Advanced Mixing Technologies

IN-TANK BATCH MIXING

INLINE MIXING & MILLING

BOTTOM MOUNT DISPERSING & EMULSIFYING

POWDER CONVEYING & INDUCTION

2 - INTRODUCTION & INDEX

Admix®

Committed to adding value to your production process

The Admix mission is to be the premier provider of sanitary mixing andmilling equipment for liquids and powders into liquids. As a food processing

company, whether you make prepared foods, salad dressings, beverage emulsions,sugar slurries, poultry marinades, cereal coatings, tomato sauce, cheese products, fruit

fillings, ice cream mix, or other products, Admix can improve your production process.

For the pharmaceutical and cosmetics/personal care industries, we deliver highquality oral suspensions, tablet coatings, antacid formulas, sugar and saline solutions,

skin care products, shampoos, creams, lotions, sun care products, detergents, and fragrances.

Providing results and solutions through application expertiseOur portfolio of highly effective equipment, application experience, and

customized solutions bring unparalled value to every process. We are results oriented,with the reputation and resources to ensure that our mixers exceed your expectations.

Focused in industries that require the strictest sanitary practices, Admix has an installation base ofover 5,000 mixers operating in over 2,000 production plants. Chances are we have already worked

extensively with the ingredients that are crucial to your product’s success, including Xanthan andother gums, soy and whey proteins, aspartame, sucralose and other sweeteners,

Carbopol®, Methocel® and various viscosity enhancers.

Mixers for Sanitary Applications

In-tank Batch Mixing Page BenchMix & Pilot Plant............................................... 3Rotosolver High Intensity Dispersers............................ 4Rotostat High Shear Emulsifiers................................... 5Rotomixx Low Speed, High Efficiency Mixers.............. 6RotoMAXX II High Torque, Slow Speed Agitator......... 7FlowShear Bottom Mount Disperser .......................... 15

Inline Mixing, Milling & Particle Size ReductionDynaShear High Shear Mixers.................................... 8Admixer Low Shear Static Mixers & Blenders............. 9Boston Shearpump High Viscosity Emulsifier.............. 10Boston Shearmill Wet Mill / Homogenizer.................. 11

Powder Induction & Conveying Optifeed / PIC System .............................................. 12Fastfeed Powder Induction & Dispersion System....... 13VacuShear Vacuum Liqui-Processor........................... 14

Accessories & ServicesLift Stands & Seal Technology.................................. 16Turnkey Mixing Systems / Control Documentation... 17Laboratory & Process Support .................................. 18Customer Service ..................................................... 19Partnering with Admix.............................................. 20

Avicel® is a trademark of FMC CorporationCarbopol® is a trademark of The Lubrizol Corporation

Opadry® is a trademark of BPSI Holdings LLCMethocel® is a trademark of Dow Chemical Company

admix.com/equipment

IN-TANK BATCH MIXING - 3

BenchMix™ & Pilot PlantHigh Shear Lab Mixers

Ideal for product development and formula optimizationOur BenchMix is the most versatile, powerful benchtop lab mixer on the market. No other benchtop lab mixer combines power, speed and versatility all in one unit.

In many product development labs, new and modified formulas are successfully produced on the bench, but these results cannot be duplicated when scalingto actual production runs. Admix offers a process assurance warranty, sowhether you’re making lab batches of <2,000 ml or up to 80 liters in thepilot, you will get precise scalability from the lab through 10,000gallons - GUARANTEED.

BenchMix benefits for your lab and process.Bring new products to market faster.All results can be accurately scaled to production volumes.Complete versatility with multiple high shear heads, low speed impellers and props .Models available from 0.5–3 HP at up to 12,000 RPM .Process volumes from 1–20 liters .Simple touch panel control with integrated on-screen help

Ideal for pilot plant and small production runs

Pilot plant units (Rotosolver RS-02 and Rotostat XP-02) operate up to 3,450 RPM with larger mix heads than our BenchMix models, providing the ideal tip speed and shear rate for many applications.

Pilot plant models are designed for batch sizes from 5–20 gallons (20–80 liters) depending on product viscosity, density and solids levels.

Rotosolver RS-0240”H x 22”W x 18”D

BenchMix.com

4 - IN-TANK BATCH MIXING

. Reduce energy consumption by 30%. Increase overall shear rates. Reduce batch times for increased capacity. 3-A compliant & easy to CIP. Retrofit available for existing installations. Wet out & disperse Carbopol®, Methocel®, Opadry®, Avicel®, CMC, xanthan and guar gum, soy proteins, starches, pectin, carrageenan, and other tough hydrocolloids and ingredients

Rotosolver®The Ultimate Energy-Saving High Shear Mixer

Rotosolver delivers performance & efficiencyThe Rotosolver high shear mixer is a recognized industry leader,

offering processors excellent performance and efficiency.

Less energy consumption: Mixing impeller designed to efficiently apply allenergy to produce optimal shear and direct product flow. Improved dispersion: Innovative design combines the shearing capabilities of a

high speed toothed rotor and a slotted stator with high flow and circulationfrom the dual rotor blades. This unique head design provides a 4-stage

mixing action delivering 100% dispersion in less time.

Easy-to-clean design ensures that conventionalCIP procedures provide maximum

cleanability. Meets or exceeds3-A TPV (#73-01), USDA-AMS

and USDA-Dairy sanitary standards.

LESS ENERGYCONSUMPTION30%IMPROVED DISPERSION10%

Flow pattern:Blue arrows = flow into the mixing head

Purple arrows = expulsion from the mixing head

�

Rotosolver.com

IN-TANK BATCH MIXING - 5

Rotostat® 1The Unconventional Rotor-Stator High Shear MixerUnmatched performance and efficiencyNo other rotor-stator mixer provides the optimum shear and pumping rates of the Rotostat. The multi action of the high speed rotor, unique revolving stator and the large lower prop dramatically reduces dispersion and overall mix time to less than 10 minutes for many applications. This combination of mix heads results in lower power consumption and 100% product uniformity throughout the batch. Process viscosity can range from waterlike to over 50,000 cps without requiring auxiliary agitation.

Give your process a boost. 100% lump-free dispersion, hydration, and emulsification . Superb emulsion stability for extended shelf life . Deagglomerate soft and hard particles within 60 seconds . Easy, accurate scale up from benchtop to any production size model with our exclusive Mighty Mix™ parameters

Flow pattern:Blue arrows = flow into the mixing head

Purple arrows = expulsion from the mixing head

Rotostat.com

6 - IN-TANK BATCH MIXING

THE DIFFERENCE!Achieving Maximum Flow

and Circulation

Jetfoil™Maxifoil™

J-style Prop

Rotomixx®

Cost Effective, Reliable Portable Batch MixerHigh Efficiency Impellers and All SS Construction

Rotomixx impellers combine 25+ years of hydrofoil blade technology into three distinct, high performance designs, including our 3-blade Jetfoil, our ultra sanitary J Prop, and our unique wide blade Maxifoil.

All are designed to provide up to 200% more flow per horsepower over conventional impellers. Our gearbox, motor, bearing frame,

shaft, and impeller are all 316SS. Available as a direct drive at up to 3450 RPM or gear drive down to 235 RPM.

Design Advantages

. Total washdown capability with 3-A TPV (#73-01) compliance . Superb corrosion resistance compared to other “paint-free” mixers . Mounting options ranging from heavy-duty clamps to sanitary ferrules/clamps . Available from 0.5–3 HP for 50–6,000 gallon tanks . Replaces outdated painted portable mixers. Validation documentation & factory acceptance testing (FAT) for GMP and FDA requirements

Not all equipment shown meets 3-A compliance

Gear driven models come standard with Jetfoil™ blades which offer a 200% increase in flow per horsepower over conventional pitch blade turbines.

Direct drive models come standard with special wide blade, high volume Maxifoil™ blades, or with custom, machined and threaded J-style props, which are polished and sealed against contamination, but removable when necessary for inspection.

Optional custom impellers and attachment methods are available based on your requirements.

Rotomixx.com

�

IN-TANK BATCH MIXING - 7

The only all stainless steel, low speed, large capacity agitator

The robust RotoMAXX II, with right angle helical bevel gearbox, is designed for the most demanding operating environments and stringent CIP, washdown, pressure washing, and steam cleaning conditions.

The modular design allows for multiple shaft diameter, gear ratio, and motor horse power combinations with flex couplings between the motor/gearbox and gearbox/drive shaft to protect the gear drive from shock loads and dampen vibrations while isolating shaft bending moment and deflection loads from the torque loads on the gearbox.

RotoMAXX ™ II

RotoMAXX II advantages4 Tank volumes to 60,000+ gallons4 Entire unit is designed for total wash-down duty for food, pharmaceutical and cosmetic industries4 Maintenance-free, greased-for-life, sealed bearings in bearing frame4 Premium high efficiency, ground helical bevel gearing provides 20-30% more efficient gearing than conventional worm gearing4 Synthetic food grade lubrication in gear drives4 Up to 15 HP input4 Output torque up to 6100 inch-pounds with 1.25 service factor

Premium 316SS machined for greater corrosion resistance

Impeller shaft length available up to 144”

Motors are 300 series stainless steel

High Torque, Right Angle Slow Speed Agitator

Jetfoil™ impeller technologyprovides 200% greater pumping rate over conventional axial blade impellers

Dual, single-lip seals provide ultimate cleanability

RotoMAXX.com

�

. Total washdown and CIP capability with 3-A TPV (#36-01) compliance . Low maintenance design for minimum downtime – no bushings, wear sleeves, shims or bearing supports to wear out. Disassemble and reassemble for inspection and cleaning in less than 5 minutes!. Two models are available to process 10–175 GPM.

Seal pressure ratings up to 450 psi @ 350° F. Balanced single or double-barrier mechanical seals are available, designed for sanitary applications with CIP requirements

8 - INLINE MIXING & MILLING

DynaShear®

Inline Dual Stage High Shear Mixer / EmulsifierDesigned for continuous processing – 24/7

The DynaShear represents the latest technology for sanitary inline continuous processing, or batch processing with recirculation. The DynaShear will blend,

dissolve, deagglomerate, disperse, and emulsify a wide range of fluids and semifluids, and is particularly effective for wetting out powders into a liquid. It is the first inline

mixer featuring a tandem head design that combines the benefits of both an axial and a radial stage, creating excellent shear and flow characteristics. The result is a processing

unit with droplet size reduction capability of 2–3 microns and a very narrow distribtion, while providing flow capacities that are substantially higher than existing inline mixers.

DynaShear advantages – making your job easier and faster

Dual stages: primary axial and secondary radial

DynaShear.com

�

INLINE MIXING & MILLING - 9

Admixer™

Inline Static Mixers and Blenders for Low Shear Processing100% product uniformity and distribution at any viscosity levelThe Admixer excels at processing any combination of miscible fluids regardless of flow rates, viscosity or density profiles. Where laminar flow conditions exist for thick fluids, complete homogeneity is achieved through geometrically precise flow division. In turbulent flow, the Admixer utilizes radial momentum and inertia reversal to eliminate stratification of flow, temperature and all processed materials.

No moving parts, no electrical requirements and easy installation . Standard 316SS construction with 3-A TPV (#35-04) compliance . Quick disconnect TriClamp® type ferrules for ease of assembly . Standard design includes a 30Ra or better finish for elements and housing, with all welds completely ground, blended and polished. Element assemblies are quickly removable for inspection and COP. Off-the-shelf stock availability from 1–4” diameter. Low maintenance and capital costs . 50-90% less power consumption than mechanical mixers

TriClamp® is a registered trademark of Alfa Laval, Inc.

Ideal for low shear applications4 Juice thin down4 Fruit into yogurt4 Flavors & colorants4 Tomato sauces4 Chocolate syrups4 Vitamins

4 Ice cream4 Carbonated beverages4 Create marbelizing4 Creams & lotions4 Fragrance blending4 Jams & jellies

�

Admix.com/Admixer

10 - INLINE MIXING & MILLING

Boston Shearpump®

Inline, High Volume Mixing and Texturizing of Viscous SlurriesThe only shearpump with high throughput & adjustable shear capability

The Boston Shearpump is comparable to other shearpumps with the distinct advantage of substantially higher throughput and moderate to high shear rates, all

provided within a 3-A TPV (#36-01) compliant, easy to clean-in-place design.

The Boston Shearpump is ideal for mixing solids or powders into viscous liquids that typical high shear mixers cannot handle. It is excellent for special mixing requirements

where “texturizing” of high solids is needed, such as refried beans, cream cheese, salsa, processed cheese slices, mashed potatoes, pharmaceutical preps, polymers, detergents,

and more. Where conventional shearpumps are only capable of 30 GPM, the BostonShearpump is available in models for a flow range from 10–150 GPM.

Shearpumps available with coarse, medium, fine, or other special purpose heads

Multiple specific purpose shear heads provide ultimate flexibility. Standard shear head grades include coarse, medium, and fine . Special purpose heads available for texturizing and blending without damaging or altering solids and desired consistency. Model BSP24C standard with 7.5 HP motor, a 2” inlet and outlet, 10–30 GPM flow range, and our exclusive single mechanical quench seal rated for 700 psi . Model 60C standard with a 25 HP motor, a 3” inlet / 2” outlet, 30–150 GPM flow range, and our exclusive single mechanical quench seal rated for 700 psi

�

Boston Shearpump ®

BostonShearpump.com

INLINE MIXING & MILLING - 11

Boston Shearmill™High Intensity Wet Milling, Homogenizing, and Particle ReductionOutperforms inline mixers, conventional shearpumps, and colloid mills

The Boston Shearmill is our ultimate machine for providing high to extreme shear ratesand tip speeds for maximum droplet and particle size reduction. It can mill soft particlesdown to <1 micron, or hard particles down to 1-2 microns, often in just a single pass athigh production rates. The Boston Shearmill often replaces colloid mills andhomogenizers where submicron processing is not necessary.

Existing installations include tomato paste enhancement and standardization, ketchup andmustard production, salad dressings, mayonnaise, pet foods and treats, soups, sauces, flavoremulsions, pharmaceutical preps, polymers and more. All Boston Shearmills are standardwith three sets of shear heads (rotor/stator), and each head has two distinct stages for a totalof six work zones. This increase in residence time between the stages aids in creating tremendousmechanical and hydraulic energy for applying maximum shear forces into the product.

And specifically designed for mayonnaise and salad dressing production, the Admix MayoMill™is built off this innovative technology and balances shear rate and flow to optimize productquality and consistency. See how at admix.com/mayomill.

The best built, heavy-duty, all purpose inline milling machine on the market. Standard shear head grades include coarse, medium, and fine . Special purpose heads available for texturizing and blending without damaging or altering solids and desired consistency

. Models available from 15–75 HP, providing product throughput from 5–165 GPM depending on feed rate and viscosity

. All models feature our exclusive single mechanical quench seal rated for 700 psi, and comply with 3-A TPV (#36-01) standards

Shear head gradesinclude coarse, medium, fine, very fine, and ultra fine

�BostonShearmill.com

Process benefits4 Reduce operator injury4 Improve product quality4 Reduce the risk of accidents4 Increase ingredient functionality4 Reduce mix times4 Fast ingredient addition4 No more wasted ingredients4 Improve yields

Optifeed™ & PIC™ Systems

12 - POWDER CONVEYING & INDUCTION

PIC System

Ergonomic Atmospheric Powder Induction TechnologyDesigned to handle higher viscosities and higher powder feed rates

Admix powder induction systems provide rapid introduction and wetting out ofdry solids and/or liquid ingredients. The Optifeed OES and PIC Systems can process

50–200 pounds/minute of dry or liquid materials depending upon system settings andprocess conditions. An integrated control valve enables system setting adjustments, without

the need for a trained mechanic, allowing processors to take full advantage of the superior suction capabilities of this powder induction technology.

4 Powder induction capacities up to 200 pounds/minute

4 Viscosity capability of 2,500 cps and 78% maximum solids

4 All 304/316SS construction with CIP capability

4 Optional wand attachment available 4 Integrated sanitary clamps, valves and piping 4 Optional NEMA 4X controls for pump 4 Pre-engineered models for quick shipment

OES System

Standard PIC system includes a 3.5 cubic foot

powder hopper, ergonomic waist-high work table, sanitary powder suction pump, powder

valve, vacuum gauge, vacuum regulator valve, control box for pump and interconnecting piping

Standard OES system includes a 3.5 cubic foot powder hopper and modular frame at floor level for easy access to load ingredients

Admix.com/PIC

Admix.com/OES

Fastfeed™

Powder Induction & Dispersion Skid System

High performance ergonomic feeding and dispersion of dry ingredients into mix tanks

The Fastfeed is an integrated, skid-mounted inline powder induction and dispersion system using a specially designed powder suction pump and our DynaShear high shear mixing technology for rapid incorporation and wetting out of difficult powders.

The Fastfeed is unlike any other powder induction system, which typically relies on an eductor, venturi, or negative pressure generated by a high-speed mix head. The Fastfeed uses a high performance suction pump that vacuum conveys 3–450 pounds/minute of any powder orsolid, including hard-to-handle gums, starches andcarbomers. Designed to allow for continuous powdersuction even as the viscosity and solids level increase.

Unmatched versatility . Adjustable powder feed rates with regulating valves . Produce completely dispersed, uniform product in a single pass on most applications . Safely dump powder from floor level . Portable design for easily maneuvering to any mixing area. Standard hopper vibrator prevents bridging of powder . Make any size batch (10–50,000 gallons), simply keep the inlet flooded from the mix tank

POWDER CONVEYING & INDUCTION - 13

Completelydispersed discharge

Inletwater

Powder hopper with vibrator

Single switch forvibrator andpowder valveactuation

Air actuated powder valve

Powder suction pump

DynaShear high shear mixer

Control panelfor suction pumpand DynaShear

Admix.com/Fastfeed

A

B

C

DE

Bag Drum

BagDump

BulkBag

Delivery

Vacuum Wand

ROTOSOLVER®

SiloVacuum Pump

VacuShear®

Vacuum Conveying and Mixing from Bulk Source to Mix StationA fully integrated, full-featured pilot or production scale

liqui-processor combining rapid conveying and blending of powders

. Powder drop tube with isolation valves for subsurface powder addition . All 316SS tank construction, suited for 14.5 psig to full vacuum, all internal welds blended, #4 polish inside, 2B outside and customized for your specific needs . Fully integrated powder source options include bulk bag delivery, bag dump, or vacuum wand for drums and bags . Rotosolver high shear disperser is 3-A TPV (#73-01) compliant for easy CIP and maintenance . Process automation with load cell batching or loss-in-weight controls available upon request

14 - POWDER CONVEYING & INDUCTION

The VacuShear Liqui-processor is specifically designed to convey granular to fine powders at high flow rates into a vacuum-rated, CIP capable mix station. Using Rotosolver dispersion technology combined with a heavy-duty liquid ring vacuum pump, VacuShear delivers powder conveying rates up to 400 pounds/minute and mix station volumes from 20-gallon pilot plant to 1500-gallon production modules.

This unique technology provides the most ergonomic, efficient, and sanitary method of moving large amounts of powder quickly and safely.

Dusting, bag dumping, entrained air, and foaming are all eliminated, while the high intensity mixer provides 100% powder incorporation with no bypass or hang-up within the mix station.

Models and options to fit everyproject and budget

VacuShear.com

FlowShear™

Bottom Mount Dispersers & EmulsifiersHigh shear and high flow in a compact sanitary designThe FlowShear bottom mount disperser & emulsifier offers unrivaled versatility allowing pro-cessors to mix a wide range of batch sizes with minimal starting liquid levels.

The FlowShear’s unique mixing head design provides high shear and superior flow by combining a rotor-stator with an optional impeller utilizing advanced Jetfoil™ technology. This Ultra sanitary machine provides maximum versatility to meet your most demanding processing needs.

Features and benefits

. Allows full shear at volumes as low as 5% of finished tank volume, ideal for low water phases. Self–draining sanitary seals with our exclusive auto seal shut off to prevent premature seal failure. Compact mounting flange with sanitary O-ring design. Designed with minimal protrusion allowing easy addition to scraped surface and counter rotating equipped vessels. Ideal for low water / gum phase creation. Total washdown and CIP capability. Low maintenance design for minimum downtime – no bushings, wear sleeves, shims or bearings to wear out. Optional impellers and stators to meet specific shear and flow requirement

BOTTOM MOUNT DISPERSING & EMULSIFYING - 15

FlowShear advantages4 Low starting liquid level and small batch capability 4 Substantial reduction of air entrainment 4 Reduces the need for secondary agitation 4 Can be combined with scraped surface or counter rotating agitators4 Optimized for high viscosity personal care, pharmaceutical, and food products

FlowShear.com

16 - ACCESSORIES & SERVICES

Lift StandsMobile or Fixed Stands with Pneumatic or Hydraulic Operation

A complete line of lift stands for mounting smaller mixers for mobile tank-to-tank mixing, or wall

mounted for using mobile totes and portable tanks

. Standard mobile lift stands available in two models for versatility in clearing tank height while maintaining proper mix head position, maximum lift height of 100”. Wall stands available in two sizes with a maximum stroke differential of 50”. Instant height adjustment with pneumatic controls mounted on the stand, or manual slower adjustment with a hydraulic cylinder lift. All stands constructed of 304SS or carbon steel with white epoxy washdown paint. Lift cylinders are white epoxy, with paint-free and 304SS alternatives in some sizes. Optional mounting brackets, swivel mounts, controls and materials of construction

Seal TechnologyA Complete Series of Flush, Dry Running, Vacuum, and Gas Seals

. Double mechanical, water flush cartridge seals for 400 psig or full vacuum at 400˚F. Double mechanical, gas charged seals for high purity pharmaceutical applications. Rated for 100 psig and full vacuum at 300˚F. Single mechanical, dry running cartridge seals for 200 psig at 400˚F. Suitable for low speed Rotomixx and RotoMAXX only. Exclusive single mechanical, high pressure quench seal operates up to 700 psi, and allows for over 100 psi back pressure to increase product dwell time. Suitable for Boston Shearpumpand Shearmill. Sanitary clamp mounted lip seals compatible (4” or 6”) to existing ferrules (T or I type). Solid 316SS pedestals for 3-A TPV compliance of 4” spacing of mixer drive and tank

ACCESSORIES & SERVICES - 17

Control DocumentationExtra Capacity and Cleanability Built into Every Detail

. The mechanical integrity of our mixers and components is evident in their oversized shafting, heavy-duty precision fit bearing frames, high efficiency motors, and easy-to-disassemble cartridge-type seals. These all contribute to reduced downtime and maintenance . All mixing equipment and components are put through multiple inspections and a final operational testing program with full documentation supplied upon request. Most products 3-A TPV compliant, ensuring ease in cleaning and servicing. Outstanding corrosion resistance with 316SS standard on most product lines, including motors and bearing frames, which are typically painted steel with our competitors

. Standard systems available from 20-gallon pilot plant through 500-gallon production modules. Turnkey systems include tanks, powder feed hopper, batch or inline mixer, transfer/recirculation pump, and all necessary fittings, valves & piping. All 304/316SS construction with CIP capability throughout. Turnkey systems can be designed for batch or continuous processing, with manual or fully automatic controls

Turnkey Mixing SystemsStandard or Custom SkidsFully integrated mix stations and skids for marinades, salad dressings, beverage premixes and other specific applications to suit your needs

Laboratory & Process SupportYour Process Success Starts Here!

Admix recognizes that product development and process justification are critical to the success of your operation, and we are confident we can provide the resources

you’ll need to solve your toughest mixing challenge and validate your purchase.

Laboratory & Pilot Plant CapabilitiesPre-test and simulate your mixing requirements with free testing and analysis in our 2,500

square foot test laboratory and pilot plant. We invite you to send us samples of your challengingingredients so we can customize a solution based on our lab testing. We also encourage people

to visit our facility for a demonstration of our mixers applied to their process, convenientlylocated just 5 minutes from the Manchester-Boston Regional Airport.

Our lab is completely equipped to test any formula from two liters to 200 gallons, under precise conditions and strictly in confidence to your specifications. We can demonstrate not only our top

entry dispersers and emulsifiers, but also our series of inline high shear mixers and our powder induction and processing equipment.

Comprehensive Scale-Up TechniquesOur scale-up techniques are the most comprehensive in the industry

and performance is guaranteed for in 1-2 liter benchtop testing to full-scale production models. Our technical application engineers will

provide a summary of the expected process characteristics and results for both the lab and full production batches, up front and in writing

before you commit. A video of your test is available upon request.

18 - LAB CAPABILITIES

Analysis instruments available. Malvern particle size analyzer. Brookfield viscometer model RVDV-1+ with helipath stand. Endress+Hauser magnetic flowmeter. Bostwick consistometer. Hegman grind gauge. Accumet pH meter

Customer ServiceEmployee Owned – Customer FocusedAdmix employees bring a unique perspective and attitude to servicing our customers. As a shared ownership company, we know that success is dependent upon your satisfaction when working with us on any inquiry or order. We trust that when you communicate with our employee owners, you sense our enthusiasm and commitment to meet or exceed your expectations.

What is Customer Service at Admix?. A “live” hello when you call. Our substantial inventory allowing for overnight delivery of critical components . Dependable follow-up on every equipment order that ensures you are satisfied with our performance, and that you have received all the documentation, technical guidance and start-up assistance necessary . A responsive website - admix.com - providing 24/7 access to technical, application, and service tips . Our field service team ready to assist with equipment start-up and commissioning. A comprehensive rebuild program that offers a 48-hour turnaround cycle to refurbish your Admix product . Factory-trained experts available to provide in-plant training for your maintenance personnel or equipment and process audits

Admix - Your Mixing Technology PartnerWe appreciate the investment you make in our mixing, milling and powder induction solutions and want to ensure that Admix is a reliable and responsive resource. We pledge that partnering with us will be a positive experience and that our continuous improvement efforts and dedication as employee owners genuinely make a difference.

CUSTOMER SERVICE - 19

The ESOP Association

Admix is a proud member of the ESOP Association and NCEO

Printed in USA APB – 9/16

Your Mixing Technology Partner

.Alginates .Aspartame .Avicel®.Carbopol®.Carrageenan .CMC.Gelatin .Guar gum.Gum arabic.Lecithin .Maltodextrin .Methocel®.Milk, whey & cocoa Powder.Modified food starch.Pectin .Phosphates .Salts .Soy products.Sucralose .Sugars .Syrups .Xanthan gum

.Fisheyes or lumps.Floating powders.Over aerated mixes.Paint chipping from painted mixer drives.Clogging filters and strainers.Unmixed agglomerates.Severe dusting.Long mix times.Inconsistent product quality.Unstable emulsions.Cleaning and sanitation problems.Excessive scrap or rework.High mixer maintenance costs

Get a customized solution at

admix.com/quote

Do these problems affect your operation?

Are you having troublemixing these ingredients?

Here’s how Admix can help.High intensity 1-minute dissolving or dispersing of powders.100% product uniformity.Thorough hydration of gums within minutes - not hours!.Particle size reduction down to 0.5 microns.Drastically reduce dusting and aeration.Pneumatic or mechanical conveying of powders into liquids

Advanced Mixing Technologies

144 Harvey Road Londonderry, NH 03053 USATel: +1 (603) 627-2340Fax: +1 (603) 627-2019E-mail: admixsales@admix.com

Admix Europe ApSSavsvinget 4B2970 Hørsholm, DenmarkTel: +45 (3213) 8743E-mail: europesales@admix.com

1-800-466-2369admix.com