carpets dirty? i’m your solutionextractor detergent

Technical DataForm: LiquidColor: Clear light strawpH: 7.0 – 8.0Specific Gravity: 1.038Stability: 1 year minimumChemical Family: Aqueous mixture of surfactants% Actives by Weight: 87%

HMIS RatingNFPA Fire: 0Health: 1Reactivity: 0Personal Protection: Eye, skin irritant

Physical and Chemical CharacteristicsPhysical Hazards: NoneCarcinogenicity: None known

GallonHHED-G | $32.95

QuartHHED-Q | $11.95

How it Works:

Carpets Dirty? I’m Your Solution is a concentrated extraction cleaner formulated to conform with manufacturers’ recommendations for stain resistant carpet. Low foaming anionic wetting agents are the foundation of this detergent. These anionic detergents increase the negative electrostatic field between soil and stain resistant carpet fibers, resulting in quick, effective removal of soil. Any remaining residue dries to a crystal and is easily vacuumed away. The stain resistant treatment remains intact, and your carpet is clean and free of the residue that leads to rapid re-soiling. Special organic sequestering compounds also combat the adverse effects of hard water on stain resistant carpeting.

In other words, your carpets stay clean longer, without changing your carpet color or damaging its fibers and stain resistance.

Helpful Tips:

1. Remove furniture from area to be cleaned, or place protective pads beneath furniture legs to prevent wicking or transfer of stain to your carpet.

2. With a new bag in your vacuum, thoroughly vacuum carpeting.

3. Pre-treat traffic lanes and heavily soiled areas with I’m the Fountain of Youth

for Your Carpets.

4. Pre-treat pet stains with For Spots’ Spots (and Smells, too).

5. Clean your carpet, following your machine manufacturer’s instructions. Make sure your water does not exceed 140 degrees. DO NOT use a heater on your extractor if equipped with one. High temperatures cause poor results and damage your carpet’s stain resistant properties.

6. After cleaning, brush your carpet pile in one direction using a pile brush or shag rake.

7. Most important of all: When carpet is completely dry, put a clean, new bag in your vacuum cleaner, and vacuum thoroughly to remove the final bits of crystallized cleaner and soil.

8. If you are using the Healthy Home detergent in a household type extractor with a reservoir tank for the detergent, mix the detergent with two parts water before filling the solution reservoir. Healthy Home detergent is a concentrated, commercial quality cleaner designed for optimal effects at 1 oz./gallon, while household extractors use a 3 oz./gallon light duty cleaner.

9. There’s no need to use a defoamer or to apply a stain protection treatment to your carpet when using the Healthy Home detergent. Defoamer and stain-protection treatment can cause your carpet to lose its natural stain-resistant properties and re-soil much quicker.

adore your floorwood f loor c leaner and

dust mop t reatment

Technical DataForm: LiquidColor: Slightly yellow clear liquidpH: 5.5Specific Gravity: 0.992Chemical Family: Aqueous solution with

surfactants and solvents% Actives by Weight: 97%

HMIS RatingNFPA Fire: 1Health: 1Reactivity: 0 Personal protection: Eye protection recommended

product may irritate with direct contact

Physical and Chemical CharacteristicsPhysical Hazards: None knownHealth Hazards: May be an irritant with direct

contact or ingestion

How it Works:

Adore Your Floor is a vinegar-based solution with surfactants and organic solvents designed to clean sealed wood, laminate, and vinyl floors. Its unique formula actually enhances the appearance of the floor, is quick drying, requires no rinsing and leaves no haze or residue to dull the original luster of the floor. Its labor saving features also allow it to be used as a dust mop treatment.

Helpful Tips:

1. For daily cleaning, spray a small amount of Adore Your Floor on the head of your dust mop, and dust the floor. Spot clean by spraying a small amount of Adore Your Floor on a folded microfiber cloth.

2. For periodic cleaning (weekly or more often in high traffic areas) lightly spray a 10' X 10' area and spread with a slightly damp head on your microfiber mop. Rinse in clear water, wring dry and proceed to the next area. Always work with the grain of your floor.

3. Extra tough stains and scuffs can be easily removed with You Cook, I’ll

Clean foam cleaner.

4. The first few times you use Adore Your Floor you may notice some streaking or have difficulty moving your mop. Don’t despair; this is simply Adore Your Floor removing old detergent buildup that has made your floor dull and lifeless looking. In no time your mop will glide across the floor, leaving an amazing shine!

24 fl. oz.HHWFC | $10.95

14.5 oz. with applicatorHHDC | $11.95

Technical DataForm: Pressurized liquidColor: Characteristic spray with citrus scentpH: 9.6Specific Gravity: 0.996Chemical Family: Pressurized emulsion of solvents and

surfactants% Actives by Weight: 80

HMIS RatingNFPA Fire: 3Health: 2Reactivity: 0Personal Protection: Gloves and eye protection

recommended (none required)

Physical and Chemical CharacteristicsPhysical hazards: Compressed gas. Avoid

temperatures over 120 degreesHealth: Persons with asthma may experience

discomfort

How it Works:

At Your Disposal is a pressurized emulsion of surfactants and natural citrus solvents formulated to rid garbage disposals and sinks of dirty, greasy build-up and offensive odors. At Your Disposal leaves disposals and sinks fresh and clean with a lasting citrus scent. Its thick foaming action cleans deep down as natural citrus oils break down grease.

Helpful Tips:

1. Shake can well to activate.

2. Wear gloves when using this product and avoid contact with skin, eyes and clothing.

3. With disposal turned off and extension tube attached, spray foam into disposal until foam is visible at rim of disposal or sink drain.

4. Time is your best friend! Allow product to remain in the disposal for 3 –5 minutes.

5. Use a multi-purpose kitchen brush to brush away grime from under the lip of your disposal and other hard to reach areas.

6. Run warm water and run the disposal.

7. After your disposal is clean, repeat at least monthly to keep your sink and disposal fresh and clean.

at your disposalfoaming disposal

c leaner

Technical DataForm: LiquidColor: Amber pH: 8Specific Gravity; 1Chemical Family: Aqueous mixture of surfactants

HMIS RatingHealth: 1Fire: 1Reactivity: 0 Personal Protection: B (eye)

Physical and Chemical CharacteristicsPhysical Hazard: May cause temporary eye irritation with direct contactCarcinogenicity: None known

How it Works:

For Spot’s Spots (and Smells, Too) is a formulation of non-ionic surfactants and proprietary encapsulating deodorants that release and isolate pet stains from carpeting through a synergetic micro-encapsulating action.

Helpful Tips:

1. For best results, treat pet stains as they occur and remove stains with Hey Pet People, I’m Your Carpet’s Best Friend.

2. If the source of the pet odor is unknown, find it using a black light in a darkened room. Spot’s accidents will glow making them easy to locate and treat.

3. Old stains have likely wicked like an iceberg under the carpet and may not be readily seen. Liberally apply For Spot’s Spots, starting at least 12 inches from the edge of visible stain. If the stain has soaked into the pad, it may take several applications and enough to penetrate into the pad to be fully effective.

4. Occasionally the smell may seem worse after cleaning. This just means that the urine has spread further under the carpet than you initially thought. Simply move 24” out from the initially treated area and treat again. It takes some patience, but you will get it eventually. If you have previously tried shampooing the stain out, you may have to treat a very broad area with For Spot’s Spots, and clean with Hey Pet People, I’m

Your Carpet’s Best Friend to remove the old shampoo which has now become a part of the stain.

24 fl. oz.HHPSR | $15.95

for spot’s spots (and smells, too)

pet s ta in and odor remover

Technical DataForm: Pressurized thin liquidColor: ColorlesspH: 11 Specific Gravity: 0.987Stability: 1 year minimumChemical Family: Aqueous blend of ammonia

and solvents% Actives by Weight: 100%

HMIS RatingNFPA Fire: 3Health: 1Reactivity: 1Personal Protection: None required. May irritate skin

and eyes with direct contact

Physical and Chemical CharacteristicsPhysical Hazards: Do not mix with other materialsCarcinogenicity: None known

i do windowsfoaming window

c leaner wi th ammonia

How it Works:

I Do Windows is a non-butyl pressurized aqueous blend of ammonia, solvents and contains isopropyl alcohol for a non-filming, streak-free, rapid drying glass and mirror cleaner. Simply spray and wipe with a dry window/glass microfiber cloth for a smudge-free, streak-free surface. I Do Windows may be used to clean glass and other non-porous hard surfaces, such as chrome.

Helpful Tips:

1. Many glass cleaners contain Butyl products or leave behind a monomolecular shield, intended to prevent further smudging. What really happens is that over time these “left behinds” build up and eventually make cleaning a real chore. Windows spot and smear when wet or if you change glass cleaners. I Do Windows will remove these build-ups and old glass cleaner, leaving you with clear sparkling windows.

2. A little goes a long way. If you see streaks the first time you use I Do Windows, don’t be dismayed! You are loosening and removing your old glass cleaner. You may have to clean the windows an extra time, but removing that old build-up will be worth it!

3. Don’t believe the urban legend of using newspapers to dry your windows. In the old days, news print left a light film of grease that made the windows shine for a while, but they re-soiled quickly. Through the years, printing processes have changed, and they don’t work like they used to. Microfiber is best for glass and windows.

4. I Do Windows works great in bathrooms and fixtures, making them gleam as well – especially chrome faucets!

17 fl. oz.HHWC | $5.95

Technical DataForm: LiquidColor: Clear liquid with beadspH: 7.5Specific Gravity: 1.009Chemical Family: Mixture of surfactants and solvents% Actives by Weight: 90

HMIS RatingNFPA Fire: 0Health: 1Reactivity: 0Personal Protection: None

Physical and Chemical CharacteristicsPhysical Hazards: NoneHealth Hazards: None

How it Works:

I Make Steel Stainless is a ready-to-use emulsion containing no oils, acids or abrasives and formulated specifically for use on stainless steel, chrome, and other surfaces. I Make Steel Stainless quickly removes fingerprints, grease, oil, coffee and food spills, ink and even built up grime from stainless steel, chrome, and other non-porous washable surfaces. A quick application with a damp microfiber cloth and few turns provides a soft, non-greasy protective surface which resists fingerprints, stains and watermarks.

Helpful Tips:

1. For maximum efficiency and time saving, thoroughly clean the area prior to your first use of I Make Steel Stainless with the Healthy Home foaming kitchen cleaner, You Cook, I’ll Clean.

2. Simply spray and wipe, no rubbing required.

3. Repeated use will not cause build-ups which detract from the natural beauty of stainless steel.

4. I Make Steel Stainless works great on faucets and other chrome surfaces to resist water spots, smudges and fingerprints.

i make steel stainlesssta in less s teel c leaner

24 fl. oz.HHSC | $11.95

Technical DataForm: Opaque lotionColor: White with lemon fragrancepH: 8.4Specific Gravity; 0.94Chemical Family: Emulsion of oils and abrasives% Actives by Weight: 80

HMIS RatingNFPA Fire: 1Health: 2Reactivity: 0Personal Protection: None required. Keep out of eyes

Physical and Chemical CharacteristicsPhysical Hazards: Can be an irritant to eyes and

exposed skin. Do not swallow.Carcinogenicity: None known

How it Works:

I Rock At Polishing is a specially-formulated emulsion of food safe oils and mild “bead” abrasives to clean, polish and protect natural and synthetic stone countertops and surfaces, including Corian®. Regular use will provide a stain-resistant glimmering surface. Its emulsion formula prevents I Rock At Polishing from building up and smudging as do some other types of polishes.

Helpful Tips:

1. Prior to use, clean the surface with the Healthy Home foaming kitchen cleaner, You Cook I’ll Clean. The deep foam lifting action will remove the grease, dirt and grime embedded in the grain of your surface.

2. Apply a small amount of I Rock at Polishing to a clean terry or cotton cloth. Do not use microfiber for this job unless it is especially made for polishing. Clean and polish, wiping in a circular motion. Work in an area of around 12 square inches at a time.

3. Several light applications initially will give you a much better overall appearance than one heavy application.

4. On highly polished surfaces, use sparingly and with a damp sponge. The moisture ensures no scratching will occur from surface dust and soiling that wasn’t removed by prior cleaning.

Corian™ is a registered trademark of DuPont.

i rock at polishingfor grani te and marble

24 fl. oz.HHGP | $11.95

Technical DataForm: Liquid with spearmint fragranceColor: ClearpH: 7.6Specific Gravity: 1.005Chemical Family: Aqueous based detergent% Active by Weight: 98%

HMIS RatingNFPA Fire: 0 Health: 2Reactivity: 0Personal Protection: Eye irritant

Physical and Chemical CharacteristicsPhysical Hazards: NoneCarcinogenicity: None known

How it Works:

I’ll Keep Stains Our Little Secret is a unique blend of crystallizing detergents in an aqueous base designed to provide rapid and effective removal of most water and oil soluble stains on carpet, upholstery, and clothing. Its free-rinsing and crystallized detergents also prevent re-soiling of the area.

Helpful Tips:

1. On wet stains, blot up any excess liquid with clean, white absorbent cloth (microfiber is best).

2. Set the sprayer to Stream and surround the stain with a stream of product about 6-8 away from the outer edge of the stain. (This prevents the stain from wicking beneath the carpet or fabric to later return.) Liberally apply I’ll Keep Stains Our Little Secret to the stain and tamp with the edge of a spotting brush, allowing it to penetrate the stain for several minutes. Lightly brush the stain (Do not rub with a cloth). Use the edge of your spotting brush to scrape the liquid towards the center, working from the edges. Then with a clean white microfiber or terry cloth, blot the stain to remove. After the area is dry, vacuum thoroughly.

i’ll keep stains our little secret

laundry, carpet and upholstery s ta in remover

24 fl. oz.HHFSR | $11.95

Technical DataForm: LiquidColor: Clear, colorlesspH: 9 Specific Gravity: 1.011Chemical Family; Aqueous solution with

emulsions and acrylic copolymers% Actives by Weight: 55%

HMIS RatingNFPA Fire: 0Health: 1Reactivity: 0 Personal Protection: None required

Physical and Chemical CharacteristicsPhysical Hazards: None knownCarcinogenicity: None knownHealth Hazards: Direct contact with wet product may

cause slight eye or skin irritation

How it Works:

I’ll Restore Your Floor is an aqueous solution of emulsions, drying agents, and acrylic copolymers designed to restore the new look, shine and luster of your floor that have been lost due to time, traffic and wear. Its long lasting satiny polish will make your floors look like new while hiding small scratches and wear.

Helpful Tips:

1. Your floor must be clean and free of any old build up of previous cleaners and soil. Use the Healthy Home by Simplicity wood floor cleaner, Adore Your Floor, to prepare your floor for restoration. The Healthy Home foaming kitchen cleaner, You Cook, I’ll Clean, will remove sticky residue and heavy soiling not removed by regular cleaning. Make sure your floor is completely dry before using I’ll

Restore Your Floor.

2. Use the product to dampen a clean microfiber pad on your microfiber mop. Apply evenly in long, slightly overlapping strokes, working in the direction of your grain. Work in one 10’ by 10’ area at a time. Allow floor to dry for 20 minutes after the last area is done before allowing traffic on the floor. Extremely worn floors may require several applications. Do not apply more than 2 coats a day, and do not use frequently.

3. To maintain your newly restored floor, use Healthy Home Adore Your Floor wood floor cleaner and a microfiber mop.

i’ll restore your floorwood f loor pol ish

24 fl. oz.HHWFP | $11.95

Technical DataForm: LiquidColor: ClearSpecific Gravity: 1.002pH: NeutralChemical Family: Proprietary blend% Actives by Weight: 95%

HMIS RatingHealth: 1NFPA Fire: 0 Reactivity: 0 Personal Protection: B May irritate eyes

with direct exposure

Physical and Chemical CharacteristicsPhysical Hazards: None knownCarcinogenicity: None known

How it Works:

Stains Stink, I Fix Both is a unique proprietary blend of micro-encapsulating compounds, deodorants, and enzymes that break down any starch or protein-based stains on surfaces into micro droplets that are then surrounded by unique encapsulating compounds. Its non-detergent formula envelopes the broken down stains and odor-causing materials and dries into a fine inert micro particle that is easily eliminated by dusting, wiping or vacuuming. Works on both fabric or hard surfaces.

Helpful Tips:

1. Stains Stink, I Fix Both can be used as a fabric odor remover and general odor remover on any water safe surface. Simply spray the surface to slightly dampen, and allow to dry. It’s perfect for lockers, shoes, gym bags and other places that harbor odors.

2. In bathroom areas, spray the area around toilets, sinks and showers to eliminate odors. Be sure to spray the shower curtain.

3. Dampen a microfiber cloth with Stains Stink, I Fix Both and use as damp dust/wipe to leave areas clean and odor free.

4. When using Stains Stink, I Fix Both as a carpet stain remover, first remove as much of the excess liquid as possible. Set the sprayer to Stream, and surround the stain with a stream of product 6” to 8” away from the outer edge of the stain. This prevents the stain from wicking beneath the carpet to later return. Liberally apply Stains Stink, I Fix Both to the stain, and tamp with the edge of a spotting brush, allowing it to penetrate the stain for several minutes. Lightly brush the stain with a clean, white microfiber or terry cloth, but do not rub. Blot the stain to remove. After the area is dry, vacuum thoroughly to remove any remaining particles.

24 fl. oz.HHOSE | $16.95

stains st ink i f i x both

odor and sta in e l iminator wi th enzymes

Technical DataForm: Pressurized (aerosol) liquidColor: Transparent with citrus odorpH: 12Specific Gravity: 1.013Stability: One year minimumChemical Family: Pressurized aqueous solution

of surfactants

HMIS RatingNFPA Fire: 1Health: 0Reactivity: 0Personal Protection: None required

Physical and Chemical CharacteristicsPhysical Hazards: NoneCarcinogenicity: NoneHealth Hazard: May irritate skin and eyes

How it Works:

You Cook, I’ll Clean is a soap-free pressurized solution of high quality surfactants and detergents, containing no butyls, free-alkalai or ammonia. You Cook, I’ll Clean is an all-surface cleaner and degreaser that can be used on floors, painted walls, woodwork, marble, plastic, metal and other hard surfaces impervious to water.

Helpful Tips:

1. You Cook, I’ll Clean is specially formulated to perform the four functions of a superior detergent: wetting, penetration, soil suspension and emulsification. Simply apply a light spray to area to be cleaned, and allow it to work.

2. After a few moments, the soil rises to the surface, making it easy to wipe clean with a damp microfiber cloth. Turn the cloth several times. Extremely soiled surfaces may require more than one application.

3. For metal surfaces, finish cleaning by polishing with I Make Steel

Stainless to bring out the natural beauty of the metal and to protect from fingerprints and stains.

you cook, i’ll cleanfoaming k i tchen

degreaser

15 fl. oz.HHMC | $10.95

Technical DataForm: Moist powderColor: WhitepH: 7 – 9

HMIS RatingHealth: 1Flammability: 0Reactivity: 0Personal Protection: B

Physical and Chemical CharacteristicsPhysical Hazards: None known, essentially

non-toxic even with ingestion

How it Works:

Simplicity’s dry carpet cleaning powders are a non-toxic absorbent polymer with non-ionic surfactants and soil emulsifiers designed to clean and remove carpet stains through an absorbent process.

Helpful Tips:

1. Before starting, use a carpet grooming tool to completely detangle the fibers of your carpet and thoroughly dry vacuum your carpet with a CRI approved vacuum.

2. Pre-treat the entire area to be cleaned with I’m the Fountain of

Youth for Your Carpets. A light mist is all that is necessary; do not saturate your carpet. If using the Pet Formula, also treat the pet stains with For Spot’s Spots. After applying I’m the Fountain of Youth for Your Carpets, work it in with either the cleaning brush or groomer before applying the powder.

3. When applying the powder, take care not to apply too much. A dime-sized spot about a dime distance apart is plenty.

4. Brush the powder thoroughly and in opposite directions to get it worked in to every surface of the fiber.

5. Don’t rush to vacuum it up. Let the powder dry at least 30 minutes, longer if possible.

6. Vacuum thoroughly when dry with a fresh bag in your vacuum. The success of dry cleaning depends largely on how well your vacuum is functioning. Consider servicing your existing vacuum to like-new performance, or ask your Simplicity dealer for one of our great courtesy vacuums.

1 lb. with brushHHDC-1 | $19.95

HHDCP-1 | $27.95

4 lb. with sifterHHDC-4 | $32.95

HHDCP-4 | $43.95

take your carpet to the c leaners and hey pet people,

i ’m your carpet ’s best f r iend

Technical DataForm: LiquidColor: ClearpH: 7.0 –7.5Specific Gravity: 1.000% Actives by Weight: >=5%

HMIS RatingHealth: 1Flammability: 0Reactivity: 0Personal Protection B (eyes)

Physical and Chemical CharacteristicsPhysical Hazards: None knownOverview: No special precautions are

necessary beyond good hygiene

How it Works:

I’m the Fountain of Youth for Your Carpets is a water-based non-ionic surfactant formulated to relax the natural tension of carpet fibers. It allows Take Your Carpet to the Cleaners and Hey Pet People, I’m Your

Carpet’s Best Friend to be activated in order to absorb carpet dirt and stains. It is necessary for the success of dry powder cleaning to use this pre-treatment prior to using the dry powder.

Helpful Tips:

1. Prior to applying I’m the Fountain of Youth for Your Carpets, prepare your carpet pile by raking it with a carpet grooming tool. This task detangles the fiber of the carpet for better cleaning. Follow by thoroughly vacuuming the carpet.

2. Lightly spray the entire carpet surface and concentrate on highly soiled and high traffic areas. Spray approximately 2 feet from the carpet surface.

3. Lightly rake the carpet with your groomer and allow the pre-treatment to work for approximately 5 more minutes before proceeding with dry powder cleaning.

4. When using Hey Pet People, I’m Your Carpet’s Best Friend, pre-treat pet stains and odors with For Spot’s Spots (and Smells, Too) pet stain and odor remover. If unsure where these areas are, they can be located with a black light in a darkened room. Spot’s accidents will glow, making them easy to locate and treat.

i’m the fountain of youth for your carpets

for dry carpet c leaning

24 fl. oz.HHPT | $14.95

Technical DataForm: LiquidColor: Clear thin liquidpH: 7.5Specific Gravity: 1.011Chemical Family: Aqueous based detergent% Actives by Weight: 98

HMIS RatingNFPA Fire: 0Health: 2Reactivity: 0Protective Equipment: Prolonged exposure may

irritate eyes and skin

Physical and Chemical CharacteristicsPhysical Hazards: None knownPhysical Hazards: NoneCarcinogenicity: None known

How it Works:

I’m the Fountain of Youth for Your Carpets is a ready to use blend of water-based detergents and emulsifiers. It’s designed to suspend carpet soils not removed by dry vacuuming and prepare carpet fibers for wet carpet cleaning by releasing the surface tension. This is the most critical step in effective carpet cleaning and necessary to separate soil from fiber surfaces.

Helpful Tips:

1. Prior to applying I’m the Fountain of Youth for Your Carpets, prepare your carpet pile by raking with a grooming tool to detangle the carpet fibers. Follow by thoroughly vacuuming the carpet.

2. Lightly spray the entire carpet surface, concentrating on highly soiled and high-traffic areas. Keep the spray approximately two feet from the carpet surface.

3. Lightly rake the carpet with your groomer and allow it to work for approximately 5 minutes before cleaning your carpet with a carpet extractor.

24 fl. oz.HHPT-F | $14.95

i’m the fountain of youth for your carpets

for use wi th carpet ext ractors