advances in structural engineering-2016-hancock-1369433216630145 [7707]
DESCRIPTION
TWCFS reviewTRANSCRIPT
Seediscussions,stats,andauthorprofilesforthispublicationat:https://www.researchgate.net/publication/295253950
Cold-formedsteelstructures:Researchreview2013-2014
ArticleinAdvancesinStructuralEngineering·February2016
ImpactFactor:0.58·DOI:10.1177/1369433216630145
READS
82
1author:
GregoryJ.Hancock
UniversityofSydney
226PUBLICATIONS3,203CITATIONS
SEEPROFILE
Allin-textreferencesunderlinedinbluearelinkedtopublicationsonResearchGate,
lettingyouaccessandreadthemimmediately.
Availablefrom:GregoryJ.Hancock
Retrievedon:19April2016
Article
Advances in Structural Engineering1–16� The Author(s) 2016Reprints and permissions:sagepub.co.uk/journalsPermissions.navDOI: 10.1177/1369433216630145ase.sagepub.com
Cold-formed steel structures: Researchreview 2013–2014
GJ Hancock
AbstractThis article reviews research on cold-formed steel structures published in 2013 and 2014 in three leading journals: the Journal ofStructural Engineering, ASCE, Thin-Walled Structures and the Journal of Constructional Steel Research. It also reviews papers published in thethree main conferences in the area over the same period. These are Eurosteel 2014 (Naples, Italy), the 7th International Conferenceon Thin-Walled Structures (Busan, Korea) and the 22nd International Specialty Conference on Cold-Formed Steel Structures (StLouis, MO, USA). Three research areas which have recently been incorporated in the North American Specification NAS S100:2012or are being incorporated in the Australian/New Zealand Standard AS/NZS 4600 have been highlighted. These are the works on thesemi-analytical finite strip method for sections in shear by the author and his colleagues at the University of Sydney, net section rup-ture by Associate Professor Lip Teh at the University of Wollongong and fire design by Professor Mahendran at QueenslandUniversity of Technology.
Keywordscold-formed connections, cold-formed steel, cold-formed structures, research review
Introduction
Cold-formed steel (CFS) structures are structures com-posed of structural sections formed by folding at ambi-ent temperature without any heat treatment. They arenormally thin-walled but sections up to 25-mm thickare now being cold-formed from plate and strip. Theusual manufacturing process is by roll forming wherecoil steel passes through a series of rollers which pro-gressively form the desired shape. Traditionally, simplechannels (Cs), zeds (Zs), hat sections and decking havebeen used mainly in roof and wall systems, steel stor-age racks, steel-framed houses (residential) and manyother similar secondary applications. However, thesections are now being used more commonly in pri-mary structures such as portal frames and floor sys-tems. Furthermore, as the sections become thinner inhigher strength steel, more complex shapes are beingcreated with the inclusion of more complex stiffenersboth in the flat elements and at the section lips.
Research into CFS structures has increased consid-erably in recent years. In 2003, the author of this arti-cle published a similar review in the Journal ofConstructional Steel Research (Hancock, 2003) whichcontained 60 publications. This review cites over 200papers over a similar 2-year period 2013–2014 indicat-ing a more than threefold increase in research in thearea. Since the publication of the 2003 paper, there
have been significant developments in CFS designspecifications and standards. The 2007 and 2012 edi-tions of the North American Specification NAS:S100and the 2005 edition of the Australian/New ZealandStandard AS/NZS 4600 included the direct strengthmethod (DSM) of design in addition to the effectivewidth method (EWM). In the same period, EuropeanCommittee for Standardisation published Eurocode 3Part 1.3 for cold-formed members and sheeting. It issubstantially based on the EWM. A recent textexplaining this code with examples has been preparedby Dubina et al. (2013b). The Chinese Technical Codeof Cold-Formed Thin-Walled Steel Structures GB50018 was published in 2002 based on the EWM.
Since 2003, there has been a considerable shift inthe areas of research. Some areas such as section buck-ling including generalised beam theory (GBT), thefinite strip method (FSM) and the constrained finitestrip method (cFSM), the DSM of design, shear walls,fire design, and seismic design have increased
School of Civil Engineering, The University of Sydney, Sydney, NSW,
Australia
Corresponding author:
GJ Hancock, School of Civil Engineering, The University of Sydney,
Sydney, NSW 2006, Australia.
Email: [email protected]
considerably. On the other hand, areas such as corru-gated and curved panels, torsion and distortion(excluding distortional buckling) and enhancedmechanical properties have seen a reduction inresearch. A review of cold-formed stainless steel hasnot been included in this review.
Section buckling and design includingGBT, FSM and DSM
With the advent of the DSM of design based on thebuckling signature curve concept, there has been a sub-stantial increase in research into the different methodsof buckling analysis of thin-walled sections. The twoprincipal methods used are the GBT and the FSM.The finite element method (FEM) can be used, but it isless useful in isolating the separate local, distortionaland overall (flexural/torsional) modes at this time andthe interaction between them. In preparing this review,it has become difficult to separate buckling analysesfrom design. However, papers where investigation ofthe elastic buckling modes are the primary aim of thepaper are classified as buckling, whereas papers wherethe theory or test results are used in design such as theDSM have been classified as design.
Elastic buckling including interaction
The major work in elastic buckling has concentratedon GBT mainly from Professor Camotim and his col-leagues at the Universidade de Lisbon (TUL), thecFSM both from Professor Schafer and his colleagues
at Johns Hopkins University and Professor Adany andhis colleagues at Budapest University of Technologyand Economics and the FSM for shear buckling at theUniversity of Sydney (Pham and Hancock). Otherresearchers in the area are also cited.
Papers published using GBT (Basaglia et al., 2013,2014b; Bebiano et al., 2014; De Miranda et al., 2013;Taig et al., 2014) cover the areas of continuous purlins,distortional postbuckling, inclusion of extension andshear modes and the new GBTUL-2.0 software. Paperspublished using the cFSM (Adany, 2013, 2014; Adanyand Schafer, 2014a, 2014b, 2014c; Li et al., 2014e)include generalisation to arbitrary cross-sections andextension to the FEM. Alternative methods (Becqueand Li, 2014; Karakonstantis and Becque, 2014) formodal decomposition have recently been developedbased on polarisation. Further work on including per-forations in the FSM has been performed by Smithand Moen (2014).
Recent developments in the FSM include shear andlocalised loading (Hancock and Pham, 2013, 2014a,2014b; Pham and Hancock, 2013b). A new develop-ment in these latter papers is the ‘shear signature curve’as shown in Figure 1(b) for sections in pure shear asshown in Figure 1(a).
The curve semi-analytical finite strip method(SAFSM; program bfinst7.cpp) is the buckling stressversus half-wavelength ‘signature curve’ of a lippedchannel in pure shear with unrestrained end sections,and the curve labelled reSAFSM (program bfinst8.cpp)is the elastic buckling curve versus length for a sectionrestrained with simply supported ends so that it is
Figure 1. Lipped channel section in shear: (a) shear flow distribution and (b) shear buckling curves (Hancock and Pham, 2013).
2 Advances in Structural Engineering
prevented from cross-sectional deformation at its ends.A shear buckling mode at a half-wavelength of200 mm from the SAFSM is shown in Figure 2(a) andat with simply supported ends at a fixed length of200 mm from reSAFSM is shown in Figure 2(b).When the reSAFSM model length is increased to1000 mm, then the buckling mode shown in Figure 3with multiple half-wavelengths results. In this case, theend conditions become less important so that the buck-ling stress is close to the value for the unrestrained sin-gle half-wavelength in Figure 2(a) as can be observedfrom the stresses in Figure 1(b) by comparing thereSAFSM curve at 1000 mm with the SAFSM at200 mm.
Considerable research has been undertaken in thearea of mode interaction between local, distortionaland/or flexural/flexural–torsional or combinations ofthese (Dinis et al., 2014a; Dubina et al., 2013a;
Loughlan and Yidris, 2014; Martins et al., 2014a,2014b; Rizzi et al., 2013; Santos et al., 2014;Ungermann et al., 2014). Based on this research, thereis a need to review some of the design rules in existingstandards and specifications to further account for theinteractions.
DSM and other design methods
The DSM has been further investigated in detail forcompression members, flexural members, combinedbending and compression, members in shear and theinteraction between the modes. The references are forcolumn design (De Miranda et al., 2014; He et al.,2014; He and Zhou, 2014; Landesmann and Camotim,2013; Young et al., 2013), for beam/purlin design(Basaglia and Camotim, 2013; Basaglia et al., 2014a;Gao and Moen, 2014; Keerthan and Mahendran,2014a; Kumar and Kalyanaraman, 2014; Pham andHancock, 2013a), for shear design (Pham et al., 2014a,2014b, 2014d; Pham and Hancock, 2014) and forstructural systems (Camotim and Basaglia, 2014). Asfor buckling, there is a need to review some of thedesign rules in existing standards and specifications tofurther account for interaction. A rig for measuringand classifying global, distortional and local imperfec-tions in cold-formed members is described by Zhaoand Schafer (2014).
Compression members including wallstuds
Considerable work has taken place in the area of com-pression members including angles, sections with per-forations and holes, sections built-up from single
Figure 2. Lipped channel buckling modes in pure shear (200 mm) (Hancock and Pham, 2013): (a) unrestrained buckling mode(SAFSM) and (b) restrained buckling mode (reSAFSM).
Figure 3. Simply supported lipped channel shear bucklingmode at L = 1000 mm (reSAFSM) (Hancock and Pham, 2013).
Hancock 3
members, wall stud member with sheathing attachedand eccentric loading (beam–columns). The referencesare for angles (Shifferaw and Schafer, 2014; Silvestreet al., 2013), members with dimples and other indenta-tions, perforations and holes (Ekmekyapar et al., 2014;Kubde and Sangle, 2014; Kulatunga et al., 2014;Kulatunga and Macdonald, 2013, 2014; Macdonaldand Kulatunga, 2014; Nguyen et al., 2014; Xu et al.,2014), Carbon Fiber Reinforced Plastic (CFRP)strengthening (Kalavagunta et al., 2013), for membersbuilt-up from channel sections (Crisan et al., 2014a;Dabaon et al., 2014; Fratamico and Schafer, 2014; Liet al., 2014b; Piyawat et al., 2013; Selvaraj andMadhavan, 2014; Ting and Lau, 2014a, 2014b), forfixed-ended columns (Dinis et al., 2014c; Gunalan andMahendran, 2013b), for sheathed members (Petermanand Schafer, 2014) and for members in combinedbending and compression (Li et al., 2014a; Torabianet al., 2014). Clearly, the most recent research isdirected away from unperforated and single membersto more complex arrangements including perforatedmembers.
Flexural members including purlins,sheeting and decking
Research into flexural members is wide ranging frompurlins with sleeves and different types of sheetingrestraint, novel shapes and sections including corru-gated and stiffened webs, shear including shear withholes, flexure with holes, web crippling, compositefloors including Oriented Strand Board (OSB), andsheeting and decking. The references are for purlinsand beams (Gelji et al., 2014; Georgescu andUngureanu, 2014; Gutierrez et al., 2013; Kujawa andSzymczak, 2014; Loureiro and Calvo, 2014; Moenet al., 2013; Pham et al., 2014c; Seek, 2014; Uzzamanet al., 2014; Ye et al., 2013), novel shapes includingstiffened and corrugated webs (Dubina et al., 2014;Dubina and Ungureanu, 2014; Laım et al., 2013,2014a; qukowicz and Urbanska-Galewska, 2014;Paczos, 2014; Siahaan et al., 2014a, 2014b; Tondiniand Morbioli, 2014; Wang et al., 2014c; Wang andYoung, 2014a, 2014b, 2014c), combined bending andcompression (Cheng et al., 2013), shear including com-bined bending and shear (Acharya et al., 2013;Bruneau et al., 2014; Keerthan et al., 2014a; Keerthanand Mahendran, 2013a, 2013b, 2013c, 2014b, 2014c),web crippling (Gunalan and Mahendran, 2014c;Keerthan et al., 2014b; Keerthan and Mahendran,2014a, 2014d; Natario et al., 2014a, 2014b; Uzzamanet al., 2013), composite floors including OSB board(Chatterjee et al., 2014b; Zhou et al., 2014) and sheet-ing and decking (Adany et al., 2013; Casariego et al.,
2014; Danilov and Tusnina, 2014; Guo et al., 2014;Lawson and Popo-Ola, 2013). The influence of sheet-ing, decking, sandwich panels and OSB board on flex-ural member behaviour including both purlins andfloors is being further investigated in detail to improvereliability and performance.
Connections and fasteners
Research into connections has focussed on five areas.These are bolted connections which include the major-ity of the papers, clinching, screwed connections, fas-tener reliability and moment connections. Thereferences are for bolted connections including sectionrupture and bearing failure (Bolandim et al., 2013;Clements and Teh, 2013; Liu et al., 2014; Teh andGilbert, 2013a, 2013b, 2014a, 2014b; Yu andPanyanouvong, 2013; Yu and Xu, 2013), clinching andpinned connections (Di Ilio, 2014; Lambiase and DiIlio, 2014; Mathieson et al., 2014; Mucha andWitkowski, 2014), screwed connections (Moen et al.,2014; Sivapathasundaram and Mahendran, 2014), fas-tener reliability (Chatterjee et al., 2014a) and momentconnections (Bucmys et al., 2014; Lim et al., 2014;Sabbagh et al., 2013). The design of bolted connectionsin net section rupture has had the most investigationand is being incorporated in the NAS S100 and AS/NZS 4600 standards. However, less research on con-nections seems to be being undertaken than in thepast.
Net section tension rupture is probably the mostfamiliar failure mode of bolted connections to bothengineers and non-engineers. Examples of this failuremode in a flat sheet and in a channel section, both ofwhich are composed of cold-reduced sheet steel, areshown in Figure 4. The net section tension capacity ofsuch a bolted connection may be reduced by the exis-tence of shear lag, relative to bolted connections inmore ductile steel members.
Figure 4. Net section tension rupture in a flat sheet and achannel section.
4 Advances in Structural Engineering
Attempts to account for the shear lag effect in flatmembers by the major CFS design specificationsworldwide have led to anomalies (Teh and Gilbert,2014a), which persisted despite various amendmentsover the past several decades. For a bolted connectionwhere the bolt spacing is at least twice the bolt dia-meter, all the prevailing code equations predict the netsection tension capacity to increase with decreasing netsection area. This anomaly was recently resolved viathe use of calculus, and a new equation (Teh andGilbert, 2014a) that avoids the known anomalies hasbeen adopted into the 2016 edition of the NorthAmerican Specification for the Design of Cold-FormedSteel Structural Members.
Comparisons between the in-plane shear lag factorsgiven by the prevailing design standards and the newequation for a bolted connection in a flat brace can bemade in Figure 5. The variable d denotes the bolt dia-meter, and W is the bolt spacing in the direction per-pendicular to loading, or, for a single boltedconnection, the connected member width.
Bolandim et al. (2013) found that the net sectiontension rupture provisions in NAS S100:2012 forbolted connections in angle and channel braces led toreliability indices much lower than the target index of3.5. Based on reliability analyses, they calculated therequired resistance factors to be as low as 0.30 for thespecification’s design equations.
Teh and Gilbert (2013b) considered the three fac-tors affecting the net section efficiency of a channelbrace bolted at the web, namely the in-plane shear lag,the out-of-plane shear lag and the interaction betweenthe detrimental moment due to connection eccentricityand the counteracting moment provided by the boltedconnection. They proposed a design equation that hassince been shown to provide reasonable estimates forchannel braces composed of G450 and SSC400 sheetsteels having various aspect ratios and bolting config-urations (Teh and Gilbert, 2014a). This equation willbe adopted into the 2016 edition of the NorthAmerican Specification for the Design of Cold-Formed Steel Structural Members NAS S100.
Comparisons between the net section efficiencies oftypical channel braces bolted at the web given by theunderlying equation in NAS S100:2012 and the newequation to be used in NAS S100:2016 can be seen inTable 1. The results of a regression analysis equationderived by the Center for Cold-Formed SteelStructures (CCFSS) at the University of Missouri arealso shown in the table. The variable Ww is the overallweb depth, Wf is the clear flange width, t is the wallsheet thickness, �x is the connection eccentricity and Lis the connection length.
For angle braces bolted at one leg, Teh and Gilbert(2014b) proposed a design equation which will beadopted into the 2016 edition of the North AmericanSpecification for the Design of Cold-Formed SteelStructural Members NAS S100. It has a similar formto that proposed by Teh and Gilbert (2013b) for chan-nel braces bolted at the web.
Figure 5. Shear lag factors for bolted connections in flatsheets.
Table 1. Net section efficiencies of channel braces bolted at the web.
Ww
(mm)Wf
(mm)t(mm)
�x(mm)
L(mm)
1 – 0.36 �x=L(NAS S100:2012)
1
1:1+Wf
Ww + 2Wf+ �x
L
(Teh and Gilbert, 2013b)
2:39t
Ww +�x+ 0:308
� ��xL
� ��0:301
(CCFSS)
50 20 1.9 4.34 36 0.96 0.69 0.7450 30 1.9 8.15 36 0.92 0.63 0.6075 25 1.9 4.90 36 0.95 0.70 0.6675 25 1.9 4.90 48 0.96 0.71 0.7375 40 1.9 10.3 48 0.92 0.64 0.5775 40 1.9 10.3 60 0.95 0.65 0.61125 40 2.4 7.64 60 0.95 0.70 0.65125 50 2.4 11.0 60 0.93 0.66 0.58
Hancock 5
Shear walls
There has been a significant increase in research intosteel-framed clad walls, both in shear and compres-sion. Investigations of both seismic and dynamic beha-viour have become prominent. The references are forclad shear walls in compression (Vieira and Schafer,2013), blast load (Bondok et al., 2013), static shear(Baldassino et al., 2014; Hernandez-Castillo et al.,2014; Shakibanasab et al., 2014; Tian et al., 2013;Yanagi and Yu, 2014) and seismic/dynamic shear(Baldassino et al., 2014; Balh et al., 2014; Bian et al.,2014; Buonopane et al., 2014; Iuorio et al., 2014a,2014b; Javaheri-Tafti et al., 2014; Lin et al., 2014;Macillo et al., 2014; Shahi et al., 2014; Shamim andRogers, 2013; Shimizu et al., 2013; Vigh et al., 2013;Yu et al., 2014). It is clear that clad and braced shearwalls are useful for resisting seismic shear loads onCFS frames.
Storage racks
The vast majority of storage racks are constructedfrom CFS so that much of the research in the area ofthe stability of steel framing is covered by storageracks. The references are for rack uprights includingbuckling (Bernuzzi and Maxenti, 2014; Casafont et al.,2014; Crisan et al., 2014b; Dinis et al., 2014b; Nedelcuet al., 2014; Ren and Zhao, 2014; Trouncer andRasmussen, 2014), analysis of frames (Gilbert et al.,2014; Rasmussen and Gilbert, 2013) and connections(Wang et al., 2014d; Zhao et al., 2014). Interactionbuckling in the uprights of storage rack frames isclearly an active area of investigation.
Fire design
Fire design research has become more prominent inrecent years especially as more CFS is used in residen-tial construction. Fire design rules in EC3 Part 1.2(EN 1993-1-2, 2005) are considered to be applicable toCFS members within the scope of EC3 Part 1.3 (EN1993-1-3, 2006). However, they were specifically devel-oped for hot-rolled steel structures, and despite somespecial provisions given in Annex E of EC3 Part 1.2for thin-walled sections, past studies have demon-strated the need for specific research on CFS membersexposed to fire conditions in order to develop suitablefire design rules. CFS members are not always sub-jected to a uniform temperature exposure. For exam-ple, CFS wall and floor systems are often protected byfire-resistant gypsum plasterboards (Figure 6), andhence, their lipped channel members (studs and joists)will be subjected to a non-uniform temperature distri-bution when exposed to fire on one side (Figure 7).
The simplified method in EC3 Part 1.2 (EN 1993-1-2, 2005) requires that the design action effects in adesign fire is less than or equal to the correspondingdesign capacity of the steel members at any given timeduring the design fire, that is, subject to a particularnon-uniform or uniform elevated temperature expo-sure. This design approach requires thermal perfor-mance evaluation of members to determine theirtemperature at any given time during the design fire(Figure 7), a good understanding of the behaviour andreduced capacities of CFS steel members (columns andbeams) subject to various buckling modes such aslocal, distortional and flexural and flexural–torsionalat elevated temperatures (Figure 8) as well as thereduced mechanical properties of CFSs at elevatedtemperatures (Figure 9). Fire research on CFS mem-bers has been addressing the above issues so thatimproved fire design rules can be developed. Mostresearch was aimed at using the ambient temperaturedesign rules with appropriately modified elevated tem-perature mechanical properties of CFSs.
During 2013–2014, Gunalan et al. (2013) andGunalan and Mahendran (2013a) extended the fireresearch on CFS members at the QueenslandUniversity of Technology to CFS wall systems usingboth full-scale fire tests and finite element analyses topredict their structural and thermal performances instandard fire conditions and developed suitable fire
Figure 6. CFS wall system.
Figure 7. Non-uniform temperature distribution in wall studs.
6 Advances in Structural Engineering
design rules within the Australian, North Americanand European CFS design provisions. These designrules can be used to predict the capacity of wall studsin fire and the associated fire resistance ratings of wallsystems. Ariyanayagam and Mahendran (2014)expanded this research to include CFS wall systemsexposed to more realistic fire time–temperature curvesincluding those based on parametric fires given in EC3Part 1.2. Professor Y.C. Wang from the University ofManchester continued his work on CFS wall systemsto develop a simple method to determine the non-uniform temperature distributions in the wall stud sec-tions exposed to fire on one side without the need touse finite element simulations (Shahbazian and Wang,2013). Shahbazian and Wang (2014) then proposed afire design method for CFS walls exposed to para-metric fires. In this design method, their simple tem-perature distribution prediction method is first used todetermine the wall stud temperatures in a given para-metric fire, and their DSM-based design rules are then
used to calculate the capacity of wall studs subject tolocal, distortional or global buckling effects, whichprovide the required ultimate load of wall studs versustime in such parametric fires.
Chen et al. (2013) and Chen and Ye (2014) con-ducted full-scale fire tests of CFS walls made of differ-
ent configurations and confirmed Gunalan et al.’s
(2013) findings that the use of external insulation
instead of cavity insulation improved the fire perfor-
mance of walls. Chen et al. (2013) investigated the
effects of using different fire protection boards, based
on which suitable recommendations were made to
improve the fire performance.Research on individual CFS columns and beams
was also continued during 2013–2014. Craveiro et al.
(2014) conducted fire tests of lipped channel and built-
up channel columns with restrained thermal elongation
to investigate the effects of cross-section, end support
conditions, surrounding structure stiffness and applied
load level. Their results identified the critical para-
meters that reduced the critical temperature signifi-
cantly. Laım et al. (2014b) conducted a similar study
for CFS lipped channel and built-up channel beams to
investigate the effects of four different profiles, axial
restraint to thermal elongation and rotational stiffness
of beam supports on the failure modes, temperatures
and times. Their tests showed that any axial restraint
to thermal elongation was detrimental to fire perfor-
mance while the use of closed built-up profiles
improved the fire performance. Cheng et al. (2014)
investigated the fire performance of CFS members
under axial and transverse loading while Gunalan
et al. (2014) investigated the flexural–torsional buck-
ling behaviour of CFS columns using uniform elevated
temperature tests and finite element analyses to
develop suitable fire design rules, which showed their
adequacy when appropriately reduced mechanical
properties were used.Local buckling effects of CFS members at elevated
temperatures are currently accounted for using the
conventional EWM with elevated temperature yield
strength based on 0.2% proof strength. Couto et al.
(2014) used a numerical study to investigate the accu-
racy of this approach and proposed modified effective
width expressions for internal and outstand elements
of CFS profiles exposed to uniform elevated tempera-
tures. Many research studies mentioned above used
nonlinear 3D finite element analyses to study the fire
performance of CFS members and to investigate the
accuracy of elevated temperature design rules.
Ellobody (2013) presents more details of this approach
and the main parameters to be considered for the heat
transfer and structural analyses of CFS columns in fire
conditions.
Figure 8. CFS member and wall failures in fire.
Figure 9. Elevated temperature mechanical properties of CFS(Dolamune Kankanamge and Mahendran, 2011).
Hancock 7
Limited work has been undertaken on CFS connec-tions in fire. Yan and Young (2013) address this issuethrough a detailed experimental study of double shearbolted connections of thin steels exposed to uniformelevated temperatures. They showed that the use ofambient temperature design equations for connectionstrengths provided conservative predictions when ele-vated temperature mechanical properties were used.
Assessing the residual strength of CFS structuresfollowing a fire event is important and thus Gunalanand Mahendran (2014a, 2014b) investigated the post-fire mechanical properties of CFSs and proposed suit-able predictive equations for this purpose.
Fire research on CFS members, connections andstructural systems is continuing, which will lead toaccurate design methods to predict their structural fireperformance for inclusion in future design standards.
Seismic design
As CFS structures are used in more active seismicareas, there is an increasing need to carry out researchon cold-formed members and structural systems sub-ject to cyclic loading. Shear walls under cyclic load arealready covered in section ‘Shear walls’. The referencesare for moment frames (Bai and Lin, 2013; Li et al.,2014d), strap-braced frames (Dao and Van de Lindt,2013; Pali et al., 2014; Terracciano et al., 2014), mid-rise construction (Ozaki et al., 2013; Yuan and Xu,2014) and framing members (Padilla-Llano et al.,2014a, 2014b, 2014c). It is interesting to see increasingresearch on mid-rise and moment-resisting frames.
Frames
Portal frames composed entirely of cold-formed mem-bers are being used frequently and so more researchon their structural behaviour is being undertaken. Thereferences are for residential and framed buildings (Liet al., 2013, 2014c; Peterman et al., 2014), moment andportal frames (Hanna, 2014; Zhang and Rasmussen,2014) and stressed skin action (Phan et al., 2014a,2014b; Wrzesien et al., 2014). A significant new area ofresearch is clad framed and residential buildings andthe effect of the cladding on the frame behaviour espe-cially during seismic action.
Optimisation
Research into section shape optimisation has been car-ried out for a long time and continues as new algo-rithms are developed. The references are Ostwald andRodak (2013), Moharrami et al. (2014), Franco et al.
(2014), Leng et al. (2014) and Wang et al. (2014a,2014b).
Conclusion
This article provides a bibliographical review of paperspublished in the area of CFS structures in the Journalof Structural Engineering, ASCE; Thin-WalledStructures; Journal of Constructional Steel Research;Eurosteel 2014 Conference, Naples; 7th InternationalConference in Thin-Walled Structures, Busan, Korea,2014; and the 22nd International Specialty Conferenceon Cold-Formed Steel Design and Construction, StLouis, MO, USA, 2014. The notable feature of thisarticle is the threefold increase in the number of papersbetween a similar review in 2003 and this review from60 to over 200. The highlight in the period has beenthe inclusion of the DSM of design in the NorthAmerican Specification NAS:S100 and the Australian/New Zealand Standard AS/NZS 4600. This has led toa significant increase in stability research using theGBT and the FSM including mode interaction. Twoother areas with a major increase in research are firedesign and shear walls particularly under seismic load.There is an increased need to incorporate much of thisresearch into new design specifications and standards.At the time of writing, new editions of NAS:S100 andAS/NZS 4600 are under preparation using much ofthis research.
The author has noted several areas that need furtherresearch during this review. These are the inclusion oflocalised loading/web crippling in the DSM of designso that all modes of failure are covered, more studieson structural systems and system effects including thenewly developing method of modular construction,more research on the use of advanced analysis methodsfor frames and further investigation of seismic designof systems as opposed to simply shear walls.
Acknowledgements
The author is grateful for the material provided byProfessor Mahendran (QUT) and Associate Professor LipTeh (UOW).
Declaration of Conflicting Interests
The author(s) declared no potential conflicts of interest withrespect to the research, authorship and/or publication of thisarticle.
Funding
The author(s) received no financial support for the research,authorship and/or publication of this article.
8 Advances in Structural Engineering
References
Acharya SR, Sivakumaran KS and Young B (2013) Reinfor-
cement schemes for cold-formed steel joists with a large
web opening in shear zone – an experimental investiga-
tion. Thin-Walled Structures 72: 28–36.Adany S (2013) Decomposition of in-plane shear in thin-
walled members. Thin-Walled Structures 73: 27–38.Adany S (2014) Constrained finite element method: demon-
strative examples on the global modes of thin-walled
members. In: 22nd international specialty conference on
cold-formed steel design and construction, St Louis, MO,
5–6 November, pp. 67–82. Rolla, MO: Missouri Univer-
sity of Science and Technology.Adany S and Schafer BW (2014a) Generalized constrained
finite strip method for thin-walled members with arbitrary
cross-section: primary modes. Thin-Walled Structures 84:
150–169.Adany S and Schafer BW (2014b) Generalized constrained
finite strip method for thin-walled members with arbitrary
cross-section: secondary modes, orthogonality, examples.
Thin-Walled Structures 84: 123–133.Adany S and Schafer BW (2014c) Modal decomposition for
thin-walled column and beam members with arbitrary
cross-sections. In: European conference on steel and com-
posite structures, Eurosteel, 10–12 September, Naples.Adany S, Kachichian M, Kovesdi M, et al. (2013) Experi-
mental studies on deep trapezoidal sheeting with perfo-
rated webs. Journal of Structural Engineering 139(5):
729–739.Ariyanayagam AD and Mahendran M (2014) Numerical
modelling of load bearing light gauge steel frame wall sys-
tems exposed to realistic design fires. Thin-Walled Struc-
tures 78: 148–170.Bai Y and Lin X (2013) Numerical simulation on seismic col-
lapse of thin-walled steel moment frames considering post
local buckling behavior. Thin-Walled Structures 62:
424–434.Baldassino N, Accorti M, Zandonini R, et al. (2014) Lateral
loading response of CFS framed shear wall with cement
board panels. In: 22nd international specialty conference
on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 793–808. Rolla, MO: Missouri
University of Science and Technology.Balh N, DaBreo J, Ong-Tone C, et al. (2014) Design of steel
sheathed cold-formed steel framed shear walls. Thin-
Walled Structures 75: 76–86.Basaglia C and Camotim D (2013) Buckling, postbuckling,
strength, and DSM design of cold-formed steel continu-
ous lipped channel beams. Journal of Structural Engineer-
ing 139(5): 657–668.Basaglia C, Camotim D and Coda H (2014a) Behaviour, fail-
ure and DSM design of cold-formed steel beams: influence
of the load point of application. Thin-Walled Structures
81: 78–88.Basaglia C, Camotim D, Goncxalves R, et al. (2013) GBT-
based assessment of the buckling behaviour of cold-
formed steel purlins restrained by sheeting. Thin-Walled
Structures 72: 217–229.
Basaglia C, Landesmann A and Camotim D (2014b) Distor-
tional post-buckling strength of CFS columns GBT-based
assessment of the cross-section geometry influence. In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Bebiano R, Camotim D and Goncalves R (2014) GBTUL
2.0 – a new/improved version of the GBT-based code for
the buckling analysis of cold-formed steel members. In:
22nd international specialty conference on cold-formed steel
design and construction, St Louis, MO, 5–6 November,
pp. 1–20. Rolla, MO: Missouri University of Science and
Technology.Becque J and Li X (2014) The polarisation method for modal
decomposition of buckled shapes. In: 7th international
conference on thin-walled structures, Busan, Korea, 28 Sep-
tember–2 October (ICTWS2014-S0701).Bernuzzi C and Maxenti F (2014) European alternatives to
design perforated thin-walled cold-formed beam–columns
for steel storage systems. Journal of Constructional Steel
Research 101: 121–136.Bian G, Buonopane SG, Ngo HH, et al. (2014) Fastener-
based computational models with application to cold-
formed steel walls. In: 22nd international specialty confer-
ence on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 825–840. Rolla, MO: Missouri
University of Science and Technology.Bolandim EA, Beck AT and Malite M (2013) Bolted connec-
tions in cold-formed steel: reliability analysis for rupture
in net section. Journal of Structural Engineering 139(5):
748–756.Bondok D, Salim H, Saucier A, et al. (2013) Static resistance
function of cold-formed steel stud walls. Thin-Walled
Structures 62: 177–187.Bruneau LA, Pham CH and Hancock GJ (2014) Experimen-
tal study of longitudinally stiffened web channels sub-
jected predominantly to shear. In: 22nd international
specialty conference on cold-formed steel design and con-
struction, St Louis, MO, November, 5–6 November, pp.
329–344. Rolla, MO: Missouri University of Science and
Technology.Bucmys Z, Dani�unas A and Rasiulis K (2014) Investigation
of cold formed steel connections: experimental and
numerical analysis of beam to column gusset plate con-
nections. In: European conference on steel and composite
structures, Eurosteel, 10–12 September, Naples.Buonopane SG, Bian G, Tun TH, et al. (2014) Computation-
ally efficient fastener-based models of cold-formed steel
shear walls with wood sheathing. Journal of Construc-
tional Steel Research 101: 137–148.Camotim D and Basaglia C (2014) On the behaviour, failure
and direct strength design of thin-walled steel structural
systems. Thin-Walled Structures 81: 50–66.Casafont M, Pastor MM, Roure F, et al. (2014) Design
of steel storage rack columns via the direct strength
method. Journal of Structural Engineering 139(5):
669–679.Casariego P, Casafont M, Ferrer M, et al. (2014) Experimen-
tal tests on trapezoidal steel sheeting – an investigation on
Hancock 9
the effect of transverse corrugations. In: European confer-
ence on steel and composite structures, Eurosteel, 10–12
September, Naples.Chatterjee A, Moen CD, Arwade SR, et al. (2014b) System-
reliability sensitivity to fastener capacity in cold-formed
steel wood-sheathed floor diaphragms. In: European con-
ference on steel and composite structures, Eurosteel, 10–12
September, Naples.Chatterjee A, Xiang Y, Moen CD, et al. (2014) Towards
quantifying beneficial system effects in cold-formed steel
wood-sheathed floor diaphragms. In: 22nd international
specialty conference on cold-formed steel design and con-
struction, St Louis, MO, 5–6 November, pp. 903–918.
Rolla, MO: Missouri University of Science and
Technology.Chen W and Ye J (2014) Fire resistance prediction of load
bearing cold-formed steel walls lined with gypsum compo-
site panels. In: 22nd international specialty conference on
cold-formed steel design and construction, St Louis, MO,
5–6 November, pp. 541–556. Rolla, MO: Missouri Uni-
versity of Science and Technology.Chen W, Ye J, Bai Y, et al. (2013) Improved fire resistant
performance of load bearing cold-formed steel interior
and exterior wall systems. Thin-Walled Structures 73:
145–157.Cheng S, Kim B and Li LY (2013) Lateral–torsional buck-
ling of cold-formed channel sections subject to combined
compression and bending. Journal of Constructional Steel
Research 80: 174–180.Cheng S, Kim B and Li LY (2014) Fire performance of cold-
formed steel members: buckling behaviour of channel sec-
tions under axial and transverse uniform loading. In: Eur-
opean conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Clements DDA and Teh LH (2013) Active shear planes of
bolted connections failing in block shear. Journal of Struc-
tural Engineering 139(3): 320–327.Couto C, Real PV, Lopes N, et al. (2014) Effective width
method to account for the local buckling of steel thin plates at
elevated temperatures. Thin-Walled Structures 84: 134–149.Craveiro HD, Rodrigues JPC and Laım L (2014) Cold-
formed steel columns made with open cross-sections sub-
jected to fire. Thin-Walled Structures 85: 1–14.Crisan A, Ungureanu V and Dubina D (2014a) Calibration
of design formula for buckling strength of built-up back-
to-back cold-formed steel members in compression. In: 7th
international conference on thin-walled structures, Busan,
Korea, 28 September–2 October (ICTWS2014-0201).Crisan A, Ungureanu V and Dubina D (2014b) Influence of
web members on the in-plane and out-of-plane capacities
of steel storage upright frames. Thin-Walled Structures 81:
175–184.Dabaon M, Ellobody E and Ramzy K (2014) Nonlinear
behaviour of built-up cold-formed steel section battened
columns. Journal of Constructional Steel Research 101:
16–28.Danilov A and Tusnina O (2014) A comparative analysis of
roofings made of sandwich panels. In: European
conference on steel and composite structures, Eurosteel,
10–12 September, Naples.Dao TN and Van de Lindt JW (2013) Seismic performance
of an innovative light-frame cold-formed steel frame for
midrise construction. Journal of Structural Engineering
139(5): 837–848.De Miranda S, Gutierrez A, Miletta R, et al. (2013) A gener-
alized beam theory with shear deformation. Thin-Walled
Structures 66: 88–100.De Miranda S, Melchionda D, Miletta R, et al. (2014) Design
of thin-walled members undergoing distortional buckling:
a simple EC3-compliant approach based on the GBT. In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Di Ilio A (2014) An experimental study on clinched joints
realized with different dies. Thin-Walled Structures 85:
71–80.Dinis PB, Young B and Camotim D (2014a) L-D-G interac-
tion in CFS lipped channel columns: experimental results,
numerical simulations and design considerations. In: Eur-
opean conference on steel and composite structures, Euro-
steel, 10–12 September, Naples.
Dinis PB, Young B and Camotim D (2014b) Local–distor-
tional interaction in cold-formed steel rack-section col-
umns. Thin-Walled Structures 81: 185–194.Dinis PB, Young B and Camotim D (2014c) Strength, inter-
active failure and design of web-stiffened lipped channel
columns exhibiting distortional buckling. Thin-Walled
Structures 81: 195–209.Dolamune Kankanamge N and Mahendran M (2011)
Mechanical properties of cold-formed steels at elevated
temperatures. Thin-Walled Structures 49(1): 26–44.Dubina D and Ungureanu V (2014) Cold-formed steel beams
of corrugated web: influence of lateral restraining and
economic considerations. In: 7th international conference
on thin-walled structures, Busan, Korea, 28 September–2
October(ICTWS2014-0210).Dubina D, Ungureanu V and Crisan A (2013a)
Experimental evidence of erosion of critical load in inter-
active buckling. Journal of Structural Engineering 139(5):
705–716.Dubina D, Ungureanu V and Gılia L (2014) Cold-formed
steel beams of corrugated web and built-up section
chords. European conference on steel and composite struc-
tures, Eurosteel, 10–12 September, Naples.Dubina D, Ungureanu V and Landolfo R (2013b) Design of
Cold-formed Steel Structures. Brussels, Belgium: ECCS
and Ernst & Sohn (674 pp.).Ekmekyapar T, Gogus MT and Ozaka M (2014) Tailoring
compression performance of cold-formed steel columns.
In: 22nd international specialty conference on cold-formed
steel design and construction, St Louis, MO, 5–6 Novem-
ber, pp. 143–156. Rolla, MO: Missouri University of Sci-
ence and Technology.Ellobody E (2013) A consistent nonlinear approach for ana-
lysing steel, cold-formed steel, stainless steel and compo-
site columns at ambient and fire conditions. Thin-Walled
Structures 66: 168–187.
10 Advances in Structural Engineering
EN 1993-1-2 (2005) Eurocode 3: Design of Steel Structures.
Part 1.2: general Rules – Structural Fire Design. Brussels:
European Committee for Standardization.EN 1993-1-3 (2006) Eurocode 3: Design of Steel Structures.
Part 1.3: General Rules – Supplementary Rules for Cold-
formed Members and Sheeting. Brussels: European Com-
mittee for Standardization.Franco JMS, Duarte JS, de Miranda Batista E, et al. (2014)
Shape grammar of steel cold-formed sections based on
manufacturing rules. Thin-Walled Structures 79: 218–232.Fratamico DC and Schafer BW (2014) Numerical studies on
the composite action and buckling behavior of built-up
cold-formed steel columns. In: 22nd international specialty
conference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 213–228. Rolla, MO: Mis-
souri University of Science and Technology.Gao T and Moen CD (2013) Extending the direct strength
method for cold-formed steel design to through-fastened
simple span girts and purlins with laterally unbraced com-
pression flanges. Journal of Structural Engineering 140(6):
04014010.Gelji B, Szedlak M, Visy D, et al. (2014) Understanding the
global buckling behavior of thin-walled members with
slotted web. In: 22nd international specialty conference on
cold-formed steel design and construction, St Louis, MO,
5–6 November, pp. 51–66. Rolla, MO: Missouri Univer-
sity of Science and Technology.Georgescu M and Ungureanu V (2014) Stabilisation of con-
tinuous Z-purlins by sandwich panels: full scale experi-
mental approach. Thin-Walled Structures 81: 242–249.Gilbert BP, Teh LH, Badet RX, et al. (2014) Influence of pal-
lets on the behaviour and design of steel drive-in racks.
Journal of Constructional Steel Research 97: 10–23.Gunalan S and Mahendran M (2013a) Development of
improved fire design rules for cold-formed steel wall sys-
tems. Journal of Constructional Steel Research 88: 339–362.Gunalan S and Mahendran M (2013b) Improved design rules
for fixed ended cold-formed steel columns subject to flexural–
torsional buckling. Thin-Walled Structures 73: 1–17.Gunalan S and Mahendran M (2014a) Experimental investi-
gation of post-fire mechanical properties of cold-formed
steels. Thin-Walled Structures 84: 241–254.Gunalan S and Mahendran M (2014b) Post-fire mechanical
properties of cold-formed steels. In: European conference
on steel and composite structures, Eurosteel, 10–12 Septem-
ber, Naples.Gunalan S and Mahendran M (2014c) Web crippling tests of
cold-formed steel channels under two flange load cases.
Journal of Constructional Steel Research 101: 1–15.Gunalan S, Heva YB and Mahendran M (2014) Design of
cold-formed steel columns at elevated temperatures sub-
ject to flexural-torsional buckling. In: European conference
on steel and composite structures, Eurosteel, 10–12 Septem-
ber, Naples.Gunalan S, Kolarkar P and Mahendran M (2013) Experi-
mental study of load bearing cold-formed steel wall sys-
tems under fire conditions. Thin-Walled Structures 65:
72–92.
Guo Y, Yao X and Liu K (2014) Design method of bending
load-carrying for sandwich panels with different metal
panel on both sides. In: 22nd international specialty confer-
ence on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 511–524. Rolla, MO: Missouri
University of Science and Technology.Gutierrez R, Loureiro A, Reinosa JM, et al. (2013) Numeri-
cal study of purlin joints with sleeve connections. Thin-
Walled Structures 62: 214–224.Hancock GJ (2003) Cold-formed steel structures. Journal of
Constructional Steel Research 59: 473–487.Hancock GJ and Pham CH (2013) Shear buckling of channel
sections with simply supported ends using the semi-
analytical finite strip method. Thin-Walled Structures 71:
72–80.Hancock GJ and Pham CH (2014a) Buckling analysis of
thin-walled sections under localised loading using the
semi-analytical finite strip method. In: 7th international
conference on thin-walled structures, Busan, Korea, 28
September–2 October (ICTWS2014-0703).Hancock GJ and Pham CH (2014b) Developments in the
finite strip buckling analysis of plates and channel sections
under localised loading. In: 22nd international specialty
conference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 295–310. Rolla, MO: Mis-
souri University of Science and Technology.Hanna MT (2014) Structural performance of steel cold
formed sections portal frames. In: European conference on
steel and composite structures, Eurosteel, 10–12 Septem-
ber, Naples.He Z and Zhou X (2014) Strength design curves and an effec-
tive width formula for cold-formed steel columns with dis-
tortional buckling. Thin-Walled Structures 79: 62–70.He Z, Zhou X, Liu Z, et al. (2014) Post-buckling behaviour
and DSM design of web-stiffened lipped channel columns
with distortional and local mode interaction. Thin-Walled
Structures 84: 189–203.Hernandez-Castillo LA, Ortiz-Lozano JA, Hernandez-Marin
M, et al. (2014) Fragility curves for thin-walled cold-
formed steel wall frames affected by ground settlements
due to land subsidence. In: 22nd international specialty
conference on cold-formed steel design and construction, St
Louis, MO, 5-6 November, pp. 857–872. Rolla, MO: Mis-
souri University of Science and Technology.Iuorio O, Macillo V, Terracciano MT, et al. (2014a) Evalua-
tion of the seismic performance of light gauge steel walls
braced with flat straps. In: 22nd international specialty
conference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 841–856. Rolla, MO: Mis-
souri University of Science and Technology.Iuorio O, Macillo V, Terracciano MT, et al. (2014b) Seis-
mic response of CFS strap-braced stud walls: experi-
mental investigation. Thin-Walled Structures 85:
466–480.Javaheri-Tafti MR, Ronagh HR, Behnamfar F, et al. (2014)
An experimental investigation on the seismic behavior of
cold-formed steel walls sheathed by thin steel plates. Thin-
Walled Structures 80: 66–79.
Hancock 11
Kalavagunta S, Naganathan SK and Mustapha NB (2013)
Proposal for design rules of axially loaded CFRP
strengthened cold formed lipped channel steel sections.
Thin-Walled Structures 72: 14–19.Karakonstantis V and Becque J (2014) Modal classification
and decomposition of instabilities in thin-walled struc-
tural members. In: 7th international conference on thin-
walled structures, Busan, Korea, 28 September–2 October
(ICTWS2014-0705).Keerthan P and Mahendran M (2013a) Experimental studies
of the shear behaviour and strength of lipped channel
beams with web openings. Thin-Walled Structures 73:
131–144.Keerthan P and Mahendran M (2013b) New design rules for
the shear strength of LiteSteel beams with web openings.
Journal of Structural Engineering 139(5): 640–656.Keerthan P and Mahendran M (2013c) Suitable stiffening
systems for LiteSteel beams with web openings subjected
to shear. Journal of Constructional Steel Research 80:
412–428.Keerthan P and Mahendran M (2014a) Direct strength
method based design for hollow flange channel beams
subject to web crippling. In: 7th international conference
on thin-walled structures, Busan, Korea, 28 September–2
October (ICTWS2014-0203).
Keerthan P and Mahendran M (2014b) Improved shear
design rules for lipped channel beams with web openings.
Journal of Constructional Steel Research 97: 127–142.Keerthan P and Mahendran M (2014c) Numerical modelling
and design of lipped channel beams subject to shear. In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Keerthan P and Mahendran M (2014d) Web crippling tests
of hollow flange channel beams – end one flange and inte-
rior one flange load cases. In: European conference on
steel and composite structures, Eurosteel, 10–12 Septem-
ber, Naples.Keerthan P, Hughes D and Mahendran M (2014a) Experi-
mental studies of hollow flange channel beams subject to
combined bending and shear actions. Thin-Walled Struc-
tures 77: 129–140.Keerthan P, Mahendran M and Steau E (2014b) Experimen-
tal study of web crippling behaviour of hollow flange
channel beams under two flange load cases. Thin-Walled
Structures 85: 207–219.Kubde PW and Sangle KK (2014) Determination of load
carrying capacity of perforated cold formed steel column
using direct strength method. In: 7th international confer-
ence on thin-walled structures, Busan, Korea, 28 Septem-
ber–2 October (ICTWS2014-S0202).Kujawa M and Szymczak C (2014) Numerical and experi-
mental investigation of rotational stiffness of zed-purlins
connection with sandwich panels. Thin-Walled Structures
75: 43–52.Kulatunga MP and Macdonald M (2013) Investigation of
cold-formed steel structural members with perforations of
different arrangements subjected to compression loading.
Thin-Walled Structures 66: 78–87.
Kulatunga MP and Macdonald M (2014) The efficient
design of cold formed perforated thin-walled steel struc-
tural members subjected to compression loading. In: 7th
international conference on thin-walled structures, Busan,
Korea, 28 September–2 October(ICTWS2014-S0207).Kulatunga MP, Macdonald M, Rhodes J, et al. (2014) Load
capacity of cold-formed column members of lipped chan-
nel cross-section with perforations subjected to compres-
sion loading – Part I: FE simulation and test results. Thin-
Walled Structures 80: 1–12.Kumar MVA and Kalyanaraman V (2014) Distortional
buckling of CFS stiffened lipped channel compression
members. Journal of Structural Engineering 140(12):
04014099.Laım L, Rodrigues JPC and Craveiro HD (2014a) Numerical
modeling and analysis on the flexural behaviour of cold-
formed steel beams. In: European conference on steel and
composite structures, Eurosteel, 10–12 September, Naples.Laım L, Rodrigues JPC and da Silva LS (2013) Experimental
and numerical analysis on the structural behaviour of
cold-formed steel beams. Thin-Walled Structures 72: 1–13.Laım L, Rodrigues JPC and da Silva LS (2014b) Experimen-
tal analysis on cold-formed steel beams subjected to fire.
Thin-Walled Structures 74: 104–117.Lambiase F and Di Ilio A (2014) An experimental study on
clinched joints realized with different dies. Thin-Walled
Structures 85: 71–80.Landesmann A and Camotim D (2013) On the direct strength
method (DSM) design of cold-formed steel columns
against distortional failure. Thin-Walled Structures 66:
168–187.Lawson RM and Popo-Ola S (2013) Load capacity of con-
tinuous decking based on small-scale tests. Thin-Walled
Structures 69: 79–90.Leng J, Li Z, Guest JK, et al. (2014) Shape optimization of
cold-formed steel columns with fabrication and geometric
end-use constraints. Thin-Walled Structures 85: 271–290.Li Y, Li Y and Song Y (2014a) Experimental investigation
on ultimate capacity of eccentrically-compressed cold-
formed beam-columns with lipped channel sections. In:
22nd international specialty conference on cold-formed steel
design and construction, St Louis, MO, 5–6 November,
pp. 393–406. Rolla, MO: Missouri University of Science
and Technology.Li Y, Li Y, Wang S, et al. (2014b) Ultimate load-carrying
capacity of cold-formed thin-walled columns with built-
up box and I section under axial compression. Thin-
Walled Structures 79: 202–217.Li Y, Ma R and Shen Z (2014c) Numerical simulation on
dynamic behavior of a cold-formed steel framing building
test model. In: 22nd international specialty conference on
cold-formed steel design and construction, St Louis, MO,
5–6 November, pp. 873–886. Rolla, MO: Missouri Uni-
versity of Science and Technology.Li Y, Shen Z, Yao X, et al. (2013) Experimental investigation
and design method research on low-rise cold-formed thin-
walled steel framing buildings. Journal of Structural Engi-
neering 139(5): 818–836.
12 Advances in Structural Engineering
Li Y, Xu Z, Li Y, et al. (2014d) Investigation on seismic per-
formance of cold-formed steel portal frames. In: 22nd
international specialty conference on cold-formed steel
design and construction, St Louis, MO, 5–6 November,
pp. 633–642. Rolla, MO: Missouri University of Science
and Technology.Li Z, Abreu JCB, Leng J, et al. (2014e) Review: constrained
finite strip method developments and applications in cold-
formed steel design. Thin-Walled Structures 81: 2–18.Lim JBP, Hancock GJ, Clifton GC, et al. (2014) Direct
strength method for ultimate strength of bolted moment-
connections between cold-formed steel channel members.
In: 22nd international specialty conference on cold-formed
steel design and construction, St Louis, MO, 5–6 Novem-
ber, pp. 729–744. Rolla, MO: Missouri University of Sci-
ence and Technology.Lin SH, Pan CL and Hsu WT (2014) Monotonic and cyclic
loading tests for cold-formed steel wall frames sheathed
with calcium silicate board. Thin-Walled Structures 74:
48–49.Liu J, Xu L and Fox S (2014) Structural strength of lapped
cold-formed steel Z-shaped purlin connections with verti-
cal slotted holes. In: 22nd international specialty confer-
ence on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 697–712. Rolla, MO: Missouri
University of Science and Technology.Loughlan J and Yidris N (2014) The local–overall flexural
interaction of fixed-ended plain channel columns and the
influence on behaviour of local conditions at the constitu-
ent plate ends. Thin-Walled Structures 81: 132–137.Loureiro A and Calvo R (2014) Experimental results of a
completed Z-purlings system. In: European conference on
steel and composite structures, Eurosteel, 10–12 Septem-
ber, Naples.qukowicz A and Urbanska-Galewska E (2014) Deformations
of innovative cold-formed ‘GEB’ sections. In: European
conference on steel and composite structures, Eurosteel, 10–
12 September, Naples.Macdonald M and Kulatunga MP (2014) The effects of end
conditions on the load capacity of cold-formed steel col-
umn members of lipped channel cross-section with per-
forations subjected to compression loading. In: 22nd
international specialty conference on cold-formed steel
design and construction, St Louis, MO, November, pp.
129–142.Macillo V, Iuorio O, Terracciano MT, et al. (2014) Seismic
response of Cfs strap-braced stud walls: theoretical study.
Thin-Walled Structures 85: 301–312.Martins AD, Dinis PB, Camotim D, et al. (2014a) Local-
distortional interaction in web-stiffened LC columns:
post-buckling behaviour, strength and DSM design. In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Martins AD, Dinis PB, Camotim D, et al. (2014b) On the
influence of local-distortional interaction in the behavior
and design of cold-formed steel web-stiffened lipped chan-
nel columns. In: 22nd international specialty conference on
cold-formed steel design and construction, St Louis, MO,
5–6 November, pp. 171–192. Rolla, MO: Missouri Uni-
versity of Science and Technology.Mathieson CD, Clifton GC and Lim JBP (2014) Develop-
ment of a novel pinned connection for cold-formed steel
trusses. In: 22nd international specialty conference on cold-
formed steel design and construction, St Louis, MO, 5–6
November, pp. 745–760. Rolla, MO: Missouri University
of Science and Technology.Moen CD, Padilla-Llano DA, Corner SA, et al. (2014)
Towards load-deformation models for screw-fastened
cold-formed steel-to-shear shear connections. In: 22nd
international specialty conference on cold-formed steel
design and construction, St Louis, MO, 5–6 November,
pp. 761–774. Rolla, MO: Missouri University of Science
and Technology.Moen CD, Schudlich A and von der Heyden A (2013)
Experiments on cold-formed steel C-section joists with
unstiffened web holes. Journal of Structural Engineering
139(5): 695–704.Moharrami M, Louhghalam A and Tootkaboni M (2014)
Optimal folding of cold formed steel cross sections under
compression. Thin-Walled Structures 76: 145–156.Mucha J and Witkowski W (2014) The clinching joints
strength analysis in the aspects of changes in the forming
technology and load conditions. Thin-Walled Structures
82: 55–66.Natario P, Silvestre N and Camotim D (2014a) Computa-
tional modelling of flange crushing in cold-formed steel
sections. Thin-Walled Structures 84: 393–405.
Natario P, Silvestre N and Camotim D (2014b) Web crip-
pling failure using quasi-static FE models. Thin-Walled
Structures 84: 34–49.Nedelcu M, Crisan A, Ungureanu V, et al. (2014) Analysis of
storage rack members by using GBT and shell FEA. In:
7th international conference on thin-walled structures, Busan,
Korea, 28 September–2 October (ICTWS2014-S0208).Nguyen VB, English MA and Castellucci MA (2014) Finite
element analysis of cold-formed dimpled steel columns.
In: 22nd international specialty conference on cold-formed
steel design and construction, St Louis, MO, 5–6 Novem-
ber, pp. 115–128. Rolla, MO: Missouri University of Sci-
ence and Technology.Ostwald M and Rodak M (2013) Multicriteria optimization
of cold-formed thin-walled beams with generalized open
shape under different loads. Thin-Walled Structures 65:
26–33.Ozaki F, Kawai Y, Kanno R, et al. (2013) Damage-control
systems using replaceable energy-dissipating steel fuses
for cold-formed steel structures: seismic behavior by
shake table tests. Journal of Structural Engineering 139(5):
787–795.Paczos P (2014) Experimental investigation of C-beams with
non-standard flanges. Journal of Constructional Steel
Research 93: 77–87.Padilla-Llano DA, Moen CD and Eatherton MR (2014a)
Cyclic axial response and energy dissipation of cold-
formed steel framing members. Thin-Walled Structures
78: 95–107.
Hancock 13
Padilla-Llano DA, Moen CD and Eatherton MR (2014b)
Local buckling hysteretic nonlinear models for cold-
formed steel axial members. In: 22nd international
specialty conference on cold-formed steel design and con-
struction, St Louis, MO, 5–6 November, pp. 919–929.
Rolla, MO: Missouri University of Science and
Technology.Padilla-Llano DA, Moen CD, Eatherton MR, et al. (2014c)
Cyclic flexural hysteretic models for cold-formed steel
seismic simulation. In: European conference on steel and
composite structures, Eurosteel, 10–12 September, Naples.Pali T, Iuorio O, Macillo V, et al. (2014) Seismic behaviour
of ‘all-steel’ CFS structures: experimental Tests. In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Peterman KD and Schafer BW (2014) Sheathed cold-formed
steel studs under axial and lateral load. Journal of Struc-
tural Engineering 140(10): 04014074.Peterman KD, Madsen R and Schafer BW (2014) Experi-
mental seismic behavior of the CFS-NEES building:
system-level performance of a full-scale two-story light
steel framed building. In: 22nd international specialty con-
ference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 887–902. Rolla, MO:
Missouri University of Science and Technology.Pham CH and Hancock GJ (2013a) Experimental investiga-
tion and direct strength design of high-strength, complex
C-sections in pure bending. Journal of Structural Engineer-
ing 139(11): 1842–1852.Pham CH and Hancock GJ (2013b) Shear buckling of chan-
nels using the semi-analytical and spline finite strip meth-
ods. Journal of Constructional Steel Research 90: 42–48.
Pham CH and Hancock GJ (2014) Numerical investigation
of longitudinally stiffened web channels predominantly
in shear. In: 7th international conference on thin-walled
structures, Busan, Korea, 28 September–2 October
(ICTWS2014-0304).Pham CH, Bruneau LA, Chin YH, et al. (2014a) New devel-
opments in the direct strength method of design for cold-
formed sections subject to shear. In: European conference
on steel and composite structures, Eurosteel, 10–12 Septem-
ber, Naples.Pham CH, Chin YH, Boutros P, et al. (2014b) The behaviour
of cold-formed C-sections with square holes in shear. In:
22nd international specialty conference on cold-formed steel
design and construction, St Louis, MO. November, 5–6
November, pp. 311–328. Rolla, MO: Missouri University
of Science and Technology.Pham CH, Davis AF and Emmett BR (2014c) Numerical
investigation of cold-formed lapped Z purlins under com-
bined bending and shear. Journal of Constructional Steel
Research 95: 116–125.Pham SH, Pham CH and Hancock GJ (2014d) Direct strength
method of design for shear including sections with longitu-
dinal web stiffeners. Thin-Walled Structures 81: 19–28.Phan DC, Woon KS, Wrzesien AM, et al. (2014a) Investiga-
tion of stressed-skin effect on building length of cold-
formed steel portal frame. In: 7th international conference
on thin-walled structures, Busan, Korea, 28 September–2
October (ICTWS2014-S0211).Phan DT, Wrzesien AM, Lim JBP, et al. (2014b) Effect of
stressed-skin action on optimal design of a cold-formed
steel portal framing system. In: 22nd international speci-
alty conference on cold-formed steel design and construc-
tion, St Louis, MO, 5–6 November, pp. 661–678. Rolla,
MO: Missouri University of Science and Technology.Piyawat K, Ramseyer C and Kang THK (2013) Development
of an axial load capacity equation for doubly symmetric
built-up cold-formed sections. Journal of Structural Engi-
neering 139(12): 04013008.Rasmussen KJR and Gilbert BP (2013) Analysis-based
design provisions for steel storage racks. Journal of Struc-
tural Engineering 139(5): 849–859.Ren C and Zhao X (2014) Influence of diagonal bracing
restraint on cold-formed steel perforated columns under
axial compression. In: 22nd international specialty confer-
ence on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 601–616. Rolla, MO: Missouri
University of Science and Technology.Rizzi NL, Varano V and Gabriele S (2013) Initial postbuck-
ling behavior of thin-walled frames under mode interac-
tion. Thin-Walled Structures 68: 124–134.Sabbagh AB, Petkovski M, Pilakoutas K, et al. (2013) Cyclic
behaviour of bolted cold-formed steel moment connec-
tions: FE modelling including slip. Journal of Construc-
tional Steel Research 80: 100–108.Santos ES, Dinis PB, Batista EM, et al. (2014) Cold-formed
steel lipped channel columns undergoing local-distor-
tional-global interaction: experimental and numerical
investigation. In: 22nd international specialty conference
on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 193–212. Rolla, MO: Missouri
University of Science and Technology.Seek M (2014) Improvements to the prediction of brace
forces in Z-purlin roof systems with support + third
point portion bracing. In: 22nd international specialty con-
ference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 557–570. Rolla, MO:
Missouri University of Science and Technology.Selvaraj S and Madhavan M (2014) Study on partially closed
built-up sections using cold formed steel with geometric
imperfection combinations under axial compression. In:
7th international conference on thin-walled structures,
Busan, Korea, 28 September–2 October (ICTWS2014-
S0707).Shahbazian A and Wang YC (2013) A simplified approach
for calculating temperatures in axially loaded cold-formed
thin-walled steel studs in wall panel assemblies exposed to
fire from one side. Thin-Walled Structures 64: 60–72.Shahbazian A and Wang YC (2014) A fire resistance design
method for thin-walled steel studs in wall panel construc-
tions exposed to parametric fires. Thin-Walled Structures
77: 67–76.Shahi R, Lam N, Gad E, et al. (2014) In-plane behavior of
cold-formed steel-framed wall panels sheathed with fibre
cement board. In: 22nd international specialty conference
14 Advances in Structural Engineering
on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 809–825. Rolla, MO: Missouri
University of Science and Technology.Shakibanasab A, Attari NKA and Salari M (2014) A statis-
tical and experimental investigation into the accuracy of
capacity reduction factor for cold-formed steel shear
walls with steel sheathing. Thin-Walled Structures 77:
56–66.Shamim I and Rogers CA (2013) Steel sheathed/CFS framed
shear walls under dynamic loading: numerical modelling
and calibration. Thin-Walled Structures 71: 57–71.Shifferaw Y and Schafer BW (2014) Cold-formed steel lipped
and plain angle columns with fixed ends. Thin-Walled
Structures 80: 142–152.Shimizu N, Kanno R, Ikarashi K, et al. (2013) Cyclic beha-
vior of corrugated steel shear diaphragms with end failure.
Journal of Structural Engineering 139(5): 796–806.Siahaan R, Keerthan P and Mahendran M (2014a) Numeri-
cal studies of rivet-fastened rectangular hollow flange
channel beams. In: 22nd international specialty conference
on cold-formed steel design and construction, St Louis,
MO, November, 5–6 November, pp. 259–276. Rolla, MO:
Missouri University of Science and Technology.Siahaan R, Keerthan P and Mahendran M (2014b) Section
moment capacity tests of rivet-fastened rectangular hol-
low flange channel beams. In: 22nd international specialty
conference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 277–294. Rolla, MO: Mis-
souri University of Science and Technology.
Silvestre N, Dinis PB and Camotim D (2013) Developments
on the design of cold-formed steel angles. Journal of Struc-
tural Engineering 139(5): 680–694.Sivapathasundaram M and Mahendran M (2014) Pull-
through failure tests of thin steel roof battens under wind
uplift loads. In: 22nd international specialty conference on
cold-formed steel design and construction, St Louis, MO,
5–6 November, pp. 679–696. Rolla, MO: Missouri Uni-
versity of Science and Technology.Smith FH and Moen CD (2014) Finite strip elastic buckling
solutions for thin-walled metal columns with perforation
patterns. Thin-Walled Structures 79: 187–201.Taig G, Ranzi G, Piccardo G, et al. (2014) A dynamic approach
for generalised beam theory including extension and shear
modes. In: 7th international conference on thin-walled struc-
tures, Busan, Korea, 28 September–2 October (ICTWS2014-
S0301).Teh LH and Gilbert BP (2013a) Net section tension capacity
of cold-reduced sheet steel angle braces bolted at one leg.
Journal of Structural Engineering 139(3): 328–337.Teh LH and Gilbert BP (2013b) Net section tension capacity
of cold-reduced sheet steel channel braces bolted at the
web. Journal of Structural Engineering 139(5): 740–747.Teh LH and Gilbert BP (2014a) Design equations for tensile
rupture resistance of bolted connections in cold-formed
steel members. In: 22nd international specialty conference
on cold-formed steel design and construction, St Louis,
MO, 5–6 November, pp. 713–728. Rolla, MO: Missouri
University of Science and Technology.
Teh LH and Gilbert BP (2014b) Net section tension capacity
of equal angle braces bolted at different legs. Journal of
Structural Engineering 140(6): 06014002.Terracciano MT, Macillo V, Iuorio O, et al. (2014) Seismic
behaviour of ‘all-steel’ CFS structures: design criteria, In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Tian HW, Li YQ and Yu C (2013) Testing of steel sheathed
cold-formed steel trussed shear walls. Thin-Walled Struc-
tures 62: 280–292.Ting TCH and Lau HH (2014a) Thickness reduction method
(TReM) for axially loaded cold-formed steel back-to-back
C-channel built-up columns Part 1: design. In: 7th interna-
tional conference on thin-walled structures, Busan, Korea,
28 September–2 October (ICTWS2014-0205).Ting TCH and Lau HH (2014b) Thickness reduction method
(TReM) for axially loaded cold-formed steel back-to-back
C-channel built-up columns Part 2: experiment. In: 7th
international conference on thin-walled structures, Busan,
Korea, 28 September–2 October (ICTWS2014-0206).Tondini N and Morbioli A (2014) Experimental analysis of
cold-formed steel rectangular hollow flange sections. In:
European conference on steel and composite structures,
Eurosteel, 10–12 September, Naples.Torabian S, Zheng B and Schafer BW (2014) Development
of a new beam-column design method for cold-formed
steel lipped channel members. In: 22nd international speci-
alty conference on cold-formed steel design and construc-
tion, St Louis, MO, 5–6 November, pp. 359–376. Rolla,
MO: Missouri University of Science and Technology.Trouncer AN and Rasmussen KJR (2014) Flexural–torsional
buckling of ultra light-gauge steel storage rack uprights.
Thin-Walled Structures 81: 159–174.Ungermann D, Lubke S and Brune B (2014) Tests and design
approach for plain channels in local and coupled local-
flexural buckling based on Eurocode 3. Thin-Walled
Structures 81: 108–120.Uzzaman A, Lim JBP, Nash D, et al. (2013) Effect of offset
web holes on web crippling strength of cold-formed steel
channel sections under end-two-flange loading condition.
Thin-Walled Structures 66: 34–48.Uzzaman A, Wrzesien A, Hamilton R, et al. (2014) Numeri-
cal investigation of cold-formed steel top hat purlins. In:
22nd international specialty conference on cold-formed steel
design and construction, St Louis, MO, 5–6 November, pp.
571–586. Rolla, MO: Missouri University of Science and
Technology.Vieira LCMJr and Schafer BW (2013) Behavior and design
of sheathed cold-formed steel stud walls under compres-
sion. Journal of Structural Engineering 139(5): 772–786.Vigh LG, Deierlein GG, Miranda E, et al. (2013) Seismic per-
formance assessment of steel corrugated shear wall system
using non-linear analysis. Journal of Constructional Steel
Research 85: 48–59.Wang B, Gilbert BP, Molinier AM, et al. (2014a) Shape opti-
misation of cold-formed steel profiles with manufacturing
constraints – Part I: algorithm. In: 22nd international spe-
cialty conference on cold-formed steel design and
Hancock 15
construction, St Louis, MO, 5–6 November, pp. 21–36.Rolla, MO: Missouri University of Science andTechnology.
Wang B, Gilbert BP, Molinier AM, et al. (2014b) Shapeoptimisation of cold-formed steel profiles with manufac-turing constraints – Part II: applications. In: 22nd inter-
national specialty conference on cold-formed steel design
and construction, St Louis, MO, 5–6 November, pp. 37–50. Rolla, MO: Missouri University of Science andTechnology.
Wang FL, Yang J and Lim J (2014c) Numerical studies ofcollapse behaviour of multi-span beams with cold-formedsigma sections. In: 22nd international specialty conference
on cold-formed steel design and construction, St Louis,MO, 5–6 November, pp. 345–358. Rolla, MO: MissouriUniversity of Science and Technology.
Wang L and Young B (2014a) Cold-formed steel channelsections with web stiffeners subjected to local and distor-tional buckling – Part I: tests and finite element analysis.In: 22nd international specialty conference on cold-formed
steel design and construction, St Louis, MO, 5–6 Novem-ber, pp. 229–242. Rolla, MO: Missouri University of Sci-ence and Technology.
Wang L and Young B (2014b) Cold-formed steel channelsections with web stiffeners subjected to local and distor-tional buckling – Part II: parametric study and designrule. In: 22nd international specialty conference on cold-
formed steel design and construction, St Louis, MO, 5–6
November, pp. 243–258. Rolla, MO: Missouri Universityof Science and Technology.
Wang L and Young B (2014c) Design of cold-formed steelchannels with stiffened webs subjected to bending. Thin-Walled Structures 85: 81–92.
Wang T, Zhao X and Chen Y (2014d) Calculation formoment capacity of beam-to-upright connections of steelstorage pallet racks. In: 22nd international specialty con-
ference on cold-formed steel design and construction, StLouis, MO, 5–6 November, pp. 587–600. Rolla, MO:Missouri University of Science and Technology.
Wrzesien AM, Lim JBP and Lawson RM (2014) Effect ofstressed-skin action on the behaviour of cold-formed steelportal frames. In: 22nd international specialty conference
on cold-formed steel design and construction, St Louis,MO, 5–6 November, pp. 643–660. Rolla, MO: MissouriUniversity of Science and Technology.
Xu L, Shi Y and Yang S (2014) Compressive strength of cold-formed steel C-shape columns with slotted holes. In: 22ndinternational specialty conference on cold-formed steel design
and construction, St Louis, MO, 5–6 November, pp. 157–170. Rolla, MO: Missouri University of Science andTechnology.
Yan S and Young B (2013) Effects of elevated temperatureson double shear bolted connections of thin sheet steels.Journal of Structural Engineering 139(5): 757–771.
Yanagi N and Yu C (2014) Effective strip method for thedesign of cold-formed steel framed shear wall with steelsheet sheathing. Journal of Structural Engineering 140(4):04013101.
Ye W, Wang CJ, Mynors DJ, et al. (2013) Load–deflectionbehaviour of sleeved joints in modified Z purlin system.Thin-Walled Structures 73: 318–328.
Young B, Silvestre N and Camotim D (2013) Cold-formedsteel lipped channel columns influenced by local-distortional interaction: strength and DSM design. Jour-nal of Structural Engineering 139(6): 1059–1074.
Yu C and Panyanouvong MX (2013) Bearing strength ofcold-formed steel bolted connections with a gap. Thin-
Walled Structures 66: 110–115.Yu C and Xu K (2013) Shear strength of a cold-formed steel
sheet in bolted connections using oversized holes. Journalof Structural Engineering 139(5): 860–864.
Yu C, Yu G and Wang J (2014) Innovative cold-formed steelframed shear wall sheathed with corrugated steel sheets:experiments and dynamic analysis. In: 22nd international
specialty conference on cold-formed steel design and construc-
tion, St Louis, MO, 5–6 November, pp. 775–792. Rolla, MO:Missouri University of Science and Technology.
Yuan XL and Xu L (2014) Simplified seismic design for mid-rise buildings with vertical combination of cold-formed
steel and concrete framing. In: 22nd international specialty
conference on cold-formed steel design and construction, StLouis, MO, 5–6 November, pp. 617–632. Rolla, MO: Mis-souri University of Science and Technology.
Zhang X and Rasmussen K (2014) Tests of cold-formed steelportal frames with slender sections. In: European confer-
ence on steel and composite structures, Eurosteel, 10–12September, Naples.
Zhao X and Schafer BW (2014) Laser scanning to developthree-dimensional fields for the precise geometry of cold-formed steel members. In: 22nd international specialty con-
ference on cold-formed steel design and construction, St
Louis, MO, 5–6 November, pp. 97–114. Rolla, MO: Mis-souri University of Science and Technology.
Zhao X, Wang T, Chen Y, et al. (2014) Flexural behavior ofsteel storage rack beam-to-upright connections. Journal ofConstructional Steel Research 99: 161–175.
Zhou XH, Shi Y, Wang RC, et al. (2014) Study on the flex-ural capacity of cold-formed steel joists-OSB compositefloors. In: 22nd international specialty conference on cold-
formed steel design and construction, St Louis, MO, 5–6November, pp. 495–511. Rolla, MO: Missouri Universityof Science and Technology.
16 Advances in Structural Engineering