from the Batch dialog box needs to be deselected in order to save the filesprocessed by the Batch command in the location specified in the Batch dialog box?

A. Override Action "Save As" CommandsB. Include All SubfoldersC. Suppress File Open Options DialogsD. Override Action "Open" Commands



QUESTION 37Which of the following options is used to create web photo galleries in Adobe Bridge?

A. Window > Workspace > Light TableB. Window > Workspace > OutputC. Window > Workspace > FilmstripD. Window > Workspace > Metadata



QUESTION 38While working with the Photomerge option, which of the following layout options creates a consistentcomposition by designating one of the source images as the reference image?

A. AutoB. SphericalC. PerspectiveD. Collage



QUESTION 39Which of the following represents the action of the Amount slider of the Detail tab in Camera Raw?

A. Adjusts edge definition.B. Controls an edge mask.C. Adjusts how much high-frequency information is sharpened in the image and how much the sharpening

process emphasizes edges.D. Adjusts the size of the details that sharpening is applied to.


Explanation/Reference:Explanation:The sharpening controls on the Detail tab is used to adjust edge definition in the image. The AdjustmentBrush tool and Graduated Filter tool use the Radius, Detail, and Masking values when local sharpening isapplied.Use the Apply Sharpening To option in the Camera Raw preferences to specify whether sharpeningis applied to all images or just to previews.

QUESTION 40Which of the following controls of the Detail tab in Camera Raw adjusts the size of the details thatsharpening is applied to?

A. AmountB. DetailC. MaskingD. Radius


Explanation


QUESTION 41Which of the following layer data stores a layer comp for each layer?

Each correct answer represents a part of the solution. Choose three.

A. Layer positionB. Layer's appearanceC. Layer visibilityD. Layer Mask


Explanation/Reference:Explanation:Answer options C, A, and B are correct. You can use the Layer Comps panel to store comps of an image.Each layer comp is a snapshot of the Layers panel in a specified state. A layer comp stores three types oflayer data for each layer:If you have created layer groups for an image, each layer comp can contain some, all, or none of thoselayer groups. Answer option D is incorrect. Layer masks are resolution-dependent bitmap images that areedited with the painting or selection tools.

QUESTION 42Which of the following methods you will choose to perform a nondestructive adjustment with curve? Eachcorrect answer represents a complete solution. Choose two.

A. Create a duplicate layer. Then choose Image > Adjustment > Curves.B. Use the commands on the Image menu and its submenus.C. In the Layers panel, click the Create new fill or adjustment layer icon and choose Curves from the pop-

up menu.D. Use the Color Replacement tool.

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:To perform a nondestructive edit with curves, do any of the following:

QUESTION 43Jane works as professional photographer in a company. He is continuously downloading images on hiscomputer and wants to keep these images organized automatically according to their metadata. What's thebest way to do so?

A. Create smart collections.B. Create collections.C. Use the path bar.D. Create metadata filters.



Explanation:You can automatically add files to a collection by using smart collections. Smart collections continuouslylook in the specified location for files containing metadata matching the criteria you tell them to look for.When a file is found, Bridge adds it to the smart collection, even if it's a new file.Answer option B isincorrect. Collections are essentially folders of files that exist only in Bridge. This is a way for you toassociate files as you would like, rather than by their location on your computer.Answer option D isincorrect. You can search for files that have common metadata and keywords by using Bridge.Answeroption C is incorrect. When navigating in Bridge, the path bar shows the location of the currently selectedfolder.

QUESTION 44While working with the Eyedropper tool, which of the following options reads the precise value of the pixel auser clicks?

A. All LayersB. 3 by 3 AverageC. Point SampleD. Current Layer



QUESTION 45While working with the Liquify filter, which of the following distortion tools reverses the distortion a user hasalready added?

A. Pucker toolB. Reconstruct toolC. Forward Warp toolD. Twirl Clockwise tool



QUESTION 46Which of the following adjustments is meant to correct exposure problems in an image?

A. Brightness/ContrastB. LevelsC. CurvesD. Exposure



QUESTION 47Which of the following options in the Timeline panel moves the end of the layer to the current-timeindicator?

A. Move Layer In Point To Current TimeB. Trim Layer Start To Current TimeC. Trim Layer End To Current TimeD. Move Layer End Point To Current Time



QUESTION 48While working with the Photomerge option, which of the following layout options reduces the "bow- tie"distortion that can occur with the Perspective layout?

A. CylindricalB. PerspectiveC. AutoD. Collage



QUESTION 49You work as a graphic designer for WEBDESIGN Inc. You have an image of a sheep standing in front of aTree, and you want to remove the sheep. You have tried using the Clone Stamp tool and the Patch tool butdid not get success. Which of the following steps will you take to perform this task?

A. Select Content-Aware from the Use list, and click OK.B. Choose Edit, select Color Settings to open the Color Setting dialog box.C. Use tools such as the Clone Stamp, Healing Brush, and Patch tools to touch up the image.D. Choose Edit, select Fill to open the Fill dialog box.



The Content-Aware Move tool combines the functions of several different tools and steps. The Content-Aware Move tool actually has two functions: moving and extending. To move an element in an image:Answer options B, C, and D are incorrect. These are incorrect steps.

QUESTION 50Which of the following actions should a user take in order to resize panel icons so that the user can seeonly the icons?

A. Drag panel icons up and down in the dock.B. Adjust the width of the dock until the text disappears.C. Click the double arrow at the top of the dock.D. Drag the panel icon in by its tab or title bar.

Correct Answer: BSection: (none)

Explanation


QUESTION 51Which of the following settings in the Save For Web dialog box produces the smallest file size and does notsave any metadata?

A. CopyrightB. NoneC. All Except Camera InfoD. Copyright and Contact Info



QUESTION 52Which of the following file formats is used in Camera Raw for a flexible workflow of processing andarchiving camera raw data

A. PNGB. BMPC. DNGD. GIF



QUESTION 53Which of the following options in the Onion Skin dialog box sets the number of frames that will showthrough the current frame?

A. Max/Min OpacityB. Blending ModeC. Frames Before/AfterD. Frame Spacing



QUESTION 54Which of the following are the steps to copy files or folders in Adobe Bridge?

Each correct answer represents a complete solution. Choose all that apply.

A. Drag the files to a different folder in the Adobe Bridge window or in Windows Explorer (in the WindowsOS) or the Finder (in the Mac OS).

B. Right-click (in the Windows OS) or Control-click (in the Mac OS) the files, choose Move To.C. Ctrl-drag (in the Windows OS) or Option-drag (in the Mac OS) the files or folders to a different folder.D. Select the files or folders and choose Edit > Copy.

Correct Answer: CDSection: (none)Explanation


To copy files or folders, do any of the following:Answer options A and B are incorrect. To move files to another folder, do one of the following:

QUESTION 55Which of the following file formats contains both vector and bitmap graphics and is supported by virtually allgraphics, illustration, and page-layout programs?

A. BMPB. Photoshop EPS


C. Photoshop RawD. Digital Negative (DNG)



QUESTION 56Which of the following tabs in the HSL/Grayscale controls of Camera Raw changes the brightness of thecolor range?

A. Grayscale MixB. SaturationC. HueD. Luminance


Explanation/Reference:Explanation:Using the HSL / Grayscale tab adjusts individual color ranges. For example, if a red object looks too vividand distracting, you can decrease the Reds values in the nested Saturation tab.The following tabs containcontrols for adjusting a color component for a specific color range:

If you select Convert To Grayscale, you see only one nested tab:

QUESTION 57While painting with black using the Quick Mask Options dialog box, which of the following options increasesthe selected area?

A. OpacityB. Selected AreasC. Masked AreasD. Color



QUESTION 58Which of the following options in the Preset Manager dialog box displays the name of each preset item?

A. Small Thumbnail or Large ThumbnailB. Small List or Large ListC. Text OnlyD. Stroke Thumbnail



QUESTION 59While working with the Patch tool, which of the following key combinations is used to add to the existingselection?

A. Shift+dragB. Alt+Ctrl+dragC. Alt+Shift+dragD. Alt+drag



QUESTION 60You work as professional photographer for WEBDESIGN Inc. You are working on below given image inPhotoshop CS6. You want to display a semi-transparent colored overlay to differentiate between selectedand non-selected areas in this image. Which of the following modes will you choose to accomplish thistask?

A. BlendB. GrayscaleC. Quick MaskD. Advance



One way to create a selection by painting is to use Quick Mask mode. This mode displays a semi-transparent colored overlay to differentiate between selected and non-selected areas. Answer option B isincorrect. Grayscale shows you white for completely selected pixels, gray for partially selected ones, andblack for unselected ones. Answer options D and A are incorrect. Advance and Blend modes do not displaya semi-transparent colored overlay to differentiate between selected and non-selected areas.

QUESTION 61Which of the following tabs in the Camera Raw dialog box is used to sharpen images or reduce noise?

A. DetailB. Camera CalibrationC. Lens CorrectionsD. Basic



QUESTION 62Which of the following options in the Metadata panel displays description and copyright information aboutan image?

A. IPTC (IIM, Legacy)B. File PropertiesC. IPTC ExtensionD. IPTC Core



QUESTION 63Which of the following options in Adobe Bridge Workspace is used to save photos as JPEG for webuploads?

A. Path barB. Content panelC. Export panelD. Output panel



QUESTION 64Which of the following file formats is used in Camera Raw for a flexible workflow of processing andarchiving camera raw data?

A. GIFB. PNGC. BMPD. DNG



QUESTION 65What is the use of the Targeted Adjustment tool?

A. It lets you manipulate the masks.B. It lets you change the layer style.C. It lets you pick a range of colors to adjust.D. It lets you pick a range of channels to adjust.



QUESTION 66Which of the following statements is true about the Dot gain value?

A. It identifies the dot gain of the paper on which the image will be printed.B. It specifies how the neutral areas made up of cyan, magenta, and yellow are replaced with black ink.C. It limits the amount of ink used during printing.D. Its standard value is 30%.

Correct Answer: A



The Dot Gain value identifies the dot gain of the paper on which the image will be printed. Dot gainindicates how much each dot of ink will spread when it's applied to the paper. More absorbent paper, suchas newsprint, will absorb more ink, resulting in greater dot gain. You can specify the Dot Gain value so thatPhotoshop will apply less ink to compensate for the dot gain.The standard Dot Gain value is 20%. Thisvalue indicates that when you specify a 60% halftone dot, for example, it will end up measuring 80% due todot gain.Answer option C is incorrect. Too much black ink can result in a muddy image with loss of detail inthe shadows. To avoid too heavy an application of black ink, you can limit the amount of it used duringprinting; you do this by specifying a lower value in the Black Ink Limit box.Answer option B is incorrect.Select GCR to specify how the neutral areas made up of cyan, magenta, and yellow are replaced with blackink.

QUESTION 67Which of the following are the advantages of the adjustment layer?

Each correct answer represents a complete solution. Choose two

A. Random editingB. Nondestructive editsC. Destructive editsD. Selective editing

Correct Answer: BDSection: (none)Explanation


QUESTION 68Which of the following options in the Transform submenu stretches an item in all directions?

A. RotateB. SkewC. DistortD. Scale


Explanation/Reference:Explanation:The Transform submenu has the following options:

QUESTION 69Which of the following options from the Style menu in the Options bar determines marquee proportions bydragging?

A. Snap ToB. NormalC. Fixed RatioD. Fixed Size



QUESTION 70In the filter layers drop-down menu of the Layers panel, which of the following options filters the layersbased on layer styles?

A. KindB. NameC. ModeD. Effect



QUESTION 71Which of the following options in the Batch dialog box of Photoshop CS6 is used to process files in thefolder a user specifies?

A. FolderB. ImportC. BridgeD. Opened Files



QUESTION 72Which of the following options in the Refine Edge dialog box is used to precisely adjust the border area inwhich edge refinement occurs?

A. Refine Radius and Erase Refinements toolsB. View ModeC. Smart RadiusD. Radius



QUESTION 73Which of the following blending modes darkens the base color to reflect the blend color?

A. Linear BurnB. Color BurnC. DarkenD. Multiply



QUESTION 74Which of the following keyboard shortcuts is used to remove a layer from a clipping mask between twolayers?

A. TabB. AltC. CtrlD. Shift


Explanation


QUESTION 75Which of the following source sampling types will you choose to fix an imperfection in an image?


A. Content-AwareB. Proximity MatchC. Clone stamp toolD. Create Texture

Correct Answer: ABDSection: (none)Explanation


Answer options B, A, and D are correct. Depending on the image and the kinds of imperfections you needto fix, you can specify different source sampling types for the Spot Healing Brush tool. With the toolselected on the options bar, select one of the following:Answer option C is incorrect. The Clone Stamp tool is used to sample parts of an image and paint it in otherparts of the image.

QUESTION 76Which of the following options helps you monitor and modify your work?

A. Application barB. PanelsC. Control panelD. Document window



QUESTION 77Which of the following Process Versions of Camera Raw is used in Camera Raw 7?

A. Process Version 2003B. Process Version 2012C. Process Version 2010D. Process Version 2008



Process Version 2012 Images edited for the first time in Camera Raw 7 use process version 2012. PV2012offers new tone controls and new tone-mapping algorithms for high-contrast images. Answer option C isincorrect. Process Version 2010 images edited in Camera Raw 6 use PV2010 by default. PV2010 offers

improved sharpening and noise-reduction from the previous process version, PV2003. Answer option D isincorrect. This Process Version of Camera Raw is not used in Camera Raw 7. Answer option A is incorrect.Process Version 2003 is the original processing engine, used by Camera Raw versions 5.x and earlier.

QUESTION 78Which of the following is the function of the Hue tab in the HSL/Grayscale controls of Camera Raw?

Use controls in this tab to specify the contribution of each color range to the grayscale version of the image.

A. Use controls in this tab to specify the contribution of each color range to the grayscale version of theimage.

B. Changes the color.C. Changes the vividness or purity of the color.D. Changes the brightness of the color range.



Using the HSL / Grayscale tab adjusts individual color ranges. For example, if a red object looks too vividand distracting, you can decrease the Reds values in the nested Saturation tab.The following tabs containcontrols for adjusting a color component for a specific color range:

If you select Convert To Grayscale, you see only one nested tab:

QUESTION 79Which of the following is NOT an option of Color LUT Adjustment?

A. Color tintB. AbstractC. Device LinkD. 3DLUT File



The Color LUT (Lookup Table) Adjustment in Photoshop CS6 has several options:

QUESTION 80Which of the following is used to clear filters from the Filter panel in Adobe Bridge?

A. Click the Clear Filter button at the bottom of the Filter panel.B. Click the Keep Filter When Browsing button at the bottom of the Filter panel.C. Alt-click (in the Windows OS) or Option-click (in the Mac OS) to inverse selected criteria.D. Select categories from the Filter panel menu.



QUESTION 81While working with the Liquify filter, which of the following distortion tools moves pixels away from thecenter of the brush area as you hold down the mouse button or drag?

A. Forward Warp toolB. Bloat toolC. Pucker toolD. Reconstruct tool



QUESTION 82Which of the following represents the function of the Appearance section in the Output tab of AdobeBridge?

A. It chooses colors for different elements of the gallery.B. It specifies the information that appears on every page of the gallery.C. It includes a caption, based on image metadata, on gallery images.D. It specifies the size of images and thumbnails, the quality of the JPEG images, transition effects,

layouts, and whether to include filenames on HTML gallery images.



QUESTION 83Which of the following panels is available in Adobe Photoshop, Adobe InDesign, and Adobe InCopy tobrowse and manage assets?

A. Camera rawB. Mini BridgeC. File browsingD. Color management



QUESTION 84In the Timeline panel, which of the following options is used to vary the parameter settings of layer effectsevenly between the beginning and ending frames?

A. All LayersB. EffectsC. Opacity

D. Position



QUESTION 85Which of the following options in the Print dialog box allows you to select a printer from the list of installedsystem printers?

A. PrinterB. Print SettingsC. Scaled Print SizeD. Layout



QUESTION 86In the Timeline panel, which of the following options is used to vary the parameter settings of layer effectsevenly between the beginning and ending frames?

A. EffectsB. All LayersC. PositionD. Opacity



QUESTION 87Which of the following steps are correct for deleting layers from the image in Photoshop CS6?


A. In the Layers panel, click the Delete icon.B. From the Layers panel menu, choose the Delete Layer option.C. Press the Delete key.D. Press the Backspace key.



Answer options A, B, and C are correct.To delete one or more layers, select the desired layers and do oneof the following:

You might end up with one or more empty layers that you are not using. To quickly delete all empty layers inan image, choose File > Scripts > Delete All Empty Layers.Answer option D is incorrect. The Backspacekey is not used for deleting layers from the image.

QUESTION 88Which of the following options in the Onion Skin dialog box determines whether the frames are beingshown in consecutive order or appear with gaps in between?

A. Max/Min OpacityB. Blend ModeC. Frame SpacingD. Onion Skin Count



QUESTION 89Which of the following file formats is flexible for transferring images between applications and computerplatforms?

A. Digital Negative (DNG)B. Photoshop EPSC. Photoshop RawD. BMP



QUESTION 90Which of the following descriptions best describes the usage of fonts section in the Metadata panel?

A. Lists the fonts used in Adobe InDesign files.B. Displays settings applied by the Camera Raw plug-in.C. Lists CMYK plates specified for printing in Adobe Illustrator files.D. Lists files that are linked to an Adobe InDesign document.



QUESTION 91Which of the following options from the Quick Mask Options dialog box when selected, sets masked areasto black (opaque) and selected areas to white (transparent)?

A. OpacityB. Masked AreasC. Selected AreasD. Color



QUESTION 92Which of the following options in the Layer menu are used to convert a selection into a new layer?


A. Layer Via CopyB. GroupC. LayerD. Layer Via Cut

Correct Answer: ADSection: (none)Explanation


In order to convert a selection into a new layer, follow these steps:

QUESTION 93Which of the following steps are necessary to create duotone in the image given below in Photoshop CS6?

Each correct answer represents a part of the solution. Choose all that apply

A. Open a grayscale image, or convert a color image to grayscale.B. Choose Image > Mode > Duotone to open the Duotone Options dialog box. You can specify a

monotone, duotone, tritone, or quadtone.C. From the Type list, select the swatches you want to use.D. Next to each ink, click the color swatch to open the Color Libraries dialog box. Specify the color you

want to use for the ink, and click OK.E. From the Type list, select the duotone variation you want to use.

Correct Answer: ABDESection: (none)Explanation


Answer options A, B, D, and E are correct.A grayscale image reproduced with a single color of ink is amonotone. Grayscale images reproduced with three or four inks are tritones or quadtones, respectively.However, all of these variations are often generically referred to as duotones. To create any of theseduotone variations in Photoshop, take the following steps:

QUESTION 94

Which of the following actions represents the function of the Basic tab in the Camera Raw dialog box?

A. Adjust white balance, color saturation, and tonalityB. Simulate film grain or apply a postcrop vignetteC. Sharpen images or reduce noiseD. Fine-tune tonality using a Parametric curve and a Point curve



The Camera Raw image adjustment tabs are as follows:TabsDescriptionBasicIt adjusts white balance, color saturation, and tonality.Tone CurveIt is used for adjusting tonality using a Parametric curve and a Point curve.DetailIt sharpens images or reduces noise.HSL / GrayscaleIt is used for tuning colors using Hue, Saturation, and Luminance adjustments.Split ToningIt is used to color monochrome images or create special effects with color images.Lens CorrectionsIt is used to compensate for chromatic aberration, geometric distortions, and vignetting caused by thecamera lens.EffectsIt simulates film grain or applies a postcrop vignette.Camera CalibrationIt applies camera profiles to raw images to correct color casts and adjust non-neutral colors to compensatefor the behavior of a camera's image sensor.PresetsIt is used for applying sets of image adjustments as presets.SnapshotsIt creates versions of a photo that records its state at any point during the editing process.

QUESTION 95Which of the following options in the Layer menu are used to add a layer mask that hides part of a layer?


A. Hide AllB. Reveal AllC. Reveal SelectionD. Hide Selection



Answer options C and D are correct. In order to add a layer mask that hides part of a layer, do the following:

QUESTION 96

Which key combinations are used to fill a selection on any layer with the background color?


A. Ctrl+BackspaceB. Ctrl+Shift+BackspaceC. Ctrl+Shift+DeleteD. Ctrl+Delete

Correct Answer: ADSection: (none)Explanation


Answer options D and A are correct.If you want to use the current foreground or background color to fill alayer or a selection, you can use several techniques:Answer options C and B are incorrect. These key combinations are not used to fill a selection on any layerwith the background color.

QUESTION 97Which of the following tools is used for drawing straight-edged segments of a selection border?

A. Lasso toolB. Polygonal Lasso toolC. Rectangular Marquee toolD. Magnetic Lasso tool



QUESTION 98Which of the following options are used to add black to neutral areas currently defined using cyan,magenta, and yellow?

Each correct answer represents a complete solution. Choose all that apply.

A. Ink limitsB. Undercolor AdditionC. Undercolor RemovalD. Gray Component Replacement



In the Custom CMYK dialog box, you can customize several settings under Separation Options. Next toSeparation Type, you can select GCR or UCR, which are the two types of separations. GCR and UCR aredifferent techniques for adding black to neutral areas currently defined using cyan, magenta, andyellow.GCR stands for Gray Component Replacement. Select GCR to specify how the neutral areas madeup of cyan, magenta, and yellow are replaced with black ink.UCR stands for Undercolor Removal. Whenyou select UCR, you don't have as much control over conversion of neutral areas from cyan, magenta, andyellow percentages to black. UCR specifies that only the darkest areas should be converted to

black.Answer option B is incorrect. When you specify GCR separation, you can specify an undercoloraddition value in the UCA Amount box. The UCA Amount value you specify leaves a small C, M, Ypercentage, along with added black, in the shadow areas when you're using GCR to create more saturatedblacks.Answer option A is incorrect. To avoid too heavy an application of black ink, you can limit the amountof it used during printing; you can do this by specifying a lower value in the Black Ink Limit box.In addition tolimiting the amount of black ink, you might need to limit the combined amount of all four inks for an image'sdarkest areas to avoid over-saturating the paper with too much ink. You can specify a value to limit thecombined cyan, magenta, yellow, and black inks in the Total Ink Limit box.

QUESTION 99Which of the following options in the Save For Web dialog box specifies the interpolation method?

A. Constrain ProportionsB. CopyrightC. All Except Camera InfoD. Quality



QUESTION 100Which of the following options in the New Fill Layer submenu fills the adjustment layer with the currentforeground color?

A. ImageB. PatternC. GradientD. Solid Color



Solid Color fills the adjustment layer using the current foreground color. To select a different color, use theColor Picker.

Answer options C, B, and A are incorrect. These options do not help to fill the adjustment layer with thecurrent foreground color.

QUESTION 101Which of the following key combinations is used to restore all preferences to default settings of PhotoshopCS6?

A. Alt+F7+ShiftB. Tab+Control+ShiftC. Alt+Control+ShiftD. Alt+Control+Enter



QUESTION 102What key or key combination can you use to temporarily access the Zoom tool?

A. SpacebarB. Alt+SpacebarC. Ctrl+SpacebarD. Ctrl+Alt+Spacebar



QUESTION 103Which of the following file formats is commonly used to display photographs and other continuous- toneimages in HTML documents?

A. JPEGB. GIFC. IFFD. PDF



QUESTION 104Which of the following file formats preserves all the features while working with images in Photoshop CS6?

A. PSDB. JPEGC. TIFFD. PNG



QUESTION 105You've created a tool preset, but it isn't appearing in the Export/Import Presets dialog box. What do youneed to do?

A. Delete a tool preset.B. Create a preset set.C. Select the Tool Presets panel.D. Select Preset picker.


Explanation


QUESTION 106You've adjusted the options for a number of tools but now want to return them all to their defaults.How do you do so?

A. In the Tool Preset picker, right-click any presets and choose Delete Tool Preset.B. On the options bar, right-click the Tool Preset picker and choose Reset All Tools.C. On the options bar, right-click the Tool Preset picker and choose Reset Tool.D. In the Tool Preset panel, right-click any presets and choose Delete Tool Preset.



QUESTION 107When you zoom to 100% magnification, you see:

A. One image pixel for each monitor pixelB. The image at the size that fills the monitorC. The image at the size it will be when printedD. The image at the size that fills its window



QUESTION 108Which of the following options is used to hide or show all panels except the Tools panel and Options bar?

A. Shift+TabB. Shift+AltC. Shift+CtrlD. Shift+Caps Lock



QUESTION 109Which of the following Photoshop components displays data about an open image?

A. Workspace switcherB. Panel dockC. Tools panelD. Document statistics box



QUESTION 110Which of the following image file formats is commonly used for Web applications?

A. PNGB. TIFFC. BMPD. DIB



QUESTION 111Which of the following menus contains Preset Manager?

A. EditB. WindowC. ImageD. File



QUESTION 112You've opened several panels and have arranged them in a way that works best for your workflow.How can you save this arrangement?

Each correct answer represents a part of the solution. Choose two.

A. Name the workspace and click Save.B. Choose Window, Workspace, New Workspace.C. Name the Horizontal Type tool and click Save.D. In the Workspace, click the Horizontal Type tool.

Correct Answer: ABSection: (none)Explanation


QUESTION 113In order to export presets you've created, you will choose:

A. Choose Edit > Presets > Export/Import PresetsB. Choose Edit > Presets > Migrate manager

C. Choose Edit > Presets > Migrate PresetsD. Choose File > Presets > Import/Export Presets



QUESTION 114Which of the following Photoshop workspace components displays options for the currently selected tool?

A. Tools panelB. Application barC. PanelsD. Options bar



QUESTION 115Which of the following softens a selection by gradually reducing opacity to a specified number of pixelsextending equally inside and outside a selection edge?

A. SmoothingB. ContrastingC. ContractingD. Feathering



QUESTION 116To increase or decrease the size of an existing selection, you will choose:

A. Select > Transform SelectionB. Select > GrowC. Select > Modify > Expand or ContractD. Select > Refine Edge



QUESTION 117How can you most efficiently create a perfectly square selection?

A. Press Alt and use the Polygonal Lasso tool to click to add each of the square's corners.

B. Press Shift and use the Polygonal Lasso tool to click to add each of the square's corners.C. Press Alt and use the Rectangular Marquee tool to drag to create the square.D. Press Shift and use the Rectangular Marquee tool to drag to create the square.



QUESTION 118True or false? If you want to move the selected pixels, rather than the selection marquee, you should dragwith the Move tool, not a selection tool.

A. FalseB. True



QUESTION 119How can you select a tool that isn't currently visible in the Tools panel?

A. All of these answers are correct.B. Click and hold on the tool group to display a menu, then select the desired tool.C. Press Shift and the tool's keyboard shortcut (for example, Shift+M).D. Press Alt and click the tool group to cycle through the tools.



QUESTION 120Which key or key combination will you use to fill a selection on any layer with the background color?

A. Ctrl+DeleteB. Alt+DeleteC. Alt+BackspaceD. Backspace



QUESTION 121To subtract from a selection, which key should you press as you use a selection tool?

A. CtrlB. Alt

C. ShiftD. F1



QUESTION 122Which of the following options in the Selection Preview drop-down menu, in the Color Range dialog box,shows unselected areas as a rubylith overlay?

A. Quick MaskB. White MatteC. NoneD. Grayscale



QUESTION 123Which of the following selection tools snaps to the edges of defined areas in an image?

A. Single Row Marquee toolB. Elliptical Marquee toolC. Magnetic Lasso toolD. Lasso tool



QUESTION 124Which of the following options from the Options bar is used to specify the sensitivity of lasso to edges in theimage?

A. Stylus PressureB. FrequencyC. WidthD. Contrast



QUESTION 125What is the keyboard shortcut for the Free Transform command?

A. Alt+FB. Alt+TC. Ctrl+FD. Ctrl+T



QUESTION 126Which of the following commands is used to stretch the selected layer in any direction?

A. SkewB. DistortC. ScaleD. Warp



QUESTION 127How can you add a layer that contains a copy of the current selection's pixels?

A. Press Ctrl and click the "Create a new layer" icon in the Layers panel.B. Choose Layer, New, Layer via Copy.C. Click the "Create a new layer" icon in the Layers panel.D. Press Alt and click the "Create a new layer" icon in the Layers panel.



QUESTION 128While using the Layer Style dialog box, which of the following options is used to specify the size of a glowthat emanates from the inside edges of the layer's content?

A. Inner GlowB. Bevel and EmbossC. Outer GlowD. Satin



QUESTION 129

How can you arrange a layer so that its contents overlap the contents of all other layers? [Choose all thatapply.]

A. Choose Layer, Arrange, Send to Back.B. Drag the layer to the top of the Layers panel.C. Drag the layer to the bottom of the Layers panel.D. Choose Layer, Arrange, Bring to Front.



QUESTION 130What will you do to make a layer's pixels appear semi-transparent?

A. Change the transparency level.B. Increase the density.C. Change the order.D. Lower its opacity.



QUESTION 131Which of the following options in the Image Rotation submenu rotates the image by a half-turn?

A. Rotate 90 CWB. Rotate 180C. Flip HorizontalD. Rotate 90 CCW



QUESTION 132How can you select multiple layers in the Layers panel?

A. Right-click each layer you want to select in the Layers panel.B. Press Alt and click each layer you want to select in the Layers panel.C. Click the top layer you want to select, and from the Layers panel menu, choose Merge Down.D. Press Ctrl and click each layer you want to select in the Layers panel.



QUESTION 133While transforming, which of the following key combinations is used to change the center of rotation?

A. Ctrl-dragB. Space-dragC. Shift-dragD. Alt-drag



QUESTION 134To make multiple lines of text wrap automatically within a rectangular border, you need to create:


A. Point textB. Wrap textC. You can't wrap multiple lines of text automatically in Photoshop.D. Paragraph text



QUESTION 135True or false? Double-clicking a type layer's "T" thumbnail switches to the Horizontal Type tool and selectsall of the text on that layer.

A. FalseB. True



QUESTION 136Which of the following ways are correct to change the selected layer's opacity?


A. Edit the value in the Opacity box.B. Click the triangle to the right of the Opacity box, and drag the Opacity slider that appears.

C. With the Move tool selected, type a single number to specify opacity in increments of 10%.D. Click on the Layer tab and select opacity.


Explanation/Reference:Explanation:Answer options B, A, and C are correct.There are several ways to change the selected layer's opacity:Answer option D is incorrect. There is no opacity option in the Layer tab.

QUESTION 137Which of the following methods are used for transforming the item?


A. To scale the item, press Ctrl+Alt+Shift and drag a transform handle.B. To move the item, drag from within the transform border.C. To skew the item, press Ctrl and drag a transform handle.D. To rotate the item, drag from outside the transform border. Press Shift as you rotate.


Explanation/Reference:Explanation:Transform the item by doing any of the following:Answer option A is incorrect. To scale the item, drag the transform handles and to scale the itemproportionally, press Shift as you drag a corner handle.

QUESTION 138In which of the following directions should the Targeted Adjustment tool be dragged to decrease thesaturation of an image?

A. RightB. UpC. DownD. Left



QUESTION 139What does dragging the gamma slider to the left in the Levels dialog box do to the image?

A. Brightens the highlightsB. Darkens the midtonesC. Brightens the midtonesD. Darkens the shadows



QUESTION 140What tool can you use to modify a Curves adjustment layer by pointing to the area in the image you want tomodify and drag?

A. The Eyedropper tool.B. The Targeted Adjustment tool.C. The Content-Aware Move tool.D. The Free Transform tool.



QUESTION 141Why would you use a clipping mask with an adjustment layer?

A. To apply the adjustment layer to all layers below itB. To apply the adjustment layer to all layers above itC. To apply the adjustment layer to all layers in the imageD. To apply the adjustment layer to only the layer directly below it



QUESTION 142Which of the following options is used from the Options bar to gently contract the matte while using theSmudge tool in masking mode?

A. NormalB. ColorC. DarkenD. Lighten



QUESTION 143How can you perform an adjustment as a nondestructive edit? [Choose all that apply.]

A. Use the commands on the Image menu and its submenus.B. Use the Color Replacement tool.C. Create a duplicate Background layer and perform destructive edits on that layer, preserving the original

layer.D. Use the Adjustments panel to perform a color correction on an adjustment layer, which can be reset or

deleted if necessary.



QUESTION 144Which of the following options in the Layer menu is used to remove a layer from a clipping mask?

A. Layer > New Adjustment LayerB. Layer > Release Clipping MaskC. Layer > Layer MaskD. Layer > Vector Mask



QUESTION 145Which tool creates a duplicate of a sampled area when you paint in another area?

A. The Patch toolB. The Spot Healing Brush toolC. The Healing Brush toolD. The Clone Stamp tool



QUESTION 146Which of the following dialog boxes can you use to experiment with applying multiple filters at once?

A. The Levels dialog boxB. The Filter Gallery dialog boxC. The Maximum Filter dialog boxD. The Layer Style dialog box



QUESTION 147True or false? For maximum flexibility when painting, you should create a new blank layer before using theBrush tool.

A. FalseB. True



QUESTION 148How can you choose a different brush diameter and hardness when you're using the Brush tool to paint?

A. On the options bar, select an option from the Mode list.B. On the options bar, open the Brush Preset picker and select a brush type.C. In the Tools panel, double-click the Brush tool; then select a brush type and click OK.D. In the Tools panel, select a different brush.



QUESTION 149Which of the following is used to set the foreground or background color?

A. Gradient ToolB. Eyedropper ToolC. Pen ToolD. Brush Tool



QUESTION 150Which of the following tools paints hard-edged strokes?

A. Brush toolB. Pencil toolC. Mixer Brush toolD. Color Replacement tool



QUESTION 151While working with the Red Eye tool, which of the following options in the Options bar is used to increase ordecrease the area affected by the tool?

A. Proximity MatchB. Content-AwareC. Pupil Size

D. Darken Amount



QUESTION 152Which tool is most effective at isolating a complex foreground object that appears over a multicoloredbackground?

A. The Background Eraser toolB. The Magic Wand toolC. The Eraser toolD. The Magnetic Lasso tool



QUESTION 153While working with the Eyedropper tool, which of the following options is used to sample color from thecurrently active layer?

A. 5 by 5 AverageB. All LayersC. Current LayerD. Point Sample



QUESTION 154Which of the following tools is used for selecting a color without having to open a separate panel?

A. Eyedropper ToolB. Regular Color PickerC. Build up ToolD. HUD Color Picker



QUESTION 155The method to automatically fill a selection with nearby content is:

A. Content Aware

B. Create TextureC. Proximity MatchD. Auto Fill



QUESTION 156The Clone Source panel would be useful for which of the following situations?

A. You want to clone an area from one image to paint into another.B. You want to clone several different areas in an image and save the clone sources.C. You want to clone an area in an image but paint it in at a different angle.D. All of these answers are correct.



QUESTION 157Which of the following tools erases areas to transparency by dragging?

A. Content-Aware Move toolB. Magic Eraser toolC. Background Eraser toolD. Eraser tool



QUESTION 158Which of the following tools changes the color saturation of the area on which it is applied?

A. Sponge toolB. Magic Eraser toolC. Burn toolD. Dodge tool



QUESTION 159True or false? You can only reduce, not increase, the canvas size of an image by using the Canvas Sizedialog box.

A. TrueB. False



QUESTION 160In the Image Size dialog box, you increase an image's resolution from 72 to 120 with Resample Imagecleared. How does this change affect your image?

A. The image's file size increases.B. The image will appear larger if displayed in a Web browser.C. The image will appear smaller when printed.D. The image will appear larger when printed.



QUESTION 161While keeping the resolution constant, increasing or decreasing the width or height and trying to retain theoriginal appearance of the image, this process is called:

A. ResamplingB. AdjustingC. BlurringD. Resizing



QUESTION 162To add more pixels around an image, you can increase the:

A. Document sizeB. Canvas sizeC. Add pixelsD. Image size



QUESTION 163If you want to rotate an image while reducing its canvas size, you should use the __________ tool.

A. ResizeB. CanvasC. CropD. Rotate



QUESTION 164True or false? It's important to set images intended for the Web to ppi.

A. FalseB. True



QUESTION 165To see how large an image will appear when viewed in a Web browser, you will choose:

A. Document Statistics BoxB. Document SizeC. Actual PixelsD. Print Size



QUESTION 166A good target resolution for color images you intend to print is:

A. 300 ppiB. The printer's resolutionC. 1200 ppiD. 96 ppi



QUESTION 167When pixels are large enough that viewers can see stair-stepped, jagged edges, the image is __________.

A. Halftoning

B. PixelatedC. CanvasD. Resample



QUESTION 168If you want to increase or decrease the canvas size, you should use:

A. Rotate toolB. Canvas toolC. Resize toolD. Crop tool



QUESTION 169Which of the following options in the Label menu in Adobe Bridge is used to remove all stars?

A. Label > RejectB. Label > No RatingC. Label > Increase RatingD. Label > Decrease Rating



QUESTION 170Which of the following key combinations is used to add a Reject rating in Adobe Bridge?

A. Shift+CtrlB. Alt+DelC. Shift+DelD. Ctrl+Del



QUESTION 171Which of the following options in the Output tab is used to print the filename under each image and pagenumbers in the header or footer in Adobe Bridge?

A. DocumentB. LayoutC. OverlaysD. Watermark



QUESTION 172You've selected several images in Bridge, and the Keywords panel displays the following. What does thismean?

A. None of the images' metadata contain these keywords.B. Some of the images' metadata contain these keywords.C. These keywords shouldn't be used for the selected images.D. All of the images' metadata contain these keywords.



QUESTION 173Which of the following options in the File Info dialog box lists read-only information about the camera andsettings used to take a photo?

A. CategoriesB. OriginC. AdvancedD. Camera Data



QUESTION 174Which of the following options in the Image Options tab of the Export dialog box of Adobe Bridge createsthe JPEG from the full-size image?

A. Resample MethodB. Image QualityC. Apply Metadata TemplateD. Always Render From Fullsize Image


Explanation


QUESTION 175In Adobe Bridge to transfer photos from your camera or memory card, you will use:

A. Export ImagesB. Photo DownloaderC. Get PhotosD. Save Photos



QUESTION 176Which of the following options in Adobe Bridge is used to place files into another application?

A. Export toB. PlaceC. Copy toD. Move to



QUESTION 177Which of the following options in the File Info dialog box displays XMP text information about the file?

A. Video DataB. Raw DataC. DICOMD. Mobile SWF



QUESTION 178Which of the following tabs in the File Info dialog box includes additional identifying information about photocontent, including rights-related details?

A. HistoryB. IPTC ExtensionC. GPSD. Audio Data



QUESTION 179True or false: You can add some metadata to images when importing them from a camera into Bridge.

A. FalseB. True



QUESTION 180Which of the following Adobe Bridge's workspaces displays the Content panel in Details view, along withthe Favorites, Keywords, Filter, and Export panels?

A. OutputB. KeywordsC. EssentialsD. Metadata



QUESTION 181Which of the following options in the Batch Rename dialog box contains a checkbox to preserve the currentfilename in XMP Metadata?

A. Destination FolderB. String SubstitutionC. PreviewD. Options



QUESTION 182Which of the following applications will you use to manage files?

A. Adobe BridgeB. Adobe IllustratorC. Adobe InDesignD. Adobe Creative Suite



QUESTION 183Describe how you can use Bridge to copy files from one folder to another in a separate location on yourcomputer.


A. Navigate to the files using the Folders tab or the path bar, and select them.B. Use Bridge to navigate to where you want to copy the files and press Ctrl+V.C. Choose File, File Info.D. Press Ctrl+C to copy.



QUESTION 184You want to browse images according to different metadata criteria, but you're unsure which metadata youwant to use. How can you do this?


A. Contract the metadata to hide irrelevant images.B. Expand the available categories.C. In the Filter panel, select the metadata you want to enable.D. Select the desired metadata to view relevant images.



QUESTION 185True or false: Creating a collection in Bridge changes the locations of files on your computer.

A. TrueB. False



QUESTION 186True or false: When creating a Web gallery, you could have Bridge upload the gallery to an FTP site if youhave the login information.

A. False

B. True



QUESTION 187Consider the given image:

Which mode will you use to view this image using Adobe Bridge?

A. View ModeB. Review ModeC. On-click preview ModeD. Preview Mode



You can view multiple files at once by using Review Mode. To do so, select the files you want to review and,on the application bar, click the Refine button and choose Review Mode. You can also choose View >Review Mode or press Ctrl+B.Answer option D is incorrect. When you select a file, Bridge automaticallydisplays a preview of it in the Preview panel (if the Preview panel is open). You can drag the edges of thePreview panel to make it as large or small as you'd like. In addition, when you click in the Preview panel, thecursor becomes a loupe that you can use to magnify areas of the preview.Answer option A is incorrect.There is no view mode in Adobe Bridge.Answer option C is incorrect. With a file selected, press Spacebarto display the file in full-screen mode. When in fullscreen mode, click the file to enlarge it to 100%, and clickagain to zoom back to fullscreen view. Use the Left Arrow and Right Arrow keys to navigate to the next orprevious photo. Click Spacebar again to return to Bridge.

QUESTION 188Which of the following options in the Export tab is used to enable or disable export modules in AdobeBridge?

A. Manage ModulesB. Save To Hard DriveC. Photoshop.comD. Export Progress


Explanation/Reference:Explanation:Export modules in Adobe Bridge are used for exporting photos. Each module holds photos in a queue untilyou export them. Each module allows you to specify the image size and other options.

QUESTION 189While working with the Layer Comps panel, which of the following actions is executed on the caution icon tosee the pop-up menu for the Clear layer comp warning?


A. Ctrl-ClickB. Right-ClickC. Alt-ClickD. Left-Click



QUESTION 190Multiple versions of a design or layout are typically called:

A. CompositionsB. Layer compsC. DeliverablesD. Multi-version



QUESTION 191To organize layers so they appear in a collapsible layer with a folder icon, you should:

A. Link them.B. Combine them into a Smart Object.C. Create a clipping mask.D. Group them.



QUESTION 192You want to filter layers to find those that use the Lighten blending mode. Then you want to preserve thefilter settings to use later as you work in the image. Which of the following steps will you perform toaccomplish the task?


A. In the Layers panel, from the filter list, select Mode.B. Choose Layer, Flatten Image.C. Click the toggle button at the top-right of the Layers panel.D. Select Lighten from the options list.

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:Answer options A, C, and D are correct. First, in the Layers panel, from the filter list, select Mode. Then,from the options list, select Lighten. To turn off filtering while preserving the settings you've specified, clickthe toggle button at the top-right of the Layers panel.

QUESTION 193From which submenu can you export layer comps?

A. File, Place

B. File, ExportC. File, ScriptsD. File, Automate



QUESTION 194Which of the following options from the Options bar is used to make vector shapes on a separate layer?

A. PathB. ShapeC. StrokeD. Pixels



QUESTION 195Which of the following blending modes burns or dodges the colors by increasing or decreasing the contrast,depending on the blend color?

A. Hard LightB. Soft LightC. OverlayD. Vivid Light



QUESTION 196How can you convert several selected layers into a Smart Object?

A. From the Layers panel menu, choose Merge Layers.B. From the Layers panel menu, choose New Group.C. From the Layers panel menu, choose Convert to Smart Object.D. From the Layers panel menu, choose New Group from Layers.



QUESTION 197Which of the following key combinations will you use to create a new layer via copy?

A. Ctrl+Alt+JB. Ctrl+Alt+Shift+JC. Ctrl+Shift+JD. Ctrl+J



QUESTION 198Which of the following blending modes subtracts either the blend color from the base color or the basecolor from the blend color, depending on which has the greater brightness value?

A. DifferenceB. SubtractC. ExclusionD. Divide



QUESTION 199Which of the following options from the Rasterize submenu is used to rasterize all vector data on theselected layers?

A. Smart ObjectB. VideoC. 3DD. Layer



QUESTION 200Which of the following statements are true about Smart Objects? [Choose all that apply.]

A. A Smart Object's data cannot be edited after you've converted it from layer data.B. Only raster, not vector, data can be stored as a Smart Object.C. You can combine multiple layers into one Smart Object.D. A Smart Object can be transformed to a small size and then back to its original size with no loss of

quality.



QUESTION 201Which types of layer data can vary among layer comps for a single layer? [Choose all that apply.]

A. Pixel contentB. The position of layer content in the imageC. The layer blending modeD. Layer visibility



QUESTION 202Which of the following blending modes creates a result color with the luminance and saturation of the basecolor and the hue of the blend color?

A. SaturationB. ColorC. LuminosityD. Hue



QUESTION 203True or false? Applying a blend mode is a destructive edit.

A. FalseB. True



QUESTION 204How can you specify that the contents of several layers always move as a unit, without flattening the layers?[Choose all that apply.]

A. Select each of the layers, and from the Layers panel menu, choose Merge Layers.B. Select each of the layers, and click the Link layers button in the Layers panel.C. Select each of the layers, and from the Layers panel menu, choose Link Layers.D. Select each of the layers, and choose Layers, Smart Objects, Group into New Smart Object.



QUESTION 205Which of the following Lock options will you choose to edit only the opaque areas of a layer?

A. Lock allB. Lock transparent pixelsC. Lock image pixelsD. Lock position



QUESTION 206Which of the following blending modes brightens the base color to reflect the blend color by increasing thebrightness?

A. Color DodgeB. Linear Dodge (Add)C. ScreenD. Lighter Color


Explanation/Reference:Explanation:The following are the Lightening blending modes:

QUESTION 207Which of the following is used for displaying color components of areas within a selection range except

black area?

A. Black MatteB. Quick MaskC. GrayscaleD. White Matte



QUESTION 208True or false? In the Swatches panel, a swatch can consist of a color, pattern, or gradient.

A. FalseB. True



QUESTION 209In which dialog box do overlays appear?

A. Filter GalleryB. LevelsC. Layer StyleD. Maximum Filter



QUESTION 210Which of the following are used for determining the range of colors that are selected beyond the sampledcolor?

A. Color rangeB. Sampled colorsC. Fuziness valueD. Tonal range



QUESTION 211Which of the following gradient types displays one color at the center and blends outward to the other

colors?

A. RadialB. ReflectedC. DiamondD. Linear



QUESTION 212To fill an image with a color that automatically expands if you enlarge the canvas size, what should youcreate?

A. Adjustment layerB. Fill layerC. Peppers layerD. Overlay layer



QUESTION 213Which of the following adjustments allows you to change the hue, saturation, or lightness of the differentcolor channels or all of them at once?

A. Color BalanceB. VibranceC. Hue/SaturationD. Brightness/Contrast



QUESTION 214If you are using the same colors repeatedly, you should save them as:

A. StylesB. ColorC. SwatchesD. History



QUESTION 215Using the Color Replacement tool, you want to replace a range of colors as you paint in the image.Which option should you select?

A. Color Sampling: Background SwatchB. Anti-aliasC. Color Sampling: ContinuousD. Color Sampling: Once



QUESTION 216Which tool allows you to paint over multiple colors in an image, changing only the pixels that match asample color?

A. The Color Sampler tool.B. The Color Replacement tool.C. The Magic Eraser tool.D. The Brush tool.



QUESTION 217Which of the following can you do with the Hue/Saturation dialog box? [Choose all that apply.]

A. Change the brightness of the image's shadows, midtones, and highlights independently.B. Colorize an image.C. Make the image's colors more vibrant.D. Make an image's orange colors redder.



QUESTION 218Which tool should you choose for changing only the pixels that match a sample color?

A. GradientB. Color ReplacementC. Magic EraserD. Brush


Explanation


QUESTION 219Which of the following should you use to create a gradient that automatically aligns with a type layer'scontents even when you edit the text?

A. Gradient overlayB. Gradient pickerC. Linear gradientD. Radial gradient



QUESTION 220You want to add a gradient on the current layer. Which technique should you use?

A. In the Layers panel, click the "Create new fill or adjustment layer" icon and choose Gradient.B. Select the Gradient tool, select a gradient from the Gradient Picker, and drag in the image.C. Select a gradient swatch in the Swatches panel and then press Alt+Delete to fill the layer with that

gradient.D. Choose Layer, New Fill Layer, Gradient.



QUESTION 221Which key do you press while clicking a layer mask thumbnail in the Layers panel to view the mask in theimage window?

A. AltB. Caps LockC. ShiftD. Ctrl



QUESTION 222To choose a new mask color, what will you do?

A. Click the Color Indicates area > select Masked AreasB. Click the color swatch > choose a new colorC. Click the color swatch > change the opacity

D. Click the Color Indicates area



QUESTION 223Gray pixels in a layer mask make the corresponding image pixels:

A. Hard-edgedB. InvertedC. More grayD. Semi-transparent



QUESTION 224Which of the following are the correct methods to create gray pixels within a layer mask? Each correctanswer represents a complete solution. Choose three.

A. Create a gradient within a layer mask.B. Paint in the layer mask with a hard-edged brush.C. Apply a blur filter to the layer mask.D. Use the Masks panel to add a feathered edge.


Explanation/Reference:Explanation:Answer options A, D, and C are correct. The following are the ways to create gray pixels within a layermask.

QUESTION 225How can you view a selection as a temporary colored overlay instead of as a marquee?

A. In the Tools panel, click the Edit in Quick Mask Mode button.B. Choose View, Show, None.C. Choose View, Show, Selection Edges to uncheck it.D. Choose View, Extras.



QUESTION 226To view an alpha channel's contents as a colored overlay over the original image, you should:

A. Press Alt+click.B. Choose View, Extras.C. Select it and view the composite RGB channels at the same time.D. Select it and enter Quick Mask mode.



QUESTION 227What is the lowest value of opacity that can be entered in the opacity box of the Quick Mask Options dialogbox?

A. -50B. 0C. 10D. -10



QUESTION 228Which of the following options in the Refine Edge dialog box changes the level of decontamination andfringe replacement?

A. AmountB. Decontaminate ColorsC. FeatherD. Output To



QUESTION 229In the filter layers drop-down menu of the Layers panel, which of the following options filters the layershaving Type, or Shape layers, or Smart Objects?

A. NameB. KindC. ModeD. Attribute



QUESTION 230In Layers Panel, which of the following key combinations is used on the Add Layer Mask button to create amask that hides the selection?

A. Tab+ClickB. Ctrl+ClickC. Shift+ClickD. Alt+Click



QUESTION 231How can you use the Channels panel to add to a saved selection?

A. While viewing the image, Ctrl+click the alpha channel containing the selection; then paint with white.B. Click the alpha channel containing the selection to display it in the image window; then paint with white.C. Click the alpha channel containing the selection to display it in the image window; then paint with black.D. While viewing the image, Ctrl+click the alpha channel containing the selection; then paint with black



QUESTION 232Additional channels you add to the Channels panel are known as:

A. Alpha channelsB. Selected channelsC. Saved channelsD. Beta channels



QUESTION 233In Quick Mask mode, how can you add to a selection?

A. Choose Select, Grow.B. Paint with white.C. Paint with black.D. Choose Select, Modify, Expand.



QUESTION 234Which of the following dialog boxes is used when refining a selection in an image?

A. Refine MaskB. Refine EdgeC. PresetD. Work path



QUESTION 235Which of the following options from the Select menu is used to make sure that no part of your image isselected?

A. AllB. ReselectC. InverseD. Deselect



QUESTION 236You want to flow type along a curving path. What should you do?

A. Use the Path Type tool.B. Select the path in the Paths panel, and click with the Type tool at the location where you want to begin

adding type.C. Select a type layer and a shape layer; then choose Layer, Bind Type to Path.D. You can't flow type along a vector path in Photoshop.



QUESTION 237Which of the following are the ways to use vector paths that appear directly in the image, not just in thePaths panel?


A. Stroking a pathB. Designating each pixel's visibilityC. Converting a type layer to a path and editing its shape

D. Creating a shape layer


Explanation/Reference:Explanation:Answer options C, D, and A are correct.

QUESTION 238How can you save a work path as a permanent path?

A. In the Paths panel, double-click the work path; then enter a new name and click OK.B. In the Paths panel, select the work path and click the "Load path as a selection" icon.C. Create a selection with any selection tool; then choose Make Work Path from the Paths panel menu.D. In the Paths panel, select the work path and click the "Fill path with foreground color" button.



QUESTION 239Which of the following are advantages of using vector drawing tools versus using raster drawing tools?[Choose all that apply.]

A. You can add or remove selected areas in Quick Mask mode.B. You can create geometric graphics that are easy to draw and modify.C. You can create paths in the Paths panel that store semi-transparency information.D. You can select and mask image areas that have clearly defined shapes, such as smoothly flowing

curves.



QUESTION 240Which of the following is used to hide parts of a layer with a vector path?

A. Work pathsB. SwatchC. Vector maskD. Warp



QUESTION 241Which of the following determine the curvature of its segments?

A. A path's corner pointsB. A path's anchor pointsC. A path's direction pointsD. A path's smooth points



QUESTION 242Which tool cannot directly create a vector path?

A. RectangleB. PenC. LassoD. Custom Shape



QUESTION 243True or false? A path that appears in the Paths panel might contain a secondary path called a subpath.

A. FalseB. True



QUESTION 244How can you convert a selection to a path?

A. Choose Select, Load Selection.B. Choose Select, Save Selection.C. In the Paths panel, click the "Make work path from selection" icon.D. In the Paths panel, click the "Load path as a selection" icon.



QUESTION 245You want to create a solid-colored geometric object whose shape you can easily modify later. Which type oftools should you use to create the shape?

A. Vector drawing tools

B. Selection toolsC. Raster drawing toolsD. Pixel-based drawing tools



QUESTION 246True or false? "Vector mask" and "clipping path" are interchangeable terms.

A. TrueB. False



QUESTION 247Which of the following options for the Shape tools is used to replace the current list of shapes with thedefault list?

A. Reset ShapesB. Rename ShapeC. View optionsD. Preset Manager



QUESTION 248You're creating a logo based on type you've entered with the Type tool. You want to use the DirectSelection tool to reshape the characters to add visual interest. What must you do to the type layer beforeyou can reshape the letters with the Direct Selection tool?

A. Choose Layer, Type, Warp Text.B. Choose Layer, Type, Convert to Shape.C. Choose Layer, Rasterize, Type.D. Choose Layer, New Layer Based Slice.



QUESTION 249To choose exactly where anchor and direction points will be placed along a vector path as you create it,which tool should you use?

A. The Polygon toolB. The Pen toolC. The Ellipse toolD. The Lasso tool



QUESTION 250True or false? A vector path must pass through each direction point.

A. FalseB. True



QUESTION 251While working with the Liquify filter, which of the following distortion tools options sets the speed at whichdistortions are made when you drag a tool in the preview image?

A. Brush PressureB. Brush SizeC. Brush DensityD. Brush Rate



QUESTION 252Which command should you choose to have the most control over converting an image from RGB tograyscale?

A. Image, Adjustments, DesaturateB. Image, Mode, GrayscaleC. Image, Adjustments, Black & WhiteD. Image, Mode, Bitmap



QUESTION 253To adjust how each ink in a duotone image is distributed throughout various tonal regions, which of the

following should you adjust?

A. Cutout filterB. Smart filterC. Stacking orderD. Duotone curve



QUESTION 254When using the Liquify filter, what tool can you use to protect specific areas of the image?


A. The Thaw Mask tool.B. The Freeze Mask tool.C. The Reconstruct tool.D. The Forward Warp tool.



QUESTION 255Which of the following can you apply to a selection or layer? [Choose all that apply.]

A. A custom warp.B. A preset warp and a custom warp at the same time.C. None; you can apply a warp only to an entire layer, not to a selection.D. A preset warp.



QUESTION 256True or false? After you apply a warp to type, the text remains editable.

A. TrueB. False

Correct Answer: A



QUESTION 257For you to create a duotone image, the image must be in _______________ mode.

A. GrayscaleB. Indexed ColorC. CMYKD. RGB



QUESTION 258An RGB Color image's file size is __________ the same image converted to Grayscale mode.

A. Six times larger thanB. Seven times larger thanC. Three times larger thanD. One-third the size of



QUESTION 259In which of the following menus can a user find the Warp tool?

A. TypeB. EditC. ImageD. Layer



QUESTION 260While using the Puppet Warp tool, you want to delete a pin. Which of the following are methods you canuse to do this? [Choose all that apply.]

A. Press Ctrl and click the pin.B. Press Alt and click the pin.C. Press Esc.D. Select the pin and press Delete.



QUESTION 261While working with the Warp tool, which of the following options from the View menu is used to show orhide the warp mesh and control points?

A. ExtrasB. ShowC. Screen ModeD. Rulers



QUESTION 262Which is not an option for the number of inks you can specify for an image in Duotone mode?

A. FiveB. TwoC. ThreeD. Four



QUESTION 263Which of the following options from the Photoshop's File menu is used to create Batch processing Droplet?

A. Automate > PhotomergeB. Automate > Create DropletC. Automate > BatchD. Automate > Conditional Mode Change



QUESTION 264In Camera Raw, which tool would you use to the exposure and other settings for a particular area?

A. Targeted Adjustment tool.B. Adjustment Brush.C. Graduated Filter.

D. Spot Removal tool.



QUESTION 265Which of the following files can hold both the pixel data and the data specifying how the image should look?

A. TIFFB. Camera rawC. PSDD. DNG



QUESTION 266Which statement is not true of opening a camera raw file in Photoshop?

A. You can save settings to apply to other images.B. You can choose the level of JPEG compression.C. You can open the resulting image with a color depth of 16 bits/channel.D. You can adjust the white balance.



QUESTION 267To make a minor correction in an image in Camera Raw, you will use:

A. Healing brushesB. Spot Removal brushC. Paint brushD. History brush



QUESTION 268Unlike camera raw files, ________ files are not proprietary, and they can hold both the pixel data and thedata specifying how the image should look within one file, not requiring a sidecar file.

A. PSDB. DNG

C. JPEGD. TIFF



QUESTION 269Which of the following sliders of the Detail tab in Camera Raw controls the color noise threshold?

A. Color DetailB. Luminance ContrastC. Luminance DetailD. Luminance



QUESTION 270What program can you use to select multiple images at once and apply the same Camera Raw settings toall of them?

A. Windows ExplorerB. PhotoshopC. Adobe BridgeD. None (you can't do this)



QUESTION 271What are the advantages of using the camera raw format? [Choose all that apply.]

A. Post-processing is performed automatically.B. Post-processing specified by the camera is stored as metadata with the image.C. It produces an image with the highest possible quality.D. It produces an image with a smaller file size.



QUESTION 272To quickly rename a folder of 100 images with a consistent naming scheme, what should you use?

A. Actions panel.

B. Batch Rename.C. Photomerge.D. Image Processor.



QUESTION 273True or false: You cannot display all of the tonal levels in an HDR file at once on a typical computer monitor.

A. FalseB. True



QUESTION 274What color depth is typical for High Dynamic Range (HDR) images?

A. 8-bitB. 16-bitC. 32-bitD. 64-bit



QUESTION 275Which slider in the Unsharp Mask dialog box controls the width of the "halo" that appears at contrastingedges?

A. Radius.B. Amount.C. You can't control the halo width.D. Threshold.



QUESTION 276Which filter should you apply to best simulate a reduced depth of field created by a photographer?

A. Lens CorrectionB. Radial Blur

C. Lens BlurD. Gaussian Blur



QUESTION 277To change the visible tonal range of an HDR image, choose ________ from the status-bar menu.

A. EfficiencyB. Document ProfileC. Scratch SizesD. 32-bit Exposure



QUESTION 278In the Smart Sharpen dialog box, specifying a higher Amount value ________, thus making the imageappear sharper.

A. Increases the noise in the imageB. Reduces the noise in the imageC. Decreases the contrast between edge pixelsD. Increases the contrast between edge pixels



QUESTION 279While working with the Photomerge option, which of the following layout options aligns overlapping contentbut doesn't transform the source layers?

A. RepositionB. CylindricalC. SphericalD. Perspective



QUESTION 280How does Photoshop's Merge to HDR command work?

A. It merges multiple images into a collage.B. It allows you to combine multiple resolutions, ranging from low to high.C. It merges multiple images into a panorama.D. It allows you to combine multiple exposures, ranging from dark to bright.



QUESTION 281In which section of the Color Settings dialog box can you specify what happens when you open an imagewith an embedded color space different from the default color space?

A. Working SpacesB. Advanced ControlsC. Conversion OptionsD. Color Management Policies



QUESTION 282Which of the following statements about color modes are true? [Choose all that apply.]

A. CMYK has a larger gamut than RGB.B. Adobe RGB (1998) has a larger gamut than sRGB.C. CMYK and RGB have the same gamut.D. RGB has a larger gamut than CMYK.



QUESTION 283If you wanted to work in a different color space, changing the values without changing the appearance,what would you typically do?

A. Recalibrate your monitor.B. Download a color space from the manufacturer's Web site.C. Convert to a different color space.D. Assign a different color space.



QUESTION 284Which color management policy displays an image in its embedded color space when the image doesn'tmatch the working color space?

A. Convert to Working RGBB. Preserve Embedded ProfilesC. Discard the embedded profileD. Off



QUESTION 285Which of the following options in the Print dialog box sets the units used for the Position and Scaled PrintSize options?

A. LayoutB. PreviewC. UnitsD. Position



QUESTION 286True or false: The working color space represents the color mode you intend to use most often.

A. TrueB. False



QUESTION 287When you print a color-managed image, what must you select in order to specify the rules for how thesource colors are adjusted for out-of-gamut colors?

A. A rendering intentB. A printer profileC. A color spaceD. A color mode



QUESTION 288If you want to print an image using a color management profile for a specific printer and paper type, whichof the following should you do? [Choose all that apply.]

A. Select the Printer Manages Colors option.B. Select the Photoshop Manages Colors option.C. In the printer's Advanced settings, disable printer color conversion.D. In the printer's Advanced settings, enable printer color conversion.



QUESTION 289If you specify a color setting for North America or Europe, which rendering intent is selected by default?

A. Relative ColorimetricB. SaturationC. PerceptualD. Absolute Colorimetric



QUESTION 290You should prevent the printer from performing any additional color conversions if which of the followingstatements are true? [Choose all that apply.]

A. You're printing to an inkjet printer without built-in profiles for color conversions.B. You're printing to a PostScript printer.C. The printer has settings for the specific paper you're using.D. You're using a paper type with a profile that's not built into the printer driver.



QUESTION 291To preview images onscreen as they'd appear when printed on your printer, you should choose commandsfrom the __________ submenu.

A. Image, AdjustmentsB. Image, ModeC. View, Proof SetupD. View, Screen Mode

Correct Answer: CSection: (none)

Explanation


QUESTION 292True or false: A neutral gray has matching cyan, magenta, yellow, and black values.

A. TrueB. False



The cyan value must be higher than the magenta and yellow values.

QUESTION 293For what purpose should you generally not use RGB Color mode?

A. Applying overall color correctionB. Printing to an inkjet printerC. Sending an image to a commercial printerD. Purchasing prints on photographic paper



QUESTION 294Which of the following is used to create a color separation from an RGB file?

A. Choose Image, Mode, CMYK Color.B. Choose the CMYK channel.C. Choose the Custom CMYK dialog box.D. Choose the Color Settings dialog box.



QUESTION 295True or false: You should base the CMYK settings you choose on the printing conditions, such as the pressand paper type.

A. TrueB. False



QUESTION 296You're editing a CMYK curve by using the Curves options in the Adjustments panel, after having edited anRGB curve. What is different?

A. The CMYK curve is flatter.B. Highlights and shadows are in reverse order from left to right and top to bottom.C. The curves are the same.D. The CMYK curve is steeper.



QUESTION 297Which of the following factors contribute to an image's file size?


A. Pixel countB. Number of colorsC. Image resolutionD. Compression


Explanation/Reference:Explanation:Answer options A, B, and D are correct.

QUESTION 298Which of the following frame disposal methods determines a disposal method for the current frameautomatically?

A. Do Not DisposeB. AutomaticC. DisposeD. Position



QUESTION 299How can you change the appearance of a single animation frame without affecting other animation frames?

A. In the Timeline panel, select a frame; then choose a filter from the Filter menu.B. In the Timeline panel, select a frame; then choose Specify Frame Visibility from the panel menu.C. In the Timeline panel, select a frame; then use the Layers panel to specify the layer content that is

visible.D. In the Timeline panel, select a frame; then use the Channels panel to specify the channels that are

visible.



QUESTION 300Which of the following creates additional frames by automatically blending two existing ones?

A. TweeningB. Soft proofC. Specular highlightD. Trimming



QUESTION 301If you have a target file size for an image, what command should you choose from the Optimize menu inthe Save for Web dialog box?

A. Repopulate ViewsB. Auto Select GIF/JPEGC. Optimize to File SizeD. GIF 128 Dithered



QUESTION 302Why is the Unsharp Mask filter often better than the simple Sharpen filter?

A. The Sharpen filter can produce a dull border around the image.B. The Unsharp Mask filter offers a greater degree of control than does the Sharpen filter.C. The Sharpen filter can over-sharpen an image.D. The Unsharp Mask filter is not subject to pixelation the way the Sharpen filter is.



QUESTION 303How can you simulate transparency in a JPEG image that will appear on the Web?

A. Check Transparency in the Save for Web dialog box.B. Check Interlaced in the Save for Web dialog box.C. Use the Opacity slider in the Layers panel.D. Specify a Matte color in the Save for Web dialog box.



QUESTION 304In the Save for Web dialog box, you can use _________ views to compare two or more versions of animage.

A. repopulateB. file previewC. multiple viewD. n-up



QUESTION 305True or false? It's important to save Web images at a resolution of no more than 96 ppi.

False

A. True


Explanation/Reference:Explanation:The pixel count, not the number of pixels per inch, is what matters.

QUESTION 306True or false? All frames in an animation must have the same duration.

A. FalseB. True



QUESTION 307Frame rate is defined as which of the following?

A. The number of frames dropped.

B. The number of video frames per minute that display in a video.C. The number of video frames per second that display in a video.D. The total number of frames in a video.



QUESTION 308Which of the following options in the Render Video dialog box is used to specify how to matte alphachannels into the video?


A. Frame RateB. 3D QualityC. Alpha ChannelD. Size



QUESTION 309If you open a video project and the images appear unusually elongated (e.g., circular objects appear asovals), you should verify that __________ is enabled.

A. Image caching.B. Pixel aspect ratio correction.C. Broadcast standard conversion.D. Frame aspect ratio correction.



QUESTION 310You're exporting a video that will be viewed primarily online. Which format should you use?

A. Photoshop Image Sequence.B. H.264.C. DPX.D. QuickTime.



QUESTION 311Which of the following methods are used for importing video into a Photoshop document?


A. In the Timeline panel, choose Enable Timeline Shortcut Keys.B. Open an existing video.C. Choose Layer, Video Layers, New Video Layer from File.D. In the Timeline panel, click the filmstrip icon and choose Add Media.



QUESTION 312Which of the following options needs to be checked while importing image sequences?

A. PlaceB. CancelC. Look inD. Image Sequence



QUESTION 313If you want to quickly preview your video, you should press which of the following?

A. 0 on the numeric keyboard.B. Spacebar.C. Shift+0.D. Shift+Spacebar.



QUESTION 314Which of the following commands is used to group layers in a video or animation?

A. Layer > Group LayersB. Layer > RasterizeC. Layer > Merge Visible

D. Layer > Merge Down



QUESTION 315If you have a clip that is 2.5 seconds too long, how can you make it shorter?


A. Drag the Out point of the video track to the left.B. Display the Video panel for the clip and edit its duration.C. Drag the Out point to the right.D. Drag Fade With White to the indicated position.



QUESTION 316To restrict the effects of a Fill or Adjustment layer on a Video layer, what will you do?

A. Click on the fx button.B. Choose layer > layer style.C. Choose layer > Restrict effect.D. Convert the Video layer to a Smart Object.



QUESTION 317Choose the correct file format in the Format menu that supports documents up to 300,000 pixels in anydimension and all Photoshop features.

Hot Area:

Correct Answer:


Explanation/Reference:The Large Document Format (PSB) supports documents up to 300,000 pixels in any dimension. It supportsall Photoshop features, such as layers, effects, and filters.

QUESTION 318You work as a graphic designer for WEBDESIGN Inc. You are creating a vector shape in Photoshop CS6.You want to load a set of shapes from a previously saved file. Mark the correct option in the list of theshape tool.

Hot Area:

Correct Answer:


Explanation/Reference:You should use the Replace Shapes option; it allows you to load a set of shapes from a previously savedfile. The current list of shapes is replaced by the new

QUESTION 319 You are working as a graphic designer for WEBDESIGN Inc. You are interpreting video footage inPhotoshop CS6. You want to specify the matte color with which the channels are already multiplied. Choosethe correct option in the Alpha Channel option to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference: In the Interpret Footage dialog box, select the Alpha Channel option to specify how the alpha channel in thevideo layer is interpreted. For this option to be available, the footage must have an alpha channel. IfPremultiplied-Matte is selected, you can specify the matte color with which the channels are premultiplied.

QUESTION 320Identify the different components of the Photoshop workspace.

Correct Answer: plz follow steps,Section: (none)Explanation

Explanation/Reference:The following are the components of the Photoshop workspace:

The following table describes the components of the Photoshop workspace:

ComponentsDescriptions

Application barIt contains a workspace switcher, menus (Windows only), and other application controls.

Tools panelIt contains tools for creating and editing images, artwork, page elements, and so on.

Control panelIt displays options for the currently selected tool.

PanelsIt helps you monitor and modify your work.

Document windowIt displays the file you are working on.

QUESTION 321 You work as a graphic designer for WEBDESIGN Inc. You are using the Burn tool in Photoshop CS6. Youwant to change the light areas in an image. Choose the correct option in the Range menu to accomplish the

task.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Highlights option from the Range menu to change the light areas in the image.

The following table describes the Range menu options: OptionsDescriptionsMidtonesIt is used to change the middle range of grays in an image.ShadowsIt is used to change the dark areas in an image.HighlightsIt is used to change the light areas in an image.

QUESTION 322 You work as a graphic designer for WEBDESIGN Inc. You want to assemble sets of images into stacks forprocessing as high dynamic range (HDR) or panoramic composites in Photoshop CS6. Choose the optionthat you will select to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference:The Auto Collection CS6 script in Adobe Bridge assembles sets of images into stacks for processing ashigh dynamic range (HDR) or panoramic composites in Photoshop CS6. The script collects images intostacks based on capture time, exposure settings, and image alignment.

QUESTION 323You work as a print designer for WEBDESIGN Inc. You are using the Magic Wand tool in Photoshop CS6.You want to make smoother edge selection. Choose the correct option in the Option bar to accomplish thetask.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Anti-alias option to make smoother edge selection.

OptionsDescriptionsToleranceDetermines the color range of selected pixels. You should enter a value in pixels, ranging from 0 to 255. Alow value selects the few colors very similar to the pixel you click. A higher value selects a broader range ofcolors.Anti-aliasIt makes smoother edge selection.ContiguousOnly same color adjacent areas are selected.Sample All Layers

Selects colors using data from all the visible layers; otherwise, the Magic Wand tool selects colors from theactive layer only.

QUESTION 324You work as a graphic designer for WEBDESIGN Inc. You are adding file information in Photoshop CS6.You want to include additional identifying information about photo content, including rights-related details.Mark the correct tab/option you will use in the File Info dialog box to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference:You will use the IPTC Extension tab. IPTC Extension is used to include additional identifying informationabout photo content, including rights-related details.

QUESTION 325 Match the Swatches color options with their purposes.

Select and Place:

Correct Answer:


Explanation/Reference:The following table describes the Swatches color options and their purposes: OptionsPurposesPaint with whiteTo select more of an imagePaint with blackTo deselect areasPaint with gray or another colorTo create a semi-transparent area, useful for feathering or anti-aliased effects

QUESTION 326You work as a graphic designer for WEBDESIGN Inc. You are generating a gallery using Adobe Bridge, butthe FTP server is not accepting multibyte characters. Choose the option to remove multibyte charactersfrom the file name.

Hot Area:

Correct Answer:


Explanation/Reference: In the Output pane of Adobe Bridge preferences, specify the following:

QUESTION 327Choose and reorder the required steps that you will take to create a tool preset.

Select and Place:

Correct Answer:


Explanation/Reference:The required steps to create a tool preset are as follows: After saving a tool preset, you can select it from the Tool Preset picker or from the Tool Presets panel. Ifyou want to reset the current tool to its default settings, then right-click the Tool Preset icon on the optionsbar and choose Reset Tool.

QUESTION 328You work as a print designer for WEBDESIGN Inc. You are working in Adobe Bridge. You have given ratingin a file but now you want to add a Reject rating in the file. Mark the option that you will use to accomplishthis task.

Hot Area:

Correct Answer:


Explanation/Reference:To add a Reject rating, you will choose Label > Reject or press Alt+Delete (in Windows OS) or Option+Delete (in Mac OS).

QUESTION 329You work as a print designer for WEBDESIGN Inc. You want to process an image from a scanner in Batchprocessing. Choose the option in the Source pop-up menu to accomplish the task.

Correct Answer: Follow the steps.Section: (none)Explanation

Explanation/Reference: You should choose the Import option in the Source pop-up menu to accomplish the task. The followingtable describes the Source menu options:Source menu optionDescriptionFolderIt processes files in a folder you specify.ImportIt processes images from a digital camera, scanner, or a PDF document.Opened FilesIt processes all open files.BridgeIt processes selected files in Adobe Bridge. If no files are selected, the files in the current Bridge folder areprocessed.

QUESTION 330You work as Professional photographer for WEBDESIGN Inc. You are working with multiple photos. Youwant to print them together by creating a PDF contact sheet so that you can see them all at once. Choose

and reorder the required steps that you will take in order to create a PDF contact sheet.

Select and Place:

Correct Answer:


Explanation/Reference:When you're working with multiple photos, it is sometimes helpful to print them so that you can see them allat once. You can print them together by creating a PDF contact sheet.To create a contact sheet:

QUESTION 331Match the Adobe Bridge workspace components with their descriptions.

Select and Place:

Correct Answer:

Section: (none)

Explanation

Explanation/Reference:The following table describes the Adobe Bridge workspace components:ComponentsDescriptionsApplication barProvides buttons for essential tasks, such as navigating the folder hierarchy, switching workspaces, andsearching for files.Favorites panelGives you quick access to frequently browsed folders.Content panelDisplays files specified by the navigational menu buttons, Path bar, Favorites panel, Folders panel, orCollections panel.Output panelContains options for creating PDF documents and HTML or Flash web galleries. It appears when theOutput workspace is selected.

QUESTION 332You work as a graphic designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6.You want to perform exposure compensation in the image that has darkened edges caused by improperlens shading. Select the option in the Photomerge dialog box to accomplish the task.

Hot Area:

Correct Answer:


Explanation/Reference:You should select the Vignette Removal option in the Photomerge dialog box. This option is used to removeand perform exposure compensation in images that have darkened edges caused by lens flaws orimproper lens shading.The following are the Photomerge composition options and their descriptions:

QUESTION 333You work as a graphic designer for WEBDESIGN Inc. You are using the HSL / Grayscale tab to adjustindividual color ranges. You want to change the vividness of the color. Mark the option/tab you will use toaccomplish the task.

Correct Answer: You should use the Saturation tab for changing the vividness or purity of the color. Forexample, you can change a blue sky from gray to highly saturated blue. Hue is used for changing the color.For example, you can change a blue sky (and all other blue objects) from cyan to purple. Luminance isused for changing the brightness of the color range.Section: (none)Explanation


QUESTION 334 Match the Mesh settings options with their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:You can adjust the following mesh settings in the Options bar:

QUESTION 335You work as a graphic designer for WEBDESIGN Inc. You are creating frames using tweening in

Photoshop CS6. You want to add frames between the selected frame and the following frame. Choose theoption in the Tween With menu to accomplish the task.

Hot Area:

Correct Answer:



You should choose the Next Frame option in the Tween With menu.The following table describes theoptions in the Tween With menu:Tween With optionsDescriptionsNext FrameAdds frames between the selected frame and the following frame. This option is not available when youselect the last frame in the Timeline panel.First FrameAdds frames between the last frame and first frame. This option is available only if you select the last framein the Timeline panel.Previous FrameAdds frames between the selected frame and the preceding frame. This option is not available when youselect the first frame in the Timeline panel.Last FrameAdds frames between the first frame and last frame. This option is available only if you select the first framein the Timelinepanel.

QUESTION 336 You are working as a graphic designer for WEBDESIGN Inc. You are using Onion skin for a video clip inPhotoshop CS6. You want to show every other frame in the video clip. Write the correct value in the FrameSpacing field to accomplish this task.

Correct Answer: Please follow Explanation.Section: (none)Explanation


The Frame Spacing field determines whether the frames are being shown in consecutive manner orappear with gaps between the frames. A setting of 1 displays the frames in consecutive order. A setting of 2displays strokes that are two frames apart.

QUESTION 337You work as a graphic designer for WEBDESIGN Inc. You are working on a 3D image in Photoshop CS6.You want to save the image for the high-end graphic application. Perform the correct steps to accomplishthe task.

Correct Answer: Use the following steps as:Section: (none)Explanation


To save the image for the high-end graphic application, perform the following steps:

QUESTION 338Match the Gradient Fill options with their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:The following are the Gradient Fill options:

QUESTION 339You work as a graphic designer for WEBDESIGN Inc. You are saving an image for the Web in PhotoshopCS6. You want to save all metadata, but you do not want to save EXIF data about camera settings. Choosethe correct option in the Metadata menu to accomplish the task.

Correct Answer: Follow this:Section: (none)Explanation


You should choose the All Except Camera Info option in the Metadata menu to save all metadata, exceptEXIF data about camera settings.

The following table describes the Metadata menu options: OptionsDescriptionsNoneIt does not save metadata (except for the EXIF copyright notice in JPEG files). It produces the smallest filesize.CopyrightIt saves copyright notice, rights usage terms, copyright status, and copyright info URL.Copyright and Contact InfoIt saves all copyright information. It also saves the following information: creator, creator job title, e-mail(s),address, city, state/province, postal code, country, telephone(s), and website(s).All Except Camera InfoIt saves all metadata, except EXIF data about camera settings like shutter speed, date and time, focallength, exposure compensation, metering pattern, and flash use.AllIt saves all metadata in the file.

QUESTION 340Drag and drop the Photoshop CS6 components to match up with their functions.

Select and Place:

Correct Answer:


Explanation/Reference: The following table describes the components of the Photoshop window: ComponentsFunctionTools panelContains tools to select, draw, paint, edit, and view images. You can also choose foreground andbackground colors, create quick masks, and use tools to rotate, move, and zoom the image.Documents tabsDisplay the name of the file you're working on, the current magnification, and the document's color mode.Options barDisplay the various options and settings for a selected tool. The options vary depending on the active tool.Panel dockContains panel groups, which display options and commands you can use to modify images. Panel can bedocked or floating.Workspace switcherContains options for displaying panels related to specific operations, such as motion, painting, photography,or typography. The Essential workspace is the initial selection.Document statistics boxDisplays data about the open image. You can show data such as document size and profile.

QUESTION 341Match the Filter options with their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference: The following are the Filter options and their descriptions: OptionsDescriptions

KindDirects Photoshop to filter the type of layers you want to see. Use the buttons to the right of the menu tohave Photoshop display only the Image, Adjustment, Type, or Shape layers, or Smart Objects.NamePhotoshop displays only the layers whose names include what you entered. It is not case-sensitive.EffectDirects Photoshop to filter layers based on layer styles.ModeDirects Photoshop to filter layers based on their blend modes, pick this option and then choose the blendmode you are after from the pop-up menu that appears on the right.AttributeDirects Photoshop to filter layers based on whether or not they are visible, empty, locked or linked to otherlayers, clipped to other layers, include a pixel- or vector-based layer mask, include effects, or use advancedblending options.ColorDirects Photoshop to filter layers labeled with a certain color.

QUESTION 342You work as a print designer for WEBDESIGN Inc. You are using the Quick Selection tool in PhotoshopCS6. You want to select smoother selection boundary, without any roughness and blockiness. Select theoption in the Option bar to accomplish the task.

Hot Area:

Correct Answer:


Explanation/Reference: You should select the Auto-enhance option to accomplish the task.

OptionsDescriptionsSample All LayersIt creates a selection based on all layers instead of just the currently selected layer.Auto-EnhanceYou should turn on this option for smoother selection boundary, without any roughness and blockiness.

QUESTION 343Match the following Layer blending modes according to their effects on the image layer.

Select and Place:

Correct Answer:


Explanation/Reference:You can create sophisticated layer effects by applying blending modes, which blend a layer into underlyinglayers in a variety of ways. For example, if you apply the Multiply blending mode to a layer, the pixels in thatlayer combine with pixels in layers below to darken where they overlap. If you apply the Screen blendingmode to a layer, the pixels in that layer combine with pixels in layers below to lighten where they overlap.

QUESTION 344 You work as a graphic designer for WEBDESIGN Inc. You are using Adobe Bridge and you want to restorethe default settings for the Adobe pre-defined workspace. Mark the option that you will use to accomplishthis task.

Hot Area:

Correct Answer:


Explanation/Reference: You should use the Reset Standard Workspaces option. This option restores the default settings for theAdobe pre-defined workspaces (Essentials, Output, etc.).

QUESTION 345 You work as a print designer for WEBDESIGN Inc. You are using the Magic Wand tool in Photoshop CS6.You want to view the unselected areas as a rubylith overlay. Choose the correct option in the SelectionPreview menu to accomplish the task.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Quick Mask option to view the unselected areas as a rubylith overlay.

The following table describes the Selection Preview options:OptionsDescriptionsNoneIt helps you view the original image.GrayscaleIt shows you white for completely selected pixels, gray for partially selected ones, and black for unselectedones.Black MatteIt helps you view the original image for selected pixels, and black for unselected ones. This option is goodfor bright images.White MatteIt shows you the original image for selected pixels, and white for unselected ones. This option is good fordark images.Quick MaskIt helps you view the unselected areas as a rubylith overlay.

QUESTION 346 Fill in the blank with the appropriate feature's name of Adobe Bridge.

______________________provides additional information about the image if you plan to share an imagewith others or you expect that you will need to retrieve it later from among many images.

Correct Answer: MetadataSection: (none)Explanation

Explanation/Reference:If you plan to share an image with others, or you expect that you will need to retrieve it later from amongmany images, it is helpful to addmetadata, or additional information about the image, such as keywords andauthor names. Files generated by digital cameras usually already have some metadata pertaining to

camera settings. This information is stored along with the image data. You or others can then useapplications such as Adobe Bridge or other image catalog programs to view and search by the metadata.metadata_0001SN

QUESTION 347You work as a graphic designer for WEBDESIGN Inc. You are working with Adobe Bridge. You want togenerate the HTML code necessary to display your images as a web gallery. Choose and reorder therequired steps that you will take in order to generate a web gallery.

Select and Place:

Correct Answer:


Explanation/Reference:Choose Essential and select images.

You can use Adobe Bridge to generate the HTML code necessary to display your images as a web gallery.After generating the files, you can upload them to a website.To generate a Web gallery, follow these steps:

QUESTION 348You work as a graphic designer for WEBDESIGN Inc. You are using the Sponge tool in Photoshop CS6.You want to intensify the color's saturation. Choose the correct option in the Mode menu to accomplish thetask.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Saturate option in the Mode menu to intensify the color's saturation.

QUESTION 349You work as a graphic designer for WEBDESIGN Inc. You are using the Polygon tool in Photoshop CS6.You want to make the corners of the polygon smooth anchors instead of corner anchors. Choose thecorrect option in the Options bar to accomplish the task.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Smooth Corners option to make the corners of the polygon smooth anchors insteadof corner anchors.

The Polygon tool provides the following choices from the drop-down list: Polygon tool optionsDescriptionsRadiusUsing the Radius option you can set the radius of the polygon in inches.Smooth CornersUsing the Smooth Corners option you can make the corners of the polygon smooth anchors instead ofcorner anchors.StarUsing the Star option you can indent the line segments between the corner anchors of the polygon towardthe center by the amount you specify in the Indent Sides By field.Smooth IndentsUsing the Smooth Indents option you can make the corners of the indents smooth anchors instead ofcorner anchors.

QUESTION 350 You work as print designer for WEBDESIGN Inc. You are printing an image on a paper using PhotoshopCS6. You want to specify the value that how much each dot of ink will spread when it is applied to thepaper. Mark the option that you will use to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference:You will use the Dot gain option for specifying the value that how much each dot of ink will spread when it isapplied to the paper.

The Dot Gain value identifies the dot gain of the paper on which the image will be printed. Dot gainindicates how much each dot of ink will spread when it's applied to the paper. More absorbent paper, suchas newsprint, will absorb more ink, resulting in greater dot gain. You can specify the Dot Gain value so thatPhotoshop will apply less ink to compensate for the dot gain. The standard Dot Gain value is 20%. Thisvalue indicates that when you specify a 60% halftone dot, for example, it will end up measuring 80% due todot gain.

QUESTION 351 You work as a graphic designer for WEBDESIGN Inc. You have created an image in Photoshop CS6. Youwant to resize the image without resampling. Mark the option that you will use to accomplish the task.

Hot Area:

Correct Answer:


Explanation/Reference:In order to accomplish the task, you should use the Image Size option.

In the Image size option, you will clear the Resample Image option.

QUESTION 352 Match the Filter options with their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference: The following are the Filter options and their descriptions: OptionsDescriptions

KindDirects Photoshop to filter the type of layers you want to see. Use the buttons to the right of the menu tohave Photoshop display only the Image, Adjustment, Type, or Shape layers, or Smart Objects.NamePhotoshop displays only the layers whose names include what you entered. It is not case-sensitive.EffectDirects Photoshop to filter layers based on layer styles.ModeDirects Photoshop to filter layers based on their blend modes, pick this option and then choose the blendmode you are after from the pop-up menu that appears on the right.AttributeDirects Photoshop to filter layers based on whether or not they are visible, empty, locked or linked to otherlayers, clipped to other layers, include a pixel- or vector-based layer mask, include effects, or use advancedblending options.ColorDirects Photoshop to filter layers labeled with a certain color.

QUESTION 353Match the following Liquify tools according to their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:The Liquify dialog box contains tools you can use to modify the image in several ways. By default, when youopen the Liquify dialog box, only the Forward Warp, Reconstruct, Pucker, Bloat, and Push Lefttransformation tools are displayed. The following table describes each transformation tool:

QUESTION 354Fill in the blank with the appropriate tool name.

To make some adjustments in an image without changing the image pixels, you can usean_______________ .

Correct Answer: adjustment layerSection: (none)Explanation

Explanation/Reference: To make some adjustments in an image without changing the image pixels, you can use an adjustmentlayer. You can then easily remove or hide that layer to return the image to its original appearance. You canalso continually modify an adjustment layer's settings to experiment with different values.

QUESTION 355You work as a print designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6. Youwant to paint with a sample or pattern to repair imperfections in the image. Choose the correct tool toaccomplish the task.

Correct Answer: follow the Explanation.Section: (none)Explanation

Explanation/Reference:You should choose the Healing Brush tool to paint with a sample or pattern to repair imperfections in theimage. The following table describes the Retouching tools: Retouching toolsDescriptionsSpot Healing Brush toolIt removes blemishes and other imperfections from the image.Healing Brush tool

It paints with a sample or pattern to repair imperfections in an image.Patch toolIt repairs imperfections in a selected area of an image using a sample or pattern.Content aware toolIt selects and moves a part of a picture.Red Eye toolIt removes the red reflection caused by a flash.

QUESTION 356You work as a graphic designer for WEBDESIGN Inc. You are using the Rectangle tool on a vector shapePhotoshop CS6. You want to create a rectangle of any size. Choose the correct option in the Options bar toaccomplish this task.

Correct Answer: Follow the Explanation.Section: (none)Explanation


Click the down arrow next to the custom shape button to view the following options:

QUESTION 357You work as a graphic designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6.You are repairing an area of the image with the Clone Stamp tool and you have already clipped the image.Now before you stamp it, you want to see that you are cloning. Select the option in the Clone source dialogbox to accomplish this task.

Correct Answer: Please follow the steps.Section: (none)Explanation

Explanation/Reference:You can select Show Overlay in the Clone Source panel. The overlay lets you see what you are cloningbefore you stamp it.

QUESTION 358Match the icons of the transformation tool according to their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:The following table describes each transformation tool:

QUESTION 359Fill in the blank with the appropriate object name.

When applying transformations and other types of changes to layers, you can make those changesnondestructive by converting layers to ________________________ .

Correct Answer: Smart ObjectSection: (none)Explanation

Explanation/Reference:When applying transformations and other types of changes to layers, you can make those changesnondestructive by converting layers to Smart Objects. A Smart Object is an object that acts as a layer butstores the original image data of one or more layers. Smart Objects allow you to transform an image tosmaller sizes and then back to the original size with no loss in quality.


QUESTION 360You work as a graphic designer for WEBDESIGN Inc. You are creating animation in Photoshop CS6. Youwant to change the selected frames with the copied frames. Choose the correct option in the Paste Framesdialog box to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference:The Replace frames option is used to change the selected frames with the copied frames. The propertiesof each existing layer in the destination frames are replaced by those of each copied layer. When you pasteframes between images, new layers are added to the image; however, the existing layers are hidden andonly the pasted layers are visible in the destination frames.

When you paste frames into the same image, the PasteOver Selection option doubles the number of layers in the image, It adds the contents of the pasted framesas new layers in the image. In the destination frames, the newly pasted layers are visible, and the originallayers are hidden. In the non-destination frames, the newly pasted layers are hidden.When you pasteframes between images, the Paste Before Selection or Paste After Selection option is used to add thecopied frames before or after the destination frame. New layers are added to the image; however, only thepasted layers are visible in the new frames (the existing layers are hidden).

QUESTION 361Match each layer style with its usage.

Select and Place:

Correct Answer:


Explanation/Reference:The following table describes about layer styles and their usages:

QUESTION 362You are working on a video in Photoshop CS6. You want to set the CMYK color mode in the video. Markthe button/option that you will use to accomplish this task.

Correct Answer: Please follow it:Section: (none)Explanation

Explanation/Reference:To accomplish this task, you will use the Color Mode option.

QUESTION 363You are working as a graphic designer for WEBDESIGN Inc. You are using a gradient in Photoshop CS6.You want to flip the orientation of the gradient. Choose the option in the Gradient fill dialog box toaccomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference: Reverse is used to flip the orientation of the gradient. Dither is used to reduce banding by applyingdithering to the gradient and Align With Layer uses the bounding box of the layer to calculate the gradientfill.

QUESTION 364You work as a print designer for WEBDESIGN Inc. You are changing thumbnail contents. You want torestrict the thumbnail to the object's pixels on the layer. Choose the correct option in the Layer Panel dialogbox to accomplish the task.

Hot Area:

Correct Answer:


Explanation/Reference:You should select Layer Bounds to restrict the thumbnail to the object's pixels on the layer.

QUESTION 365 Match the icons of the transformation tool according to their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:The following table describes each transformation tool:

Liquify ToolIconDescriptionForward Warp

Stretch and pull pixels in any direction.Pucker

Shrinks and pinches pixels.Bloat

Magnifies and bloats pixels.Reconstruct

Selectively undo and restore distortions.

QUESTION 366

Match the Camera Raw image adjustment tabs with their descriptions.

Select and Place:

Correct Answer:



QUESTION 367 Match the Magic Wand tool options with their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference: The following table describes the Magic Wand tool options: OptionsDescriptionsToleranceIt is used to determine the color range of selected pixels.

Anti-aliasIt is used to make smoother edge selection.ContiguousIt is used to select same color adjacent areas.Sample All LayersIt is used to select colors using data from all the visible layers.

QUESTION 368Match the presets according to their specifications.

Select and Place:

Correct Answer:


Explanation/Reference:When you choose File, New to create a Photoshop file, you can specify the image's size, resolution, colormode, and background color. Rather than specifying each value manually, you can select an option fromthe Preset list to specify a standard size or other preset.

The following table lists a few of the presets available:

PresetSpecificationsDefault Photoshop Size7" × 5" at 72ppiU.S. Paper8.5" × 11" at 300 ppiInternational Paper210 mm × 297 mm at 300 ppiWeb800 pixels × 600 pixels at 72 ppiMobile240 pixels × 320 pixels at 72 ppi.

QUESTION 369

Select and Place:

Correct Answer:


Explanation/Reference: The following table lists several Photoshop selection tools: Selection toolDescriptionSingle Row MarqueeSelects a single row of pixels.LassoSelects irregularly shaped, curving areas.Polygonal LassoSelects irregularly shaped areas made up of straight lines.Magnetic LassoSelects areas that have edges that contrast with the abutting area.Quick SelectionAutomatically detects and selects areas based on defined edges in the image.Magic WandSelects areas that contrast with other image areas.

QUESTION 370You work as a print designer for WEBDESIGN Inc. You are printing an image in Photoshop CS6. You wantto launch a dialog box for the print driver through which you can adjust paper size, paper type, and printquality. Mark the correct button/option you will use to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference: You should use the Print Settings button to launch a dialog box for the print driver. The Photoshop PrintSettings dialog box for the printer gives you more options, such as paper size, paper type, print quality, andso on.

QUESTION 371 You work as a graphic designer for WEBDESIGN Inc. You are selecting a color range in Photoshop CS6.You want to enable the Eyedropper tool and pick the colors from an image. Choose the correct option fromthe Select menu in the Color range dialog box.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Sampled Colors option to enable the Eyedropper tool and pick sample colors fromthe image.

QUESTION 372You work as a graphic designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6.You want to erase solid-colored areas to transparency with a single click. Mark the correct tool toaccomplish the task.

Hot Area:

Correct Answer:



You should use the Magic Eraser tool to erase solid-colored areas to transparency with a single click. Thefollowing table describes the Retouching tools and their descriptions: Retouching toolsDescriptionsMagic Eraser toolIt is used to erase solid-colored areas to transparency with a single click.Eraser toolIt is used to erase pixels and restore parts of an image to a previously saved state.Background Eraser toolIt erases pixels on a layer to transparency as you drag.

QUESTION 373 You work as a graphic designer for WEBDESIGN Inc. You are using the Gradient tool on an image inPhotoshop CS6. You want to add a new custom gradient. Mark the icon/button that you will use to

accomplish the task.

Hot Area:

Correct Answer:



You should use the New Gradient from the Gradient Picker menu to create a custom gradient.

QUESTION 374You work as a graphic designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6.You want to remove the red reflection in the image caused by a flash. Mark the tool to accomplish the task.

Hot Area:

Correct Answer:



You should use the Red Eye tool to remove the red reflection caused by a flash.

You should use the Red Eye tool to remove the red reflection caused by a flash.

Red Eye tool

The following table describes the Retouching tools and their descriptions:

Retouching ToolsDescriptionsSpot Healing Brush ToolIt removes blemishes and other imperfections from the image.Healing Brush ToolIt paints with a sample or pattern to repair imperfections in an image.Patch ToolIt repairs imperfections in a selected area of an image using a sample or pattern.Content-Aware Move ToolIt selects and moves a part of a picture.

QUESTION 375

Match the presets according to their specifications.

Select and Place:

Correct Answer:


Explanation/Reference: When you choose File, New to create a Photoshop file, you can specify the image's size, resolution, colormode, and background color. Rather than specifying each value manually, you can select an option fromthe Preset list to specify a standard size or other preset. The following table lists a few of the presets available:PresetSpecificationsDefault Photoshop Size7" × 5" at 72ppiU.S. Paper8.5" × 11" at 300 ppiInternational Paper210 mm × 297 mm at 300 ppi

Web800 pixels × 600 pixels at 72 ppiMobile240 pixels × 320 pixels at 72 ppi.

QUESTION 376You work as a graphic designer for WEBDESIGN Inc. You are adding a layer style in Photoshop CS6. Youwant to draw outlines around the hard-edge shape by using a color. Choose the correct option in the Layerstyle dialog box to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference:The Stroke option is used to draw outlines around the object on the current layer using color, a gradient, ora pattern. It is particularly useful on hard-edged shapes such as type.

QUESTION 377You are working as professional photographer for Tech Tree Inc. You are working with large number of filesin Photoshop CS6. You want to develop consistent naming conventions and add or remove some namingoptions. Mark the button that you will use to accomplish this task.

Hot Area:

Correct Answer:


Explanation/Reference: Under New Filenames, specify the naming options you want to use. Depending on which options youselect, different settings will be available. Click the minus and plus-sign buttons to add or remove options.

QUESTION 378

Correct Answer: Please follow the explanation.Section: (none)Explanation

Explanation/Reference:You should choose Stroke Thumbnail to display a sample brush stroke and brush thumbnail of each brushpreset. The following table describes the Preset Manager options and their descriptions:

OptionDescriptionText OnlyIt displays the name of each preset item.Small Thumbnail or Large ThumbnailIt displays a thumbnail of each preset item.Small List or Large List

It displays the name and thumbnail of each preset item.Stroke ThumbnailIt displays a sample brush stroke and brush thumbnail of each brush preset.

QUESTION 379You work as a graphic designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6.You want to build a mask based on different color range. Choose the option in the Color Range dialog boxto accomplish this task.

Hot Area:

Correct Answer:



You should select Localized Color Clusters to build a mask based on different color ranges in the images.

QUESTION 380You work as a graphic designer for WEBDESIGN Inc. You want to prevent the display of the Camera Rawdialog box as each camera raw image is processed. Choose the option in the Source to accomplish thetask.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Suppress File Open Options Dialogs option in the Source to prevent the display ofthe Camera Raw dialog box as each camera raw image is processed.

QUESTION 381You work as a graphic designer for WEBDESIGN Inc. You are working with Preset Manager in PhotoshopCS6. You want to change the current brush list with a different library. Mark the correct option from the list

to accomplish the task.

Hot Area:

Correct Answer:

You should use the Replace Brushes from the list to accomplish the task.

QUESTION 382Match the file formats according to their features.

Select and Place:

Correct Answer:


Explanation/Reference:The TIFF file format is compatible with most other applications and suitable for high-qualityprinting. The PNG file format is suitable for Web and complex drawing. The GIF file format decreases thefile size without introducing any distortion. The JPEG file format compresses image data to generate a filewhich is much smaller than the original Photoshop file. The PSD file format preserves the entire featurewhile working with images in Photoshop CS6.

QUESTION 383_________is the process of softening a selection by gradually reducing opacity to a specified number ofpixels extending equally inside and outside a selection edge.

Correct Answer: FeatheringSection: (none)Explanation

Explanation/Reference:Feathering is the process of softening a selection by gradually reducing opacity to a specified number ofpixels extending equally inside and outside a selection edge. Feathering blends a selection with itsbackground by applying transparency to the selection's outer pixels. As the feathering extends outward, itbecomes increasingly transparent. The feathering isn't apparent until you move, cut, copy, or fill theselection.

QUESTION 384Match the following tools according to their descriptions.

Select and Place:

Correct Answer:



QUESTION 385When fixing a large image defect that contrasts sharply with the surrounding area, you will get the bestresults by using the__________ tool.

Correct Answer: PatchSection: (none)Explanation

Explanation/Reference:When fixing a large image defect that contrasts sharply with the surrounding area, you will get the bestresults by using the Patch tool. Painting over a large area with the Healing Brush tool can be time-consuming, and the defect is often not completely removed. You can think of the Patch tool as a way toremove objects from an image.

QUESTION 386Match the Adobe Bridge workspace components with their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:The following table describes the Adobe Bridge workspace components:

QUESTION 387 Match the following Liquify tools according to their descriptions.

Select and Place:

Correct Answer:


Explanation/Reference:The Liquify dialog box contains tools you can use to modify the image in several ways. By default, when youopen the Liquify dialog box, only the Forward Warp, Reconstruct, Pucker, Bloat, and Push Lefttransformation tools are displayed. The following table describes each transformation tool: Liquify ToolIconDescriptionForward Warp

Stretch and pull pixels in any direction.Pucker

Shrinks and pinches pixels.Bloat

Magnifies and bloats pixels.Reconstruct

Reverses the distortion the user has already added.

QUESTION 388Which of the following file formats is a standard Windows image format on DOS and Windows- compatiblecomputers?

A. BMPB. Photoshop EPSC. Photoshop Raw

D. Digital Negative (DNG)



QUESTION 389Which of the following options in the Render Video dialog box is used to render the animation or video as avideo file?

A. Adobe Media EncoderB. Size optionC. Select FolderD. Frame rate



QUESTION 390Which of the following methods are correct to open the Layer Style dialog box to add a layer style?


A. Press Alt and click the Create a new layer icon in the Layer panel.B. In the Layers panel, select a style from the Blending mode list.C. In the Layers panel, click the Add a layer style icon and select the layer style you want to apply.D. Choose Layer > Layer Style, and from the submenu that appears, choose the layer style you want to

apply.


Explanation/Reference:Explanation:To open the Layer Style dialog box, you can do any of the following:Answer options A and B are incorrect. These methods are invalid.

QUESTION 391Which of the following options from the Batch dialog box prevents the display of the Camera Raw dialogbox as each camera raw image is processed?

A. Override Action "Save As" CommandsB. Override Action "Open" CommandsC. Suppress File Open Options DialogsD. Include All Subfolders



QUESTION 392While working with the Merge To HDR, which of the following tone-mapping methods adjusts the intensityof subtle colors?

A. ColorB. Local AdaptationC. Toning CurveD. Edge Glow



QUESTION 393Which of the following selection tools snaps to the edges of defined areas in an image?

A. Magnetic Lasso toolB. Lasso toolC. Single Row Marquee toolD. Elliptical Marquee tool



QUESTION 394Which of the following colors is used to deselect areas while painting in Quick Mask mode?

A. BlackB. GrayC. RedD. White



The following table describes about colors in the Quick Mask mode:OptionsPurposesPaint with whiteTo select more of an imagePaint with blackTo deselect areasPaint with gray or another colorTo create a semi-transparent area, useful for feathering or anti-aliased effects References:


A. Drag it by its tab into the dock, at the top, bottom, or in between other panels.B. Drag it out of the dock by its tab or title bar.C. Drag it into another dock.D. Drag it by its title bar into the dock.



QUESTION 396Which of the following commands is used to import a video file into an open document in Photoshop CS6?

A. File > OpenB. Layer > NewC. File > ExportD. Layer > Video Layers > New Video Layer from File


Explanation/Reference:Explanation:You can open a video file directly or add video to an open document in Photoshop CS6. When you importvideo, the image frames are referenced in a video layer.Do one of the following:

QUESTION 397 You work as a graphic designer for WEBDESIGN Inc. You are using a transition on a video in PhotoshopCS6. You want to fade the first clip out as the second clip fades in. Choose the option to accomplish thetask.

Hot Area:

Correct Answer:


Explanation/Reference:You should choose the Cross Fade option to fade the first clip out as the second clip fades in.

The following table describes the transition styles:Transition styleDescriptionFadeApplying this transition style fades the clip to transparent (empty) pixels.Cross FadeApplying this transition style fades the first clip out as the second clip fades in.Fade With BlackApplying this transition style fades the clip to solid black.Fade With WhiteApplying this transition style fades the clip to solid white.Fade With ColorApplying this transition style fades the clip to the solid color of your choice.

QUESTION 398 You work as a graphic designer for WEBDESIGN Inc. You are working on an image in Photoshop CS6.You want to measure the distance between two points in an image. Mark the correct tool to accomplish thetask.

Hot Area:

Correct Answer:


Explanation/Reference:You should use the Ruler tool to accomplish the task.

The following table describes different tools and their descriptions: ToolsDescriptionsEyedropper toolIt samples colors in an image.Color Sampler toolIt displays color values for up to four areas.Note toolIt makes notes that can be attached to an image.Ruler toolThe Ruler tool measures the distance between two points, and even the angle of lines in an image. It helpsyou position images or elements precisely.

QUESTION 399Fill in the blank with appropriate tool name.

When fixing a large image defect that contrasts sharply with the surrounding area, you will get the bestresults by using the ___________ tool.

Correct Answer: PatchSection: (none)Explanation

Explanation/Reference:When fixing a large image defect that contrasts sharply with the surrounding area, you will get the bestresults by using the Patch tool. Painting over a large area with the Healing Brush tool can be time-consuming, and the defect is often not completely removed. You can think of the Patch tool as a way toremove objects from an image.

QUESTION 400Which of the following options is used in the Output tab to specify the size and quality of JPEG galleryimages in Adobe Bridge?

A. Site InfoB. Color PaletteC. Image InfoD. Output Settings



QUESTION 401Which of the following is NOT a purpose of the vector path?

A. Trimming a layerB. Adding clipping pathsC. Creating geometric graphicsD. Selecting and masking image areas



Trimming a layer is not a purpose of the vector path. The following are purposes of vector paths:Answer options D, C, and B are incorrect. These are purposes of a vector path.

QUESTION 402While using the Polygon tool, which of the following options from the Options bar is used to make thecorners of the polygon smooth anchors instead of corner anchors?

A. Smooth IndentsB. Smooth CornersC. RadiusD. Star



QUESTION 403You work as a professional photographer for WEBDESIGN Inc. You are working on Photoshop CS6. Youwant to select the location where to save the exported file in the Render Video dialog box. Which of thefollowing options will you choose to accomplish this task?

A. Export EncoderB. Frame RateC. SizeD. Select Folder


Explanation/Reference:Explanation:The Select folder option in the Render Video dialog box is used to select the location where to save theexported file.Answer option C is incorrect. The Size option specifies the document size used to generatethe image files.Answer option B is incorrect. The Frame Rate option specifies the number of frames persecond that will be rendered in the video.Answer option A is incorrect. The Exported Encoder option is usedto select Adobe Media Encoder.

QUESTION 404In the Camera Raw window, what setting would you use to neutralize the impact of your environment'slighting so you can properly reproduce image colors?

A. VignettingB. Luminance smoothingC. Tone curveD. White balance



QUESTION 405Which of the following tools displays color values?

A. Color Sampler toolB. Eyedropper toolC. Color Replacement toolD. Zoom tool



QUESTION 406Which of the following most closely simulates the technique of placing a colored filter over a camera lens?

A. Photo filterB. Channel MixerC. HDR ToningD. Desaturate



QUESTION 407What command would you choose from the Image, Adjustments submenu to make the colors in twoimages more similar?

A. Match ColorB. DesaturateC. EqualizeD. Posterize


