adt intrusion alarm catalogue

Intruder AlarmsUK Product Catalogue

A Tyco International Company

New_Intruder_Covers 3:Layout 1 23/08/2010 13:17 Page 1

Intruder CatalogueIntruder CatalogueIntruder Catalogue i

Introduction

03/12

The Tyco EMEA Web site contains an endless supply of product relatedinformation available in multiple languages - English, Dutch, French,German, Italian, Polish and Spanish. It is regularly updated and featuresmany aids to the selling process including presentation material anddetailed technical information.

To enhance customer specifications and quotations we also provide aseries of product datasheets which can give our clients an opportunity toread more about the product.

We are positive that together we can help grow your business and welook forward to working with you in the future.

Welcome to the 14th Issue of Tyco EMEAs Intruder Product Catalogue containing the wide range of products availablefrom our distribution centre in Letchworth. We aim to make your product range as comprehensive as possible to ensureyou never need go anywhere else. To meet this goal, our product specialists, with your help, have selected the mostappropriate, cost effective product range available on the market.

In line with our ISO 9000 accreditation, only those products that meet the highest quality criteria have been included.

Our goal is to despatch product on the same day as we receive your order. Our warranty and service returns policy issecond to none. We recognise that your business is highly dependent on excellence in customer service and to helpachieve this we offer extended warranty from many of our suppliers. Full credit is also available on a No Question NoFuss basis for any new in-warranty product returned to the distribution centre. Our standard duration for warranty is aminimum of 12 months credit.

For Technical Pre-sales Inquiries:[email protected]

For Technical Training Enquiries: [email protected] http://www.tycoemea.com/English/Training.asp

For SSA/dongle Requests:http://www.tycoemea.com/Dongle/index.htm

CONTACT INFORMATION

TYCO International EMEAVoltaweg 20 6101 XK Echt - The NetherlandsFax: +31 475 352 725

For Technical Services:Hours: 8:00 to 18:00 EET, CET, GMT: (Toll Free): +800CALLTYCO OR +800 2255 8926UK: 08081 013 73 OR 08701 238 787

TECHNICAL SUPPORT & PRE-SALES CALL CENTRE

For Technical Post-Sales Enquiries:[email protected] www.tycoemea.com www.calltyco.com Hours: 8:00 to 18:00 EET, CET, GMT: (Toll Free): +800CALLTYCO OR +800 2255 8926 UK: 08081 01373 OR 08701 238787

IntroContentpgsIntrudrCat:Layout 1 20/03/2012 11:43 Page 1

Contents

Intruder Catalogue ii 03/12

Introduction i

Contents ii

Introduction of Intruder Alarm to European Standards iii

Chapter 1 - Accessories 1.1

Chapter 2 - Audio Verification 2.1

Chapter 3 - Batteries 3.1

Chapter 4 - Contacts (Magnetic) 4.1

Chapter 5 - Day Alarms 5.1

Chapter 6 - Detectors - Beam 6.1

Chapter 7 - Detectors - Glassbreak 7.1

Chapter 8 - Detectors - Sequential Confirmation 8.1

Chapter 9 - Detectors - Dualtech 9.1

Chapter 10 - Detectors - Passive Infra-Red 10.1

Chapter 11 - Detectors - Vibration 11.1

Chapter 12 - Detectors - Temperature 12.1

Chapter 13 - External Lighting Control 13.1

Chapter 14 - Life Safety Devices 14.1

Chapter 15 - Intruder Alarm Control Panels - Galaxy 15.1

Chapter 16 - Intruder Alarm Control Panels - Domonial 16.1

Chapter 17 - Le Sucre 17.1

Chapter 18 - Perimeter Protection 18.1

Chapter 19 - Power Supply Units 19.1

Chapter 19 - Radio Equipment - Cooper Security 201

Chapter 21 - Radio Equipment - EMS 21.1

Chapter 22 - Signalling 22.1

Chapter 23 - Sounders 23.1

Chapter 24 - Cable 24.1

CONTENTS

IntroContentpgsIntrudrCat:Layout 1 20/03/2012 11:43 Page 2

Intruder Catalogue Chapter 1 Page 1

Chapter 1 - Accessories

03/12

Exit TerminatorsExit terminate buttons are used to provide a final set input toalarm systems. Generally sited outside the premises,operation of the exit terminate button is the final actionrequired in the setting process.

This facility is mandatory in some police authority areas.

Features Easy Fit Unobtrusive Design Sleek Design

Product Codes1147 Surface mount exit terminate button,

Smith type1148 Surface mount box for use with 1147 exit

terminate button1155 Exit terminator switch, magnetic operation

type. White. Requires ferrous object to beheld against it to operate.

1175 ADT key ring for use with magneticoperation type exit terminator+

609.002.024 Elmdene set switch with white clip onbezel

DRB002NF ICS S/S Intruder set switch

1155

1148

1147

1175

Accessories

609.002.024

DRB002NF

Intruder_Ch1_Accesories:Layout 1 20/03/2012 09:33 Page 1


Features

Intruder Catalogue Chapter 1 Page 2 03/12

ELM-PA-G3-B Grade 3 Panic Button - BrassELM-PA-G3-SS Grade 3 Panic Button - Brushed Stainless

SteelELM-PA-G3-W Grade 3 Panic Button - WhiteELM-PA-KEY Pack of 5 spare keys for Panic Buttons1146 Geutebruck suspicion button1183 Replacement key for Knight Plastics PA

button1184 Replacement key for Maximal PA buttons

New Elmdene PABsA new range of static panic alarm buttons from ElmdeneInternational that conform to Grade 3 of EN50131-1. Thenew range has the benefit of having separate tamper andalarm contacts, which are necessary for reporting for Grade3 systems, the tamper being a spring micro switch and thealarm contacts being a magnetic/reed switch.

All units are Grade 3 Double Push with integral resistors foruse with most control panels or option for Double Pole.Spare terminals allow through connection for multiple unitswired to one zone.

Special features include integral storage of reset key andanti-lock reset mechanism to ensure unit still operates ifreset key is left in the unit and silent operation.Elmdene Panic Buttons fully comply with 'The ACPO 10Point Plan' and all requirements under EN50131-1:2006 andPD6662:2004 A1 + A2.

The panic buttons can be wired in fully supervised formatsor traditional without any resistors (no jumpers fitted) In addition they have clamp down terminals and haveselective resistor value jumpers that can be used for thefollowing panels;

4k7/2k2 ADE, Bosch, Castle, Menvier, Pyronix,Scantronic, Texecom

1k/1k Galaxy 8k2/8k2 Guardall 4k7/4k7 Aritech 6k8/4k7 GardTec 2k2/2k2 Europlex 5k6/5k6 DSC Double Pole (no resistors)

Technical Specification

Silent Operation FSL and D/P Connection Multiple Control Panel / Resistor Options Easy Connection of Multiple Units Anti-lock Reset Mechanism Independent Micro Switch Tamper (removal of cover

initiates tamper signal only) Integral Storage for Rest Key Selectable Normally Closed or Open Contacts

Product Codes

Product Dimensions Operating Action Magnet Colour Finish IndicationCode HxWxD mm Temp.ELM-PA-G3-SS 81 x 63.5 x 29 -40

oC to +50

oC Silent action, latching (key release) Ferrite Stainless Steel Stainless Steel Flag Indication

ELM-PA-G3-B 81 x 63.5 x 29 -40oC to +50

oC Silent action, latching (key release) Ferrite Brass Brass Flag Indication

ELM-PA-G3-W 81 x 63.5 x 29 -40oC to +50

oC Silent action, latching (key release) Ferrite White Plastic Flag Indication



Intruder Catalogue Chapter 1 Page 303/12

EN3-JB9-HD-GROMMET Pack of 10 white end Grommets for HDJBs

EN3-JB9-HD-BN-GROMMET Pack of 10 brown end Grommets for HDJBs

Door LoopsThese are used for looping from door frame to a door. For use with contacted locks, wired and covered doors etc.

Features Compact Various Sizes Choice of colour

EDL1 30cm fixed length door loop whiteEDL2 25cm white door loop extendable

up to 170cmEDL3 50cm white door loop extendable

up to 330cmEDL1-BN 30cm fixed length door loop BrownEDL2-BN 25cm Brown door loop extendable

up to 170cmEDL3-BN 50cm Brown door loop extendable

up to 330cmEDL1-KIT 30cm fixed length door loop white

Inc 2 EN3-JB9-HD-W & 2 GrommetsEDL2-KIT 25cm white door loop extendable up

to 170cm Inc 2 EN3-JB9-HD-W & 2Grommets

EDL3-KIT 50cm white door loop extendable up to 330cm Inc 2 EN3-JB9-HD-W & 2Grommets

EDL1-BN-KIT 30cm fixed length door loop Brown Inc 2 EN3-JB9-HD-W & 2 Grommets

EDL2-BN-KIT 25cm Brown door loop extendable up to 170cm Inc 2 EN3-JB9-HD-W & 2Grommets

EDL3-BN-KIT 50cm Brown door loop extendable up to 330cm Inc 2 EN3-JB9-HD-W & 2Grommets

Product Codes




Junction BoxesDesigned for use in security applications, these junctionboxes are provided with a tamper connection which willopen circuit whenever the lid is removed.

Features Real tamper switch with spring operation Clamp style terminals Choice of models Modern design EN Grade 3 compliant

Product CodesEN3-JB10 Elmdene 10 way Grade 3 White JB with

Tamper - 8 way plus 2 terminals forTamper

EN3-JB10-BN Elmdene 10 way Grade 3 brown JB withtamper - 8 way plus 2 terminals forTamper

EN3-JB9-HD Elmdene 9 way HD Grade 3 white JB withTamper and Sealing Gasket - 7 way plus 2terminals for tamper with environmentalclass 3 sealing gasket

EN3-JB9-HD-BN Elmdene 9 way grade 3 brown JB withtamper with sealing gasket. 7way plus 2terminals for tamper with environmentclass 3 sealing gasket

EN3-JB26 Elmdene 24 way Grade 3 white JB withTamper - 24 way plus 2 terminals forTamper




Accessories

ACT1313 12Vd.c. Spike SupressorInduced AC (ElectromagneticInterference) is caused when Intrudercables come near mains or telephonewires. High induced AC voltagecauses random and intermittent falsealarms as well as systemmalfunctions.

Very often, mains and other highvoltage cables are run next to alarmcircuits after the system has beeninstalled. Eliminating induced AC issimple by fitting a Spike Suppressoras standard in every control panel orPSU.

The suppressor connects directlyacross the DC supply and to mainsearth, dumping induced AC noiseand clamping the DC voltage againstspikes.

Product Code3127 ACT1313 12Vdc

Spike Supressor

Mains Filtering

Focus Mains FilterThis unit combines both transientprotection and filter protection. Theunit is designed to be hard-wired intothe mains terminal block acrossneutral and earth. To obtain the bestperformance from the device, theleads should be kept as short as

possible. Note the device requiresexternal fusing which should be nomore than 13 Amps maximum, so itmust be connected downline of theunits fusing the system. The powermust be switched off duringconnection.

Product CodeF-2323MSF Focus Mains Filter

Relays

ACT 2468 Radio frequency filter. The ACT 2468 is a powerful 1 Amprated RFI filter specifically designedfor use on any DC troublesome alarmcircuit cable. They are particularlybeneficial where data corruptionoccurs to keypads and LIMs(especially on take-overs). They canbe used to attenuate RFI interferenceto alarm detectors and sounders. TheACT 2468 will work on 12V and

24Vd.c., normally closed, end of line,ID and Fire Alarm circuits. They canalso be used to attenuate RFI on DCAccess Control circuits. The filteroffers virtually no resistance to DCcircuits, but will substantiallyattenuate RFI signals between2.5MHz -800MHz making themquicker and more cost effective thanrewiring in screened cable.

Technical SpecificationDimensions: 41.5H x 11W x 4D

mm

Product Code3141 ACT 2468 Radio

Frequency Filter

24V Slave Relay double polechangeover relay.

Product Code609.001.015

Hoyles S312N double pole interfacerelay. This device accepts a variety ofinput conditions (Voltage, Logic,Closed Circuit and Open Circuit) forinterfacing various signals via voltagefree DPCO contacts.

With a self adhesive backing for easymounting. Four mounting holes arealso provided for more permanent fixing.

Product Code6504

Hoyles S312T double pole interfacerelay. This device accepts a variety ofinput conditions (Voltage, Logic,Closed Circuit and Open Circuit) forinterfacing various signals via voltageDPCO contacts.

The S312T is similar to the S312N butits action can be delayed by up toabout 30 seconds. This can beadjusted with the on boardpotentiometer. This can be a usefulfeature where it is necessary to delayone action slightly to allow another.

It is supplied with a self adhesivebacking for easy mounting. Fourmounting holes are also provided formore permanent fixing.


Hoyles S320 interface relay . Thisdevice accepts a variety of inputconditions for interfacing varioussignals (Voltage, Logic, Closed Circuitand Open Circuit). Output via voltagefree SPCO contacts.

With a self adhesive back for easymounting.

Product Code6698




12V Slave Relay double polechangeover relay. Product Code

609.001.014

Elmdene Multipurpose Relay.MPR001 MULTI-PURPOSE RELAYSupply 12-13.8VdcCurrent 20mATrigger Input 1.5mASwitch Load Maximum 1A@ 24V dcor 0.5A @ 125V ac

Dimensions 72Lx26Wx20D Product Code609.001.215

Contacted Locks

A diecast metal box measuring 90H x 38W x 30D mm containing akeyswitch and anti-tamper switch.Brown. Boxed Outside Shunt D.C.

Product Code4015 Lock

Document Box

Plastic folder for the inside of controlpanel lids. For fitting adjacent tocontrol panels to keep systeminformation secure.

Product Codes9313 Document Box

(Keyed Alike)9314 Key For Document

Box

Window Stickers

Window Sticker Reads "Secured byADT Fire and Security 24 Hour AlarmMonitoring" (174mm x 60mm)

Surface Sticker Reads "Secured byADT Fire and Security 24 Hour AlarmMonitoring" (174mm x 60mm)

Product Codes604.002.183 Window Sticker604.002.186 Surface Sticker

Strobes

These high quality range of XenonBeacons are tested to IP65 makingthem ideal for most stringentapplications.

Each beacon incorporates a lowprofile Frestral lens designed to givemaximum light output.

Features. Protected to IP65. Attractive Low Profile

Technical SpecificationDesignDimensions: 75 Dia x 51Hmm

Product Codes7174 Clear strobe 12V

1W7464 Blue strobe 12V

1W7609 Amber strobe 12V

1W

Chubb 3G11O D/C. Is a BS3621 5Detainer Mortice lock complete with73mm backset, SPDS single polechangeover switch, DPDS Doublepole changeover switch.

Product Codes4001-ICS Chubb 3G110

D/C lock4049-ICS Chubb 3G114

D/C lock

Relays




The Minitran 452 is a new low costTelephone Test Set designed toenable alarm technicians to test linesand verify signals sent to the AlarmReceiving Centre duringcommissioning and maintenanceinspections. The tester has Talk andMonitor modes to enable lines to betested without disrupting signals. Thetester also incudes DSP (DigitalService Protection) which enablessafe operation where telephone wiringmay carry digital signals, hazardousvoltages or fault conditions. A POLtest button with Green/Red LEDsindicates correct or reverse A/Bpolarity connection.

The tester comes complete with easyto use operating instructions and linecable with Red/Black Crock-Clipconnectors.

Features DSP Digital Services Protection Safe with Data Lines Rugged Drop Proof Design Protected against 230 VAC Flat Battery - always ready feature Over Current Protection Battery Saving Auto Power-off Lightning Surge Protection Three Position Volume Boost Finger Tip Microphone Mute Headset Socket for Hands Free 32 Digit Last Number Redial Acoustic Shock Protection

Product CodeM0452-00 Minitran 452 test

TelephoneHandset

Minitran 452 Test Telephone Handset

Service ToolsService & installations engineer products, each designed to enable engineers to provide a trouble free alarm installationservice.*

GOLD-PLUS is an Intelligent BatteryCapacity Tester designed to test6/12V lead acid batteries from 1.2Ahto 100Ah. Its pulse load technologysimulates a 20 hour battery dischargetest in just 20 seconds, displaying theAmpere-hour (Ah) capacity availablein the battery.

Displays the Ah capacity availablein 6/12Volt lead acid batteries inseconds

Tests 6Volt SLA batteries from1.2Ah to 12Ah and 12Volt from1.2Ah to 100Ah

Tests SLA batteries straight fromthe box, partially or fully charged

Can be calibrated to test StandbySLA and Cyclic GEL batteries.

Table indicates when batteriesshould be recharged or replaced

Quick, accurate and easy to use

Product CodeGOLD-PLUS ACT Gold-plus

Battery SLA Tester

GOLDPLUS Battery SLA Tester

The NEW AVO300 from ACT Metersprovides a high resolution 4000 countdigital display and offers a range of measurement modes for AC and DCapplications, resistance and currentmeasurement. The AVO300 also hasthe added benefit of a separate battery and fuse compartment, meaning both battery and fuses canbe replaced without opening the main

instrument body and breaking/invalidating the calibration seal

Fully auto-ranging 4000 countdigital display

Separate fuse and batterycompartment, allows both to bereplaced without breaking thecalibration seals

Tough rubber-armoured case

Product CodeACT-AVO300 ACT Autoranging

Digital Meter

ACT-AVO300 ACT Autoranging Digital Meter




This page is left intentionally blank.



Chapter 2 - Audio Verification

03/12

CSL Audio Verification UnitThe CS5000 Is a compact AVU designed to provideconfirmation of an unauthorised intruder presence. Thesystem comprises a small, low current control unit housed inthe same enclosure as the alarm panel. It has two independent microphone inputs with an auto-learn featurethat enables it to be easily connected to the majority ofcontrol panels.

The unit also has clean changeover relay contacts to silencethe internal alarm siren whether recording or transmittingunauthorised sounds. Microphones are housed in a smallplastic case that can be surface or corner mounted andeach has a two-wire connection designed to operate overlong lengths of standard alarm cable without suffering frominterference.

Features The audio verification unit is small enough to be fitted

inside most panel housings Up to 512 microphones can be fitted using full allowance

of expansion boards and hubs Each microphone has an automatic gain compensation to

counter noise swamping offering High intelligibility audio Microphone modules will operate on 1Km loop lengths of

ordinary alarm cable Microphone tamper contacts for anti tamper monitoring Individual microphone module audio level and recording

indicators Four 10 second pre-recorded messages can be played

back for user prompting (with expander) Relay output for controlling internal sirens and

programmable outputs

CSL CS5000-00 Audio VerificationInterface (PCB Only)


CSL CS5010-00 Audio VerificationMicrophone (up to 8 per standardsystem)


CSL CS5020-00 Expansion Board forCSL Audio Interface (608.009.192) toallow connection of further 24Microphones over 6 additionalbusses-32 total.

Also includes Voice annunciation features for the reduction of UserFalse Alarms


CS5030 AVU LIM/Hub ExpansionBoard


LIM/Hub Expansion Board

Audio VerificationCSL Audio Verification Interface

CSL Audio Verification Microphone

CSL Expansion Board

Audio VerificationThe basis of Audio Confirmation is to enable an Alarm Receiving Centre operator to listen in to a premises that hassignalled an alarm activation and allow the ARC operator to confirm if the alarm activation is genuine.

Confirmation of intruder alarm activations is now a requirement under the ACPO 2000 Security Systems Policy. This can bedone through sequential, audio or visual confirmation.

Intruder_Ch2_AudioVerif:Layout 1 20/03/2012 09:36 Page 1

Chapter 2 - Audio Verification



Intruder_Ch2_AudioVerif:Layout 1 20/03/2012 09:36 Page 2


Chapter 3 - Batteries

Batteries

03/12

Product Codes

Product Code Voltage Autonomy Dimensions Weight (kg)CS0388 12V 0.6Ah 110 x 90 x 28mm 0.18PS-1212 12V 1.2Ah 97 x 42 x 54mm 0.55PS-1221 12V 2.1Ah 178 x 34 x 66mm 1.0PS-1230 12V 3.0Ah 134 x 67 x 66mm 1.2PS-1242 12V 4.2Ah 90 x 70 x 101mm 1.7PS-1270 12V 7.2Ah 151 x 65 x 98mm 2.6PS-12120 12V 12.0Ah 151 x 98 x 100mm 4.1PS-12170 12V 17.0Ah 181 x 76 x 167mm 6.1PS-12260 12V 26.0Ah 167 x 175 x 125mm 9.4PS-122380 12V 38.0Ah 197 x 165 x 170mm 13.8PS-12650 12V 65.0Ah 348 x 167 x 178mm 24.0PS-6100 6V 10.0Ah 151 x 51 x 98mm 2.1

Product Code Battery660.002.028 Alkaline 6V Battery (GP1412AP)TY-4103-F2 Varta Alkaline (1.5V/1350mAh) Battery: Size AAATY-4106-F2 Varta Alkaline (1.5V/3200mAh) Battery: Size AATY-4122-F1 Varta Alkaline (9V/600mAh) Battery: Size ETY-6205-BL1 Flint CR123A lithium battery 2/3 A,TY-GP910A-BL2 Gold Peak Alkaline (1.5V/0mAh) Battery; Size NTY-CR2025-BL5 Gold Peak LI-MNO2 CR2025 3VTY-CR2032-BL5 Gold Peak LI-MNO2 CR2032 3VAP-1 IBP Battery bundle for smokeAP6MTHS IPB old dye pack batteriesB-02-8001 ETS replacement batteryL91 L91 Lithium AA 1.5v BatteryCS0388 CSL Dualcom replacement battDOM-BAT-CRI HON DOM ADT 4VOLT 3.5AHR battLED-BATTERY-PACK ELM battery for LED moduleQ3-BATT-SET IBP Q3 BatteryQ3MAINTKIT IBP Q3 Battery Set7K67J Duracell 7K67J for EMS PACR2450 3v Coin Cell BatteryLSH20 3.6v 13Ah Saft Battery (for Optex RF Beams)

We supply a wide range of rechargable lead acid batteries to meet the needs of giving extra autonomy to your security system.

Intruder_Ch3_Batteries:Layout 1 20/03/2012 09:43 Page 1

Chapter 3 - Batteries



Intruder_Ch3_Batteries:Layout 1 20/03/2012 09:43 Page 2


Chapter 4 - Contacts

03/12

Contacts (Magnetic) Contacts offer a simple means of protecting doors, windows and roller shutters. The principle of operation is that oneelement, (usually fixed to the non-moving section), contains a small switch encapsulated in a glass bottle, (called amagnetic reed), and the other elements contain a magnet.

When the magnet is held within the operating gap of the magnetic reed, the switch is held closed and the circuit made. If themagnet is moved outside the operating gap parameters, the circuit opens and an alarm is generated. Tyco Safety Productsstock a wide variety of contact to suit most applications.

EN50131 -2-6 Opening Contacts (Magnetic) Changes are necessary due to the new EN standardsimplementation of, Draft prEN 50131-2-6 Alarm systems -Intrusion and hold-up systems Part 2-6: Opening contacts(magnetic) that came into force back in April 2007, but thiswas not adhered too due to their being a lack of differenttypes available and their reliability.

Major Change to grade 34.5.4 Magnetic field interferenceWhen the detector is mounted in accordance with themanufacturer's instructions and is subject to the presence ofan external magnetic field generated by the interference ofan external magnet and applied to the faces of the detector,the detector shall either:

A) Be immune to any influence by the interference of themagnet and continue to operate normally.

B) Generate an intrusion, and/or tamper, and/or fault, and/orother independent signal or message in accordance withthe standard when the make or break distances exceedtwice those specified.

EN3-QFC-GN

White 20mm Plastic Flush, CabledContact for use on Wood orAluminium. Integral Resistors, for usein FSL or DP systems, single or multiple doors. Incorporating magnetic detection/immunity.

Product CodeEN3-QFC-GNWhite 20mm Plastic Flush, CabledContact for use on Wood orAluminium.

EN3-QFC-BN-GN

Brown 20mm Plastic Flush, CabledContact for use on Wood orAluminium. Integral Resistors, for usein FSL or DP systems, single or multiple doors. Incorporating magnetic detection/immunity.

Product CodeEN3-QFC-BN-GNBrown 20mm Plastic Flush, CabledContact for use on Wood orAluminium.

Flush Contacts - Grade 3

Surface Contacts - Grade 3

EN3-QSC-GN

Small white Surface Plastic, Contactfor use on Wood or Aluminium.Integral Resistors, for use in FSL orDP systems, single or multiple doors.Incorporating magneticdetection/immunity.

Product CodeEN3-QSC-GNSmall white Surface Plastic, Contactfor use on Wood or Aluminium.

EN3-QSC-BN-GN

Small Brown Surface Plastic, Contactfor use on Wood or Aluminium.Integral Resistors, for use in FSL orDP systems, single or multiple doors.Incorporating magneticdetection/immunity.

Product CodeEN3-QSC-BN-GNSmall Brown Surface Plastic, Contactfor use on Wood or Aluminium

Intruder_Ch4_Contacts:Layout 1 20/03/2012 09:47 Page 1



EN3-LSC-GN

Large white Surface Plastic, CabledContact for use on Wood orAluminium. Integral Resistors, for usein FSL or DP systems, single or multiple doors. Incorporating magnetic detection/immunity.

Product CodeEN3-LSC-GNLarge white Surface Plastic,Cabled Contact for use onWood or Aluminium.

EN3-LSC-BN-GN

Large brown Surface Plastic, CabledContact for use on Wood orAluminium. Integral Resistors, for usein FSL or DP systems, single or multiple doors. Incorporating magnetic detection/immunity.

Product CodeEN3-LSC-BN-GNLarge brown Surface Plastic,Cabled Contact for use onWood or Aluminium.

Surface Contacts - Grade 3 contd

EN3-RSA-GN

Roller Shutter Contact, IntegralResistors, for use in FSL or DP systems, single or multiple doors.Incorporating magneticdetection/immunity.

Product CodeEN3-RSA-GNRoller Shutter Contact

Heavy Duty service AliminiumContact with 8 Terminals and 1KResistor.

Product CodeYM101KR

YM101KR

Large white surface contact with 6Term and selectable EOLresistor values and tampers

Product CodeSC570-WH-MD-MULTI-G3

SC570-WH-MD-MULTI-G3




LSC-SPC-BN

4HD-SPC 4SM-SPC

S-SPC

QSC-SPCQSC-SPC-BN

LSC-SPC

SpacersThese spacers will help in aligning up the magnet to reedcontact on doors that are off set or need a small amount oflevelling up. The spacers can be used on both the magnetand or the door contact.

There are 5 different types to suit most of the surface rangeand in Aluminium, brown and white versions.

Features White, brown and Aluminium versions 3mm and 2.5mm sizes Can be used on contact or magnet

Product CodesS-SPC 3.0MM Spacer for use with S type

Contacts, 6S-GN4HD-SPC 3.0MM Spacer for use with HD type

Contacts, 6HDSO-GN4SM-SPC 3.0MM Spacer for use with SM type

Contacts, 6SM-GNLSC-SPC Pack of 5, 2.5MM Spacers for LST-GN

& EN3-LSC-GN ContactsLSC-SPC-BN Pack of 5, 2.5MM Brown Spacers for

EN3-LSC-BN-GN ContactQSC-SPC Pack of 5, 2.5MM Spacers for QSC-GN

& EN3-QSC-GN ContactsQSC-SPC-BN Pack of 5, 2.5MM Brown Spacers for

EN3-QSC-BN-GN Contact




Grade 3 SpecificationsFlush Surface

Grade 3 3 3 3Model EN3-QFC-GN EN3-QSC-GN EN3-LSC-GN EN3-RSA-GN

EN3-QFC-BN-GN EN3-QSC-BN-GN EN3-LSC-BN-GNApplicationCabled/Terminals Cabled Cabled Cabled CabledSuitable for Wood or Metal Wood or Metal Wood or Metal Wood or Metal Wood or MetalFixing Screws Screws Screws ScrewsOperation Mode FSL of DP FSL of DP FSL of DP FSL of DPSingle/Multiple Doors Single or Multiple Single or Multiple Single or Multiple Single or MultipleSpecial Features Magnetic Magnetic Magnetic Magnetic

Immunity Immunity Immunity Immunity & DetectionMaterial ABS ABS ABS AluminiumColour White or White or White or Silver

Brown Brown BrownContact DetailsMagnetic Detection/Immunity Immunity Immunity Immunity DetectionOperating Gap-Minimum Close (mm) 13 9 7 22Resistors Fitted Yes Yes Yes YesNumber of Wires or Terminals 6W 6W 6W 6WS/Steel Cable protection No No 50cmEncapsulation Potted Potted Potted PottedContact Dimensions & FixingsLength (mm) N/A 70 93 150Width (mm) N/A 17 25 40Depth (mm) 15 15 25 14Flange (mm) 36 x 22.5 N/A N/A N/ABody Diameter (mm) 20 N/A N/A N/ACable Length (mm) 100 100 100 100Fixings Screws Screws Screws ScrewsMagnetic DetailsLength (mm) N/A 70 93 73Width (mm) N/A 17 25 60Depth (mm) 25 15 25 40Flange (mm) 36 x 22.5 N/A N/A N/ABody Diameter (mm) 20 N/A N/A N/AFixings Screws Screws Screws ScrewsClassificationTS50131-2-6 Grade 3 3 3 3Environmental Class III III III IIIProtection IP67 IP67 IP67 IP67




Medium surface contact designed towork on large wooden or metaldoors.

Product Code6SL-GN

Medium surface contact designed towork on large wooden or metaldoors, 2 m of cable provided.

Product Code6SL-200-GN

Small metal surface fitting unitdesigned to work on wooden or metaldoors.

Product Code6SM-GN

Small surface fitting unit designed towork on wooden or metal doors.

Product Code6S-GN

Large size surface fitting unit withterminals, designed to work onwooden or metal doors.

Product CodeLST-GN

6SL-GN

Medium surface contact designed towork on large wooden or metaldoors. Available in brown only.

Product Code6SL-200-BN-GN


Product Code6SL-BN-GN

6SL-BN-GN

Surface Contacts - Grade 2

6S-GN

6SM-GN

LST-GN

6SL-200-GN

6SL-200-BN-GN




Large surface contact designed towork on large or metal doors.

Product Code6PHD-GN

Large surface contact designed towork on large or metal doors, hasbuilt in standoff.

Product Code6HDSO-GN

6HDSO-GN

Heavy duty unit aluminium with 8terminals.

Product CodeVHDA-GN

VHDA-GN

6PHD-GN

QST-GN

Medium surface contact designed towork on large wooden or metaldoors.

Product CodeQST-GN


Product CodeQST-BN-GN

QST-BN-GN

Large surface contact designed towork on large wooden or metaldoors.

Product Code6HD-GN-SS

6HD-GN-SS

Large Roller shutter contact designedto work on large wooden or metalroller shutter doors.

Note: Non-handed. Direct replacement for old part number 1019.

Product Code6RSA-100-GN

Small roller shutter contact designedto work on large wooden or metaldoors.

Note: Non-handed Product Code6RSL-100-GN

6RSL-100-GN

6RSA-100-GN




A small white flush fitting unitdesigned to work on wooden doors,6 terminals with tamper cover.

Product CodeQFT-GN

A Pencil type flush fitting unitdesigned to work on wooden doors.

Product Code6F-GN

A small flush fitting unit designed towork on wooden doors.

Product Code6QFC-GN

A small flush fitting unit designed towork on wooden doors. Available inbrown only.

Product Code6QFC-BN-GN

Flush Contacts - Grade 2

Large flush fitting unit designed towork on wooden or metal doors.

Product Code6MDP-GN

6F-GN

6QFC-GN

6QFC-BN-GN

QFT-GN

6MDP-GN

A small brown flush fitting unitdesigned to work on wooden doors,6 terminals with tamper cover.

Product CodeQFT-BN-GN

QFT-BN-GN




High Security flush fitting contact withcable, designed to work on woodenor metal doors.

Product Code6VS105-GN

Large Roller shutter contact designedto work on large wooden or metalroller shutter doors.

Note: This is a handed model and must not beconfused with the basic model 6RSA-100-GN.The contact would be fitted to the LEFT side ofa roller shutter door when stood inside thebuilding looking towards the outside.

For the version to fit to the RIGHT side of aroller shutter door when stood inside thebuilding looking towards the outside, part codewould be 6VS222-GN-REV available as an NSLfrom Elmdene.


Large surface contact designed towork on large wooden or metaldoors.


High Security flush fitting contact withcable, designed to work on woodenor metal doors.

Product Code6FMBR-GN

Large surface contact designed towork on large wooden or metaldoors, has built in standoff.

Product Code6HDBR-SO-GN

* NOTE: Please see the following pages of charts for more detailed information regarding the above contacts.

6FMBR-GN

6VS105-GN

6HDBR-SO-GN

High Security - Grade 2

6VS222-GN

6VS302-GN




Grade 2 2 2 2 2 2Model 6S-GN 6SM-GN LST-GN 6SL-200-GN 6SL -GN QST-GN

6SL-200-BN-GN 6SL-BN-GN QST-BN-GNApplication Small surface fitting Small metal surface Medium size fitting Medium surface Medium surface Medium surface contact

unit designed to fitting unit designed unit with terminals contact designed contact designed designed to workwork on wooden to work on wooden designed to work to work on large to work on large on large woodenor metal doors or metal doors on wooden or wooden or wooden or or metal doors

metal doors metal doors metal doorsMaterial ABS Anodised ABS ABS ABS ABSColours White Silver White White or Brown White or Brown White or BrownContact Length 38mm 38mm 86mm 65mm 65mm 67mmWidth 14mm 16mm 25mm 12mm 12mm 14mmDepth 8.5mm 9.5mm 20mm 12mm 12mm 13mmMagnet Length 38mm 38mm 86mm 65mm 65mm 67mmWidth 14mm 16mm 25mm 12mm 12mm 14mmDepth 8.5mm 9.5mm 20mm 12mm 12mm 13mmReed Type Standard Standard Standard Standard Standard StandardNo. of Reeds 1 1 1 1 1 1Operating Gap-max 25mm 15mm 40mm 15mm 15mm 20mmEncapsulation Potted Potted 6 Terminals Potted Potted TerminalsProtection IP67 IP67 N/A IP67 IP67 IP43Amount of Cable wires 6 6 0 6 6 TerminalsCable Length 1m 1m 6 Terminals 2m 1m N/ACable Protection S/Steel No No N/A No No No2 x 1K/1K for EOLEN50131/ EOL EOL EOL EOL EOL EOLPD6662 grade 2 2 2 2 2 2

Grade 2 2 2 2 2Model 6PHD-GN 6HDSO-GN VHDA-GN 6RSL-100-GN 6RSA-GNApplication Large surface contact to Small metal surface Heavy duty Ali Small Roller Shutter Large Roller Shutter

to work on large wooden fitting unit designed with 8 Terminal contact designed to contact designedor metal doors to work on wooden work on large to work on large

or metal doors, has wooden or metal doors wooden or metal doorsbuilt in standoff

Material ABS Anodised ABS ABS ABSColours White Silver Silver Silver SilverContact Length 80mm 80mm 170mm 94mm 175mmWidth 20mm 32mm 25mm 40mm 52mmDepth 12mm 45mm 25mm 15mm 15mmMagnet Length 80mm 80mm 170mm 50mm 85mmWidth 20mm 32mm 25mm 55mm 70mmDepth 12mm 45mm 25mm 35mm 35mmReed Type Standard Standard Standard Standard StandardNo. of Reeds 1 1 1 1 1Operating Gap-max 15mm 25mm 50mm 70mm 70mmEncapsulation Potted Potted terminals Potted PottedProtection IP67 IP67 N/A IP67 IP67Amount of Cable wires 6 6 0 6 6Cable Length 1m 1m 8 Terminals 1m 1mCable Protection S/Steel No Option Yes 50cm 50cm2 x 1K/1K for EOLEN50131/ EOL EOL EOL EOL EOLPD6662 grade 2 2 2 2 2




Grade 2 2 2 2Model 6F-GN 6QFC--GN QFT-GN 6MDP-GN

6QFC-BN-GN QFT-BN-GNApplication A Pencil type flush A small flush fitting A small flush fitting unit Large flush fitting unit

fitting unit designed unit designed to designed to work on designed to work onto work on wooden work on wooden or wooden doors 6 terminals wooden or metal doors or metal doors metal doors with tamper cover

Material ABS ABS ABS ABS

Colours White White or Brown White or Brown White Contact Length 34mm 15mm 15mm 34mm

Diameter Flange 8mm 36mm x 22.5mm 36mm x 22.5mm 38mm (Oval)Diameter standoffFlange N/A 0mm 0mm 24mm

Diameter Body 8mm 20mm 20mm 12mm

Fixings Push In 2 Screws 2 Screws 2 ScrewsMagnet Length 34mm 15mm 15mm 34mm

Diameter Flange 8mm 36mm x 22.5mm 36mm x 22.5mm 38mm (Oval)Diameter standoffFlange N/A 0mm 0mm 24mmDiameter Body 8mm 20mm 20mm 12mm

Fixings Push In 2 Screws 2 Screws 2 ScrewsReed Type Standard Standard Standard StandardNo. of Reeds 1 1 1 1

Operating Gap 10mm 18mm 18mm 7mm maxEncapsulation Potted Potted Terminals PottedProtection No No No NoAmount of cablewires 6 6 2 6Cable Length 1m 1m Terminals 1mCable Protection No No No No2 x 1K/1K for EOL EOL EOL EOL EOLEN50131/PD6662 grade 2 2 2 2




FLush Contacts - Grade 1(Service Use Only)

A small brown flush fitting contactdesigned to fit on wooden doors5 x terminals.

Product CodeQF-5-BN

A small white flush fitting contactdesigned to fit on wooden doors5 x terminals.

Product CodeQF-5

QF-5

QF-5-BN

Grade 1Model QF-5

QF-5-BNApplication A Small flush fitting

contact with 5terminals and noresistors to work onwooden doors

Material ABSColours White or BrowContact Length 15mmDiameter Flange 36mm x 22.5mmDiameter standoffFlange 0mmDiameter Body 20mmFixings 2 ScrewsMagnet Length 15mmDiameter Flange 36mm x 22.5mmDiameter standoffFlange 0mmDiameter Body 20mmFixings 2 ScrewsReed Type StandardNo. of Reeds 1Operating Gap 18mmmaxEncapsulation N/AProtection NoAmount of cablewires 0Cable Length 0Cable Protection No2 x 1K/1K for EOL NoEN50131/PD6662 grade 1



Chapter 5 - Day Alarms

03/12

Hoyles ExitguardThis new EXITGUARD uses a nine digit keypad for bothcontrol and programming. The tone of the high powerintegral alarm can be selected to distinguish it from otheralarms. The alarm can be silenced and reset using a fourdigit code or the EXITGUARD can re-arm automatically aftera preset delay once the door has been closed. SeparateDoor Open Too Long (DOTL) delays can be set for CodeReset and Auto Reset modes. There is also a Bleep In Offoption and Chime facility. There are a number of differentmodels to suit various applications:

EX204 is battery powered for use where a separate supplyof power is not available and the protected door is openedinfrequently or there is no requirement to sound the integralsounder for long periods. If necessary the integral batterycan be dispensed with and a separate 12vdc supplyprovided. This version has a logic output signal forconnection to a MULTIGUARD indicator.

EX205 is 12vdc powered for use where the protected doormay be opened frequently or the integral sounder may needto sound for long periods. This version can also be used asequipment.

There is a logic output signal for connection to aMULTIGUARD and there are volt free relay contacts forseparately signalling ON/OFF status and alarm conditions atremote points. This version cannot be powered frombatteries. EX206 is 230vac mains powered where theprotected door may be opened frequently or the soundermay need to sound for long periods. There is a logic outputsignal for connection to a MULTIGUARD and a volt free relaycontact for alarm condition.

This version is also supplied with 6 x AA alkaline batteries forstandby - Note: the batteries will not power the alarm relay.All are supplied with a surface mounting door contact, fixingscrews and a door warning label.

Fire Door CheckerThis unique feature enables the EXITGUARD to be used to verify that all emergency fire exit doors are available foruse when a building is occupied. Simply wire a switchedsignal from the intruder alarm control of the building to eachEXITGUARD. As soon as the alarm is switched off when thebuilding is opened staff are forced to visit each fire door inturn and release the door to ensure that it is ready foremergency use. The normal EXITGUARD functions are thenautomatically restored to give protection against un-authorised exit.

Features High Power Piezo Sounder Keypad Control Auto Reset / Re-arm Delays 0 - 88s Separate Door Open Too Long Delays for Keypad & Auto re-arm. 0s - 88s Bleep In Off option Front & Back Acting Tamper Switch Battery, 12 Vdc & Mains Versions Selectable Alarm Tones Visual Alarm Indication Chime Facility Alarm Relay Output On - Off Monitor Relay Fire Door Checker

Day AlarmsEXITGUARD is the ideal solution for security of fire exit doors in Supermarkets, Hotels, Restaurants, Warehouses, LeisureCentres and all types of public buildings. It satisfies the requirements of both fire and security officers.

An integral high power sounder is activated when the door is opened to warn those in the vicinity that security has beenbreached.

Intruder_Ch5_DayAlarms:Layout 1 20/03/2012 10:12 Page 1



Specification EX204 EX205 EX206

Supply Voltage 9vdc -15Vdc 11 - 14vdc 220/240Vac

Supply Current 35A quiescent 45mA quiescent < 0.5A

80mA max 155max

Battery 6 x AA Alkaline None 6 x AA Alkaline

Fusing None None 1A BS1662 Mains fuse

Visual Indication 5 Status LEDs 5 x Status LEDs Red, 1 x Power LED Green

Status LEDs strobe with sounder on alarm on all models

Integral Sounder Level 102 - 104 db at 1 metre dependant on input voltage

Four programmable tones, two loud, two quiet

Input All models: Double pole four wire. Alarm loop and tamper loop.

Remote Input for FDC Apply +ve signal when building is closed remove when occupied for fire

door verification

Bleep in Off Programmable on all models. Disabled on factory default

MULTIGUARD O/P All models normally Logic Hi, Logic Lo on alarm

Tamper Normally closed back & front acting tamper switch all models

Alarm Relay Contacts None SPCO 1A 30Vdc for connection to remote devices

On / Off Monitoring Relay None SPCO 1A 30Vdc None

Auto Reset Timer Programmable 0 - 88secs all models

Door Open Too Long

Timer Programmable 0 - 88secs all models

Enclosures Custom designed ABS plastic back box with mark resistant decal

Door Contact Surface mount magnetic reed contact with 1m 4 core cable.

Exitguard 24hr Door Alarm & Fire Door CheckerFire Door Checking Facility This unique feature enables theEXITGUARD to be used to verify that all emergency fire exitdoors are available for use when a building is occupied. Thiscan be achieved in one of two ways, either: A. Wire aswitched 12Vdc +ve signal from the intruder alarm controlof the building to each EXITGUARD. or B. Wire a switched12vdc +ve signal from a time clock to each EXITGUARD.

Whenever the alarm is switched off or when the time clockremoves the signal, the EXITGUARD will emit a double bleepevery 90 seconds and the LEDs will strobe. Staff must visiteach fire door in turn and release the door to ensure that it isready for emergency use. The normal EXITGUARD functionsare then automatically restored to give protection againstun-authorised exit. To conserve battery life it isrecommended that the EXITGUARD is centrally powered asshown below.





Exitguard 24hr Door Alarm & Fire Door CheckerFire Door Checking FacilityThis unique feature enables the EXITGUARD to be used toverify that all emergency fire exit doors are available for usewhen a building is occupied. This can be achieved in one oftwo ways, either:

A. Wire a switched 12vdc +ve signal from the intruder alarmcontrol of the building to each EXITGUARD. or B. Wire aswitched 12vdc +ve signal from a time clock to eachEXITGUARD.

Whenever the alarm is switched off or when the time clockremoves the signal, the EXITGUARD will emit a doublebleep every 90 seconds and the LEDs will strobe. Staff mustvisit each fire door in turn and release the door to ensurethat it is ready for emergency use.

The normal EXITGUARD functions are then automaticallyrestored to give protection against un-authorised exit. Toconserve battery life it is recommended that theEXITGUARD is centrally powered as shown below.

Product CodesEX204 9vdc -15Vdc Hoyles Exit GuardEX205 11 - 14Vdc Hoyles Exit GuardEX206 220/240VacHoyles Exit Guard

Method AFire Door 2

Storeroom Door

12vdc supply. This can be a separate supplybut the-ve should be common for both

When the intruder control is armed a 12vdc+veis applied to the R terminal of each EXIT-GUARD.

Fire Door 1

- + sIntruder Control

Fire Door 3

Fire Door 4

A 12 vdc+ve signal of at least 1 second dura-tion is applied to the R terminal of each EXIT-GUARD at suitable time intervals. This wouldusually be at least daily, possibly twice daily.Most time clocks with independent voltage freeclean contact would be suitable.

12 vdcPower -Supply +

240vac supply 240vac supply

Fire Door 2

Fire Door 1 Fire Door 3

Fire Door 4

Method B Storeroom Door

System Diagram




AIDALARM A600M Mains/12vdc PoweredAIDALARM A600M Mains/12vdc PoweredThis is similar to the A600B but can be used to create amore comprehensive system with the addition of a remotereset button, remote indicator/mute unit with separate LEDand sounder controls or overdoor light / sounder.

The A600M is fitted with a volt free output relay forconnection to a MULTIGUARD indicator or a buildingmanagement system. The A600M can be powered fromeither 12 volts dc from an external power supply or from230/240 vac mains power. There is also an option for arechargeable standby battery (not supplied) when poweredfrom the mains supply.

The integral 12 volt dc supply will provide power for externalitems such as overdoor lights etc.

Features DDA Compliant BS8300 Compliant High Power Piezo Sounder 12 Vdc & Mains Versions Audible & Visual Signalling Range of Accessories Selectable Alarm Tones Remote Signalling Output Choice of Four Warning Tones No Part B Building Regulation Conflicts

AIDALARM can also be used with REDIPRESS switch strip to enable an alarmcondition to be generated near ground level. Various other options are availableusing remote indicators, overdoor lights and resets. Please contact us for moredetails or visit www.hedsolutions.co.uk

Aidalarm




Product Codes609.001.206 Hoyles Light/Sounder S1678609.001.211 Hoyles Pullcord/LED S1600609.001.212 Hoyles Reset Button S1608609.001.214 Hoyles 30 SEC Timer RelayS312T609.001.215 Multipurpose RelayS1778SR Over door A/V unit stainless steel609.001.312 Hoyles S1608P Reset Button S/MA600M Hoyles mains/12VDC powered Aidalarm6504 Hoyles S312N DBL Pole Relay6698 Hoyles S320 SGL Pole Relay609.001.211 Hoyles Replacement cord for S1600 pull

cordS1609S Hoyles 2 position keyswitch on stainless

steel single gang plateS1613S Hoyles Mushroom headed latching button

with key reset facility on stainless steelsingle gang plate

S1705S Call button and LED on stainless plateS351 Hoyles Universal timer/relay module

Technical SpecificationDimensions: H X W X D

90 x 156 x 57mmPower: 12Vdc or 240VacCurrent: Output 200mm

Multiguard Disabled Toilet Alarm SystemThe AA31110D MULTIGUARD is a six zone disabled toilet alarm system for larger buildings that need centralindication of the origin of the call. It is designed to give dualre-assurance indication at the point of operation.

OperationWhen a pull cord (S1600) is operated its LED flashes and alocal buzzer (S/1678) sounds to inform the caller that the callhas been transmitted. When the call is silenced at the panelthe flashing LED becomes steady and the local buzzersilences to inform the caller that the call has been receivedand help is on the way.

If the caller pulls the cord again the LED on the pull cord willflash and the local buzzer sounds again. When help doesarrive the call is reset using the local (S/1608) reset button.All LEDs and buzzers, flashing or steady, are extinguished.An integral PSU and battery are included in the AA31110DMultiguard.

The above schematic shows only a three zone system forclarity. The system requirements for a six zone system areas follows:-

1 x AA31110D per six zone system1 x S1600 or S/1605 per toilet1 x S1678 per toilet1 x S1608 reset button per toilet




Multiguard

Features Custom Design Case Integral P.S.U. & Battery Option Integral Piezo Sounder Unique Labelling System Open or Closed Circuit Inputs D.P.C.O. Global Output Relay Lamp Test Option Nurse Call Version with late attendance Emergency re-call Facility Total Flexibility

Possible uses for the Multiguard are Perimeter ProtectionSystems, Personal Attack Monitoring, Fire Exit DoorMonitoring (e.g. EXITGUARDs/AIDALARMs) and Nurse CallSystems. There are also many other applications in the fieldof process monitoring such as Deep Freeze Alarms.

Technical SpecificationMG212000 & MG212100 General purpose annunciators.These Multiguards are the basic versions used for generalpurpose monitoring where zone isolation is not required.The MG212100 is fitted with an integral 12v 250ma PSU andstandby rechargeable battery. In all other respects these twoversions are identical.

When an alarm condition is detected an audible warning isgiven by the integral piezo sounder, the relevant zone LEDflashes, and a global relay energises to provide volt freeDPCO contacts for signalling to other equipment.

By pressing F1 the sounder is SILENCED, the alarmcondition is accepted, the global relay restores to normaland the LED flashes more slowly.

When the cause of the alarm condition has beeninvestigated and cleared F2 can be pressed to RESET thevisual indication. If a subsequent alarm condition occursbefore earlier ones are cleared then all prior indications aretemporarily suppressed in order to emphasise the latestevent.

MG216000, MG216010 & MG216110 Annunciators withZone Isolate facilities. These are specified where zoneisolation facilities are required.

The operation is similar to the basic units. However, they arefitted with six zone buttons Z1 - Z6 and, in the case of theMG216010 & MG216110, a keyswitch. An alarm condition isgiven in the same way as outlined above. In order toSILENCE the alarm condition the relevant zone button ispressed. When the cause of the alarm condition has beencleared the zone button is pressed again to RESET theindication. The zone buttons also have two further facilities,a. to act as ISOLATE switches and b. to facilitate LAMPTEST. Turning the keyswitch enables zone isolate. Pressinga zone button illuminates an LED to indicate that the zone isISOLATED. Pressing the button again reinstates the zone.Pressing any two zone buttons simultaneously tests each ofthe LEDs in turn. If more than six zones are needed then anumber of units would be stacked together. The primary unitwould probably be an MG216110 which would support upto 3 secondary units to expand the system capacity to 24zones. These secondary units could be MG216000 versionswhich would use the keyswitch and power supply of theprimary unit.

Hoyles MultiguardsThe MULTIGUARD 2000-6 is a general purpose six zone annunciator. The enclosure design is such that virtually anysystem size can be met by stacking units together.

To cater for the many different requirements of the emergency alarm market the Multiguard is supplied in a number ofdifferent guises, each of which offers a remarkable degree of flexibility.




MG222000, MG226000 Repeaters.It is often necessary to repeat indications at remotelocations. Each Multiguard master is equipped with a serialoutput to enable data to be sent to a number of repeaterssimultaneously. Each Multiguard master with an integralpower supply can support up to three repeaters. If morethan three repeat locations are needed then an externalpower supply should be used at the master. Because data issent out serially to the repeaters a reduced number of cablecores are needed. If indication only is requiredwith no control functions then a five core cable will suffice(an extra 3 cores are needed for each block of six zones) Ifcontrol functions are used then extra cores will be required,(consult our technical department for details).

Multiguard repeaters are identical in appearance and userfunctions to master units. Repeaters can be fitted withkeyswitches in the same way as master units for isolation orother purposes.

MULTIGUARD OptionsA keyswitch MG000010 can be added to any Multiguard notalready fitted with one. The keyswitch is a two position withdouble pole changeover contacts. If a keyswitch is used forisolation purposes then only the second pole is available foran alternative use. This is obviously restricted to functionsthat are coincidental with isolation. Two interface cards areavailable to enable Multiguard annunciators to drive externalequipment. The MG020000 uses serial data from a masterunit to provide up to 16 outputs capable of switching up to500ma per zone (subject to psu limit). Six outputs follow theannunciator LEDs. Six further outputs switch on alarmcondition and restore on reset. Two outputs follow theintegral sounder and global relay. Two outputs are notnominated.

These cards will fit into the Multiguard back box as shown.Dimensions 135 x 67 x 15 (mm).

The MG030000 takes the serial data from a master unit toprovide six relay outputs with voltage free DPCO contacts(1A/30vdc resistive). The activation of these relay outputs isdependant upon the software configuration of the masterunit. These cards are often used to interface with CCTVmultiplexers. The cards must be housed separately. Powerrequirement 12vdc 70ma. Dimensions 142 x 110 x 15 (mm)MG311000 Nurse Call annunciators.

The principle of operation is similar to the Multiguardgeneral purpose annunciators. There is a SILENCE buttonF1 but no reset button or isolate facilities are fitted. Integralpower supplies are NOT usually fitted to these versions asextra power is needed for call points and overdoor lights etc.

The control logic is non-latching. When a call is made anaudible warning is given by an integral piezo sounder andthe relevant zone LED flashes. The sounder can be silencedat the panel but must be reset at the call point.

Nurse call annunciators have facilities for Late Attendanceindication. When a late attendance condition is generatedthe Multiguard emits an interrupted pulsed toneaccompanied by an interrupted flashing LED for the relevantzone. Similar but continuous pulsed signals are used forEmergency Re-call. Signals are graded - late attendancetakes priority over standard calls and emergency re-call takepriority over late attendance.

Manual and Electronic Call Points can be used on the same installation. However, late attendance and emergencyre-call are only possible with electronic call points.

Nurse Call Items.S1600P is a manual latching call point with jumbo re-assurance LED. Pressing the button generates the call,pressing again resets it. The latching button can also beused to illuminate and overdoor indicator (see below). It designed for either surface or flush mounting on a standard single gang electrical box.

The S1663P is an advanced electronic call point capable ofstandard and emergency re-call. It is also generates a lateattendance signal. Calls are also reset at these points.

PillowPushes or Ceiling Pull-Cords may be connected toElectronic Call Points. When a call is generated a lateattendance timer is activated. If the call is not attended toand reset within a predetermined period (adjustable oninstallation at each call point between 30 seconds and 2/minutes) a late attendance alarm is generated at the panel.An emergency re-call can be generated at any time bypressing both the reassurance LED and the re-callbutton simultaneously at the call point. An output is availablefrom the call point for overdoor or corridor indicators.S1636RP is an overdoor or corridor indicator.

When used in a Multiguard nurse call system it derives itspower from either a manual or electronic call point. It isdesigned for either surface or flush mounting on a standardsingle gang electrical box.

EXITGUARD Self contained door alarm The EXITGUARD isthe ideal solution for the security of fire exit doors. Not onlyin nursing and residential homes but also in supermarkets,hotels, restaurants, warehouses, leisure centres and otherpublic buildings. It satisfies the requirements of both fire andsecurity officers. A number of versions are available andthey can be linked back to Multiguard annunciators. (Onlythe EX500 and EX600 are suitable for nurse callannunciators. Separate information available).

Product Codes609.001.202 Hoyles Multiguard 6ZN MG212100609.001.203 Hoyles Multiguard EXT MG212000609.001.204 Hoyles Multiguard RPT MG222000609.001.205 Hoyles Multiguard K/SS1778PR Overdoor light and buzzer with 8 red

LEDs white plastic plate609.001.211 S1600S1708S Reset button on stainless steel plate609.001.214 Hoyles 30 Sec Timer Relay S312T




Day Alarm Complete with tamper switch, 2 or 4 wire detection circuitsthe unit will operate in standby mode for 6 months and inalarm mode for 3 hours from a fresh, dry battery.

The Day alarm is provided with a standard 2 screw terminal magnetic contact and works on a closed loopdetection basis.

A battery test push button enables the battery to illuminatean LED if there is still sufficient charge in the battery.

All necessary fixing screws and 8m of twin core bell flex areprovided with this unit.

Technical SpecificationDimensions: 190H x 155W x 55D mmBattery: PP9 Dry CellOutput: 100dBA@1mMagnetic Contact: Normally open

Features On/Off keylock Battery test push Button and LED Easy to Install

Product Code 6356 Elmdene Battery Day Alarm

Elmdene Battery Day Alarm

This unit is designed to be a completely self contained alarm unit, ideal for situations which need to be guarded when thenormal day alarm is disarmed.




Zone Omit ModulesGrade 3 passive infra red/DualTec detection devices mustbe fitted with independent anti-masking and tamperdetection.

The unique design of the ZONEGUARD allows the various'end of line' resistors for each conditions to be passedthrough to the control panel unimpeded.

In this way the detectors resistors are monitored directly bythe panel. Any value of alarm resistor greater than 1k can beused by ZONEGUARD.

In its simplest mode ZONEGUARD uses its integralkeyswitch to omit or reinstate up to two detection zones.

Other modes are available using the integral keypad orexternal devices such as biometric reader or a combinationof keyswitch and keypad, this is useful where dualresponsibility is essential. Two timed entry/exit modes arealso available.

General RulesZones will always omit using an omit function. If any zonehas a detection condition during reinstatement, then it mustbe returned to omitted state and the detection conditioncleared and then reinstated.

Features Complies with EN50131 Grade 3 Designed for detectors with separate alarm,

anti-masking and tamper facilities Rear acting Tamper switch/Omits two detection zones Integral high security keyswitch 250,000+ differs Integral 9 digit keypad 500,000 differs Dual responsibility or combination mode gives over 300

million differs Zone status LEDs, Fault LED Integral piezzo sounder Output for remote sounder, Independent zone omitted relay Input for remote devices, keyswitches, shunt locks,

biometric readers etc.. User programmable code change/Timed entry/exit modes Suitable for use with other detection devices e.g. door

contacts

Wiring Diagram

Zone Omit ModulesZONEGUARD ZG800 is a Grade 3 EN50131 zone omit unit that fits between intruder detection devices and a control panelto allow the devices to be securely and safely omitted and reinstated without generating false alarms.




Product Code ZG800 Zone Omit Module

Operational modes

Integral keyswitch mode. (Factory default) The keyswitchis a 7 pin tumbler with over 250,000 differs. Grade 3requirement is for 30,000+ differs

Integral keypad mode. The integral 9 digit keypad using a6 digit code gives over 500,000 differs. Grade 3requirement is for 100,000 differs.

A 10 second keypad lockout is incorporated after 5incorrect codes are entered. 'Start again' is alsoincorporated if no digit is entered within 8 seconds.

Remote latching input mode, e.g. keyswitch. This would need to be at least 30,000 differs.

Remote non-latching input mode, e.g. biometric, cardreader or similar. Modes 3 and 4 permit the ZONEGUARDto be fitted within one of the protected zones.

Combination of integral keypad & integral keyswitch. The9 digit keypad used with a 4 digit code and the integralkeyswitch gives over 3000 million differs. Use of a 4 digitcode is only possible in this combination mode.

This mode is useful where dual responsibility is desirable.

Timed entry/exit, integral keyswitch to execute.

Timed entry/exit, integral keypad to execute.

These last two timed entry/exit modes offer a higher degreeof security because the procedure must be completed withina time window and the ZONEGUARD can be sited withinone of the protected zones.

Any device can be used to activate the time window, thiscould be a door contact or detector. The activation deviceshould not be considered to be part of the intruder detectionsystem but simply a device to start a procedure.

The ZONEGUARD requires a supply of 12vdc. (Quiescent120ma in omitted state 200ma peak during programming).The non-volatile memory stores mode settings, time delaysand codes in case of power down.



Chapter 6 - Detectors Beam

03/12

Optex AX-130T/200The AX-70/130TN Twin beam photoelectric sensors,designed for short-range outdoor or long-range indoorapplications. Using twin beams of pulsed infrared energy,reliable operation is possible in the worst conditions - up to99% of the emitted radiation can be blocked by rain, fog orfalling snow and the beams will still operate.

By utilising an automatic gain control circuit, gradualchanges in signal strength caused by weather conditionsare continually monitored and the trigger level adjustedaccordingly to compensate. In addition, the unique anti-frost design allows for trouble-free operation when thecover is completely frosted over. The Series achieves theIP65 high durable structure by using the rubber packing forall conceivable points and it prevents the rain, dust, and tinyinsect getting into the unit.

AX-100/200TF is a compact photoelectric detector with theIP65 high durability, and stable detection performance.These features reduce false alarms drastically - caused byoutdoor severe environmental changes and provide a widerange of applications.

AX-350/650TF Series photobeams are dual beam long-range sensors with a host of sophisticated extra facilities.They are ideal for larger installations where they arecapable of external ranges up to 200m. The beams offerfour site-selectable frequencies that allow them to bestacked one above another to provide a wall of coverage.To reduce setup and alignment time to a minimum, AX-350/650TF units include a one-man alignment facility, A third infrared beam sends alignment information from thereceiver to the transmitter and allows the installer to see thestatus of the received signal at the transmitter.

Input voltage is between 10.5 and 30V DC giving flexibilityin system design, particularly where large sites have remotepower supplies. The AX-350/650MKIIs dual beams reducethe potential for false activation from birds or blowingdebris.

The AX-350 & 650DHMKIII are the Worlds First NextGeneration photoelectric sensors with full digitalcommunication.

This new AX series delivers excellent performance inpreventing missed and false alarms, while allowing for eveneasier installation which makes the whole installationprocess more cost effective.

By using full digital packet communication, the new AXseries is able to transmit the address setting, coveropen/close information and the arrival level of beam powersimultaneously. The new Time Division Multiplex Systemprevents any crosstalk beams when multiple beams areinstalled on site or when beams are stacked. This greatlyreduces the risk of false or missed alarms, as well asremoving the need to manually choose channel settings.

The new IP65 rated casing prevents problems caused bywater or dust, while the new Anti-Frost hood cover preventsany build-up of frost over the upper and lower beams.Input voltage is between 10.5 and 30V DC giving flexibilityin system design, particularly where large sites have remotepower supplies.

Note: These cannot be mixed with any other beams fromthe range on the same site. For more information, pleasecontact Optex technical department.

AX-701/130T Infrared PhotoelectricBAX-701/130T Infrared PhotoelectricBeam

Twin beam photoelectric detectors, designed for short-rangeoutdoor or long-range indoor applications.

Using twin beams of pulsed infrared energy, reliableoperation is possible in the worst conditions - up to 99% ofthe emitted radiation can be blocked by rain, fog or fallingsnow and the beams will still operate.By utilising an automatic gain control circuit, gradualchanges in signal strength caused by weather conditionsare continually monitored and the trigger level adjustedaccordingly to compensate. In addition, the unique anti-frost design allows for trouble-free operation when the coveris completely frosted over.

Features Twin Synchronised Pulsed Beams Designed

for Greater Stability Selectable 4-Channel Beam Frequencies Adjustable beam interruption time - long interruption time

catches an intruder but allows a small animal to passthrough

Twin beams require simultaneous interruption to createactivation

99.5% beam blocking stability Easy installation and alignment using viewfinder for rough

alignment and voltage meter jacks for fine-tuning Sealed optics to prevent ingress of insects and dust

Photoelectric Beam Detectors

Beam Detectors While movement detectors detect the movement of the body in a room the following detector will monitor the entrythrough a protected perimeter.

Intruder_Ch6_Detectorsbeam:Layout 1 20/03/2012 10:13 Page 1




Product CodesAX-130T Optex External/Internal Synchronised twin

beam, 40M outside rangeAX-200TF Optex External/Internal Synchronised twin

beam, 60M outside rangeAX-350TF Optex External/Internal Synchronised

Photoelectric twin beam, 100M outsiderange. 4 Channel frequencies

AX-650TF Optex External/Internal SynchronisedPhotoelectric twin beam, 200M outsiderange. 4 Channel frequencies

AX-350DHMK111 Optex External/Internal DigitalSynchronised twin beam, 100M outsiderange.

AX-650DHMK111 Optex External/Internal DigitalSynchronised twin beam, 200M outsiderange.

Model AX-100TF AX-200TFDetection Method Infrared beam interrupted detectionMaximum detection range 30m 60m Maximum arrival range 300m 600m Interruption period Selectable between 50, 100, 250, and 500m sec.Selectable beam frequency 4 channelPower supply 10.5 - 28V DCCurrent consumption (transmitter + receiver) 44mA(max.) 48mA (max.)Alarm period 2 sec. (1) nominalAlarm output N.C./N.O. 28V DC, 0.2A (max.)D.Q. Output N.C. 28V DC, 0.2A (max.)Tamper switch Opens when cover is removed at 28V DC, 0.2A max.Operating Temperature -35C to +60C Use the optional heating unit (HU-3) in conditions of -25 C or below.Operating Humidity 95% max.Alignment angle 90 Horizontal, 5 Vertical Mounting Wall and pole mountingWeight (transmitter + receiver) 700g Housing protection (EN 00529) IP65

Indoors OutdoorsAX-130T 100m 200m

Model AX-350TF AX-650TFDetection method Infrared PhotoelectricRange Outdoor 100m 200m Indoor 200m 400m Maximum arrival distance 1000m 2000m Beam characteristics Pulsed InfraredSelectable beam frequency 4 channelInterruption period 50,100,250,500 msec (4 steps)Power Supply 10.5-30VDC

Normal operation 60mA Max Normal operation 82 mA maxCurrent consumption T:11mA+R49mA T:13mA+R49mA(transmitter + receiver) During optical alignment 78mA max During optical alignment 80mA max

T:11mA+R67mA T:13mA+R67mAAlarm period 2sec(1) nominalAlarm output Form C Relay (28VDC 0.2A max)Tamper Switch N.C. opens when cover is removedOperating Temperature -35C ~ +60C Environment Humidity 96% MAXAlignment Angle 10 VERTICAL, 90 HorizontalAlarm memory LED indicates memory status. Selectable Negative & PositiveEnvironmental disqualification Form C relay operates when beam energy has been gradually reduced to abnormal level Circuit Gradually reduced to abnormal levelMounting Wall or PoleWeatherproof IP54Weight 2750g Transmitter and Receiver




AX-100/200TFRThe new AX-100TFR and AX-200TFR from OPTEX is a revolution in the perimeter security industry, offering a significant cost saving alternative to traditional hardwired system. No trenching is required, drastically reducing installation costs. The unit comes wireless ready with a multifunctional back box and is compatible with most manufactures wireless systems.

The AX-TFR series uses four 3.6V batteries with an averagelifespan of 5 years on the 100ft model and 3 years on the200ft model.

Note: Use 2 x Honeywell DODT8M Transmitters

Features Long battery life AX-100TFR: approx. 5 years AX-200TFR:

approx. 3 years Easy battery replacement Triple tamper functions Low battery output and LED indication Intermittent output function Compatible with numerous wireless transmitters Battery saving timer function for wireless transmitters International protection IP55 Easy angle adjustment function Beam interruption adjustment function 99% Beam blocking stability N.C./N.O. output selection switch 4 selectable beam frequencies

Product CodesAX-100TFR OPX 30m RF Twin Beam unitAX-200TFR OPX 60m RF Twin Beam unitLSH20 Battery for AX-TFR 3.6v 13Ah (SAFT)

Model AX-100TFR AX-200TFRRange 30m 60mMaximum arrival distance 265m 530mDetection Method Infrared beam interruption detectionBeam frequency selection 4 channelInterruption period Variable between 50,100, 250, 500 msec (4steps)Power Source 3.6V 13.0 Ah: LSH20 lithium batteries manufactured by SAFT (not installed)

Transmitter: 2 units Receiver Cuurent Draw 620A T:300A + R : 320 A 810A T:490A + R : 320 A

(at 25oC, 3.6 VDC) (at 25oC, 3.6 VDC)Battery Life* Transmitter 5 Years 3 Years

Receiver 5 YearsAlarm output Form C-Solid State Switch: 3.6VDC, 0.01AAlarm period 2 sec (+1) nominalD.Q. output Form A/B-Solid State Switch: 3.6VDC, 0.01A Low battery output Form A/B-Solid State Switch: 3.6VDC, 0.01A (Transceiver and Receiver)

Output **Tamper output for front cover Form 3.6VDC, 0.01A Activates when cover removed (Receiver removed)Tamper output for back box Form 3.6VDC, 0.01AActivates when either back box or chassis is removed

from the installmentAlarm Indicator 1) Light on - IR Beam nor received

Indicator (Receiver) 2) Flickering Light - IR Beams not received sufficiently3) Light off- IR Beams received

Power Power ON: ON(Transmitter) Power OFF: OFFLow Battery Voltage reduction:Flicker

Operating Temperature -200C - +60oCOperating ambient humidity 95% MaxAlignment angle + 90o Horizontal, + 5o VerticalMounting Indoor /Outdoor, Wall Pole/Tower mounting (Optional main unit mounting brackets

are required, when the units mount in the tower)Weight 1600g (Total weight of transmitter + receiver excluding accessories)International Protection IP55Specifications and design are subject to change witout prior notice *The value is based on the condition that it is used within the ambient temperature range of 20 to 25oC** The transmitter is also equipped with AX100/200 TFR (BE)



Darwin is the new CIAS Active Infrared Barrier.

Manufactures with high quality aluminium it is very strongand resistant, suitable for offsetting any expansion due totemperature peaks. Its small size (22.5X23 mm) makes itinvisible when it is installed between window casings.

Its modularity makes Darwin perfect for use with differentprotection systems, both indoor and outdoor. It is equippedwith self-alignment system, alarm LED and "Plug and Play"Fixing system which makes it easy and quick to install thedevice.

No line synchronism is required as each ray is recognisedthrough separate optical codes. This results in opticalSynchronism with different and unique identification codesfor each single beam. The alarm operation Logic is managed by a micro-processor which automatically setsthe configuration of the beams as adjacent, crossed or multiple according to ray interruption and speed of interruption.

Darwin is available with two colours: Beside the classicblack is available the new colour aluminium, really hi tech inthe look and adaptable also to light coloured rooms.

Technical Specification616.017.100 616.017.101 616.017.102 616.017.103

Indoor Range 12m 12m 12m 12mOutdoor Range 6m 6m 6m 6mPower Supply 13.8Vdc 13.8Vdc 13.8Vdc 13.8VdcConsumption 30mA 40mA 50mA 60mADimensions (WxD mm) 23 x 22.5 23 x 22.5 23 x 22.5 23 x 22.5Height 0.5m 1.0m 1.5m 2.0mTamper Output Anti-removal & anti-openingAlarm Logic Automatic Beam InterruptionSynchronisation Automatic Optical SynchronismColour AluminiumCertification EN50131 Grade 3Other Function Anti-Insect

Features Active Infrared Barrier Interior and exterior use Self alignment system Quick and easy to install Small Modern and unobtrusive design Slim line Robust aluminium housing 2 - 8 infrared beam versions Sunlight filter IP55 rated EN50131 Grade 2 environment Class

Product Codes616.017.100 Darwin Active Infra-red Barrier for

indoor and outdoor Use (2 beam, 0.5m)616.017.101 Darwin Active Infra-red Barrier for indoor

and outdoor Use (4 beam,1m) 616.017.102 Darwin Active Infra-red Barrier for indoor

and outdoor Use (6 beam,1.5m) 616.017.103 Darwin Active Infra-red Barrier for indoor

and outdoor Use (8 beam, 2m)616.017.104 GPS Darwin Beam Brackets (1x Pair).

Each pack contains a pair of brackets forone side of the Beam unit only. You willneed 2 pairs of brackets , for 1 set ofBeams


GPRS Darwin Active Infra Red Barriers



Chapter 7 - Detectors Glassbreak

03/12

Aritech Glass Break DetectorThe Aritech GS 110 Glassbreak Detector has been designedusing the latest electronic techniques. This enables thedetector to contain all the necessary circuitry for excellentdetection whilst filtering out and rejecting all unwantedsignals that would normally result in a nuisance alarm(s),e.g. ultra-sound, radio frequency interference, etc.

The Model GS 110 will operate from 10-15 vdc, providing a2m radius of protection. Suitable for use on standardwindow glass or plate glass, the GS 110 sensors detect afrequency of150 Khz which appears when the glass isbroken.

Technical SpecificationPower: 10 -15 Vdc

Standby 10 mA nominal at 12 V,Alarm 26 mA nominal at 12 V

Alarm output: SPST relay NC 100 mA/28 Vdc(Fail safe)

Coverage pattern: 2 metre radiusEnvironmental limits: -40C to + 70CDimensions: 28 x 28 x 12 mmWeight: 28 gColour: whiteCable length: 3.0 mEN5013: Grade 2

Features Unobtrusive design 2m radius protection Easy to install Relay alarm contact 10-15 Vdc operation Low current Latching alarm L.E.D. Fail safe No adjustment Tamper proof Temperature limit 40C to + 70C Waterproof

Product Codes5443 Aritech GS110 Piezo break glass detector

2m (radius) range8182 Adhesive kit for Piezo break glass detector

Coverage Pattern

Glass Break DetectorsGlass break detectors are used to provide early application of an attack on glass surface. There are generally two types ofdetector, on glass and off glass. Off- glass detectors operate when they hear the frequency on breaking glass.

The advantage of this type of unit is that it can be mounted discreetly to the wall or ceiling near the window. On glass detectorsare fixed (usually with glue) to the actual surface of the window.

Intruder_Ch7_DetecGlassBrk:Layout 1 20/03/2012 10:14 Page 1



Aritech Shatterproof DetectorThe Aritech 5815NT-ART Series ShatterPro3is the latestbreakthrough in Aritechs advanced series of acousticglassbreak sensors. In lab tests, ShatterPro3 provides 250percent better false alarm immunity than the popularShatterPro.

II (GS 903N)The coverage pattern can be easily adjusted to fit small orlarge rooms. Interference outside the range will not causefalse alarms. The ShatterPro3 detects in a full 360coverage pattern, with a maximum 7.6 m radius from sensorto glass.

Using Aritechs patented Pattern Recognition Technology,the sensor listens for actual patterns of breaking glass whileeliminating most false alarm patterns. ShatterPro3 listensacross the glassbreak frequency spectrum for greater falsealarm immunity.

Available with a round or rectangular housing, ShatterPro3can be tested without opening the sensor by activating theAritech hand-held glassbreak tester at close range. A simplehand-clap feature lets end-users confirm at any time that theShatterPro3 is operational.

Technical SpecificationInput voltage: 9 to 16 VdcCurrent: Typical 15 mA

Maximum 25 mADetection range: 0.9 - 7.6 m x 360Operating temperature: 0 to 50CRecommended glass thickness: Plate 2.4 - 6.4 mm

Tempered 3.2 - 6.4 mmWired 6.4 mmLaminated 3.2 - 6.4 mm

Dimensions: 115H x 70W x 20D mm EN50131: Grade 2

Features 250 percent better false alarm immunity Adjustable to room size All-new, easy-access design Designed for quiet occupied areas on the perimeter loop Consistent detection, even of soft, quiet glass-breaks Detects through blinds and light drapes End-user can test sensor operation with a clap of the

hands Alarm memory

Product Code 616.008.011 5812EZ-W Sentrol ShatterPro3

Rectangular Detector




Features

Honeywell FG-1608T Glassbreak Detector and Magnetic ContactThe FG-1608T Series Break Glass Detectors apply DigitalSignal Processing using an on board Micro-controller toinstantly digitise sounds into mathematic sequences, distinguishing common false alarms from breaking glass.

The digitised signal is compared against eight conditions:Flush level threshold, audio level threshold, time coincidence, flex/audio ratio, attack threshold, flex duration, audio duration and microphone overload. If these eight conditions match a glassbreak, the detectoralarms.


Features Superior False Alarm Immunity Glassbreak Plus Forced Entry Detection Easy Installation Fast, Easy and Accurate Testing Easily Verify Detector Operation at Any Time Field Proven Glassbreak Protection

Product Code 5446 Glassbreak Detector and Magnetic

ContactDimensions: Glassbreak Detector: 114mm x

30mm x 23mm (h x w x d)Magnetic Contact:114mm x 13mm x 23mm (h x w x d)

Weight: 85gRange: 2.4m MaximumMounting Locations: Mount on doors, interior window

frames, corners, walls or ceilingsAlarm Relay: Form A(NC) / 250mA @25 VdcAlarm Duration: 5 Seconds (unaffected by alarm

LED latching)Tamper Switch: Combination cover and wall

tamper, 25 mA @ 24 VDCPower Requirements: 8 - 14 VDC, 17 mA typical @ 12

VDC 30 mA max. AC ripple: 4volts peak to peak at Nominal12VDC

Operating Temperature:0C - 49C

ESD Immunity: 10 kV; discharges of either polaritytoexposed surfaces

RF Immunity: 30 V/m, 10 MHz - 1000 MHzSuitable for use with EN50131-1

Approvals: UL Listed, PD6662 Security Grade2 Environmental Grade II

Type Min. Thickness Max. ThicknessPlate 2.4mm 6.4mmTempered 3.2mm 6.4mmLaminated* 3.2mm 14.3mmWired 6.4mm 6.4mmCoated** 3.2mm 6.4mmSealed Insulating * 3.2mm 6.4mm

The sound of breaking glass isdigitally simulated by the FG-701 andis compatible for testing all Intellisenseglassbreak detectors. Testingglassbreak detectors upon installationis highly recommended.

Product Code 9094 FG-701 Glassbreak

Simulator

FlexGuard Glassbreak Simulator/Tester




Honeywell FG-1625TAS Glassbreak Detector The new FG-1625TAS Glassbreak Detector uses the latesttechnology to provide faster response and increased falsealarm immunity. The FG-26TAS is designed to allow fast andeasy installation. Optimum operation can be quicklyverified using the FG-701 Glassbreak Simulator.

FlexCore Signal ProcessorThe FlexCore Signal Processor is an Application-SpecificIntegrated Circuit (ASIC), which processes sound data inparallel rather than sequentially; for faster, more accuratedetection decisions.

The combination of proven FlexGuard performance with thespeed of FlexCore processing provides unmatched falsealarm immunity without compromising detection.

Easy Installation and Setup Intellisenses patentedtechnology allows remote activation of Test Mode(w/simulator). The FG-1625TAS has a centred wireentry hole, 45 terminal blocks, and EOL terminals.A hand-clap feature verifies that the detector is functioning.No sensitivity adjustments are required.

Technical SpecificationPhysical Dimensions: 98 mm x 62 mm x 21.8 mmWhite high impact ABS plastic housingWeight:

Product only 90 gPkgd. Product 116 g

Range: 15 (4.6 m) maximum, omni-directionalno minimum range

Alarm Relay:FG-1625TAS Form A, 125 mA max. 25 Vdc max.FG-1625TAS Form C, 125 mA max. 25 Vdc max.Alarm Duration: Five seconds (unaffected by alarm

LED latching)ESD Immunity: 10kV discharges of either polarity

to exposed surfacesPower Requirements: 6 to 18VDC; 12mA typical at

12Vdc, 22mAmax, (Latched LED) AC ripple: 4Vpeak-to peak at Nominal 12Vdc

RFI Immunity: 30V/m, 10MHz to 1000MHzOperating Temperature: -10 to 50 CStorage: -20 to 50 C

Features FlexCoreTM Signal Processor Easy Installation and Setup Mount the Detector Anywhere Covers All Glass Types Multiple Domain Signal Analysis Remote Test Mode Enable/Disable Enclosed PC Board Grade 3 EN50131

Product Code FG-1625TAS FG-1625TAS Glassbreak Detector




Honeywell FG-1625ZThe FG-1025Z performance is achieved through the use of 2microphones and Time-of-Arrival (TOA) processing. When asound is generated in the room, the microphone nearest thesound will hear it first. The Micro-controller in the unitmonitors all sound events received by the microphones andprocesses only those received first at the front microphone,which is pointed toward the protected zone. Sounds arrivingat the back microphone first are simply ignored.

Because of the symmetry of the unit, the space surroundingthe front and back microphones is divided evenly betweenprotected and excluded zones. A region 20 degrees wide on each side of the unit is the keep-out zone. In this regionsound may or may not be processed. Glass to be protectedshould never be within the keep-out zone. However, false-alarm rejection is still high in this region.

Technical SpecificationDimensions: Glassbreak Detector: 108mm x22.4mm x23mm ( x d)Weight: 128gRange: 7.6m MaximumMounting Locations: CeilingAlarm Relay: Form C(NO/NC)\125 mA @ 25

VdcAlarm Duration: 5 Seconds (unaffected by alarm

LED latching)Tamper Switch: Combination cover and wall

tamper,25 mA @ 24 Vdc

Power Requirements: 8 ~ 14 Vdc, 25 mA @ 12 VdcAC ripple: 4 volts peak to peak at

Nominal 12VdcOperating Temperature: 0C ~ 49CESD Immunity: 10 kV; discharges of either

polarity to exposed surfacesCommand Input/Remote LED Enable: Active low (0 1.5V). High

impedance for inputs less than 5.6 V20 mA/16 V max.

Approvals: UL Listed, PD6662 Security Grade 2,Enviro

adt intrusion alarm catalogue

Documents