Advantages of CLScamera lowering systems

These slide pictures supplementthe documentation regarding the advantages of the CLS cameralowering device.

Gold plated – Nickel plated – Copper Pins withChamfered gold plated sockets

Heavy Dutypins

Chamfered socketsto ensure proper mating

CLS Composite Cable

RG-59 coax

Two individually shieldedTwisted pairs, with drainFor data

14ga. wires for power

Spares

UV resistantPVC jacket

Heat shrinknear connectorfor addedelement protection

Environmentally Sealed Connectors

Composite cable components arewired directly into the connector and permanentlysealed from the environment, including coaxial cable

Environmentally Sealed Connectors

Cable is potted and sealed withSuperflex to withstand moisture, corrosive elements and temperature changes

Ground wire to castingensures grounds mateand break first

Spring loaded connectorensures tight connectionunder windy or vibratoryconditions

Complete Connector Assembly

Spring loaded connectorensures tight connectionunder windy or vibratoryconditions

Locking mechanism

Advantage of CLS direct wired composite cableover wire lead molded connectors

(these splices not required with CLS 16HD)

For connector system with wire leads, apole top splice is required for all leads

Wire lead styleconnector

Pole top splicing for coax cablerequired for wire lead style connectors

(these splices not required with CLS 16HD)

Coaxial cable center conductor and shield mustbe spliced to wire leads. Splicing of the shield is difficult and can cause signal degradation

Round arm interlocking key notch

Both ends of the lowering device arm have interlockingkey positions for the round arm to ensure it is locked in placeand cannot rotate once installed.

Composite cable is providedcustom length from top of poleto CCTV cabinet. No splices required.

Environmental Seal on Junction Box Connection

Gasket fits snugly inside bell housingproviding environmental seal

Bell Housing to Junction Box Seal

Gasketprovidesenvironmentalseal

CLS Junction Box BenefitsSafety latches

Standard 1.5” NPTthread for mounting anydome camera without special adapters

Ample room for lightning protection devices

Continuous gasketfor weather resistance

Exterior of Junction Box

Overlapping lip diverts waterand adds to weather resistance